A review on electrochemical detection of serotonin based on surface modified electrodes

Targeted degradation of refractory organic compounds in wastewaters based on molecular imprinting catalysts

Efficient removal of low-concentration refractory pollutants is a crucial problem to ensuring water safety. The use of heterogeneous catalysis of molecular imprinting technology combined with traditional catalysts is a promising method to improve removal efficiency. Presently, the research into molecular imprinting targeting catalysts focuses mainly on material preparation and performance optimization. However, more researchers are investigating other applications of imprinting materials. This review provides recent progress in photocatalyst preparation, electrocatalyst, and Fenton-like catalysts synthesized by molecular imprinting. The principle and control points of target catalysts prepared by precipitation polymerization (PP) and surface molecular imprinting (S-MIP) are introduced. Also, the application of imprinted catalysts in targeted degradation of drugs, pesticides, environmental hormones, and other refractory pollutants is summarized. In addition, the reusability and stability of imprinted catalyst in water treatment are discussed, and the possible ecotoxicity risk is analyzed. Finally, we appraised the prospects, challenges, and opportunities of imprinted catalysts in the advanced oxidation process. This paper provides a reference for the targeted degradation of refractory pollutants and the preparation of targeted catalysts.

Selective, Ultra-sensitive and Rapid Detection of Serotonin by Optimized ZnO Nanorod FET Biosensor

BACKGROUND

Fluctuation in serotonin (5-HT) level is an essential manifestation of several neurological disorders. In view of such importance, it is necessary to monitor the levels of 5-HT with good sensitivity, selectivity, affordability and low response time. Zinc oxide (ZnO) based field effect transistors (FET) with attributes like minimized noise levels and large on-off ratio are regarded as emerging high performance biosensor platforms. However, their response is significantly non-linear and there has been no appreciable endeavor for improving the non-linearity.

METHOD

In this paper, we have introduced embedded gate electrode encompassing the channel of the FET which improves the uniformity in electric field line distribution through the electrolyte and proportionately enhances the capture of target biomolecule at ultra low concentrations, thereby increasing the linearity. Further, we have incorporated the optimized parameters of ZnO nanorods reported previously, for rapid and selective detection of 5-HT.

RESULTS

It has been observed that the fabricated ZnO FET biosensor lowers the detection limit down to 0.1fM which is at least one order of magnitude lower than the existing reports. The sensor also has wide linear range from 0.1fM to 1nM with a detection time of about 20 minutes.

CONCLUSION

The proposed zinc oxide nanorod-based sensor can be used as an excellent tool for future diagnosis of neurological disorders.

A Critical Review of Carbon Quantum Dots: From Synthesis toward Applications in Electrochemical Biosensors for the Determination of a Depression-Related Neurotransmitter

Depression has become the leading cause of disability worldwide and is a global health burden. Quantitative assessment of depression-related neurotransmitter concentrations in human fluids is highly desirable for diagnosis, monitoring disease, and therapeutic interventions of depression. In this review, we focused on the latest strategies of CD-based electrochemical biosensors for detecting a depression-related neurotransmitter. We began this review with an overview of the microstructure, optical properties and cytotoxicity of CDs. Next, we introduced the development of synthetic methods of CDs, including the "Top-down" route and "Bottom-up" route. Finally, we highlighted detecting an application of CD-based electrochemical sensors in a depression-related neurotransmitter. Moreover, challenges and future perspectives on the recent progress of CD-based electrochemical sensors in depression-related neurotransmitter detection were discussed.

Sensing serotonin secreted from human serotonergic neurons using aptamer-modified nanopipettes

The serotonergic system in the human brain modulates several physiological processes, and altered serotonergic neurotransmission has been implicated in the neuropathology of several psychiatric disorders. The study of serotonergic neurotransmission in psychiatry has long been restricted to animal models, but advances in cell reprogramming technology have enabled the generation of serotonergic neurons from patient-induced pluripotent stem cells (iPSCs). While iPSC-derived human serotonergic neurons offer the possibility to study serotonin (5-HT) release and uptake, particularly by 5-HT-modulating drugs such as selective serotonin reuptake inhibitors (SSRIs), a major limitation is the inability to reliably quantify 5-HT secreted from neurons in vitro. Herein, we address this technical gap via a novel sensing technology that couples 5-HT-specific DNA aptamers into nanopores (glass nanopipettes) with orifices of ~10 nm to detect 5-HT in complex neuronal culture medium with higher selectivity, sensitivity, and stability than existing methods. The 5-HT aptamers undergo conformational rearrangement upon target capture and serve as gatekeepers of ionic flux through the nanopipette opening. We generated human serotonergic neurons in vitro and detected secreted 5-HT using aptamer-coated nanopipettes in a low nanomolar range, with the possibility of detecting significantly lower (picomolar) concentrations. Furthermore, as a proof of concept, we treated human serotonergic neurons in vitro with the SSRI citalopram and detected a significant increase in extracellular 5-HT using the aptamer-modified nanopipettes. We demonstrate the utility of such methods for 5-HT detection, raising the possibility of fast quantification of neurotransmitters secreted from patient-derived live neuronal cells.

Dimeric-serotonin bivalent ligands induced gold nanoparticle aggregation for highly sensitive and selective serotonin biosensor

Chemically modulating monoamine neurotransmitter serotonin undergoes a physiological reaction of enzyme intermediated peroxidation to reconstruct dimeric self-assembled complex. A standard bivalent ligand approach dimeric serotonin increases structural and functional scaffolding with recognition-binding sites that are fundamentally more friendly than monovalent binding sites. Dimerization reaction accelerates the catalytic activity of one-electron oxidation at the C(4) position of serotonin to generate dual phenolic radicals in the presence of horseradish (HRP) and hydrogen peroxide (H₂O₂). Herein, we suggest the dimeric serotonin-based colorimetric assay, which presents a new rapid, sensitive, selective, and quantitative visualization. The dimeric serotonin possesses the capability to recognize intermolecular interaction units that cause aggregation scaffold of gold nanoparticles (GNPs), providing inexpensive and straightforward analytical needs. As a proof of visual and spectral analysis, peroxidative dimeric serotonin demonstrated sensitive and robust results. The calorimetric method enables highly sensitive detection of serotonin in phosphate buffer, and in human serum samples at nanomolar levels with a LOD of 2.6 nM and 2.81 nM, respectively, and the sensor possesses a dynamic range of 100-300 nM in buffer condition. Also, as proof of concept, visible color imaging of immunosensors which is appropriate for fast visible testing at detection limits as low as 2.90 nM concentration.

Synergizing Functional Nanomaterials with Aptamers Based on Electrochemical Strategies for Pesticide Detection: Current Status and Perspectives

Owing to the high toxicity and large-scale use of pesticides, it is imperative to develop selective, sensitive, portable, and convenient sensors for rapid monitoring of pesticide. Therefore, the electrochemical detection platform offers a promising analytical approach since it is easy to operate, economical, efficient, and user-friendly. Meanwhile, with advances in functional nanomaterials and aptamer selection technologies, numerous sensitivity-enhancement techniques alongside a widespread range of smart nanomaterials have been merged to construct novel aptamer probes to use in the biosensing field. Hence, this study intends to highlight recent development and promising applications on the functional nanomaterials with aptamers for pesticides detection based on electrochemical strategies. We also reviewed the current novel aptamer-functionalized microdevices for the portability of pesticides sensors. Furthermore, the major challenges and future prospects in this field are also discussed to provide ideas for further research.

Electroanalysis of Biomolecules: Rational Selection of Sensor Construction

Methods of electrochemical analysis of biological objects based on the reaction of electro-oxidation/electro-reduction of molecules are presented. Polymer nanocomposite materials that modify electrodes to increase sensitivity of electrochemical events on the surface of electrodes are described. Examples of applications electrochemical biosensors constructed with nanocomposite material for detection of biological molecules are presented, advantages and drawbacks of different applications are discussed.

Aptamer Conformational Change Enables Serotonin Biosensing with Nanopipettes

We report artificial nanopores in the form of quartz nanopipettes with ca. 10 nm orifices functionalized with molecular recognition elements termed aptamers that reversibly recognize serotonin with high specificity and selectivity. Nanoscale confinement of ion fluxes, analyte-specific aptamer conformational changes, and related surface charge variations enable serotonin sensing. We demonstrate detection of physiologically relevant serotonin amounts in complex environments such as neurobasal media, in which neurons are cultured in vitro. In addition to sensing in physiologically relevant matrices with high sensitivity (picomolar detection limits), we interrogate the detection mechanism via complementary techniques such as quartz crystal microbalance with dissipation monitoring and electrochemical impedance spectroscopy. Moreover, we provide a novel theoretical model for structure-switching aptamer-modified nanopipette systems that supports experimental findings. Validation of specific and selective small-molecule detection, in parallel with mechanistic investigations, demonstrates the potential of conformationally changing aptamer-modified nanopipettes as rapid, label-free, and translatable nanotools for diverse biological systems.

Current strategies with sensing technologies to eliminate stress cardiomyopathy

Stress cardiomyopathy refers weakening of heart muscle due to the continuous stress. Generally, the severe status of stress cardiomyopathy has been revealed after damaging the muscles and measured by the physical changes in the heart system. To overcome this issue, biosensor can be used, which could eliminate the late identification stress cardiomyopathy. With biosensors, different stress markers such as epinephrine, dopamine, catecholamine, α-amylase, norepinephrine, serotonin and cortisol have been identified by a wide range of developments. These biosensors are available from laboratory to industry at the ranges of nano to macrodevices. To merge with the identification of stress cardiomyopathy, the above strategies might be utilized properly and can aid to reduce the stress-related problems. This overview gleaned the currently available biosensing methods and the associated biomarkers at various stages of the developments and implementations of stress cardiomyopathy.

Serotonin level as a potent diabetes biomarker based on electrochemical sensing: a new approach in a zebra fish model

Serotonin (5-HT) levels have been associated with several exclusively metabolic disorders. Herein, a new approach for 5-HT level as a novel biomarker of diabetes mellitus is considered using a simple nanocomposite and HPLC method. Reduced graphene oxide (rGO) comprising gold nanoparticles (AuNPs) was decorated with 18-crown-6 (18.Cr.6) to fabricate a simple nanocomposite (rGO-AuNPs-18.Cr.6). The nanocomposite was positioned on a glassy carbon electrode (GCE) to form an electrochemical sensor for the biomarker 5-HT in the presence of L-tryptophan (L-Trp), dopamine (DA), ascorbic acid (AA), urea, and glucose. The nanocomposite exhibited efficient catalytic activity for 5-HT detection by square-wave voltammetry (SWV). The proposed sensor displayed high selectivity, excellent reproducibility, notable anti-interference ability, and long-term stability even after 2 months. SWV defined a linear range of 5-HT concentration from 0.4 to 10 μg L^-1. A diabetic animal model (diabetic zebrafish model) was then applied to investigate 5-HT as a novel biomarker of diabetes. A limit of detection (LOD) of about 0.33 μg L^-1 was found for the diabetic group and 0.15 μg L^-1 for the control group. The average levels of 5-HT obtained were 9 and 2 μg L^-1 for control and diabetic groups, respectively. The recovery, relative standard deviation (RSD), and relative error (RE) were found to be about 97%, less than 2%, and around 3%, respectively. The significant reduction in 5-HT level in the diabetic group compared to the control group proved that the biomarker 5-HT can be applied for the early diagnosis of diabetes mellitus.

Nanomaterials Based Electrochemical Sensors for Serotonin Detection: A Review

The present review deals with the recent progress made in the field of the electrochemical detection of serotonin by means of electrochemical sensors based on various nanomaterials incorporated in the sensitive element. Due to the unique chemical and physical properties of these nanomaterials, it was possible to develop sensitive electrochemical sensors with excellent analytical performances, useful in the practice. The main electrochemical sensors used in serotonin detection are based on carbon electrodes modified with carbon nanotubes and various materials, such as benzofuran, polyalizarin red-S, poly(L-arginine), Nafion/Ni(OH)2, or graphene oxide, incorporating silver-silver selenite nanoparticles, as well as screen-printed electrodes modified with zinc oxide or aluminium oxide. Also, the review describes the nanocomposite sensors based on conductive polymers, tin oxide-tin sulphide, silver/polypyrole/copper oxide or a hybrid structure of cerium oxide-gold oxide nanofibers together with ruthenium oxide nanowires. The presentation focused on describing the sensitive materials, characterizing the sensors, the detection techniques, electroanalytical properties, validation and use of sensors in lab practice.

Glassy carbon microelectrode arrays enable voltage-peak separated simultaneous detection of dopamine and serotonin using fast scan cyclic voltammetry

Glassy carbon (GC) microelectrode arrays can simultaneously discriminate the reduction and oxidation peaks of dopamine and serotonin at low concentrations (10–200 nM). They demonstrated fast electron transfer kinetics and good fouling properties.

Selective nanomolar electrochemical detection of serotonin, dopamine and tryptophan using TiO2/RGO/CPE – influence of reducing agents

TiO2/RGO nanocomposites were synthesised via a simple one-pot hydrothermal method and used as a modifier in carbon paste electrode for the sensitive determination of serotonin.

Nanomaterials in Electrochemical Sensing Area: Applications and Challenges in Food Analysis

Recently, nanomaterials have received increasing attention due to their unique physical and chemical properties, which make them of considerable interest for applications in many fields, such as biotechnology, optics, electronics, and catalysis. The development of nanomaterials has proven fundamental for the development of smart electrochemical sensors to be used in different application fields such, as biomedical, environmental, and food analysis. In fact, they showed high performances in terms of sensitivity and selectivity. In this report, we present a survey of the application of different nanomaterials and nanocomposites with tailored morphological properties as sensing platforms for food analysis. Particular attention has been devoted to the sensors developed with nanomaterials such as carbon-based nanomaterials, metallic nanomaterials, and related nanocomposites. Finally, several examples of sensors for the detection of some analytes present in food and beverages, such as some hydroxycinnamic acids (caffeic acid, chlorogenic acid, and rosmarinic acid), caffeine (CAF), ascorbic acid (AA), and nitrite are reported and evidenced.

Printing-Based Assay and Therapy of Antioxidants

Antioxidants are essential in regulating various physiological functions and oxidative deterioration. Over the past decades, many researchers have paid attention to antioxidants and studied the screening of antioxidants from natural products and their utilization for treatments in diverse pathological conditions. Nowadays, as printing technology progresses, its influence in the field of biomedicine is growing significantly. The printing technology has many advantages. Especially, the capability of designing sophisticated platforms is useful to detect antioxidants in various samples. The high flexibility of 3D printing technology is advantageous to create geometries for customized patient treatment. Recently, there has been increasing use of antioxidant materials for this purpose. This review provides a comprehensive overview of recent advances in printing technology-based assays to detect antioxidants and 3D printing-based antioxidant therapy in the field of tissue engineering. This review is divided into two sections. The first section highlights colorimetric assays using the inkjet-printing methods and electrochemical assays using screen-printing techniques for the determination of antioxidants. Alternative screen-printing techniques, such as xurography, roller-pen writing, stamp contact printing, and laser-scribing, are described. The second section summarizes the recent literature that reports antioxidant-based therapy using 3D printing in skin therapeutics, tissue mimetic 3D cultures, and bone tissue engineering.

Structural refinement and electrochemical properties of one dimensional (ZnO NRs)1-x(CNs)x functional hybrids for serotonin sensing studies

Herein, the efficient serotonin (5-HT) sensing studies have been conducted using the (ZnO NRs)1-x(CNs)x nanocomposites (NCs) having appropriate structural and electrochemical properties. Initially, the different compositions of ZnO nanorods (NRs), with varying content of carbon nanostructures (CNs=MWCNTs and RGO), are prepared using simple in-situ wet chemical method and thereafter these NCs have been characterized for physico-chemical properties in correlation to the 5-HT sensing activity. XRD Rietveld refinement studies reveal the hexagonal Wurtzite ZnO NRs oriented in (101) direction with space group 'P63mc' and both orientation as well as phase of ZnO NRs are also retained in the NCs due to the small content of CNs. The interconnectivity between the ZnO NRs with CNs through different functional moieties is also studied using FTIR analysis; while phases of the constituents are confirmed through Raman analysis. FESEM images of the bare/NCs show hexagonal shaped rods with higher aspect ratio (4.87) to that of others. BET analysis and EIS measurements reveal the higher surface area (97.895 m2/g), lower charge transfer resistance (16.2 kΩ) for the ZCNT 0.1 NCs to that of other NCs or bare material. Thereafter, the prepared NCs are deposited on the screen printed carbon electrode (SPCE) using chitosan as cross-linked agent for 5-HT sensing studies; conducted through cyclic voltammetry (CV) and square wave voltammetry (SWV) measurements. Among the various composites, ZCNT0.1 NCs based electrodes exhibit higher sensing activity towards 5-HT in accordance to its higher surface area, lower particle size and lower charge transfer resistance. SWV measurements provide a wide linear response range (7.5-300 μM); lower limit of detection (0.66 μM), excellent limit of quantification (2.19 μM) and good reproducibility to ZCNT 0.1 NCs as compared to others for 5-HT sensing studies.

A new nickel-based co-crystal complex electrocatalyst amplified by NiO dope Pt nanostructure hybrid; a highly sensitive approach for determination of cysteamine in the presence of serotonin

A highly sensitive electrocatalytic sensor was designed and fabricated by the incorporation of NiO dope Pt nanostructure hybrid (NiO–Pt–H) as conductive mediator, bis (1,10 phenanthroline) (1,10-phenanthroline-5,6-dione) nickel(II) hexafluorophosphate (B,1,10,P,1,10, PDNiPF6), and electrocatalyst into carbon paste electrode (CPE) matrix for the determination of cysteamine. The NiO–Pt–H was synthesized by one-pot synthesis strategy and characterized by XRD, elemental mapping analysis (MAP), and FESEM methods. The characterization data, which confirmed good purity and spherical shape with a diameter of ⁓ 30.64 nm for the synthesized NiO–Pt–H. NiO–Pt–H/B,1,10, P,1,10, PDNiPF6/CPE, showed an excellent catalytic activity and was used as a powerful tool for the determination of cysteamine in the presence of serotonin. The NiO–Pt–H/B,1,10, P,1,10, PDNiPF6/CPE was able to solve the overlap problem of the two drug signals and was used for the determination of cysteamine and serotonin in concentration ranges of 0.003–200 µM and 0.5–260 µM with detection limits of 0.5 nM and 0.1 µM, using square wave voltammetric method, respectively. The NiO–Pt–H/B,1,10,P,1,10,PDNiPF6/CPE showed a high-performance ability for the determination of cysteamine and serotonin in the drug and pharmaceutical serum samples with the recovery data of 98.1–103.06%.

Employing Conductive Metal-Organic Frameworks for Voltammetric Detection of Neurochemicals

This paper describes the first implementation of an array of two-dimensional (2D) layered conductive metal-organic frameworks (MOFs) as drop-casted film electrodes that facilitate voltammetric detection of redox active neurochemicals in a multianalyte solution. The device configuration comprises a glassy carbon electrode modified with a film of conductive MOF (M₃HXTP₂; M = Ni, Cu; and X = NH, 2,3,6,7,10,11-hexaiminotriphenylene (HITP) or O, 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP)). The utility of 2D MOFs in voltammetric sensing is measured by the detection of ascorbic acid (AA), dopamine (DA), uric acid (UA), and serotonin (5-HT) in 0.1 M PBS (pH = 7.4). In particular, Ni₃HHTP₂ MOFs demonstrated nanomolar detection limits of 63 ± 11 nM for DA and 40 ± 17 nM for 5-HT through a wide concentration range (40 nM-200 μM). The applicability in biologically relevant detection was further demonstrated in simulated urine using Ni₃HHTP₂ MOFs for the detection of 5-HT with a nanomolar detection limit of 63 ± 11 nM for 5-HT through a wide concentration range (63 nM-200 μM) in the presence of a constant background of DA. The implementation of conductive MOFs in voltammetric detection holds promise for further development of highly modular, sensitive, selective, and stable electroanalytical devices.

Antibody-Electroactive Probe Conjugates Based Electrochemical Immunosensors

Suitable immobilization of a biorecognition element, such as an antigen or antibody, on a transducer surface is essential for development of sensitive and analytically reliable immunosensors. In this review, we report on (1) methods of antibody prefunctionalization using electroactive probes, (2) methods for immobilization of such conjugates on the surfaces of electrodes in electrochemical immunosensor construction and (3) the use of antibody-electroactive probe conjugates as bioreceptors and sensor signal generators. We focus on different strategies of antibody functionalization using the redox active probes ferrocene (Fc), anthraquinone (AQ), thionine (Thi), cobalt(III) bipyridine (Co(bpy)33+), Ru(bpy)32+ and horseradish peroxidase (HRP). In addition, new possibilities for antibody functionalization based on bioconjugation techniques are presented. We discuss strategies of specific, quantitative antigen detection based on (i) a sandwich format and (ii) a direct signal generation scheme. Further, the integration of different nanomaterials in the construction of these immunosensors is presented. Lastly, we report the use of a redox probe strategy in multiplexed analyte detection.

Enhancement of Signal-to-Noise Ratio for Serotonin Detection with Well-Designed Nanofilter-Coated Potentiometric Electrochemical Biosensor

In this paper, we proposed to enhance a signal-to-noise (S/N) ratio for detecting a primary stress marker, serotonin, using a potentiometric biosensor modified by a well-designed nanofilter film. An extended-Au-gate field-effect transistor (EG-Au-gate FET) biosensor exhibits highly sensitive electrochemical detection toward various small biomolecules, including serotonin. Therefore, to enhance the S/N ratio for the serotonin detection, we designed an appropriate nanofilter film on the Au electrode by combining the aryldiazonium salt reduction strategy and boronate affinity. That is, only serotonin can approach the Au sensing surface to generate an electrical signal; interfering biomolecules are prevented from penetrating through the nanofilter, either because large interfering biomolecules cannot permeate through the highly dense, nanoporous multilayer film, or because phenylboronic acids included in the nanofilter captures small interfering biomolecules (e.g., catecholamines). The potentiometric biosensor modified by such a nanofilter film detected serotonin in a model sample solution containing catecholamines, cortisol, and human serum albumin with a high S/N ratio for the serotonin levels in the blood. Furthermore, we found that the effect of the nanofilter directly reflects the binding affinity of the receptors such as phenylboronic acids included in the nanofilter; thus, the selectivity and dynamic range of small target biomolecules can be tuned freely by designing the appropriate receptors for the nanofilter. The results show that a well-designed nanofilter biointerface can be a versatile biosensing platform for point-of-care testing, particularly for a simple stress check.

[Electroanalytical and electrocatalytical characteristics of cytochrome P450 3A4 using electrodes modified with nanocomposite carbon nanomaterials]

The electroanalytical characteristics of recombinant cytochrome P450 3A4 (P450 3A4) immobilized on the surface of screen-printed graphite electrodes modified with multi-walled carbon nanotubes have been studied. The role and the influence of graphite working electrode modification with carbon nanotubes on electroanalytical characteristics of cytochrome P450 3A4 have been demonstrated. The conditions for the immobilization of cytochrome P450 3A4 on the obtained screen-printed graphite electrodes modified with carbon multi-walled nanotubes have been optimized. The electrochemical parameters of the oxidation and reduction of the heme iron of the enzyme have been estimated. The midpoint potential E0' was -0.35±0.01 V vs Ag/AgCl; the calculated heterogeneous electron transfer rate constant ks, was 0.57±0.04 s-1; the amount of electroactive cytochrome P450 3A4 on the electrode Г0, was determined as (2.6±0.6)⋅10-10 mol/cm2. The functioning mechanism of P450 3A4-based electrochemical sensor followed the "protein film voltammetry". In order to develop electrochemical analysis of drugs being substrates of that hemoprotein and respective medical biosensors the voltammetric study of catalytic activity of immobilized cytochrome P450 3A4 was carried out. Electrocatalytic properties of cytochrome P450 3A4, immobilized on modified screen-printed graphite electrodes, has been investigated using erythromycin (macrolide antibiotics). It has been shown that the modification of electrodes plays a decisive role for the study of the properties of cytochromes P450 in electrochemical investigations. Smart electrodes can serve as sensors for analytical purposes, as well as electrocatalysts for the study of biotransformation processes and metabolic processes. Electrodes modified with carbon nanomaterials are applicable for analytical purposes in the registration of hemoproteins. Electrodes modified with synthetic membrane-like compounds (e.g. didodecyldimethylammonium bromide) are effective in enzyme-dependent electrocatalysis.

Enzymatic Platforms for Sensitive Neurotransmitter Detection

A convenient electrochemical sensing pathway was investigated for neurotransmitter detection based on newly synthesized silole derivatives and laccase/horseradish-peroxidase-modified platinum (Pt)/gold (Au) electrodes. The miniature neurotransmitter's biosensors were designed and constructed via the immobilization of laccase in an electroactive layer of the Pt electrode coated with poly(2,6-bis(3,4-ethylenedioxythiophene)-4-methyl-4-octyl-dithienosilole) and laccase for serotonin (5-HT) detection, and a Au electrode modified with the electroconducting polymer poly(2,6-bis(selenophen-2-yl)-4-methyl-4-octyl-dithienosilole), along with horseradish peroxidase (HRP), for dopamine (DA) monitoring. These sensing arrangements utilized the catalytic oxidation of neurotransmitters to reactive quinone derivatives (the oxidation process was provided in the enzymes' presence). Under the optimized conditions, the analytical performance demonstrated a convenient degree of sensitivity: 0.0369 and 0.0256 μA mM-1 cm-2, selectivity in a broad linear range (0.1-200) × 10-6 M) with detection limits of ≈48 and ≈73 nM (for the serotonin and dopamine biosensors, respectively). Moreover, the method was successfully applied for neurotransmitter determination in the presence of interfering compounds (ascorbic acid, L-cysteine, and uric acid).

Real-time in vivo detection techniques for neurotransmitters: a review

Functional synapses in the central nervous system depend on a chemical signal exchange process that involves neurotransmitter delivery between neurons and receptor cells in the neuro system.

Enzyme Kinetics via Open Circuit Potentiometry

We demonstrate the application of open circuit potentiometry (OCP) to measure enzyme turnover kinetics, k_turn. The electrode surface will become poised by the addition of a well-behaved redox pair, such as ferrocenemethanol/ferrocenium methanol (FcMeOH/FcMeOH⁺), which acts as the cosubstrate for the enzymatic process. A measurable change in potential results when an enzyme consumes the one-electron transfer mediator. Glucose oxidase was studied as a test-case, but the method is generalizable across oxidoreductase enzymes that rely on electron transfer mediators. In the presence of glucose and FcMeOH⁺, glucose oxidase delivers electrons to FcMeOH⁺, and the potential changes with respect to the Nernst equation. A theoretical model incorporating enzymatic rate expressions into the Nernst equation was derived to explain the observed potential transients, and experimental data fit theory well. A similar experiment was performed using amperometry on ultramicroelectrodes (UMEs). Here, the same enzymatic rate expression may be incorporated into the equation for steady-state flux to an UME to obtain k_turn. While similar kinetic information was obtained from the potentiometric and amperometric responses, potentiometry is independent of electrode size and mass transfer effects. Finally, we show how k_turn changes as a function of one-electron mediator. Our results may eventually find applications to biosensors, where electrode fouling plagues long-term sensor performance.

Electrochemical detection of serotonin: A new approach

Serotonin (5-hydroxytryptamine, 5-HT) is an important neurotransmitter which plays a significant role in various functions in the body, such as appetite, emotions, and autonomic functions. It is well known that biomarker 5-HT levels can be correlated to several diseases and disorders such as depression, anxiety, irritable bowel, and sleep trouble. Among various methods for detecting the 5-HT biomarker, electrochemical techniques have attracted great interest due to their low cost and ease of operation. However, sensitive and precise electrochemical detection of 5-HT levels is not possible using bare electrodes, thus requiring electrode modification. The present review aims to describe the different electroanalytical methods for 5-HT detection using various surface-modified electrodes such as glassy carbon, carbon fiber, diamond, graphite, and metal electrodes modified with conductive polymers. Perspectives and the modification of electrode surface using applied polymers for 5-HT detection have also been presented.

A novel electrochemical sensor based on molecularly imprinted polymer modified hollow N, S-Mo2C/C spheres for highly sensitive and selective carbendazim determination

A novel electrochemical sensor based on nitrogen and sulfur doped hollow Mo₂C/C spheres (N, S-Mo₂C) and molecularly imprinted polymer (MIP) was proposed for carbendazim (CBD) determination. The N, S-Mo₂C were prepared by first nitrogen and sulfur doping via one-pot method and subsequent carbonization at high temperature. A film of MIP was then fabricated in situ on the N, S-Mo₂C surface by electropolymerization, with CBD acting as template molecule and o-phenylenediamine as functional monomer. The N, S-Mo₂C were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and electrochemical behaviors of CBD on differently modified electrodes were explored by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Under the optimal conditions, a calibration curve of current shift versus the logarithm of CBD concentration was obtained in the range of 1×10^-12 ∼ 8×10^-9 M with a detection limit of 6.7×10^-13 M (S/N=3). Moreover, the proposed sensor exhibited favorable stability and selectivity, and was applied to analyze pesticide residues in fruits and vegetables with decent accuracy.

In-situ synthesis of 3D ultra-small gold augmented graphene hybrid for highly sensitive electrochemical binding capability

The fascinating properties of graphene can be augmented with other nanomaterials to generate hybrids to design innovative applications. Contrary to the conventional methodologies, we showed a novel yet simple, in-situ, biological approach which allowed for the effective growth of gold nanostructures on graphene surfaces (3D Au NS@GO). The morphology of the obtained hybrid consisted of sheets of graphene, anchoring uniform dispersion of ultra-small gold nanostructures of about 2-8 nm diameter. Surface plasmon resonance at 380 nm confirmed the nano-regimen of the hybrid. Fourier transform infrared spectroscopy indicated the utilization of amine spacers to host gold ions leading to nucleation and growth. The exceptional positive surface potential of 55 mV suggest that the hybrid as an ideal support for electrocatalysis. Ultimately, the hybrid was found to be an efficient receptor material for electrochemical performance towards the binding of uric acid which is an important biomolecule of human metabolism. The designed material enabled the detection of uric acid concentrations as low as 30 nM. This synthesis strategy is highly suitable to design new hybrid materials with interesting morphology and outstanding properties for the identification of clinically relevant biomolecules.

A novel disposable self-adhesive inked paper device for electrochemical sensing of dopamine and serotonin neurotransmitters and biosensing of glucose

In this work, we detail the progress of a novel electrochemical disposable device, which has a relatively low cost and easy production, with a novel conductive ink, that consists of graphite and automotive varnish mixture, deposited over a self-adhesive paper, granting an easy production with relatively low cost. The electrode surface was characterized by scanning electron microscopy, X-ray powder diffraction and Fourier transforms infrared and Raman, cyclic voltammetry and electrochemical impedance spectroscopies. In addition, the proposed electrode was applied for individual electrochemical determination of dopamine and serotonin. The device achieved a linear response between 30 and 800 μmol L^-1 and a limit of detection (LOD) of 0.13 μmol L^-1, by square wave voltammetry for dopamine and a linear range from 6.0 to 100 μmol L^-1, with a LOD of 0.39 μmol L^-1, by differential pulse voltammetry for serotonin. Later, the working electrode was modified with glucose oxidase and dihexadecyl phosphate film in order to obtain a biosensor. At this stage, CV was applied to detect glucose in the range of 1.0-10 μmol L^-1 and LOD of 0.21 μmol L^-1. By three different techniques and analytes, the sensoring and biosensoring processes presented high reproducibility. The proposed adhesive electrode is easy to prepare, disposable, within non-restrictive nature, which allows an approach of a new device for electrochemical sensing and biosensing.