Recent developments in dispersive liquid–liquid microextraction

Ionic liquid-based water treatment technologies for organic pollutants: Current status and future prospects of ionic liquid mediated technologies

Water scarcity motivated the scientific researcher to develop efficient technologies for the wastewater treatment for its reuse. Ionic liquids have been applied to many industrial and analytical separation processes, but their applications in the wastewater treatment, especially in the removal of organic pollutants, are still not well explored. Potential applications of ionic liquids include solvent extraction, solvent membrane technologies and ionic liquid-modified materials that are mainly used as adsorbents. Aforementioned technologies have been examined for the abatement of phenol, chloro- and nitrophenols, toluene, bisphenol A, phthalates, pesticides, dyes, and pharmaceuticals etc. Present review enlightens the application of different ionic liquids in wastewater treatment and suggests the versatility of ionic liquids in the development of rapid, effective and selective removal processes for the variety of organic pollutants. Implementation of ionic liquid based technologies for wastewater treatment have lots of challenges including the selection of non-hazardous ionic liquids, technological applications, high testing requirements for individual uses and scaling-up of the entire pollutant removal, disposal, and ionic liquid regeneration process. Toxicity assessment of water soluble ionic liquids (ILs) is the major issue due to the widespread application of ILs and hence more exposure of environment by ILs. The development of effective technologies for the recovery/treatment of wastewater contaminated with ILs is necessary from the environmental point of view. Furthermore, the cost factor is the major challenge associated with ionic liquid-based technologies.

Determination of Selected Pyrrolizidine Alkaloids in Honey by Dispersive Liquid-Liquid Microextraction and Ultrahigh-Performance Liquid Chromatography-Tandem Mass Spectrometry

The contamination of honey with hepatotoxic pyrrolizidine alkaloids (PAs) is an actual concern for food safety. This study reports the first application of dispersive liquid-liquid microextraction (DLLME) in the determination of five relevant PAs, and the relative N-oxide derivatives (PANOs), in honey. The effects of different experimental parameters (pH, ionic strength, type and volume of DLLME solvents) affecting the extraction efficiency were carefully investigated and optimized. PAs were extracted from honey (diluted solution 10% w/v at pH 9.5) by injecting a mixture of chloroform and isopropyl alcohol. A reduction step (zinc powder in acidic aqueous solution) before DLLME was performed to convert PANOs in PAs and to obtain the total PA levels. Both sample preparation protocols (DLLME and Zn-DLLME) showed negligible matrix effects on PA signal intensity in honeys of different botanical origins. The overall recoveries of DLLME and Zn-DLLME ranged from 71 to 102% and from 63 to 103%, respectively, with a good precision (standard deviations in the range from 1 to 12%). The attained method quantification limits stayed between 0.03 and 0.06 μg kg^-1, and the linear response range extended to 25 μg kg^-1. Additionally, the proposed method provides results comparable to those of the SPE protocol in the analysis of real samples. An analysis of retail honeys revealed PA residues in all analyzed samples, with a maximum level of 17.5 μg kg^-1 (total PAs). Globally, the proposed method provides a sensitive and accurate determination of analytes and offers numerous advantages, such as simplicity, low cost, and a high sample throughput, which make it suitable for screening and quality control programs in food chain and occurrence studies.

Ionic Liquid-Based Liquid-Liquid Microextraction for Benzodiazepine Analysis in Postmortem Blood Samples

Sample preparation is rapidly improving to fulfill the need for faster and more environmentally friendly alternatives. In this respect, ionic liquid-based dispersive liquid-liquid microextraction (IL-DLLME) is an interesting technique. However, it has not yet been evaluated for the analysis of postmortem samples, which are frequently analyzed in forensic toxicology. This study investigates the applicability of IL-DLLME coupled to liquid chromatography-tandem mass spectrometry (LC-MS/MS), for the analysis of benzodiazepines in postmortem blood of 11 forensic cases. The method was compared with a validated solid-phase extraction (SPE) method. Bland-Altman analysis was performed on 24 benzodiazepine measurements. Both methods gave comparable results, except for flurazepam and temazepam (>55% difference). A feasible explanation is high postmortem matrix variability that was not considered during IL-DLLME validation experiments. Another issue could be the use of a single nondeuterated SPE internal standard. Overall, IL-DLLME has proven its usability for the analysis of postmortem blood.

Solvent-terminated dispersive liquid-liquid microextraction: a tutorial

Solvent-terminated dispersive liquid-liquid microextraction (ST-DLLME) is a special mode of DLLME in which a demulsifying solvent is injected into the cloudy mixture of sample/extractant to break the emulsion and induce phase separation. The demulsification process starts by flocculation of the dispersed microdroplets by Ostwald ripening or coalescence to form larger droplets. Then, the extractant either floats or sinks depending on its density as compared with that for the aqueous sample. The demulsifier should have high surface activity and low surface tension in order to be capable of inducing phase separation. The extraction efficiency in ST-DLLME is controlled by the same experimental variables of normal DLLME (n-DLLME) such as the type and volume of the extractant as well as the disperser. Other parameters such as pH and the temperature of the sample, the stirring rate, the time of extraction and the addition of salt are also important to consider. Along with these factors, the demulsifier type and volume and the demulsification time have to be optimized. By using solvents to terminate the dispersion step in DLLME, the centrifugation process is not necessary. This in turn improves precision, increases throughput, decreases the risk of contamination through human intervention and minimizes the overall analysis time. ST-DLLME has been successfully applied for determination of both inorganic and organic analytes including pesticides and pharmaceuticals in water and biological fluids. Demulsification via solvent injection rather than centrifugation saves energy and makes ST-DLLME easier to automate. These characteristics in addition to the low solvent consumption, the reduced organic waste and the possibility of using water in demulsification bestow green features on ST-DLLME. This tutorial discusses the principle, the practical aspects and the different applications of ST-DLLME.

A fast and simple air-assisted liquid-liquid microextraction procedure for the simultaneous determination of bisphenols, parabens, benzophenones, triclosan, and triclocarban in human urine by liquid chromatography-tandem mass spectrometry

The increasing awareness and public concern with hazard exposure to endocrine-disrupting chemicals calls for methods capable to handle numerous samples in short analysis time. In this present study, a novel method combining air-assisted liquid-liquid microextraction and liquid chromatography coupled to mass spectrometry was developed and validated for the extraction, preconcentration, and determination of 7 bisphenols (bisphenol A, bisphenol S, bisphenol AP, bisphenol P, bisphenol F, bisphenol AF, bisphenol Z), 7 parabens (methyl-, ethyl-, propyl-, butyl-, benzyl-paraben, methyl-protocatechuic acid, and ethyl-protocatechuic acid), 5 benzophenones (benzophenone-1, benzophenone-2, benzophenone-3, benzophenone-8, and 4-hydroxybenzophenone), and two antimicrobials (triclosan and triclocarban) in human urine samples. Type and volume of solvent, extraction time (cycles), pH sample, ionic strength, agitation, and needle dimensions were evaluated. The matrix-matched calibration curves of all analytes were linear with correlation coefficients higher than 0.99 in the range level of 1.0-20.0 ng mL^-1. The relative standard deviation, precision, at three concentrations (1.0, 10.0 and 20.0 ng mL^-1) was lower than 15% with accuracy ranging from 90% to 114%. The biomonitoring capability of the new proposed method was confirmed with the analysis of 50 human urine samples randomly collected from Brazilian children. High urinary concentrations of several EDCs associated with usage of personal care products were found.

Novel generation of nano-structured supramolecular solvents based on an ionic liquid as a green solvent for microextraction of some synthetic food dyes

A new, fast, and environmentally friendly supra molecular solvent was introduced for extraction of three synthetic food dyes in foodstuff samples.

Sample preparation for polar metabolites in bioanalysis

Sample preparation is a primary step of any bioanalytical workflow, especially in metabolomics where maximum information has to be obtained without spoiling the analytical instrument. The sample extraction of polar metabolites is still challenging but strategies exist to enable the phase transfer of hydrophilic metabolites from the biological phase to a clean interference-free phase.

Fast and easy extraction of antidepressants from whole blood using ionic liquids as extraction solvent

This study aims to prove that ionic liquids (ILs) can be used as extraction solvents in a liquid-liquid microextraction, coupled to LC-MS/MS, for the quantification of a large group of antidepressants in whole blood samples. The sample preparation procedure consisted of adding 1.0mL aqueous buffer pH 3.0 and 60µL of IL (1-butyl-3-methylimidazolium hexafluorophosphate) to 1.0mL whole blood. Subsequently, a 5-min rotary mixing step was performed followed by centrifugation. The lower IL phase was collected, diluted 1:10 in methanol and 10µL was injected into the LC-MS/MS. The following analytes were included in the full-quantitative method: agomelatine, amitriptyline, bupropion, clomipramine, dosulepin, doxepin, duloxetine, escitalopram, fluoxetine, imipramine, maprotiline, mianserin, mirtazapine, nortriptyline, paroxetine, reboxetine, trazodone and venlafaxine. Selectivity was checked for 10 different whole blood matrices. Additionally, possible interferences of deuterated standards or other antidepressants were evaluated. Overall, no interferences were found. For each analyte a matrix-matched calibration curve was constructed (7 levels, n = 6), covering therapeutic and low toxic concentrations. Accuracy and precision were evaluated over eight days, at three concentration levels (n = 2). Bias, repeatability and intermediate precision results met with the proposed validation criteria, except for fluvoxamine, which was therefore only included in the semi-quantitative method. LOQs were set at the lowest calibrator concentration and LOD values were - for most analytes - within a range of 1-2ng/mL. Recoveries (RE) and matrix effects (ME) were evaluated for five types of donor whole blood, at two concentration levels. RE values were within a range of 53.11-132.98%. ME values were within a range of 61.92-123.24%. In conclusion, this study proves the applicability of ILs as extraction solvents for a large group of antidepressants in complex whole blood matrices.

Highly sensitive determination of copper (II) ions using fluorescence and chemiluminescence emissions of modified CdS quantum dots after it’s preconcentration by dispersive liquid–liquid microextraction

Two highly sensitive and selective methods based on fluorescence (FL) and chemiluminescence (CL) emissions of 8-mercaptoquinoline-capped CdS quantum dots (MCQ-CdS QDs) were described for the determination of copper (II) after it’s preconcentration. High fluorescent CdS QDs, synthesized in an aqueous medium, generated a relatively intense CL emission in the presence of potassium permanganate as an oxidant. Furthermore, low quantities of copper (II) ions showed a remarkable quenching effect on both of the CL and FL emissions of MCQ-CdS QDs. Based on this effect, two selective and simple methods were established for Cu2+, and the detection limits of 0.28 and 0.026 ng mL−1 were obtained for the FL and CL methods, respectively. Also, due to the high propensity of MCQ to Cu2+, good selectivity was obtained and no sensible interfering effects from other metal ions were observed. To more sensitize the developed method, an efficient preconcentration process was designed based on the high-yield ultrasound-assisted temperature-controlled ionic liquid dispersive liquid–liquid microextraction (UA-TIL-DLLME) method. Under the optimum conditions, the extracted Cu2+ showed a suppressing effect on the FL and CL emissions of CdS QDs proportional to its initial concentration over the ranges of 0.008–1.4 and 0.001–1.4 ng mL−1, respectively. The limits of detection of 3.7 and 0.37 pg mL−1, respectively, were also achieved. The established methods showed great features and were satisfactorily applied to the monitoring of ultratrace Cu2+ in some different environmental samples.

Online coupling of fully automatic in-syringe dispersive liquid-liquid microextraction with oxidative back-extraction to inductively coupled plasma spectrometry for sample clean-up in elemental analysis: A proof of concept

A proof of concept of a novel automatic sample cleanup approach for metal assays in troublesome matrixes as a front-end sample pre-treatment to inductively coupled plasma optical emission spectroscopy - ICP-OES - is herein presented. Target metals, namely, copper, lead, and cadmium were complexed in-system quantitatively using ammonium pyrrolidine dithiocarbamate (APDC) and transferred into a minute volume of toluene as extractant employing lab-in-syringe magnetic stirring-assisted dispersive liquid-liquid microextraction (LIS-MSA-DLLME). After discharge of the sample, the analytes were back-extracted into nitric acid and injected on-line into ICP-OES. To promote and expedite this process in-syringe, advantage was taken from oxidative decomposition of the chelate by potassium iodate, reported in this article for the first time. Experimental conditions for LIS-MSA-DLLME were optimized by Box-Benkhen multivariate analysis using the geometric mean of analyte recoveries as the desirability function. Times of extraction and back-extraction of 300s and 100s, respectively, pH 5.5 at 30mmol/L acetate, 300µL of extraction solvent, and 600µmol/L of APDC were finally applied. Online interfacing to ICP-OES for back-extract analysis yielded average repeatabilities for Cd, Cu, and Pb of 2.9%, 3.5%, and 3.5% with limits of detections (3s) of 1.9, 1.4, and 5.6ng/mL, respectively. Oxidative back-extraction was proven reliable for the determination of metal species in coastal seawater, surrogate digestive fluids and soil leachates with recovery values for Cd, Cu, and Pb ranging from 90% to 118%, 68% to 104%, and 86% to 112%, respectively.

Sensitive determination of cholesterol and its metabolic steroid hormones by UHPLC-MS/MS via derivatization coupled with dual ultrasonic-assisted dispersive liquid-liquid microextraction

RATIONALE

Quantitative analysis of cholesterol and its metabolic steroid hormones plays a vital role in diagnosing endocrine disorders and understanding disease progression, as well as in clinical medicine studies. Because of their extremely low abundance in body fluids, it remains a challenging task to develop a sensitive detection method.

METHODS

A hyphenated technique of dual ultrasonic-assisted dispersive liquid-liquid microextraction (dual-UADLLME) coupled with microwave-assisted derivatization (MAD) was proposed for cleansing, enrichment and sensitivity enhancement. 4'-Carboxy-substituted rosamine (CSR) was synthesized and used as derivatization reagent. An ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) method was developed for determination of cholesterol and its metabolic steroid hormones in the multiple reaction monitoring mode.

RESULTS

Parameters of dual-UADLLME, MAD and UHPLC-MS/MS were all optimized. Satisfactory linearity, recovery, repeatability, accuracy and precision, absence of matrix effect and extremely low limits of detection (LODs, 0.08-0.15 pg mL(-1) ) were achieved.

CONCLUSIONS

Through the combination of dual-UADLLME and MAD, a determination method for cholesterol and its metabolic steroid hormones in human plasma, serum and urine samples was developed and validated with high sensitivity, selectivity, accuracy and perfect matrix effect results. Copyright © 2016 John Wiley & Sons, Ltd.