Lyotropic liquid crystal systems in drug delivery: a review

Gelling Lyotropic Liquid Crystals with the Organogelator 1,3:2,4-Dibenzylidene-d-sorbitol Part II: Microstructure

This study deals with the gelation of lyotropic liquid crystals (LLCs) of the binary system H₂O-heptaethylene glycol monododecyl ether (C₁₂E₇). The L_α and H₁ phases are gelled with the organogelator 1,3:2,4-dibenzylidene-d-sorbitol (DBS). The microstructure of the gelled LLCs is compared to those of the binary counterparts, i.e., the pure LLCs and the binary gel ethylene glycol-DBS. We present the first examples of gelled lyotropic liquid crystals (LLCs) formed by two different ways upon cooling: (1) At a DBS mass fraction of η = 0.015, the gel is formed first, followed by LLC formation. (2) At η = 0.0075, the LLC is formed first, followed by gel formation. Addressing LLC and gel formation in different orders, the influence of the LLC on the gel network and vice versa can be examined. Independent of which structure is formed first, the interlayer spacing d_LLC of the LLCs is only slightly larger in the presence of the gel network compared to the nongelled counterparts. Likewise, the influence of the LLCs on the gel fibers is independent of the chronology of the gel and LLC formation. For both ways, the gel fibers are twisted and arranged in bundles parallel to the bilayers of the L_α phase and the cylindrical micelles of the H₁ phase. Whereas the twisted structure of the gel fibers in ethylene glycol is retained in the presence of the LLCs, the arrangement in bundles is not observed in the binary gels. In the latter case, randomly distributed single fibers which are also slightly thinner are detected. However, we observed the fiber bundles independent of whether the gel network is formed in the isotropic phase or in the LLC and argue that the difference is caused by different interactions of organogelator DBS with the system H₂O-C₁₂E₇ than with ethylene glycol. In summary, we found that both the surfactant and the gelator molecules self-assemble in the presence of each other, leading to the coexistence of an LLC and a gel network. This is what is called orthogonal self-assembly.

Thermoresponsive gating membranes embedded with liquid crystal(s) for pulsatile transdermal drug delivery: An overview and perspectives

Due to the circadian rhythm regulation of almost every biological process in the human body, physiological and biochemical conditions vary considerably over the course of a 24-h period. Thus, optimal drug delivery and therapy should be effectively controlled to achieve the desired therapeutic plasma concentrations and therapeutic drug responses at the required time according to chronopharmacological concepts, rather than continuous maintenance of constant drug concentrations for an extended time period. For many drugs, it is not always necessary to constantly deliver a drug into the human body under disease conditions due to rhythmic variations. Pulsatile drug delivery systems (PDDSs) have been receiving more attention in pharmaceutical development by providing a predetermined lag period, followed by a fast or rate-controlled drug release after application. PDDSs are characterized by a programmed drug release, which may release a drug at repeatable pulses to match the biological and clinical needs of a given disease therapy. This review article focuses on thermoresponsive gating membranes embedded with liquid crystals (LCs) for transdermal drug delivery using PDDS technology. In addition, the principal rationale and the advanced approaches for the use of PDDSs, the marketed products of chronotherapeutic DDSs with pulsatile function designed by various PDDS technologies, pulsatile drug delivery designed with thermoresponsive polymers, challenges and opportunities of transdermal drug delivery, and novel approaches of LC systems for drug delivery are reviewed and discussed. A brief overview of all academic research articles concerning single LC- or binary LC-embedded thermoresponsive membranes with a switchable on-off permeation function through topical application by an external temperature control, which may modulate the dosing interval and administration time according to the therapeutic needs of the human body, is also compiled and presented. In the near future, since thermal-based approaches have become a well-accepted method to enhance transdermal delivery of different water-soluble drugs and macromolecules, a combination of the thermal-assisted approach with thermoresponsive LCs membranes will have the potential to improve PDDS applications but still poses a great challenge.

Gelation of Lyotropic Liquid-Crystal Phases-The Interplay between Liquid Crystalline Order and Physical Gel Formation

We present a systematical investigation of gelled lyotropic liquid crystals (LLCs). This new class of soft materials combines the anisotropy of LLCs with the mechanical stability of a physical gel. The studied LLC system consists of sodium dodecyl sulfate as a surfactant, n-decanol as a cosurfactant, and water as a solvent. At room temperature, four liquid crystalline phases (lamellar L_α, nematic N_d and N_c, and hexagonal H₁) are formed depending on the composition. We were successful in gelling the lyotropic lamellar phase with the low-molecular-weight organogelator 12-hydroxyoctadecanoic acid (12-HOA). The obtained gelled lamellar phase shows optical birefringence, elastic response, and no macroscopic flow. However, we were not able to obtain gels with hexagonal or nematic structure. These findings can be explained twofold. When gelling the hexagonal phase, the long-range hexagonal order was destroyed and an isotropic gel was formed. The reason might be the incompatibility between the gel fiber network and the two-dimensional long-range translational order of the cylindrical micelles in the hexagonal phase. Otherwise, the lyotropic nematic phase was transformed into an anisotropic gel with the lamellar structure during gelation. Evidently, the addition of the gelator 12-HOA to the lyotropic system considerably widens the lamellar regime because the integration of the surface-active 12-HOA gelator molecules into the nematic micelles flattens out the micelle curvature. We further investigated the successfully gelated L_α phase to examine the impacts of the gel network and the remaining monomeric gelator on both the structure and properties of the gelled lamellar phase. Small-angle X-ray scattering results showed an arrested lamellar layer spacing in the gelled state, which indicates a higher translational order for the gelled lamellar phases in comparison with their gelator-free counterparts.

Tuning gelled lyotropic liquid crystals (LLCs) - probing the influence of different low molecular weight gelators on the phase diagram of the system H2O/NaCl-Genapol LA070

Gelled lyotropic liquid crystals (LLCs) are highly tunable multi-component materials. By studying a selection of low molecular weight gelators (LMWGs), we find gelators that form self-assembled gels in LLCs without influencing their phase boundaries. We studied the system H2O/NaCl-Genapol LA070 in the presence of (a) the organogelators 12-hydroxyoctadecanoic acid (12-HOA) and 1,3:2,4-dibenzylidene-d-sorbitol (DBS) and (b) the hydrogelators N,N'-dibenzoyl-l-cystine (DBC) and a tris-amido-cyclohexane derivative (HG1). Visual phase studies and oscillation shear frequency sweeps confirmed that 12-HOA acts as co-surfactant (stabilizing the lamellar Lα phase and destabilizing the hexagonal H1 phase), thus preventing gelation. Conversely, DBS was a potent gelator for LLCs, with the phase boundaries un-influenced by the presence of DBS; gelled lamellar Lα, and softly-gelled hexagonal H1 phases are formed. For the hydrogelator DBC, the LLC phase boundaries were only slightly altered, but no gelled LLCs were formed. For the hydrogelator HG1, however, the phase boundaries were unaffected while gelled lamellar Lα and softly-gelled hexagonal H1 phases were formed. Temperature-dependent rheology measurements demonstrated that by changing the DBS or the HG1 concentration, the sol-gel transition temperature of the gelled lamellar Lα phase can be adjusted such that (a) Tsol-gel is below the Lα-isotropic phase transition (DBS, HG1 mass fraction η = 0.0075) and (b) Tsol-gel is above the gelled Lα-isotropic phase transition (DBS, HG1 η = 0.015). This opens the possibility of temporal materials control by addressing phase transitions in different orders. As this system contains oil and water, both the organogelator DBS and the hydrogelator HG1 can gel these LLCs, but this clearly does not apply to all organogelators/hydrogelators. The study indicates that careful optimization of LMWGs is required to avoid interaction with the surfactant layer and to optimize the Tsol-gel value, which is important for the application of LMWGs in gelled LLCs.

Liquid crystal delivery of ciprofloxacin to treat infections of the female reproductive tract

Infections of the female reproductive tract are a major cause of morbidity and mortality in humans, requiring significant investment to sustain treatment and representing a major challenge to health. The increasing prevalence of bacterial resistance, and an almost complete absence of new antibiotic therapies for the past five decades, mean there is a desperate need for novel approaches to the treatment of bacterial infections. Within the present study, we demonstrate the effective ex vivo treatment of bacterial infection of the female reproductive tract using a controlled-release, liquid crystal-based platform. Liquid crystal encapsulation of ciprofloxacin significantly enhanced its bactericidal efficacy and reduced cell toxicity. Liquid crystal structures are low-cost, simple to manufacture and provide a sustained-release profile of encapsulated ciprofloxacin. Treatment of Escherichia coli infected reproductive tract epithelial cells and whole organ cultures with liquid crystal encapsulated ciprofloxacin proved to be an effective strategy for reducing bacterial load and reproductive tract inflammatory responses to infection. These data suggest that such an approach could provide an efficacious treatment modality for enhancing the effectiveness of current antibiotic therapies.

Development and Characterization of Nanostructured Pharmacosomal Mesophases: An Innovative Delivery System for Bioactive Peptides

Purpose: To potentially enhance the bioavailability and extend the bioactivity effectiveness of Isoleucine-Proline-Proline (IPP, an antihypertensive bioactive peptide of dairy origin), a novel Lyotropic Liquid Crystalline Pharmacosomal Nanoparticle (LLCPNP) was synthesized, and its physicochemical and technological characteristics were studied.

Methods: LLCPNPs precursors were developed using IPP and soy phosphatidylcholine via complex formation. Polarized light microscopy, small angle X-ray scattering, differential scanning calorimetry, dynamic light scattering and Fourier transform infrared spectroscopy were employed to characterize the physicochemical properties of the nanoparticles. The in-vitro release and its related mechanisms were also studied.

Results: Fourier transform infrared spectroscopy confirmed the complexation between the components of LLCPNPs. Phase behavior evaluation by polarized light microscope showed the characteristic birefringent texture. These findings along with those of small angle X-ray scattering and differential scanning calorimetry proved the formation of lamellar LLCPNPs. These particles represented nanometric size (<100 nm), high incorporation efficiency (93.72%) and proper physicochemical stability during long-term storage. In-vitro studies demonstrated a sustained release behavior fitted to non-Fickian diffusion and Higuchi kinetic models.

Conclusion: The present study results emphasized that LLCPNPs could be proposed as an unrivaled carrier to promote the bioavailability, stability and shelf-life of nutraceutical and biopharmaceutical formulations containing bioactive peptides.

The Twofold Role of 12-Hydroxyoctadecanoic Acid (12-HOA) in a Ternary Water-Surfactant-12-HOA System: Gelator and Co-Surfactant

Gelled lyotropic liquid crystals can be formed by adding a gelator to a mixture of surfactant and solvent. If the gel network and the liquid-crystalline phase coexist without influencing each other, the self-assembly is called orthogonal. In this study, the influence of the organogelator 12-hydroxyoctadecanoic acid (12-HOA) on the lamellar and hexagonal liquid crystalline phases of the binary system H₂O–C₁₂E₇ (heptaethylene glycol monododecyl ether) is investigated. More precisely, we added 12-HOA at mass fractions from 0.015 to 0.05 and studied the resulting phase diagram of the system H₂O–C₁₂E₇ by visual observation of birefringence and by ²H NMR spectroscopy. In addition, the dynamic shear moduli of the samples were measured in order to examine their gel character. The results show that 12-HOA is partly acting as co-surfactant, manifested by the destabilization of the hexagonal phase and the stabilization of the lamellar phase. The higher the total surfactant concentration, the more 12-HOA is incorporated in the surfactant layer. Accordingly, its gelation capacity is substantially reduced in the surfactant solution compared to the system 12-HOA–n-decane, and large amounts of gelator are required for gels to form, especially in the lamellar phase.

Characterization and In Vitro Permeation Study of Cubic Liquid Crystal Containing Sinomenine Hydrochloride

This study developed a new transdermal delivery system for the improved delivery of sinomenine hydrochloride (SH). The delivery system utilized the advantages of lyotropic liquid crystals (LLC) creating an adaptable system that offers a variety of options for the field of transdermal delivery. The formulation was prepared, characterized, and evaluated for its skin penetration in vitro. In the study, the appearance of samples was characterized by visual observation, and these LLC gels were colorless and transparent. Polarizing light microscopy (PLM) and small-angle X-ray diffraction (SAXS) were used to analyze the internal structures of gels, and the gels displayed a cubic double-diamond (P_n3_m) internal structure with a dark field of vision. The Franze diffusion cell was used to evaluate its skin penetration. There were several factors which might influence the skin penetration of drugs, such as drug loading, water content, and the layer spacing of the LLC. In our case, drug concentration gradient played a more powerful role. The result of in vitro permeation studies demonstrated that the drug concentration was higher; the cumulative osmotic quantity of SH (Q) was greater. Therefore, the system was a promising formulation for successful percutaneous delivery of SH through the skin.

Active Gating, Molecular Pumping, and Turnover Determination in Biomimetic Lipidic Cubic Mesophases with Reconstituted Membrane Proteins

Understanding the mechanisms controlling molecular transport in bioinspired materials is a central topic in many branches of nanotechnology. In this work, we show that biomolecules of fundamental importance in biological processes, such as glucose, can be transported in an active, controlled, and selective manner across macroscopic lipidic cubic mesophases, by correctly reconstituting within them their corresponding membrane protein transporters, such as Staphylococcus epidermidis (GlcP_Se). Importantly, by duly exploiting the symporter properties of GlcP_Se of coupled glucose/H⁺ transport, the diffusion of glucose can further be tuned by independent physiological stimuli, such as parallel or antiparallel pH gradients, offering an important model to study molecular exchange processes in cellular machinery. We finally show that by measuring the transport properties of the lipidic mesophases with and without the GlcP_Se membrane protein reconstituted within, it becomes possible to determine its intrinsic conductance. We generalize these findings to other membrane proteins from the antiporters family, such as the bacterial ClC exchanger from Escherichia coli (EcClC), providing a robust method for evaluating the turnover rate of the membrane proteins in general.

Gelling Lamellar Phases of the Binary System Water-Didodecyldimethylammonium Bromide with an Organogelator

Does the presence of a gel network influence the properties of a lyotropic liquid crystal? Does the replacement of oil by a lyotropic liquid crystal influence the properties of an organogel? To answer these questions we study gelled lyotropic liquid crystals (LLC). In the present study we show that it is possible to gel the lamellar phase of the binary system water-didodecyl dimethylammonium bromide (2C₁₂DAB) with the organogelator 12-hydroxyoctadecanoic acid (12-HOA). We compare various properties of the gelled LLC phases with the "parent systems", i.e., with the binary organogel consisting of n-decane-12-HOA and with the nongelled LC phases, respectively. Optical and electron microscopy, differential scanning calorimetry (DSC), rheometry, as well as small and wide-angle X-ray scattering (SWAXS) proved the coexistence of an L_α phase and a 12-HOA gel network in the gelled L_α phase. However, a small influence of the L_α phase on the gel properties was seen, namely slightly lower sol-gel transition temperatures and viscoelastic moduli of the gelled L_α phase compared to the binary gel. On the other hand, the presence of the gel also has an influence on the L_α phase: the interlayer spacing of the surfactant bilayers in the gelled L_α phases is slightly larger compared to the nongelled L_α phases, which is due to mixing part of the 12-HOA molecules in the L_α bilayers. Despite this mutual influence the structures of both the L_α phase and the gel network are hardly disturbed in the gelled L_α phase, i.e., that the self-assembly of the surfactant and of the gelator molecules clearly occur in an orthogonal way.

Engineering Compartmentalized Biomimetic Micro- and Nanocontainers

Compartmentalization of biological content and function is a key architectural feature in biology, where membrane bound micro- and nanocompartments are used for performing a host of highly specialized and tightly regulated biological functions. The benefit of compartmentalization as a design principle is behind its ubiquity in cells and has led to it being a central engineering theme in construction of artificial cell-like systems. In this review, we discuss the attractions of designing compartmentalized membrane-bound constructs and review a range of biomimetic membrane architectures that span length scales, focusing on lipid-based structures but also addressing polymer-based and hybrid approaches. These include nested vesicles, multicompartment vesicles, large-scale vesicle networks, as well as droplet interface bilayers, and double-emulsion multiphase systems (multisomes). We outline key examples of how such structures have been functionalized with biological and synthetic machinery, for example, to manufacture and deliver drugs and metabolic compounds, to replicate intracellular signaling cascades, and to demonstrate collective behaviors as minimal tissue constructs. Particular emphasis is placed on the applications of these architectures and the state-of-the-art microfluidic engineering required to fabricate, functionalize, and precisely assemble them. Finally, we outline the future directions of these technologies and highlight how they could be applied to engineer the next generation of cell models, therapeutic agents, and microreactors, together with the diverse applications in the emerging field of bottom-up synthetic biology.

Physical characterization using diffusion NMR spectroscopy

NMR diffusion measurements (or dNMR) provide a powerful tool for analysis of solution organization and microgeometry of the environment by probing random molecular motion. Being a very versatile method, dNMR can be applied to a large variety of samples and systems. Here, a brief introduction into dNMR and a summary of recent advances in the field are presented. The research topics include restricted diffusion, anisotropic diffusion, polymer dynamics, solution structuring and dNMR method development. The dNMR studied systems include plants, cells (cell models), liquid crystals, polymer solutions, ionic liquids, supercooled solutions, untreated water, amino acid solutions and more. It is demonstrated how a variety of dNMR methods can be applied to a system to extract the data on particular structures present among, formed by or surrounding the diffusing particles. It is also demonstrated how dNMR methods can be developed to allow probing larger geometries, low sample concentrations and faster processes. Copyright © 2016 John Wiley & Sons, Ltd.

Spotlight on Biomimetic Systems Based on Lyotropic Liquid Crystal

The behavior of lyotropic biomimetic systems in drug delivery was reviewed. These behaviors are influenced by drug properties, the initial water content, type of lyotropic liquid crystals (LLC), swell ability, drug loading rate, the presence of ions with higher or less kosmotropic or chaotropic force, and the electrostatic interaction between the drug and the lipid bilayers. The in vivo interaction between LCC-drugs, and the impact on the bioavailability of drugs, was reviewed. The LLC with a different architecture can be formed by the self-assembly of lipids in aqueous medium, and can be tuned by the structures and physical properties of the emulsion. These LLC lamellar phase, cubic phase, and hexagonal phase, possess fascinating viscoelastic properties, which make them useful as a dispersion technology, and a highly ordered, thermodynamically stable internal nanostructure, thereby offering the potential as a sustained drug release matrix for drug delivery. In addition, the biodegradable and biocompatible nature of lipids demonstrates a minimum toxicity and thus, they are used for various routes of administration. This review is not intended to provide a comprehensive overview, but focuses on the advantages over non modified conventional materials and LLC biomimetic properties.

Phytantriol based smart nano-carriers for drug delivery applications

From the last couple of decades, lyotropic liquid crystals have garnered enormous attentions in medical and pharmaceutical sciences. Non-toxic, chemically stable, and biocompatible properties of these liquid crystal systems are contributing to their applications for drug delivery. Among a large variety of liquid crystal phases, inverse bicontinuous cubic and inverse hexagonal mesophases have been extensively investigated for their ability to encapsulate and controlled release of bioactive molecules of various sizes and polarity. The concept of changing the drug release rate in situ by simply changing the mesophase structure is much more fascinating. The encapsulation of bioactive compounds in mesophase systems of desirable features in sub-micron sized particles such as hexosomes and cubosomes, at ambient and high temperature is bringing innovation in the development of new drug applications. This review article outlines unique structural features of cubosomes and hexosomes, their methods of productions, factors affecting their formations and their potential utilization as smart nano-carriers for biopharmaceuticals in drug delivery applications.

Structural Features and the Anti-Inflammatory Effect of Green Tea Extract-Loaded Liquid Crystalline Systems Intended for Skin Delivery

Camellia sinensis, which is obtained from green tea extract (GTE), has been widely used in therapy owing to the antioxidant, chemoprotective, and anti-inflammatory activities of its chemical components. However, GTE is an unstable compound, and may undergo reactions that lead to a reduction or loss of its effectiveness and even its degradation. Hence, an attractive approach to overcome this problem to protect the GTE is its incorporation into liquid crystalline systems (LCS) that are drug delivery nanostructured systems with different rheological properties, since LCS have both fluid liquid and crystalline solid properties. Therefore, the aim of this study was to develop and characterize GTE-loaded LCS composed of polyoxypropylene (5) polyoxyethylene (20) cetyl alcohol, avocado oil, and water (F25E, F29E, and F32E) with different rheological properties and to determine their anti-inflammatory efficacy. Polarized light microscopy revealed that the formulations F25, F29, and F32 showed hexagonal, cubic, and lamellar liquid crystalline mesophases, respectively. Rheological studies showed that F32 is a viscous Newtonian liquid, while F25 and F29 are dilatant and pseudoplastic non-Newtonian fluids, respectively. All GTE-loaded LCS behaved as pseudoplastic with thixotropy; furthermore, the presence of GTE increased the S values and decreased the n values, especially in F29, indicating that this LCS has the most organized structure. Mechanical and bioadhesive properties of GTE-unloaded and -loaded LCS corroborated the rheological data, showing that F29 had the highest mechanical and bioadhesive values. Finally, in vivo inflammation assay revealed that the less elastic and consistent LCS, F25E and F32E presented statistically the same anti-inflammatory activity compared to the positive control, decreasing significantly the paw edema after 4 h; whereas, the most structured and elastic LCS, F29E, strongly limited the potential effects of GTE. Thereby, the development of drug delivery systems with suitable rheological properties may enhance GTE bioavailability, enabling its administration via the skin for the treatment of inflammation.

Comparison of solvent-wetted and kneaded l-sulpiride-loaded solid dispersions: Powder characterization and in vivo evaluation

The purpose of this study was to compare the powder properties, solubility, dissolution and oral absorption of solvent-wetted (SWSD) and kneaded (KNSD) l-sulpiride-loaded solid dispersions. The SWSD and KNSD were prepared with silicon dioxide, sodium laurylsulfate and D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) using a spray dryer and high shear mixer, respectively. Their powder properties, solubility, dissolution and oral absorption were assessed compared to l-sulpiride powder. The drug in SWSD was in the amorphous state; however, in KNSD, it existed in the crystalline state. The SWSD with a drug/sodium laurylsulphate/TPGS/silicon dioxide ratio of 5/1/2/12 gave the higher drug solubility and dissolution compared to the KNSD with the same composition. The oral absorption of drug in the SWSD was 1.4 fold higher than the KNSD and 3.0 fold higher than the l-sulpiride powder (p<0.05) owing to better solubility and reduced crystallinity. Furthermore, the SWSD at the half dose was bioequivalent of commercial l-sulpiride-loaded product in rats. Thus, the SWSD with more improved oral absorption would be recommended as an alternative for the l-sulpiride-loaded oral administration.