Electrochemical sensors and biosensors based on the use of polyaniline and its nanocomposites: a review on recent advances

Laccase and Tyrosinase Biosensors Used in the Determination of Hydroxycinnamic Acids

In recent years, researchers have focused on developing simple and efficient methods based on electrochemical biosensors to determine hydroxycinnamic acids from various real samples (wine, beer, propolis, tea, and coffee). Enzymatic biosensors represent a promising, low-cost technology for the direct monitoring of these biologically important compounds, which implies a fast response and simple sample processing procedures. The present review aims at highlighting the structural features of this class of compounds and the importance of hydroxycinnamic acids for the human body, as well as presenting a series of enzymatic biosensors commonly used to quantify these phenolic compounds. Enzyme immobilization techniques on support electrodes are very important for their stability and for obtaining adequate results. The following sections of this review will briefly describe some of the laccase (Lac) and tyrosinase (Tyr) biosensors used for determining the main hydroxycinnamic acids of interest in the food or cosmetics industry. Considering relevant studies in the field, the fact has been noticed that there is a greater number of studies on laccase-based biosensors as compared to those based on tyrosinase for the detection of hydroxycinnamic acids. Significant progress has been made in relation to using the synergy of nanomaterials and nanocomposites for more stable and efficient enzyme immobilization. These nanomaterials are mainly carbon- and/or polymer-based nanostructures and metallic nanoparticles which provide a suitable environment for maintaining the biocatalytic activity of the enzyme and for increasing the rate of electron transport.

Electrochemical DNA Sensor Based on Poly(Azure A) Obtained from the Buffer Saturated with Chloroform

Electropolymerized redox polymers offer broad opportunities in detection of biospecific interactions of DNA. In this work, Azure A was electrochemically polymerized by multiple cycling of the potential in phosphate buffer saturated with chloroform and applied for discrimination of the DNA damage. The influence of organic solvent on electrochemical properties of the coating was quantified and conditions for implementation of DNA in the growing polymer film were assessed using cyclic voltammetry, quartz crystal microbalance, and electrochemical impedance spectroscopy. As shown, both chloroform and DNA affected the morphology of the polymer surface and electropolymerization efficiency. The electrochemical DNA sensor developed made it possible to distinguish native and thermally and chemically damaged DNA by changes in the charge transfer resistance and capacitance.

Recent advances in ZnO nanostructure-based electrochemical sensors and biosensors

Nanostructured metal oxides, such as zinc oxide (ZnO), are considered as excellent materials for the fabrication of highly sensitive and selective electrochemical sensors and biosensors due to their good properties, including a high specific surface area, high catalytic efficiency, strong adsorption ability, high isoelectric point (IEP, 9.5), wide band gap (3.2 eV), biocompatibility and high electron communication features. Thus, ZnO nanostructures are widely used to fabricate efficient electrochemical sensors and biosensors for the detection of various analytes. In this review, we have discussed the synthesis of ZnO nanostructures and the advances in various ZnO nanostructure-based electrochemical sensors and biosensors for medical diagnosis, pharmaceutical analysis, food safety, and environmental pollution monitoring.

A simple and industrially scalable method for making a PANI-modified cellulose touch sensor

In this work we present a simple, inexpensive, and easily scalable industrial paper process to prepare sheets of conductive cellulose fibers coated with polyanilines. First, bare fibers were coated by in situ oxidative polymerization of polyaniline then, the resulting composite fibers were used to fabricate electroactive sheets. The resistivity of the sheets is 14 ± 1 Ω sq^-1, a value around 1000 times lower than those reported in literature. The superior electronic proprieties of the sheets were demonstrated by assembling a capacitive touch sensor device with optimized geometry. The touch sensor shows an increase of 3-4 % of the starting electric capacity after compression and a fast response time of 52 ms. To our knowledge this is the first time that a device is prepared in this way and therefore, the herein presented results can bring an significant improvement in the development of low-cost, green and high-tech electronic devices.

Label-free anti-Müllerian hormone sensor based on polyaniline micellar modified electrode

A label-free electrochemical immunosensor based on polyaniline (PANI) micellar electrode was firstly fabricated for direct AMH detection. To control the size regularity of PANI, a micelle-based method using ammonium peroxydisulfate (APS) as a reducing agent was employed in the polymerization process. The Anti-AMH antibodies were readily immobilized onto PANI via peptide bond to enhance the sensor specificity and sensitivity. This sensor was applied for the detection of AMH, an ovarian response indicator in female related to residual eggs during a woman's monthly cycle. The sensor performances were systematically investigated by differential pulse voltammetry. The anodic peak current decreases with the increase of AMH concentration owing to blocking of electron transfer by AMH. Under the optimal conditions, this sensor offers high sensitivity with a low detection limit of 0.1 ng mL^-1 and a wide linear range of 0.1-4 ng mL^-1, which is sensitive enough to indicate the ability to produce eggs during a woman's monthly cycle. Furthermore, this system requires lower sample volume (5 μL), while offers the simple fabrication with low cost and no synthetic challenge and faster analysis compared with a standard ELISA. Ultimately, this sensor was successfully applied for the detection of AMH in human serum with satisfactory results. Thus, it might be an alternative tool for AMH screening in clinical setting.

In situ microsynthesis of polyaniline: synthesis–structure–conductivity correlation

The multi-analytical study of polyaniline samples obtained by in situ microsynthesis was performed.

Nanocomposites for Electrochemical Sensors and Their Applications on the Detection of Trace Metals in Environmental Water Samples

The elevated concentrations of various trace metals beyond existing guideline recommendations in water bodies have promoted research on the development of various electrochemical nanosensors for the trace metals' early detection. Inspired by the exciting physical and chemical properties of nanomaterials, advanced functional nanocomposites with improved sensitivity, sensitivity and stability, amongst other performance parameters, have been synthesized, characterized, and applied on the detection of various trace metals in water matrices. Nanocomposites have been perceived as a solution to address a critical challenge of distinct nanomaterials that are limited by agglomerations, structure stacking leading to aggregations, low conductivity, and limited porous structure for electrolyte access, amongst others. In the past few years, much effort has been dedicated to the development of various nanocomposites such as; electrochemical nanosensors for the detection of trace metals in water matrices. Herein, the recent progress on the development of nanocomposites classified according to their structure as carbon nanocomposites, metallic nanocomposites, and metal oxide/hydroxide nanocomposites is summarized, alongside their application as electrochemical nanosensors for trace metals detection in water matrices. Some perspectives on the development of smart electrochemical nanosensors are also introduced.

Tramadol sensing in non-invasive biological fluids using a voltammetric electronic tongue and an electrochemical sensor based on biomimetic recognition

Tramadol (TRA) is a weak opioid analgesic, prescribed to relieve mild to moderately severe pain. However, side effects of TRA overdoses, including vomiting, depression, tachycardia, convulsions, morbidity and mortality are often reported. In this study, an electrochemical sensor based on molecularly imprinted conductive polymer was firstly developed for the quantitative and non-invasive detection of TRA. Secondly, a voltammetric electronic tongue (VE-Tongue) combined with chemometric methods was used for the qualitative analysis. The MIP sensor was constructed by self-assembling a poly-aniline layer coated with silver nanoparticles (PANI-AgNPs) on a screen-printed gold electrode (Au-SPE). Then, 2-amino-thiophenol was polymerised in the presence of TRA. The electronic device exhibits, under optimal conditions, responses proportional to TRA concentrations (0.01-100 µg/mL) with detection and quantification limits of 9.42 µg/mL and 28.55 µg/mL, respectively. Moreover, its selectivity was proven by insignificant interferences of substances (paracetamol and citric acid). Spiked saliva and urine samples were used for the sensor practical application with a significant recovery above 90% and standard deviations below 4.5%. Besides, urine samples' analyses using VE-Tongue and pattern recognition methods show good discrimination, classification, and prediction results with scores above 95%. Correspondingly, both electro-analytical devices could be viable for monitoring drugs in biological matrices.

Tailoring Intrinsic Properties of Polyaniline by Functionalization with Phosphonic Groups

Phosphonated polyanilines were synthesized by copolymerization of aniline (ANI) with both 2- and 4-aminophenylphosphonic acids (APPA). The material composition and the final properties of the copolymers can be easily tailored by controlling the monomers ANI/APPA molar feed ratio. An important influence on the reactivity of monomers has been found with the substituent position in the ring, leading to differences in the properties and size of blocks of each monomer in the polymer. As expected, while 2APPA shows more similarities to ANI, 4APPA is much less reactive. Phosphorus loading of ~5 at% was achieved in the poly(aniline-co-2-aminophenylphosphonic acid) (PANI2APPA) with a 50/50 molar feed ratio. All the resulting copolymers were characterized by different techniques. Experimental results and density functional theory (DFT) computational calculations suggest that the presence of phosphonic groups in the polymeric chain gives rise to inter- and intra-chain interactions, as well as important steric effects, which induce a slight twist in the substituted PANI structure. Therefore, the physicochemical, electrical, and electrochemical properties are modified and can be suitably controlled.

Recent Advances of Conducting Polymers and Their Composites for Electrochemical Biosensing Applications

Conducting polymers (CPs) have been at the center of research owing to their metal-like electrochemical properties and polymer-like dispersion nature. CPs and their composites serve as ideal functional materials for diversified biomedical applications like drug delivery, tissue engineering, and diagnostics. There have also been numerous biosensing platforms based on polyaniline (PANI), polypyrrole (PPY), polythiophene (PTP), and their composites. Based on their unique properties and extensive use in biosensing matrices, updated information on novel CPs and their role is appealing. This review focuses on the properties and performance of biosensing matrices based on CPs reported in the last three years. The salient features of CPs like PANI, PPY, PTP, and their composites with nanoparticles, carbon materials, etc. are outlined along with respective examples. A description of mediator conjugated biosensor designs and enzymeless CPs based glucose sensing has also been included. The future research trends with required improvements to improve the analytical performance of CP-biosensing devices have also been addressed.

Recent Advances in Electrochemical Monitoring of Chromium

The extensive use of chromium by several industries conducts to the discharge of an immense quantity of its various forms in the environment which affects drastically the ecological and biological lives especially in the case of hexavalent chromium. Electrochemical sensors and biosensors are useful devices for chromium determination. In the last five years, several sensors based on the modification of electrode surface by different nanomaterials (fluorine tin oxide, titanium dioxide, carbon nanomaterials, metallic nanoparticles and nanocomposite) and biosensors with different biorecognition elements (microbial fuel cell, bacteria, enzyme, DNA) were employed for chromium monitoring. Herein, recent advances related to the use of electrochemical approaches for measurement of trivalent and hexavalent chromium from 2015 to 2020 are reported. A discussion of both chromium species detections and speciation studies is provided.

One-step modification of nano-polyaniline/glucose oxidase on double-side printed flexible electrode for continuous glucose monitoring: Characterization, cytotoxicity evaluation and in vivo experiment

The single-step modification of the nanostructured polyaniline (PANI)/glucose oxidase (GOD) enzyme on double-sided, screen-printed, flexible electrodes doped with Prussian blue (PB), has been achieved and successfully applied in continuous glucose monitoring in vivo, and its biocompatibility has been evaluated systematically. The proposed fabrication procedure is simple, low cost, and suitable for large-scale production. PB doped with carbon ink catalyzes the reduction of hydrogen peroxide (H₂O₂) in low-voltage conditions, which could help eliminate interferences. And the PANI/GOD nanostructure makes the GOD enzyme more stable for long-term, in vivo monitoring. More importantly, a polyurethane (PU) layer is deposited on the electrode's surface as a diffusion limiting membrane that enhanced the linear range and biocompatibility. In tests in vitro, the proposed biosensor achieved a linear range of 0-12 mM and a good sensitivity of 16.66 μA·mM^-1·cm^-2(correlation coefficient R² = 0.9962) with an excellent specificity to glucose. The biosensor exhibits long-term stability, with a maximum lifespan of 14 days when stored in phosphate buffer solution at 4 °C, and achieves a sensitivity of 120%. The biocompatibilities of the electrode materials have also been systematically evaluated in cytotoxicity and cell adhesion tests to ensure the safety of implantation. In experiments in vivo, the biosensor can successfully monitor the glucose level fluctuation of rats after 24 h following implantation. Overall, the biosensor fabricated with the double-side, screen-printing process, satisfies the glucose monitoring range in vivo and eliminates various types of interference, thus establishing a new, large-scale production procedure for flexible in vivo biosensors.

Optical, electrochemical and electrical (nano)biosensors for detection of exosomes: A comprehensive overview

Exosomes are small extracellular vesicles involved in many physiological activities of cells in the human body. Exosomes from cancer cells have great potential to be applied in clinical diagnosis, early cancer detection and target identification for molecular therapy. While this field is gaining increasing interests from both academia and industry, barriers such as supersensitive detection techniques and highly-efficient isolation methods remain. In the clinical settings, there is an urgent need for rapid analysis, reliable detection and point-of-care testing (POCT). With these challenges to be addressed, this article aims to review recent developments and technical breakthroughs including optical, electrochemical and electrical biosensors for exosomes detection in the field of cancer and other diseases and demonstrate how nanobiosensors could enhance the performance of conventional sensors. Working strategies, limit of detections, advantages and shortcomings of the studies are summarized. New trends, challenges and future perspectives of exosome-driven POCT in liquid biopsy have been discussed.

Sensitive electrochemical sensing platform for selective determination of dopamine based on amorphous cobalt hydroxide/polyaniline nanofibers composites

In this study, amorphous cobalt hydroxide/polyaniline nanofibers (Co(OH)₂/PANINF) composites were successfully prepared. The formation of amorphous Co(OH)₂ with irregular surface structure was confirmed by x-ray diffraction, scanning electron microscopy, and selected-area electron diffraction. The non-enzymatic electrochemical sensor for the selective and sensitive determination of dopamine (DA) has been constructed by using Co(OH)₂/PANINF composites modified glassy carbon electrode (Co(OH)₂/PANINF/GCE), which exhibited excellent electrocatalytic activity toward DA, in a large part owing to the advantages of large surface area of amorphous Co(OH)₂ and the synergetic effect between Co(OH)₂ and PANINF. The electrochemical kinetics reveal that the DA oxidation involves two electrons and two protons in a quasi-reversible electrode reaction. Differential pulse voltammetry (DPV) studies show remarkable sensing performance for the determination of DA, with a low detection limit of 0.03 μM, and a wide linear range from 0.1 to 200 μM. From a broader perspective, the present study demonstrates that Co(OH)₂/PANINF composites would be promising supporting materials for novel sensing platforms.

The First Stages of Chemical and Electrochemical Aniline Oxidation—Spectroscopic Comparative Study

There are several types of aniline oligomers that can be formed in the early stages of aniline oxidation: linear oligomers with repeating units joined in para positions, and various branched and polycyclic oligomers, being the two most important groups. The fraction of these different oligomeric groups depends upon the reaction conditions of aniline oxidation. The aim of this study was to analyze the first products of the chemical and electrochemical oxidation of aniline at the (starting) pH 1 and 7, in order to specify the conditions of the formation of phenazine-like oligomers, and to test the theory that they have an important role in polyaniline film formation. We have confirmed that phenazine-like oligomers do not form at pH 1, neither in the chemical nor the electrochemical oxidation of aniline; however, they form in both chemical and electrochemical oxidation of aniline at pH 7. Phenazine-like oligomers are thus definitely not necessary intermediates for PANI film formation, not even in the chemical polymerization of aniline. Finally, the redox behavior of phenazine-like oligomers was demonstrated in a medium at pH 1.

Doping of transition metal dichalcogenides in molecularly imprinted conductive polymers for the ultrasensitive determination of 17β-estradiol in eel serum

Molecularly imprinted polymers (MIPs) have been developed to replace antibodies for the recognition of target molecules (such as antigens), and have been integrated into electrochemical sensing approaches by polymerization onto an electrode. Electrochemical sensing is inexpensive and flexible, and has demonstrated utility in point-of-care devices. In this work, several 2D (conductive) materials were employed to improve the performance of MIP sensors. Screen-printed electrodes were coated by the electropolymerization of aniline and metanilic acid, commingled with target molecules and various 2D materials. Tungsten disulfide (WS₂) with an average particle size of 2 μm was found to increase the sensitivity of detection of molecularly imprinted conductive polymer-coated electrodes to 17β-estradiol. As estradiol concentrations are important to eel aquaculture, we screened eel serum samples to determine their 17β-estradiol concentrations, which were found to be in the range 28.2 ± 3.6 to 73.0 ± 11.6 pg/mL after dilution. These results were in agreement with measurements using commercial immunoanalysis.