The enhanced characteristics of osteoblast adhesion to photofunctionalized nanoscale TiO2 layers on biomaterials surfaces

Calcium Plasma Implanted Titanium Surface with Hierarchical Microstructure for Improving the Bone Formation

Introducing hierarchical microstructure and bioactive trace elements simultaneously onto the surface of titanium implant is a very effective way to improve the osseointegration between bone and implant. In this work, hierarchical topography was prepared on Ti surface via acid etching and sandblasting (SLA) to form micropits and microcavities then underwent Ca plasma immersion ion implantation (Ca-PIII) process. The surface wettability and roughness did not change obviously before and after Ca-PIII process. The in vitro evaluations including cell adhesion, activity, alkaline phosphatase (ALP), osteogenic genes (Runx2, OSX, ALP, BSP, Col1a1, OPN, and OC), and protein (BSP, Col1a1, OPN, and OC) expressions revealed that the introduction of Ca ions onto the surface of SLA-treated Ti can promote greater osteoblasts adhesion, spread and proliferation, which in return further accelerated the maturation and mineralization of osteoblasts. More importantly, in vivo evaluations including Micro-CT evaluation, histological observations, push-out test, sequential fluorescent labeling and histological observations verified that Ca-SLA-treated Ti implants could efficiently promote new bone formation in early times. These promising results suggest that Ca-SLA-treated Ti has the potential for future application in orthopedic field.

Assessment of Atmospheric Pressure Plasma Treatment for Implant Osseointegration

This study assessed the osseointegrative effects of atmospheric pressure plasma (APP) surface treatment for implants in a canine model. Control surfaces were untreated textured titanium (Ti) and calcium phosphate (CaP). Experimental surfaces were their 80-second air-based APP-treated counterparts. Physicochemical characterization was performed to assess topography, surface energy, and chemical composition. One implant from each control and experimental group (four in total) was placed in one radius of each of the seven male beagles for three weeks, and one implant from each group was placed in the contralateral radius for six weeks. After sacrifice, bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were assessed. X-ray photoelectron spectroscopy showed decreased surface levels of carbon and increased Ti and oxygen, and calcium and oxygen, posttreatment for Ti and CaP surfaces, respectively. There was a significant (P < 0.001) increase in BIC for APP-treated textured Ti surfaces at six weeks but not at three weeks or for CaP surfaces. There were no significant (P = 0.57) differences for BAFO between treated and untreated surfaces for either material at either time point. This suggests that air-based APP surface treatment may improve osseointegration of textured Ti surfaces but not CaP surfaces. Studies optimizing APP parameters and applications are warranted.

Ultraviolet-C irradiation to titanium implants increases peri-implant bone formation without impeding mineralization in a rabbit femur model

OBJECTIVES

Volume and bone quality of peri-implant supporting bone, in particular, at implant neck region, as well as bone-implant contact ratio, is important for long-term stability of implants. Ultraviolet-C (UVC) irradiation is known to enhance the osseointegration capability of titanium implants. However, the histological determination was performed only on a rat model, but not pre-clinical animal model such as a rabbit model. The purpose of this study was to determine the effects of UVC irradiation on titanium implants on the volume and mineral density of peri-implant supporting bone formation in a rabbit femur model.

MATERIALS AND METHODS

Acid-etched pure titanium screw implants with or without 3 mW/cm2 UVC irradiation for 48 h were placed in rabbit femur diaphyses. Peri-implant bone tissue formation was analyzed at 3 and 8 weeks post-operatively by histology and micro-CT-based bone morphometry after calibration with hydroxyl apatite phantoms.

RESULTS

UVC pre-irradiated implants accumulated a higher density of cells and thicker and longer bone tissue attachments that continued into the inner basic lamellae of the surface of existing cortical bone at 3 and 8 weeks than the implants without irradiation. Although the bone mineral density around both implants was equivalent to that of the existing cortical bone, bone volume was greater with UVC pre-irradiation in two-thirds or more of the apical region throughout the observation period.

CONCLUSIONS

These results indicate that UVC treatment increased the volume of cortical-like bone tissue in the coronal region of titanium implants without deterioration of bone mineral density.

Osteogenic cell sheets reinforced with photofunctionalized micro-thin titanium

Cell sheet technology has been used to deliver cells in single-sheet form with an intact extracellular matrix for soft tissue repair and regeneration. Here, we hypothesized that titanium-reinforced cell sheets could be constructed for bone tissue engineering and regeneration. Fifty-µm-thick titanium plates containing apertures were prepared and roughened by acid etching, some of which were photofunctionalized with 12 min of UV light treatment. Cell sheets were prepared by culturing rat calvarial periosteum-derived cells on temperature-responsive culture dishes and attached to titanium plates. Titanium-reinforced osteogenic cell sheet construction was conditional on various technical and material factors: cell sheets needed to be double-sided and sandwich the titanium plate, and the titanium plates needed to be micro thin and contain apertures to allow close apposition of the two cell sheets. Critically, titanium plates needed to be UV-photofunctionalized to ensure adherence and retention of cell sheets. Single-sided cell sheets or double-sided cell sheets on as-made titanium contracted and deformed within 4 days of incubation. Titanium-reinforced cell sheets on photofunctionalized titanium were structurally stable at least up to 14 days, developed the expected osteogenic phenotypes (ALP production and mineralization), and maintained structural integrity without functional degradation. Successful construction of titanium-reinforced osteogenic cell sheets was associated with increased cell attachment, retention, and expression of vinculin, an adhesion protein by photofunctionalization. This study identified the technical and material requirements for constructing titanium-reinforced osteogenic cell sheets. Future in vivo studies are warranted to test these titanium-reinforced cell sheets as stably transplantable, mechanically durable, and shape controllable osteogenic devices.

Ultraviolet irradiation enhanced bioactivity and biological response of mesenchymal stem cells on micro-arc oxidized titanium surfaces

This present study investigated the effect of ultraviolet (UV) irradiation on bioactivity of micro-arc oxidized (MAO) titanium surface in vitro by cell culture medium immersion test and interactions with rat-derived mesenchymal stem cells (MSCs). UV-irradiated MAO surface exhibited no obvious changes in surface roughness, morphology, and phase composition when compared with MAO-only surface. However, in cell culture medium immersion test, markedly more bone-like apatite was formed on UV-modified samples than on MAO sample. Rat bone marrow- and adipose tissue-derived MSCs cultured on UV-modified samples displayed accelerated attachment, significant higher levels of alkaline phosphatase (ALP) activity, and up-regulated osteogenesis-related mRNA expression than MAO sample. XPS results provided direct evidence that the amount of basic hydroxyl groups increased with UV irradiation time, which could be one of the key mechanisms underlying their improved bioactivity.

Behavior of osteoblasts on TI surface with two different coating designed for orthodontic devices

In the present study we coated Ti surfaces with polytetrafluorethylene (PTFE) and titanium nitride (TiN) and investigated in vitro the behavior of osteoblasts on these surfaces. MG-63 osteoblasts were cultured on titanium discs with different surface treatment: uncoated Ti6Al4V, TiN-coated, PTFE-coated. Cell viability/proliferation was detected by MTT assay. Gene-expression levels of alkaline phosphatase (ALP), osteocalcin (OC), type I collagen, receptor activator of nuclear factor-kappa-B ligand (RANKL), and osteoprotegerin (OPG) were determined by qPCR. Cell behavior on different surfaces was observed by time-lapse microscopy. Cells grown on PTFE-coated Ti surface exhibited delayed surface attachment and decreased proliferation after 48 h. However, after 168 h of culture cells grown on PTFE-coated surface exhibited higher viability/proliferation, higher expression levels of ALP and OC, and higher OPG/RANKL ratio compared to uncoated surface. No effect of TiN-coating on any investigated parameter was found. Our results shows that PTFE coating exhibits no toxic effect on MG-63 cells and slightly stimulates expression of several genes associated with osteogenesis. We propose that PTFE coating could be considered as a possible choice for a surface treatment of temporary skeletal anchorage devices in orthodontics.

Techniques for dental implant nanosurface modifications

PURPOSE

Dental implant has gained clinical success over last decade with the major drawback related to osseointegration as properties of metal (Titanium) are different from human bone. Currently implant procedures include endosseous type of dental implants with nanoscale surface characteristics. The objective of this review article is to summarize the role of nanotopography on titanium dental implant surfaces in order to improve osseointegration and various techniques that can generate nanoscale topographic features to titanium implants.

MATERIALS AND METHODS

A systematic electronic search of English language peer reviewed dental literature was performed for articles published between December 1987 to January 2012. Search was conducted in Medline, PubMed and Google scholar supplemented by hand searching of selected journals. 101 articles were assigned to full text analysis. Articles were selected according to inclusion and exclusion criterion. All articles were screened according to inclusion standard. 39 articles were included in the analysis.

RESULTS

Out of 39 studies, seven studies demonstrated that bone implant contact increases with increase in surface roughness. Five studies showed comparative evaluation of techniques producing microtopography and nanotopography. Eight studies concluded that osteoblasts preferably adhere to nano structure as compared to smooth surface. Six studies illustrated that nanotopography modify implant surface and their properties. Thirteen studies described techniques to produce nano roughness.

CONCLUSION

Modification of dental osseous implants at nanoscale level produced by various techniques can alter biological responses that may improve osseointegration and dental implant procedures.

Preparation of TiO₂ nanoparticles coated with ionic liquids: a supramolecular approach

Coated TiO2 nanoparticles by dicationic imidazolium-based ionic liquids (ILs) were prepared and studied by differential scanning calorimetry (DSC), dynamic light scattering (DLS), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), and scanning electron microscopy (SEM). Three ILs with different hydrophobicity degrees and structural characteristics were used (IL-1, IL-2, and IL-3). The interaction between IL molecules and the TiO2 surface was analyzed in both solid state and in solution. The physical and chemical properties of coated nanoparticles (TiO2 + IL-1, TiO2 + IL-2, and TiO2 + IL-3) were compared to pure materials (TiO2, IL-1, IL-2, and IL-3) in order to evaluate the interaction between both components. Thermal behavior, diffraction pattern, and morphologic characteristics were evaluated in the solid state. It was observed that all mixtures (TiO2 + IL) showed different behavior from that detected for pure substances, which is an evidence of film formation. DLS experiments were conducted to determine film thickness on the TiO2 surface comparing the size (hydrodynamic radius, Rh) of pure TiO2 with coated nanoparticles (TiO2 + IL). Results showed the thickness of the film increased with hydrophobicity of the IL compound. TEM images support this observation. Finally, X-ray diffraction patterns showed that, in coated samples, no structural changes in TiO2 diffraction peaks were observed, which is related to the maintenance of the crystalline structure. On the contrary, ILs showed different diffraction patterns, which confirms the hypothesis of interactions happening between IL and the TiO2 nanoparticles surface.

Osteopontin (OPN) is an important protein to mediate improvements in the biocompatibility of C ion-implanted silicone rubber

Medical device implants are drawing increasing amounts of interest from modern medical practitioners. However, this attention is not evenly spread across all such devices; most of these implantable devices can cause adverse reactions such as inflammation, fibrosis, thrombosis, and infection. In this work, the biocompatibility of silicone rubber (SR) was improved through carbon (C) ion implantation. Scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) results confirmed that these newly generated carbon-implanted silicone rubbers (C-SRs) had large, irregular peaks and deep valleys on their surfaces. The water contact angle of the SR surface decreased significantly after C ion implantation. C ion implantation also changed the surface charge distribution, silicone oxygen rate, and chemical-element distribution of SR to favor cell attachment. The dermal fibroblasts cultured on the surface C-SR grew faster and showed more typical fibroblastic shapes. The expression levels of major adhesion proteins, including talin-1, zyxin, and vinculin, were significantly higher in dermal fibroblasts cultured on C-SR coated plates than in dermal fibroblasts cultured on SR. Those same dermal fibroblasts on C-SRs showed more pronounced adhesion and migration abilities. Osteopontin (OPN), a critical extracellular matrix (ECM) protein, was up-regulated and secreted from dermal fibroblasts cultured on C-SR. Matrix metalloproteinase-9 (MMP-9) activity was also increased. These cells were highly mobile and were able to adhere to surfaces, but these abilities were inhibited by the monoclonal antibody against OPN, or by shRNA-mediated MMP-9 knockdown. Together, these results suggest that C ion implantation significantly improves SR biocompatibility, and that OPN is important to promote cell adhesion to the C-SR surface.

Osteoblasts Interaction with PLGA Membranes Functionalized with Titanium Film Nanolayer by PECVD. In vitro Assessment of Surface Influence on Cell Adhesion during Initial Cell to Material Interaction

New biomaterials for Guided Bone Regeneration (GBR), both resorbable and non-resorbable, are being developed to stimulate bone tissue formation. Thus, the in vitro study of cell behavior towards material surface properties turns a prerequisite to assess both biocompatibility and bioactivity of any material intended to be used for clinical purposes. For this purpose, we have developed in vitro studies on normal human osteoblasts (HOB^®) HOB^® osteoblasts grown on a resorbable Poly (lactide-co-glycolide) (PLGA) membrane foil functionalized by a very thin film (around 15 nm) of TiO₂ (i.e., TiO₂/PLGA membranes), designed to be used as barrier membrane. To avoid any alteration of the membranes, the titanium films were deposited at room temperature in one step by plasma enhanced chemical vapour deposition. Characterization of the functionalized membranes proved that the thin titanium layer completely covers the PLGA foils that remains practically unmodified in their interior after the deposition process and stands the standard sterilization protocols. Both morphological changes and cytoskeletal reorganization, together with the focal adhesion development observed in HOB osteoblasts, significantly related to TiO₂ treated PLGA in which the Ti deposition method described has revealed to be a valuable tool to increase bioactivity of PLGA membranes, by combining cell nanotopography cues with the incorporation of bioactive factors.

Mesenchymal stem cell response to UV-photofunctionalized TiO2coated CoCrMo

UV photofunctionalization of TiO₂coated implant surfaces enhanced markers of cell adhesion. This may prove to be advantageous for orthopaedic implants by supporting the colonisation and adhesion of cells capable of facilitating in bone healing.

Effect of photofunctionalization on fluoride-treated nanofeatured titanium

The objective of this study was to evaluate the effect of ultraviolet light treatment, known as photofunctionalization, on the biological and osseointegration capability of nanofeatured titanium created by a combination of sandblasting and hydrofluoric acid treatment. Titanium samples in disk and cylinder forms were photofunctionalized by treatment with ultraviolet light for 15 min. The nanofeatured surface was converted from hydrophobic to superhydrophilic after photofunctionalization. The strength of osseointegration measured by a biomechanical push-in test in a rat model was stronger for photofunctionalized implants than for untreated implants by 2.2 and 2.3 times, respectively, at the early (week 2) and late (week 4) stages of healing, implying that photofunctionalization did not only accelerate but also increased the degree of osseointegration. Culture studies using bone marrow-derived osteoblasts showed that the attachment, spread, and functional phenotypes of osteogenic cells, such as alkaline phosphatase activity and mineralization, were remarkably increased on photofunctionalized titanium. In conclusion, photofunctionalization substantially increased biological and osseointegration capability of a nanofeatured titanium surface. In light with proven effectiveness on microfeatured surfaces in the literature, photofunctionalization may provide a novel and practical avenue to further improve osseointegration capability of implants in a wide range of surface morphology with micro-to-nano features.

The effects of different wavelength UV photofunctionalization on micro-arc oxidized titanium

Many challenges exist in improving early osseointegration, one of the most critical factors in the long-term clinical success of dental implants. Recently, ultraviolet (UV) light-mediated photofunctionalization of titanium as a new potential surface treatment has aroused great interest. This study examines the bioactivity of titanium surfaces treated with UV light of different wavelengths and the underlying associated mechanism. Micro-arc oxidation (MAO) titanium samples were pretreated with UVA light (peak wavelength of 360 nm) or UVC light (peak wavelength of 250 nm) for up to 24 h. UVC treatment promoted the attachment, spread, proliferation and differentiation of MG-63 osteoblast-like cells on the titanium surface, as well as the capacity for apatite formation in simulated body fluid (SBF). These biological influences were not observed after UVA treatment, apart from a weaker effect on apatite formation. The enhanced bioactivity was substantially correlated with the amount of Ti-OH groups, which play an important role in improving the hydrophilicity, along with the removal of hydrocarbons on the titanium surface. Our results showed that both UVA and UVC irradiation altered the chemical properties of the titanium surface without sacrificing its excellent physical characteristics, suggesting that this technology has extensive potential applications and merits further investigation.

Hybrid micro/nano-topography of a TiO2 nanotube-coated commercial zirconia femoral knee implant promotes bone cell adhesion in vitro

Various approaches have been studied to engineer the implant surface to enhance bone in-growth properties, particularly using micro- and nano-topography. In this study, the behavior of osteoblast (bone) cells was analyzed in response to a titanium oxide (TiO2) nanotube-coated commercial zirconia femoral knee implant consisting of a combined surface structure of a micro-roughened surface with the nanotube coating. The osteoblast cells demonstrated high degrees of adhesion and integration into the surface of the nanotube-coated implant material, indicating preferential cell behavior on this surface when compared to the bare implant. The results of this brief study provide sufficient evidence to encourage future studies. The development of such hierarchical micro- and nano-topographical features, as demonstrated in this work, can provide insightful designs for advanced bone-inducing material coatings on ceramic orthopedic implant surfaces.

Light induced hydrophilicity and osteoblast adhesion promotion on amorphous TiO2

We have studied the effect of the UV induced superhydrophilic wetting of TiO(2) thin films on the osteoblasts cell adhesion and cytoskeletal organization on its surface. To assess any effect of the photo-catalytic removal of adventitious carbon as a factor for the enhancement of the osteoblast development, 100 nm amorphous TiO(2) thin layers were deposited on polyethylene terephthalate (PET), a substrate well known for its poor adhesion and limited wettability and biocompatibility. The TiO(2) /PET materials were characterized by X-ray photoelectron spectroscopy, and atomic force microscopy and their wetting behavior under light illumination studied by the sessile drop method. The amorphous TiO(2) thin films showed a very poor photo-catalytic activity even if becoming superhydrophilic after illumination. The illuminated samples recovered partially its initial hydrophobic state only after their storage in the dark for more than 20 days. Osteoblasts (HOB) were seeded both on bare PET and on TiO(2) /PET samples immediately after illumination and also after four weeks storage in darkness. Cell attachment was much more efficient on the immediately illuminated TiO(2)/PET samples, with development of focal adhesions and cell traction forces. Although we cannot completely discard some photo-catalytic carbon removal as a factor contributing to this cell enhanced attachment, our photodegradation experiments on amorphous TiO(2) are conclusive to dismiss this effect as the major cause for this behavior.

Bifunctional polyethersulfone hollow fiber with a porous, single-layer skin for use as a bioartificial liver bioreactor

A bioartificial liver bioreactor requires a bifunctional hollow fiber that is hemocompatible on one side and cytocompatible on the other side. In this study, we developed a single-layer skin polyethersulfone (PES) hollow fiber with smooth inner surface and rough/porous outer surface for an artificial liver bioreactor. The hemocompatibility of the inner surface was evaluated by hemolysis, complement activation and clotting time. The cytocompatibility of the outer surface with HepG2 cells was examined by morphology, proliferation and liver-specific functions. The inner surface of the PES hollow fiber exhibited lower hemolysis and complement activation than cellulose acetate (CA) hollow fiber and a prolonged blood coagulation time. HepG2 cells readily adhered to the outer surfaces of the PES hollow fibers, and proliferated to form multicellular aggregates with time. Furthermore, HepG2 cells cultured on the outer surface of the PES hollow fiber exhibited higher proliferation ability and liver-specific functions than those grown on the CA hollow fiber. These results suggest that the single-layer skin PES hollow fiber is a bifunctional hollow fiber with good hemocompatibility on the inner side and cytocompatibility on the outer side. Thus, porous and single-layer skin PES hollow fibers may have potential as materials for an artificial liver bioreactor.

Bioactivity of nanostructure on titanium surface modified by chemical processing at room temperature

PURPOSE

Recently, there has been considerable interest in finding novel applications and functions for existing dental materials. We found that, at room temperature and atmospheric pressure, titanium oxide spontaneously generates nanostructures very similar to the "nanotubes" created by TiO(2) sputtering. The aim of this study was to evaluate the ability of this surface to affect the cellular osteogenic differentiation response.

METHODS

Titanium disks without and with a 'nanosheet' deposited on their surface were used as the control and test groups, respectively. Cell culture experiments were performed with SD rat bone marrow cells, which were seeded into microplate wells and cultured in media designed to induce osteogenic differentiation. We measured alkaline phosphatase (ALP) activity, osteocalcin (OCN) production, calcium deposition and Runx2 gene expression to assess the levels of differentiation.

RESULTS

After 14 and 21 days, cellular ALP activity was significantly higher in the test group than in the control group. After 28 days, cells in the test group also showed significantly more calcium deposition and OCN production than those in the control group. There was significantly different expression of Runx2 mRNA in the test group compared to the control group after 3 days of culture.

CONCLUSION

In conclusion, these data suggest that titanium implants modified by the application of nanostructures promote osteogenic differentiation, and may improve the biointegration of these implants into the alveolar bone.

Biological response of endothelial cells to diamond-like carbon-coated NiTi alloy

Diamond-like carbon (DLC) coatings were deposited on nearly equiatomic nickel-titanium (NiTi) alloy by arc-enhanced magnetron sputtering. The microstructure, surface morphology, chemical composition, surface free energy, protein adsorbance, and leach amount of Ni ions were assessed by Raman spectroscopy, high-resolution transmission electron microscopy (HR-TEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), contact angle measurements, micro BCA™ protein assay kit, and inductively coupled plasma mass spectrometry (ICP-MS). The biological response of the endothelial cells (ECs) was evaluated by cell adhesion, morphology, viability, and expression levels of thrombogenicity-related genes. Our results show that the DLC coatings inhibit the release of Ni ions from the NiTi substrate effectively thus enhancing its biosafety. The easy adhesion, elongated morphology, and high viability of ECs on the DLC coatings suggest fast endothelialization after implantation and so application of DLC coatings improves the surface properties of NiTi in cardiovascular applications. The relationship between the surface characteristics, Ni leaching, and concomitant biological response are discussed in details.

Nanometer-thin TiO₂ enhances skeletal muscle cell phenotype and behavior

Background

The independent role of the surface chemistry of titanium in determining its biological properties is yet to be determined. Although titanium implants are often in contact with muscle tissue, the interaction of muscle cells with titanium is largely unknown. This study tested the hypotheses that the surface chemistry of clinically established microroughened titanium surfaces could be controllably varied by coating with a minimally thin layer of TiO₂ (ideally pico-to-nanometer in thickness) without altering the existing topographical and roughness features, and that the change in superficial chemistry of titanium is effective in improving the biological properties of titanium.

Methods and results

Acid-etched microroughened titanium surfaces were coated with TiO₂ using slow-rate sputter deposition of molten TiO₂ nanoparticles. A TiO₂ coating of 300 pm to 6.3 nm increased the surface oxygen on the titanium substrates in a controllable manner, but did not alter the existing microscale architecture and roughness of the substrates. Cells derived from rat skeletal muscles showed increased attachment, spread, adhesion strength, proliferation, gene expression, and collagen production at the initial and early stage of culture on 6.3 nm thick TiO₂-coated microroughened titanium surfaces compared with uncoated titanium surfaces.

Conclusion

Using an exemplary slow-rate sputter deposition technique of molten TiO₂ nanoparticles, this study demonstrated that titanium substrates, even with microscale roughness, can be sufficiently chemically modified to enhance their biological properties without altering the existing microscale morphology. The controllable and exclusive chemical modification technique presented in this study may open a new avenue for surface modifications of titanium-based biomaterials for better cell and tissue affinity and reaction.

Effects of UV photofunctionalization on the nanotopography enhanced initial bioactivity of titanium

This study addresses the control of the biological capabilities of titanium through specific nanosurface features and its potential modulation by UV photofunctionalization. Rat bone marrow derived osteoblasts were cultured on titanium disks with micropits alone, micropits with 100 nm nodules, micropits with 300 nm nodules, or micropits with 500 nm nodules, with or without UV treatment. After a 24 h incubation protein adsorption, as well as the attachment, retention, and spread of osteoblasts were examined in correlation with the topographical parameters of the titanium substrates. Each of the biological events was governed by a different set of multiple surface topographical factors with a distinctive pattern of regulation. For instance, without UV treatment the protein adsorption and cell attachment capability of titanium substrates increased linearly with increasing average roughness (Ra) and surface area of titanium disks, but increased polynomially with increasing nanonodule diameter. The cell retention capability increased polynomially with increasing nanonodular diameter and Ra, but increased linearly with increasing surface area. Consequently, the micropits with 300 nm nodules created the most favorable environment for this initial osteoblast behavior and response. UV treatment of the nanonodular titanium surfaces resulted in considerable enhancement of all biological events. However, the pattern of UV-mediated enhancement was disproportionate; exponential and overriding effects were observed depending upon the biological event and topographical parameter. As an example of overriding enhancement, the cell retention capability, which fluctuated with changes in various topographical parameters, became invariably high after UV treatment. The present data provide a basis for understanding how to optimize nanostructures to create titanium surfaces with increased biological capabilities and uncover a novel advantage of UV photofunctionalization of titanium substrates that synergistically increases its nanotopography enhanced biological capabilities whereby most of the initial biological events of osteoblasts were overwhelmingly enhanced beyond a simple proportional increase.

TiO2 micro-nano-hybrid surface to alleviate biological aging of UV-photofunctionalized titanium

Bioactivity and osteoconductivity of titanium degrade over time after surface processing. This time-dependent degradation is substantial and defined as the biological aging of titanium. UV treatment has shown to reactivate the aged surfaces, a process known as photofunctionalization. This study determined whether there is a difference in the behavior of biological aging for titanium with micro-nano-hybrid topography and titanium with microtopography alone, following functionalization. Titanium disks were acid etched to create micropits on the surface. Micro-nano-hybrid surfaces were created by depositioning 300-nm diameter TiO₂ nodules onto the micropits using a previously established self-assembly protocol. These disks were stored for 8 weeks in the dark to allow sufficient aging, then treated with UV light for 48 hours. Rat bone marrow–derived osteoblasts were cultured on fresh disks (immediately after UV treatment), 3-day-old disks (disks stored for 3 days after UV treatment), and 7-day- old disks. The rates of cell attachment, spread, proliferation, and levels of alkaline phosphatase activity, and calcium deposition were reduced by 30%–50% on micropit surfaces, depending on the age of the titanium. In contrast, 7-day-old hybrid surfaces maintained equivalent levels of bioactivity compared with the fresh surfaces. Both micropit and micro-nano-hybrid surfaces were superhydrophilic immediately after UV treatment. However, after 7 days, the micro-nano- hybrid surfaces became hydrorepellent, while the micropit surfaces remained hydrophilic. The sustained bioactivity levels of the micro-nano-hybrid surfaces were nullified by treating these surfaces with Cl⁻anions. A thin TiO₂ coating on the micropit surface without the formation of nanonodules did not result in the prevention or alleviation of the time-dependent decrease in biological activity. In conclusion, the micro-nano-hybrid titanium surfaces may slow the rate of time-dependent degradation of titanium bioactivity after UV photofunctionalization compared with titanium surfaces with microtopography alone. This antibiological aging effect was largely regulated by its sustained electropositivity uniquely conferred in TiO₂ nanonodules, and was independent of the degree of hydrophilicity. These results demonstrate the potential usefulness of these hybrid surfaces to effectively utilize the benefits of UV photofunctionalization and provide a model to explore the mechanisms underlying antibiological aging properties.

Synergistic effects of UV photofunctionalization and micro-nano hybrid topography on the biological properties of titanium

Titanium surfaces with micro-nano hybrid topography (nanoscale nodules in microscale pits) have been recently demonstrated to show higher biological capability than those with microtopography alone. On the other hand, UV treatment of titanium surfaces, which is called UV photofunctionalization, has recently been introduced to substantially increase the biological capability and osteoconductivity of titanium surfaces. However, synergistic effects of these two advanced surface modification technologies and regulatory factors to potentially modulate the mutual effects have never been addressed. In this study, utilization of a recently discovered controllable self-assembly of TiO(2) nanonodules has enabled the exploration of the relative contribution of different sizes of nanostructures to determine the biological capability of titanium surfaces and their relative responsiveness to UV photofunctionalization. Rat bone marrow-derived osteoblasts were cultured on titanium disks with either micropits alone, micropits with 100-nm nodules, micropits with 300-nm nodules, or micropits with 500-nm nodules, with or without UV treatment. Although UV treatment increased the attachment, spread, proliferation, and mineralization of these cells on all titanium surfaces, these effects were more accentuated (3-5 times) on nanonodular surfaces than on surfaces with micropits alone and were disproportionate depending on nanonodule sizes. For instance, on UV-treated micro-nano hybrid surfaces, cell attachment correlated with nanonodule sizes in a quadratic approximation with its peak for 300-nm nodules followed by a decline for 500-nm nodules, while cell attachment exponentially correlated with surface roughness with its plateau achieved for 300-nm nodules without a subsequent decline. Moreover, cell attachment increased in a linear correlation with the surface area, while no significant effect of the inter-irregularities space or degree of hydrophilicity was observed on cell attachment. These results suggest that the effect of UV photofunctionalization can be multiplied on micro-nano hybrid titanium surfaces compared with the surfaces with micropits alone. This multiplication is disproportionately regulated by a selected set of topographical parameters of the titanium surfaces. Among the nanonodules tested in this study, 300-nm nodules seemed to create the most effective morphological environment for responding to UV photofunctionalization. The data provide a systematic platform to effectively optimize nanostructures on titanium surfaces in order to enhance their biological capability as well as their susceptibility to UV photofunctionalization.