The antiviral action of common household disinfectants and antiseptics against murine hepatitis virus, a potential surrogate for SARS coronavirus

Cationic Antiseptics Facilitate Pore Formation in Model Bacterial Membranes

Antiseptics are an essential line of defense against bacterial and viral infections in modern medical practice. Many of them are supposed to act on microbial membranes. However, the detailed mechanisms of their action are still elusive. Here, we utilized coarse-grained molecular dynamics simulations to investigate interactions of different types of cationic antiseptics (CAs) with a model bacterial membrane. The simulations revealed qualitatively distinct patterns of dynamic and structural alterations of membrane induced by different types of antiseptics although none of them caused disintegration or solubilization of the bilayer even at the highest explored concentration. At the same time, the adsorption of antiseptics rendered membranes more vulnerable to poration under exposure to the external electric field. We further discuss the possible relation of the enhanced pore formation induced by CAs to their cytotoxic action.

Viricidal treatments for prevention of coronavirus infection

Coronavirus disease 2019 (COVID-19), which causes severe acute respiratory syndrome and lung failure, is caused by the novel coronavirus, also known as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Due to high transmission rates from individual to individual, it has progressed to a pandemic. However, indirect transmission from inanimate objects or surfaces that have come in contact with a patient poses an even more significant threat as it is difficult to trace the source of infection in these cases. Therefore, these surfaces and objects require disinfection with chemicals having potent viricidal activity. These include alcohols, aldehydes, quaternary ammonium compounds, chlorhexidine, and chlorine-based disinfectants, among others. They vary in their viricidal activity depending on their structure, concentrations, and mechanism of action. Several studies have looked into these agents and the transmission of the virus related to it. Moreover, certain viricides, if used as constituents of commercially available oral disinfectants, can further aid in preventing ventilator-associated pneumonia and maintain oral hygiene. However, these chemicals are not entirely free of potential hazards. In this review, we have compiled and critically appraised some commonly used viricidal agents in healthcare settings and the role they can play in the prevention of SARS-CoV-2 transmission.

Are Quaternary Ammonium Compounds, the Workhorse Disinfectants, Effective against Severe Acute Respiratory Syndrome-Coronavirus-2?

A novel virus named Severe Acute Respiratory Syndrome-Coronavirus-2 (SARS-CoV-2) emerged from Wuhan, China in late 2019. Since then, the virus has quickly spread worldwide, leading the World Health Organization to declare it as a pandemic; by the end of April 2020, the number of cases exceeded 3 million. Due to the high infectivity rate, SARS-CoV-2 is difficult to contain, making disinfectant protocols vital, especially for essential, highly trafficked areas such as hospitals, grocery stores, and delivery centers. According to the Centers for Disease Control and Prevention, best practices to slow the spread rely on good hand hygiene, including proper handwashing practices as well as the use of alcohol-based hand sanitizers. However, they provide warning against sanitizing products containing benzalkonium chloride (BAC), which has sparked concern in both the scientific community as well as the general public as BAC, a common quaternary ammonium compound (QAC), is ubiquitous in soaps and cleaning wipes as well as hospital sanitation kits. This viewpoint aims to highlight the outdated and incongruous data in the evaluation of BAC against the family of known coronaviruses and points to the need for further evaluation of the efficacy of QACs against coronaviruses.

A New Natural Defense Against Airborne Pathogens

We propose the nasal administration of calcium-enriched physiological salts as a new hygienic intervention with possible therapeutic application as a response to the rapid and tenacious spread of COVID-19. We test the effectiveness of these salts against viral and bacterial pathogens in animals and humans. We find that aerosol administration of these salts to the airways diminishes the exhalation of the small particles that face masks fail to filter and, in the case of an influenza swine model, completely block airborne transmission of disease. In a study of 10 human volunteers (5 less than 65 years and 5 older than 65 years), we show that delivery of a nasal saline comprising calcium and sodium salts quickly (within 15 min) and durably (up to at least 6 h) diminishes exhaled particles from the human airways. Being predominantly smaller than 1 μm, these particles are below the size effectively filtered by conventional masks. The suppression of exhaled droplets by the nasal delivery of calcium-rich saline with aerosol droplet size of around 10 μm suggests the upper airways as a primary source of bioaerosol generation. The suppression effect is especially pronounced (99%) among those who exhale large numbers of particles. In our study, we found this high-particle exhalation group to correlate with advanced age. We argue for a new hygienic practice of nasal cleansing by a calcium-rich saline aerosol, to complement the washing of hands with ordinary soap, use of a face mask, and social distancing.

Coronaviruses widespread on nonliving surfaces: important questions and promising answers

The world is facing, while writing this review, a global pandemic due to one of the types of the coronaviruses (i.e., COVID-19), which is a new virus. Among the most important reasons for the transmission of infection between humans is the presence of this virus active on the surfaces and materials. Here, we addressed important questions such as do coronaviruses remain active on the inanimate surfaces? Do the types of inanimate surfaces affect the activity of coronaviruses? What are the most suitable ingredients that used to inactivate viruses? This review article addressed many of the works that were done in the previous periods on the survival of many viruses from the coronaviruses family on various surfaces such as steel, glass, plastic, Teflon, ceramic tiles, silicon rubber and stainless steel copper alloys, Al surface, sterile sponges, surgical gloves and sterile latex. The impacts of environmental conditions such as temperature and humidity were presented and discussed. The most important active ingredients that can deactivate viruses on the surfaces were reported here. We hope that these active ingredients will have the same effect on COVID-19.

Environmental and decontamination issues for human coronaviruses and their potential surrogates

Pandemic coronavirus disease‐2019 (COVID‐19) gives ample reason to generally review coronavirus (CoV) containment. For establishing some preliminary views on decontamination and disinfection, surrogate CoVs have commonly been assessed. This review serves to examine the existing science in regard to CoV containment generically and then to translate these findings into timely applications for COVID‐19. There is widespread dissemination of CoVs in the immediate patient environment, and CoVs can potentially be spread via respiratory secretions, urine, and stool. Interpretations of the spread however must consider whether studies examine for viral RNA, virus viability by culture, or both. Presymptomatic, asymptomatic, and post‐14 day virus excretion from patients may complicate the epidemiology. Whereas droplet spread is accepted, there continues to be controversy over the extent of possible airborne spread and especially now for severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2). CoVs are stable in body secretions and sewage at reduced temperatures. In addition to temperature, dryness or relative humidity, initial viral burden, concomitant presence of bioburden, and the type of surface can all affect stability. Generalizing, CoVs can be susceptible to radiation, temperature extremes, pH extremes, peroxides, halogens, aldehydes, many solvents, and several alcohols. Whereas detergent surfactants can have some direct activity, these agents are better used as complements to a complex disinfectant solution. Disinfectants with multiple agents and adverse pH are more likely to be best active at higher water temperatures. Real‐life assessments should be encouraged with working dilutions. The use of decontamination and disinfection should be balanced with considerations of patient and caregiver safety. Processes should also be balanced with considerations for other potential pathogens that must be targeted. Given some CoV differences and given that surrogate testing provides experimental correlates at best, direct assessments with SARS‐CoV, Middle East respiratory syndrome‐related coronavirus (MERS‐CoV), and SARS‐CoV‐2 are required.

Environmental spread in the immediate context of infected hosts is common for coronaviruses.

The epidemiology of coronavirus infections is complicated by presymptomatic, asymptomatic, and post‐fourteen day infection spread.

Mechanical removal of associated organic debris is vital to effective coronavirus decontamination.

Proper exposure times for disinfection are vital to effective coronavirus inactivation.

Temperature of disinfectant working dilutions and pH can have impact on antiviral activity.

The immediate patient environment should be simplified for necessary and reusable items.

Coronavirus inactivation should be considered in the context of other pathogens that need to be inactivated simultaneously.

Gas Plasma Technology-An Asset to Healthcare During Viral Pandemics Such as the COVID-19 Crisis?

The COVID-19 crisis profoundly disguised the vulnerability of human societies and healthcare systems in the situation of a pandemic. In many instances, it became evident that the quick and safe reduction of viral load and spread is the foremost principle in the successful management of such a pandemic. However, it became also clear that many of the established routines in healthcare are not always sufficient to cope with the increased demand for decontamination procedures of items, healthcare products, and even infected tissues. For the last 25 years, the use of gas plasma technology has sparked a tremendous amount of literature on its decontaminating properties, especially for heat-labile targets, such as polymers and tissues, where chemical decontamination often is not appropriate. However, while the majority of earlier work focused on bacteria, only relatively few reports are available on the inactivation of viruses. We here aim to provide a perspective for the general audience of the chances and opportunities of gas plasma technology for supporting healthcare during viral pandemics such as the COVID-19 crisis. This includes possible real-world plasma applications, appropriate laboratory viral test systems, and critical points on the technical and safety requirements of gas plasmas for virus inactivation.

Biocides and Novel Antimicrobial Agents for the Mitigation of Coronaviruses

In December, 2019, a highly infectious and rapidly spreading new pneumonia of unknown cause was reported to the Chinese WHO Country Office. A cluster of these cases had appeared in Wuhan, a city in the Hubei Province of China. These infections were found to be caused by a new coronavirus which was given the name "2019 novel coronavirus" (2019-nCoV). It was later renamed "severe acute respiratory syndrome coronavirus 2," or SARS-CoV-2 by the International Committee on Taxonomy of Viruses on February 11, 2020. It was named SARS-CoV-2 due to its close genetic similarity to the coronavirus which caused the SARS outbreak in 2002 (SARS-CoV-1). The aim of this review is to provide information, primarily to the food industry, regarding a range of biocides effective in eliminating or reducing the presence of coronaviruses from fomites, skin, oral/nasal mucosa, air, and food contact surfaces. As several EPA approved sanitizers against SARS-CoV-2 are commonly used by food processors, these compounds are primarily discussed as much of the industry already has them on site and is familiar with their application and use. Specifically, we focused on the effects of alcohols, povidone iodine, quaternary ammonium compounds, hydrogen peroxide, sodium hypochlorite (NaOCl), peroxyacetic acid (PAA), chlorine dioxide, ozone, ultraviolet light, metals, and plant-based antimicrobials. This review highlights the differences in the resistance or susceptibility of different strains of coronaviruses, or similar viruses, to these antimicrobial agents.

Features of enteric disease from human coronaviruses: Implications for COVID-19

Coronaviruses have long been studied in both human and veterinary fields. Whereas the initial detection of endemic human respiratory coronaviruses was problematic, detection of these and newly discovered human coronaviruses has been greatly facilitated with major advances in the laboratory. Nevertheless, technological factors can affect the accuracy and timeliness of virus detection. Many human coronaviruses can be variably found in stool samples. All human coronaviruses have been variably associated with symptoms of gastroenteritis. Coronaviruses can occasionally be cultured from enteric specimens, but most detection is accomplished with genetic amplification technologies. Excretion of viral RNA in stool can extend for a prolonged period. Culture‐positive stool samples have been found to exceed a fourteen day period after onset of infection for some coronaviruses. Virus can also sometimes be cultured from patients' respiratory samples during the late incubation period. Relatively asymptomatic patients may excrete virus. Both viable and nonviable virus can be found in the immediate environment of the patient, the health care worker, and less often the public. These lessons from the past study of animal and human coronaviruses can be extended to presumptions for severe acute respiratory syndrome coronavirus 2. Already, the early reports from the coronavirus disease‐2019 pandemic are confirming some concerns. These data have the cumulative potential to cause us to rethink some current and common public health and infection control strategies.

coronaviruses are variably found in human enteric samples during the course of infection.

abdominal and intestinal illnesses are associated with coronavirus infections.

enteric excretion of live virus and viral RNA have been confirmed.

occasionally, live virus can be found in stool samples to exceed a fourteen day period after disease onset, and virus can also be cultured from these samples during the late incubation period or from asymptomatic individuals.

Sanitizing agents for virus inactivation and disinfection

Viral epidemics develop from the emergence of new variants of infectious viruses. The lack of effective antiviral treatments for the new viral infections coupled with rapid community spread of the infection often result in major human and financial loss. Viral transmissions can occur via close human-to-human contact or via contacting a contaminated surface. Thus, careful disinfection or sanitization is essential to curtail viral spread. A myriad of disinfectants/sanitizing agents/biocidal agents are available that can inactivate viruses, but their effectiveness is dependent upon many factors such as concentration of agent, reaction time, temperature, and organic load. In this work, we review common commercially available disinfectants agents available on the market and evaluate their effectiveness under various application conditions. In addition, this work also seeks to debunk common myths about viral inactivation and highlight new exciting advances in the development of potential sanitizing agents.

Repurposing Quaternary Ammonium Compounds as Potential Treatments for COVID-19

The COVID-19 pandemic has highlighted an important role for drug repurposing. Quaternary ammonium compounds such as ammonium chloride, cetylpyridinium and miramistin represent widely accessible antiseptic molecules with well-known broad-spectrum antiviral activities and represent a repurposing opportunity as therapeutics against SARS-CoV-2.

Persistence of coronaviruses on inanimate surfaces and their inactivation with biocidal agents

Currently, the emergence of a novel human coronavirus, SARS-CoV-2, has become a global health concern causing severe respiratory tract infections in humans. Human-to-human transmissions have been described with incubation times between 2-10 days, facilitating its spread via droplets, contaminated hands or surfaces. We therefore reviewed the literature on all available information about the persistence of human and veterinary coronaviruses on inanimate surfaces as well as inactivation strategies with biocidal agents used for chemical disinfection, e.g. in healthcare facilities. The analysis of 22 studies reveals that human coronaviruses such as Severe Acute Respiratory Syndrome (SARS) coronavirus, Middle East Respiratory Syndrome (MERS) coronavirus or endemic human coronaviruses (HCoV) can persist on inanimate surfaces like metal, glass or plastic for up to 9 days, but can be efficiently inactivated by surface disinfection procedures with 62-71% ethanol, 0.5% hydrogen peroxide or 0.1% sodium hypochlorite within 1 minute. Other biocidal agents such as 0.05-0.2% benzalkonium chloride or 0.02% chlorhexidine digluconate are less effective. As no specific therapies are available for SARS-CoV-2, early containment and prevention of further spread will be crucial to stop the ongoing outbreak and to control this novel infectious thread.

Triclosan: antimicrobial mechanisms, antibiotics interactions, clinical applications, and human health

The large-scale applications of Triclosan in industrial and household products have created many health and environmental concerns. Despite the fears of its drug-resistance and other issues, Triclosan is still an effective drug against many infectious organisms. Knowing the cross-interactions of Triclosan with different antibiotics, bacteria, and humans can provide much-needed information for the risk assessment of this drug. We review the current understanding of the antimicrobial mechanisms of Triclosan, how microbes become resistant to Triclosan, and the synergistic and antagonistic effects of Triclosan with different antibiotics. Current literature on the clinical applications of Triclosan and its effect on fetus/child development are also summarized.

Formation of dioxins from triclosan with active chlorine: A potential risk assessment

Triclosan, a widely used antimicrobial agent, can increase colitis-associated colon tumorigenesis, and induce liver fibrosis and cancer in mice through mechanisms which may be relevant in humans. In this study, an analytical method using gas chromatography-mass spectrometry (GC-MS) and high resolution gas chromatography-high resolution mass spectrometry (HRGC-HRMS) was developed to measure dioxins and chlorinated derivatives from triclosan in the presence of active chlorine in seawater matrix. Formation yields of dioxins and chlorinated triclosans were assessed at different initial precursor concentrations under dark and UV light irradiation conditions. Results showed that triclosan was rapidly transformed to its chlorinated derivatives, i.e. tetraclosans and pentaclosans, of which the formation yields peaked after 1 h of reaction. UV light was the key factor to promote the formation of dioxins. With the same initial triclosan/active chlorine ratio, the highest yield of dioxins was observed with lower initial concentrations of triclosan under UV irradiation. Five dioxins, including 2,8-DCDD, 1,2,8-TrCDD, 2,3,7-TrCDD, 1,2,3,8-TeCDD, and 2,3,7,8-TeCDD, were identified and quantified. 2,3,7,8-TeCDD, the most toxic dioxin, was firstly reported as the photo-transformation product of triclosan in aquatic solution. Results presented here are useful for a comprehensive understanding of the fate and toxicity of triclosan in contaminated waters.

Triclosan and triclocarban exposure, infectious disease symptoms and antibiotic prescription in infants-A community-based randomized intervention

Background

Triclosan and triclocarban (TCs) are broad-spectrum antimicrobials that, until recently, were found in a wide variety of household and personal wash products. Popular with consumers, TCs have not been shown to protect against infectious diseases.

Objectives

To determine whether use of TC-containing wash products reduces incidence of infection in children less than one year of age.

Methods

Starting in 2011, we nested a randomized intervention of wash products with and without TCs within a multiethnic birth cohort. Maternal reports of infectious disease symptoms and antibiotic use were collected weekly by automated survey; household visits occurred every four months. Antibiotic prescriptions were identified by medical chart review. Urinary triclosan levels were measured in a participant subset. Differences by intervention group in reported infectious disease (primary outcome) and antibiotic use (secondary outcome) were assessed using mixed effects logistic regression and Fisher’s Exact tests, respectively.

Results

Infectious illness occurred in 6% of weeks, with upper respiratory illness the predominant syndrome. Among 60 (45%) TC-exposed and 73 (55%) non-TC-exposed babies, infectious disease reports did not differ in frequency between groups (likelihood ratio test: p = 0.88). Medical visits with antibiotic prescriptions were less common in the TC group than in the non-TC group (7.8% vs. 16.6%, respectively; p = 0.02).

Conclusions

Although randomization to TC-containing wash products was not associated with decreased infectious disease reports by mothers, TCs were associated with decreased antibiotic prescriptions, suggesting a benefit against bacterial infection. The recent removal of TCs from consumer wash products makes further elucidation of benefits and risks impracticable.

Developing Novel Antimicrobial and Antiviral Textile Products

In conjunction with an increasing public awareness of infectious diseases, the textile industry and scientists are developing hygienic fabrics by the addition of various antimicrobial and antiviral compounds. In the current study, sodium pentaborate pentahydrate and triclosan are applied to cotton fabrics in order to gain antimicrobial and antiviral properties for the first time. The antimicrobial activity of textiles treated with 3 % sodium pentaborate pentahydrate, 0.03 % triclosan, and 7 % Glucapon has been investigated against a broad range of microorganisms including bacteria, yeast, and fungi. Moreover, modified cotton fabrics were tested against adenovirus type 5 and poliovirus type 1. According to the test results, the modified textile goods attained very good antimicrobial and antiviral properties. Thus, the results of the present study clearly suggest that sodium pentaborate pentahydrate and triclosan solution-treated textiles can be considered in the development of antimicrobial and antiviral textile finishes.

Factors in the Selection of Surface Disinfectants for Use in a Laboratory Animal Setting

Because surface disinfectants are an important means of pathogen control within laboratory animal facilities, these products must have an appropriate spectrum of antimicrobial activity. However, many other factors must also be considered, including effects on human health, environmental safety, and animal behavior. Aqueous solutions of sodium hypochlorite often are considered to be the 'gold standard' for surface disinfection, but these products can be corrosive, caustic, and aversive in odor. This study was designed to identify disinfectants that are as effective as hypochlorite solutions but more acceptable for use in a laboratory animal setting. An antiviral disinfectant-efficacy assay was developed by using viral vectors that expressed green fluorescence protein as surrogates for wild-type viruses of concern in laboratory animals. Efficacy testing revealed that most of the products were highly effective when used against viral vectors in suspension. However, when the disinfectants were challenged by buffering virus in protein or drying virus on nonporous surfaces, the hypochlorite and peroxymonosulfate products performed the best. Review of safety data sheets for the agents indicated that a peroxide-based product was considerably safer than the other products tested and that the pH of most products was not conducive to disposal down a drain. Behavioral testing of Swiss Webster, C57Bl/6, and BALB/c mice showed that the hypochlorite- and peroxide-based products were clearly aversive, given that the mice consistently avoided these products. All of these factors must be considered when choosing the appropriate disinfectant.

Inactivation of coxsackievirus B4, feline calicivirus and herpes simplex virus type 1: unexpected virucidal effect of a disinfectant on a non-enveloped virus applied onto a surface

OBJECTIVE

To evaluate the effect of a disinfectant onto viruses in suspension on the one hand and applied onto a surface on the other.

METHODS

A system combining flocked swabs to recover viruses dried onto stainless steel carriers and gel filtration to eliminate cytotoxic products has been developed to study the virucidal effect of a quaternary ammonium-based disinfectant towards herpes simplex virus type 1 (HSV-1), coxsackievirus B4 (CVB4) and feline calicivirus F9 (FCV). The recovery of FCV has been estimated by RT real-time PCR.

RESULTS

HSV-1, CVB4 and FCV had a titer over 10(4) TCID50 · ml(-1) after 2 h drying and were recovered from the carriers using flocked swabs. HSV-1 was inactivated in suspension and on stainless steel carriers by the disinfectant (a reduction factor of 4 and 2.83 log, respectively) whereas CVB4 was resistant. The reduction of infectious titer was moderate, 1.5 log in 30 min, when FCV was in suspension, whereas it was up to 4 log in 10 min when the virus was dried on a carrier. Dried FCV was efficiently recovered from carriers as demonstrated by RT real-time PCR.

CONCLUSION

A non-enveloped virus, FCV, applied on a surface, but not in suspension, was inactivated by a quaternary ammonium-based disinfectant. The resistance of viruses applied onto a surface to the effect of disinfectants should be investigated further.

Human coronaviruses: insights into environmental resistance and its influence on the development of new antiseptic strategies

The Coronaviridae family, an enveloped RNA virus family, and, more particularly, human coronaviruses (HCoV), were historically known to be responsible for a large portion of common colds and other upper respiratory tract infections. HCoV are now known to be involved in more serious respiratory diseases, i.e. bronchitis, bronchiolitis or pneumonia, especially in young children and neonates, elderly people and immunosuppressed patients. They have also been involved in nosocomial viral infections. In 2002–2003, the outbreak of severe acute respiratory syndrome (SARS), due to a newly discovered coronavirus, the SARS-associated coronavirus (SARS-CoV); led to a new awareness of the medical importance of the Coronaviridae family. This pathogen, responsible for an emerging disease in humans, with high risk of fatal outcome; underline the pressing need for new approaches to the management of the infection, and primarily to its prevention. Another interesting feature of coronaviruses is their potential environmental resistance, despite the accepted fragility of enveloped viruses. Indeed, several studies have described the ability of HCoVs (i.e. HCoV 229E, HCoV OC43 (also known as betacoronavirus 1), NL63, HKU1 or SARS-CoV) to survive in different environmental conditions (e.g. temperature and humidity), on different supports found in hospital settings such as aluminum, sterile sponges or latex surgical gloves or in biological fluids. Finally, taking into account the persisting lack of specific antiviral treatments (there is, in fact, no specific treatment available to fight coronaviruses infections), the Coronaviridae specificities (i.e. pathogenicity, potential environmental resistance) make them a challenging model for the development of efficient means of prevention, as an adapted antisepsis-disinfection, to prevent the environmental spread of such infective agents. This review will summarize current knowledge on the capacity of human coronaviruses to survive in the environment and the efficacy of well-known antiseptic-disinfectants against them, with particular focus on the development of new methodologies to evaluate the activity of new antiseptic-disinfectants on viruses.

Survival of influenza A(H1N1) on materials found in households: implications for infection control

Background

The majority of influenza transmission occurs in homes, schools and workplaces, where many frequently touched communal items are situated. However the importance of transmission via fomites is unclear since few data exist on the survival of virus on commonly touched surfaces. We therefore measured the viability over time of two H1N1 influenza strains applied to a variety of materials commonly found in households and workplaces.

Methodology and Principal Findings

Influenza A/PuertoRico/8/34 (PR8) or A/Cambridge/AHO4/2009 (pandemic H1N1) viruses were inoculated onto a wide range of surfaces used in home and work environments, then sampled at set times following incubation at stabilised temperature and humidity. Virus genome was measured by RT-PCR; plaque assay (for PR8) or fluorescent focus formation (for pandemic H1N1) was used to assess the survival of viable virus.

Conclusions/Significance

The genome of either virus could be detected on most surfaces 24 h after application with relatively little drop in copy number, with the exception of unsealed wood surfaces. In contrast, virus viability dropped much more rapidly. Live virus was recovered from most surfaces tested four hours after application and from some non-porous materials after nine hours, but had fallen below the level of detection from all surfaces at 24 h. We conclude that influenza A transmission via fomites is possible but unlikely to occur for long periods after surface contamination (unless re-inoculation occurs). In situations involving a high probability of influenza transmission, our data suggest a hierarchy of priorities for surface decontamination in the multi-surface environments of home and hospitals.

A respiratory syncytial virus isolate enables the testing of virucidal products

The respiratory syncytial virus (RSV) is known as a major cause of respiratory infections and nosocomial diseases. Testing this virus is rather difficult due to the problems encountered in producing it at a high titer without using any purification method. A RSV isolate which replicates to high level on a Hep-2 cell line with an infectious titer of at least 10(7)TCID(50)mL(-1) in culture supernatant fluids has been identified. Thanks to this isolate, the virucidal effects of two products, a hand rub solution and a surface disinfectant, were conveniently tested according to the EN 14476:2007-02 procedure.

Date palm sap collection: exploring opportunities to prevent Nipah transmission

Nipah virus (NiV) infection is a seasonal disease in Bangladesh that coincides with the date palm sap collection season. Raw date palm sap is a delicacy to drink in Bengali culture. If fruit bats that are infected with NiV gain access to the sap for drinking, they might occasionally contaminate the sap through saliva and urine. In February 2007, we conducted a qualitative study in six villages, interviewing 27 date palm sap collectors (gachhis) within the geographical area where NiV outbreaks have occurred since 2001. Gachhis reported that bats pose a challenge to successful collection of quality sap, because bats drink and defecate into the sap which markedly reduces its value. They know some methods to prevent access by bats and other pests but do not use them consistently, because of lack of time and resources. Further studies to explore the effectiveness of these methods and to motivate gachhis to invest their time and money to use them could reduce the risk of human Nipah infection in Bangladesh.