Matrix-driven formation of mesenchymal stem cell-extracellular matrix microtissues on soft alginate hydrogels

Effects of hypergravity on the angiogenic potential of endothelial cells

Angiogenesis, the formation of blood vessels from pre-existing ones, is a key event in pathology, including cancer progression, but also in homeostasis and regeneration. As the phenotype of endothelial cells (ECs) is continuously regulated by local biomechanical forces, studying endothelial behaviour in altered gravity might contribute to new insights towards angiogenesis modulation. This study aimed at characterizing EC behaviour after hypergravity exposure (more than 1g), with special focus on cytoskeleton architecture and capillary-like structure formation. Herein, human umbilical vein ECs (HUVECs) were cultured under two-dimensional and three-dimensional conditions at 3g and 10g for 4 and 16 h inside the large diameter centrifuge at the European Space Research and Technology Centre (ESTEC) of the European Space Agency. Although no significant tendency regarding cytoskeleton organization was observed for cells exposed to high g's, a slight loss of the perinuclear localization of β-tubulin was observed for cells exposed to 3g with less pronounced peripheral bodies of actin when compared with 1g control cells. Additionally, hypergravity exposure decreased the assembly of HUVECs into capillary-like structures, with a 10g level significantly reducing their organization capacity. In conclusion, short-term hypergravity seems to affect EC phenotype and their angiogenic potential in a time and g-level-dependent manner.

Alginate hydrogels of varied molecular weight distribution enable sustained release of sphingosine-1-phosphate and promote angiogenesis

Alginate hydrogels have been widely validated for controlled release of growth factors and cytokines, but studies exploring sustained release of small hydrophobic lipids are lacking. Sphingosine-1-phosphate (S1P), a bioactive lipid, is an appealing small molecule for inducing blood vessel formation in the context of ischemic conditions. However, there are numerous biological and engineering challenges associated with designing biomaterial systems for controlled release of this lipid. Thus, the objective of this study was to design an injectable, alginate hydrogel formulation that provides controlled release of S1P to establish locally sustained concentration gradients that promote neovascularization. Herein, we varied the molecular weight distribution of alginate polymers within the hydrogel to alter the resultant mechanical properties in a manner that provides control over S1P release. With increasing high molecular weight (HMW) content, the hydrogels exhibited stiffer material properties and released S1P at slower rates. Accordingly, S1P released from hydrogels with 100% HMW content led to enhanced directed migration of outgrowth endothelial cells and blood vessel development assessed using a chick chorioallantoic membrane assay as compared to hydrogels with less HMW content. Overall, this study describes how alginate hydrogels of varied molecular weight may be used to control S1P release kinetics for therapeutic applications. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 138-146, 2018.

Alginate-Chitosan Hydrogels Provide a Sustained Gradient of Sphingosine-1-Phosphate for Therapeutic Angiogenesis

Sphingosine-1-phosphate (S1P), a bioactive lipid, is a potent candidate for treatment of ischemic vascular disease. However, designing biomaterial systems for the controlled release of S1P to achieve therapeutic angiogenesis presents both biological and engineering challenges. Thus, the objective of this study was to design a hydrogel system that provides controlled and sustained release of S1P to establish local concentration gradients that promote neovascularization. Alginate hydrogels have been extensively studied and characterized for delivery of proangiogenic factors. We sought to explore if chitosan (0, 0.1, 0.5, or 1%) incorporation could be used as a means to control S1P release from alginate hydrogels. With increasing chitosan incorporation, hydrogels exhibited significantly denser pore structure and stiffer material properties. While 0.1 and 0.5% chitosan gels demonstrated slower respective release of S1P, release from 1% chitosan gels was similar to alginate gels alone. Furthermore, 0.5% chitosan gels induced greater sprouting and directed migration of outgrowth endothelial cells (OECs) in response to released S1P under hypoxia in vitro. Overall, this report presents a platform for a novel alginate-chitosan hydrogel of controlled composition and in situ gelation properties that can be used to control lipid release for therapeutic applications.

Embryonically inspired scaffolds regulate tenogenically differentiating cells

Tendon injuries heal as scar tissue with significant dysfunction and propensity to re-injure, motivating efforts to develop stem cell-based therapies for tendon regeneration. For these therapies to succeed, effective cues to guide tenogenesis are needed. Our aim is to identify these cues within the embryonic tendon microenvironment. We recently demonstrated embryonic tendon elastic modulus increases during development and is substantially lower than in adult. Here, we examined how these embryonic mechanical properties influence tenogenically differentiating cells, by culturing embryonic tendon progenitor cells (TPCs) within alginate gel scaffolds fabricated with embryonic tendon mechanical properties. We showed that nano- and microscale moduli of RGD-functionalized alginate gels can be tailored to that of embryonic tendons by adjusting polymer concentration and crosslink density. These gels differentially regulated morphology of encapsulated TPCs as a function of initial elastic modulus. Additionally, higher initial elastic moduli elicited higher mRNA levels of scleraxis and collagen type XII but lower levels of collagen type I, whereas late tendon markers tenomodulin and collagen type III were unaffected. Our results demonstrate the potential to engineer scaffolds with embryonic mechanical properties and to use these scaffolds to regulate the behavior of tenogenically differentiating cells.

A 3D in vitro model to explore the inter-conversion between epithelial and mesenchymal states during EMT and its reversion

Epithelial-to-mesenchymal transitions (EMT) are strongly implicated in cancer dissemination. Intermediate states, arising from inter-conversion between epithelial (E) and mesenchymal (M) states, are characterized by phenotypic heterogeneity combining E and M features and increased plasticity. Hybrid EMT states are highly relevant in metastatic contexts, but have been largely neglected, partially due to the lack of physiologically-relevant 3D platforms to study them. Here we propose a new in vitro model, combining mammary E cells with a bioengineered 3D matrix, to explore phenotypic and functional properties of cells in transition between E and M states. Optimized alginate-based 3D matrices provided adequate 3D microenvironments, where normal epithelial morphogenesis was recapitulated, with formation of acini-like structures, similar to those found in native mammary tissue. TGFβ1-driven EMT in 3D could be successfully promoted, generating M-like cells. TGFβ1 removal resulted in phenotypic switching to an intermediate state (RE cells), a hybrid cell population expressing both E and M markers at gene/protein levels. RE cells exhibited increased proliferative/clonogenic activity, as compared to M cells, being able to form large colonies containing cells with front-back polarity, suggesting a more aggressive phenotype. Our 3D model provides a powerful tool to investigate the role of the microenvironment on metastable EMT stages.

Improving the Growth Rate of Human Adipose-Derived Mesenchymal Stem Cells in Alginate/Gelatin Versus Alginate Hydrogels

BACKGROUND

Expansion and differentiation of stem cells relies on the soluble materials as well as the physical conditions of their microenvironment. Several methods have been studied in attempt to enhance the growth and differentiation rates of different adult stem cells extracted from different sources.

OBJECTIVES

The purpose was to improve the three-dimensional (3D) culture condition of the semi-permeable polymeric beads for encapsulation of the human adipose-derived mesenchymal stem cells (hADSCs) by modifying the ratio of the alginate-gelatin composition.

MATERIALS AND METHODS

Following isolation and characterization of hADSCs by flow cytometry and their functional differentiation, encapsulation in the alginate and alginate/gelatin compositions were performed. Moreover, the stability, swelling, size frequency, growth kinetics, and cytotoxicity of the beads were measured to meet proper condition in the designed experimental and control culture conditions. Finally, the growth rates of the cells in different experimental groups and control were measured and analyzed statistically.

RESULTS

Viability decreased in 2 and 3 percent alginate once compared to 1% alginate in beads (p≤0.05). Moreover swelling of the beads in the alginate/gelatin compositions (50:50 and 70:30) were higher than the pure alginate beads (p≤0.05). Finally, the cell growth rate in alginate/gelatin (50:50) beads was significantly higher than alginate and alginate/gelatin (70:30) beads (p≤0.05).

CONCLUSIONS

These findings suggested for the first time that the composite of alginate/gelatin beads with the ratio of 50:50 might provide a suitable culture condition for the encapsulation and in vitro expansion of the hADSCs.

Bioengineered cell-instructive 3D matrices as vehicles for cellular therapies

The delivery of cells, namely of stem cells, from biomaterial-based vehicles has been used to promote and accelerate functional tissue regeneration. Carrier materials can transport and localize cells into target sites, increase their survival and engraftment, and provide a supportive matrix to assist cellular assembly into a newly formed tissue. Hydrogels are amongst the most widely used carrier materials, as they can entrap and protect cells within a real three-dimensional (3D) microenvironment, and intrinsically present many structural properties of the natural extracellular matrix (ECM). To recreate important features of the native ECM, hydrogels may be bio-functionalized with specific cell-instructive moieties for improved biomimetic properties. The biophysical properties of hydrogels can also be tuned, increasing their versatility, as it is currently recognized that stem cells respond to their biomechanical environment. Here, an overview of some strategies commonly employed in the preparation of biomimetic matrices is presented, using alginate as a model hydrogel.

Microfluidic generation of alginate microgels for the controlled delivery of lentivectors

Microgels fabricated through distinct microfluidic procedures encapsulate and release functioning lentivectors in a controlled manner.

Regulation of mesenchymal stem cell 3D microenvironment: From macro to microfluidic bioreactors

Human mesenchymal stem cells (hMSCs) have emerged as an important cell type in cell therapy and tissue engineering. In these applications, maintaining the therapeutic properties of hMSCs requires tight control of the culture environments and the structural cell organizations. Bioreactor systems are essential tools to achieve these goals in the clinical-scale expansion and tissue engineering applications. This review summarizes how different bioreactors provide cues to regulate the structure and the chemico-mechanical microenvironment of hMSCs with a focus on 3D organization. In addition to conventional bioreactors, recent advances in microfluidic bioreactors as a novel approach to better control the hMSC microenvironment are also discussed. These advancements highlight the key role of bioreactor systems in preserving hMSC's functional properties by providing dynamic and temporal regulation of in vitro cellular microenvironment.

Extracellular environment contribution to astrogliosis-lessons learned from a tissue engineered 3D model of the glial scar

Glial scars are widely seen as a (bio)mechanical barrier to central nervous system regeneration. Due to the lack of a screening platform, which could allow in-vitro testing of several variables simultaneously, up to now no comprehensive study has addressed and clarified how different lesion microenvironment properties affect astrogliosis. Using astrocytes cultured in alginate gels and meningeal fibroblast conditioned medium, we have built a simple and reproducible 3D culture system of astrogliosis mimicking many features of the glial scar. Cells in this 3D culture model behave similarly to scar astrocytes, showing changes in gene expression (e.g., GFAP) and increased extra-cellular matrix production (chondroitin 4 sulfate and collagen), inhibiting neuronal outgrowth. This behavior being influenced by the hydrogel network properties. Astrocytic reactivity was found to be dependent on RhoA activity, and targeting RhoA using shRNA-mediated lentivirus reduced astrocytic reactivity. Further, we have shown that chemical inhibition of RhoA with ibuprofen or indirectly targeting RhoA by the induction of extracellular matrix composition modification with chondroitinase ABC, can diminish astrogliosis. Besides presenting the extracellular matrix as a key modulator of astrogliosis, this simple, controlled and reproducible 3D culture system constitutes a good scar-like system and offers great potential in future neurodegenerative mechanism studies, as well as in drug screenings envisaging the development of new therapeutic approaches to minimize the effects of the glial scar in the context of central nervous system disease.

Mechanism of regulation of stem cell differentiation by matrix stiffness

Stem cell behaviors are regulated by multiple microenvironmental cues. As an external signal, mechanical stiffness of the extracellular matrix is capable of governing stem cell fate determination, but how this biophysical cue is translated into intracellular signaling remains elusive. Here, we elucidate mechanisms by which stem cells respond to microenvironmental stiffness through the dynamics of the cytoskeletal network, leading to changes in gene expression via biophysical transduction signaling pathways in two-dimensional culture. Furthermore, a putative rapid shift from original mechanosensing to de novo cell-derived matrix sensing in more physiologically relevant three-dimensional culture is pointed out. A comprehensive understanding of stem cell responses to this stimulus is essential for designing biomaterials that mimic the physiological environment and advancing stem cell-based clinical applications for tissue engineering.

Finding and tracing human MSC in 3D microenvironments with the photoconvertible protein Dendra2

Mesenchymal Stem/Stromal Cells (MSC) are a promising cell type for cell-based therapies - from tissue regeneration to treatment of autoimmune diseases - due to their capacity to migrate to damaged tissues, to differentiate in different lineages and to their immunomodulatory and paracrine properties. Here, a simple and reliable imaging technique was developed to study MSC dynamical behavior in natural and bioengineered 3D matrices. Human MSC were transfected to express a fluorescent photoswitchable protein, Dendra2, which was used to highlight and follow the same group of cells for more than seven days, even if removed from the microscope to the incubator. This strategy provided reliable tracking in 3D microenvironments with different properties, including the hydrogels Matrigel and alginate as well as chitosan porous scaffolds. Comparison of cells mobility within matrices with tuned physicochemical properties revealed that MSC embedded in Matrigel migrated 64% more with 5.2 mg protein/mL than with 9.6 mg/mL and that MSC embedded in RGD-alginate migrated 51% faster with 1% polymer concentration than in 2% RGD-alginate. This platform thus provides a straightforward approach to characterize MSC dynamics in 3D and has applications in the field of stem cell biology and for the development of biomaterials for tissue regeneration.

Biofunctionalized pectin hydrogels as 3D cellular microenvironments

Pectin hydrogels were prepared by internal ionotropic gelation and explored as MSC delivery vehicles.

Influence of the stiffness of three-dimensional alginate/collagen-I interpenetrating networks on fibroblast biology

Wound dressing biomaterials are increasingly being designed to incorporate bioactive molecules to promote healing, but the impact of matrix mechanical properties on the biology of resident cells orchestrating skin repair and regeneration remains to be fully understood. This study investigated whether tuning the stiffness of a model wound dressing biomaterial could control the behavior of dermal fibroblasts. Fully interpenetrating networks (IPNs) of collagen-I and alginate were fabricated to enable gel stiffness to be tuned independently of gel architecture, polymer concentration or adhesion ligand density. Three-dimensional cultures of dermal fibroblasts encapsulated within matrices of different stiffness were shown to promote dramatically different cell morphologies, and enhanced stiffness resulted in upregulation of key-mediators of inflammation such as IL-10 and COX-2. These findings suggest that simply modulating the matrix mechanical properties of a given wound dressing biomaterial deposited at the wound site could regulate the progression of wound healing.