Effects of surface wettability and contact time on protein adhesion to biomaterial surfaces

Polycaprolactone-based antibacterial nanofibrous containing vanadium/hydroxyapatite with morphology, mechanical properties, and in vitro studies

Repairing the damaged wound tissues is a vital demand to keep an adequate clinical care system. In this work, nanofibrous scaffolds of polycaprolactone (PCL) have been encapsulated with hydroxyapatite (HAP)...

Surface Electric Fields Increase Human Osteoclast Resorption through Improved Wettability on Carbonate-Incorporated Apatite

Osteoclast-mediated bioresorption can be an efficient means of incorporating the dissolution of biomaterials in the bone remodeling process. Because of the compositionally and structurally close resemblance of biomaterials with the natural mineral phases of the bone matrix, synthetic carbonate-substituted apatite (CA) is considered as an ideal biomaterial for clinical use. The present study therefore investigated the effects of electrical polarization on the surface characteristics and interactions with human osteoclasts of hydroxyapatite (HA) and CA. Electrical polarization was found to improve the surface wettability of these materials by increasing the surface free energy, and this effect was maintained for 1 month. Analyses of human osteoclast cultures established that CA subjected to a polarization treatment enhanced osteoclast resorption but did not affect the early differentiation phase or the adherent morphology of the osteoclasts as evaluated by staining. These data suggest that the surface characteristics of the CA promoted osteoclast resorption. The results of this work are expected to contribute to the future design of cell-mediated bioresorbable biomaterials capable of resorption by osteoclasts and of serving as a scaffold for bone regeneration.

Multifunctional polyethylene imine hybrids decorated by silica bioactive glass with enhanced mechanical properties, antibacterial, and osteogenesis for bone repair

Inorganic/organic hybrids and bioactive glasses demonstrate promising potential as bone substitute biomaterials. A sol-gel hybrid consisting of silica bioactive glass and biodegradable polymer can combine the high bioactivity of a glass with the toughness of a polymer. In this study, multifunctional hybrids with a combination of organic-inorganic hybrid structure class II consisting of polyethyleneimine (PEI) generation 4 (G4) and bioactive glass with enhanced mechanical properties, mineralization, antibacterial, and osteogenesis activities were synthesized by the sol-gel method. Glycidoxypropyl) trimethoxysilane (GPTMS) with different concentrations was used as a covalent bonding agent between PEI polymer and bioactive glass. The effect of GPTMS content was assessed in the presence and absence of calcium in the hybrid structures in terms of morphology, wettability, mechanical properties, antibacterial activity, cell viability, and in vitro osteogenic differentiation properties. By increasing the amount of GPTMS, the compressive strength increased from 1.95 MPa to 2.34 MPa, which was comparable to human trabecular bone. All the hybrids presented antibacterial activity against Staphylococcus aureus, forming an inhibition zone of 13-16 mm. An increase in cell viability of 82.22% in PSCaG90 was obtained after 1 day of MG-63 cell culture. Alkaline phosphatase expression and mineralization of MG-63 cells increased in the PSCaG90 hybrid in the absence of an osteogenic medium compared to PSG60 and PSG90. The PSCaG90 hybrid indicated considerable in vitro osteogenic capacity in the absence of a differentiation medium, expressing high levels of bone-specific proteins including collagen I (COL1A1), Runt-related transcription factor 2 (RUNX2), osteopontin (OPN), and osteocalcin (OCN), compared to calcium-free hybrids. Overall, our results suggest that the presence of calcium in the PSCaG90 leads to a significant increase in osteogenic differentiation of MG-63 cells even in the absence of differentiation medium, which suggests these hybrid structures with multifunctional properties as promising candidates for bone repair.

Physics and Physiology of Cell Spreading in Two and Three Dimensions

Cells spread on surfaces and within three-dimensional (3-D) matrixes as they grow, divide, and move. Both chemical and physical signals orchestrate spreading during normal development, wound healing, and pathological states such as fibrosis and tumor growth. Diverse molecular mechanisms drive different forms of cell spreading. This article discusses mechanisms by which cells spread in 2-D and 3-D and illustrates new directions in studies of this aspect of cell function.

Matching the Cellulose/Silica Films Surface Properties for Design of Biomaterials That Modulate Extracellular Matrix

The surface properties of composite films are important to know for many applications from the industrial domain to the medical domain. The physical and chemical characteristics of film/membrane surfaces are totally different from those of the bulk due to the surface segregation of the low surface energy components. Thus, the surfaces of cellulose acetate/silica composite films are analyzed in order to obtain information on the morphology, topography and wettability through atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and contact angle investigations. The studied composite films present different surface properties depending on the tetraethyl orthosilicate (TEOS) content from the casting solutions. Up to a content of 1.5 wt.% TEOS, the surface roughness and hydrophobicity increase, after which there is a decrease in these parameters. This behavior suggests that up to a critical amount of TEOS, the results are influenced by the morphology and topographical features, after which a major role seems to be played by surface chemistry-increasing the oxygenation surfaces. The morphological and chemical details and also the hydrophobicity/hydrophilicity characteristics are discussed in the attempt to design biological surfaces with optimal wettability properties and possibility of application in tissue engineering.

Reduction of Recombinant Adeno-Associated Virus Vector Adsorption on Solid Surfaces by Polyionic Hydrophilic Complex Coating

Recombinant adeno-associated virus (rAAV) vectors have proven efficacy as gene therapy vehicles. However, non-specific adsorption of these vectors on solid surfaces is encountered during production, storage, and administration, as well as in quantification processes. Such adsorption has been reported to result in the loss of up to 90% of vector particles and can also result in high variability in vector genome quantification. In this study, we demonstrate the effective decrease of recombinant adeno-associated virus vector adsorption by application of a polyionic hydrophilic complex polymer coating on the surfaces of the tools used in viral vector quantification analyses [i.e., pipette tips, cryotube vials, and quantitative polymerase chain reaction (qPCR) plates]. qPCR analyses showed efficient recovery of vector particles from tools with this coating, with up to 95% of vector particle loss being prevented, leading to a higher transduction efficiency in vitro. Thus, the tested coating has the potential to be widely used in material processing in the gene therapy field.

Immune Response to Silk Sericin-Fibroin Composites: Potential Immunogenic Elements and Alternatives for Immunomodulation

The unique properties of silk proteins (SPs), particularly silk sericin (SS) and silk fibroin (SF), have attracted attention in the design of scaffolds for tissue engineering over the past decades. Since SF has good mechanical properties, while SS displays bioactivity, scaffolds combining both proteins should exhibit complementary properties enhancing the potential of these materials. Unfortunately, SS-SF composites can generate chronic immune responses and their immunogenic element is not completely clear. The potential of SS-SF composites in tissue engineering, elements which may contribute to their immunogenicity, and alternatives for their preparation and design, to modulate the immune response and take advantage of their useful properties, are discussed in this review. It is known that SS can enhance β-sheet formation in SF, which may act as hydrophobic regions with a strong affinity for adsorption proteins inducing the chronic recruitment of inflammatory cells. Therefore, tailoring the exposure of hydrophobic regions at the scaffold surface should represent a viable strategy to modulate the immune response. This can be achieved by coating SS-SF composites with SS or other hydrophilic polymers, to take advantage of their antibiofouling properties. Research is still needed to realize the full potential of these composites for tissue engineering.

Biophysical properties of electrospun chitosan-grafted poly(lactic acid) nanofibrous scaffolds loaded with chondroitin sulfate and silver nanoparticles

The aim of this work was to study the biophysical properties of the chitosan-grafted poly(lactic acid) (CH-g-PLA) nanofibers loaded with silver nanoparticles (AgNPs) and chondroitin-4-sulfate (C₄S). The electrospun CH-g-PLA:AgNP:C₄S nanofibers were manufactured using the electrospinning technique. The microstructure of the CH-g-PLA:AgNP:C₄S nanofibers was investigated by proton nuclear magnetic resonance (¹H-NMR), scanning electron microscopy (SEM), UV-Visible spectroscopy (UV-Vis), X-ray diffraction (XRD), and Fourier transform infrared (ATR-FTIR) spectroscopy. ATR-FTIR and ¹H-NMR confirm the CH grafting successfully by PLA with a substitution degree of 33.4%. The SEM measurement results indicated apparently smooth nanofibers having a diameter range of 340 ± 18 nm with porosity of 89 ± 3.08% and an average pore area of 0.27 μm². UV-Vis and XRD suggest that silver nanoparticles with the size distribution of 30 nm were successfully incorporated into the electrospun nanofibers. The water contact angle of 12.8 ± 2.7° reveals the hydrophilic nature of the CH-g-PLA:AgNP:C₄S nanofibers has been improved by C₄S. The electrospun CH-g-PLA:AgNP:C₄S nanofibers are found to release ions Ag+ at a concentration level capable of rendering an antimicrobial efficacy. Gram-positive bacteria (S.aureus) were more sensitive to CH-g-PLA:AgNP:C₄S than Gram-negative bacteria (E. coli). The electrospun CH-g-PLA:AgNP:C₄S nanofibers exhibited no cytotoxicity to the L-929 fibroblast cells, suggesting cytocompatibility. Fluorescence microscopy demonstrated that C₄S promotes the adhesion and proliferation of fibroblast cells onto electrospun CH-g-PLA:AgNP:C₄S nanofibers.

Biomaterial Wettability Affects Fibrin Clot Structure and Fibrinolysis

Thrombosis on blood-contacting medical devices can cause patient fatalities through device failure and unstable thrombi causing embolism. The effect of material wettability on fibrin network formation, structure, and stability is poorly understood. Under static conditions, fibrin fiber network volume and density increase in clots formed on hydrophilic compared to hydrophobic polystyrene surfaces. This correlates with reduced plasma clotting time and increased factor XIIa (FXIIa) activity. These structural differences are consistent up to 50 µm away from the material surface and are FXIIa dependent. Fibrin forms fibers immediately at the material interface on hydrophilic surfaces but are incompletely formed in the first 5 µm above hydrophobic surfaces. Additionally, fibrin clots on hydrophobic surfaces have increased susceptibility to fibrinolysis compared to clots formed on hydrophilic surfaces. Under low-flow conditions, clots are still denser on hydrophilic surfaces, but only 5 µm above the surface, showing the combined effect of the surface wettability and coagulation factor dilution with low flow. Overall, wettability affects fibrin fiber formation at material interfaces, which leads to differences in bulk fibrin clot density and susceptibility to fibrinolysis. These findings have implications for thrombus formed in stagnant or low-flow regions of medical devices and the design of nonthrombogenic materials.

Non-coating method for non-adherent cell culture using high molecular weight dextran sulfate and bovine serum albumin

Non-adherent cell culture surface has been widely used for producing cell spheroids and cell aggregates. The purpose of this study was to formulate a new method for non-adherent cell culture without coating or surface-modification that has been needed. We found that high-molecular-weight dextran sulfate (DS) and bovine serum albumin (BSA) synergistically prevented cell adhesion in media supplemented with no or low serum. This method worked on tissue culture-treated polystyrene surfaces as well as on commercially available low-attachment- and untreated polystyrene surfaces. Further investigation revealed that BSA may mediate the adsorption of DS to the surface. In addition, as the adsorption of fluorescently labeled fibronectin was inhibited by BSA alone, it appears that protein adsorption and cell adhesion do not always correlate. Finally, we demonstrated the successful formation of HepG2 spheroids and cardiomyocyte aggregates using this method. In conclusion, cell adhesion can be effectively suppressed by simply adding DS and BSA to the culture medium without coating or surface modification, and it may be useful for generating cell spheroids and aggregates.

Injectable catalyst-free "click" organic-inorganic nanohybrid (click-ON) cement for minimally invasive in vivo bone repair

Injectable polymers have attracted intensive attention in tissue engineering and drug delivery applications. Current injectable polymer systems often require free-radical or heavy-metal initiators and catalysts for the crosslinking process, which may be extremely toxic to the human body. Here, we report a novel polyhedral oligomeric silsesquioxane (POSS) based strain-promoted alkyne-azide cycloaddition (SPAAC) "click" organic-inorganic nanohybrids (click-ON) system that can be click-crosslinked without any toxic initiators or catalysts. The click-ON scaffolds supported excellent adhesion, proliferation, and osteogenesis of stem cells. In vivo evaluation using a rat cranial defect model showed outstanding bone formation with minimum cytotoxicity. Essential osteogenic alkaline phosphatase (ALP) and vascular CD31 marker expression were detected on the defect site, indicating excellent support of in vivo osteogenesis and vascularization. Using salt leaching techniques, an injectable porous click-ON cement was developed to create porous structures and support better in vivo bone regeneration. Beyond defect filling, the click-ON cement also showed promising application for spinal fusion using rabbits as a model. Compared to the current clinically used poly (methyl methacrylate) (PMMA) cement, this click-ON cement showed great advantages of low heat generation, better biocompatibility and biodegradability, and thus has great potential for bone and related tissue engineering applications.

Electrophoretically Deposited Chitosan/Eudragit E 100/AgNPs Composite Coatings on Titanium Substrate as a Silver Release System

Due to the possibility of bacterial infections occurring around peri-implant tissues, it is necessary to provide implant coatings that release antibacterial substances. The scientific goal of this paper was to produce by electrophoretic deposition (EPD) a smart, chitosan/Eudragit E 100/silver nanoparticles (chit/EE100/AgNPs) composite coating on the surface of titanium grade 2 using different deposition parameters, such as the content of AgNPs, applied voltage, and time of deposition. The morphology, surface roughness, thickness, chemical and phase composition, wettability, mechanical properties, electrochemical properties, and silver release rate at different pH were investigated. Using lower values of deposition parameters, coatings with more homogeneous morphology were obtained. The prepared coatings were sensitive to the reduced pH environment.

Bioinspired Biomaterial Composite for All-Water-Based High-Performance Adhesives

The exceptional underwater adhesive properties displayed by aquatic organisms, such as mussels (Mytilus spp.) and barnacles (Cirripedia spp.) have long inspired new approaches to adhesives with a superior performance both in wet and dry environments. Herein, a bioinspired adhesive composite that combines both adhesion mechanisms of mussels and barnacles through a blend of silk, polydopamine, and Fe3+ ions in an entirely organic, nontoxic water-based formulation is presented. This approach seeks to recapitulate the two distinct mechanisms that underpin the adhesion properties of the Mytilus and Cirripedia, with the former secreting sticky proteinaceous filaments called byssus while the latter produces a strong proteic cement to ensure anchoring. The composite shows remarkable adhesive properties both in dry and wet conditions, favorably comparing to synthetic commercial glues and other adhesives based on natural polymers, with performance comparable to the best underwater adhesives with the additional advantage of having an entirely biological composition that requires no synthetic procedures or processing.

What affects the biocompatibility of polymers?

In recent decades synthetic polymers have gained increasing popularity, and nowadays they are an integral part of people's daily lives. In addition, owing to their competitive advantage and being susceptible to modification, polymers have stimulated the fast development of innovative technologies in many areas of science. Biopolymers are of particular interest in various branches of medicine, such as implantology of bones, cartilage and skin tissues as well as blood vessels. Biomaterials with such specific applications must have appropriate mechanical and strength characteristics and above all they must be compatible with the surrounding tissues, human blood and its components, i.e. exhibit high hemo- and biocompatibility, low or no thrombo- and carcinogenicity, foreign body response (host response), appropriate osteoconduction, osteoinduction and mineralization. For biocompatibility improvement many surface treatment techniques have been utilized leading to fabricate the polymer biomaterials of required properties, also at nanoscale. This review paper discusses the most important physicochemical and biological factors that affect the biocompatibility, thus the reaction of the living organism after insertion of the polymer-based biomaterials, i.e. surface modification and/or degradation, surface composition (functional groups and charge), size and shapes, hydrophilic-hydrophobic character, wettability and surface free energy, topography (roughness, stiffness), crystalline and amorphous structure, nanostructure, cell adhesion and proliferation, cellular uptake. Particularly, the application of polysaccharides (chitosan, cellulose, starch) in the tissue engineering is emphasized.

Manipulating Mesenchymal Stem Cell Differentiation on Nanopattern Constructed through Cell-Mediated Mineralization

The extracellular matrix microenvironment, including chemical constituents and topological structure, plays key role in regulating the cell behavior, such as adhesion, proliferation, differentiation, apoptosis, etc. Until now, to investigate the relationship between surface texture and cell response, various ordered patterns have been prepared on the surface of different matrixes, whereas almost all these strategies depend on advanced instruments or severe synthesis conditions. Herein, cell-mediated mineralization method has been applied to construct nanopattern on the surface of β-TCP scaffold. The formation process, morphology, and composition of the final pattern were characterized, and a possible mineralization mechanism has been proposed. Moreover, the cell behavior on the nanopattern has been investigated, and the results showed that the mouse bone marrow mesenchyme stem cells (mBMSCs) display good affinity with the nanopattern, which was manifested by the good proliferation and osteogenic differentiation status of cells. The synthetic strategy may shed light to construct advanced topological structures on other matrixes for bone repair.

Implant Fibrosis and the Underappreciated Role of Myofibroblasts in the Foreign Body Reaction

Body implants and implantable medical devices have dramatically improved and prolonged the life of countless patients. However, our body repair mechanisms have evolved to isolate, reject, or destroy any object that is recognized as foreign to the organism and inevitably mounts a foreign body reaction (FBR). Depending on its severity and chronicity, the FBR can impair implant performance or create severe clinical complications that will require surgical removal and/or replacement of the faulty device. The number of review articles discussing the FBR seems to be proportional to the number of different implant materials and clinical applications and one wonders, what else is there to tell? We will here take the position of a fibrosis researcher (which, coincidentally, we are) to elaborate similarities and differences between the FBR, normal wound healing, and chronic healing conditions that result in the development of peri-implant fibrosis. After giving credit to macrophages in the inflammatory phase of the FBR, we will mainly focus on the activation of fibroblastic cells into matrix-producing and highly contractile myofibroblasts. While fibrosis has been discussed to be a consequence of the disturbed and chronic inflammatory milieu in the FBR, direct activation of myofibroblasts at the implant surface is less commonly considered. Thus, we will provide a perspective how physical properties of the implant surface control myofibroblast actions and accumulation of stiff scar tissue. Because formation of scar tissue at the surface and around implant materials is a major reason for device failure and extraction surgeries, providing implant surfaces with myofibroblast-suppressing features is a first step to enhance implant acceptance and functional lifetime. Alternative therapeutic targets are elements of the myofibroblast mechanotransduction and contractile machinery and we will end with a brief overview on such targets that are considered for the treatment of other organ fibroses.

Manipulating cell behavior on a bacterial macro-polymer poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) via tuning the S-doped graphene ratio

Graphene is a material with various application potentials Graphene is a unique material with superiorities and has been applied in various fields for different purposes. Although studies on the utility of graphene oxide in the biomedical field are available, no evaluation has yet been done regarding the utility of sulfur doped (S-doped) graphene. The study focuses on the effect of blending the poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) membrane with sulfur heteroatom doped graphene and the evaluation of biological responses to S-doped graphene/PHBHHx. PHBHHx membranes were blended with 1%, 0.5%, 0.1% (w/v) S-doped graphene. The morphological (SEM and Microscopy), chemical (FTIR and Raman spectroscopy), and surface area (BET) characterizations of S-doped graphene/PHBHHx membranes were performed. The presence of S groups on the surface was determined with the EDS results. Besides, the swelling profile and biodegradation tendency of the membranes were evaluated. The differentiation of protein adhesion, cell viability, cell adhesion, and cell proliferation by the increasing content of S-doped graphene was examined. The contact angle analysis revealed that modification of PHBHHx with S-doped Graphene reduced the free surface energy of PHBHHx membranes. Blending with S-doped Graphene has decreased the polarity of the PHBHHx membrane. The protein adsorption on the PHBHHx membrane was determined as 10.12 ± 0.247 mg/ml. Protein absorption on 1%, 0.5% and 0.1% S-doped graphene/PHBHHx membranes were determined as 11.34 ± 0.551 mg/ml, 9.91 ± 0.294 mg/ml and 9.48 ± 0.093 mg/ml, respectively. The cell attachment to the surface decreased with the increasing amount of S-doped graphene, however, PHBHHx membranes with graphene did not affect cytotoxicity. S-doped graphene blended PHBHHx membrane seems like a suitable patch for biomedical treatments as a hydrophobic membrane where less cell adhesion and proliferation are required like the prevention of peritoneal adhesion.

Surface Testing of Dental Biomaterials-Determination of Contact Angle and Surface Free Energy

The key goal of this study was to characterize surface properties of chosen dental materials on the base on the contact angle measurements and surface free energy calculations. Tested materials were incubated in the simulated oral environment and drinks to estimate an influence of conditions similar to those in the oral cavity on wetting and energetic state of the surface. Types of materials were as follows: denture acrylic resins, composite and PET-G dental retainer to compare basic materials used in a prosthetics, restorative dentistry and orthodontics. The sessile drop method was used to measure the contact angle with the use of several liquids. Values of the surface free energies were estimated based on the Owens-Wendt, van Oss-Chaudhury-Good and Zisman's methods. The research showed that surface wetting depends on the material composition and storage conditions. The most significance changes of CA were observed for acrylic resins (84.7° ± 3.8° to 65.5° ± 3.5°) and composites (58.8° ± 4.1° to 49.1° ± 5.7°) stored in orange juice, and for retainers (81.9° ± 1.8° to 99.6° ± 4.5°) incubated in the saline solution. An analysis of the critical surface energy showed that acrylic materials are in the zone of good adhesion (values above 40 mJ/m²), while BIS-GMA composites are in the zone of poor adhesion (values below 30 mJ/m²). Study of the surface energy of different dental materials may contribute to the development of the thermodynamic model of bacterial adhesion, based on the surface free energies, and accelerate the investigation of biomaterial interaction in the biological environment.

Host Response to Biomaterials for Cartilage Tissue Engineering: Key to Remodeling

Biomaterials play a core role in cartilage repair and regeneration. The success or failure of an implanted biomaterial is largely dependent on host response following implantation. Host response has been considered to be influenced by numerous factors, such as immune components of materials, cytokines and inflammatory agents induced by implants. Both synthetic and native materials involve immune components, which are also termed as immunogenicity. Generally, the innate and adaptive immune system will be activated and various cytokines and inflammatory agents will be consequently released after biomaterials implantation, and further triggers host response to biomaterials. This will guide the constructive remolding process of damaged tissue. Therefore, biomaterial immunogenicity should be given more attention. Further understanding the specific biological mechanisms of host response to biomaterials and the effects of the host-biomaterial interaction may be beneficial to promote cartilage repair and regeneration. In this review, we summarized the characteristics of the host response to implants and the immunomodulatory properties of varied biomaterial. We hope this review will provide scientists with inspiration in cartilage regeneration by controlling immune components of biomaterials and modulating the immune system.

Biodegradable Anti-Biofilm Fiber-Membrane Ureteral Stent Constructed with a Robust Biomimetic Superhydrophilic Polycationic Hydration Surface Exhibiting Synergetic Antibacterial and Antiprotein Properties

The biofouling of ureteral stents and subsequent urinary tract infections mainly come from the adsorption and adhesion of proteins and microorganisms and their ensuing proliferation. Although general polycationic surfaces in implants have good antibacterial activities, they suffer from limited durability due to severe protein and bacterial adsorption. Here, a biodegradable and anti-biofilm fiber-membrane structured ureteral stent (FMBUS) with synergetic contact-killing antibacterial activity and antiprotein adsorption is described. The stent is prepared by generating hyperbranched poly(amide-amine)-grafted polydopamine microparticles (≈300 nm) on the surface of fibers by in situ polymerization and Schiff base reactions. The biomimetic surface endows the FMBUS with a positive charge (+21.36 mV) and superhydrophilicity (water contact angle: 0°). As a result, the stents fulfilled the following functions: i) reduced attachment of host protein due to superhydrophilicity (Lysozyme: 92.1%; human serum albumin: 39.4%); ii) high bactericidal activities against contact pathogenic bacteria (contact-killing rate: 99.9999% for both E. coli and S. aureus; antiadhesion rate: 99.2% for E. coli and 99.9999% for S. aureus); iii) biocompatibility in vitro (relative growth rate of L929: >90% on day 3) and in vivo; and iv) gradient biodegradability to avoid a second surgery of stent extraction 1-2 weeks after implantation.

Foreign Body Reaction to Implanted Biomaterials and Its Impact in Nerve Neuroprosthetics

The implantation of any foreign material into the body leads to the development of an inflammatory and fibrotic process-the foreign body reaction (FBR). Upon implantation into a tissue, cells of the immune system become attracted to the foreign material and attempt to degrade it. If this degradation fails, fibroblasts envelop the material and form a physical barrier to isolate it from the rest of the body. Long-term implantation of medical devices faces a great challenge presented by FBR, as the cellular response disrupts the interface between implant and its target tissue. This is particularly true for nerve neuroprosthetic implants-devices implanted into nerves to address conditions such as sensory loss, muscle paralysis, chronic pain, and epilepsy. Nerve neuroprosthetics rely on tight interfacing between nerve tissue and electrodes to detect the tiny electrical signals carried by axons, and/or electrically stimulate small subsets of axons within a nerve. Moreover, as advances in microfabrication drive the field to increasingly miniaturized nerve implants, the need for a stable, intimate implant-tissue interface is likely to quickly become a limiting factor for the development of new neuroprosthetic implant technologies. Here, we provide an overview of the material-cell interactions leading to the development of FBR. We review current nerve neuroprosthetic technologies (cuff, penetrating, and regenerative interfaces) and how long-term function of these is limited by FBR. Finally, we discuss how material properties (such as stiffness and size), pharmacological therapies, or use of biodegradable materials may be exploited to minimize FBR to nerve neuroprosthetic implants and improve their long-term stability.

Prospects of Polymeric Nanofibers Loaded with Essential Oils for Biomedical and Food-Packaging Applications

Essential oils prevent superbug formation, which is mainly caused by the continuous use of synthetic drugs. This is a significant threat to health, the environment, and food safety. Plant extracts in the form of essential oils are good enough to destroy pests and fight bacterial infections in animals and humans. In this review article, different essential oils containing polymeric nanofibers fabricated by electrospinning are reviewed. These nanofibers containing essential oils have shown applications in biomedical applications and as food-packaging materials. This approach of delivering essential oils in nanoformulations has attracted considerable attention in the scientific community due to its low price, a considerable ratio of surface area to volume, versatility, and high yield. It is observed that the resulting nanofibers possess antimicrobial, anti-inflammatory, and antioxidant properties. Therefore, they can reduce the use of toxic synthetic drugs that are utilized in the cosmetics, medicine, and food industries. These nanofibers increase barrier properties against light, oxygen, and heat, thereby protecting and preserving the food from oxidative damage. Moreover, the nanofibers discussed are introduced with naturally derived chemical compounds in a controlled manner, which simultaneously prevents their degradation. The nanofibers loaded with different essential oils demonstrate an ability to increase the shelf-life of various food products while using them as active packaging materials.

Modeling and Experimental Validation of Microbial Transfer via Surface Touch

Surface touch spreads disease-causing microbes, but the measured rates of microbial transfer vary significantly. Additionally, the mechanisms underlying microbial transfer via surface touch are unknown. In this study, a new physical model was proposed to accurately evaluate the microbial transfer rate in a finger-surface touch, based on the mechanistic effects of important physical factors, including surface roughness, surface wetness, touch force, and microbial transfer direction. Four surface-touch modes were distinguished, namely, a single touch, sequential touches (by different recipients), repeated touches (by the same recipient), and a touch with rubbing. The tested transfer rates collated from 26 prior studies were compared with the model predictions based on their experimental parameters, and studies in which the transfer rates were more consistent with our model predictions were identified. New validation experiments were performed by accurately controlling the parameters involved in the model. Four types of microbes were used to transfer between the naked finger and metal surface with the assistance of a purpose-made touch machine. The measured microbial transfer rate data in our new experiments had a smaller standard deviation than those reported from prior studies and were closer to the model prediction. Our novel predictive model sheds light on possible future studies.

Integrating biomaterials and food biopolymers for cultured meat production

Cultured meat has recently achieved mainstream prominence due to the emergence of societal and industrial interest. In contrast to animal-based production of traditional meat, the cultured meat approach entails laboratory cultivation of engineered muscle tissue. However, bioengineers have hitherto engineered tissues to fulfil biomedical endpoints, and have had limited experience in engineering muscle tissue for its post-mortem traits, which broadly govern consumer definitions of meat quality. Furthermore, existing tissue engineering approaches face fundamental challenges in technical feasibility and industrial scalability for cultured meat production. This review discusses how animal-based meat production variables influence meat properties at both the molecular and functional level, and whether current cultured meat approaches recapitulate these properties. In addition, this review considers how conventional meat producers employ exogenous biopolymer-based meat ingredients and processing techniques to mimic desirable meat properties in meat products. Finally, current biomaterial strategies for engineering muscle and adipose tissue are surveyed in the context of emerging constraints that pertain to cultured meat production, such as edibility, sustainability and scalability, and potential areas for integrating biomaterials and food biopolymer approaches to address these constraints are discussed. STATEMENT OF SIGNIFICANCE: Laboratory-grown or cultured meat has gained increasing interest from industry and the public, but currently faces significant impediment to market feasibility. This is due to fundamental knowledge gaps in producing realistic meat tissues via conventional tissue engineering approaches, as well as translational challenges in scaling up these approaches in an efficient, sustainable and high-volume manner. By defining the molecular basis for desirable meat quality attributes, such as taste and texture, and introducing the fundamental roles of food biopolymers in mimicking these properties in conventional meat products, this review aims to bridge the historically disparate fields of meat science and biomaterials engineering in order to inspire potentially synergistic strategies that address some of these challenges.

The ultralong-term comparison of osteogenic behavior of three scaffolds with different matrices and degradability between one and two years

Attributed to their structure and composition manipulated to mimic natural bone tissue, porous scaffolds composed of inorganic nano-hydroxyapatite (n-HA) and organic polymers with different degrees of degradability have been proven to be a promising bone regeneration strategy. However, long-term and in-depth comparative research on the effects of scaffolds with different matrices and degrees of degradability on bone reconstruction is still lacking. In this study, the ultralong-term osteogenic performance of three polymeric composite scaffolds based on non-degradable polyamide 66 (PA66), slowly degradable polycaprolactone (PCL) and fast degradable poly (lactic-co-glycolic acid) (PLGA) were investigated comparatively after implanting the scaffolds into rabbit femoral defects for 12, 15, 18 and 21 months. The results demonstrated that the structural integrity of the scaffolds played a positive role in long-term bone reconstruction. Thus the n-HA/PA66 and n-HA/PCL scaffolds have a higher relative bone volume and bone density than the n-HA/PLGA scaffolds from 12 to 21 months. In addition, the favorable surface wettability and collagen-like molecular structure should endow the n-HA/PA66 scaffold with the best long-term osteogenic property among the three scaffolds. The ultralong-term comparative study reveals that a relatively stable scaffold integrity, together with favorable matrix molecular characteristics and hydrophilicity, may be more important for long-term osteogenesis besides the effect of scaffold pore structure, rather than the pursuit of fast scaffold degradation. The results also show that the space left by scaffold degradation is not easily occupied by new bone tissue, especially after bone tissue has formed a stable structure or the bone interface has become inert.

Titanium and Protein Adsorption: An Overview of Mechanisms and Effects of Surface Features

Titanium and its alloys, specially Ti6Al4V, are among the most employed materials in orthopedic and dental implants. Cells response and osseointegration of implant devices are strongly dependent on the body-biomaterial interface zone. This interface is mainly defined by proteins: They adsorb immediately after implantation from blood and biological fluids, forming a layer on implant surfaces. Therefore, it is of utmost importance to understand which features of biomaterials surfaces influence formation of the protein layer and how to guide it. In this paper, relevant literature of the last 15 years about protein adsorption on titanium-based materials is reviewed. How the surface characteristics affect protein adsorption is investigated, aiming to provide an as comprehensive a picture as possible of adsorption mechanisms and type of chemical bonding with the surface, as well as of the characterization techniques effectively applied to model and real implant surfaces. Surface free energy, charge, microroughness, and hydroxylation degree have been found to be the main surface parameters to affect the amount of adsorbed proteins. On the other hand, the conformation of adsorbed proteins is mainly dictated by the protein structure, surface topography at the nano-scale, and exposed functional groups. Protein adsorption on titanium surfaces still needs further clarification, in particular concerning adsorption from complex protein solutions. In addition, characterization techniques to investigate and compare the different aspects of protein adsorption on different surfaces (in terms of roughness and chemistry) shall be developed.

Biomimetic Culture Strategies for the Clinical Expansion of Mesenchymal Stromal Cells

Mesenchymal stromal/stem cells (MSCs) typically require significant ex vivo expansion to achieve the high cell numbers required for research and clinical applications. However, conventional MSC culture on planar (2D) plastic surfaces has been shown to induce MSC senescence and decrease cell functionality over long-term proliferation, and usually, it has a high labor requirement, a high usage of reagents, and therefore, a high cost. In this Review, we describe current MSC-based therapeutic strategies and outline the important factors that need to be considered when developing next-generation cell expansion platforms. To retain the functional value of expanded MSCs, ex vivo culture systems should ideally recapitulate the components of the native stem cell microenvironment, which include soluble cues, resident cells, and the extracellular matrix substrate. We review the interplay between these stem cell niche components and their biological roles in governing MSC phenotype and functionality. We discuss current biomimetic strategies of incorporating biochemical and biophysical cues in MSC culture platforms to grow clinically relevant cell numbers while preserving cell potency and stemness. This Review summarizes the current state of MSC expansion technologies and the challenges that still need to be overcome for MSC clinical applications to be feasible and sustainable.

Biological Roles and Delivery Strategies for Ions to Promote Osteogenic Induction

Bone is the most studied tissue in the field of tissue regeneration. Even though it has intrinsic capability to regenerate upon injury, several pathologies and injuries could hamper the highly orchestrated bone formation and resorption process. Bone tissue engineering seeks to mimic the extracellular matrix of the tissue and the different biochemical pathways that lead to successful regeneration. For many years, the use of extrinsic factors (i.e., growth factors and drugs) to modulate these biological processes have been the preferred choice in the field. Even though it has been successful in some instances, this approach presents several drawbacks, such as safety-concerns, short release profile and half-time life of the compounds. On the other hand, the use of inorganic ions has attracted significant attention due to their therapeutic effects, stability and lower biological risks. Biomaterials play a key role in such strategies where they serve as a substrate for the incorporation and release of the ions. In this review, the methodologies used to incorporate ions in biomaterials is presented, highlighting the osteogenic properties of such ions and the roles of biomaterials in controlling their release.

In vitro haemocompatibility assessment of acrylic acid deposited on solid, polyurethane substrate

The main purpose of the work was to assess the haemocompatible properties of polyurethane discs with a modified surface dedicated to cardiovascular system regeneration. They were coated with acrylic acid-based material to inhibit the activation of the blood coagulation cascade. This coating improved the wettability of the material, leading to the prevention of protein adsorption on the surface. The blood-material interaction was analyzed in dynamic conditions with a specially designed tester, which helps to control blood-material interaction under high shear stress conditions. The corresponding numerical model of the tester was also developed by finite volume method (FVM). The 3D FVM model allows the determination of shear stresses applying different flow and boundary conditions representing blood-material interactions. The haemocompatibility analyses were performed through in vitro tests using a blood flow simulator. They revealed a low probability of activation of blood coagulation and low leukocyte activation. The original mechanical set-up to test the blood-material interaction helped to prove that acrylic acid-based coatings expressed good haemocompatible properties.

Architectural and Ultrastructural Variations of Human Leukocyte-Rich Platelet-Rich Fibrin and Injectable Platelet-Rich Fibrin

Background:

Platelet-rich fibrin (PRF) architecture and ultrastructure plays a crucial role in regulating and coordinating the cellular functions and provides a physical architecture, mechanical stability, and biochemical cues necessary for tissue morphogenesis and homeostasis. No study consciously reported the variation in architecture, ultrastructure, and morphology of leukocyte-rich PRF (L-PRF) and injectable PRF (i-PRF).

Objective:

Hence, the present study was aimed to evaluate the fibrin architecture, ultrastructure, and cell contents of autologous L-PRF and i-PRF.

Materials and Methods:

The autologous L-PRF and i-PRF were prepared from blood samples of healthy donors. The morphological and structural variations were assessed by histopathology, atomic force microscopy, confocal laser scanning microscope, and field emission scanning electron microscope.

Results:

Disparity was found on architecture and ultrastructure of L-PRF and i-PRF fibrin network. The variation in platelet and leukocyte concentration attributed to the fibrin conformational changes. L-PRF shows thick fibrins with rough surface, whereas in i-PRF, smooth thin fibrins.

Conclusions:

The current study revealed that there is heterogeneity between L-PRF and i-PRF fibrin matrix architecture, ultrastructure, platelets, leukocytes, and the fibrin content. These speculate that the diameter, width, roughness, and smoothness of fibrin fibers, pore size, and shapes of L-PRF and i-PRF matrix may initiate and mediate the scaffold functions differently.

The Effect of Electrophoretic Deposition Parameters on the Microstructure and Adhesion of Zein Coatings to Titanium Substrates

Zein coatings were obtained by electrophoretic deposition (EPD) on commercially pure titanium substrates in an as-received state and after various chemical treatments. The properties of the zein solution, zeta potential and conductivity, at varying pH values were investigated. It was found that the zein content and the ratio of water to ethanol of the solution used for EPD, as well as the process voltage value and time, significantly influence the morphology of coatings. The deposits obtained from the solution containing 150 g/L and 200 g/L of zein and 10 vol % of water and 90 vol % of ethanol, about 4-5 μm thick, were dense and homogeneous. The effect of chemical treatment of the Ti substrate surface prior to EPD on coating adhesion to the substrate was determined. The coatings showed the highest adhesion to the as-received and anodized substrates due to the presence of a thick TiO2 layer on their surfaces and the presence of specific surface features. Coated titanium substrates showed slightly lower electrochemical corrosion resistance than the uncoated one in Ringer's solution. The coatings showed a well-developed surface topography compared to the as-received substrate, and they demonstrated hydrophilic nature. The present results provide new insights for the further development of zein-based composite coatings for biomedical engineering applications.

Targeting Early Healing Phase with Titania Nanotube Arrays on Tunable Diameters to Accelerate Bone Regeneration and Osseointegration

Blood coagulation and inflammation are the earliest biological responses to implant surfaces. Implant nano-surfaces can significantly impact the osseointegration through the influence on the early phase of bone regeneration. However, the interplay between blood clot property and inflammatory reaction on nanosurfaces is rarely understood. Herein, titania nanotube arrays (TNAs) with different diameters are fabricated on titanium. In vitro evaluation with the whole blood indicates that TNA with a diameter of 15 nm (TNA 15) enables noteworthy platelet activation resulting in distinct clot features compared with that of pure Ti and TNA with a diameter of 120 nm (TNA 120). Further co-culture with macrophages on the clot or in the clot-conditioned medium shows that the clot on TNA 15 downregulates the inflammation and manipulates a favorable osteoimmunomodulatory environment for osteogenesis. In vivo studies further demonstrate that TNA 15 could downregulate the inflammation-related genes while upregulating growth metabolism-related genes in an early healing hematoma. Additionally, TNA 15 promotes de novo bone formation with improved extending of osteocyte dendrites, demonstrating the desired osseointegration. These findings indicate that surface nano-dimensions can significantly influence clot formation and appropriate clot features can manipulate a favorable osteoimmunomodulatory environment for bone regeneration and osseointegration.

Photopolymerized poly(l-lactide-b-N-vinyl-2-pyrrolidone) network resists cell adhesion in situ

A three-armed star-shaped poly(l-lactide) (PLLA) oligomer was synthesized using glycerol to ring-opening and polymerize l-lactide. The resultant oligomer introduced photoreactive groups at the terminal of PLLA chains by a coupling reaction with monoethyl fumarate (FAME). Photopolymerizable resin has been prepared by mixing PLLA 3-FAME, N-vinyl-2-pyrrolidone (NVP) as a reactive diluent and Irgacure 2959 as a photoinitiator. The PLLA 3-FAME/NVP cross-linked network could be formed by UV curing and was characterized through mechanical property tests, cytotoxicity experiments and cell adhesion experiments. In the dry state, Young's modulus and tensile strength of the network were significantly higher than those of pure PLLA formed by fused deposition modeling (FDM) printing, due to the formation of the cross-linked net. In the wet state, however, Young's modulus and tensile strength of the network were reduced by less than those of PLLA since the water-absorbed NVP content was easy to stretch. Moreover, the resultant network not only exhibited no obvious cytotoxicity but also resisted the adhesion of L929 fibroblasts. Combined with Digital Light Processing (DLP) technology, the poly(l-lactide-b-N-vinyl-2-pyrrolidone) network may be widely used in the field of anti-adhesion barrier materials and/or biological anti-fouling materials with customization requirements.

The poly(l-lactide-b-N-vinyl-2-pyrrolidone) network could be formed by UV curing, and resist the adhesion of L929 fibroblasts. It could be used in the field of biological anti-fouling material with customization requirements.

Direct photoreactive immobilization of water-soluble phospholipid polymers on substrates in an aqueous environment

The purpose of this study is to achieve a simpler and safer surface modification of substrates using a photoreactive polymer in an aqueous environment. We synthesized water-soluble photoreactive polymers with both phenylazide groups and phosphorylcholine groups, poly(2-methacryloyloxyethyl phosphorylcholine-co-4-methacryl tetra(ethylene glycol)oxycarbonyl-4-phenylazide) (PMEPAz), via reversible addition fragmentation chain transfer polymerization. PMEPAz with different polymerization degrees were synthesized with a well-defined structure. To immobilize PMEPAz on the substrate surface by photoreaction, it is necessary to adsorb the polymer on the substrate surface in an aqueous solution because the phenylazide groups chemically bind to the substrate via a hydrogen abstract reaction. The relationship between the polymer solubilization state in the aqueous solution and the adsorption behavior at the surface was investigated. PMEPAz began to form unstable molecular aggregates at a concentration of 10^-2 mg/mL and formed stable aggregates at 10⁰ mg/mL. At a concentration of 10^-1 mg/mL, unstable molecular aggregates of PMEPAz were formed in the aqueous solution, resulting in the maximization of the amount of adsorbed polymer and effective photoreaction with the substrate. The thickness of the reacted polymer layer on the substrate increased with an increase in the polymerization degree, a uniform polymer layer with a thickness of 3.4 nm was formed when the polymerization degree was 400. After surface modification, the hydrophobic surfaces of the original substrates became hydrophilic. Additionally, fibrinogen adsorption and platelet adhesion were effectively suppressed based on the characteristics of the phosphorylcholine unit.

Poly(l-lactide)-Based Anti-Inflammatory Responsive Surfaces for Surgical Implants

In the last few decades, surgical implants have been widely used to restore the function of damaged bones or joints. However, it is essential to receive antibiotic or anti-inflammatory treatment to circumvent significant problems associated, such as the colonization of the implanted surface by bacteria or other microorganisms and strong host inflammatory responses. This article presents the effectiveness of the copper catalyzed alkyne-azide cycloaddition (CuAAC) (“click”) reaction by the linkage of a fluorophore to the poly(L-lactide) (PLLA) surface. The results were analysed by means of X-ray photoelectron spectroscopy (XPS), contact angle and fluorescence microscopy. Moreover, this current work describes the covalent immobilization of the anti-inflammatory drug indomethacin on a PLLA surface. The CuAAC click reaction was selected to anchor the drug to the polymeric films. The successful bioconjugation of the drug was confirmed by XPS and the change on the contact angle.

Silkworm Silk Fiber Bundles as Improved In Vitro Scaffolds for Skeletal Muscle

To mimic skeletal muscle tissues in vitro, native and transgenic spider silk/silkworm silks were seeded with C2C12 myoblasts to observe if these three-dimensional substrates are preferable to a traditional two-dimensional polystyrene cell culture surface. Silks were wound around an acrylic chassis to produce a novel, three-dimensional cell culture device with suspended muscle fibers that genetically and morphologically resemble native skeletal muscle tissue. The transgenic spider silk/silkworm silk has never before been studied for this application. Genetic expression verified skeletal muscle lineage and differentiation, while fluorescent imaging verified contractile protein synthesis. Genetic analysis also revealed an increase in expression of the Myh2 contractile protein gene on silkworm silks, particularly on the transgenic silk. Mechanical properties and protein secondary structure content of the silks indicated correlation between substrate properties and Myh2 gene expression. This increase in contractile protein gene expression suggests that biologically derived silk substrates that are suspended may be a preferable substrate for in vitro muscle modeling because of the proteinaceous character and mechanical flexibility of the silk.

A novel γ-PGA composite gellan membrane containing glycerol for guided bone regeneration

An ideal barrier membrane design should incorporate the function of a delivery vehicle for transporting drugs and osteoinductive factors to where the body is under inflammation. In the present study, a functional hydrogel-based barrier membrane is fabricated using calcium-form poly-γ-glutamic acid (γ-PGA) and glycerol blending into gellan gum. The concentration of the calcium-form poly-γ-glutamic acid (γ-PGA) and the glycerol ratio are studied for improving practicability in easy-handling and expanding the coverage area. Gellan gum-based membranes with uniformly distributed calcium aggregates are not only successfully manufactured but also providing excellent characteristics for protein adsorption, bioactivity, and bone cell maturation. Our composite gellan gum-based membranes were tested including to their morphology, mechanical properties, swelling behavior, protein adsorption, drug diffusion, and lysozyme degradation. The biocompatibility, proliferation, and osteoblastic response of membranes were examined by osteoblast-like (MG63) cells. Our results indicate that adequate physical cross-linking with γ-PGA improves the original mechanical properties and delays degradation. Growing glycerol ratio not only enhances the elongation at break and diffusion rate, but it also changes the tensile strength and the remaining weight. In vitro biocompatibility tests, an adequate ratio of γ-PGA modification significantly enhances the proliferation, the secretion of alkaline phosphatase (ALP) and mineralization. However, worth noting is the glycerol-modified membrane cannot bear a close resemblance with the non-glycerol group in the high level of osteoblastic response. In general, these tunable materials with biocompatibility, biodegradability, and positive osteoblastic responses were poised to be possible candidates for bone defect repair.

Effect of Nitrided and Nitrocarburised Austenite on Pitting and Crevice Corrosion Resistance of 316LVM Steel Implants

Harmful lesions occur in the body around multielement stabilisers made of AISI 316 LVM (Low Vacuum Melted) steel, caused by products of pitting, fretting or crevice corrosion. Preventing the effect is possible by modifying the surface of the steel implants. Therefore, the goal of the paper is the comparison of the mechanical and physiochemical properties of plates for treating deformations of the anterior chest wall made of AISI 316 LVM steel, subjected to diffusion and sterilisation processes and exposed to Ringer's solution. The surface of the implants was subjected to electrochemical polishing, chemical passivation and, in order to modify their properties, nitrocarburised and nitrided diffusion layers were created on selected stabilisers under glow discharge conditions with the use of an active screen at a temperature of 420 °C, over 60 min. The conducted studies involved the examination of the microstructure of the formed layers, surface roughness testing, analysis of contact angles and surface free energy, examination of resistance to pitting and crevice corrosion and examination of nanohardness. On the basis of the results of the conducted studies, it was established that the most advantageous set of properties after sterilisation and exposure to Ringer's solution was displayed by implants with a formed diffusion nitrocarburised layer.

Selected Physicochemical Properties of Diamond Like Carbon (DLC) Coating on Ti-13Nb-13Zr Alloy Used for Blood Contacting Implants

Despite high interest in the issues of hemocompatibility of titanium implants, particularly those made of the Ti-13Nb-13Zr alloy, the applied methods of surface modification still do not always guarantee the physicochemical properties required for their safe operation. The factors that reduce the efficiency of the application of titanium alloys in the treatment of conditions of the cardiovascular system include blood coagulation and fibrous proliferation within the vessel’s internal walls. They result from their surfaces’ physicochemical properties not being fully adapted to the specifics of the circulatory system. Until now, the generation and development mechanics of these adverse processes are not fully known. Thus, the fundamental problem in this work is to determine the correlation between the physicochemical properties of the diamond like carbon (DLC) coating (shaped by the technological conditions of the process) applied onto the Ti-13Nb-13Zr alloy designed for contact with blood and its hemocompatibility. In the paper, microscopic metallographic, surface roughness, wettability, free surface energy, hardness, coating adhesion to the substrate, impendence, and potentiodynamic studies in artificial plasma were carried out. The surface layer with the DLC coating ensures the required surface roughness and hydrophobic character and sufficient pitting corrosion resistance in artificial plasma. On the other hand, the proposed CrN interlayer results in better adhesion of the coating to the Ti-13Nb-13Zr alloy. This type of coating is an alternative to the modification of titanium alloy surfaces using various elements to improve the blood environment’s hemocompatibility.

Dual drug delivery system based on pH-sensitive silk fibroin/alginate nanoparticles entrapped in PNIPAM hydrogel for treating severe infected burn wound

Herein, the pH-sensitive vancomycin (VANCO) loaded silk fibroin-sodium alginate nanoparticles (NPs) embedded in poly(N-isopropylacrylamide) (PNIPAM) hydrogel containing epidermal growth factor (EGF) are introduced for treating chronic burn wound infections. The hybrid system was developed to control the release rates of an antibiotic and growth factor for optimal treatment of burn infections. VANCO had a pH responsive release behavior from the nanoparticle (NP) and showed higher release rate in an alkaline pH compared to the neutral pH during 10 d. About 30% of EGF was also released from the hydrogel within 20 d. The released VANCO and EGF preserved their bioactivity more than ∼ 80%. The suitable physico-chemical properties and cellular behaviors of PNIPAM hydrogel supported the proliferation and growth of the fibroblast cells. Furthermore, the higher re-epithelialization with good wound contraction rate, neovascular formation, and expression of transforming growth factor-beta were observed in S. aureus infected rat burn wound by using the hydrogel containing VANCO and EGF compared with untreated wounds and hydrogel alone. The wound infection was also significantly reduced in the groups treated with the hydrogels containing VANCO. Overall, in vitro and in vivo results suggested that developed hybrid system would be a promising construct to treat severe wound infection.

New injectable self-assembled hydrogels that promote angiogenesis through a bioactive degradation product

Hydrogels used in regenerative medicine are often designed to allow cellular infiltration, degradation, and neovascularization. Low molecular weight hydrogels (LMWHs), formed by self-assembly via non-covalent interactions, are gaining significant interest because they are soft, easy to use and injectable. We propose LMWHs as suitable body implant materials that can stimulate tissue regeneration. We produced four new LMWHs with molecular entities containing nucleic acid and lipid building blocks and analyzed the foreign body response upon subcutaneous implantation into mice. Despite being infiltrated with macrophages, none of the hydrogels triggered detrimental inflammatory responses. Most macrophages present in the hydrogel-surrounding tissue acquired an immuno-modulatory rather than inflammatory phenotype. Concomitantly, no fibrotic capsule was formed after three weeks. Our glyconucleolipid LMWHs exhibited different degradation kinetics in vivo and in vitro. LMWHs with high angiogenic properties in vivo, were found to release glyconucleoside (glucose covalently linked to thymidine via a triazole moiety) as a common by-product of in vitro LMWH degradation. Chemically synthesized glyconucleoside exhibited angiogenic properties in vitro in scratch assays with monolayers of human endothelial cells and in vivo using the chick chorioallantoic membrane assay. Collectively, LMWHs hold promise as efficient scaffolds for various regenerative applications by displaying good biointegration without causing fibrosis, and by promoting angiogenesis through the release of a pro-angiogenic degradation product. STATEMENT OF SIGNIFICANCE: The main limitations of biomaterials developed in the field of tissue engineering remains their biocompatibility and vascularisation properties. In this context, we developed injectable Low Molecular Weight Hydrogels (LMWH) exhibiting thixotropic (reversible gelation) and thermal reversible properties. LMWH having injectability is of great advantage since it allows for their delivery without wounding the surrounding tissues. The resulting gels aim at forming scaffolds that the host cells colonize without major inflammation, and that won't be insulated by a strong fibrosis reaction. Importantly, their molecular degradation releases a product (a glycosyl-nucleoside conjugate) promoting angiogenesis. In this sense, these LMWH represent an important advance in the development of biomaterials promoting tissue regeneration.

3D printing of silk microparticle reinforced polycaprolactone scaffolds for tissue engineering applications

Polycaprolactone (PCL) scaffolds have been widely investigated for tissue engineering applications, however, they exhibit poor cell adhesion and mechanical properties. Subsequently, PCL composites have been produced to improve the material properties. This study utilises a natural material, Bombyx mori silk microparticles (SMP) prepared by milling silk fibre, to produce a composite to enhance the scaffolds properties. Silk is biocompatible and biodegradable with excellent mechanical properties. However, there are no studies using SMPs as a reinforcing agent in a 3D printed thermoplastic polymer scaffold. PCL/SMP (10, 20, 30 wt%) composites were prepared by melt blending. Rheological analysis showed that SMP loading increased the shear thinning and storage modulus of the material. Scaffolds were fabricated using a screw-assisted extrusion-based additive manufacturing system. Scanning electron microscopy and X-ray microtomography was used to determine scaffold morphology. The scaffolds had high interconnectivity with regular printed fibres and pore morphologies within the designed parameters. Compressive mechanical testing showed that the addition of SMP significantly improved the compressive Young's modulus of the scaffolds. The scaffolds were more hydrophobic with the inclusion of SMP which was linked to a decrease in total protein adsorption. Cell behaviour was assessed using human adipose derived mesenchymal stem cells. A cytotoxic effect was observed at higher particle loading (30 wt%) after 7 days of culture. By day 21, 10 wt% loading showed significantly higher cell metabolic activity and proliferation, high cell viability, and cell migration throughout the scaffold. Calcium mineral deposition was observed on the scaffolds during cell culture. Large calcium mineral deposits were observed at 30 wt% and smaller calcium deposits were observed at 10 wt%. This study demonstrates that SMPs incorporated into a PCL scaffold provided effective mechanical reinforcement, improved the rate of degradation, and increased cell proliferation, demonstrating potential suitability for bone tissue engineering applications.

The Effect of Various Surface Treatments of Ti6Al4V on the Growth and Osteogenic Differentiation of Adipose Tissue-Derived Stem Cells

The physical and chemical properties of the material surface, especially its roughness and wettability, have a crucial effect on the adhesion, proliferation, and differentiation of cells. The aim of this study is to select the most appropriate surface modifications of Ti6Al4V implants for pre-colonization of the implants with adipose tissue-derived stem cells (ASCs) in order to improve their osseointegration. We compared the adhesion, growth, and osteogenic differentiation of rat ASCs on Ti6Al4V samples modified by methods commonly used for preparing clinically used titanium-based implants, namely polishing (PL), coating with diamond-like carbon (DLC), brushing (BR), anodizing (AND), and blasting (BL). The material surface roughness, measured by the Ra and Rq parameters, increased in the following order: PL < DLC ˂ BR ˂ AND ˂ BL. The water drop contact angle was in the range of 60–74°, with the exception of the DLC-coated samples, where it was only 38°. The cell number, morphology, mitochondrial activity, relative fluorescence intensity of osteogenic markers RUNX2, type 1 collagen, and osteopontin, the calcium consumption by the cells and the alkaline phosphatase activity depended on the surface roughness rather than on the surface wettability of the materials. Materials with a surface roughness of several tens of nanometers (Ra 60–70 nm), i.e., the BR and AND samples, supported a satisfactory level of cell proliferation. At the same time, they achieved the highest level of osteogenic cell differentiation. These surface modifications therefore seem to be most suitable for pre-colonization of Ti6Al4V implants with stem cells pre-differentiated toward osteoblasts, and then for implanting them into the bone tissue.

The Challenge of Cleaning Woven Filter Cloth in the Beverage Industry—Wash Jets as an Appropriate Solution

Beverage production requires many different and complex unit operations. One crucial procedural step is filtration. Typical filters are filter presses, candle filters, membrane filters, belt filters, and drum filters, which require considerable hygienic precaution and the application of appropriate cleaning concepts. In the last decades, the hygienic design has become a central design feature of equipment in the beverage and food industries. Today, also correspondent concepts regarding filter cloth increasingly come to the fore. However, filter cloth cleaning is rapidly facing limitations. Complex filter geometries originating from different gauzes and sensitive polymeric materials hinder efficient cleaning. Additionally, extensive biological residues adhering to the filter surface increase the challenge of cleaning. The goal of this paper is to outline the cleaning of woven filter cloths systematically with a particular focus on beverages and correspondent biophysical interactions between filter and residue. Based on these elemental cleaning limits of filter cloths, this paper focuses mainly on jet cleaning as one of the most appropriate cleaning methods. The flow-mechanical properties are discussed in detail since these are precisely the parameters that, on the one hand, describe the understanding of the cleaning process and, on the other hand, show how a wash jet can be adjusted precisely. In contrast to conventional cleaning techniques, such wash jets are expeditious to adapt and offer the best prerequisites to enable demand-oriented and optimized cleaning concepts. The latest research and approaches are enhancing jet efficiency and highlight their potentials for future process strategies.