Ti3C2 MXenes nanosheets catalyzed highly efficient electrogenerated chemiluminescence biosensor for the detection of exosomes

Ratiometric Electrochemiluminescence Sensing of Carcinoembryonic Antigen Based on Luminol

Ratiometric electrochemiluminescence (ECL) sensors can efficiently remove environmental interference to attain precise detection. Nonetheless, two eligible luminophores or coreactants were usually needed, increasing the complexity and restricting their practical application. In this study, a single luminophore of luminol with a single coreactant of H₂O₂ was employed to construct a dual-potential ratiometric ECL sensor for the detection of carcinoembryonic antigen (CEA). The produced palladium nanoclusters (Pd NCs) employing a DNA duplex as a template could not only stimulate luminol to produce cathodic ECL (I_cathodic) but also quench its anodic ECL (I_anodic). During the detection process, CEA could damage the double-stranded structure and reduce the Pd NCs' amount, triggering a significant decrease in the ratio of I_cathodic to I_anodic (I_cathodic/I_anodic) and thereby achieving sensitive CEA's detection. Furthermore, the I_cathodic/I_anodic was independent of the H₂O₂ concentration, which avoided a prejudicial effect from H₂O₂ decomposition and considerably enhanced the detection's reliability. The developed ratiometric ECL sensor demonstrated a sensitive detection toward CEA with a wide linear range from 100 ag/mL to 10 ng/mL and a detection limit of 87.1 ag/mL (S/N = 3). In conclusion, this study offers a new idea for constructing ratiometric ECL sensors based on a single luminophore and technical support for cancer's early diagnosis.

Novel Electrochemical Aptasensor Based on Ordered Mesoporous Carbon/2D Ti3C2 MXene as Nanocarrier for Simultaneous Detection of Aminoglycoside Antibiotics in Milk

Herein, a novel electrochemical aptasensor using a broad-spectrum aptamer as a biorecognition element was constructed based on a screen-printed carbon electrode (SPCE) for simultaneous detection of aminoglycoside antibiotics (AAs). The ordered mesoporous carbon (OMC) was firstly modified on 2D Ti₃C₂ MXene. The addition of OMC not only effectively improved the stability of the aptasensor, but also prevented the stacking of Ti₃C₂ sheets, which formed a good current passage for signal amplification. The prepared OMC@Ti₃C₂ MXene functioned as a nanocarrier to accommodate considerable aptamers. In the presence of AAs, the transport of electron charge on SPCE surface was influenced by the bio-chemical reactions of the aptamer and AAs, generating a significant decline in the differential pulse voltammetry (DPV) signals. The proposed aptasensor presented a wide linear range and the detection limit was 3.51 nM. Moreover, the aptasensor, with satisfactory stability, reproducibility and specificity, was successfully employed to detect the multi-residuals of AAs in milk. This work provided a novel strategy for monitoring AAs in milk.

Metal-organic frameworks as a therapeutic strategy for lung diseases

Lung diseases remain a global burden today. Lower respiratory tract infections alone cause more than 3 million deaths worldwide each year and are on the rise every year. In particular, with coronavirus disease raging worldwide since 2019, we urgently require a treatment for lung disease. Metal organic frameworks (MOFs) have a broad application prospect in the biomedical field due to their remarkable properties. The unique properties of MOFs allow them to be applied as delivery materials for different drugs; diversified structural design endows MOFs with diverse functions; and they can be designed as various MOF-drug synergistic systems. This review concentrates on the synthesis design and applications of MOF based drugs against lung diseases, and discusses the possibility of preparing MOF-based inhalable formulations. Finally, we discuss the chances and challenges of using MOFs for targeting lung diseases in clinical practice.

Understanding the bidirectional interactions between two-dimensional materials, microorganisms, and the immune system

Two-dimensional (2D) materials such as the graphene-based materials, transition metal dichalcogenides, transition metal carbides and nitrides (MXenes), black phosphorus, hexagonal boron nitride, and others have attracted considerable attention due to their unique physicochemical properties. This is true not least in the field of medicine. Understanding the interactions between 2D materials and the immune system is therefore of paramount importance. Furthermore, emerging evidence suggests that 2D materials may interact with microorganisms - pathogens as well as commensal bacteria that dwell in and on our body. We discuss the interplay between 2D materials, the immune system, and the microbial world in order to bring a systems perspective to bear on the biological interactions of 2D materials. The use of 2D materials as vectors for drug delivery and as immune adjuvants in tumor vaccines, and 2D materials to counteract inflammation and promote tissue regeneration, are explored. The bio-corona formation on and biodegradation of 2D materials, and the reciprocal interactions between 2D materials and microorganisms, are also highlighted. Finally, we consider the future challenges pertaining to the biomedical applications of various classes of 2D materials.

Advances and emerging challenges in MXenes and their nanocomposites for biosensing applications

Two-dimensional materials have unique properties and their better functionality has created new paradigms in the field of sensing. Over the past decade, a new family of 2D materials known as MXenes has emerged as a promising material for numerous applications, including biosensing. Their metallic conductivity, rich surface chemistry, hydrophilicity, good biocompatibility, and high anchoring capacity for biomaterials make them an attractive candidate to detect a variety of analytes. Despite such notable properties, there are certain limitations associated with them. This review aims to present a detailed survey of MXene's synthesis; in particular, their superiority in the field of biosensing as compared to other 2D materials is addressed. Their low oxidative stability is still an open challenge, and recent investigations on MXene's oxidation are summarized. The hexagonal stacking network of MXenes acts as a distinctive matrix to load nanoparticles, and the embedded nanoparticles can bind an excess number of biomolecules (e.g., antibodies) thereby improving biosensor performance. We will also discuss the synthesis and corresponding performance of MXenes nanocomposites with noble metal nanoparticles and magnetic nanoparticles. Furthermore, Nb and Ti2C-based MXenes, and Ti3C2-MXene sandwich immunoassays are also reviewed in view of their importance. Different aspects and challenges associated with MXenes (from their synthesis to final applications) and the future perspectives described give new directions to fabricate novel biosensors.

Gold nanoparticle-based signal amplified electrochemiluminescence for biosensing applications

Since the content levels of biomarkers at the early stage of many diseases are generally lower than the detection threshold concentration, achieving ultrasensitive and accurate detection of these biomarkers is still one of the major goals in bio-analysis. To achieve ultrasensitive and reliable bioassay, it requires developing highly sensitive biosensors. Among all kinds of biosensors, electrogenerated chemiluminescence (ECL) based biosensors have attracted enormous attention due to their excellent properties. In order to improve the performance of ECL biosensors, gold nanoparticles (Au NPs) have been widely utilized as signal amplification tags. The introduction of Au NPs could dramatically enhance the performance of the constructed ECL biosensors via diverse ways such as electrode modification material, efficient energy acceptor in ECL resonant energy transfer (ECL-RET), reaction catalyst, surface plasmon resonance (SPR) enhancer, and as nanocarrier. Herein, we summarize recent developments and progress of ECL biosensors based on Au NPs signal amplification strategies. We will cover ECL applications of Au NPs as a signal amplification tag in the detection of proteins, metal ions, nucleic acids, small molecules, living cells, exosomes, and cell imaging. Finally, brief summary and future outlooks of this field will be presented.

Aptamers as Recognition Elements for Electrochemical Detection of Exosomes

Exosome analysis is emerging as an attractive noninvasive approach for disease diagnosis and treatment monitoring in the field of liquid biopsy. Aptamer is considered as a promising molecular probe for exosomes detection because of the high binding affinity, remarkable specificity, and low cost. Recently, many approaches have been developed to further improve the performance of electrochemical aptamer based(E-AB) sensors with a lower limit of detection. In this review, we focus on the development of using aptamer as a specific recognition element for exosomes detection in electrochemical sensors. We first introduce recent advances in evolving aptamers against exosomes. Then, we review methods of immobilization aptamers on electrode surfaces, followed by a summary of the main strategies of signal amplification. Finally, we present the insights of the challenges and future directions of E-AB sensors for exosomes analysis.

ORAOV 1 Detection Made with Metal Organic Frameworks Based on Ti3C2Tx MXene

In this work, a two-dimensional (2D) MOF sheet with electrochemiluminescence (ECL) activity is prepared with Ti3C2Tx MXene as the metal precursor and the meso-tetra(4-carboxyl-phenyl) porphyrin (H2TCPP) as the organic ligand. The atomically thin 2D Ti3C2Tx MXene is utilized as the metal precursor and soft template to produce the MOF with a 2D nanosheet morphology (Ti3C2Tx-PMOF). Ti3C2Tx MXene is a kind of strong electron acceptor, which can deprotonate H2TCPP due to the high electronegativity and low work function of its terminal atoms. The deprotonated H2TCPP continues to bind with Ti atoms to form the 2D MOF sheet. The ECL activity is inherited from H2TCPP and stabilized by introducing Ag NPs. Then, we construct an ECL biosensor based on the Ag NPs/Ti3C2Tx-PMOF to detect the oral cancer overexpressed 1 (ORAOV 1). A bipedal three-dimensional DNA walker strategy is adopted to further improve the biosensor sensitivity. As expected, the biosensor exhibits sterling sensitivity and selectivity. The ECL biosensor responds linearly to ORAOV 1 concentrations in the range of 10 fM-1 nM, and the detection limit is as low as 3.3 fM (S/N = 3). It means that Ag NPs/Ti3C2Tx-PMOF is a potential material to design and construct the high-performance ECL biosensors.

Next-Generation Intelligent MXene-Based Electrochemical Aptasensors for Point-of-Care Cancer Diagnostics

Delayed diagnosis of cancer using conventional diagnostic modalities needs to be addressed to reduce the mortality rate of cancer. Recently, 2D nanomaterial-enabled advanced biosensors have shown potential towards the early diagnosis of cancer. The high surface area, surface functional groups availability, and excellent electrical conductivity of MXene make it the 2D material of choice for the fabrication of advanced electrochemical biosensors for disease diagnostics. MXene-enabled electrochemical aptasensors have shown great promise for the detection of cancer biomarkers with a femtomolar limit of detection. Additionally, the stability, ease of synthesis, good reproducibility, and high specificity offered by MXene-enabled aptasensors hold promise to be the mainstream diagnostic approach. In this review, the design and fabrication of MXene-based electrochemical aptasensors for the detection of cancer biomarkers have been discussed. Besides, various synthetic processes and useful properties of MXenes which can be tuned and optimized easily and efficiently to fabricate sensitive biosensors have been elucidated. Further, futuristic sensing applications along with challenges will be deliberated herein.

Lipid membrane anchoring and highly specific fluorescence detection of cancer-derived exosomes based on postfunctionalized zirconium-metal-organic frameworks

Cancer-derived exosomes carry a variety of important biomarkers specific to the formation, invasion and metastasis of tumor tissue. Dynamic monitoring of exosomes originated from cancer cells has clinical significance. Here we proposed a novel method to employ zirconium-metal-organic frameworks (Zr-MOFs) for extracting and identifying exosomes from blood. At first UiO-66 was magnetically modified as the adsorbent to anchor exosomes by forming Zr-O-P bonds. Then UiO-66-NH₂ modified with anti-EpCAM was used to construct the fluorescent probe to recognize the extracted EpCAM-positive exosomes by forming a "MOF-exosome-MOF" structure. The proposed fluorescence detection method was evaluated by quantifying MCF-7 cell-derived exosomes at the concentration as low as 16.72 particles/μl. This method was successfully applied to analyze exosomes in the plasma samples from healthy donors and breast cancer patients, demonstrating that our method might have a great potential in assisting the early diagnosis and in dynamically monitoring the efficacy of cancer treatment. We believe that the method could be extended to the detection of other biomarkers in exosomes derived from cancer cell.

Sensitive electrochemiluminescence biosensing of polynucleotide kinase using the versatility of two-dimensional Ti3C2TX MXene nanomaterials

Electrochemiluminescence (ECL) is a powerful readout method for the development of (bio)sensors, whose performances depend on the electrode materials and the architecture of its surface. Herein, we demonstrate that the precise control of the sensing interface using the versatility of two-dimensional (2D) transition metal carbides (Ti₃C₂T_X MXene) leads to the enhancement of the ECL signal. This electrode material, which exhibits remarkable structural and electrochemical properties was decorated by the in situ formation of gold nanoparticles (AuNPs) owing to the Ti reducibility. Then, a large amount of the luminophore, Ru(bpy)₃²⁺, was immobilized on Ti₃C₂T_X MXene thanks to its unique negative charge and large specific surface area to obtain Ru-Ti₃C₂T_X-AuNPs. The presented approach exploits the high catalytic activity and excellent conductivity of this 2D nanomaterial as illustrated by the enhanced ECL emission performance of the Ru-Ti₃C₂T_X-AuNPs nanoprobes. Finally, DNA phosphorylated with polynucleotide kinase (PNK) was recognized efficiently by the chelation between Ti and phosphate group. A highly sensitive and selective ECL biosensor was developed for the detection of PNK and the screening of its inhibitors. A lower detection limit of 0.0002 U mL^-1 and wide linear relationship ranged from 0.002 to 10 U mL^-1 were obtained. Furthermore, the practicality of our method was tested in MCF-7 cell lysate, which opens enticing perspectives for future applications of Ti₃C₂T_X materials in the ECL bioanalysis field.

A dual-modal aptasensor based on a multifunctional acridone derivate for exosomes detection

Exosomes are promising biomarkers for cancer screening, but the development of a robust approach that can sensitively and accurately detect exosomes remains challenging. In the present study, an aptasensor based on the multifunctional signal probe 10-benzyl-2-amino-acridone (BAA) was developed for the colorimetric and photoelectrochemical detection and quantitation of exosomes. Exosomes are captured by cholesterol DNA anchor-modified magnetic beads (MBs) through hydrophobic interactions. This capture process can be monitored under a confocal fluorescence microscope using BAA as the fluorescent signal probe. The aptamer modified copper oxide nanoparticles (CuO NPs) then bind to mucin 1 (MUC1) on the surface of the exosomes to form a sandwich structure (MBs-Exo-CuO NPs). Finally, the MBs-Exo-CuO NPs are dissolved in nitric acid to generate Cu²⁺, which inhibits the visible-light-induced oxidase mimic activity and photoelectrochemical activity of BAA simultaneously. The changes in absorbance and photocurrent intensities are directly proportional to the concentration of exosomes. In this dual-modal aptasensor, the colorimetric assay can achieve rapid screening and identification, which is especially useful for point-of-care testing. The UV-vis absorbance and photocurrent assays then provide quantitative information, with a limit of detection of 1.09 × 10³ particles μL^-1 and 1.38 × 10³ particles μL^-1, respectively. The proposed aptasensor thus performs dual-modal detection and quantitation of exosomes. This aptasensor provides a much-needed toolset for exploring the biological roles of exosomes in specific diseases, particularly in the clinical setting.

2D metal carbides and nitrides (MXenes) for sensors and biosensors

MXenes are layered two-dimensional (2D) materials discovered in 2011 (Ti₃C₂X) and are otherwise called 2D transition metal carbides, carbonitrides, and nitrides. These 2D layered materials have been in the limelight for a decade due to their interesting properties such as large surface area, high ion transport, biocompatibility, and low diffusion barrier. Therefore, MXenes are widely preferred by researchers for applications in electronics, sensing, biosensing, electrocatalysis, super-capacitors and fuel cells. There are a number of methods available for the bulk synthesis of MXene-based nanomaterials. In addition, the possibility of structural modification as required and its outstanding surface chemistry offer a fascinating interface for the development of novel biosensors. In this review, we specifically discuss important MXene synthesis routes. Moreover, critical parameters such as surface functionalization that can dictate the mechanical, electronic, magnetic, and optical properties of MXenes are also discussed. Following this, methods available for the surface functionalization and modification strategies of MXenes are also discussed. Furthermore, the emergence of gas, electrochemical, and optical biosensors based on MXenes since its first report is discussed in detail. Finally, future directions of MXenes biosensors for critical applications are discussed.

A test strip electrochemical disposable by 3D MXA/AuNPs DNA-circuit for the detection of miRNAs

The simple and reliable detection of microRNAs is of great significance for studying the biological functions, molecular diagnosis, disease treatment and targeted drug therapy of microRNA. In this study, we introduced a novel Ti₃C₂Tx (MXene) aerogels (denoted as MXA) composite gold nano-particles (AuNPs)-modified disposable carbon fiber paper (CFP) electrode for the label-free and sensitive detection of miRNA-155. Firstly, in the presence of MXene, graphene oxide (GO) and ethylenediamine (EDA), the 3D MXene hydrogel was formed by self-assembly method, and then adding the freeze-dried 3D MXA dropwise to CFP. Subsequently, electrodepositing AuNPs on the CFP/MXA was done to construct a 3D disposable DNA-circuit test strip with excellent interface. Under the optimum experimental conditions, the detection limit of 3D disposable DNA circuit strip for miRNA-155 was 136 aM (S/N = 3). The CFP/MXA/AuNPs (CMA) electrode also has a wide dynamic range (20 fM to 0.4 μM), with a span of 4 orders of magnitude. Notably, we also tested the practicality of the sensor in 8 clinical samples. The technological innovations in the detection and quantification of microRNA in this work may be helpful to the study new aspects of microRNA biology and the development of diagnosis.

MXene-based cytosensor for the detection of HER2-positive cancer cells using CoFe2O4@Ag magnetic nanohybrids conjugated to the HB5 aptamer

MXenes are a new class of conductive two-dimensional material which have received growing attention in biosensing for their significant surface area and unique surface chemistry. Here, gold electrodes were modified with MXene nanosheets of about 2 nm thickness and 1.5 μm lateral size for the electrochemical detection of tumor cells. An HB5 aptamer with high selectivity for HER-2 positive cells was immobilized on the MXene layers via electrostatic interactions. To minimize electrode biofouling with blood matrix, magnetic separation of HER-2 positive circulating tumor cells was carried out using CoFe₂O₄@Ag magnetic nanohybrids bonded to the HB5. The formation of sandwich-like structures between the magnetically captured cells and the functionalized MXene electrodes effectively shields the electron transfer of a redox probe, enabling quantitative cell detection using the change in current. This label-free MXene-based cytosensor platform yielded a wide linear range of 10²-10⁶ cells/mL, low detection limit of 47 cells/mL, and good sensitivity and selectivity in the detection of HER2-posetive cells in blood samples. The presented aptacytosensor demonstrates the great potential of using CoFe₂O₄@Ag magnetic nanohybrids and MXenes to monitor cancer progression via circulating tumor cells in blood at low cost.

MXenes in photomedicine: Advances and prospects

MXenes and their related nanocomposites with superior physicochemical properties such as high surface area, ease of synthesis and functionalization, high drug loading capacity, collective therapy potentials, pH-triggered drug release behavior,...

Blood compatibility evaluations of two-dimensional Ti3C2Txnanosheets

Two-dimensional (2D) nanomaterial Ti3C2Tx is a novel biomaterial used for medical apparatus. For its application, biosafety serves as a prerequisite for their use in vivo. So far, no research has systematically reported how Ti3C2Tx interacts with various components in the blood. In this work, we evaluated the hemocompatibility of Ti3C2Tx nanosheets which we prepared by HF etching. Effects of the concentration and size of Ti3C2Tx on the morphology and hemolysis rate of human red blood cells (RBCs), the structure and conformation of plasma proteins, the complement activation, as well as in vitro blood coagulation were studied. In general, Ti3C2Tx takes on good blood compatibility, but in the case of high concentration (>30 μg/mL) and "Small size" (about 100 nm), it led to the rupture of RBCs membrane and a higher rate of hemolysis. Meanwhile, platelets and complement were inclined to be activated with the increased concentration, accompanying the changed configuration of plasma proteins dependent on concentration. Surprisingly, the presence of Ti3C2Tx did not significantly disrupt the coagulation. In vitro cell culture, the results prove that when the Ti3C2Tx concentration is as high as 60μg/mL and still has good biological safety. By establishing a fuzzy mathematical model, it was proved that the hemocompatibility of Ti3C2Tx is more concentration-dependent than size-dependent, and the hemolysis rate is the most sensitive to the size and concentration of the Ti3C2Tx. These findings provide insight into the potential use of Ti3C2Tx as biofriendly nanocontainers for biomaterials in vivo.

Exosomes as Powerful Engines in Cancer: Isolation, Characterization and Detection Techniques

Exosomes, powerful extracellular nanovesicles released from almost all types of living cells, are considered the communication engines (messengers) that control and reprogram physiological pathways inside target cells within a community or between different communities. The cell-like structure of these extracellular vesicles provides a protective environment for their proteins and DNA/RNA cargos, which serve as biomarkers for many malicious diseases, including infectious diseases and cancers. Cancer-derived exosomes control cancer metastasis, prognosis, and development. In addition to the unique structure of exosomes, their nanometer size and tendency of interacting with cells makes them a viable novel drug delivery solution. In recent years, numerous research efforts have been made to quantify and characterize disease-derived exosomes for diagnosis, monitoring, and therapeutic purposes. This review aims to (1) relate exosome biomarkers to their origins, (2) focus on current isolation and detection methods, (3) discuss and evaluate the proposed technologies deriving from exosome research for cancer treatment, and (4) form a conclusion about the prospects of the current exosome research.

In situ growth of TiO2 nanowires on Ti3C2 MXenes nanosheets as highly sensitive luminol electrochemiluminescent nanoplatform for glucose detection in fruits, sweat and serum samples

A sensitive electrogenerated chemiluminescence (ECL) biosensor for glucose was developed based on in situ growth of TiO₂ nanowires on Ti₃C₂ MXenes (TiO₂-Ti₃C₂) as the nanoplatform. Via tuning the alkaline oxidation time, different amount of TiO₂ nanowires can be found on MXenes. An ECL biosensor for glucose was constructed by covalent immobilization of glucose oxidase (GODx) on the glycine functional TiO₂-Ti₃C₂ surface, with the ECL signal depending on the in-situ formation of H₂O₂ via the specifically catalysis of glucose by GODx, resulting in the apparent increase of ECL signal. The TiO₂-Ti₃C₂ can also act as the catalyst for the oxidation of H₂O₂ into O₂ to enhance the ECL of luminol. Based on this strategy, a highly sensitive ECL biosensor for glucose was obtained in wide concentration range of 20 nM-12 mM with a low detection limit of 1.2 nM (S/N = 3). The synergistic effects of large surface area, excellent conductivity, and high catalytic activity of the TiO₂-Ti₃C₂ make the sensor highly sensitive toward glucose; the specific enzyme catalysis reaction promises excellent selectivity of the ECL sensor. The proposed biosensor has been employed to detect glucose in human serum, fruits, and sweat samples with excellent performance, providing a universal approach for glucose in various samples, which shows great prospect in clinical diagnostics and wearable sensors.

2D Materials-Based Aptamer Biosensors: Present Status and Way Forward

Current advances in constructing functional nanomaterials and elegantly designed nanostructures have opened up new possibilities for the fabrication of viable field biosensors. Two-dimensional materials (2DMs) have fascinated much attention due to their chemical, optical, physicochemical, and electronic properties. They are ultrathin nanomaterials with unique properties such as high surface-to-volume ratio, surface charge, shape, high anisotropy, and adjustable chemical functionality. 2DMs such as graphene-based 2D materials, Silicate clays, layered double hydroxides (LDHs), MXenes, transition metal dichalcogenides (TMDs), and transition metal oxides (TMOs) offer intensified physicochemical and biological functionality and have proven to be very promising candidates for biological applications and technologies. 2DMs have a multivalent structure that can easily bind to single-stranded DNA/RNA (aptamers) through covalent, non-covalent, hydrogen bond, and π-stacking interactions, whereas aptamers have a small size, excellent chemical stability, and low immunogenicity with high affinity and specificity. This review discussed the potential of various 2D material-based aptasensor for diagnostic applications, e.g., protein detection, environmental monitoring, pathogens detection, etc.

A pretreatment-free electrical capacitance biosensor for exosome detection in undiluted serum

The exosome is considered a useful biomarker for the early diagnosis of cancer. However, pretreatment of samples used in diagnosis is time-consuming. Herein, we fabricated a capacitance-based electrical biosensor that requires no pretreatment of the sample; it is composed of a DNA aptamer/molybdenum disulfide (MoS₂) heterolayer on an interdigitated micro-gap electrode (IDMGE)/printed circuit board (PCB) system for detecting exosomes in an undiluted serum sample. The DNA aptamer detects the CD63 protein on the exosome as the biomarker, while the MoS₂ nanoparticle enhances electrical sensitivity. In this study, for the first time, the IDMGE system was used to amplify the electrical signal efficiently for exosome detection. The IDMGE amplifies the capacitance signal as the gap between electrodes decreases, making it easy to detect the target by utilizing the heightened sensitivity. Moreover, it is possible to immobilize a bio-probe more efficiently than with an electrical sensitivity-enhancing electrode with the same area. The thiol-modified (SH-) CD63 DNA aptamer was introduced as the bio-probe that selectively binds to the CD63 protein on the exosome surface. The capacitance signal from the IDMGE electrical sensor increased linearly with the increase in the concentration of exosomes in human serum expressed on a logarithmic scale, the detection limit being 2192.6 exosomes/mL. The proposed biosensor can detect exosomes in undiluted human serum with high selectivity and sensitivity. A blind test was also carried out to test the reliability of the biosensor. The capacitance-based electrical biosensor thus offers a new platform for cancer diagnosis in the future.

Electrochemical and optical biosensors based on multifunctional MXene nanoplatforms: Progress and prospects

Two-dimensional (2D) transition metal carbides, carbonitrides, and nitrides (MXene) have emerged as a rising family of atomic layered nanomaterials which undergoes intensive investigations in interdisciplinary applications. The large surface-to-volume ratio, excellent mechanical strength, desirable biocompatibility, along with tunable electronic and optical properties, render 2D MXenes exceptional attractive as versatile nanoplatforms for biosensing. Herein, advanced progress and novel paradigms of MXene-based biosensors are reviewed, focusing on the combination of MXenes with various detection techniques that promotes target recognition and signal transducing. Regarding the nature of transducing signals, MXene-based biosensors are categorized into two groups where MXenes serve as electrical platforms or optical platforms, respectively. The merits of MXenes are critically compared with other 2D materials to illustrate the distinctive advantages of MXenes in biosensing, while challenges such as environmental vulnerability was discussed to guide the sensor design. Facing with the rapid development of wearable electronics and internet of medical things, as well as escalating demanding in precision medicine, perspectives are provided to elucidate the potential of MXenes in propelling advances in these trending biomedical applications.

Tango of dual nanoparticles: Interplays between exosomes and nanomedicine

Exosomes are lipid bilayer vesicles released from cells as a mechanism of intracellular communication. Containing information molecules of their parental cells and inclining to fuse with targeted cells, exosomes are valuable in disease diagnosis and drug delivery. The realization of their clinic applications still faces difficulties, such as lacking technologies for fast purification and functional reading. The advancement of nanotechnology in recent decades makes it promising to overcome these difficulties. In this article, we summarized recent progress in utilizing the physiochemical properties of nanoparticles (NPs) to enhance exosome purification and detection sensitivity or to derive novel technologies. We also discussed the valuable applications of exosomes in NPs‐based drug delivery. Till now most studies in these fields are still at the laboratory research stage. Translation of these bench works into clinic applications still has a long way to go.

Progress in Nanomaterials-Based Optical and Electrochemical Methods for the Assays of Exosomes

Exosomes with diameters of 30-150 nm are small membrane-bound vesicles secreted by a variety of cells. They play an important role in many biological processes, such as tumor-related immune response and intercellular signal transduction. Exosomes have been considered as emerging and noninvasive biomarkers for cancer diagnosis. Recently, a large number of optical and electrochemical biosensors have been proposed for sensitive detection of exosomes. To meet the increasing demands for ultrasensitive detection, nanomaterials have been integrated with various techniques as powerful components. Because of their intrinsic merits of biological compatibility, excellent physicochemical features and unique catalytic ability, nanomaterials have significantly improved the analytical performances of exosome biosensors. In this review, we summarized the recent progress in nanomaterials-based biosensors for the detection of cancer-derived exosomes, including fluorescence, colorimetry, surface plasmon resonance spectroscopy, surface enhanced Raman scattering spectroscopy, electrochemistry, electrochemiluminescence and so on.

Sensing with MXenes: Progress and Prospects

Various fields of study consider MXene a revolutionary 2D material. Particularly in the field of sensors, the metal-like high electrical conductivity and large surface area of MXenes are desirable characteristics as an alternative sensor material that can transcend the boundaries of existing sensor technology. This critical review provides a comprehensive overview of recent advances in MXene-based sensor technology and a roadmap for commercializing MXene-based sensors. The existing sensors are systematically categorized as chemical, biological, and physical sensors. Each category is then classified into various subcategories depending on the electrical, electrochemical, structural, or optical sensing mechanism, which are the four fundamental working mechanisms of sensors. Representative structural and electrical approaches for boosting the performance of each category are presented. Finally, factors that hinder commercializing MXene-based sensors are discussed, and several breakthroughs in realizing commercially available MXene-based sensors are suggested. This review provides broad insights pertaining to previous and existing MXene-based sensor technology and perspectives on the future generation of low-cost, high-performance, and multimodal sensors for soft-electronics applications.

Advanced Nanotechnologies for Extracellular Vesicle-Based Liquid Biopsy

Extracellular vesicles (EVs) are emerging as a new source of biomarkers in liquid biopsy because of their wide presence in most body fluids and their ability to load cargoes from disease-related cells. Owing to the crucial role of EVs in disease diagnosis and treatment, significant efforts have been made to isolate, detect, and analyze EVs with high efficiency. A recent overview of advanced EV detection nanotechnologies is discussed here. First, several key challenges in EV-based liquid biopsies are introduced. Then, the related pivotal advances in nanotechnologies for EV isolation based on physical features, chemical affinity, and the combination of nanostructures and chemical affinity are summarized. Next, a summary of high-sensitivity sensors for EV detection and advanced approaches for single EV detection are provided. Later, EV analysis is introduced in practical clinical scenarios, and the application of machine learning in this field is highlighted. Finally, future opportunities for the development of next-generation nanotechnologies for EV detection are presented.

Anchoring luminol based on Ti3C2-mediated in situ formation of Au NPs for construction of an efficient probe for miRNA electrogenerated chemiluminescence detection

An efficient electrogenerated chemiluminescence (ECL) nanoprobe (luminol-Au NPs-Ti₃C₂) was constructed based on Ti₃C₂Tx MXene (Ti₃C₂)-mediated in situ formation of Au NPs and anchoring luminol to fabricate a sensitive ECL biosensor for miRNA-155 detection. Herein, Ti₃C₂ with rich Ti vacancy defects was used as reducing agent, and Au NPs were generated in situ and anchored on the Ti₃C₂ (Au NPs-Ti₃C₂). Moreover, the Au NPs-Ti₃C₂ composites were used as a carrier and provided a large number of sites for the efficient linking of luminol through Au-N bonds to form stable luminol-Au NPs-Ti₃C₂. The immobilization of ECL emitters is a versatile strategy which not only shortens the electron transmission distance between luminol and electrode, but also provides naked catalytic predominated (111) facets of Au NPs with high electrocatalytic activity, significantly improving the ECL signal of luminol. Furthermore, a catalytic hairpin assembly (CHA) reaction was used, resulting in further amplification of the signal. As a result, the as-prepared ECL biosensor exhibited a linear range from 0.3 fM to 1 nM with a detection limit of 0.15 fM, and demonstrated high reliability of miRNA-155 detection even in human serum samples. The construction of a multifunctional ECL probe with excellent ECL emission opens a new chapter for the application of Ti₃C₂ in the field of bioanalysis. Herein, Au NPs were generated in situ and anchored on the Ti₃C₂ (Au NPs-Ti₃C₂). Moreover, the Au NPs-Ti₃C₂ was used as a carrier and linked luminol through Au-N bonds to form a stable luminol-Au NPs-Ti₃C₂ nanoprobe. The strategy displayed versatility which not only shortened the electron transmission distance between luminol and the electrode, but also provided a catalytic surface with high electrocatalytic activity of Au NPs that significantly improved the ECL signal of luminol.

Ultrasensitive dual-quenching electrochemiluminescence immunosensor for prostate specific antigen detection based on graphitic carbon nitride quantum dots as an emitter

Early monitoring of prostate-specific antigen (PSA) is crucial in diagnosis and proactive treatment of prostate disease. Herein, a dual-quenching ternary ECL immunosensor was designed for PSA detection based on graphitic carbon nitride quantum dots (g-CNQDs, as an emitter), potassium persulfate (K2S2O8, as a coreactant), and silver nanoparticles doped multilayer Ti3C2 MXene hybrids (Ag@TCM, as a coreaction accelerator). First, Ag@TCM was immobilized on the surface of a glassy carbon electrode, then g-CNQDs was further adsorbed on Ag@TCM to acquire a higher initial ECL signal at a potential window from - 1.3 to 0.0 V (vs. Ag/AgCl). Ag@TCM not only acted as the coreaction accelerator, but also as a matrix to load enormous g-CNQDs and prostate-specific capture antibody via Ag-N bond. Meanwhile, prostate-specific detection antibody was marked by gold nanoparticles modified manganese dioxide as a dual-quenching probe (Ab2- Au@MnO2). When Ab2-Au@MnO2 was introduced into the ternary ECL system via sandwiched immuno-reaction, the high-sensitive detection of PSA was achieved by the dual-quenching effect, caused by the resonant energy transfer from g-CNQDs (energy donor) to Au@MnO2 (energy acceptor). As a result, this ECL immunosensor showed a good dynamic concentration range from 10 fg·mL-1 to 100 ng·mL-1 with a detection limit of 6.9 fg·mL-1 for PSA detection. The dual-quenching ECL strategy presented high stability and good specificity to open up a new pathway for ultrasensitive immunoassay.

Recent Progress in Detection and Profiling of Cancer Cell-Derived Exosomes

Exosomes, known as nanometer-sized vesicles (30-200 nm), are secreted by many types of cells. Cancer-derived exosomes have great potential to be biomarkers for early clinical diagnosis and evaluation of cancer therapeutic efficacy. Conventional detection methods are limited to low sensitivity and reproducibility. There are hundreds of papers published with different detection methods in recent years to address these challenges. Therefore, in this review, pioneering researches about various detection strategies are comprehensively summarized and the analytical performance of these tests is evaluated. Furthermore, the exosome molecular composition (protein and nucleic acid) profiling, a single exosome profiling, and their application in clinical cancer diagnosis are reviewed. Finally, the principles and applications of machine learning method in exosomes researches are presented.

Machine Learning-Reinforced Noninvasive Biosensors for Healthcare

The emergence and development of noninvasive biosensors largely facilitate the collection of physiological signals and the processing of health-related data. The utilization of appropriate machine learning algorithms improves the accuracy and efficiency of biosensors. Machine learning-reinforced biosensors are started to use in clinical practice, health monitoring, and food safety, bringing a digital revolution in healthcare. Herein, the recent advances in machine learning-reinforced noninvasive biosensors applied in healthcare are summarized. First, different types of noninvasive biosensors and physiological signals collected are categorized and summarized. Then machine learning algorithms adopted in subsequent data processing are introduced and their practical applications in biosensors are reviewed. Finally, the challenges faced by machine learning-reinforced biosensors are raised, including data privacy and adaptive learning capability, and their prospects in real-time monitoring, out-of-clinic diagnosis, and onsite food safety detection are proposed.

Fascinating MXene nanomaterials: emerging opportunities in the biomedical field

In recent years, there has been rapid progress in MXene research due to its distinctive two-dimensional structure and outstanding properties. Especially in biomedical applications, MXenes have attracted widespread favor with numerous studies on biosafety, bioimaging, therapy, and biosensing, although their development is still in the experimental stage. A comprehensive understanding of the current status of MXenes in biomedicine will promote their use in clinical applications. Here, we review advances in MXene research. First, we introduce the methods of synthesis, surface modification and functionalization of MXenes. Then, we summarize the biosafety and biocompatibility, paving the way for specific biomedical applications. On this basis, MXene nanostructures are described with respect to their use in antibacterial, bioimaging, cancer therapy, tissue regeneration and biosensor applications. Finally, we discuss MXene as a promising candidate material for further applications in biomedicine.

An Electrochemical Ti3C2Tx Aptasensor for Sensitive and Label-Free Detection of Marine Biological Toxins

Saxitoxin (STX) belongs to the family of marine biological toxins, which are major contaminants in seafood. The reference methods for STX detection are mouse bioassay and chromatographic analysis, which are time-consuming, high costs, and requirement of sophisticated operation. Therefore, the development of alternative methods for STX analysis is urgent. Electrochemical analysis is a fast, low-cost, and sensitive method for biomolecules analysis. Thus, in this study, an electrolyte-insulator-semiconductor (EIS) sensor based on aptamer-modified two-dimensional layered Ti3C2Tx nanosheets was developed for STX detection. The high surface area and rich functional groups of MXene benefited the modification of aptamer, which had specific interactions with STX. Capacitance-voltage (C-V) and constant-capacitance (ConCap) measurement results indicated that the aptasensor was able to detect STX with high sensitivity and good specificity. The detection range was 1.0 nM to 200 nM and detection limit was as low as 0.03 nM. Moreover, the aptasensor was found to have a good selectivity and two-week stability. The mussel tissue extraction test suggested the potential application of this biosensor in detecting STX in real samples. This method provides a convenient approach for low-cost, rapid, and label-free detection of marine biological toxins.

MXene and black phosphorus based 2D nanomaterials in bioimaging and biosensing: progress and perspectives

Bioimaging and biosensing have garnered interest in early cancer diagnosis due to the ability of gaining in-depth insights into cellular functions and providing a wide range of diagnostic parameters. Emerging 2D materials of multielement MXenes and monoelement black phosphorous nanosheets (BPNSs) with unique intrinsic physicochemical properties such as a tunable bandgap and layer-dependent fluorescence, high carrier mobility and transport anisotropy, efficient fluorescence quenching capability, desirable light absorption and thermoelastic properties, and excellent biocompatibility and biosafety properties provide promising nano-platforms for bioimaging and biosensing applications. In view of the growing attention on the rising stars of the post-graphene age in the progress of bioimaging and biosensing, and their common feature characteristics as well as complementarity for constructing complexes, the main objective of this review is to reveal the recent advances in the design of MXene or BPNS based nanoplatforms in the field of bioimaging and biosensing. The preparation and surface functionalization methods, biosafety, and other important aspects of bioimaging and biosensing applications of MXenes and BPNSs have been assessed systematically, along with highlighting the main challenges in further biomedical application. The review not only focuses on the advancements in 2D materials for use in bioimaging and biosensing but also assesses the possibility of their future potential in bioapplications.

Label-Free, Fast Response, and Simply Operated Silver Ion Detection with a Ti3C2Tx MXene Field-Effect Transistor

Silver (Ag) is a widely used heavy metal, and its oxidation state (Ag⁺) causes serious harm to organisms after bioaccumulation and biomagnification, posing urgent demand for the rapid, efficient, and simply operated Ag⁺ detection techniques. In this work, a fast, portable, and label-free Ag⁺ detection sensor based on a Ti₃C₂T_x MXene field-effect transistor (FET) is reported. The Ti₃C₂T_x MXene works as the sensing element in the FET sensor, which shows excellent sensing performance, i.e., fast response (few seconds) and good sensitivity and selectivity to Ag⁺ without any detection label or probe. Utilizing the visual photograph, transmission electron microscopy image, and Ag elemental mapping analysis, the sensing mechanism of the label-free Ti₃C₂T_x MXene FET sensor is demonstrated to be the in situ reduction of Ag⁺ and the formation of Ag nanoparticles (AgNPs). Moreover, Ag⁺ detection in real samples shows that the proposed FET devices have satisfactory sensing capability for Ag⁺ in tap water and river water. This study puts forward a novel FET strategy for Ag⁺ detection in aqueous systems, which is of essential and inspiring meaning for motivating the potential applications of MXene-based sensor devices in analytical applications and the realization of on-site environmental monitoring.

The role of exosomes in liquid biopsy for cancer diagnosis and prognosis prediction

Liquid biopsy is a revolutionary strategy in cancer diagnosis and prognosis prediction, which is used to analyze cancer cells or cancer-derived products through biofluids such as blood, urine and so on. Exosomes play a crucial role in mediating cell communication. A growing number of studies have reported that exosomes are involved in tumorigenesis, tumor growth, metastasis and drug resistance by delivering cargos including nucleic acids and protein. Thus, exosomes, as a new type of liquid biopsy, have the potential to be diagnostic or prognostic biomarkers. Herein, we elaborate on the current methods and introduce novel techniques for exosome isolation and characterization. Moreover, we elucidate the advantages of exosomes compared to other biological components in liquid biopsy and summarize the different exosomal biomarkers in cancer diagnosis and prognosis prediction.

Dual signal amplification based on polysaccharide-initiated ring-opening polymerization and click polymerization for exosomes detection

Exosomes, as a biomarker with enhancing tumor invasion and spread, play an essential role for lung cancer diagnosis, therapy, and prognosis. In this work, a novel electrochemical sensor was fabricated for detecting exosomes secreted by lung cancer cells based on polysaccharide-initiated ring-opening polymerization (ROP) and click polymerization. First, MPA formed a self-assembled monolayer on the gold electrode surface, and then anti-EGFR was immobilized on the electrode surface by amide bond. Subsequently, a lot of phosphate groups were introduced by the specific recognition between anti-EGFR and exosomes, then sodium alginate grafted Glycidyl propargyl ether (SA-g-GPE) prepared via ROP was attached to the exosomes through PO₄^3-Zr⁴⁺-COOH coordination bond. After that, click polymerization was initiated by alkyne groups on the SA-g-GPE polymerization chain to realize highly sensitive detection of A549 exosomes. Under the optimum conditions, the fabricated sensor showed a good linear relationship between the logarithm of exosomes concentration and peak current in the range of 5 × 10³ - 5 × 10⁹ particles/mL, and the limit of detection (LOD) was as low as 1.49 × 10² particles/mL. In addition, this method had the advantages of high specificity, anti-interference, high sensitivity, simplicity, rapidity and green economy, which proposed a novel avenue for the detection of exosomes, and also had potential applications in early cancer diagnosis and biomedicine.