Biomechanical properties of high-toughness double network hydrogels

Composite Films with UV-Barrier Properties Based on Bacterial Cellulose Combined with Chitosan and Poly(vinyl alcohol): Study of Puncture and Water Interaction Properties

The present study describes the preparation and characterization of composite films from bacterial cellulose produced by Komagataeibacter xylinus combined with poly(vinyl alcohol) and chitosan. The unique bacterial cellulose structure provides an expanded surface area with high porosity, easing the combination with other soluble polymers by dipping. This blending method effectively reinforces the bacterial cellulose structure. Toughness, puncture strength, water solubility, and swelling degree were measured to assess the effect of poly(vinyl alcohol) and chitosan on the analyzed properties. The morphology and optical and thermal properties were evaluated by scanning electron microscopy, UV-vis spectral analysis, thermogravimetry, and differential scanning calorimetry, respectively. Results showed that the films have good UV-barrier properties and high thermal stability. Toughness values ranged from 0.26 to 7.18 MJ/m³, burst strength ranged from 58.88 to 3234.62 g, and distance to burst ranged from 0.39 to 3.24 mm. Poly(vinyl alcohol) affected the water solubility and increased the swelling degree.

A strong, tough, and osteoconductive hydroxyapatite mineralized polyacrylamide/dextran hydrogel for bone tissue regeneration

The design of hydrogels with adequate mechanical properties and excellent bioactivity, osteoconductivity, and capacity for osseointegration is essential to bone repair and regeneration. However, it is challenging to integrate all these properties into one bone scaffold. Herein, we developed a strong, tough, osteoconductive hydrogel by a facile one-step micellar copolymerization of acrylamide and urethacrylate dextran (Dex-U), followed by the in situ mineralization of hydroxyapatite (HAp) nanocrystals. We show that the soft, flexible, and hydrophobically associated polyacrylamide (PAAm) network is strengthened by the stiff crosslinked Dex-U phase, and that the mineralized HAp simultaneously improves the mechanical properties and osteoconductivity. The obtained HAp mineralized PAAm/Dex-U hydrogel (HAp-PADH) has extremely high compressive strength (6.5 MPa) and enhanced fracture resistance (over 2300 J m^-2), as compared with pure PAAm hydrogels. In vitro, we show that the mineralized HAp layer promotes the adhesion and proliferation of osteoblasts, and effectively stimulates osteogenic differentiation. Through the in vivo evaluation of hydrogels in a femoral condyle defect rabbit model, we show regeneration of a highly mineralized bone tissue and direct bonding to the HAp-PADH interface. These findings confirm the excellent osteoconductivity and osseointegration ability of fabricated HAp-PADH. The present HAp-PADH, with its superior mechanical properties and excellent osteoconductivity, should have great potential for bone repair and regeneration. STATEMENT OF SIGNIFICANCE: We developed a strong, tough, and osteoconductive hydrogel by a facile one-step micellar copolymerization of acrylamide and urethane methacrylate dextran (Dex-U), followed by the in situ mineralization of hydroxyapatite (HAp) nanocrystals. The hydrophobic micellar copolymerization and introduction of the stiff crosslinked Dex-U phase endowed the soft polyacrylamide (PAAm) network with enhanced strength and toughness. The in situ mineralized HAp nanocrystals on the hydrogels further improved the mechanical properties of the hydrogels and promoted osteogenic differentiation of cells. Mechanical tests together with in vitro and in vivo evaluations confirmed that the HAp mineralized PAAm/Dex-U hydrogel (HAp-PADH) achieved a combination of superior mechanical properties and excellent osseointegration, and thus may offer a promising candidate for bone repair and regeneration.

Micro patterning of hydroxyapatite by soft lithography on hydrogels for selective osteoconduction

Mechanically robust hydrogels are promising biomaterials as artificial supportive tissue. These applications require selective and robust bonding of the hydrogels to living tissue. Recently, we achieved strong in vivo bone bonding of a tough double network (DN) hydrogel, a potential material for use as artificial cartilage and tendon, by hybridizing osteoconductive hydroxyapatite (HAp) in the gel surface layer. In this work, we report micro patterning of HAp at the surface of the DN hydrogel for selective osteoconduction. Utilizing the dissolution of HAp in an acidic environment, the soft lithography technique using an acid gel stamp was adopted to form a high-resolution HAp pattern on the gel. The HAp-patterned gel showed well-regulated migration and adhesion of cells in vitro. Moreover, the HAp-patterned gel showed selective and robust bonding to the rabbit bone tissue in vivo. This HAp soft lithography technique allows for simple and quick preparation of tailor-made osteoconductive hydrogels and can be applied to other hydrogels for selective bone bonding. STATEMENT OF SIGNIFICANCE: Hydrogels, preserving large amount of water, have been studied for next-generation artificial soft tissues. However, fixation of hydrogels to living tissue was unsolved issue for clinical application. Recently, we achieved robust bonding of a tough double network gel to bone in vivo by coating of osteoconductive hydroxyapatite in the gel surface layer. For further progress for practical use, we report the micro patterning of HAp at the surface of the DN hydrogel by using soft lithography technique, to perform selective bonding to only objective area without unnecessary coalescence. The HAp lithography technique is simple, quick and non-toxic method to prepare tailor-made osteoconductive hydrogels and has universality of species of hydrogels.

Dual Physically Cross-Linked κ-Carrageenan-Based Double Network Hydrogels with Superior Self-Healing Performance for Biomedical Application

Chemically linked double network (DN) hydrogels display extraordinary mechanical attributes but mostly suffer from poor self-healing property and unsatisfactory biocompatibility due to the irreversible breaks in their chemical-linked networks and the use of toxic chemical cross-linking agents. To address these limitations, we developed a novel κ-carrageenan/polyacrylamide (KC/PAM) DN hydrogel through a dual physical-cross-linking strategy, with the ductile, hydrophobically associated PAM being the first network, and the rigid potassium ion (K⁺) cross-linked KC being the second network. The dual physically cross-linked DN (DPC-DN) hydrogels with optimized KC concentration exhibit excellent fracture tensile stress (1320 ± 46 kPa) and toughness (fracture energy: 6900 ± 280 kJ/m³), comparable to those fully chemically linked DN hydrogels and physically chemically cross-linked hybrid DN hydrogels. Moreover, because of their unique dual physical-cross-linking structures, the KC/PAM hydrogels also demonstrated rapid self-recovery, remarkable notch-insensitivity, self-healing capability, as well as excellent cytocompatibility toward stem cells. Accordingly, this work presents a new strategy toward fabricating self-repairing DPC-DN hydrogels with outstanding mechanical behaviors and biocompatibility. The new type of DN hydrogels demonstrates strong potentiality in many challenging biomedical applications such as artificial diaphragm, tendon, and cartilage.

Composite Cellularized Structures Created from an Interpenetrating Polymer Network Hydrogel Reinforced by a 3D Woven Scaffold

Biomaterial scaffolds play multiple roles in cartilage tissue engineering, including controlling architecture of newly formed tissue while facilitating growth of embedded cells and simultaneously providing functional properties to withstand the mechanical environment within the native joint. In particular, hydrogels-with high water content and desirable transport properties-while highly conducive to chondrogenesis, often lack functional mechanical properties. In this regard, interpenetrating polymer network (IPN) hydrogels can provide mechanical toughness greatly exceeding that of individual components; however, many IPN materials are not biocompatible for cell encapsulation. In this study, an agarose and poly(ethylene) glycol IPN hydrogel is seeded with human mesenchymal stem cells (MSCs). Results show high viability of MSCs within the IPN hydrogel, with improved mechanical properties compared to constructs comprised of individual components. These properties are further strengthened by integrating the hydrogel with a 3D woven structure. The resulting fiber-reinforced hydrogels display functional macroscopic mechanical properties mimicking those of native articular cartilage, while providing a local microenvironment that supports cellular viability and function. These findings suggest that a fiber-reinforced IPN hydrogel can support stem cell chondrogenesis while allowing for significantly enhanced, complex mechanical properties at multiple scales as compared to individual hydrogel or fiber components.

The quest for mechanically and biologically functional soft biomaterials via soft network composites

Developing multifunctional soft biomaterials capable of addressing all the requirements of the complex tissue regeneration process is a multifaceted problem. In order to tackle the current challenges, recent research efforts are increasingly being directed towards biomimetic design concepts that can be translated into soft biomaterials via advanced manufacturing technologies. Among those, soft network composites consisting of a continuous hydrogel matrix and a reinforcing fibrous network closely resemble native soft biological materials in terms of design and composition as well as physicochemical properties. This article reviews soft network composite systems with a particular emphasis on the design, biomaterial and fabrication aspects within the context of soft tissue engineering and drug delivery applications.

Propagation of Fatigue Cracks in Friction of Brittle Hydrogels

In order to understand fatigue crack propagation behavior in the friction of brittle hydrogels, we conducted reciprocating friction experiments between a hemi-cylindrical indenter and an agarose hydrogel block. We found that the fatigue life is greatly affected by the applied normal load as well as adhesion strength at the bottom of the gel⁻substrate interface. On the basis of in situ visualizations of the contact areas and observations of the fracture surfaces after the friction experiments, we suggest that the mechanical condition altered by the delamination of the hydrogel from the bottom substrate plays an essential role in determining the fatigue life of the hydrogel.

Recent Developments in Tough Hydrogels for Biomedical Applications

A hydrogel is a three-dimensional polymer network with high water content and has been attractive for many biomedical applications due to its excellent biocompatibility. However, classic hydrogels are mechanically weak and unsuitable for most physiological load-bearing situations. Thus, the development of tough hydrogels used in the biomedical field becomes critical. This work reviews various strategies to fabricate tough hydrogels with the introduction of non-covalent bonds and the construction of stretchable polymer networks and interpenetrated networks, such as the so-called double-network hydrogel. Additionally, the design of tough hydrogels for tissue adhesive, tissue engineering, and soft actuators is reviewed.

Double network hydrogel for tissue engineering

Double network (DN) hydrogels, a kind of promising soft and tough hydrogels, are produced by two unique contrasting networks with designed network entanglement burst into the field of materials science as versatile functional systems for a very broad range of applications. A part of the DN hydrogels is characterized by extraordinary mechanical properties providing efficient biocompatible and high strength for holding considerable promise in tissue engineering. Following DN hydrogels principles and consideration of biomedical applications, we provide an overall view of the present various DN hydrogels and look forward to the future of DN hydrogels for tissue engineering. In this review, the preparation methods, structure, properties, current situation, and challenges are mainly discussed for the purpose of tissue engineering. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement.

A low friction, biphasic and boundary lubricating hydrogel for cartilage replacement

Partial joint repair is a surgical procedure where an artificial material is used to replace localised chondral damage. These artificial bearing surfaces must articulate against cartilage, but current materials do not replicate both the biphasic and boundary lubrication mechanisms of cartilage. A research challenge therefore exists to provide a material that mimics both boundary and biphasic lubrication mechanisms of cartilage. In this work a polymeric network of a biomimetic boundary lubricant, poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC), was incorporated into an ultra-tough double network (DN) biphasic (water phase + polymer phase) gel, to form a PMPC triple network (PMPC TN) hydrogel with boundary and biphasic lubrication capability. The presence of this third network of MPC was confirmed using ATR-FTIR. The PMPC TN hydrogel had a yield stress of 26 MPa, which is an order of magnitude higher than the peak stresses found in the native human knee. A preliminary pin on plate tribology study was performed where both the DN and PMPC TN hydrogels experienced a reduction in friction with increasing sliding speed which is consistent with biphasic lubrication. In the physiological sliding speed range, the PMPC TN hydrogel halved the friction compared to the DN hydrogel indicating the boundary lubricating PMPC network was working. A biocompatible, tough, strong and chondral lubrication imitating PMPC TN hydrogel was synthesised in this work. By complementing the biphasic and boundary lubrication mechanisms of cartilage, PMPC TN hydrogel could reduce the reported incidence of chondral damage opposite partial joint repair implants, and therefore increase the clinical efficacy of partial joint repair.

STATEMENT OF SIGNIFICANCE

This paper presents the synthesis, characterisation and preliminary tribological testing of a new biomaterial that aims to recreate the primary chondral lubrication mechanisms: boundary and biphasic lubrication. This work has demonstrated that the introduction of an established zwitterionic, biomimetic boundary lubricant can improve the frictional properties of an ultra-tough hydrogel. This new biomaterial, when used as a partial joint replacement bearing material, may help avoid damage to the opposing chondral surface-which has been reported as an issue for other non-biomimetic partial joint replacement materials. Alongside the synthesis of a novel biomaterial focused on complementing the lubrication mechanisms of cartilage, your readership will gain insights into effective mechanical and tribological testing methods and materials characterisation methods for their own biomaterials.

Biomaterials for articular cartilage tissue engineering: Learning from biology

Articular cartilage is commonly described as a tissue that is made of up to 80% water, is devoid of blood vessels, nerves, and lymphatics, and is populated by only one cell type, the chondrocyte. At first glance, an easy tissue for clinicians to repair and for scientists to reproduce in a laboratory. Yet, chondral and osteochondral defects currently remain an open challenge in orthopedics and tissue engineering of the musculoskeletal system, without considering osteoarthritis. Why do we fail in repairing and regenerating articular cartilage? Behind its simple and homogenous appearance, articular cartilage hides a heterogeneous composition, a high level of organisation and specific biomechanical properties that, taken together, make articular cartilage a unique material that we are not yet able to repair or reproduce with high fidelity. This review highlights the available therapies for cartilage repair and retraces the research on different biomaterials developed for tissue engineering strategies. Their potential to recreate the structure, including composition and organisation, as well as the function of articular cartilage, intended as cell microenvironment and mechanically competent replacement, is described. A perspective of the limitations of the current research is given in the light of the emerging technologies supporting tissue engineering of articular cartilage.

STATEMENT OF SIGNIFICANCE

The mechanical properties of articular tissue reflect its functionally organised composition and the recreation of its structure challenges the success of in vitro and in vivo reproduction of the native cartilage. Tissue engineering and biomaterials science have revolutionised the way scientists approach the challenge of articular cartilage repair and regeneration by introducing the concept of the interdisciplinary approach. The clinical translation of the current approaches are not yet fully successful, but promising results are expected from the emerging and developing new generation technologies.

Anisotropic Growth of Hydroxyapatite in Stretched Double Network Hydrogel

Bone tissues possess excellent mechanical properties such as compatibility between strength and flexibility and load bearing owing to the hybridization of organic/inorganic matters with anisotropic structure. To synthetically mimic such an anisotropic structure of natural organic/inorganic hybrid materials, we carried out hydroxyapatite (HAp) mineralization in stretched tough double network (DN) hydrogels. Anisotropic mineralization of HAp took place in stretched hydrogels, as revealed by high brightness synchrotron X-ray scattering and transmission electron microscopic observation. The c-axis of mineralized HAp aligned along the stretching direction, and the orientation degree S calculated from scattering profiles increased with increasing in the elongation ratio λ of the DN gel, and S at λ = 4 became comparable to that of rabbit tibial bones. The morphology of HAp polycrystal gradually changed from spherical to unidirectional rod-like shape with increased elongation ratio. A possible mechanism for the anisotropic mineralization is proposed, which would be one of the keys to develop mechanically anisotropic organic/inorganic hybrid materials.

Study of locust bean gum reinforced cyst-chitosan and oxidized dextran based semi-IPN cryogel dressing for hemostatic application

Severe blood loss due to traumatic injuries remains one of the leading causes of death in emergency settings. Chitosan continues to be the candidate material for hemostatic applications due to its inherent hemostatic properties. However, available chitosan-based dressings have been reported to have an acidic odor at the wound site due to the incorporation of acid based solvents for their fabrication and deformation under compression owing to low mechanical strength limiting its usability. In the present study semi-IPN cryogel was fabricated via Schiff's base cross-linking between the polyaldehyde groups of oxidized dextran and thiolated chitosan in presence of locust bean gum (LBG) known for its hydrophilicity. Polymerization at -12 °C yielded macroporous semi-IPN cryogels with an average pore size of 124.57 ± 20.31 μm and 85.46% porosity. The hydrophobicity index of LBG reinforced semi-IPN cryogel was reduced 2.42 times whereas the swelling ratio was increased by 156.08% compare to control cryogel. The increased hydrophilicity and swelling ratio inflated the compressive modulus from 28.1 kPa to 33.85 for LBG reinforced semi-IPN cryogel. The structural stability and constant degradation medium pH were also recorded over a period of 12 weeks. The cryogels demonstrated lower adsorption affinity towards BSA. The cytotoxicity assays (direct, indirect) with 3T3-L1 fibroblast cells confirmed the cytocompatibility of the cryogels. The hemolysis assay showed <5% hemolysis confirming blood compatibility of the fabricated cryogel, while whole blood clotting and platelet adhesion assays confirmed the hemostatic potential of semi-IPN cryogel.

Nanocellulose as a sustainable biomass material: structure, properties, present status and future prospects in biomedical applications

Nanocellulose, extracted from the most abundant biomass material cellulose, has proved to be an environmentally friendly material with excellent mechanical performance owing to its unique nano-scaled structure, and has been used in a variety of applications as engineering and functional materials. The great biocompatibility and biodegradability, in particular, render nanocellulose promising in biomedical applications. In this review, the structure, treatment technology and properties of three different nanocellulose categories, i.e., nanofibrillated cellulose (NFC), nanocrystalline cellulose (NCC) and bacterial nanocellulose (BNC), are introduced and compared. The cytotoxicity, biocompatibility and frontier applications in biomedicine of the three nanocellulose categories were the focus and are detailed in each section. Future prospects concerning the cytotoxicity, applications and industrial production of nanocellulose are also discussed in the last section.

Fabrication of tough poly(ethylene glycol)/collagen double network hydrogels for tissue engineering

In this study, a series of poly(ethylene glycol)/collagen (PEG/Col) double network (DN) hydrogel is fabricated from PEG and Col. Results of the compressive strength test indicate that the strength and toughness of these DN hydrogels are significantly enhanced. The fracture strength of PEG/Col DN hydrogels increases by 9- to 12-fold compared with that of PEG single network (SN) hydrogel, and by 36- to 48-fold compared with that of Col SN hydrogel. Taking advantage of both PEG and Col building blocks, the PEG/Col DN hydrogels possess a strengthened skeleton. Moreover, the water-storage capability and favorable biocompatibility of Col are effectively maintained. Given that the DN hydrogels can provide the appropriate environment for the adhesion, growth, and proliferation of MC3T3-E1 cells, PEG/Col DN hydrogels have potential as a load-bearing tissue repair material. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 192-200, 2018.

A highly stretchable double-network composite

Inspired by the toughening mechanism of double-network (DN) hydrogels, a soft composite consisting of a fabric mesh and VHB tape layers was fabricated. The composite was as stiff as the fabric mesh, and as stretchable as the VHB tape. At certain compositions, the composite was significantly stronger and tougher than the base materials. The extensibility and toughness of the composite can be attributed to a damage delocalization mechanism similar to that of the DN gels. In the partially damaged regions, the fabric mesh fragmented into small islands, surrounded by the highly stretched VHB tapes. Accommodated by the finite sliding at the interface, the large deformation of the composite is highly non-affine. Just as the DN gels, the coexistence of the partially damaged and intact regions resulted in a stable necking in the composite when subjected to uniaxial tension. The propagation of the necking zone corresponded to a plateau on the stress-stretch curve. During cyclic loading, the composite also exhibited stress hysteresis with almost recoverable strain, similar to that in a DN gel. To rationalize these observations and to better understand the underlying physical mechanism, a simple 1D model has been developed for the damage evolution process in the composite. The predictions of the model have achieved good agreement with the measured properties of the composite of various compositions. Furthermore, the composite itself may also be regarded as a macroscopic model when studying the properties and toughening mechanism of the DN gels.

Hydroxyapatite-coated double network hydrogel directly bondable to the bone: Biological and biomechanical evaluations of the bonding property in an osteochondral defect

We have developed a novel hydroxyapatite (HAp)-coated double-network (DN) hydrogel (HAp/DN gel). The purpose of this study was to determine details of the cell and tissue responses around the implanted HAp/DN gel and to determine how quickly and strongly the HAp/DN gel bonds to the bone in a rabbit osteochondral defect model. Immature osteoid tissue was formed in the space between the HAp/DN gel and the bone at 2weeks, and the osteoid tissue was mineralized at 4weeks. The push-out load of the HAp/DN gel averaged 37.54N and 42.15N at 4 and 12weeks, respectively, while the push-out load of the DN gel averaged less than 5N. The bonding area of the HAp/DN gel to the bone was above 80% by 4weeks, and above 90% at 12weeks. This study demonstrated that the HAp/DN gel enhanced osseointegration at an early stage after implantation. The presence of nanoscale structures in addition to osseointegration of HAp promoted osteoblast adhesion onto the surface of the HAp/DN gel. The HAp/DN gel has the potential to improve the implant-tissue interface in next-generation orthopaedic implants such as artificial cartilage.

STATEMENT OF SIGNIFICANCE

Recent studies have reported the development of various hydrogels that are sufficiently tough for application as soft supporting tissues. However, fixation of hydrogels on bone surfaces with appropriate strength is a great challenge. We have developed a novel, tough hydrogel hybridizing hydroxyapatite (HAp/DN gel), which is directly bondable to the bone. The present study demonstrated that the HAp/DN gel enhanced osseointegration in the early stage after implantation. The presence of nanoscale structures in addition to the osseointegration ability of hydroxyapatite promoted osteoblast adhesion onto the surface of the HAp/DN gel. The HAp/DN gel has the potential to improve the implant-tissue interface in next-generation orthopaedic implants such as artificial cartilage.

Fracture toughness of hydrogels: measurement and interpretation

The fracture mechanics of hydrogels, especially those with significantly enhanced toughness, has attracted extensive research interests. In this article we discuss the experimental measurement and theoretical interpretation of the fracture toughness for soft hydrogels. We first review the definition of fracture toughness for elastic materials, and the commonly used experimental configurations to measure it. In reality most gels are inelastic. For gels that are rate insensitive, we discuss how to interpret the fracture toughness associated with two distinct scenarios: crack initiation and steady-state crack propagation. A formulation to estimate energy dissipation during steady-state crack propagation is developed, and connections to previous models in the literature are made. For gels with rate-dependent behaviors, we review the physical mechanisms responsible for the rate-dependence, and outline the difficulties to rigorously define the fracture toughness for both crack initiation and propagation. We conclude by discussing a few fundamental questions on the fracture of tough gels that are yet to be answered.

Injectable and Cytocompatible Tough Double-Network Hydrogels through Tandem Supramolecular and Covalent Crosslinking

Double-network theory is extended to include guest-host interactions, enabling injectability and cytcompatibility of tough hydrogels. Noncovalent interactions are used as a sacrificial network to toughen covalently crosslinked hydrogels formed from hyaluronic acid. Shear thinning of supramolecular bonds allows hydrogel injection and rapid self-healing, while gentle reaction conditions permit cell encapsulation with high viability.

Double-Network Hydrogels Strongly Bondable to Bones by Spontaneous Osteogenesis Penetration

On implanting hydroxyapatite-mineralized tough hydrogel into osteochondral defects of rabbits, osteogenesis spontaneously penetrates into the gel matrix owing to the semi-permeablility of the hydrogel. The gradient layer (around 40 μm thick) contributes quite strong bonding of the gel to bone. This is the first success in realizing the robust osteointegration of tough hydrogels, and the method is simple and feasible for practical use.

A Tissue-Penetrating Double Network Restores the Mechanical Properties of Degenerated Articular Cartilage

Incorporation of an interpenetrating polymer network into an existing single polymer network enables augmentation of the original substrate's mechanical properties, and translation of this concept from purely synthetic materials to natural-synthetic hybrid systems provides the opportunity to reinforce mechanical properties of bulk biological substrates. In many disease states, the mechanical properties of bodily tissues deteriorate rendering them prone to further material failure. Herein, a tissue-supplementing technique is described in which an interpenetrating biomimetic hydrogel is polymerized in situ throughout cartilage tissue. The treatment restores the inferior compressive properties of osteoarthritic cartilage to that of healthy cartilage, preferentially localizing to weaker regions of tissue. Furthermore, the treatment technique preserves cartilage under harsh articulation conditions, showing promise as a materials-based treatment for early-stage osteoarthritis.

Magnetite-Loaded Thermosensitive Nanogels for Bioinspired Lubrication and Multimodal Friction Control

The ability to control friction is quite attractive for many applications. Other than mechanical/physical methods to control friction, this letter shows how materials chemistry can regulate friction effectively. Magnetite-loaded thermosensitive poly(N-isopropylacrylamide) nanogels (Fe₃O₄@PNIPAM) were synthesized as nanoparticulate soft matter to reduce friction when it is used as an additive in aqueous lubricant. Interestingly, friction can be multiply regulated by temperature, magnetism, and near-infrared light through manipulating the colloidal properties of multifunctional composite nanogels in bulk solution and at the frictional interface.

A robust double-network hydrogel with under sea water superoleophobicity fabricated via one-pot, one-step reaction

A robust double-network (DN) hydrogel fabricated by a one-pot, one-step reaction is reported.

Double-network hydrogel and its potential biomedical application: A review

Double-network hydrogels are one of the most promising candidates as artificial soft supporting tissues owing to their excellent mechanical performance, water storage capability, and biocompatibility. A double-network hydrogel consists of two contrasting polymer networks: rigid and brittle first network and soft and ductile second network. To satisfy this double-network requirement, polyelectrolyte and neutral polymer are suitable as the first and the second networks, respectively. Combination of these two networks gives rise to extraordinarily tough double-network hydrogel as a result of substantial internal fracture of the brittle first network at large deformation, which contributes to the energy dissipation. Therefore, the first network serves as the sacrificial bonds to toughen the material. The double-network principle is universal and many kinds of double-network hydrogels composed of various chemical species have been developed. Moreover, a molecular stent technology has been developed to synthesize the double-network hydrogels using neutral polymer network as the brittle first network. The sulfonic double-network hydrogel was found to induce spontaneous hyaline cartilage regeneration in vivo.

Biphasic and boundary lubrication mechanisms in artificial hydrogel cartilage: A review

Various studies on the application of artificial hydrogel cartilage to cartilage substitutes and artificial joints have been conducted. It is expected in clinical application of artificial hydrogel cartilage that not only soft-elastohydrodynamic lubrication but biphasic, hydration, gel-film and boundary lubrication mechanisms will be effective to sustain extremely low friction and minimal wear in daily activities similar to healthy natural synovial joints with adaptive multimode lubrication. In this review article, the effectiveness of biphasic lubrication and boundary lubrication in hydrogels in thin film condition is focused in relation to the structures and properties of hydrogels. As examples, the tribological behaviors in three kinds of poly(vinyl alcohol) hydrogels with high water content are compared, and the importance of lubrication mechanism in biomimetic artificial hydrogel cartilage is discussed to extend the durability of cartilage substitute.

Quantifying the lubricity of mechanically tough polyvinyl alcohol hydrogels for cartilage repair

Polyvinyl alcohol hydrogels are biocompatible and can be used as synthetic articular cartilage. Their mechanical characteristics can be tailored by various techniques such as annealing or blending with other hydrophilic polymers. In this study, we quantified the coefficient of friction of various candidate polyvinyl alcohol hydrogels against cobalt–chrome alloy or swine cartilage using a new rheometer-based method. We investigated the coefficient of friction of polyvinyl alcohol–only hydrogels and blends with polyethylene glycol, polyacrylic acid, and polyacrylamide against swine cartilage and polished cobalt–chrome surfaces. The addition of the functional groups to polyvinyl alcohol, such as acrylamide (semi-interpenetrating network) and acrylic acid (blend), significantly reduced the coefficient of friction. The coefficient of friction of the polyvinyl alcohol–only hydrogel was measured as 0.4 ± 0.03 against cobalt–chrome alloy, and 0.09 ± 0.004 against cartilage, while those measurements for the polyvinyl alcohol–polyacrylic acid blends and polyvinyl alcohol–polyacrylamide semi-interpenetrating network were 0.07 ± 0.01 and 0.1 ± 0.003 against cobalt–chrome alloy, and 0.03 ± 0.001 and 0.02 ± 0.001 against cartilage, respectively. There was no significant or minimal difference in the coefficient of friction between samples from different regions of the knee, or animals, or when the cartilage samples were frozen for 1 day or 2 days before testing. However, changing lubricant from deionized water to ionic media, for example, saline or simulated body fluid, increased the coefficient of friction significantly.

Preparation, characterization, and biocompatibility evaluation of poly(Nɛ-acryloyl-L-lysine)/hyaluronic acid interpenetrating network hydrogels

In the present study, poly(Nɛ-acryloyl-L-lysine)/hyaluronic acid (pLysAAm/HA) interpenetrating network (IPN) hydrogels were successfully fabricated through the combination of hydrazone bond crosslinking and photo-crosslinking reactions. The HA hydrogel network was first synthesized from 3,3'-dithiodipropionate hydrazide-modified HA and polyethylene glycol dilevulinate by hydrazone bond crosslinking. The pLysAAm hydrogel network was prepared from Nɛ-acryloyl-L-lysine and N,N'-bis(acryloyl)-(L)-cystine by photo-crosslinking. The resultant pLysAAm/HA hydrogels had a good shape recovery property after loading and unloading for 1.5 cycles (up to 90%) and displayed a highly porous microstructure. Their compressive moduli were at least 5 times higher than that of HA hydrogels. The pLysAAm/HA hydrogels had an equilibrium swelling ratio of up to 37.9 and displayed a glutathione-responsive degradation behavior. The results from in vitro biocompatibility evaluation with pre-osteoblasts MC3T3-E1 cells revealed that the pLysAAm/HA hydrogels could support cell viability and proliferation. Hematoxylin and eosin staining indicated that the pLysAAm/HA hydrogels allowed cell and tissue infiltration, confirming their good in vivo biocompatibility. Therefore, the novel pLysAAm/HA IPN hydrogels have great potential for bone tissue engineering applications.

Injectable conducting interpenetrating polymer network hydrogels from gelatin-graft-polyaniline and oxidized dextran with enhanced mechanical properties

Injectable conducting interpenetrating polymer network hydrogels based on gelatin-graft-polyaniline, carboxymethyl-chitosan and oxidized dextran with enhanced mechanical properties and excellent biocompatibility.

Hairy polyelectrolyte brushes-grafted thermosensitive microgels as artificial synovial fluid for simultaneous biomimetic lubrication and arthritis treatment

We report the fabrication of poly(3-sulfopropyl methacrylate potassium salt) (PSPMK) brushes grafted poly(N-isopropylacrylamide) (PNIPAAm) microgels and their potential as artificial synovial fluid for biomimetic aqueous lubrication and arthritis treatment. The negatively charged PSPMK brushes and thermosensitive PNIPAAm microgels play water-based hydration lubrication and temperature-triggered drug release, respectively. Under soft friction pairs, an ultralow coefficient of friction was achieved, while the hairy thermosensitive microgels showed a desirable temperature-triggered drugs release performance. Such a soft charged hairy microgel offers great possibility for designing intelligent synovial fluid. What is more, the combination of lubrication and drug loading capabilities enables the large clinical potential of novel soft hairy nanoparticles as synthetic joint lubricant fluid in arthritis treatment.