Studies on plasmid replication. I. Plasmid incompatibility and establishment in Staphylococcus aureus

A dye release assay for determination of lysostaphin activity

We describe a method for determination of lysostaphin activity using Remazol Brilliant Blue R (RBB)-dyed staphylococcal cells or RBB-dyed staphylococcal peptidoglycan as substrate. The dyed substrates are easy to prepare and are stable for at least 6 months. Soluble hydrolytic products released by lysostaphin are measured spectrophotometrically at 595 nm after the insoluble substrate is removed by filtration or centrifugation. The dye release assay is more sensitive and more accurate than the previously described turbidimetric assay.

Comparative analysis of five related Staphylococcal plasmids

The genomic organization of five small multicopy staphylococcal plasmids comprising the pT181 family has been analyzed. In addition to pT181, the family presently includes the streptomycin resistance plasmid pS194 and the chloramphenicol resistance plasmids pC221, pC223, and pUB112. Although they belong to five different incompatibility groups, the five plasmids have similar basic replicons, use the same basic copy control mechanism, and have a common structural organization. It has been demonstrated previously that pT181 and pC221 encode trans-active replication proteins (RepC and RepD, respectively) which specifically recognize the respective plasmid's origin of replication in both cases is initiated by site-specific nicking and 3' extension. The other three plasmids in this family encode similar replication proteins; 63% of the predicted amino acid residues are identical for all five and the least similar pair shows 75% identity at the amino acid level. However, despite this homology, the replication proteins and origins of replication of different members in this family did not show cross complementation in vivo. Outside of the basic replicon, which comprises about one-third of each plasmid's genome, functional organization is also conserved. The resistance determinants are all located in the same position, immediately downstream of the replication protein coding sequence, and all are transcribed in the same direction. The three chloramphenicol resistance determinants encode highly homologous chloramphenicol transacetylases which are unrelated to the tet and str gene products. Three of the five plasmids form relaxation complexes and the involved genome segments are closely related. The other two are not homologous to these three in the corresponding region, but are homologous to each other and encode a site-specific recombinase, Pre. It is suggested that the replication, resistance, and relaxation complex regions of these plasmids can be regarded as conserved segments ("cassettes") assembled in various combinations, but always with the same spatial arrangement.

Intermediates in plasmid pT181 DNA replication

Staphylococcus aureus plasmid pT181 is thought to replicate via an asymmetric rolling-circle mechanism. By studying pulse labeled replicative intermediates, here we report that pT181 replication involves: (1) a post-replicative hypersupercoiled monomer and (2) a partially replicated intermediate which lacks superhelicity but is unlike a typical rolling-circle intermediate in that only nascent strands of less than unit length are released by alkali denaturation. A model for pT181 replication is proposed to accommodate this apparent discrepancy.

Nucleotide sequence of pS194, a streptomycin-resistance plasmid from Staphylococcus aureus

pS194 is a naturally occurring Staphylococcus aureus plasmid encoding streptomycin resistance. The plasmid has a copy number of about 25 per cell, and belongs to the inc5 incompatibility group. The nucleotide sequence of pS194 has been determined and consists of 4397 base pairs including four open reading frames potentially encoding proteins of greater than 100 amino acids. All four of these reading frames are on the same coding strand. The first reading frame, repE, encodes a 38 kd protein specifically required for pS194 replication. The second open reading frame, str, encodes a 34 kd polypeptide required for streptomycin resistance, probably a streptomycin adenylyltransferase. The third potential polypeptide, rlx, would be 37 kd and is probably required for relaxation complex formation and plasmid mobilization by conjugative plasmids. The fourth, orfD, overlapping the rlx reading frame, is potentially 27 kd, and may also be involved in mobilization.

Genetic studies on toxic shock syndrome toxin-1 (TSST-1) producing Staphylococcus aureus strains from Austria, the USA and West Germany

DNA preparations obtained from 10 different toxic shock syndrome toxin-1 positive S. aureus strains from Austria, the USA and West Germany were examined in respect of their homology to the TSST-1 gene of pRN6101. Whole cell DNA was digested with HpaII or EcoRI, separated on agarose gels and transferred to nitrocellulose; furthermore the dotblot procedure was used. The radioactively labelled gene probe used was the 300 bp BamHI-HindII fragment of the TSST-1 gene region of pRN6101. All S. aureus strains had homology with this fragment. Homology was located on fragments of different molecular size. Therefore it is concluded that the TSST-1 DNA fragment has different locations in the chromosome of different S. aureus strains.

A rapid method to quantitate non-labeled RNA species in bacterial cells

We have developed a rapid method to quantitate specific bacterial RNA species. The method measures the steady-state level of RNA, produces a linear response over more than a 16-fold range of RNA concentration, and can be used for Staphylococcus aureus, Escherichia coli and Bacillus subtilis. In this method, a sheared whole-cell lysate of approx. 7 x 10(8) organisms, prepared as for plasmid screening, is separated on agarose, blotted to a nitrocellulose filter, hybridized with a radiolabeled DNA probe, and autoradiographed. The RNA species are quantitated by counting the radioactive bands on the filter. We have applied the method to the measurement of mRNA induction of the genes encoding beta-lactamase, ermC rRNA methylase, and the alpha-complementing fragment of beta-galactosidase. Upon induction, a ten-fold increase in the mRNA for each gene was observed. The peak mRNA level occurred after 30 min for beta-lactamase, 20 min for beta-galactosidase, and 5 min for the ermC rRNA methylase.

Nucleotide sequence of the type A staphylococcal enterotoxin gene

We determined the nucleotide sequence of the gene encoding staphylococcal enterotoxin A (entA). The gene, composed of 771 base pairs, encodes an enterotoxin A precursor of 257 amino acid residues. A 24-residue N-terminal hydrophobic leader sequence is apparently processed, yielding the mature form of staphylococcal enterotoxin A (Mr, 27,100). Mature enterotoxin A has 82, 72, 74, and 34 amino acid residues in common with staphylococcal enterotoxins B and C1, type A streptococcal exotoxin, and toxic shock syndrome toxin 1, respectively. This level of homology was determined to be significant based on the results of computer analysis and biological considerations. DNA sequence homology between the entA gene and genes encoding other types of staphylococcal enterotoxins was examined by DNA-DNA hybridization analysis with probes derived from the entA gene. A 624-base-pair DNA probe that represented an internal fragment of the entA gene hybridized well to DNA isolated from EntE+ strains and some EntA+ strains. In contrast, a 17-base oligonucleotide probe that encoded a peptide conserved among staphylococcal enterotoxins A, B, and C1 hybridized well to DNA isolated from EntA+, EntB+, EntC1+, and EntD+ strains. These hybridization results indicate that considerable sequence divergence has occurred within this family of exotoxins.

Replication properties of pIM13, a naturally occurring plasmid found in Bacillus subtilis, and of its close relative pE5, a plasmid native to Staphylococcus aureus

A naturally occurring plasmid from Bacillus subtilis, pIM13, codes for constitutively expressed macrolide-lincosamide-streptogramin B (MLS) resistance, is stably maintained at a high copy number, and exists as a series of covalent multimers. The complete sequence of pIM13 has been reported (M. Monod, C. Denoya, and D. Dubnau, J. Bacteriol. 167:138-147, 1986) and two long open reading frames have been identified, one of which (ermC') is greater than 90% homologous to the ermC MLS resistance determinant of the Staphylococcus aureus plasmid pE194. The second reading frame (repL) shares homology with the only long open reading frame of the cryptic S. aureus plasmid pSN2 and is probably involved in plasmid replication. The map of pIM13 is almost a precise match with that of pE5, a naturally occurring, stable, low-copy-number, inducible MLS resistance plasmid found in S. aureus. pIM13 is unstable in S. aureus but still multimerizes in that host, while pE5 is unstable in B. subtilis and does not form multimers in either host. The complete sequence of pE5 is presented, and comparison between pIM13 and pE5 revealed two stretches of sequence present in pE5 that were missing from pIM13. It is likely that a 107-base-pair segment in the ermC' leader region missing from pIM13 accounts for the constitutive nature of the pIM13 MLS resistance and that the lack of an additional 120-base-pair segment in pIM13 that is present on pE5 gives rise to the high copy number, stability, and multimerization in B. subtilis. The missing 120 base pairs occur at the carboxyl-terminal end of the putative replication protein coding sequence and results in truncation of that protein. It is suggested either that the missing segment contains a site involved in resolution of multimers into monomers or that the smaller replication protein causes defective termination of replication. It is concluded that pIM13 and pE5 are coancestral plasmids and it is probable that pIM13 arose from pE5.

Replication properties of pIM13, a naturally occurring plasmid found in Bacillus subtilis, and of its close relative pE5, a plasmid native to Staphylococcus aureus

A naturally occurring plasmid from Bacillus subtilis, pIM13, codes for constitutively expressed macrolide-lincosamide-streptogramin B (MLS) resistance, is stably maintained at a high copy number, and exists as a series of covalent multimers. The complete sequence of pIM13 has been reported (M. Monod, C. Denoya, and D. Dubnau, J. Bacteriol. 167:138-147, 1986) and two long open reading frames have been identified, one of which (ermC') is greater than 90% homologous to the ermC MLS resistance determinant of the Staphylococcus aureus plasmid pE194. The second reading frame (repL) shares homology with the only long open reading frame of the cryptic S. aureus plasmid pSN2 and is probably involved in plasmid replication. The map of pIM13 is almost a precise match with that of pE5, a naturally occurring, stable, low-copy-number, inducible MLS resistance plasmid found in S. aureus. pIM13 is unstable in S. aureus but still multimerizes in that host, while pE5 is unstable in B. subtilis and does not form multimers in either host. The complete sequence of pE5 is presented, and comparison between pIM13 and pE5 revealed two stretches of sequence present in pE5 that were missing from pIM13. It is likely that a 107-base-pair segment in the ermC' leader region missing from pIM13 accounts for the constitutive nature of the pIM13 MLS resistance and that the lack of an additional 120-base-pair segment in pIM13 that is present on pE5 gives rise to the high copy number, stability, and multimerization in B. subtilis. The missing 120 base pairs occur at the carboxyl-terminal end of the putative replication protein coding sequence and results in truncation of that protein. It is suggested either that the missing segment contains a site involved in resolution of multimers into monomers or that the smaller replication protein causes defective termination of replication. It is concluded that pIM13 and pE5 are coancestral plasmids and it is probable that pIM13 arose from pE5.

Staphylococcus aureus producing toxic shock syndrome toxin 1 (TSST-1) in clinical specimens and vaginal swabs in Mannheim, West Germany

624 Staphylococcus aureus strains from our clinical laboratory were screened for toxic shock syndrome toxin 1 (= TSST-1) production and 16.7% of the strains were found to be positive. TSST-1-positive strains were isolated from material which originated from males and females with the same frequency. The strains were found in swabs from the respiratory tract, the conjunctiva, in sputum and wounds. TSST-1-positive strains were more resistant to arsenate and cadmium ions than non-producers; their sensitivity to the antibiotics (when tested), was no different. The toxin-producing strains were lysed above all by the bacteriophages 29, 52, 80, 55, 75 and 83A. We isolated 19 S. aureus strains from 321 vaginal swabs: one of these strains was TSST-1-positive. Most of the strains were found in swabs from women using tampons. It has been concluded that the infection with TSST-1 positive S. aureus is either of subclinical course or that in most of the cases, the syndrome is of a less dramatic course than usually described. Quite certainly the syndrome is underdiagnosed in Germany.

Translational fusion with a secretory enzyme as an indicator

A novel type of translational fusion system has been developed by using a secretory protein, staphylococcal beta-lactamase, as an indicator. The beta-lactamase structural gene was modified to provide N-terminal extensions of 13 and 162 amino acids, and in both cases, the fusion protein was processed and the mature active enzyme was secreted; thus, the expression of a particular upstream gene can be analyzed by monitoring the beta-lactamase activity.

Molecular epidemiology of macrolides-lincosamides-streptogramin B resistance in Staphylococcus aureus and coagulase-negative staphylococci

Macrolides-lincosamides-streptogramin B (MLS) resistance is commonly found in Staphylococcus aureus and coagulase-negative staphylococci (22 and 45%, respectively, among isolates from three New Jersey hospitals). We have examined representative subsets of 107 MLS-resistant isolates for the molecular nature of the resistance determinant, the erm gene, by dot blot and Southern hybridization analysis. All of 35 S. aureus isolates examined and 39 of 42 coagulase-negative isolates examined were found to harbor the ermA or ermC evolutionary variant. Genes of the ermC class occurred exclusively on a small plasmid similar to or indistinguishable from one (pNE131) previously described in S. epidermidis. Genes of the ermA class occurred exclusively in the chromosome, and restriction patterns indicated that they were part of a transposon, Tn554, characteristic of the classical S. aureus ermA strain. Unlike S. aureus ermA strains examined previously, which harbor Tn554 at a single specific (primary) site, four of our S. aureus isolates had second inserts at different chromosomal sites. The majority of our coagulase-negative isolates had two or more inserts, neither of which occurred at the classical primary site and many of which differed from one another in location (as inferred from restriction patterns). Coagulase-negative staphylococci constitute a large reservoir of the ermA and ermC class of determinants, with clear potential for interspecies spread.

Transfer of the conjugal tetracycline resistance transposon Tn916 from Streptococcus faecalis to Staphylococcus aureus and identification of some insertion sites in the staphylococcal chromosome

The Streptococcus faecalis pheromone-dependent conjugative plasmid pAD1::Tn916 and the membrane filter-dependent conjugative plasmid pPD5::Tn916 were used to introduce Tn916 into Staphylococcus aureus by intergeneric protoplast fusions and intergeneric membrane-filter matings. In recombinants obtained by protoplast fusion where no plasmid DNA could be detected, tetracycline resistance resulted from transposition of Tn916 from pAD1 to the S. aureus chromosome. Transformation analyses showed that S. aureus Tn916 chromosomal insertions occurred near pig, ilv, uraA, tyrB, fus, ala, and the trp operon. DNA hybridization analyses of EcoRI- and HindIII-digested chromosomal DNAs confirmed the diversity of chromosomal sites involved and demonstrated that the inserts were Tn916 insertions rather than integrations of all or part of pAD1::Tn916. Both pAD1::Tn916 and pPD5::Tn916 were transferred to S. aureus by membrane-filter matings. These plasmids remained intact and expressed tetracycline resistance in S. aureus. S. aureus strains carrying pAD1::Tn916, but not a chromosomal insert of Tn916, and any one of several conjugal gentamicin-resistance plasmids lost their ability to serve as conjugal donors of the gentamicin-resistance plasmids.

Plasmid repopulation kinetics in Staphylococcus aureus

We have analyzed the kinetic route by which the indirectly controlled Staphylococcus aureus plasmid, pT181, responds to and corrects fluctuations in copy number. The kinetics of copy number correction from low to steady-state levels (termed repopulation) were determined using two different methods of copy number reduction. Thermosensitive replication (Tsr) mutants of pT181 were grown at nonpermissive temperatures to lower copy number and then shifted to a permissive temperature to allow repopulation. After the downshift, both wild-type and copy mutant plasmids, with active inhibitors, exhibited a burst of exponential replication that resulted in a two- to threefold overshoot of normal steady-state copy numbers. This was followed by inhibition of replication and eventual reestablishment of the steady-state replication rate. Similar replication kinetics were observed when these plasmids were introduced into naive cells by high-frequency transduction. By contrast, a pT181 copy mutant with a nonfunctional inhibitor-target regulation did not overshoot its steady-state copy number, but instead repopulated asymptotically. These results suggest that at low copy numbers, pT181 and its derivatives replicate at near-maximal rates and overshoot prior to the establishment of an inhibitory concentration of repressor. The maximal replication rate is independent of the plasmid's cop genotype. As the copy number increases, inhibitor accumulates and eventually reduces the replication rate. In the absence of an active inhibitor, the steady-state copy number is established at a level that must be limited by some other invariant factor.

Cloning, sequence, and expression of the lysostaphin gene from Staphylococcus simulans

A 1.5-kilobase-pair fragment of DNA that contains the lysostaphin gene from Staphylococcus simulans and its flanking sequences has been cloned and completely sequenced. The gene encodes a preproenzyme of Mr 42,000. The NH2-terminal sequence of the preproenzyme is composed of a signal peptide followed by seven tandem repeats of a 13-amino acid sequence. Conversion of prolysostaphin to the mature enzyme occurs extracellularly in cultures of S. simulans and involves removal of the NH2-terminal portion of the proenzyme that contains the tandem repeats. The high degree of homology of the repeats suggests that they have arisen by duplication of a 39-base-pair sequence of DNA. In S. simulans, the lysostaphin gene is present on a large beta-lactamase plasmid.

Small Staphylococcus aureus plasmids are transduced as linear multimers that are formed and resolved by replicative processes

The molecular processes involved in the transduction of small staphylococcal plasmids by a generalized transducing phage, phi 11, have been analysed. The plasmids are transduced in the form of linear concatemers containing only plasmid DNA; plasmid-initiated replication is required for their generation but additive interplasmid recombination is not. Concatemers are probably generated by the interaction of one or more phage functions with replicating plasmid DNA. Insertion of any restriction fragment of the phage into the plasmid causes an approximately 10(5)-fold increase in transduction frequency, regardless of the size or genetic content of the fragment. The resulting transducing particles (Hft particles) contain mostly pure linear concatemers composed of tandem repeats of the plasmid::phage chimera, and their production requires active plasmid-initiated replication. The high frequency of transduction is a consequence of homologous recombination between the linear chimeric and phage concatemers, which has the effect of introducing an efficient pac site into the former. Following introduction into lysogenic recipient bacteria, the transducing DNA is first converted to the supercoiled form, then processed to monomers by a mechanism that requires the active participation of the plasmid replication system.

RepC is rate limiting for pT181 plasmid replication

The effect on pT181 plasmid replication of the concentration of the plasmid-coded initiator protein, RepC, has been analyzed. In one type of experiment, plasmid replication was found to stop immediately after the addition of an inhibitory concentration of chloramphenicol (Cm) to growing cultures. Chromosomal replication showed the slow turnoff that is usual for Cm inhibition. Because plasmid replication rate is determined autogenously, no host factor can be rate limiting, suggesting that the specific factor affected is Rep C. In another type of experiment, we constructed a translational fusion between the repC coding sequence and a translationally inducible Cm-acetylase gene, cat-86, using pUB110 as the carrier replicon. The fusion plasmid showed an eightfold amplification of its own copy number and a similar amplification of a co-resident pT181 plasmid upon Cm induction. The amplified plasmids did not show autocatalytic runaway replication but rather established stable elevated copy numbers, indicating the existence of a secondary level of regulation. These results suggest that RepC is rate limiting for pT181 replication and support the hypothesis that pT181 replication is regulated at the level of RepC synthesis. The nature of the secondary regulation is unknown.

Incompatibility between plasmids with independent copy control

Incompatibility between autonomous plasmids has been attributed, for the most part, to interaction between plasmids' negative control systems and/or partitioning systems. In this report it is shown that indirectly regulated plasmids with non-interactive negative control systems are incompatible on the basis of their shared initiator protein. This principle was demonstrated for a family of Staphylococcus aureus plasmids whose copy number is regulated by inhibitory RNAs that control the production of a rate-limiting, trans-active, initiator protein. We have constructed a pair of plasmids that have the same regulation systems and different initiator proteins and another pair with different regulation systems and the same initiators. Both of these pairs of plasmids were shown to be incompatible.

Determination of aminoglycoside resistance in Staphylococcus aureus by DNA hybridization

A method is described for identification of the genes conferring aminoglycoside resistance in Staphylococcus aureus by dot-blot and Southern blot techniques. As radioactive probes, fragments of plasmids pAT48, pUBH2, and pH13, carrying the genes for an aminocyclitol-3'-phosphotransferase, an aminocyclitol-4'-adenylyltransferase, and an aminocyclitol-2''-phosphotransferase-aminocyclitol-6'-acetyltransferase, respectively, were used.

Regulation of exoprotein gene expression in Staphylococcus aureus by agar

Insertion of the erythromycin-resistance transposon Tn551 into the Staphylococcus aureus chromosome at a site which maps between the purB and ilv loci has a pleiotrophic effect on the production of a number of extracellular proteins. Production of alpha, beta and delta hemolysin, toxic shock syndrome toxin (TSST-1) and staphylokinase was depressed about fifty-fold while protein A production was elevated twenty-fold. Hybridization analysis showed that the defect in expression of TSST-1 and alpha hemolysin was at the transcriptional level. Inability of the mutant strain to express either a cloned TSST-1 gene or the chromosomal gene indicates that the transposon has inactivated a trans-active positive control element. This element has been designated agr for accessory gene regulator.

Streptococcus faecalis sex pheromone (cAM373) also produced by Staphylococcus aureus and identification of a conjugative transposon (Tn918)

Streptococcus faecalis RC73 was found to harbor a conjugative plasmid (pAM373) which confers a mating response to a sex pheromone (cAM373) excreted by plasmid-free members of the same species. The pheromone was also detected in culture filtrates of all of 23 Staphylococcus aureus strains but in only 2 of 22 coagulase negative staphylococcus strains. Streptococcus sanguis Challis and G9B also produced the activity, but 10 other Streptococcus sanguis strains did not. The activity was also produced by Streptococcus faecium 9790. A tetracycline resistance (Tc) determinant present in S. faecalis RC73 was not associated with pAM373 but served as a useful marker in efforts to identify pAM373 among other plasmids present in the strain. Analyses of the Tc determinant showed that it was located on a conjugative transposon very similar to Tn916. Designated Tn918, the transposon could insert into pAM373 as well as into two other hemolysin plasmids. Whereas pAM373 derivatives transferred very well between strains of Streptococcus faecalis, the plasmid would not establish in Staphylococcus aureus or Streptococcus sanguis. However, a derivative of pAM373 carrying Tn918 proved to be a useful delivery vehicle for generating transposon insertions into multiple sites on the staphylococcal chromosome.

Comparative sequence and functional analysis of pT181 and pC221, cognate plasmid replicons from Staphylococcus aureus

The nucleotide sequence of pC221, a 4.6 kb Staphylococcus aureus plasmid is presented. The replication region of the plasmid is identified and compared with the corresponding region of pT181, a compatible but related plasmid. Both plasmids encode trans-active replicon-specific initiator proteins, RepC for pT181 and RepD for pC221. Plasmid replication rate is controlled by regulation of the rate of synthesis of the initiator protein by means of inhibitory 5' countertranscripts. Key elements of the control system are closely conserved between the two plasmids whereas less critical elements show extensive divergence. Overall architecture is also conserved, suggesting functional parallelism. The replication origin for both plasmids is contained within the N-terminal region of the initiator protein coding sequence; the two coding sequences are highly homologous but have two important areas of divergence, one within the origin region, the other near the C-terminus. In vivo recombinants between the two plasmids isolated previously (Iordanescu 1979) have crossover points within the initiator gene, between the two divergent regions. The recombinant plasmids have hybrid initiator proteins and are defective for replication, requiring the simultaneous presence of the parental plasmid from which their origin is derived. They are able to complement replication-defective mutants of the other parental plasmid, suggesting that the recognition specificity of the hybrid initiator protein resides in its C-terminal end and that the specific recognition site for the protein corresponds to the divergent region within the origin.

A physical and functional analysis of Tn917, a Streptococcus transposon in the Tn3 family that functions in Bacillus

The erythromycin-resistance (Emr)-conferring transposon Tn917, first isolated in the genus Streptococcus, has in previous work been shown to function efficiently in the spore-forming species Bacillus subtilis, where it has been developed as a tool for identifying and studying sporulation genes. In the present work, a physical analysis of Tn917 was undertaken, including detailed restriction mapping, chemical DNA sequencing, heteroduplex studies, and Southern hybridization analysis, as a first step in understanding the genetic organization of this useful insertion element. The location and transcriptional orientation of the transposon-borne erm gene (the gene responsible for the Emr phenotype) have been determined, and a partial sequence of DNA 5' to the coding sequence of this gene indicates that its inducibility is probably the result of "translational attenuation," a mechanism known to be responsible for the regulation of at least two other gram-positive erm genes. Restriction mapping and heteroduplex analysis have revealed extensive homology between Tn917 and the Staphylococcus transposon Tn551, throughout virtually their entire lengths, and DNA sequencing studies have revealed a remarkably high degree of sequence correspondence within the terminal inverted repeats of Tn917, Tn551 and the gram-negative transposon Tn3. Tn917 was also shown to generate a 5-bp duplication upon insertion, as do Tn3 and Tn551 (and all of the other Tn3-related elements studied thus far), strengthening the conclusion that these three transposons are members of a highly dispersed family of related insertion elements which populate both gram-positive and gram-negative genera.

Staphylococcal enterotoxin A gene is associated with a variable genetic element

The genetic determinant of Staphylococcus aureus enterotoxin A (SEA) has been cloned in pBR322 in Escherichia coli and found to be expressed and secreted into the periplasmic space in that organism. The SEA gene (entA) is within a 2.5-kilobase-pair HindIII fragment that is part of a discrete genetic element 8-12 kilobase pairs in length. This entA element has a standard chromosomal location [between the purine (pur) and isoleucine-valine (ilv) markers] in most S. aureus strains. In some strains it is unlinked to pur-ilv. However, its internal structure is conserved at different locations. Some naturally occurring SEA-nonproducer (EntA-) strains lack the entire entA element, and one instance of its spontaneous loss is reported. Other naturally occurring strains have EntA- structural variants of the element at the same pur-ilv location at which the intact element is most commonly found. Some of these strains are EntA-, others are EntA+; the latter have a second, unlinked copy of the element containing their functional entA gene. These results suggest that entA is associated with a structurally unstable, possibly mobile, discrete genetic element.

Reciprocal intrapool variation in plasmid copy numbers: a characteristic of segregational incompatibility

An experimental analysis of the concept that incompatible plasmids occupy a common intracellular pool from which copies are drawn at random for replication and assortment is presented. Intrapool variations in an incompatible heteroplasmid strain are inevitable and it is shown that these variations can be exploited by differential selection to amplify one plasmid at the expense of the other. Constant overall copy number is demonstrated for isogenic wild-type replicons and also for isogenic copy mutants whose copy numbers are so great that segregational incompatibility cannot be measured. In the test system used, that of the Staphylococcus aureus plasmid pT181, the rate of replication is probably determined by the availability of a trans-active initiator protein, RepC. In heteroplasmid strains containing wild-type and dominant copy mutant plasmids, although intrapool variation occurs, the total copy number is not constant but varies as a consequence of selection for or against the mutant plasmid. This is because all of the RepC is synthesized from the mutant plasmid (the wild-type is hyper-repressed) and therefore the selection affects the supply of RepC at the same time that it affects the copy number of the plasmid. None of these effects are seen with single plasmids or with compatible pairs.

Complete nucleotide sequence of pT181, a tetracycline-resistance plasmid from Staphylococcus aureus

pT181 is a naturally occurring Staphylococcus aureus plasmid, encoding inducible resistance to tetracycline. The plasmid has a copy number of about 20 per cell, and belongs to the incompatibility group inc3. The complete nucleotide sequence of pT181 has been determined and consists of 4437 bp. The nucleotide sequence contains 69.8% A-T and 30.2% G-C pairs. pT181 was found to contain four open reading frames capable of coding for polypeptides containing more than 50 amino acids. All the putative polypeptides are coded by one strand. The molecular weights of the four putative polypeptides are (in daltons): A, 37,500; B, 35,000; C, 23,000, and D, 18,000. Polypeptide A corresponds to the repC protein, earlier shown to be specifically required for pT181 replication. Polypeptide B (and possibly polypeptide D) are involved in tetracycline resistance. No role has yet been established for polypeptide C; deletion of the coding sequence for the C polypeptide has no detectable effect on any property of the pT181 plasmid. A region consisting of about 1200 bp contains information for the replication and copy number control of this plasmid. The sequencing results are discussed in relation to the replication properties and tetracycline resistance associated with the pT181 plasmid.

Aminocyclitol resistance in Staphylococcus aureus: presence of plasmids and aminocyclitol-modifying enzymes

Aminocyclitol resistance in Staphylococcus aureus has been investigated by the analysis of the plasmids and aminocyclitol-modifying enzymes present in several clinical staphylococcal isolates. All of the strains tested were resistant to a broad range of aminocyclitols and contained large plasmids which encoded a variety of aminocyclitol-modifying enzymes in addition to other antibiotic resistances. All strains expressed multiple aminocyclitol-modifying enzymes. The plasmids present in these strains appear to be related by virtue of their similar restriction endonuclease digestion patterns. The plasmids are related and differ by the gain or loss of small DNA segments, one of which encodes erythromycin and kanamycin resistance.

Determination of plasmid copy number by fluorescence densitometry

A simple and reliable method for the determination of plasmid copy numbers by direct fluorescence densitometry of ethidium bromide-stained electrophoretic gels was developed. In developing the method, the following parameters were evaluated and controlled: plasmid DNA trapping in the linear chromosomal DNA, staining-destaining kinetics for ethidium bromide, linearity of the fluorescence response, and the effect of the molecular topology of DNA on ethidium bromide binding to DNA in agarose.

Chloramphenicol acetyltransferase: enzymology and molecular biology

Naturally occurring chloramphenicol resistance in bacteria is normally due to the presence of the antibiotic inactivating enzyme chloramphenicol acetyltransferase (CAT) which catalyzes the acetyl-S-CoA-dependent acetylation of chloramphenicol at the 3-hydroxyl group. The product 3-acetoxy chloramphenicol does not bind to bacterial ribosomes and is not an inhibitor of peptidyltransferase. The synthesis of CAT is constitutive in E. coli and other Gram-negative bacteria which harbor plasmids bearing the structural gene for the enzyme, whereas Gram-positive bacteria such as staphylococci and streptococci synthesize CAT only in the presence of chloramphenicol and related compounds, especially those with the same stereochemistry of the parent compound and which lack antibiotic activity and a site of acetylation (3-deoxychloramphenicol). Studies of the primary structures of CAT variants suggest a marked degree of heterogeneity but conservation of amino acid sequence at and near the putative active site. All CAT variants are tetramers composed in each case of identical polypeptide subunits consisting of approximately 220 amino acids. The catalytic mechanism does not appear to involve an acyl-enzyme intermediate although one or more cysteine residues are protected from thiol reeagents by substrates. A highly reactive histidine residue has been implicated in the catalytic mechanism.

Functional origin of replication of pT181 plasmid DNA is contained within a 168-base-pair segment

We have used a recently developed in vitro replication system from Staphylococcus aureus to determine the origin and direction of replication of pT181 plasmid DNA. The origin was located to within 168 base pairs by two methods: (i) sequential labeling of restriction endonuclease fragments after synchronous initiation in vitro in the presence of various amounts of dideoxy-TTP and (ii) by constructing in vitro deletions of pT181 DNA close to the origin of replication and testing for their ability to replicate in vitro pT181 plasmid was found to replicate unidirectionally and anticlockwise, as the map is conventionally drawn. The nucleotide sequence of the region containing the origin of replication has been determined and found to be partially or entirely contained within the coding sequence for the repC protein, which is uniquely required for pT181 plasmid replication. Preliminary evidence suggesting that pT181 replicates by a rolling circle mechanism is discussed.

Coding sequence for the pT181 repC product: a plasmid-coded protein uniquely required for replication

pT181 is a 4.4-kilobase plasmid from Staphylococcus aureus specifying tetracycline resistance and present in about 20 copies per cell. The existence of a diffusible pT181 product required for plasmid replication has been proposed on the basis of trans-complementable thermosensitive mutants defective in plasmid maintenance (phenotype Tsr). In this report, the Tsr mutants are shown to have primary replication defects, and the genetic complementation data are confirmed biochemically. All of five mutations are in a single cistron, the repC cistron; interruption of the plasmid DNA molecule at any of three neighboring restriction sites inactivates repC function. Analysis of the DNA sequence in this region reveals an open reading frame of 939 base pairs which encodes the repC product, a 313-amino acid protein. pT181 replication has been demonstrated in cell-free extracts to require specifically a pT181-coded protein of approximately the same size, and it is proposed that this protein is, indeed, the repC product. Preliminary evidence is discussed suggesting that the pT181 replication rate is controlled at the level of synthesis of the repC protein.

Structural analysis of plasmid pSN2 in Staphylococcus aureus: no involvement in enterotoxin B production

Earlier studies have suggested the involvement of a small 1.3-kilobase plasmid, pSN2, in the production of enterotoxin D by certain Staphylococcus aureus strains. On the basis of extensive biochemical studies on pSN2, including the determination of its coding properties and its primary nucleotide sequence, we conclude that this plasmid is not in act involved in enterotoxin B production in S. aureus: although the toxin genes are apparently chromosomal, it is probable that they are part of a special genetic system such as a hitchhiking transposon.

Replication of plasmid pT181 DNA in vitro: requirement for a plasmid-encoded product

PT181 is a naturally occurring 4.5-kilobase Staphylococcus aureus plasmid encoding resistance to tetracycline. The plasmid has a copy number of about 20 per cell; a mutant, cop-608, that has a copy number of 800-1000 has been isolated. A cell-free extract has been developed that carries out complete replication of this plasmid. Extracts made from a strain containing the mutant have much greater replication activity than do extracts of strains containing pT181. In an extract from which endogenous DNA has been removed, DNA synthesis is dependent upon the addition of exogenous plasmid DNA. The replication system is specific for pT181 and related plasmids but it is inactive with other S. aureus plasmids. Furthermore, pT181 DNA does not replicate in extracts made from plasmid-negative strains or strains containing other plasmids. The results suggest that a specific plasmid-encoded substance is required for the replication of pT181 DNA.

Genetic transformation of Streptococcus pneumoniae by heterologous plasmid deoxyribonucleic acid

A number of heterologous plasmid deoxyribonucleic acids (DNAs) coding for erythromycin, tylosin, lincomycin, tetracycline, or chloramphenicol resistance have been introduced into Streptococcus pneumoniae via genetic transformation with frequencies that varied between 10(-5) to as high as 5 x 10(-1) per colony-forming unit. Transformation with plasmid DNA required pneumococcal competence, was competed by chromosomal DNA, and showed a saturation at about 0.5 micrograms/ml (with a recipient population of 3 x 10(7) colony-forming units of competent cells per ml). Plasmid transformation did not occur with a recipient strain, 410, defective in endonuclease I activity and in chromosomal genetic transformation. All erythromycin-resistant transformants examined contained covalently closed circular DNA with the same electrophoretic mobility on agarose gels as the donor DNAs, and when examined in detail the plasmid reisolated from the transformants had the same restriction patterns and the same specific transforming activity as the donor DNA. In the cases of two plasmids examined in detail--pAM77 and pSA5700 Lc9--most of the transforming activity was associated with DNA monomers; DNA multimers present in pSA5700 Lc9 also had biological activity. An unexpected finding was the demonstration of transformation (2 x 10(-5) per colony-forming unit) with plasmid DNAs linearized by treatment with S1 nuclease or with restriction endonucleases.

Identification of a chromosomal determinant of alpha-toxin production in Staphylococcus aureus

Production of alpha-toxin (the Hla+ phenotype, controlled by the Hla gene and scored as alpha-hemolytic activity) is a property of some isolates of Staphylococcus aureus NCTC 8325 and not of others. Genetic transformation between strains differing in the Hla phenotype revealed that the hla+ gene resides in the following sequence: purB110-bla+-hla+-ilv-129-pig-131; previously, the enterotoxin A (entA) gene of strain S-6 was shown to map very close to hla+. The hla+ mutations occurring naturally in strain Ps6 and after various mutagenic treatments in strains 8325 and 233 also mapped between bla+ and ilv-129. Among the isolates of strain 8325, the Hla+ phenotype was always associated with fibrinolytic activity, whereas Hla- isolates were non-fibrinolytic. This relationship was also observed among transformants selected for their Hla+ or Hla- phenotypes. The failure of Hla- strains and mutants to revert to hla+ at detectable frequencies, the instability of the Hla+ phenotype, and the previously observed pattern of recombination of the hla+ and entA+ determinants lend support to the view that hla+ may reside on a transposon; according to this view, Hla- mutants have lost the hla+-bearing transposon. It remains unclear whether hla+ is the structural gene for alpha-toxin.

Physical mapping of Staphylococcus aureus penicillinase plasmid pI524: characterization of an invertible region

The staphylococcal penicillinase plasmid pI524 and a series of derivatives have been extensively mapped by restriction endonuclease digestion and by heteroduplex analysis. We report here the identification of a 2.2 kb region that undergoes a reversible, rec-independent inversion. This sequence is bounded by a pair of inverted repeats 650 base pairs in length, and has asymmetrically located recognition sites for at least three restriction endonucleases. A series of deleted derivatives and one naturally occurring, closely related plasmid, were studied. Two of these retain the inversion; the remainder are incapable of inverting and were all found to be locked in the same orientation of the inversion. The invertible sequence is adjacent to the region of the plasmid encoding beta-lactamase (bla); this entire region appears to be transposable and the inversion may be involved in the regulation of beta-lactamase expression or in translocation.