High-efficiency nutrients reclamation from landfill leachate by microalgae Chlorella vulgaris in membrane photobioreactor for bio-lipid production

Rheokinetics of microalgae slurry during hydrothermal pretreatment processes

Hydrothermal pretreatment is an efficient process for improving the productivity of biofuels from wet microalgae biomass. The rheological behavior of microalgae slurry is a significant parameter affecting the performance of hydrothermal pretreatment reactors. Herein, the dynamic rheological behavior of microalgae slurry during hydrothermal pretreatment was investigated for the first time. The results revealed that the insoluble organics released from microalgae cells was the main factor affecting the rheological behavior of microalgae slurry. The denaturation and hydrolysis of starch and protein in liquid phase at different temperature regions caused the increasing and decreasing of viscosity of the microalgae slurry, respectively. The rheokinetics equations were established based on four-parameter cross-linking rheokinetics equation to describe the variation of viscosity with reaction time in different temperature. The variation of the rheokinetics model parameters with temperature revealed that the temperature has an obviously positive influence on the hydrothermal pretreatment process of the microalgae slurry.

Exergy analyses of biogas production from microalgae biomass via anaerobic digestion

Biogas production from microalgae biomass without pretreatment and with hydrothermal pretreatment involve the energy with different quality and quantity, which makes it complex to evaluate thermodynamic performance. In this paper, exergy analyses were conducted in biogas production from microalgae biomass without pretreatment, with hydrothermal pretreatment, and with solar-driven hydrothermal pretreatment. The results showed that the materials and energy flow affected exergy efficiency in biogas production from microalgae biomass. The biogas production from microalgae biomass with solar-driven hydrothermal pretreatment achieved the highest exergy efficiency (40.85%), compared with that without pretreatment (26.2%) and with hydrothermal pretreatment (35.98%). In addition, the maximum exergy loss was caused by biogas residue, which accounted for 60.58%, 38.54%, and 35.13% of overall exergy input in biogas production from microalgae biomass without pretreatment, with hydrothermal pretreatment, and with solar-driven hydrothermal pretreatment, respectively. Exergy analyses provide important theoretical guidance to improve the performance of biogas production from microalgae biomass.

Hydrogen fermentation of organic wastewater with high ammonium concentration via electrodialysis system

An advanced electrodialysis fermentation system was set up to remove ammonium during hydrogen fermentation. When the voltage was increased from 0 to 6 V, the average ammonium removal rate was improved from 8.7 to 31.1 mg/L/h at an initial ammonium concentration of 3000 mg/L. A model based on the Nernst-Plank equation and porous media properties of ion exchange membranes was successfully implemented to predict the ammonium removal performance. When such a system was fed with synthetic wastewater at an ammonium concentration of 3000 mg/L for hydrogen fermentation, a significant increase in specific hydrogen yield was observed in the experiment group at 4 V. Specific hydrogen yield was 225.0 mL/g glucose, this value is 47.9% higher than the control. Moreover, ammonium concentration in experiment group was reduced to 701.6 mg/L at 72 h when voltage was set at 4 V, which is 63.7% lower than that in 0 V experiment group.

Wastewater-leachate treatment by microalgae: Biomass, carbohydrate and lipid production

Increases in wastewater discharges and the generation of municipal solid wastes have resulted in deleterious effects on the environment, causing eutrophication and pollution of water bodies. It is therefore necessary to investigate sustainable bioremediation alternatives. Wastewater treatment using consortia of microalgae-bacteria is an attractive alternative because it allows the removal and recycling of nutrients, with the additional advantage of biomass production and its subsequent conversion into valuable by-products. The present study aims to integrate wastewater and landfill leachate treatment with the production of microalgal biomass, considering not only its valorization in terms of lipid and carbohydrate content but also the effect of nutrient limitation on biomass formation. The effect of treating a mixture of raw wastewater with different leachate ratios (0%, 7%, 10% and 15%) was investigated using a microalgae-bacteria consortium. Two microalgae (Desmodesmus spp. and Scenedesmus obliquus) were used. Nutrient removal, biomass concentration, carbohydrate, lipid and Fatty Acid Methyl Ester (FAMEs) content and morphological changes were evaluated. Removals of 82% of NH₄⁺ and 43% of orthophosphate from a wastewater-leachate mixture (containing 167 mg/L NH₄⁺ and 23 mg/L PO₄^3-) were achieved. The highest final yield was obtained using Desmodesmus spp. (1.95 ± 0.3 g/L). The microalgae were observed to accumulate high lipid (20%) and carbohydrate (41%) contents under nutrient limiting conditions. The concentration of Polyunsaturated Fatty Acids (PUFAs) also increased. Morphological changes including the disintegration of coenobia were observed. By using a mixture of wastewater-leachate it is possible to remove nutrients, since microalgae tolerate high ammonia concentrations, and simultaneously increase the algal biomass concentration containing precursors to allow biofuel production.

Microalgal lipids production and nutrients recovery from landfill leachate using membrane photobioreactor

The aim of this work was to realize high-efficiency nutrients recovery from landfill leachate (LL) for microalgal lipids production. Negative effects of LL on microalgal lipid synthesis was revealed and a scalable membrane-based tubular photobioreactor (SM-PBR) was proposed to offset these negative effects. Microalgal biomass concentration was improved from 0 g/L in the traditional PBR to 2.13 g/L in the SM-PBR. Major operating conditions were optimized to enhance nutrients recovery and lipid productivity. The maximum N recovery efficiency of 74.31% and the maximum daily lipid production of 404.98 mg/d were obtained under the volume ratio of 5:3 (microalgae culture/LL stream) and phosphate feeding concentration of 50 mg/L. The obtained lipid was convinced to have a good combustion and anti-degradation property, with high cetane number (>52%) and low linolenic acid content (<12%). The SM-PBR provided a feasible approach for large-scale microalgal lipid production with LL.

Hydrodynamic performance of floating photobioreactors driven by wave energy

BACKGROUND

Unlike conventional cultivation systems, liquid mixing in floating photobioreactors (PBRs) is solely induced by their hydrodynamic movement in response to waves, and this movement is affected by the wave conditions (wave height and wave period), the PBR configuration and the culture depth. However, to the best of our knowledge, a practical study of the hydrodynamic movements of PBRs has not been previously conducted.

RESULTS

This study aims to investigate the hydrodynamic performance of floating PBRs in response to wave conditions. First, the effects of the experimental wave height (2-10 cm) and wave period (0.8-1.8 s) on movement was investigated using two 1.0 m2 PBR models: a square PBR (1.0 m/1.0 m; length/width) and a rectangular PBR (1.7 m/0.6 m). The results indicated that wave movement became not only more intense with increasing wave height, but also less intense when the wave period decreased. However, the square PBR experienced more intense movement than the rectangular PBR, but also little mooring force. The effects of culture depth (0.5, 1.0 and 2.0 cm) were investigated and the results showed that the culture depth significantly affected the hydrodynamic movements of the PBRs; however, the mooring forces were unaffected. Finally, the movement and mooring-line forces of PBRs equipped with different mooring systems were investigated. The use of two different mooring systems had little effect on PBR movement; however, a mooring system with floaters was able to significantly reduce the mooring line forces compared to a system without floaters. During this study, the greatest force (10.5 N) was found for the rectangular PBR using a mooring system without floaters, whereas the lowest force (0.67 N) was observed for a rectangular PBR using a mooring system with floaters.

CONCLUSIONS

These studies have provided basic data describing the fluid dynamics of floating PBRs; as well as their structural design and scale up. These results also provide guidance for the selection of ocean fields with suitable wave conditions; as well as a proper mooring methods to ensure safe operation.

Photochemical reflective optical fiber sensor for selective detection of phenol in aqueous solutions

A photochemical fiber-optic sensor was developed by integrating a plastic optical fiber (POF), polymer membrane, gold mirror, and TiO₂-based composite, and was shown to sensitively and selectively detect phenol in aqueous solution. The sensing element consisted of a thinned POF and visible-light-driven SiO₂/N-doped TiO₂ coating. The gold mirror was used to develop a reflective POF probe. The polymer membrane with high phenol permselectivity was employed to form a micro-channel between the membrane and probe. Our findings highlight the sensor's capability of phenol detection in aqueous solutions with high sensitivity of 0.294×10^-3  (mg·L^-1)^-1, pH immunity ranging from 2.0 to 14.0, and high selectivity with a limit of detection of 30  μg·L^-1.

Biodegradable branched cationic starch with high C/N ratio for Chlorella vulgaris cells concentration: Regulating microalgae flocculation performance by pH

To improve the carbon to nitrogen (C/N) ratio of harvested microalgae biomass for better producing biogas by fermentation, biodegradable cationic starch with high C/N ratio were synthesized to harvest Chlorella vulgaris. The impact of pH was also studied as the zeta potential of both microalgae and cationic starch would change with pH. Results indicated the cationic starch can harvest above 99% of the microalgae and the C/N ratio can rise from 7.50 to 7.90. The zeta potential of microalgae always kept negative and presented a trend of descending firstly and then upgrade. The maximum microalgae biomass flocculation capacity of 1 g cationic starch was 8.62 g with the help of self-flocculation at pH 3. The concentration of flocs formed at pH 11 was 25.74 g L^-1 and the diameter was 0.553 mm which was much larger than the flocs formed at pH 3 (0.208 mm).

Gemini surfactant: A novel flotation collector for harvesting of microalgae by froth flotation

Froth flotation has been proved to be a promising approach for commercial scale harvesting of microalgae. However, all the surfactants used in the microalgae flotation harvesting process are conventional monomeric surfactants contain a single similar hydrophobic group in the molecule, which results in a low harvesting efficiency. In this work, a novel Gemini surfactant, N,N'-bis(cetyldimethyl)-1,4-butane diammonium dibromide (BCBD) was prepared, and originally recommended as a collector for froth flotation harvesting of Chlorella vulgaris from culture medium. The performance of BCBD was compared with the results acquired using its conventional monomeric surfactant cetyl trimethyl ammonium bromide (CTAB). The bench-scale flotation results showed that BCBD had excellent collecting power for Chlorella vulgaris. Achieving the obviously superior flotation harvesting performance (flotation recovery increased by 21.4% and enrichment ratio increased by 22.9), the dosage of Gemini type BCBD collector is five times less than that of monomeric CTAB collector.

Treatment of Landfill Leachates with Combined Acidification/Coagulation and The Fe0/H2O2 Process

One of the major environmental concerns associated with waste disposal is the large amount of generated landfill leachates (LL), which are considered a type of wastewater with a complex composition. There is an urgent need to find an effective LL treatment method. LL were subjected to pretreatment followed by the Fe0/H2O2 process. Pretreatment efficiency was coagulation at pH 6.0 >> coagulation at pH 9.0 > acidification at pH 3.0. Coagulation at pH 6.0 in an optimal Fe3+ dose of 1000 mg/L decreased total organic carbon (TOC) from the initial concentration of 1061 mg/L to 491 mg/L while acidification to pH 3.0 decreased TOC to 824 mg/L. After acidification, the Fe0/H2O2 process with 8000/9200 mg/L Fe0/H2O2 reagent doses decreased TOC to 499 mg/L after a processing time of 60 min. Performance of the Fe0/H2O2 process after coagulation at pH 6.0 for optimal Fe0/H2O2 8000/5540 mg/L reagent doses decreased TOC to 268 mg/L (75% TOC removal). Treatment of landfill leachates with combined process coagulation and Fe0/H2O2 also increased their susceptibility to biodegradation, expressed as the biochemical oxygen demand/chemical oxygen demand (BOD5/COD) ratio from 0.13 to 0.43, allowing LL to be considered as susceptible to biodegradation. Fe0/H2O2 process kinetics was described. A statistical analysis confirmed the obtained results. The proposed method can be successfully applied for LL treatment.

A review on agro-industrial waste (AIW) derived adsorbents for water and wastewater treatment

There is a large amount of studies surrounding the usage of agro-industrial waste (AIW) for the adsorptions of organic pollutants (dyes) and inorganic pollutants (heavy metals) in water/wastewater. This method is normally treated as an alternative approach to the conventional water/wastewater treatment. However, there are some increasing interests for investigators to identify novel adsorption materials for pollutants removal. It is particularly noteworthy that most AIW wastes are not currently used at the original state, but modified in a variety of ways to reinforce the porosity and adsorption surface area of the material. Nanostructuring, activation, carbonization, and grafting are some common modification technologies of agricultural waste adsorbents. Besides, the characteristic, preparation and application of adsorbents from various industrial wastes, including natural materials and biosorbents, were summarized. Additionally, the challenges and perspectives for future researches of waste-derived adsorbents were studied. This review provides an important insight on using AIWs as precursor materials for preparing adsorbents in water/wastewater treatment.