Incorrect measurements and misleading conclusions in the article "Comparison of the efficacy of tooth alignment among lingual and labial brackets: an in vitro study"

Background/objective

To reproduce the methods and results of the study by Alobeid et al. (2018) in which the efficacy of tooth alignment using conventional labial and lingual orthodontic bracket systems was assessed.

Materials/methods

We used the identical experimental protocol and tested (i) regular twin bracket (GAC-Twin [Dentsply]) and lingual twin bracket systems (Incognito [3M]), (ii) together with NiTi 0.014” wires (RMO), and (iii) a simulated malocclusion with a displaced maxillary central incisor in the x-axis (2 mm gingivally) and in the z-axis (2 mm labially).

Results

The method described by Alobeid et al. (2018) is not reproducible, and cannot be used to assess the efficacy of tooth alignment in labial or lingual orthodontic treatment. Major flaws concern the anteroposterior return of the Thermaloy-NiTi wire ligated with stainless steel ligatures. The reproduced experimental setting showed that a deflected Thermaloy-NiTi wire DOES NOT move back at all to its initial stage (= 0 per cent correction) because of friction and binding (see supplemented video), neither with the tested labial nor with the lingual brackets. Furthermore, an overcorrection of up to 138 per cent, which the authors indicate for some labial bracket-wire combinations and which deserves the characterization “irreal”, stresses the inappropriateness of the method of measurement.Further flaws include: a) incorrect interpretation of the measurement results, where a tooth tripping around (overcorrection) is interpreted as a better outcome than a perfect 100 per cent correction; b) using a statistical test in an inappropriate and misleading way; c) uncritical copying of text passages from older publications to describe the method, which do not correspond to this experimental protocol and lead to calculation errors; d) wrong citations; e)differences in table and bar graph values of the same variable; f) using a lingual mushroom shaped 0.013” Thermaloy-NiTi wire which does not exist; g) drawing uncritical conclusions of so called "clinical relevance" from a very limited in vitro testing.

Conclusions

Clinical recommendations based on in vitro measurements using the Orthodontic Measurement and Simulation System (OMSS) should be read with caution.

Does the time-point of orthodontic space closure initiation after tooth extraction affect the incidence of gingival cleft development? A randomized controlled clinical trial

Background

Gingival clefts (GCs) develop frequently during orthodontic space closure and may compromise the treatment outcome. This study assessed whether the time‐point of orthodontic space closure initiation, after permanent tooth extraction, affects the incidence of GC.

Methods

In 25 patients requiring bilateral premolar extraction because of orthodontic reasons, one premolar, chosen at random, was extracted 8 weeks before space closure initiation (“delayed movement,” DM), whereas the contralateral premolar was extracted 1 week before (“early movement,” EM) (“treatment group”). Presence or absence of GC after 3 and 6 months (“time‐point”) was recorded and any association with various parameters (i.e., treatment group, time‐point, gender, jaw, craniofacial growth, gingival biotype, buccal bone dehiscence after extraction, space closure) was statistically assessed.

Results

Twenty‐one patients contributing with 26 jaws were finally included in the analysis. Overall, GCs were frequent after 3 (DM: 53.9%; EM: 69.2%) and 6 months (DM: 76.9%; EM: 88.5%). EM (P = 0.014) and larger space closure within the study period (P = 0.001) resulted in a significantly higher incidence of GC. Further, there was a tendency for GC development in the presence of buccal bone dehiscence (P = 0.052) and thin gingival biotype (P = 0.054). “Fast movers” (herein cases with a tooth movement ≥1 mm per month) developed a GC in >90% of the cases already after 3 months. “Slow movers” developed a GC in 25% and 70% after 3 months and final evaluation, respectively.

Conclusions

GC development is a frequent finding during orthodontic space closure and seems to occur more frequently with early tooth movement initiation and in “fast movers.”

Association between maxillary lateral incisors' root volume and palatally displaced canines: An instrumental variables approach to the guidance theory

OBJECTIVES:

To evaluate association and causation between maxillary lateral incisors' (MxI2) apical root volume (ARV) and palatally displaced canines (PDC).

MATERIALS AND METHODS:

In a retrospective cross-sectional study, computed tomography scans of 179 patients with unilateral PDC were analyzed. MxI2 root length and volume on the impaction and eruption side were measured. A mixed logit model was used to infer the association between ARV and PDC and an instrumental variables approach to interpret causality.

RESULTS:

MxI2 root length on the impaction side was shorter in 42%, equal in 33% and longer in 25% of the patients. ARV amounted for 13.5% of total root volume on the impaction and 14.9% on the eruption side. Reduced ARV was significantly associated with the impaction side ( P < .001). The causal effect of ARV on PDC in the instrumental variable approach amounted to less than half of the association in a standard noncausal approach.

CONCLUSIONS:

An association between PDC and reduced MxI2 root length and volume was confirmed. However, the lack of causality did not allow the researchers to draw a conclusion as to whether a reduced ARV is causing PDC or resulting from it; this should be considered in etiologic theories.

Comparison of Skeletal and Dental Reference Planes with the Hamulus-Incisive-Papilla Plane: A Pilot Study on 3D Reconstructed Tomographies of the Skull

PURPOSE

The aim of this study was to investigate the hamulus-incisive-papilla (HIP) plane as an alternative for transferring the three-dimensional position of a patient's maxilla to an articulator.

MATERIALS AND METHODS

Camper, Frankfurt horizontal, occlusal, and HIP planes were evaluated in 21 patients' computed tomography scans and compared to one another.

RESULTS

Analysis of variance showed significant differences between all planes, with the HIP plane being closest to the occlusal plane (HIP-OP: 0.6 ± 4.0 degrees). Frankfurt and Camper planes, being more peripheral, showed higher geometric asymmetries.

CONCLUSION

The HIP plane, when used for articulator mounting, results in a closer and more technically reliable patient relationship in a clinical and laboratory context.

Behavior of osteoblasts on TI surface with two different coating designed for orthodontic devices

In the present study we coated Ti surfaces with polytetrafluorethylene (PTFE) and titanium nitride (TiN) and investigated in vitro the behavior of osteoblasts on these surfaces. MG-63 osteoblasts were cultured on titanium discs with different surface treatment: uncoated Ti6Al4V, TiN-coated, PTFE-coated. Cell viability/proliferation was detected by MTT assay. Gene-expression levels of alkaline phosphatase (ALP), osteocalcin (OC), type I collagen, receptor activator of nuclear factor-kappa-B ligand (RANKL), and osteoprotegerin (OPG) were determined by qPCR. Cell behavior on different surfaces was observed by time-lapse microscopy. Cells grown on PTFE-coated Ti surface exhibited delayed surface attachment and decreased proliferation after 48 h. However, after 168 h of culture cells grown on PTFE-coated surface exhibited higher viability/proliferation, higher expression levels of ALP and OC, and higher OPG/RANKL ratio compared to uncoated surface. No effect of TiN-coating on any investigated parameter was found. Our results shows that PTFE coating exhibits no toxic effect on MG-63 cells and slightly stimulates expression of several genes associated with osteogenesis. We propose that PTFE coating could be considered as a possible choice for a surface treatment of temporary skeletal anchorage devices in orthodontics.

Different effects of P. gingivalis LPS and E. coli LPS on the expression of interleukin-6 in human gingival fibroblasts

OBJECTIVE

Gingival fibroblasts (GFs) produce pro-inflammatory cytokines in response to stimulation with lipopolysaccharide (LPS) of Porphyromonas gingivalis, which is thought to be mediated by activation of toll-like receptors (TLR)2 and TLR4. The present study investigated the expression of interleukin (IL)-6, TLR2, and TLR4 in GFs of seven different donors upon stimulation with P. gingivalis LPS. The effects of P. gingivalis LPS were compared with those of TLR4 agonist Escherichia coli LPS and TLR2 agonist Pam3CSK4.

MATERIALS AND METHODS

GFs were stimulated with P. gingivalis LPS, E. coli LPS or Pam3CSK4 and the expression of IL-6, TLR2 and TLR4 was measured by qPCR. The surface expression of TLR2 and TLR4 was measured by flow cytometry.

RESULTS

In GFs from three donors, P. gingivalis LPS and Pam3CSK4 induced a markedly lower increase in IL-6 expression than E. coli LPS. This was accompanied by significant down-regulation of the TLR2 and TLR4 expression. In GFs from another four donors, an increase in IL-6 expression upon stimulation with P. gingivalis LPS and Pam3CSK4 was similar or even higher than that induced by E. coli LPS. In GFs of these donors, all stimuli induced an up-regulation of both mRNA and protein expression of TLR2 and did not influence that of TLR4.

CONCLUSIONS

This study suggests that P. gingivalis LPS and E. coli LPS differently regulate cytokine production in human gingival fibroblasts. Regulation of the expression level of TLR2 and TLR4 by periodontal pathogens might be an important factor controlling the inflammatory response in GFs.

Both 25-hydroxyvitamin-D3 and 1,25-dihydroxyvitamin-D3 reduces inflammatory response in human periodontal ligament cells

Periodontitis is an inflammatory disease leading to the destruction of periodontal tissue. Vitamin D3 is an important hormone involved in the preservation of serum calcium and phosphate levels, regulation of bone metabolism and inflammatory response. Recent studies suggest that vitamin D3 metabolism might play a role in the progression of periodontitis. The aim of the present study was to examine the effects of 25(OH)D3, which is stable form of vitamin D3 in blood, and biologically active form 1,25(OH)2D3 on the production of interleukin-6 (IL-6), interleukin-8 (IL-8), and monocyte chemotactic protein-1 (MCP-1) by cells of periodontal ligament. Commercially available human periodontal ligament fibroblasts (hPdLF) and primary human periodontal ligament cells (hPdLC) were used. Cells were stimulated with either Porphyromonas gingivalis lipopolysaccharide (LPS) or heat-killed P. ginigvalis in the presence or in the absence of 25(OH)D3 or 1,25(OH)2D3 at concentrations of 10-100 nM. Stimulation of cells with either P. gingivalis LPS or heat-killed P. gingivalis resulted in a significant increase of the expression levels of IL-6, IL-8, and MCP-1 in gene as well as in protein levels, measured by qPCR and ELISA, respectively. The production of these pro-inflammatory mediators in hPdLF was significantly inhibited by both 25(OH)D3 and 1,25(OH)2D3 in a dose-dependent manner. In primary hPdLCs, both 25(OH)D3 and 1,25(OH)2D3 inhibited the production of IL-8 and MCP-1 but have no significant effect on the IL-6 production. The effect of both 25(OH)D3 and 1,25(OH)2D3 was abolished by specific knockdown of vitamin D3 receptor by siRNA. Our data suggest that vitamin D3 might play an important role in the modulation of periodontal inflammation via regulation of cytokine production by cells of periodontal ligament. Further studies are required for better understanding of the extents of this anti-inflammatory effect and its involvement in the progression of periodontal disease.

Nitric oxide production, systemic inflammation and lipid metabolism in periodontitis patients: possible gender aspect

AIM

Nitric oxide (NO) plays a crucial role in vascular tone regulation and is involved in pathogenesis of periodontitis. In this cross-sectional study, we investigated the serum and saliva levels of NO metabolites in periodontal disease and their relationship with serum C-reactive protein (CRP) levels, lipids metabolism and periodontal disease severity.

MATERIAL AND METHODS

Serum and saliva were collected from non-smoking patients with generalized severe periodontitis (n = 89) and healthy controls (n = 56). Serum and salivary levels of NO metabolites, serum levels of high density lipoproteins (HDL), low density lipoproteins (LDL), triglycerides, cholesterol and CRP were measured. Data were analysed in whole population and in different gender groups.

RESULTS

Periodontitis patients exhibited significantly lower serum and saliva levels of NO metabolites and significantly higher LDL, cholesterol and CRP levels than control group. Similar findings were observed within male but not within female population. Serum NO metabolites levels exhibited significant negative correlation with CRP in whole population and in male population. Significant positive correlation of serum NO metabolite levels with HDL levels was observed in whole population.

CONCLUSION

NO production is reduced in periodontitis, especially in male population. Gender might be an important factor in assessing risk of cardiovascular disease in periodontitis.

Shear bond strength of fluoride-releasing orthodontic bonding and composite materials

Several fluoride-releasing bonding materials are available for orthodontic bracket placement. These are supposed to prevent white spot lesions during therapy. The objectives of this in vitro study were to evaluate the shear bond strength (SBS) and failure mode of a recently introduced fluoride-releasing adhesive, as well as the comparison with established orthodontic adhesives. Sixty bovine mandibular incisors were randomly allocated to three groups (n = 20): stainless steel brackets were bonded with Transbond Plus Color Change Adhesive, Transbond XT, or Light Bond. A universal testing machine was used to determine the SBS at a crosshead speed of 1 mm/minute. After debonding, the adhesive remnant index (ARI) was used to assess the adhesive remaining on the brackets. One-way analysis of variance comparing the three experimental groups showed no differences between the bonding systems for mean SBS (P = 0.27). ARI scores showed more residual adhesive on the teeth bonded with the Transbond systems (P < 0.01). As the fluoride-releasing bonding system provided sufficient mean bond strength in vitro (19.9 MPa), it may be used as an additional prophylactic measure in orthodontic therapy. However, the clinical effectiveness of its fluoride release may be questionable, as the amount of fluoride required from a bonding material to be caries preventive is still unknown.

Evaluation of force systems from a "free-end" force system

INTRODUCTION

The purpose of this study was to investigate the biomechanical characteristics of a V-bend wire configuration in a free-end system, ie, with 1 end mounted in an orthodontic tube and the other loosely ligated to a bracket. The effects of V-bend position and size, wire dimension, method of ligation, and the inclusion of a second wire in the system were examined.

METHODS

Samples of various wire configurations were mounted in a bench testing machine to measure moments and forces at both ends in a standardized configuration resembling a 2-premolar extraction clinical case incorporating a special bracket with a second, frictionless slot. The position of the V-bend was altered in 1.0-mm intervals.

RESULTS

Moments were created at the posterior end, resulting in intrusive forces anteriorly that induced moments on the anterior block. The sizes of the moments and forces were increased in connection with posterior positioning of the V-bend, increase in the wire dimension and the V-bend sizes, although they were reduced and stabilized by the inclusion of a second nickel-titanium wire. The double wire system created clinically revelant moments and forces.

CONCLUSIONS

The V-bend in a free-end system can create variable moments and forces that can be used clinically in intrusion and space-closing procedures but should be measured and monitored closely.

Sagittal and vertical load-deflection and permanent deformation of transpalatal arches connected with palatal implants: an in-vitro study

INTRODUCTION

The purposes of this laboratory investigation were to (1) measure the sagittal and vertical deflection of loaded transpalatal arches (TPAs) connected to a palatal implant, (2) measure the extent of permanent deformation of the connecting TPA in the sagittal and vertical directions, (3) test various wire dimensions in terms of deflection behavior, and (4) evaluate soldering vs laser welding vs adhesive bonding of TPAs in terms of load deflection behavior.

METHODS

Stainless steel wires of 6 dimensions were tested: 0.8 x 0.8, 0.9, 1, 1.1, 1.2, and 1.2 x 1.2 mm. For each dimension, 10 specimens were soldered to the palatal implant abutment, 10 were laser welded, and 10 were adhesively bonded to the implant abutment (total, 180 specimens). The measuring device applied increments of force of 50 cN, from 0 to 500 cN. Then the specimens were unloaded. The values were statistically described and analyzed with ANOVA and Wilcoxon rank sum tests.

RESULTS AND CONCLUSIONS

Absolute orthodontic anchorage without deformation of TPAs was not observed with the wire dimensions tested. To prevent loss of anchorage greater than 370 mum (sagittal deflection of 1.2 x 1.2 mm adhesively bonded TPA at 500 cN force level), wires thicker than 1.2 x 1.2 mm or cast anchorage elements must be considered for clinical practice. However, larger cross sections might cause more patient discomfort, and laboratory procedures increase costs.

Evaluation of the effects of rapid maxillary expansion in growing children using computer tomography scanning: a pilot study

The principle of rapid maxillary expansion (RME) as a method to expand the transverse dimension of the palate and maxillary dental arch is by no means new, and previous studies have reported the effects of the method using a variety of radiographic methods. In the present study, the effect of a Hyrax splint appliance was studied in a group of nine growing children (six females, three males; mean age 8 years 1 month) undergoing orthodontic treatment. The changes were evaluated on pre- and post-treatment computer tomographic scans taken using a low-dosage protocol. The results demonstrated a clear appliance-induced effect in all patients, although the relative contribution of dental, alveolar, and skeletal changes varied from subject to subject. The average expansion, measured at the molar crowns, was 3.6 mm, whereas the actual sutural opening, the main aim of RME, was as low as 1.6 mm. The findings of this study raise doubts as to the efficiency of the Hyrax appliance and further comparative studies are recommended to evaluate other methods of maxillary expansion.

Ninety percent success in palatal implants loaded 1 week after placement: a clinical evaluation by resonance frequency analysis

To investigate the behaviour of early loaded palatal implants when observed with resonance frequency analysis (RFA). Twenty patients (seven males and 13 females, mean age 26.4 years) received one palatal implant each (length: 4 mm, diameter: 3.3 mm; Orthosystem) for maximum orthodontic anchorage. The implants' stability was observed by RFA. Measurements were carried out at the time of surgery, after first orthodontic loading and subsequently once a week over a period of 12 weeks. Two palatal implants were lost. The other 18 remained stable. The average period from insertion to first loading was 6.7+/-0.8 days. The mean orthodontic force applied was 272.2+/-73.2 cN. The implant stability quotient (ISQ) value at the time of surgery averaged 69.4+/-3.9. The mean ISQ value 6.7 days after insertion was 69.8+/-3.6. Twelve weeks post-surgery the mean ISQ value was 69.8+/-3.5. A statistically significant decrease in stability was observed after 2 and 3 weeks post-surgery (P=0.005 and 0.04). The behaviour of early loaded palatal implants showed an initial decrease of the ISQ values. From 6 weeks post-surgery onward the ISQ values increased. Within the limitations of this study, the results suggest that the healing time of palatal implants reported in the literature (12 weeks) should be discussed. An orthodontic loading of palatal implants 6 weeks post-surgery with a force up to 400 cN seems to be justified. Yet further investigations are necessary to evaluate the behaviour of early loaded palatal implants considering observation periods of over 12 weeks.

Nasal cavity perforation by palatal implants: false-positive records on the lateral cephalogram

PURPOSE

Lateral cephalometric films were examined for their validity as a tool for the postoperative evaluation of palatal implant placement.

MATERIALS AND METHODS

Cephalometric and histometric data of 20 partially edentulous human cadaveric maxillae were compared. Lateral cephalograms of the specimens were made, and the palatal complex was pencil traced. In addition, low-dose dental computerized tomography (CT) scans were obtained from every specimen. Based on the CT data, palatal implants (Orthosystem; Institut Straumann, Waldenburg, Switzerland) were placed. Postimplantation, another lateral cephalometric film was recorded. The specimens were prepared for histologic examination. The preoperative tracings were superimposed on the postoperative cephalometric films.

RESULTS

Of 20 implants placed, 12 were 4 mm long and 8 were 6 mm long. The distance between the cranial end of the implants and the nasal floor on microscopy ranged from 0.3 to 9.3 mm. Perforation of the nasal floor was absent throughout on intraoperative probing, while 2 implants projected beyond the nasal floor on histologic analysis of the specimens. An analysis of the superimposed pre- and postoperative cephalograms showed 5 implants projecting beyond the nasal floor. Histologically, only 1 of these projecting implants had actually caused perforation of the palatal complex. A comparison between the histometric and the cephalometric data showed that cephalometry, on average, imaged the palatal complex 0.8 mm below the actual anatomic site.

DISCUSSION AND CONCLUSIONS

Twenty percent of palatal implants projecting beyond the nasal floor were false-positive records on the postoperative lateral cephalograms. Despite CT scans, 10% of the implants placed caused fenestration of the nasal cavity by histologic evidence. If the palatal complex was perforated, intraoperative probing with a periodontal probe did not confirm the perforation. Bone perforations up to 1.3 mm did not necessarily result in frank perforation of the nasal mucosa. Two-dimensional images could not be related to actual penetrations into the nasal cavity.

Quantitation of transverse maxillary dimensions using computed tomography: a methodological and reproducibility study

The present investigation was a methodological study of a new method of quantification of a series of factors in the transverse dimension of the maxilla including the nose, maxillary bones and dental arches, based on computer tomographic (CT) scanning. The aim was to investigate a series of parameters thought to be relevant in the differential diagnosis of discrepancies in the morphology of this area and probably affected by orthodontic appliances. Based on a standardized CT scanning registration of 10 subjects, a series of points on the scans were identified and then measured in a special cephalometric computer system (linear and angular values). The quantitation was repeated by each observer and inter- and intra-observer differences were calculated. The results demonstrated that virtually all the parameters showed a high degree of reproducibility at both levels and confirmed the statistical suitability of the method described. The method will be used in a series of ongoing studies regarding the morphology and treatment of discrepancies of the midface and therefore supplement the relatively sparse information based on quantitative reports concerning this important anatomical area.

Bone regeneration by bodily tooth movement: dental computed tomography examination of a patient

A 32-year-old man was examined with computed tomography before and after orthodontic treatment, and alveolar bone levels at the edentulous spaces were assessed. When the computed tomography scans were compared, 2.2 to 5.2 mm of additional craniocaudal alveolar bone remodeling by bodily tooth movement was found in the space-opening region. Bodily movement was achieved with single- and crossed-lever-arm mechanics. Root resorption measuring 1 to 4 mm was observed at the mandibular anterior region, where teeth were used for anchorage to upright the molars.

An improved transpalatal bar design. Part I. Comparison of moments and forces delivered by two bar designs for symmetrical molar derotation

Moments and forces delivered during symmetrical derotation of upper molars by 10 Goshgarian-type (GTPB) and 10 Zachrisson-type transpalatal bars (ZTPB) were measured in laboratory experiments using a computer-based strain gauge. The bar passivity in sagittal, transverse, and vertical planes was first assessed at the measurement apparatus. Then each end of the 20 passive bars was symmetrically activated by 10 mm in the sagittal plane using a template. The activated bars were placed into lingual attachments of the measuring apparatus, and three consecutive measurement steps were done for each bar. Measurements were made when the attachments were at 0 degrees, 5 degrees, and 10 degrees of deactivation. The mesiodistal (sagittal) forces, the horizontal forces, and the moments of rotation at the right and left attachments were measured at each step. The horizontal forces and the moments of rotation of the two designs had statistically significant differences. Greater moments of rotation were produced by the GTPB. The ZTPB produced significantly lower contractive horizontal forces than did the GTPB at 5 degrees and 10 degrees of deactivation.

An improved transpalatal bar design. Part II. Clinical upper molar derotation--case report

Bilaterally rotated upper first molars (mesial in, distal out) were derotated in two different cases by using a custom-made transpalatal bar. The bars were reactivated, if necessary, at four-week controls. The derotations were fully corrected after about three months.

The efficacy of anterior repositioning splint therapy studied by magnetic resonance imaging

Magnetic resonance images (MRIs) were obtained of 52 temporomandibular joints (TMJs) of 30 patients with TMJ disease, before insertion of an anterior repositioning splint. Ten TMJs showed a normal disc-condyle relationship. Pathological findings were partial or complete anterior disc displacement with disc reduction (n = 18), without (n = 7), or with partial reduction (n = 4) or non-reducing joints combined with osteoarthrosis (n = 13). Associated clinical findings were joint clicking, painful TMJ movements with or without condyle limitation, deviation, or crepitus. The clinical evaluation when compared with the MRIs correlated in 75 per cent of cases. Immediate post-insertion MRIs showed recapture of discs with a protrusive splint in 15 out of 18 reducing displacements. Recapture of the disc was seen in only two out of four joints with anterior disc displacement with partial disc reduction. There was no recapture in non-reducing joints. In severe cases of internal derangement with a wide range of disc displacement combined with changes of the osseous joint surfaces, the recapturing of the articular disc with an anterior repositioning appliance was unsuccessful (0 of 13). The follow-up for pain relief after one week showed a significant reduction of symptoms, despite the fact that recapture of the dislocated disc occurred in only 17 of the 42 pathological TMJs. The possibility for disc recapture depends on the disc-condyle position and configuration, the integrity of the posterior attachment, and the degree of degenerative changes of the intra-articular structures, such as osteophytosis, condylar erosion, or flattening of the articular disc. This diagnostic information influences the method of treatment of TMJ disorders. In non-reducing joints or in the later stages of internal derangement of the TMJ, it is not possible to achieve a normal disc-condyle relationship using protrusive splints.

Chair-side procedure for connecting transpalatal arches with palatal implants

The present investigation examined a chair-side procedure for connecting a transpalatal arch (TPA) with palatal implants, which does not involve any laboratory work. This new technique was compared with the standard procedure in terms of the number of steps, the time required, and the cost. The total chair-side time needed with the standard procedure was 38 minutes, with the material costs amounting to [symbol: see text] 159.6. With the chair-side procedure the total time required was 55 minutes, and the cost of the material totalled [symbol: see text] 34.1. The chair-side procedure was derived from orthodontic treatment concepts and is independent of laboratory input. Its major advantage is that it does not require transfers, which necessitate additional steps. These steps, which are inevitable with the standard procedure, resulted in an unexpectedly high cost level and increased the total cost. The difference in the cost of the material between the two procedures amounted to [symbol: see text] 125.5 and timewise the difference was 17 minutes. Whilst TPA-implant connections can be made with both the standard and chair-side procedures, the standard procedure, although taking considerably less chair-side time, was four times more expensive than the chair-side procedure.

Short epithetic implants for orthodontic anchorage in the paramedian region of the palate. A clinical study

Orthodontic movement of teeth often requires maximum anchorage, so that additional resistance must be added to teeth to avoid reaction to reciprocal forces. Thus, use of endosseous implants may be a valuable alternative for ensuring stable intraoral anchorage. This study was designed to evaluate the efficacy of short epithetic implants for orthodontic anchorage in the paramedian region of the palate. Twenty-one patients (15 female, 6 male; mean age 25.8+/-9.9 yrs, min 12.7, max. 48.1) were included in this study. Following adequate preoperative planning, an implant system with reduced length, which had already been used for anchorage of epitheses, was placed in the paramedian region avoiding the anterior palatine suture. After a mean period of 4 months with unloaded healing, the implants were subjected to direct or indirect orthodontic loading. Despite varying bone quality and varying vertical bone volume in this region, adequate primary stability was achieved for all of the implants. No implant was lost during the healing period. Three out of the 21 implants placed were considered as failures. Two implants loosened shortly after the start of orthodontic loading. One of these was lost at a later stage due to peri-implant inflammation, while the other one was left in place during the 9-month follow-up period because no inflammation developed and this implant is still indirectly included in the orthodontic treatment. Another implant loosening was observed after 8.5 months following direct loading with 8 N. This implant was also lost due to peri-implant inflammation. The time-related survival probability was 84.8% after 22.9 months. As yet, 4 implants have been removed due to completion of orthodontic treatment. The results of this study indicate that short epithetic implants are suitable to achieve maximum anchorage in the paramedian region of the hard palate in orthodontic treatment.

Bicortical titanium screws for critical orthodontic anchorage in the mandible: a preliminary report on clinical applications

Critical anchorage during orthodontic treatment in the mandible needs both time and effort and patient compliance. In 8 patients, 12 bicortical titanium screws (BIS) were used as anchorage units for orthodontic molar protraction. The criteria for patient selection were: critical anchorage in the lower jaw (i.e. retraction of anterior teeth undesirable) and molar extraction sites. After insertion of the screws in local anesthesia, orthodontic forces were applied immediately. One screw worked loose and had to be removed before the end of treatment. Problems encountered included impingement of the screw head and slight inflammatory reactions of the surrounding mobile mucosa, which necessitated premature removal of two screws. After healing, a new insertion site was chosen. Further treatment was uneventful. Anchorage for orthodontic forces as described offers several advantages. The total treatment time is reduced as the screws can be loaded immediately. The line of action of the orthodontic force coincides with the level of the center of resistance of the molar resulting in a favorable translatory tooth movement. Treatment does not depend on patient cooperation.

Functional magnetic resonance imaging of temporomandibular joint disorders

Fifty-eight temporomandibular joints (TMJs) from 40 patients with TMJ-related symptoms were examined by means of magnetic resonance scans with modified gradient echo sequences and a special double coil. This technique yielded a good spatial resolution of the intra-articular soft tissues, especially the articular disc and the bone structure of the TMJ. In combination with an incremental jaw opener, the disc-condyle complex was analysed in various closed and open mouth positions, depending on the clinical examination. Open mouth movement with differentiation of disc-condyle rotational and translation movement was demonstrated. Disturbances of TMJ motion showed interrupted condylar translation combined with mandibular deviation during open mouth movement (n = 8/58). Early phases of internal derangement of the TMJ with partial anterior disc displacement with (n = 12/58) or without (n = 2/58) reduction, total anterior disc displacement without reduction (n = 10/58), disc deformation (n = 10/58), disc adhesion (n = 2/58), condylar hypermobility (n = 6/58), condylar displacement (n = 8/58), and late phases of internal derangement of the TMJ with osteoarthrosis (n = 14/58) were clearly identified. Bilateral TMJ disorder was found in 72.5 per cent of the patients. By using motion-adapted, semi-dynamic magnetic resonance imaging (MRI), it is possible to improve the understanding of the complexity of TMJ movements.

Contemporary treatment of the resorbed avulsed tooth: a case report

This report describes the treatment sequence after traumatic loss of a maxillary central incisor in a 15-year-old patient. Following extraoral root canal treatment and initially successful replantation, the case presented 9 years later with complete root resorption. After augmentation with an autologous mandibular corticocancellous graft, a dental implant was placed in a second stage surgery. The case highlights the challenge facing clinicians in providing the appropriate standard of care for today's treatment options.

Secular trends in malocclusion in Austrian men

A comparison between occlusal deviations in the permanent dentition in the skulls of 94 19th century and 157 present-day Austrian males was made by means of the PAR Index. It was found that the contemporary dentitions showed significantly higher malocclusion scores than the 19th century sample (weighted PAR Index 11.79 and 6.62, respectively). The results show that secular changes in malocclusion have occurred during the last 100 years.

Initial effects of treatment of Class II malocclusion with the Herren activator, activator-headgear combination, and Jasper Jumper

The initial effects of treatment of Class II, Division 1 malocclusion with an activator, according to Herren (27 patients), with an activator-headgear combination (20 patients), or with the Jasper Jumper appliance (25 patients) were studied on lateral cephalograms from before and after 6 to 8 months of treatment. The patients' ages ranged from 9 to 12 years. At the end of the period of observation, the correction in overjet and molar relationship was more complete in the patients with the Jasper Jumper than in the patients with the activator. Whereas all the patients with the Jasper Jumper showed neutral occlusion, this was the case in only 20 of the 47 patients with the activator. The correction of the distal occlusion occurred through a combination of skeletal and dentoalveolar adaptations. Skeletal changes accounted for 42%, 35%, and 48% of the overjet correction by the Herren-type activator, the headgear-activator, and the Jasper Jumper, respectively. The correction of the molar relationship occurred to 55%, 46%, and 38% by skeletal changes in the respective groups. Dentoalveolar compensation (distal movement of the upper molars, mesial movement of the lower molars) appeared to be inversely related to skeletal adaptation. The patients with the Jasper Jumper showed a marked intrusion of the lower incisors with a consequent reduction in overbite.

Evaluation of continuous arch and segmented arch leveling techniques in adult patients--a clinical study

The purpose of this study was to compare the efficacy of overbite correction achieved by a conventional continuous arch wire technique and the segmented arch technique as recommended by Burstone. The sample comprised 50 adult patients (age 18 to 40 years) with deep bites. Twenty-five patients were treated with a continuous arch wire technique (CAW); in the second half of the sample, the segmented arch technique (Burstone) was used for correction of the vertical malocclusion. Lateral cephalograms and plaster cast models taken before and immediately after treatment were evaluated. Statistical analysis was performed on the collected data. The results showed that both techniques produced a highly significant overbite reduction (CAW: -3.17 mm, p < 0.001; Burstone: -3.56 mm, p < 0.001). The CAW group showed an extrusion in the molar area with subsequent posterior rotation of the mandible (6occl-ML: +1.30 mm; 6occl-NSL: +1.63 mm; ML/NSL: +1.94 degrees, all p < 0.001). The Burstone group, however, showed overbite reduction by incisor intrusion without any substantial extrusion of posterior teeth (upper 1-NSL: -1.50 mm; lower 1-ML: -1.72 mm; both p < 0.001). As a consequence, no significant posterior rotation of the mandible took place (ML/NSL: +0.52 degrees, n.s.). It is concluded that in adult patients the segmented arch technique (Burstone) can be considered as being superior to a conventional continuous arch wire technique if arch leveling by incisor intrusion is indicated.

Moments and forces delivered by transpalatal arches for symmetrical first molar rotation

The moments and forces delivered by round transpalatal arches of steel and of beta-titanium (TMA) for symmetrical derotation of molars were studied in laboratory experiments. Three sizes of arches were tested in two series. In the first series, the degree of activation was checked for symmetry in a computer-based strain-gauge measuring system. In the second series, the activation was carried out in a way simulating clinical use. The mesio-distal and transverse forces and the derotating moments at full activation and during derotation in steps of 5 degrees were measured. At full activation, the steel arches delivered relatively large moments which, however, decreased rapidly during deactivation. The TMA arches had a larger working range. It was not possible to achieve full symmetry of the moments at the two ends of the arch. The difference of the two moments resulted in forces acting on the two anchorage teeth in a mesio-distal direction. These forces were generally small but could reach clinically relevant magnitude. The derotation resulted in a contractive force of up to 2.7 N which has to be compensated for by expansion. The mode of activation simulating clinical use resulted in reasonably constant forces and moments. The use of a vice to hold the arch during activation was found to be of great help and is recommended in the clinical setting. Because of the larger working range, TMA arches are recommended if substantial derotation is needed.

Treatment of Class II malocclusions with the Jasper Jumper appliance--a preliminary report

The effect of the Jasper Jumper appliance (American Orthodontics, Sheboygan, Wis.) on the dentofacial complex was studied in 17 consecutive growing patients who had Class II, Division 1 malocclusions. Lateral cephalograms taken before treatment and immediately after removal of the Jumpers were analyzed according to the method of Pancherz. The following results were found: (1) Class I occlusal relationships were achieved in all patients in an average treatment time of 6 months. (2) The correction of the Class II malocclusion was a result of skeletal (40%) and dental (60%) changes. (3) Skeletal Class II correction was predominantly restricted to the mandible. (4) The dentoalveolar part of total molar relationship correction took place to the same extent in both jaws, whereas in overjet correction the maxillary dental changes outweighed the mandibular changes by far. (5) When compared with normal growth changes (Bolton standards), treatment with Jasper Jumpers distalizes the upper dentition and moves the lower teeth mesially. Mandibular growth seems to be increased to some extent. It was concluded that treatment with the Jasper Jumper appliance presents an effective method to correct Class II malocclusion in growing patients.

The centered T-loop--a new way of preactivation

The force system of a prefabricated and preactivated T-loop used for reciprocal space closure was determined by simultaneously measuring the horizontal and vertical forces, as well as the moments using a computer controlled measuring apparatus. Interbracket distances of 21, 24, 27, and 30 mm were used to mimic typical clinical situations. At a loop activation of 7 mm, the anterior and posterior segments first underwent controlled tipping, then translation, and finally, root uprighting as the moment-to-force ratio increased with deactivation. After the loop has been deactivated to 4 mm, however, it should be exchanged to avoid root abutment.

Force delivery from a transpalatal arch for the correction of unilateral first molar cross-bite

The forces and moments delivered by prefabricated transpalatal arches of the makes Unitek, GAC, and Ormco were studied in laboratory experiments. The Unitek and GAC arches were made of steel, and the Ormco arch of beta-titanium alloy (TMA). Three types of activation were investigated: for bilateral expansion in a statically indeterminate system and for unilateral expansion in a statically determinate system with and without torque activation. In addition to the arch design, composition, and mode of activation, the influence of arch size and degree of activation were studied. It was found that activation for unilateral expansion with the inclusion of torque in the statically determinate system produced forces and moments suitable for the correction of a unilateral cross-bite.

[The orthodontic treatment of deep bite in adults--a comparison of the straight-wire appliance and the segmented arch technic]

The purpose of the study was to analyse and compare deep overbite correction in adult patients carried out by a straight wire appliance and the segmented arch technique as recommended by Burstone. The sample comprised 50 adult, deep bite patients, 25 each treated with straight wire appliance and segmented arch technique. Plaster casts and lateral cephalograms made before and immediately after finishing treatment were analysed. Both techniques were successful in overbite correction; overbite reduction amounted to 3 to 3.5 mm. The straight wire appliance group demonstrated predominantly molar extrusion and as a result posterior mandibular rotation. A slight intrusion of 1 mm was seen in the lower incisor area. The segmented arch technique resulted in an incisor intrusion of 1.5 mm in the upper and 1.7 mm in the lower jaw. No substantiate extrusion in the molar area was found. The advantages of this technique are discussed.

[A new method for the quantitative and qualitative measurement of tooth movements]

A new method for the in vivo measurement of the movements of teeth is described. Measuring blocks are attached to brackets and tubes. Calibrated holes are drilled in each side of the blocks. Using an electronic sliding caliper, measurements are made in all three dimensions between moving teeth and blocks of anchored segments. With the aid of a computer programme, these measurements can be used to construct pictures of various teeth. By taking measurements at different stages of treatment, the movements of the teeth can be shown in three-dimensional images.

[The tooth transplant in orthodontic treatment planning]

The analysis of all examined transplant cases combined treated with orthodontics shows a success rate of 76%. It must be underlined that the germ development at the time of the transplantation is of utmost importance. The best possible time proved to be at a root development of 2/3 to 3/4. Exact indication position, a careful atraumatic operation method and a short time of operation are also important factors of a successful transplantation. If all these preconditions are met, this method can be recommended.

[Anterior tooth intrusion with the base arch: preactivation by tip-back bending or curvature?]

Burstone's intrusion mechanics has been found to be effective in the treatment of a deep bite due to intrusion of the anterior teeth. The pre-activation of the intrusion arch by a tip-back bending shows a shortening in the activation. Measurements objectified the extent of the shortening and the resulting horizontal forces for TMA arches of a dimension of 0.017 x 0.025 inch relating to different distances between molars and anterior teeth and pre-activation by means of tip-back bending or curvature. The change of the vertical force in connection with a simulated intrusion of 5 mm was also registered. Clinical consequences of the therapy are discussed.

[The uprighting of mandibular molars during pre-prosthodontic treatment]

The dentist is often confronted with mesially tipped molars in the mandible which make good restorative treatment impossible. Some methods for uprighting molars using partial edgewise appliances are described.

[The effect of the vertical bracket position on the orthodontic finish]

As during orthodontic treatment and in particular during the phase of the precise adjustment of occlusion by applying the "straight-wire technique" problems arise as far as the vertical dimensions are concerned, the usual distances between the bracket slots and the edges of the incisors respectively the top of the cusps have been verified. Measurements were done on models at the end of treatment of ten patients treated with fixed attachments who may represent ideal occlusion as far as profile radiographs and gnathology were concerned. After regulation of the plane of occlusion the vertical distances between the slot base plane (parallel to the plane of occlusion) and the edge of the incisors respectively tops of cusps were measured by means of a modified parallelometer in connection with a special slot and tube support as well as a specially developed dial test indicator, while a maximum fit between bracket base and buccal crown surface was given. In case of the upper front brackets (torque + 22 degrees) large vertical measurement to the edge of the incisors were recorded, 8.25 respectively 8.33 mm). This may be attributable to excessive torque of the applied brackets. Only approximate figures for the vertical positioning for other teeth could be given, as anatomical variations have to be considered.

[The positioner--a possibility for the fine adjustment of the occlusion objectively assessed by condylar measurements of the discrepancy between the ICP and RCP]

A group of ten adolescents was treated with fixed appliances at the Department of Stomatology and Oral and Maxillofacial Surgery, Graz. Subsequently the patients were fitted with a gnathological positioner. On the day of band removal ten sets of models were made and subsequently two, four and twelve weeks later. They were mounted on an articulator and cephalometric measurements were taken three times by each of the examiners. These records served to provide evidence of discrepancies of the condylar position between ICP and RCP in all three planes. In the second part of the examination, the patients were instructed to wear the appliance at night for another year. Casting of models, mounting in articulators and condymetric measurements were repeated as above. After wearing the positioner for three months, we observed a definite improvement of the occlusion and a wide conformity of the RCP and ICP measurements. After one year of night-time retention there was a slight increase of the mean values. In addition, we could establish statistically that condymetric model measurements are independent of the examiner and the method employed.

[Fixed appliances current state of the art]

Recent advances in fixed appliances are reviewed and discussed. These include cosmetically more appealing brackets (ceramic, lingual); new wires (nickel-titanium and titanium-molybdenum alloys); new biomechanical approaches (accurate computation of forces and torques according to Burstone resulting in the use of new mechanical concepts); experiences in the treatment of transplanted teeth made in the past 15 years; new approaches to the orthodontic finish (implementation of Andrews' "six keys to normal occlusion" with straight wires, accurate positioning of brackets, and gnathological positioners). Cases will be demonstrated.

Changes in occlusion and condylar positioning during retention with a gnathologic positioner

To investigate whether orthodontic cases can fulfil gnathologic requirement, models of 10 adolescent patients (of the Department of Orthodontics at the University Dental Clinic, Graz) were mounted in an articulator at band removal and 2, 4 and 12 weeks and one year later. During this year the patients wore a gnathologic positioner. Using a condymeter, discrepancies between RCP and ICP in three spatial planes were measured and the spatial diagonal computed. Statistical analysis showed a clear reduction of the means of slide in centric during continuous wearing of the positioner, after 3 months, RCP and ICP being almost identical. After a further 7 months, during which the positioner was worn only at night, the amount of slide increased again slightly. The increase of the spatial diagonal was due to an increase of the sagittal and vertical slides whereas the lateral slide remained constant.

[New wires and their force delivery--consequences for orthodontic therapy]

Levelling arches made of stainless-steel wires were compared with nickel-titanium wires of the new generation which are distinguished by their shape memory, superelasticity and their excellent spring-back. The data received from a bending test have been analysed statistically and revealed a linear unloading curve of the twisted stainless-steel wires. The nickel-titanium wires, however, showed a clear deviation form the linearity with a curviform course. Besides the unusual unloading curve with a constant force mechanism in the middle range of deactivation the wires give off the same amount of force irrespective of the degree of activation (that is to say, regardless whether the level difference between the brackets amounts to 1 or to 4 mm). The diagram shows that the greater the activity between the brackets, the longer the period of superelasticity. Therefore the nickel-titanium wires are suited for large level differences or deflections. At a low activation rate the characteristic line takes a very steep and almost linear deactivation curve. In these cases twisted stainless steal wires should be preferred because of their lower load deflection rate and flexibility.