FloDots: luminescent nanoparticles

Measuring the fluorescent quantum efficiency of indocyanine green encapsulated in nanocomposite particulates

We present results of a fluorescent quantum efficiency (Φ(F)) study on the encapsulation of the near-infrared dye indocyanine green (ICG) in bioresorbable calcium phosphate nanoparticles (CPNPs). The Φ(F) (described as the ratio of photons emitted to photons absorbed) provides a quantitative means of describing the fluorescence of an arbitrary molecule. However, standard quantum efficiency measurement techniques provide only the Φ(F) of the smallest fluorescing unit-in the case of a nanoparticle suspension, the nanoparticle itself. This presents a problem in accurately describing the Φ(F) of fluorophores embedded in an inorganic nanoparticle. Combining the incidence of scattering with an evaluation of the differences in local electric field and photochemical environment, we have developed a method to determine the Φ(F) of the constituent fluorescent molecules embedded in such a nanoparticle, which provides a more meaningful comparison with the unencapsulated fluorophore. While applicable to generic systems, we present results obtained by our method for the ICG-CPNP in a phosphate buffered 0.15 M saline solution (PBS, pH 7.4)--specifically, Φ(F, free dye) = 0.027 ± 0.001, Φ(F, particle) = 0.053 ± 0.003, and for the individual encapsulated molecules, Φ(F, molecule) = 0.066 ± 0.004. The method developed also provides insight into the influences of encapsulation and key parameters to engineer resonant enhancement effects from the emission of the encapsulated fluorophores corresponding to an eigenmode of the embedding particle for tailored optical properties.

High-resolution light microscopy using luminescent nanoparticles

This review presents recent progress in the development of the luminescent nanoparticles for confocal and multiphoton microscopy. Four classes of nanomaterials are discussed: (1) silica-based nanoparticles doped with fluorescent molecules, (2) gold nanoparticles, (3) semiconductor nanocrystals (quantum dots/rods), and (4) nanophosphors. Special considerations are given to recently developed imaging nanoprobes, such as (1) organically modified silica (ORMOSIL) nanoparticles doped with two-photon absorbing fluorophores, which exhibit aggregation-enhanced fluorescence (AEF), and (2) nanophosphors (ceramic nanoparticles containing luminescent lanthanoid ions). Advantages and disadvantages of every class of nanomaterials and their specific applications are briefly discussed.

Energy transfer from silica core-surfactant shell nanoparticles to hosted molecular fluorophores

Very monodisperse water-soluble silica core-surfactant shell nanoparticles (SCSS NPs) doped with a rhodamine B derivative were prepared using micelles of F127 as nanoreactors for the hydrolysis and condensation of the silica precursor tetraethoxysilane (TEOS). The functionalization of the rhodamines with a triethoxysilane group allowed the covalent binding of the fluorophores to the silica core: no leaking of the dye was observed when the NPs were purified either by ultrafiltration (UF) or dialysis. The diameter of the core (d(c) = 10 ± 1 nm) was determined by TEM and subtracted from the hydrodynamic diameter, measured by DLS, (d(H) = 24 nm, PdI = 0.1) to calculate the shell thickness (∼7 nm). The presence of a single population of NPs with a radius compatible with the one measured by DLS after UF was confirmed by AF4-MALS-RI measurements. The concentration of the NPs was measured by MALS-RI. This allowed us to determine the average number of rhodamine molecules per NP (10). The ability of the NPs to host hydrophobic species as cyanines in the SS was confirmed by fluorescence anisotropy measurements. Steady-state and time-resolved fluorescence measurements allowed us to observe the occurrence of a very efficient Förster resonance energy transfer process from the covalently linked rhodamines to the hosted cyanines. In particular, the analysis of the TCSPC data and steady-state measurements revealed that the adsorption of a single cyanine molecule causes an almost complete quenching of the fluorescence of the NP. Thanks to these observations, it was possible to easily determine the concentration of the NPs by fluorescence titration experiments. Results are in good agreement with the concentration values obtained by MALS-RI. Finally, the hosted cyanine molecule could be extracted with (±)-2-octanol, demonstrating the reversibility of the adsorption process.

Fluorescent nanoparticle-based indirect immunofluorescence microscopy for detection of Mycobacterium tuberculosis

A method of fluorescent nanoparticle-based indirect immunofluorescence microscopy (FNP-IIFM) was developed for the rapid detection of Mycobacterium tuberculosis. An anti-Mycobacterium tuberculosis antibody was used as primary antibody to recognize Mycobacterium tuberculosis, and then an antibody binding protein (Protein A) labeled with Tris(2,2-bipyridyl)dichlororuthenium(II) hexahydrate (RuBpy)-doped silica nanoparticles was used to generate fluorescent signal for microscopic examination. Prior to the detection, Protein A was immobilized on RuBpy-doped silica nanoparticles with a coverage of ∼5.1×102 molecules/nanoparticle. With this method, Mycobacterium tuberculosis in bacterial mixture as well as in spiked sputum was detected. The use of the fluorescent nanoparticles reveals amplified signal intensity and higher photostability than the direct use of conventional fluorescent dye as label. Our preliminary studies have demonstrated the potential application of the FNP-IIFM method for rapid detection of Mycobacterium tuberculosis in clinical samples.

Nanotechnology and molecular cytogenetics: the future has not yet arrived

Quantum dots (QDs) are a novel class of inorganic fluorochromes composed of nanometer-scale crystals made of a semiconductor material. They are resistant to photo-bleaching, have narrow excitation and emission wavelengths that can be controlled by particle size and thus have the potential for multiplexing experiments. Given the remarkable optical properties that quantum dots possess, they have been proposed as an ideal material for use in molecular cytogenetics, specifically the technique of fluorescent in situ hybridisation (FISH). In this review, we provide an account of the current QD-FISH literature, and speculate as to why QDs are not yet optimised for FISH in their current form.

Detection of microRNA by fluorescence amplification based on cation-exchange in nanocrystals

Small RNA molecules are effective regulators of gene expression, and the expression signature of one subgroup of small RNA, the microRNA (miRNA), has been linked to disease development and progression. Therefore, detection of small RNA in biological samples will greatly improve the understanding of their functions and render effective tools to researchers for cellular process control and disease prevention. To solve the challenges in detecting the low-abundance and short strand-length of small RNA molecules, we designed a ligation-assisted binding assay and applied the cation exchange-based fluorescence amplification (CXFluoAmp) method developed in our group for detection. Nonfluorescent, ionic nanocrystals (NCs) of CdSe were conjugated to detection probes and immobilized onto the array surface via ligation with the target small RNA, miR21, which bound to the capture probe complimentarily. Each binding event induced by one target miR21 molecule was then amplified by the release of thousands of Cd2+ from one NC. The free Cd2+ immediately turned on the fluorescence of thousands of fluorogenic Rhod-5N molecules. With such a powerful signal amplification strategy, our assay achieved a limit of detection (LOD) of 35 fM and signals were detectable with analyte concentrations spanning over 7 orders of magnitude. We also identified the differential expression of miR21 in total RNA extracts from healthy breast tissue and diseased cells. Furthermore, our detection scheme demonstrated good specificity in small RNA detection, because significant signal intensity could be observed from small RNAs with one or two nucleotides difference in sequences. Thus, our assay has great application potential for disease diagnosis relying on miRNA biomarkers, or in small RNA expression profiling for new target discovery and functional study.

Fluorescent silica nanoparticles for cancer imaging

In recent years, fluorescent silica nanoparticles (FSNPs) received immense interest in cancer imaging. FSNPs are a new class of engineered optical probes consisting of silica NPs loaded with fluorescent dye molecules. These probes exhibit some attractive features, such as photostability and brightness, which allow sensitive imaging of cancer cells. In general, FSNPs are chemically synthesized in solution using appropriate silane-based precursors. Fluorescent dye molecules are entrapped during the synthesis process. The synthetic process involves hydrolysis and condensation reactions of silane precursors. Stöber's sol-gel and water-in-oil (W/O) microemulsion methods are two popular chemical methods that have been used for synthesizing FSNPs. Silica matrix is capable of carrying hundreds of fluorescent dye molecules in each FSNP, resulting in bright fluorescence. In FSNPs, fluorescent molecules are somewhat protected by the surrounding silica layer, resulting in good photostability. For cancer cell imaging, surface modification of FSNPs is often necessary to obtain appropriate surface functional groups to improve NP aqueous dispersibility as well as bioconjugation capability. Using conventional bioconjugate chemistry, cancer cell-specific biomolecules are then attached to the surface-modified FSNPs. For targeting cancer cells, the FSNPs are often conjugated to specific biomolecules such as antibodies, aptamers, and folic acid. In this chapter, different approaches for the FSNP design will be discussed and some representative protocols for FSNP synthesis will be provided. We will also discuss FSNP surface modification and bioconjugation techniques that are useful for cancer cell imaging.

Aptamer-functionalized nano-biosensors

Nanomaterials have become one of the most interesting sensing materials because of their unique size- and shape-dependent optical properties, high surface energy and surface-to-volume ratio, and tunable surface properties. Aptamers are oligonucleotides that can bind their target ligands with high affinity. The use of nanomaterials that are bioconjugated with aptamers for selective and sensitive detection of analytes such as small molecules, metal ions, proteins, and cells has been demonstrated. This review focuses on recent progress in the development of biosensors by integrating functional aptamers with different types of nanomaterials, including quantum dots, magnetic nanoparticles (NPs), metallic NPs, and carbon nanotubes. Colorimetry, fluorescence, electrochemistry, surface plasmon resonance, surface-enhanced Raman scattering, and magnetic resonance imaging are common detection modes for a broad range of analytes with high sensitivity and selectivity when using aptamer bioconjugated nanomaterials (Apt-NMs). We highlight the important roles that the size and concentration of nanomaterials, the secondary structure and density of aptamers, and the multivalent interactions play in determining the specificity and sensitivity of the nanosensors towards analytes. Advantages and disadvantages of the Apt-NMs for bioapplications are focused.

Emission properties of quantum dots in polymer optical fibres

CdSe/ZnS core-shell quantum dots have been embedded within microstructured polymer optical fibres. The emission properties of quantum dots within fibres have been explored to show that variation in concentration, sample length and pumping regimes effects the emission characteristics of these quantum dots.

Nucleic acid conjugated nanomaterials for enhanced molecular recognition

Nucleic acids, whether designed or selected in vitro, play important roles in biosensing, medical diagnostics, and therapy. Specifically, the conjugation of functional nucleic acid based probe molecules and nanomaterials has resulted in an unprecedented improvement in the field of molecular recognition. With their unique physical and chemical properties, nanomaterials facilitate the sensing process and amplify the signal of recognition events. Thus, the coupling of nucleic acids with various nanomaterials opens up a promising future for molecular recognition. The literature offers a broad spectrum of recent advances in biosensing by employing different nanoplatforms with designed nucleic acids, especially gold nanoparticles, carbon nanotubes, silica nanoparticles, and quantum dots. The advantages of these novel combinations are discussed from the perspective of molecular recognition in chemistry, biology, and medicine, along with the problems confronting future applications.

In vitro interactions between splenocytes and dansylamide dye-embedded nanoparticles detected by flow cytometry

Engineered nanoparticles (NPs) possess a range of biological activity. In vitro methods for assessing toxicity and efficacy would be enhanced by simultaneous quantitative information on the behavior of NPs in culture systems and signals of cell response. We have developed a method for visualizing NPs within cells using standard flow-cytometric techniques and uniquely designed spherical siloxane NPs with an embedded (covalently bound) dansylamide dye. This method allowed NP visualization without obscuring detection of relevant biomarkers of cell subtype, activation state, and other events relevant to assessing bioactivity. We determined that NPs penetrated cells and induced a range of biological signals consistent with activation and costimulation. These results indicate that NPs may affect cell function at concentrations below those inducing cytotoxicity or apoptosis and demonstrate a novel method to image both localization of NPs and cell-level effects.

FROM THE CLINICAL EDITOR

A method for visualizing NPs within cells using standard flow-cytometric techniques is reported in this paper. The novel method allowed NP visualization without obscuring detection of relevant biomarkers of cell subtype, activation state, and other events relevant to assessing bioactivity. NPs also induced a range of biological signals consistent with activation and costimulation.

Nano-flares for mRNA regulation and detection

We build off the previously described concept of a nanoflare to develop an oligonucleotide gold nanoparticle conjugate that is capable of both detecting and regulating intracellular levels of mRNA. We characterize the binding rate and specificity of these materials using survivin, a gene associated with the diagnosis and treatment of cancer, as a target. The nanoconjugate enters cells and binds mRNA, thereby decreasing the relative abundance of mRNA in a dose- and sequence-dependent manner, resulting in a fluorescent response. This represents the first demonstration of a single material capable of both mRNA regulation and detection. Further, we investigate the intracellular biochemistry of the nanoconjugate, elucidating its mechanism of gene regulation. This work is important to the study of biologically active nanomaterials such as the nanoflare and is a first step toward the development of an mRNA responsive "theranostic".

Nanoparticle strategies for enhancing the sensitivity of fluorescence-based biochips

This article describes strategies for achieving fluorescence enhancement in optical biochips. Two strategies are discussed: plasmonic enhancement, which is due to the localized surface plasmon resonance of metal nanostructures that are adjacent to the fluorescent labels in optical immunoassays; and the use of high-brightness silica nanoparticles as enhanced labels. We present a review of the state-of-the-art in both areas, including synthesis techniques for the metal and silica nanoparticles and the use of the nanoparticles in optical immunoassays. Data are presented that highlight the key design parameters which influence the level of enhancement and model assay data are presented that illustrate potential enhancements in assay performance.

Quantum dots as new-generation fluorochromes for FISH: an appraisal

In the field of nanotechnology, quantum dots (QDs) are a novel class of inorganic fluorochromes composed of nanometre-scale crystals made of a semiconductor material. Given the remarkable optical properties that they possess, they have been proposed as an ideal material for use in fluorescent in-situ hybridization (FISH). That is, they are resistant to photobleaching and they excite at a wide range of wavelengths but emit light in a very narrow band that can be controlled by particle size and thus have the potential for multiplexing experiments. The principal aim of this study was to compare the potential of QDs against traditional organic fluorochromes in both indirect (i.e. QD-conjugated streptavidin) and direct (i.e. synthesis of QD-labelled FISH probes) detection methods. In general, the indirect experiments met with a degree of success, with FISH applications demonstrated for chromosome painting, BAC mapping and use of oligonucleotide probes on human and avian chromosomes/nuclei. Many of the reported properties of QDs (e.g. brightness, 'blinking' and resistance to photobleaching) were observed. On the other hand, signals were more frequently observed where the chromatin was less condensed (e.g. around the periphery of the chromosome or in the interphase nucleus) and significant bleed-through to other filters was apparent (despite the reported narrow emission spectra). Most importantly, experimental success was intermittent (sometimes even in identical, parallel experiments) making attempts to improve reliability difficult. Experimentation with direct labelling showed evidence of the generation of QD-DNA constructs but no successful FISH experiments. We conclude that QDs are not, in their current form, suitable materials for FISH because of the lack of reproducibility of the experiments; we speculate why this might be the case and look forward to the possibility of nanotechnology forming the basis of future molecular cytogenetic applications.

Nanomaterials in fluorescence-based biosensing

Fluorescence-based detection is the most common method utilized in biosensing because of its high sensitivity, simplicity, and diversity. In the era of nanotechnology, nanomaterials are starting to replace traditional organic dyes as detection labels because they offer superior optical properties, such as brighter fluorescence, wider selections of excitation and emission wavelengths, higher photostability, etc. Their size- or shape-controllable optical characteristics also facilitate the selection of diverse probes for higher assay throughput. Furthermore, the nanostructure can provide a solid support for sensing assays with multiple probe molecules attached to each nanostructure, simplifying assay design and increasing the labeling ratio for higher sensitivity. The current review summarizes the applications of nanomaterials--including quantum dots, metal nanoparticles, and silica nanoparticles--in biosensing using detection techniques such as fluorescence, fluorescence resonance energy transfer (FRET), fluorescence lifetime measurement, and multiphoton microscopy. The advantages nanomaterials bring to the field of biosensing are discussed. The review also points out the importance of analytical separations in the preparation of nanomaterials with fine optical and physical properties for biosensing. In conclusion, nanotechnology provides a great opportunity to analytical chemists to develop better sensing strategies, but also relies on modern analytical techniques to pave its way to practical applications.

Quantum dots and nanoparticles for photodynamic and radiation therapies of cancer

Semiconductor quantum dots and nanoparticles composed of metals, lipids or polymers have emerged with promising applications for early detection and therapy of cancer. Quantum dots with unique optical properties are commonly composed of cadmium contained semiconductors. Cadmium is potentially hazardous, and toxicity of such quantum dots to living cells, and humans, is not yet systematically investigated. Therefore, search for less toxic materials with similar targeting and optical properties is of further interest. Whereas, the investigation of luminescence nanoparticles as light sources for cancer therapy is very interesting. Despite advances in neurosurgery and radiotherapy the prognosis for patients with malignant gliomas has changed little for the last decades. Cancer treatment requires high accuracy in delivering ionizing radiation to reduce toxicity to surrounding tissues. Recently some research has been focused in developing photosensitizing quantum dots for production of radicals upon absorption of visible light. In spite of the fact that visible light is safe, this approach is suitable to treat only superficial tumours. Ionizing radiation (X-rays and gamma rays) penetrate much deeper thus offering a big advantage in treating patients with tumours in internal organs. Such concept of using quantum dots and nanoparticles to yield electrons and radicals in photodynamic and radiation therapies as well their combination is reviewed in this article.

Calcium phosphate nanocomposite particles for in vitro imaging and encapsulated chemotherapeutic drug delivery to cancer cells

Paradigm-shifting modalities to more efficiently deliver drugs to cancerous lesions require the following attributes: nanoscale-size, targetability, and stability under physiological conditions. Often, these nanoscale drug delivery vehicles are limited due to agglomeration, poor solubility, or cytotoxicity. Thus, we have designed a methodology to encapsulate hydrophobic antineoplastic chemotherapeutics within a 20-30 nm diameter, pH-responsive, nonagglomerating, nontoxic calcium phosphate nanoparticle matrix. In the present study, we report on calcium phosphate nanocomposite particles (CPNPs) that encapsulate both fluorophores and chemotherapeutics, are colloidally stable in physiological solution for an extended time at 37 degrees C and can efficaciously deliver hydrophobic antineoplastic agents, such as ceramide, in several cell model systems.

Encapsulation of organic molecules in calcium phosphate nanocomposite particles for intracellular imaging and drug delivery

Encapsulation of imaging agents and drugs in calcium phosphate nanoparticles (CPNPs) has potential as a nontoxic, bioresorbable vehicle for drug delivery to cells and tumors. The objectives of this study were to develop a calcium phosphate nanoparticle encapsulation system for organic dyes and therapeutic drugs so that advanced fluoresence methods could be used to assess the efficiency of drug delivery and possible mechanisms of nanoparticle bioabsorption. Highly concentrated CPNPs encapsulating a variety of organic fluorophores were successfully synthesized. Well-dispersed CPNPs encapsulating Cy3 amidite exhibited nearly a 5-fold increase in fluorescence quantum yield when compared to the free dye in PBS. FCS diffusion data and cell staining were used to show pH-dependent dissolution of the particles and cellular uptake, respectively. Furthermore, an experimental hydrophobic cell growth inhibitor, ceramide, was successfully delivered in vitro to human vascular smooth muscle cells via encapsulation in CPNPs. These studies demonstrate that CPNPs are effective carriers of dyes and drugs for bioimaging and, potentially, for therapeutic intervention.

Experimental and theoretical studies of the optimisation of fluorescence from near-infrared dye-doped silica nanoparticles

There is substantial interest in the development of near-infrared dye-doped nanoparticles (NPs) for a range of applications including immunocytochemistry, immunosorbent assays, flow cytometry, and DNA/protein microarray analysis. The main motivation for this work is the significant increase in NP fluorescence that may be obtained compared with a single dye label, for example Cy5. Dye-doped NPs were synthesised and a reduction in fluorescence as a function of dye concentration was correlated with the occurrence of homo-Förster resonance energy transfer (HFRET) in the NP. Using standard analytical expressions describing HFRET, we modelled the fluorescence of NPs as a function of dye loading. The results confirmed the occurrence of HFRET which arises from the small Stokes shift of near-infrared dyes and provided a simple method for predicting the optimum dye loading in NPs for maximum fluorescence. We used the inverse micelle method to prepare monodispersed silica NPs. The NPs were characterised using dynamic light scattering, UV spectroscopy, and transmission electron microscopy (TEM). The quantum efficiency of the dye inside the NPs, as a function of dye loading, was also determined. The fluorescent NPs were measured to be approximately 165 times brighter than the free dye, at an optimal loading of 2% (w/w). These experimental results were in good agreement with model predictions.

Clearance properties of nano-sized particles and molecules as imaging agents: considerations and caveats

Nanoparticles possess enormous potential as diagnostic imaging agents and hold promise for the development of multimodality agents with both imaging and therapeutic capabilities. Yet, some of the most promising nanoparticles demonstrate prolonged tissue retention and contain heavy metals. This presents serious concerns for toxicity. The creation of nanoparticles with optimal clearance characteristics will minimize toxicity risks by reducing the duration of exposure to these agents. Given that many nanoparticles possess easily modifiable surface and interior chemistry, if nanoparticle characteristics associated with optimal clearance from the body were well established, it would be feasible to design and create agents with more favorable clearance properties. This article presents a thorough discussion of the physiologic aspects of nanoparticle clearance, focusing on renal mechanisms, and provides an overview of current research investigating clearance of specific types of nanoparticles and nano-sized macromolecules, including dendrimers, quantum dots, liposomes and carbon, gold and silica-based nanoparticles.

Silica-based multimodal/multifunctional nanoparticles for bioimaging and biosensing applications

In the last decade, the field of nanoparticle (NP) technology has attracted immense interest in bioimaging and biosensing research. This technology has demonstrated its capability in obtaining sensitive data in a noninvasive manner, promising a breakthrough in early-stage cancer diagnosis, stem cell tracking, drug delivery, pathogen detection and gene delivery in the near future. However, successful and wide application of this technology relies greatly on robust NP engineering and synthesis methodologies. The NP development steps involve design, synthesis, surface modification and bioconjugation. Each of these steps is critical in determining the overall performance of NPs. It is desirable to obtain NPs that are highly sensitive, stable, imageable, biocompatible and targetable. It is also desirable to obtain multimodal/multifunctional NPs that will enable imaging/sensing of the target using multiple imaging/sensing modalities. In this review, we focus on silica NPs that have been developed for biosensing applications and silica-based multimodal/multifunctional NPs for bioimaging applications.

Multifunctional Particles: Magnetic Nanocrystals and Gold Nanorods Coated with Fluorescent Dye-Doped Silica Shells

Multifunctional colloidal core-shell nanoparticles of magnetic nanocrystals (of iron oxide or FePt) or gold nanorods encapsulated in silica shells doped with the fluorescent dye, Tris(2,2'-bipyridyl)dichlororuthenium(II) hexahydrate (Rubpy) were synthesized. The as-prepared magnetic nanocrystals are initially hydrophobic and were coated with silica using a microemulsion approach, while the as-prepared gold nanorods are hydrophilic and were coated with silica using a Stöber-type of process. Each approach yielded monodisperse nanoparticles with uniform fluorescent dye-doped silica shells. These colloidal heterostructures have the potential to be used as dual-purpose tags-exhibiting a fluorescent signal that could be combined with either dark-field optical contrast (in the case of the gold nanorods), or enhanced contrast in magnetic resonance images (in the case of magnetic nanocrystal cores). The optical and magnetic properties of the fluorescent silica-coated gold nanorods and magnetic nanocrystals are reported.

Iridium-complex-functionalized Fe3O4/SiO2 core/shell nanoparticles: a facile three-in-one system in magnetic resonance imaging, luminescence imaging, and photodynamic therapy

Highly uniform Fe3O4/SiO2 core/shell nanoparticles functionalized by phosphorescent iridium complexes (Ir) have been strategically designed and synthesized. The Fe3O4/SiO2(Ir) nanocomposite demonstrates its versatility in various applications: the magnetic core provides the capability for magnetic resonance imaging and the great enhancement of the spin-orbit coupling in the iridium complex makes it well suited for phosphorescent labeling and simultaneous singlet oxygen generation to induce apoptosis.

Bioconjugated nanoparticle detection of respiratory syncytial virus infection

The integration of nanotechnology with biology has produced major advances in molecular diagnostics, therapeutics, and bioengineering. Recent advances have led to the development of functionalized nanoparticles (NPs) that are covalently linked to biological molecules such as antibodies, peptides, proteins, and nucleic acids. These functionalized NPs allow for development of novel diagnostic tools and methods, particularly for pathogens, as rapid and sensitive diagnostics are essential for defining the emergence of infection, determining the period that preventive measures should be applied, for evaluating drug and vaccine efficacy, and for controlling epidemics. In this study, we show that functionalized NPs conjugated to monoclonal antibodies can be used to rapidly and specifically detect respiratory syncytial virus in vitro and in vivo. These results suggest that functionalized NPs can provide direct, rapid, and sensitive detection of viruses and thereby bridge the gap between current cumbersome virus detection assays and the burgeoning need for more rapid and sensitive detection of viral agents.

Optically switchable nanoparticles for biological imaging

Optical imaging in live cells has provided a wealth of information regarding the various biological mechanisms, including using genetically coded green-fluorescent protein-conjugated organic dye molecules and, more recently, highly luminescent quantum dots as optical tags for the target biomolecules. Cells are inherently complex, grow constantly and have autofluorescence covering the entire visible spectrum ranging from green to red. At the single quantum-emitter level, it is often difficult to distinguish optical probes from fortuitous fluorophores inside living cells owing to complexity and constant evolvement. We have developed photoswitchable nanoparticles–optical nanoprobes that can be highlighted in either red or green during fluorescence imaging. Such optically addressable nanoprobes offer unambiguous detection of sites of biological interactions, and successfully implementing such optically switchable nanoprobes should greatly reduce the occurence of false-positives in biomedical imaging and unambiguous detections.

Quantum Dots as Reporters in Multiplexed Immunoassays for Biomarkers of Exposure to Agrochemicals

The application of quantum dots (QDs) as labels in immunoassay microarrays for the multiplex detection of 3-phenoxybenzoic acid (PBA) and atrazine-mercapturate (AM) has been demonstrated. PBA and AM are biomarkers of exposure to the pyrethroid insecticides and to the herbicide atrazine, respectively. Microarrays were fabricated by microcontact printing of the coating antigens in line patterns onto glass substrates. Competitive immunoassays were successfully performed using QDs (QD560 and QD620) as reporters. The multiplexed immunoassays were characterized by fluorescence microscopy and SEM. The application of QD fluorophores facilitates multiplex assays and therefore can contribute to enhanced throughput in biomonitoring.