Microbial and plant derived biomass for removal of heavy metals from wastewater

Thermochemical study of Cr(VI) sequestration onto chemically modified Areca catechu and its recovery by desorptive precipitation method

A new biosorbent for Cr(VI) sequestration was investigated from betel nut waste (BNW), Areca catechu, by H₂SO₄ charring. Aqueous insolubility and Cr(VI) uptake capacity of native BNW were potentially improved after H₂SO₄ modification due to cross-linking reaction of betel nut cellulose, thereby creating suitable complexation sites for Cr(VI) ion removal. Langmuir isotherm and pseudo second order (PSO) kinetic models described well with the experimental data. A trace amount of Cr(VI) was effectively removed below the safe drinking water standard (WHO, 0.05 mg/L) using charred BNW (CBNW). The negative value of ΔG° evaluated for all the temperatures suggested the spontaneous nature of Cr(VI) sequestration and positive value of ΔH° (42.43±0.13 kJ/mol) confirmed an endothermic reaction. Co-existing NO3−, Cl⁻, Na⁺ and Zn²⁺ ions showed negligible interferences, whereas SO42− and PO43− notably reduced Cr(VI) uptake capacity of CBNW. More than 98% of adsorbed Cr(VI) was desorbed using 1M NaOH solution. A light yellow precipitate of BaCrO₄ was recovered from the desorbed solution after precipitation with BaCl₂ solution. Therefore, the CBNW biosorbent investigated in this work is expected to be a promising material for Cr(VI) sequestration and its recovery from polluted water.

Removal of Pb2+ from Water Using Sustainable Brown Seaweed Phlorotannins

Bioadsorption is a promising technology to sequester heavy metal ions from water, and brown seaweed has been identified as one of the most appropriate adsorbents as it is abundant, low cost, and efficient at removing various metal ion contaminations. The ability to remove heavy metals from water arises from the high concentration of polysaccharides and phlorotannins in brown seaweed; however, remediation can be hampered by the salinity, location, and coexistence of pollutants in the contaminated water. Maintaining the adsorbent properties of brown seaweed while avoiding the fragility of living organisms could allow for the development of better adsorbents. Herein, we demonstrate that polymerized phlorotannin particles, synthesized from phlorotannins extracted from a species of brown seaweed (Carpophyllum flexuosum), were able to remove 460 mg of Pb²⁺ from water per gram of adsorbent. Scanning electron microscopy (SEM), attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), and thermogravimetric analysis (TGA) were used to characterize the polymerization process and the polymerized phlorotannin particles. Importantly, there was no direct correlation between the Pb²⁺ removal capacity and the phlorotannin content of various algal derivatives of three species of brown seaweed, C. flexuosum, Carpophyllum plumosum, and Ecklonia radiata, as all three had similar adsorption capacities despite differences in phlorotannin content. This work shows that naturally abundant, "green" materials can be used to help remediate the environment.

Preconcentrations of Cu (II) and Mn (II) by magnetic solid-phase extraction on Bacillus cereus loaded γ-Fe2O3 nanomaterials

For the simultaneous preconcentrations of Cu(II) and Mn(II), a novel preconcentration technique was developed and described. Bacillus cereus loaded magnetic ɣ-Fe₂O₃ nanoparticles were prepared and used as support materials on solid-phase extraction procedure. Important experimental parameters were investigated in details and pH 6.0, 3 mL min^-1 of flow rate, 5 mL of 1 mol L^-1 of HCl as eluent, 200 mg of biomass, and 200 mg of magnetic ɣ-Fe₂O₃ nanoparticles as support material was found as the best conditions. The preconcentrations factor were found to be 80 for Cu (II) and Mn(II). It was confirmed by the results that SPE columns could be used in 32 cycles. The LOD values calculated for Cu (II) and Mn (II) were 0.09 and 0.08 ng mL^-1, respectively. The RSD values found were less than 3.4%. The extraction recoveries were achieved as higher than 98%. The biosorption capacities of Cu (II), and Mn (II) were 26.0 mg g^-1, 30.3 mg g^-1 respectively. The approach devised for analyzing analyte concentrations in food samples proved to be successful.

Enhanced wastewater treatment performance by understanding the interaction between algae and bacteria based on quorum sensing

In order to further obtain sustainable wastewater treatment technology, in-depth analysis based on algal-bacterial symbiosis, quorum sensing signal molecules and algal-bacterial relationship will lay the foundation for the synergistic algal-bacterial wastewater treatment process. The methods of enhancing algae and bacteria wastewater treatment technology were systematically explored, including promoting symbiosis, reducing algicidal behavior, eliminating the interference of quorum sensing inhibitor, and developing algae and bacteria granular sludge. These findings can provide guidance for sustainable economic and environmental development, and facilitate carbon emissions reduction by using algae and bacteria synergistic wastewater treatment technology in further attempts. The future work should be carried out in the following four aspects: (1) Screening of dominant microalgae and bacteria; (2) Coordination of stable (emerging) contaminants removal; (3) Utilization of algae to produce fertilizers and feed (additives), and (4) Constructing recombinant algae and bacteria for reducing carbon emissions and obtaining high value-added products.

MIL series of metal organic frameworks (MOFs) as novel adsorbents for heavy metals in water: A review

With large specific surface area, abundant adsorption sites, flexible pore structure, and good water stability, Materials of Institute Lavoisier frameworks (MILs) have attracted increasing attention as effective environmental adsorbents. This review systematically analyzes and recapitulates recent progress in the synthesis and application of MIL-based adsorbents for the removal of aqueous heavy metal ions. Commonly used solvothermal, microwave, electrochemical, ultrasonic, and mechanochemical syntheses of MILs are first summarized and compared. Instead of focusing on adsorption process parameters, adsorption performances and governing mechanisms of virgin MILs, functional MILs, MIL-based composites, and carbonized MILs to representative metal(loid) ions (chromium, arsenic, lead, cadmium, and mercury) in water under various conditions are then systematically reviewed and discussed. In the end, this work also outlines prospects and future directions to promote the applications of MILs in treating heavy metal contaminated water.

Biosorption efficiency of nickel by various endophytic bacterial strains for removal of nickel from electroplating industry effluents: an operational study

Realising the hazardous effect of nickel on human health, microbes and plants are effectively used for bioremediation. The endophytic microorganisms have an important role in the phytoremediation of nickel using Vigna radiata. Therefore, in order to harness the potential of microbial strains, the present study was designed to examine the metal biosorption ability of endophytic bacterial strains isolated from plants growing in nickel-contaminated soil. A total of six endophytic nickel resistance bacteria were isolated from the plant Vigna radiata. The metal tolerant bacterial strains were identified following 16 S rRNA gene sequence analysis. Nickel biosorption estimation and plant growth-promoting (PGP) activities of isolated strains were performed and found high nickel biosorption efficiency of 91.3 ± 0.72% at 600 mg L^-1 using Bacillus safensis an isolated endophytic strain from Vigna radiata. Furthermore, high indole acetic acid (IAA) and exopolysaccharide (EPS) production were obtained in all the strains as compared to without nickel-containing medium used as control. Moreover, the production of high EPS suggests improved biosorption ability of isolated endophytic strains. In addition, a kinetic study was also performed to evaluate different adsorptions isotherms and support the nickel biosorption ability of endophytic strains. The treatment of nickel electroplating industrial effluent was also demonstrated by isolated endophytic strains. Among six (6) strains, B. cereus showed maximum 57.2 ± 0.62% biosorption efficiency of nickel which resulted in the removal of 1003.50 ± 0.90 mg L^-1 of nickel from the electroplating industry effluents containing initial 1791 ± 0.90 mg L^-1 of nickel. All other strains were also capable of significant nickel biosorption from electroplating industry effluents as well. Thus, isolated endophytic nickel tolerant strains can be further used at large-scale biosorption of nickel from electroplating industry effluent.

Endophytic fungi isolated from plants present on a mine tailing facility show a differential growth response to lead

Plants growing in metal polluted sites can be a source of microorganisms suitable for bio-assisted phytoremediation strategies. In this work, three endophytic fungi from the roots of Poa stuckertii and Poa pratensis, two grasses that naturally colonize a Lead-Zinc tailing storage facility in Southern Chile, were isolated and identified. The leachate of the tailing sands showed a Pb content of 1.36 ± 0.71 ppm, and a pH of 7.3. By amplifying the ITS1/ITS4 region of fungal ribosomal DNA, the isolates were identified as Bjerkandera sp., Microdochium sp. and Sarocladium sp. When the growth media was supplemented with 50 ppm of Pb at pH 4.5, Microdochium sp. showed an 80% decrease in the biomass, but the biomass production of Bjerkandera sp. and Sarocladium sp. was not affected by the same treatment. The accumulation of Pb in Microdochium sp. increased as a function of the concentration of the metal in the growth media, between 48.3 μM and 241.3 μM. We showed that two Poaceae plants growing on a Lead-Zinc tailing storage facility are a source of endophyte fungi, and that Pb had a differential effect on the growth of the isolated fungi independent of the plant of origin.

Combination application of elemental sulfur and earthworm increased the lead (Pb) uptake by ryegrass (Lolium perenne L.) in contaminated agricultural soil

The phytoremediation efficiency is largely depends on the bioavailability of heavy metal in soil. The activity of earthworms and oxidation of elemental sulfur (S⁰) in soil has influence on heavy metal speciation transformation in soil. By conducting pot experiment, we examined the possibility of enhancing phytoextraction efficiency of lead (Pb) in soil by ryegrass (Lolium perenne L.) with application of both S⁰ and earthworms. Results showed that the addition of S⁰ decreased soil pH and increased soil CEC, while a slight trend of decrease for soil pH and increase for CEC was found with earthworm application. In soil treated with earthworms, the addition of S⁰ increased the concentration of DTPA-extractable Pb by 9.9~20.8%. The concentration of diffusive gradients in thin film (DGT)-extractable Pb was increased by 26.31~32.9% with S⁰ and earthworm addition. In soil treated with earthworms, the addition of S⁰ increased the concentration of Pb in shoots of ryegrass by 55.7~110.4% and the translocation factor of Pb in ryegrass was also increased by S⁰ addition. Our results suggested that the combination application of earthworms and S⁰ could be an effective way to enhance the remediation efficiency of ryegrass for Pb-contaminated soil.

Recovery of value-added products by mining microalgae

Microalgae blooms are always blamed for the interruption of the aquatic environment and pose a risk to the source of drinking water. Meanwhile, microalgae as primary producers are a kind of resource pool and could benefit the environment and contribute to building a circular economy. The lipid and polyhydroxybutyrate (PHB) in the cells of microalgae could be alternatives to fossil fuels and plastics, respectively, which are the culprits of global warming and plastic pollution. Besides, some microalgae are rich in nutrients, such as proteins and astaxanthin, which make themselves suitable for feed additives. As wastewater is rich in nutrients necessary for microalgae, thus, value-added product recovery via microalgae could be an approach to valorizing wastewater. However, a one-size-fits-all approach deploying various wastewater for the above products cannot be summarized. On the contrary, specific technical protocols should be tailored regarding each product in microalgae biomass with various wastewater. Thus, this review is to summarize the research effort by far on wastewater-cultivated microalgae for value-added products. Wastewater type, regulation methods, and targeted product yields are compiled and discussed and are expected to guide future extrapolation into a commercial scale.

Bacterial Biosorbents, an Efficient Heavy Metals Green Clean-Up Strategy: Prospects, Challenges, and Opportunities

Rapid industrialization has led to the pollution of soil and water by various types of contaminants. Heavy metals (HMs) are considered the most reactive toxic contaminants, even at low concentrations, which cause health problems through accumulation in the food chain and water. Remediation using conventional methods, including physical and chemical techniques, is a costly treatment process and generates toxic by-products, which may negatively affect the surrounding environment. Therefore, biosorption has attracted significant research interest in the recent decades. In contrast to existing methods, bacterial biomass offers a potential alternative for recovering toxic/persistent HMs from the environment through different mechanisms for metal ion uptake. This review provides an outlook of the advantages and disadvantages of the current bioremediation technologies and describes bacterial groups, especially extremophiles with biosorbent potential for heavy metal removal with relevant examples and perspectives.

Modeling and Optimization of Heavy Metals Biosorption by Low-Cost Sorbents Using Response Surface Methodology

This paper exploits, through modeling and optimization, the experimental laboratory data on the biosorption of heavy metal ions Pb(II), Cd(II), and Zn(II) from aqueous media using soybean and soybean waste biomasses. The biosorption modeling was performed using the Response Surface Methodology, followed by optimization based on numerical methods. The aim of the modeling was to establish the most probable mathematical relationship between the dependent variables (the biosorption efficiency of the biosorbents when adsorbing metal ions, R(%), and the biosorption capacity of sorbents, q(mg/g)) and the process parameters (pH; sorbent dose, DS (g/L); initial metal ion concentration in solution, c0 (mg/L); contact time, tc (min); temperature, T (°C)), validated by methodologies specific to the multiple regression analysis. Afterward, sets of solutions were obtained through optimization that correlate various values of the process parameters to maximize the objective function. These solutions also confirmed the performance of soybean waste biomass in the removal of heavy metal ions from polluted aqueous effluents. The results were validated experimentally.

Recovery of Au from dilute aqua regia solutions via adsorption on the lyophilized cells of a unicellular red alga Galdieria sulphuraria: A mechanism study

The high electrical conductivity, chemical stability, and low toxicity of elemental Au make it a highly valuable resource. However, wastewater produced during the mining, utilization, and disposal of Au inevitably contains small amounts (10-40 mg L^-1) of Au, thus posing environmental risks. It is too acidic to be treated with inexpensive and eco-friendly bioadsorbents previously studied for the remediation of less acidic effluents. Herein, lyophilized Galdieria sulphuraria cells are shown to directly adsorb Au from simulated Au-containing wastewater with a total acid concentration of 4 M, achieving an adsorption capacity of 35 ± 2.5 mg g^-1 Au after 30-min exposure and a selectivity that exceeds that of an ion-exchange resin and is comparable to that of activated carbon. Additionally, Au adsorbed on these cells is more easily eluted than that adsorbed on the ion-exchange resin or activated carbon. Detailed characterizations reveal that Au accumulates on the surface of lyophilized cells, where it is mainly present as AuCl₄^- and not as Au⁰, in contrast to a previously proposed adsorption mechanism. Thus, our work provides valuable insights into the mechanism of Au adsorption on biomaterials and paves the way to the cheap and eco-friendly recovery of Au from acidic wastewater.

Heavy metal-induced selection and proliferation of antibiotic resistance: A review

Antibiotic resistance is recognized as a global threat to public health. The selection and evolution of antibiotic resistance in clinical pathogens was believed to be majorly driven by the imprudent use of antibiotics. However, concerns regarding the same, through selection pressure by a multitude of other antimicrobial agents, such as heavy metals, are also growing. Heavy metal contamination co-selects antibiotic and metal resistance through numerous mechanisms, such as co-resistance and cross-resistance. Here, we have reviewed the role of heavy metals as antimicrobial resistance driving agents and the underlying concept and mechanisms of co-selection, while also highlighting the scarcity in studies explicitly inspecting the process of co-selection in clinical settings. Prospective strategies to manage heavy metal-induced antibiotic resistance have also been deliberated, underlining the need to find specific inhibitors so that alternate medicinal combinations can be added to the existing therapeutic armamentarium.

Engineered macroalgal and microalgal adsorbents: Synthesis routes and adsorptive performance on hazardous water contaminants

Colourants, micropollutants and heavy metals are regarded as the most notorious hazardous contaminants found in rivers, oceans and sewage treatment plants, with detrimental impacts on human health and environment. In recent development, algal biomass showed great potential for the synthesis of engineered algal adsorbents suitable for the adsorptive management of various pollutants. This review presents comprehensive investigations on the engineered synthesis routes focusing mainly on mechanical, thermochemical and activation processes to produce algal adsorbents. The adsorptive performances of engineered algal adsorbents are assessed in accordance with different categories of hazardous pollutants as well as in terms of their experimental and modelled adsorption capacities. Due to the unique physicochemical properties of macroalgae and microalgae in their adsorbent forms, the adsorption of hazardous pollutants was found to be highly effective, which involved different mechanisms such as physisorption, chemisorption, ion-exchange, complexation and others depending on the types of pollutants. Overall, both macroalgae and microalgae not only can be tailored into different forms of adsorbents based on the applications, their adsorption capacities are also far more superior compared to the conventional adsorbents.

Antiretroviral Drugs in African Surface Waters: Prevalence, Analysis, and Potential Remediation

The sources, ecotoxicological impact, and potential remediation strategies of antiretroviral drugs (ARVDs) as emerging contaminants in surface waters are reviewed based on recent literature. The occurrence of ARVDs in water bodies raises concern because many communities in Africa depend on rivers for water resources. Southern Africa is a potential hotspot regarding ARVD contamination due to relatively high therapeutic application and detection thereof in water bodies. Efavirenz and nevirapine are the most persistent in effluents and are prevalent in surface water based on environmental concentrations. Whereas the highest concentration of efavirenz reported in Kenya was 12.4 µg L^-1 , concentrations as high as 119 and 140 µg L^-1 have been reported in Zambia and South Africa, respectively. Concentrations of ARVDs ranging from 670 to 34 000 ng L^-1 (influents) and 540 to 34 000 ng L^-1 (effluents) were determined in wastewater treatment plants in South Africa, compared with Europe, where reported concentrations range from less than limit of detection (LOD) to 32 ng L^-1 (influents) and less than LOD to 22 ng L^-1 (effluents). The present African-based review suggests the need for comprehensive toxicological and risk assessment of these emerging pollutants in Africa, with the intent of averting environmental hazards and the development of sustainable remediation strategies. Environ Toxicol Chem 2022;41:247-262. © 2021 SETAC.

Physical characterization and kinetic studies of Zn (II) biosorption by Morganella morganii ACZ05

Through this investigation, we establish the mechanism and physical characterization of zinc (II) sequestration by Morganella morganii ACZ05 strain, which was isolated and characterized from soil polluted by effluents from electroplating industries. As far as we know, there is very little literature concerning zinc biosorption using an environmental strain of M. morganii. The SEM analysis shows the dark porous gaps in the aggregated cell-matrix of test bacterial biomass which is inferred as water channels usually seen in biofilms, as compared to metal-unexposed control. M. morganii is not known to produce biofilms unless in the rare nosocomial conditions. Here, SEM analysis shows the production of biofilms after exposure to zinc (II) at 500 ppm, which has not been previously reported. EDX analysis of bacterial biomass also specified the sorption of zinc (II) by the bacterial cells and the presence of new peaks for zinc in contrast to control. Both XRD and FTIR analysis observations strongly implicate the potential of physical adsorption as a mechanism for heavy metal resistance. Analysis of the cell surface by Atomic force microscopy and examination of the topography revealed cell aggregation occurs during biofilm production after zinc biosorption. Unlike other reports, regular models such as Langmuir isotherm and Freundlich isotherm were found insufficient to explain the physisorption of zinc (II) metal ions on complex multicomponent adsorbents such as the exopolymeric surface of the bacterial cells. However, adsorption kinetics of zinc (II) to the bacterial biomass was most effectively elucidated by a pseudo-second-order kinetic model, suggesting a certain kind of chemisorption that requires further study.

Transcriptome expression analysis of the gene regulation mechanism of bacterial mineralization tolerance to high concentrations of Cd2

Cadmium (Cd) pollution is a pressing environmental issue that must be addressed. In recent years, microbial mineralization biotechnology has been developed into an effective and eco-friendly heavy metal bioremediation solution. In the present research, RNA-Seq technology was utilized to reveal the molecular mechanism through which Bacillus velezensis LB002 induced the mineralization and Cd²⁺ fixation under high-concentration Cd²⁺ stress. The metabolic pathways involved in the genes that were significant differentially expressed in the process of bacterial mineralization were also investigated. The results showed that the physiological response of bacteria to Cd²⁺ toxicity may include bacterial chemotaxis, siderophore complexation, and transport across cell membranes. Bacteria subjected to high-concentration Cd²⁺ stress can up-regulate genes of argH, argF, hutU, hutH, lpdA, and acnA related to arginine synthesis, histidine metabolism, and citric acid cycle metabolism pathways, inducing vaterite formation and Cd²⁺ fixation. Thus, the toxicity of Cd²⁺ was decreased and bacteria were allowed to grow. Real-time quantitative polymerase chain reaction (RT-qPCR) results confirmed the data obtained by RNA-Seq, indicating that bacteria can reduce Cd²⁺ toxicity by regulating the expression of related genes to induce mineralization. A basic bioremediation strategy to deal with high-concentration heavy-metal pollution was proposed from the perspective of gene regulation.

New insights into the sorption of U(VI) on kaolinite and illite in the presence of Aspergillus niger

The regulation effect of Aspergillus niger to the sorption behavior of U(VI) on kaolinite and illite was studied through investigating the enrichment of U(VI) on kaolinite-Aspergillus niger and illite-Aspergillus niger composites. Kaolinite- or illite-A. niger composites were prepared through co-culturation method. Results showed that U(VI) sorption on kaolinite and illite in different pH ranges could be attributed to ion exchange, outer-sphere complexes (OSCs), and inner-sphere complexes (ISCs), while only the ISCs on the bio-composites. Moreover, micro-spectroscopy tests revealed that U(VI) coordinate with phosphate, amide, and carboxyl groups on illite- and kaolinite- A. niger composites. X-ray photoelectron spectroscopy (XPS) further found that U(VI) was partly reduced to non-crystalline U(IV) by A. niger in the bio-composites, occurring as phosphate coordination polymers or biomass-associated monomers. The findings herein provide further insight into the immobilization and migration of uranium in environments.

Bioreduction and bioremoval of hexavalent chromium by genetically engineered strains (Escherichia coli MT2A and Escherichia coli MT3)

The number of studies on the removal of hazardous metals from water using genetic engineering technologies is growing. A high rate of metal ion removal from the environment is ensured, particularly through the expression of cysteine and thiol-rich proteins such as metallothioneins in bacterial cells. In this study, we used recombinant strains created by cloning the human metallothioneins MT2A and MT3 into Escherichia coli Jm109 to assess the removal and reduction of hexavalent chromium (Cr(VI)) from aqueous solutions. MT2A was the most effective strain in both Cr(VI) removal (89% in 25 mg/L Cr(VI)) and Cr(VI) reduction (76% in 25 mg/L Cr(VI)). The amount of Cr adsorbed per dry cell by the MT2A strain was 22 mg/g. The biosorption of total Cr was consistent with the Langmuir isotherm model. Scanning electron microscope (SEM) images revealed that the morphological structures of Cr(VI)-treated cells were significantly damaged when compared to control cells. Scanning transmission electron microscope (STEM) images showed black spots in the cytoplasm of cells treated with Cr(VI). Shifts in the Fourier transform infrared spectroscopy analysis (FTIR) spectra of the cells treated with Cr(VI) showed that the groups interacting with Cr were hydroxyl, amine, amide I, amide II, phosphoryl and carbonyl. When all of the experimental data was combined, it was determined that both MT2A and MT3 were effective in removing Cr(VI) from aqueous solutions, but MT2A was more effective, indicating that MT2A may be employed as a biotechnological tool.

Efficiency of Different Moringa oleifera (Lam.) Varieties as Natural Coagulants for Urban Wastewater Treatment

There is a great need to find cheaper but still efficient treatment methods for wastewater. This study aimed to test the purifying performance of three different Moringa oleifera varieties that were cultivated in Tunisia on raw (RUW) and secondary treated urban wastewater (TUW). The seeds of the Mornag, Egyptian, and Indian varieties were powdered, added to the water (at concentrations of 0, 50, 100, and 150 mg·L−1), and stirred for 45 min at 120 rpm, and then left to settle for two hours. A physicochemical characterization of the wastewater was carried out before and after treatment. The investigated treatments decontaminated both types of urban wastewater. The best treatments were obtained with the Egyptian variety (at 150 mg·L−1), which excelled at the reduction of EC, TSS, BOD5, Cl, SO4, Ca, Na, Cd, and Fe in RUW and BOD5, EC, Na, Mg, Cl, and Cd in TUW. High amounts of TKN was found in both types of Moringa-treated wastewater, meaning that it could be used in agricultural irrigation, leading to less use of chemical nitrogen fertilizers and thus improving sustainability for crops, soils, animals, and humans. The Egyptian Moringa variety constitutes a cost-effective and environmentally friendly adsorbent that can be used as a replacement for more expensive treatment technologies.

Gold Nanoparticles: Biosynthesis and Potential of Biomedical Application

Gold nanoparticles (AuNPs) are extremely promising objects for solving a wide range of biomedical problems. The gold nanoparticles production by biological method ("green synthesis") is eco-friendly and allows minimization of the amount of harmful chemical and toxic byproducts. This review is devoted to the AuNPs biosynthesis peculiarities using various living organisms (bacteria, fungi, algae, and plants). The participation of various biomolecules in the AuNPs synthesis and the influence of size, shapes, and capping agents on the functionalities are described. The proposed action mechanisms on target cells are highlighted. The biological activities of "green" AuNPs (antimicrobial, anticancer, antiviral, etc.) and the possibilities of their further biomedical application are also discussed.

A critical review on microbial carbonate precipitation via denitrification process in building materials

The naturally occurring biomineralization or microbially induced calcium carbonate (MICP) precipitation is gaining huge attention due to its widespread application in various fields of engineering. Microbial denitrification is one of the feasible metabolic pathways, in which the denitrifying microbes lead to precipitation of carbonate biomineral by their basic enzymatic and metabolic activities. This review article explains all the metabolic pathways and their mechanism involved in the MICP process in detail along with the benefits of using denitrification over other pathways during MICP implementation. The potential application of denitrification in building materials pertaining to soil reinforcement, bioconcrete, restoration of heritage structures and mitigating the soil pollution has been reviewed by addressing the finding and limitation of MICP treatment. This manuscript further sheds light on the challenges faced during upscaling, real field implementation and the need for future research in this path. The review concludes that although MICP via denitrification is an promising technique to employ it in building materials, a vast interdisciplinary research is still needed for the successful commercialization of this technique.

Study on the aerobic remediation of Ni(II) by Pseudomonas hibiscicola strain L1 interaction with nitrate

Aerobic denitrifying bacteria have the potential to remove the co-pollutants Ni(II) and nitrate in industrial wastewater. In this study, aerobic denitrifying bacteria with significant Ni(II) removal efficiency was isolated from the biological reaction tank and named as Pseudomonas hibiscicola L1 strain after 16 S rRNA identification analysis. The removal of ever-increasing Ni(II) and NO₃^--N wastewater under aerobic conditions by strain L1 was discussed. The experimental results showed that strain L1 removed 84% of Ni(II) and 81% of COD, with the use of 34.8 mg L^-1 of nitrogen source and without nitrite accumulation yet. Strain L1 had remarkable activity (OD₆₀₀ = 0.51-0.56 (p < 0.05)) at 20 mg L^-1 of Ni(II) and 100 mg L^-1 of NO₃^--N. It was found that high Ni(II) gradients (2-10 mg L^-1) had little effect on nitrate removal ratio (35-34% (p > 0.05), and the removal ratios of Ni(II) was enhanced (from 42% to 83% (p < 0.05)) by increasing nitrate (25-100 mg L^-1). Also, the results indicated that strain L1 could reduce Ni(II) and nitrate under different pH (6-9); electron donor-glucose, sodium acetate, sodium succinate and trisodium citrate; C/N (5-20) and coexisting ions (Cu(II) and Zn(II)). Notably, the nitrogen balance analysis showed 32.4% of TN was lost nitrogen and 19.7% of TN was assimilated for cell growth, which indicated aerobic denitrification process of strain L1. Meanwhile, characterization technology (SEM, FTIR, and XRD) showed Ni(II) was bioadsorbed in the form of Ni(NH₂)₂, NiCO₃, and Ni(OH)₂·2H₂O through surface functional groups. This research provides new microbial method for the simultaneous removal of nitrate and Ni(II) in wastewater.

Effectiveness of Aerator Ventures, Deposition with Magnets, Filtering, and Ion Exchange in One Unit against Reduction of Iron, Total Dissolved Solid, and Marine Well Water

BACKGROUND: It is known the effectiveness of a venturi aerator, deposition with a sand filter magnet and ion exchange in one unit to reduce Fe content, total dissolved solid (TDS) and saltiness (CL content) in clean water, and the ability of ion exchange to reduce CL content is known. AIM: This study aims to analyze the effectiveness of venturi aerator, magnetic sedimentation, filtration, and ion exchange in one unit against Fe, TDS, and CL well water. METHODS: The method used is a quasi-experimental method using aeration with a venturi system, deposition with magnets, filtration, and ion exchange. The population in this study was all water containing Fe and CL in the Darul Kamal sub-district, Aceh Besar. The sample in this study is part of the population following research needs. RESULTS: The results showed an effect of a venturi aerator, deposition with magnets, filtering sea sand, anion, and cation resins in one unit to decrease Fe content and did not affect decreasing TDS content and Salinity. Moreover, a venturi aerator has an effect, deposition with magnets, filtering sea sand, anion, and cation resins in one unit on the decrease in Fe content, TDS, and salinity at deposition time of 24 h. Venturi aerator’s effect on Fe reduction does not affect TDS and CL of well water. There is an effect of venturi aerator and precipitation with magnets, in one unit on Fe reduction, and does not affect TDS and CL of well water. There is an effect of venturi aerator, precipitation with magnets, filtration in one unit on Fe reduction, no effect on TDS, and CL of well water. CONCLUSION: This tool effectively reduces Fe content and effectively reduces Fe, TDS, and salinity at a 24 h deposition time.

Application of co-pyrolysis biochar for the adsorption and immobilization of heavy metals in contaminated environmental substrates

Heavy metal pollution has been considered as a serious threat to the environment and human in the past decades due to its toxic and unbiodegradable properties. Recently, extensive studies have been carried out on the removal of heavy metals, and various adsorption materials have been successfully developed. Among, biochar is a promising option because of its advantages of various biomass sources, abundant microporous channels and surface functional groups, as well as its attractive economic feasibility. However, the application of pristine biochar is limited by its low adsorption capacity and nonregenerative property. Co-pyrolysis biochar, produced from the pyrolysis of biomass with the addition of another biomass or non-biomass precursor, is potential in overcoming the limitation of pristine biochar and achieving superior performance for heavy metal adsorption and immobilization. Therefore, this article summarizes the recent advances in development and applications of co-pyrolysis biochar for adsorption and immobilization of various heavy metals in contaminated environmental substrates. In details, the production, characteristics and advantages of co-pyrolysis biochar are initially presented. Subsequently, the adsorption behaviors and mechanisms of different heavy metals (including Hg, Zn, Pb, Cu, Cd, Cr, As, etc.) in flue gas and wastewater by co-pyrolysis biochar are reviewed, as well as factors influencing their adsorption capacities. Meanwhile, the immobilization of heavy metals in both biochar itself and contaminated soils by co-pyrolysis biochar is discussed. Finally, the limitations of current studies and future prospects are proposed. It aims at providing a guideline for the exploitation and application of cost-effective and environmental-friendly co-pyrolysis biochar in the decontamination of environmental substrates.

Grafting chelating groups on 2D carbon for selective heavy metal adsorption

Iminodiacetic acid (IDA) is a tridentate ligand, which can capture metal ions by forming two fused five-membered chelate rings. In this study, we fixed IDA moieties onto a two-dimensional nanocarbon, graphene oxide (GO), to obtain materials with high and selective adsorption of metal ions. The synthesis conditions for the GO-IDA composites were optimized, then their structures were characterized by infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and CHN elemental analysis. In addition, the heavy-metal removal efficiency and selectivity of the GO-IDA composites with different length alkyl linkers between the GO and IDA were investigated. An aqueous solution containing 10 metal ions (Al, As, B, Cd, Cr, Cu, Mn, Pb, Se, and Zn) was used as a model for contaminated water at pH 7, and the interactions of the ions with GO-IDA were in the order of Cu > Pb > As > B > Zn > Al ≈ Se. The interaction between Cu and GO-IDA was confirmed by XPS and extended X-ray absorption fine structure (EXAFS), which showed that Cu was coordinated to IDA.

Evidence of Resistance of Heavy Metals from Bacteria Isolated from Natural Waters of a Mining Area in Mexico

This study focuses on identifying relationships between the content of heavy metals in water and the resistance patterns of different bacteria. Samples from watercourses in one of the most important mining areas in Mexico were collected. Seventy-one bacteria were isolated, and their resistance to Cr, Zn, Cu, Ag, Hg, and Co was studied. The Minimum Inhibitory Concentration range was determined, and a Multiple Metal Resistant index was calculated. After that, 11 isolated bacteria were chosen to estimate kinetic parameters. The obtained results show differences in the behavior of the studied bacteria concerning the presence of heavy metals in the media: (1) without effect, (2) inhibited growth; and (3) considerable inhibited growth. Finally, a Performance Index was proposed to select adequate bacteria for heavy metals removal; five bacteria were selected. Among them, Pseudomonas koreensis was identified as a good candidate for a future biosorption system since these bacteria can stimulate growth in the presence of all the metals tested.

Experiments and simulation of co-migration of copper-resistant microorganisms and copper ions in saturated porous media

Heavy metal (HV) pollutants may migrate to the groundwater environment through leaching, causing groundwater pollution. Compared with surface water pollution, groundwater pollution is complex and hidden. Existing methods for treating HV pollution in the vadose zone have had limited application owing to various problems. In recent years, microorganisms have been used in the field of pollution control and remediation owing to their outstanding adsorption and degradation properties and low cost, but their environmental safety and behavior in porous media are still poorly understood. This study aimed to investigate the migration behavior and mechanisms of copper ions in saturated porous media under the action of copper-resistant microorganisms and to establish a corresponding numerical model to simulate the results. The key parameters of adsorption and migration were determined through batch adsorption and soil column experiments. A one-dimensional soil column was used to conduct a co-migration experiment using copper-resistant microorganisms and Cu²⁺ in water-saturated quartz sand, and a co-migration mathematical model was constructed. It was found that the existence of microorganisms had an inhibitory effect on the migration of Cu²⁺ in quartz sand, and Cu²⁺ promoted the migration of microorganisms, reduced their adsorption, and increased their concentration in the column experiment effluent. The selected solute transport mathematical model had a good fitting effect on the breakthrough curves of copper ion and copper-resistant microorganisms during their co-migration. The results can provide parameters and a theoretical basis for the risk assessment and prevention of HV pollution in the saturated zone or aquifers.

Isolation and screening of chromium resistant bacteria from industrial waste for bioremediation purposes

Chromium (VI) a highly toxic metal, a major constituent of industrial waste. It is continuously release in soil and water, causes environmental and health related issues, which is increasing public concern in developing countries like Pakistan. The basic aim of this study was isolation and screening of chromium resistant bacteria from industrial waste collected from Korangi and Lyari, Karachi (24˚52'46.0"N 66˚59'25.7"E and 24˚48'37.5"N 67˚06'52.6"E). Among total of 53 isolated strains, seven bacterial strains were selected through selective enrichment and identified on the basis of morphological and biochemical characteristics. These strains were designated as S11, S13, S17, S18, S30, S35 and S48, resistance was determined against varying concentrations of chromium (100-1500 mg/l). Two bacterial strains S35 and S48 showed maximum resistance to chromium (1600 mg/l). Bacterial strains S35 and S48 were identified through 16S rRNA sequence and showed 99% similarity to Bacillus paranthracis and Bacillus paramycoides. Furthermore, growth condition including temperature and pH were optimized for both bacterial strains, showed maximum growth at temperature 30ºC and at optimum pH 7.5 and 6.5 respectively. It is concluded that indigenous bacterial strains isolated from metal contaminated industrial effluent use their innate ability to transform toxic heavy metals to less or nontoxic form and can offer an effective tool for monitoring heavy metal contamination in the environment.

Artificial neural networks modeling for lead removal from aqueous solutions using iron oxide nanocomposites from bio-waste mass

Heavy metal ions in aqueous solutions are taken into account as one of the most harmful environmental issues that ominously affect human health. Pb(II) is a common pollutant among heavy metals found in industrial wastewater, and various methods were developed to remove the Pb(II). The adsorption method was more efficient, cheap, and eco-friendly to remove the Pb(II) from aqueous solutions. The removal efficiency depends on the process parameters (initial concentration, the adsorbent dosage of T-Fe3O4 nanocomposites, residence time, and adsorbent pH). The relationship between the process parameters and output is non-linear and complex. The purpose of the present study is to develop an artificial neural networks (ANN) model to estimate and analyze the relationship between Pb(II) removal and adsorption process parameters. The model was trained with the backpropagation algorithm. The model was validated with the unseen datasets. The correlation coefficient adj.R² values for total datasets is 0.991. The relationship between the parameters and Pb(II) removal was analyzed by sensitivity analysis and creating a virtual adsorption process. The study determined that the ANN modeling was a reliable tool for predicting and optimizing adsorption process parameters for maximum lead removal from aqueous solutions.

Bioadsorbents from algae residues for heavy metal ions adsorption: chemical modification, adsorption behaviour and mechanism

Biosorption is an emerging technology for the removal of heavy metals from industrial wastewater by natural or modified biomass. In this study, we proposed a novel protocol for making full use of seaweeds. Brown seaweed Sargassum carpophyllum residue (SCR) and green seaweed Caulerpa lentillifera residue (CLR) were obtained after extraction of the bioactive polysaccharides. The obtained residues were further chemical modified by butanedioic anhydride to obtained respective carboxylated product, named CSCR and CCLR. According to the titration results, CSCR and CCLR contained 2.77 and 2.12 mmol/g of carboxyl group. After modification, the adsorption capacity for metal ions increased by 3-6 times. The adsorption capacity of CSCR for Cu²⁺, Pb²⁺, Cd²⁺ and Mn²⁺ was 52.37, 107.11, 85.62, and 43.52 mg/g, and that of CCLR was 78.10, 108.80, 87.30 and 57.80 mg/g, respectively. The adsorption was well described by the pseudo-second-order kinetic model and Langmuir adsorption isotherm equation.

Biodiversity of Actinomycetes from Heavy Metal Contaminated Technosols

Technosols are artificial soils generated by diverse human activities and frequently contain toxic substances resulting from industrial processes. Due to lack of nutrients and extreme physico-chemical properties, they represent environments with limited bacterial colonization. Bacterial populations of technosols are dominated usually by Actinobacteria, including streptomycetes, known as a tremendous source of biotechnologically important molecules. In this study, the biodiversity of streptomycete-like isolates from several technosols, mainly mine soils and wastes (landfills and sludge) in Slovakia, was investigated. The combination of basic morphological and biochemical characterisations, including heavy metal resistance determination, and molecular approaches based on 16S rRNA gene analysis were used for the identification of the bacterial strains. From nine isolates of Actinobacteria collected from different habitats, one was found to represent a new species within the Crossiella genus. Eight other isolates were assigned to the genus Streptomyces, of which at least one could represent a new bacterial species. Some isolates showed high resistance to Pb, Zn, Cu or Ni. The most tolerated metal was Pb. The results obtained in this study indicate that technosols are a prospective source of new actinomycete species resistant to heavy metals what underlines their bioremediation potential.

Suspect screening workflow comparison for the analysis of organic xenobiotics in environmental water samples

Suspect screening techniques are able to determine a broader range of compounds than traditional target analysis. However, the performance of the suspect techniques relies on the procedures implemented for peak annotation and for this, the list of potential candidates is clearly a limiting factor. In order to study this effect on the number of compounds annotated in environmental water samples, a method was validated in terms of absolute recoveries, limits of quantification and identification, as well as the peak picking capability of the software (Compound Discoverer 2.1) using a target list of 178 xenobiotics. Four suspect screening workflows using different suspect lists were compared: (i) the Stoffident list, (ii) all the NORMAN lists, (iii) suspects containing C, H, O, N, S, P, F or Cl in their molecular formula with more than 10 references in Chemspider and (iv) the mzCloud library. The results were compared in terms of the number of annotated compounds at each confidence level. The same 8 compounds (atenolol, caffeine, caprolactam, carbendazim, cotinine, diclofenac, propyphenazone and trimetoprim) were annotated at the highest confidence level using the four workflows. Remarkable differences were observed for lower confidence levels but only 4 features were annotated at different levels by the four workflows. While the third approach provided the highest number of annotated features, the workflow based on the mzCloud library rendered satisfactory results with a simpler approach. Finally, this latter approach was extended to the analysis of organic xenobiotics in different environmental water samples.

Biofilm Formation, Production of Matrix Compounds and Biosorption of Copper, Nickel and Lead by Different Bacterial Strains

Bacterial biofilms play a key role in metal biosorption from wastewater. Recently, Enterobacter asburiae ENSD102, Enterobacter ludwigii ENSH201, Vitreoscilla sp. ENSG301, Acinetobacter lwoffii ENSG302, and Bacillus thuringiensis ENSW401 were shown to form air–liquid (AL) and solid–air–liquid (SAL) biofilms in a static condition at 28 and 37°C, respectively. However, how environmental and nutritional conditions affect biofilm formation; production of curli and cellulose; and biosorption of copper (Cu), nickel (Ni), and lead (Pb) by these bacteria have not been studied yet. In this study, E. asburiae ENSD102, E. ludwigii ENSH201, and B. thuringiensis ENSW401 developed the SAL biofilms at pH 8, while E. asburiae ENSD102 and Vitreoscilla sp. ENSG301 constructed the SAL biofilms at pH 4. However, all these strains produced AL biofilms at pH 7. In high osmolarity and ½-strength media, all these bacteria built fragile AL biofilms, while none of these strains generated the biofilms in anaerobic conditions. Congo red binding results showed that both environmental cues and bacterial strains played a vital role in curli and cellulose production. Calcofluor binding and spectrophotometric results revealed that all these bacterial strains produced significantly lesser amounts of cellulose at 37°C, pH 8, and in high osmotic conditions as compared to the regular media, at 28°C, and pH 7. Metal biosorption was drastically reduced in these bacteria at 37°C than at 28°C. Only Vitreoscilla sp. ENSG301 and B. thuringiensis ENSW401 completely removed (100%) Cu and Ni at an initial concentration of 12.5 mg l^–1, while all these bacteria totally removed (100%) Pb at concentrations of 12.5 and 25 mg l^–1 at pH 7 and 28°C. At an initial concentration of 100 mg l^–1, the removal of Cu (92.5 to 97.8%) and Pb (89.3 to 98.3%) was the highest at pH 6, while it was higher (84.7 to 93.9%) for Ni at pH 7. Fourier transform infrared spectroscopy results showed metal-unloaded biomass biofilms contained amino, hydroxyl, carboxyl, carbonyl, and phosphate groups. The peak positions of these groups were shifted responding to Cu, Ni, and Pb, suggesting biosorption of metals. Thus, these bacterial strains could be utilized to remove Cu, Ni, and Pb from aquatic environment.

Research trends of heavy metal removal from aqueous environments

Heavy metals are a threat against human health. During the last century, with increased industrial activities, many water resources have been contaminated by heavy metals. Meanwhile the number of scientific studies about removing these toxic substances from aqueous environments has increased exponentially. According to bibliometric analysis the number of articles from 2000 to 2019 experienced a 1700% growth rate. China, India and the United States have published the greatest number of top-cited articles on the topic, with China in first place by a large margin. Six clusters of papers (by topic) were identified. From among the processes such as adsorption, membrane filtration, and ion exchange, adsorption has the lion's share of the investigations. Technical and efficiency considerations, as well as environmental impact and cost-effectiveness, were chosen as criteria to compare different methods. According to life cycle assessment, adsorption has the least amount of negative environmental effects compared to other trending methods such as membrane filtration and ion exchange. From a financial viewpoint, utilizing biosorbents and biochars for adsorption are the best options. Unlike other methods which depend on pretreatment processes and have a high energy demand, these sorbents are cost-effective and exhibit acceptable performance.

Utilization of extracellular fungal melanin as an eco-friendly biosorbent for treatment of metal-contaminated effluents

Fungal melanins have been considered as potential biosorbents due to their metal-binding properties, stability, and scalability. Previous studies established scalable fungal melanin production methods with promising strains, however, their applicability for metal-contaminated effluents treatment has not been sufficiently reported. Herein, melanin pigment derived from Amorphotheca resinae was produced and characterized using microscopy and spectroscopy techniques. Adsorptive properties towards Cu(II), Pb(II), Cd(II), and Zn(II) were evaluated using batch tests. Melanin pigment was composed of aggregates of nanosized particles with indole-based constituents. Adsorption capacities increased with the pH of solution, especially at pH > 4.0. Maximum binding capacities of Cu(II), Pb(II), Cd(II), and Zn(II) on melanin were 69.18, 103.23, 24.31, and 13.57 mg/g, respectively. The competitive adsorption experiments elucidated affinity as Cu(II)>Pb(II)≫Cd(II)>Zn(II). Adsorption time generally required <2.5 h to reach equilibrium; the pseudo-second-order kinetic model well described the kinetics. Chelating ability of free radicals in pigment was considered as a possible mechanism for adsorption. Initial adsorption capacities remained almost intact even after 5 consecutive adsorption-desorption cycles. Complete removal of Cu(II), Pb(II), and Cd(II) from metal-contaminated effluent was confirmed. Consequently, melanin pigment derived from A. resinae can be used as a biosorbent suitable for the treatment of metal-contaminated aqueous solutions.

Analysis of Minerals and Heavy Metals Using ICP-OES and FTIR Techniques in Two Red Seaweeds (Gymnogongrus griffithsiae and Asparagopsis taxiformis) from Tunisia

In this study, the mineral and heavy metals (arsenic (As), cadmium (Cd), copper (Cu), iron (Fe), mercury (Hg), potassium (K), manganese (Mn), sodium (Na), phosphorus (P), and lead (Pb)) in two red Tunisian seaweeds Gymnogongrus griffithsiae (G. griffithsiae) and Asparagopsis taxiformis (A. taxiformis), were evaluated. Mineral and trace element analyses were achieved using inductively coupled plasma optical emission spectrometry (ICP-OES). Fourier transform infrared (FTIR) spectroscopy was used to predict the major functional groups that would be implicated in the seaweeds mineral uptake. Our results showed that the studied A. taxiformis species had much higher mineral and heavy metal concentrations than G. griffithsiae. Na (200.60 mg/kg) was the most abundant element followed by K (137.84 mg/kg) > P (35.93 mg/kg) for A. taxiformis species. However, only Na (165.23 mg/kg) and P (51.19 mg/kg) were detected in G. griffithsiae alga. As regards heavy and toxic metals, allowable concentrations have been found in both seaweeds. The concentration ranges for the most undesirable heavy metals were as follows: Pb (0.39-0.51 mg/kg), As (0.11-0.40 mg/kg), Cd (0.01-0.02 mg/kg), and Hg (0.00-0.02 mg/kg). According to FTIR analysis, the major functional groups present in the studied seaweeds were carboxyl, hydroxyl, sulfate, and phosphate groups that are considered as excellent binding sites for metal retention.

Removal of lead ions in an aqueous solution by living and modified Aspergillus niger

An indigenous lead-tolerant fungal strain was isolated from lead-contaminated soil and identified as Aspergillus niger, via 18S rRNA gene sequencing. We determined the adsorption and accumulation of Pb(II) by living A. niger and the adsorption of Pb(II) via modified A. niger. This strain resisted and removed 96.21%-100% Pb(II) ranging from 2 to 8 mmol/L Pb(II). Pb-containing particles were observed outside of the cell, and lead was detected inside the cell under scanning electron microscopy and transmission electron microscopy. The process of measuring the adsorption ability of modified fungal biomass, freeze-dried, high-temperature, and alkali-treated fungal samples was analyzed; they adsorbed 25.02%, 8.76%, and 15.05% Pb(II) under 8 mmol/L Pb(II) in 43, 10, and 10 hr, respectively. These three types of modified A. niger fit the pseudo-second-order model equation well. PRACTITIONER POINTS: Isolation and identification of effective Pb(II) removal strain from the soil around Dexing lead-zinc mine. The ability of living and modified Aspergillus niger to remove Pb(II) in an aqueous environment was evaluated. Lead distributions inside and outside the cell were analyzed by SEM and TEM. Kinetic models for modified biomass adsorbing Pb(II) were made for describing adsorption process.

Hexavalent chromium sequestration from electronic waste by biomass of Aspergillus carbonarius

The idea of eliminating noxious metal ions from electronic waste contaminated water has led to the use of the metal adsorbing ability of biological matter. The principle of an ion exchanger of biological origin is the key in exhibiting this metal binding feature of microbial biomass. In this study, dead biomass of Aspergillus carbonarius was immobilized using sodium alginate and tested as a biosorbent for hexavalent chromium elimination from effluent. Size and functional groups were characterized for the immobilized bead containing biomass. Optimization of boundary variables like bead size, biosorbent dosage, contact time, pH, and temperature were performed. Maximum elimination of 92.43% hexavalent chromium was achieved at pH 2.0 for 12 h at 37°C, with 20 g/25 mL adsorbent dosage. On application of adsorption isotherms, the data were found to fit Freundlich isotherm and exhibited a high value of correlation coefficient proving the ability of A. carbonarius biomass to act as an effective quencher of hexavalent chromium from electronic waste contaminated water.

A review on cleaner strategies for extraction of chitosan and its application in toxic pollutant removal

Existence of human beings in this world require a cleaner environment, in which, water is the main requirement for living. Owing to the considerable development in civilisation and considerable population explosion, an increase in the contamination of natural water resources by means of non-biodegradable contaminants like heavy metals is observed thereby increasing the need for treatment of water before usage. Despite the existence of specific limits for disposal of heavy metals in water resources, studies still show high contamination of heavy metals in all these water resources. This review provides a brief note on sources and toxicity of different heavy metals in various oxidation states, their effects as well as highlights the numerous available and advanced techniques for heavy metals removal. Of all techniques adsorption is found to be beneficial as it doesn't inculcate any secondary pollutants to the environment. Additionally, this article has investigated the advantages of polymer nanocomposites in adsorption and mainly focused on biopolymer chitosan owing to its abundance in natural environment. The cleaner techniques for the extraction of chitosan and its functionalisation using different types of nanofillers are comprehensively discussed in this review. This article suggests a better alternative for conventional adsorbents as well as aids in remediation of wastes.

The scientometric analysis of the research on microalgae-based wastewater treatment

This study explores the characteristics of the literature on microalgae-based wastewater treatment during the past 20 years, based on the Web of Science Core Collection database and its scientometric techniques. The results reveal that the literature on microalgae-based wastewater treatment has grown rapidly with 2621 publications and 54,388 citations in total. Most of the document types are journal articles, constituting 80.7% of the total records. China and the USA are the two most active countries, regarding the publications and cooperation in this filed from the viewpoint of the number of publishing papers, total number of citations, and the number of multinational author papers. The Chinese Academy of Sciences is the largest institutional contributor, publishing 2.3% of the papers, followed by the Indian Institute of Technology (2.2%) and Council of Scientific & Industrial Research (2.1%). The most publishing author is Ruan (35 papers) with the highest number of citation (2460 times). "Bioresource Technology" is the most publishing journal with 365 published papers, while 36.2% of the total sample is published in the subject area of "Environmental Sciences Ecology." The most cited paper in the past 20 years is a review of the status of phosphorus removal in wastewater by de-Bashan in 2004. Bibliometric analysis has systematically combed the development system of microalgae-based wastewater treatment in the past 20 years and has a great potential to gain valuable insights for the future development, which provides a supplement to the common content analysis.

Beneficial microbiomes for bioremediation of diverse contaminated environments for environmental sustainability: present status and future challenges

Over the past few decades, the rapid development of agriculture and industries has resulted in contamination of the environment by diverse pollutants, including heavy metals, polychlorinated biphenyls, plastics, and various agrochemicals. Their presence in the environment is of great concern due to their toxicity and non-biodegradable nature. Their interaction with each other and coexistence in the environment greatly influence and threaten the ecological environment and human health. Furthermore, the presence of these pollutants affects the soil quality and fertility. Physicochemical techniques are used to remediate such environments, but they are less effective and demand high costs of operation. Bioremediation is an efficient, widespread, cost-effective, and eco-friendly cleanup tool. The use of microorganisms has received significant attention as an efficient biotechnological strategy to decontaminate the environment. Bioremediation through microorganisms appears to be an economically viable and efficient approach because it poses the lowest risk to the environment. This technique utilizes the metabolic potential of microorganisms to clean up contaminated environments. Many microbial genera have been known to be involved in bioremediation, including Alcaligenes, Arthrobacter, Aspergillus, Bacillus, Burkholderia, Mucor, Penicillium, Pseudomonas, Stenotrophomonas, Talaromyces, and Trichoderma. Archaea, including Natrialba and Haloferax, from extreme environments have also been reported as potent bioresources for biological remediation. Thus, utilizing microbes for managing environmental pollution is promising technology, and, in fact, the microbes provide a useful podium that can be used for an enhanced bioremediation model of diverse environmental pollutants.