Preparation and characterization of crosslinked chitosan/gelatin scaffolds by ice segregation induced self-assembly

PEG grafted chitosan scaffold for dual growth factor delivery for enhanced wound healing

Application of growth factors at wound site has improved the efficiency and quality of healing. Basic fibroblast growth factor (bFGF) and vascular endothelial growth factor (VEGF) induce proliferation of various cells in wound healing. Delivery of growth factor from controlled release systems protect it from degradation and also result in sustained delivery of it at the site of injury. The goal of the study was to develop a Polyethylene glycol (PEG) cross-linked cotton-like chitosan scaffold (CS-PEG-H) by freeze-drying method and chemically conjugate heparin to the scaffold to which the growth factors can be electrostatically bound and evaluate its wound healing properties in vitro and in vivo. The growth factor containing scaffolds induced increased proliferation of HaCaT cells, increased neovascularization and collagen formation seen by H and E and Masson's trichrome staining. Immunohistochemistry was performed using the Ki67 marker which increased proliferation of cells in growth factor containing scaffold treated group. Frequent dressing changes are a major deterrent to proper wound healing. Our system was found to release both VEGF and bFGF in a continuous manner and attained stability after 7 days. Thus our system can maintain therapeutic levels of growth factor at the wound bed thereby avoiding the need for daily applications and frequent dressing changes. Thus, it can be a promising candidate for wound healing.

Comprehensive In Vitro Testing of Calcium Phosphate-Based Bioceramics with Orthopedic and Dentistry Applications

Recently, a large spectrum of biomaterials emerged, with emphasis on various pure, blended, or doped calcium phosphates (CaPs). Although basic cytocompatibility testing protocols are referred by International Organization for Standardization (ISO) 10993 (parts 1-22), rigorous in vitro testing using cutting-edge technologies should be carried out in order to fully understand the behavior of various biomaterials (whether in bulk or low-dimensional object form) and to better gauge their outcome when implanted. In this review, current molecular techniques are assessed for the in-depth characterization of angiogenic potential, osteogenic capability, and the modulation of oxidative stress and inflammation properties of CaPs and their cation- and/or anion-substituted derivatives. Using such techniques, mechanisms of action of these compounds can be deciphered, highlighting the signaling pathway activation, cross-talk, and modulation by microRNA expression, which in turn can safely pave the road toward a better filtering of the truly functional, application-ready innovative therapeutic bioceramic-based solutions.

Preparation, characterization and bioactivities of nano anhydrous calcium phosphate added gelatin-chitosan scaffolds for bone tissue engineering

Gelatin, chitosan and nano calcium phosphate based composite scaffold with tailored architectures and properties has great potential for bone regeneration. Herein, we aimed to improve the physico chemical, mechanical and osteogenic properties of 3D porous scaffold by incorporation of dihydrogen calcium phosphate anhydrous (DCPA) nanoparticles into biopolymer matrix with variation in composition in the prepared scaffolds. Scaffolds were prepared from the slurry containing gelatin, chitosan and synthesized nano DCPA particle using lyophilization technique. DCPA nano particles were synthesized using calcium carbonate and phosphoric acid in water-ethanol medium. XRD pattern showed phase pure DCPA in synthesized nanopowder. Scaffolds were prepared by addition of DCPA nanoparticles to the extent of 5-10 wt% of total polymer into gelatin-chitosan solution with solid loading varying between 2.5 and 2.75 wt%. The prepared scaffold showed interconnected porosity with pore size varying between 110 and 200 micrometer. With addition of DCPA nanoparticles, average pore size of the prepared scaffolds decreased. With increase in nano ceramic phase content from 5 wt% to 10 wt% of total polymer, the compressive strength of the scaffold increased. Scaffold containing 10 wt% DCPA showed the highest average compressive strength of 2.2 MPa. Higher cellular activities were observed in DCPA containing scaffolds as compared to pure gelatin chitosan scaffold suggesting the fact that nano DCPA addition into the scaffold promoted better osteoblast adhesion and proliferation as evident from MTT assay and scanning electron microscopic (SEM) investigation of osteoblast cultured scaffolds. A higher degree of lamellopodia and filopodia extensions and better spreading behavior of osteoblasts were observed in FESEM micrographs of MG 63 cultured DCPA containing scaffold. The results demonstrated that both mechanical strength and osteogenic properties of gelatin-chitosan scaffold could be improved by addition of anhydrous dihydrogen calcium phosphate nanoparticles into it.

Osteoblast studied on gelatin based biomaterials in rabbit Bone Bioengineering

The bone-derived-osteoblast seeded biomaterials scaffold in tissue engineering, have displayed prominence in the treatment of the osseous medical condition. In vitro osteogenesis of rabbit osteoblast cell (rOb) from bone tissue (rT) and MSC-derived rOb from bone marrow (rM) on Gelatin-Hydroxyapatite (HG) based biomaterials was investigated. In this work, lyophilized biomaterial was prepared by the addition of amorphous chitosan ('C') to 'H' dispersed in 'G' matrix, to find its role in biomaterials biocompatibility. Isolated rOb seeded biomaterials were studied using CLSM and flow cytometry for proliferation potential. The biomaterial's core and surface morphology was studied from SEM-EDX and AFM respectively. Upon co-culture with HCG, rT over rM showed rabbit bone extracellular matrix (ECM) mimicking properties both in in vitro studies and biomaterials micro architecture. The in vitro metabolic behaviour was studied by Alamar Blue (AB) assay, DNA content using Hoechst 33258, potency via the activity of Alkaline Phosphatase (ALP), Calcium's relative content by Alizarin Red S (ARS) assay. A novel combination of biomaterials-cell interaction was observed when rT was co-cultured with HCG and proved effective in osteogenesis with regard to Bone Bioengineering.

Optimization of dye adsorption capacity and mechanical strength of chitosan aerogels through crosslinking strategy and graphene oxide addition

Chitosan (CS) aerogels were prepared by freeze-drying as potential adsorbents for water purification, and the effect of the strategy of crosslinking was investigated by varying the amount of crosslinker (glutaraldehyde) and the sequence of steps for the preparation of the aerogel. Two procedures were compared, in which the crosslinking step was carried out before or after the freeze-drying of the starting CS solution. When crosslinking was postponed after the freeze-drying step, the adsorption capacity towards an anionic dye, such as indigo carmine, considerably increased (up to +45%), reaching values as high as 534.4 ± 30.5 mg g^-1. The same crosslinking strategy ensured a comparable improvement also in nanocomposite aerogels containing graphene oxide (GO), which was added to enhance the mechanical strength and provide adsorption capacity towards cationic dyes. Besides possessing good mechanical strength (compressive modulus higher than 1 MPa), the CS/GO aerogels were able to bind also cationic pollutants such as methylene blue. The maximum uptake capacity increased from 4.3 ± 1.6 to 168.6 ± 9.6 mg of cationic dye adsorbed per gram of adsorbent with respect to pristine CS aerogels.

Design, fabrication and characterization of pectin-coated gelatin nanoparticles as potential nano-carrier system

The main purpose of this study was to fabricate potential nano-delivery systems based on protein-polysaccharide complex for use in beverages. In this regard, optimum gelatin-pectin complex (GPC) nano-carrier with hydrodynamic diameter of ≈200 nm was designed and fabricated using low-bloom gelatin (BG) and high-methoxyl pectin (CP) at BG/CP weight ratio of 1:1 (0.025%(w/v) CP on 0.025%(w/v) BG) and pH 4.5. The suspension containing GPC nano-carrier had very good transparency (14.1NTU). Scanning electron microscopy (SEM) images illustrated that the GPC particles were spherical with fairly smooth surface. Particle size analysis showed that the complex particles had a narrow size distribution (polydispersity index (PDI)≈0.254). Fourier transform infrared (FTIR) confirmed the formation of amide bonds between carboxyl groups in CP and amino groups in BG, and differential scanning calorimetry (DSC) analysis showed the amorphous nature of the GPC nano-carrier. Finally, the storage stability test indicated that the GPC particles didn't significantly grow after 20 days of storage at 4°C. PRACTICAL APPLICATION: The encapsulation of bioactive compounds have different benefits, for example, protection from several damaging environmental factors such as light, oxygen, moisture, heat, mechanical stresses, or other destructive agents, controlling the release of bioactives within foods during storage and also in human gastrointestinal tract, increase in solubility in aqueous foods and covering unfavorable flavor and odor of bioactive ingredients. So that, development of this technic can develops new functional, healthy foods, and foods with new tastes.

Hemostasis and anti-necrotic activity of wound-healing dressing containing chitosan nanoparticles

Necrotic tissues are the dead tissues present in the wounded areas, which need to be removed for rapid wound healing. Various biopolymer-based dressings have been exploited to heal infected wounds, but with limited success. In a quest to develop an effective and economic wound dressing, a biodegradable dressing containing chitosan nanoparticles has been successfully developed. Chitosan nanoparticles were prepared by ionic gelation method and then assembled into the porous chitosan dressing, by lyophilization. The resulting dressing was analyzed for morphology, porosity, pore volume, surface area and biodegradability. Higher surface area and porosity of the dressing facilitated its partial biodegradation by enzymatic action. In vitro cellular investigations with Human Dermal Fibroblasts (HDF) confirmed the safety of the dressing for wound healing applications. Human Thrombin-Antithrombin (TAT) based in vitro ELISA assay, for evaluating the hemostasis activity, illustrated an accelerated hemostasis activity, through higher thrombin generation and stable blood clot formation. The blood in contact with the dressing contained two-fold higher levels of TAT, as compared to that in contact with the TAT standard. Our results suggest the potential of the developed dressing for removing the necrotic tissues and accelerating the hemostasis activity, for efficient and rapid wound healing.

Polymeric 3D scaffolds for tissue regeneration: Evaluation of biopolymer nanocomposite reinforced with cellulose nanofibrils

Biopolymers such as gelatin (Gel) and cellulose nanofibrils (CNF) have many of the essential requirements for being used as scaffolding materials in tissue regeneration; biocompatibility, surface chemistry, ability to generate homogeneous hydrogels and 3D structures with suitable pore size and interconnection, which allows cell colonization and proliferation. The purpose of this study was to investigate whether the mechanical behaviour of the Gel matrix can be improved by means of functionalization with cellulose nanofibrils and proper cross-linking treatments. Blending processes were developed to achieve a polymer nanocomposite incorporating the best features of both biopolymers: biomimicry of the Gel and structural reinforcement by the CNF. The designed 3D structures underline interconnected porosity achieved by freeze-drying process, improved mechanical properties and chemical stability that are tailored by CNF addition and different cross-linking approaches. In vitro evaluations reveal the preservation of the biocompatibility of Gel and its good interaction with cells by promoting cell colonization and proliferation. The results support the addition of cellulose nanofibrils to improve the mechanical behaviour of 3D porous structures suitable as scaffolding for tissue regeneration.

Alginate-gelatin formulation to modify lovastatin release profile from red yeast rice for hypercholesterolemia therapy

AIM

The preparation of a delivery system able to guarantee a delayed release of lovastatin from red yeast rice (RYR) is mandatory to counteract cholesterol biosynthesis effectively.

MATERIALS & METHODS

Polymeric formulations were prepared mixing alginate and gelatin, in different ratios, with RYR. The effect of different composition on stiffness, viscosity, swelling behavior and mesostructure of matrices was analyzed.

RESULTS

Formulations obtained combining polymers in comparable amount (i.e., 60/40 and 50/50) guaranteed a delayed release of lovastatin from RYR, a prolonged inhibitory activity toward 3-hydroxy-3-methylglutaryl-coenzyme A reductase and a decreased cholesterol synthesis.

CONCLUSION

The formulation obtained combining 60% gelatin and 40% of alginate showed physicochemical properties suitable to lead a lovastatin release profile compatible with cholesterol biosynthesis.

High strength gelatin-based nanocomposites reinforced by surface-deacetylated chitin nanofiber networks

In this study, chitin nanofiber (ChNF) was deacetylated on the crystalline surface by NaOH treatment, leading to the fibrillation of mostly individualized nanofibers with high aspect ratio. The small diameter and high strength of chitin nanofibers make them promising reinforcing fillers for composites. Herein by introducing into the gelatin, surface-deacetylated chitin nanofiber (S-ChNF)/gelatin nanocomposites were fabricated in different component ratios using immersion method followed with drying. Due to the reinforcing effect attributed to S-ChNF, mechanical properties of the S-ChNF/gelatin were significantly improved in both stress and Young's modulus while still maintaining high transparency regardless of nanofiber content. Morphology and Fourier-transform infrared characterization revealed that S-ChNF preserved nanonetwork structures in the gelatin matrix and exhibited good compatibility through hydrogen bonding, which further confirmed the improvement in mechanical properties. Therefore, these S-ChNF/gelatin nanocomposites based on biocompatible and biodegradable raw materials have potential applications in biomedical and food packaging industries.

Strengthening injectable thermo-sensitive NIPAAm-g-chitosan hydrogels using chemical cross-linking of disulfide bonds as scaffolds for tissue engineering

In the present study, we fabricated non-toxic, injectable, and thermo-sensitive NIPAAm-g-chitosan (NC) hydrogels with thiol modification for introduction of disulfide cross-linking strategy. Previously, NIPAAm and chitosan copolymer has been proven to have excellent biocompatibility, biodegradability and rapid phase transition after injection, suitable to serve as cell carriers or implanted scaffolds. However, weak mechanical properties significantly limit their potential for biomedical fields. In order to overcome this issue, we incorporated thiol side chains into chitosan by covalently conjugating N-acetyl-cysteine (NAC) with carbodiimide chemistry to strengthen mechanical properties. After oxidation of thiols into disulfide bonds, modified NC hydrogels did improve the compressive modulus over 9 folds (11.4 kPa). Oscillatory frequency sweep showed a positive correlation between storage modulus and cross-liking density as well. Additionally, there was no cytotoxicity observed to mesenchymal stem cells, fibroblasts and osteoblasts. We suggested that the thiol-modified thermo-sensitive polysaccharide hydrogels are promising to be a cell-laden biomaterial for tissue regeneration.

Cryostructuring of polymer systems. 47. Preparation of wide porous gelatin-based cryostructurates in sterilizing organic media and assessment of the suitability of thus formed matrices as spongy scaffolds for 3D cell culturing

New gelatin-based cryostructurates have been elaborated and tested as scaffolds for three-dimensional (3D) cell culturing. Scaffold preparation included dissolution of Type A gelatin in dimethylsulfoxide, freezing of such solution, cryoextraction of crystalline phase with cold ethanol, cross-linking of gelatin with carbodiimide in ethanol medium, treatment of the matrix with ethanolic solution of Tris and tanning of the matrix with formaldehyde dissolved in ethanol. The use of organic media during all the preparation stages ensured the sterility of the scaffolds. The matrices thus prepared were seeded with human adipose tissue multipotent mesenchymal stromal cells to confirm the biocompatibility of scaffolds and their possibility to provide necessary environment for the cell growth and differentiation. The cells attached onto the surface of the pore walls, proliferated and differentiated into osteogenic and adipogenic lineages. These results demonstrate that gelatin-based cryostructurates prepared in the sterility ensuring organic media can be used as scaffolds for tissue engineering purposes.

Development of various composition multicomponent chitosan/fish collagen/glycerin 3D porous scaffolds: Effect on morphology, mechanical strength, biostability and cytocompatibility

The various composition multicomponent chitosan/fish collagen/glycerin 3D porous scaffolds were developed and investigated the effect of various composition chitosan/fish collagen/glycerin on scaffolds morphology, mechanical strength, biostability and cytocompatibility. The scaffolds were fabricated via freeze-drying technique. The effects of various compositions consisting in 3D scaffolds were investigated via FT-IR analysis, porosity, swelling and mechanical tests, and effect on the morphology of scaffolds investigated microscopically. The biostability and cytocompatibility tests were used to explore the ability of scaffolds to use for tissue engineering application. The average pore sizes of scaffolds were in range of 100.73±27.62-116.01±52.06, porosity 71.72±3.46-91.17±2.42%, tensile modulus in dry environment 1.47±0.08-0.17±0.03MPa, tensile modulus in wet environment 0.32±0.03-0.14±0.04MPa and biodegradation rate (at day 30) 60.38±0.70-83.48±0.28%. In vitro culture of human fibroblasts and keratinocytes showed that the various composition multicomponent 3D scaffolds were good cytocompatibility however, the scaffolds contained high amount of fish collagen excellently facilitated cell proliferation and adhesion. It was found that the high amount fish collagen and glycerin scaffolds have high porosity, enough mechanical strength and biostability, and excellent cytocompatibility.

Selective removal of carious lesion with Er:YAG laser followed by dentin biomodification with chitosan

The aim of this study was to evaluate the effect of Er:YAG laser for selective removal of carious lesion, followed by biomodification with chitosan gel where the subsurface microhardness, chemical composition, and morphological changes of the residual caries-affected dentin were examined. Artificial dentinal lesions were created by pH-cycling method (14 days) in 104 bovine specimens (5 × 5 mm). Specimens were randomly divided according to the carious removal method: bur (low-speed handpiece) or Er:YAG laser (250 mJ/4 Hz). Specimens were treated with 35% phosphoric acid and were subdivided into two groups according to dentin biomodification: without chitosan (control) and 2.5% chitosan. Forty specimens were restored with an adhesive system and composite resin. Subsurface microhardness tests were performed in sound dentin, caries-affected dentin, residual caries-affected dentin, and after the restoration. The other 64 specimens were subjected to SEM-EDS atomic analysis. Data were statistically analyzed (p < 0.05). After the Er:YAG laser excavation, the microhardness value of residual caries-affected dentin was higher (p < 0.05) than bur-treated dentin. A significant decrease in the amount of Ca, P, and Ca/P ratio was found after the removal of carious lesions with Er:YAG laser (p < 0.05). The biomodification with chitosan did not influence the microhardness and atomic percentage of Ca, P, and Ca/P ratio of residual caries-affected dentin (p > 0.05). SEM analysis showed morphological changes on residual caries-affected dentin (p > 0.05). The selective removal of carious dentin with Er:YAG laser increased microhardness of residual caries-affected dentin, changing its surface morphology and chemical composition. The biomodification with chitosan did not influence the structural and chemical composition of residual caries-affected dentin.

Induced migration of endothelial cells into 3D scaffolds by chemoattractants secreted by pro-inflammatory macrophages in situ

Cell migration in scaffolds plays a crucial role in tissue regeneration, which can better mimic cell behaviors in vivo. In this study, a novel model has been proposed on controlling 3D cell migration in porous collagen-chitosan scaffolds with various pore structures under the stimulation of inflammatory cells to mimic the angiogenesis process. Endothelial cells (ECs) cultured atop the scaffolds in the Transwell molds which were placed into a well of a 24-well culture plate were promoted to migrate into the scaffolds by chemoattractants such as vascular endothelial growth factor (VEGF) and tumor necrosis factor-alpha (TNF-α) secreted by the pro-inflammatory macrophages incubated in the well culture plate. The phenotype of macrophages was mediated by 50 ng/ml interferon-gamma (IFN-γ) and different concentrations of lipopolysaccharide (LPS, 150-300 ng/ml). The cell migration depth had a positive correlation with LPS concentration, and thereby the TNF-α concentration. The ECs migrated easier to a deeper zone of the scaffolds prepared at - 10ºC (187 μm in pore diameter) than that at - 20ºC (108 μm in pore diameter) as well. The method provides a useful strategy to study the 3D cell migration, and is helpful to reveal the vascularization process during wound healing in the long run.

Biodegradable microrobots for targeting cell delivery

These days, cell delivery is considered a potential method for treatment of many genetic diseases or tissue regeneration applications. In conventional cell delivery methods, cells are encapsulated in or cultured on biocompatible polymers. However, the main problem with these carriers is their lack of targeting ability. For tissue regeneration or many cell treatments, it is needed to deliver cells to a specific site of action. Magnetic microrobots based on industrial photoresists have been studied in literature for magnetically controllable carriers. However, there are some issues about biodegradation and removal of these microrobots from the body. In this paper, we hypothesis fabrication of new generation of biodegradable magnetic microrobots based on additive manufacturing methods to overcome this problem and to bring this evolving field to a new level.

Scaffolds containing chitosan, gelatin and graphene oxide for bone tissue regeneration in vitro and in vivo

Critical-sized bone defects are augmented with cell free and cell loaded constructs to bridge bone defects. Improving the properties of three-dimensional scaffolds with multiple polymers and others is of growing interest in recent decades. Chitosan (CS), a natural biopolymer has limitations for its use in bone regeneration, and its properties can be enhanced with other materials. In the present study, the composite scaffolds containing CS, gelatin (Gn) and graphene oxide (GO) were fabricated through freeze-drying. These scaffolds (GO/CS/Gn) were characterized by the SEM, Raman spectra, FT-IR, EDS, swelling, biodegradation, protein adsorption and biomineralization studies. The inclusion of GO in the CS/Gn scaffolds showed better physico-chemical properties. The GO/CS/Gn scaffolds were cyto-friendly to rat osteoprogenitor cells, and they promoted differentiation of mouse mesenchymal stem cells into osteoblasts. The scaffolds also accelerated bridging of the rat tibial bone defect with increased collagen deposition in vivo. Hence, these results strongly suggested the potential nature of GO/CS/Gn scaffolds for their application in bone tissue regeneration.

Controlled local drug delivery strategies from chitosan hydrogels for wound healing

INTRODUCTION

The main target of tissue engineering is the preparation and application of adequate materials for the design and production of scaffolds, that possess properties promoting cell adhesion, proliferation and differentiation. The use of natural polysaccharides, such as chitosan, to prepare hydrogels for wound healing and controlled drug delivery is a research topic of wide and increasing interest. Areas covered: This review presents the latest results and challenges in the preparation of chitosan and chitosan-based scaffold/hydrogel for wound healing applications. A detailed overview of their behavior in terms of controlled drug delivery, divided by drug categories, and efficacy was provided and critically discussed. Expert opinion: The need to establish and exploit the advantages of natural biomaterials in combination with active compounds is playing a pivotal role in the regenerative medicine fields. The challenges posed by the many variables affecting tissue repair and regeneration need to be standardized and adhere to recognized guidelines to improve the quality of evidence in the wound healing process. Currently, different methodologies are followed to prepare innovative scaffold formulations and structures. Innovative technologies such as 3D printing or bio-electrospray are promising to create chitosan-based scaffolds with finely controlled structures with customizable shape porosity and thickness. Chitosan scaffolds could be designed in combination with a variety of polysaccharides or active compounds with selected and reproducible spacial distribution, providing active wound dressing with highly tunable controlled drug delivery.

Enzymatically crosslinked gelatin hydrogel promotes the proliferation of adipose tissue-derived stromal cells

Gelatin hydrogel crosslinked by microbial transglutaminase (mTG) exhibits excellent performance in cell adhesion, proliferation, and differentiation. We examined the gelation time and gel strength of gelatin/mTG hydrogels in various proportions to investigate their physical properties and tested their degradation performances in vitro. Cell morphology and viability of adipose tissue-derived stromal cells (ADSCs) cultured on the 2D gel surface or in 3D hydrogel encapsulation were evaluated by immunofluorescence staining. Cell proliferation was tested via Alamar Blue assay. To investigate the hydrogel effect on cell differentiation, the cardiac-specific gene expression levelsof Nkx2.5, Myh6, Gja1, and Mef2c in encapsulated ADSCs with or without cardiac induction medium were detected by real-time RT-PCR. Cell release from the encapsulated status and cell migration in a 3D hydrogel model were assessed in vitro. Results show that the gelatin/mTG hydrogels are not cytotoxic and that their mechanical properties are adjustable. Hydrogel degradation is related to gel concentration and the resident cells. Cell growth morphology and proliferative capability in both 2D and 3D cultures were mainly affected by gel concentration. PCR result shows that hydrogel modulus together with induction medium affects the cardiac differentiation of ADSCs. The cell migration experiment and subcutaneous implantation show that the hydrogels are suitable for cell delivery.

Fabrication and characterization of soft macroporous Jeffamine cryogels as potential materials for tissue applications

Macroporous three-dimensional (3D) scaffolds have been proven to function as structural substrates and as apertures for cell growth and proliferation thereby ensuring tissue regeneration.