Efficient activation of peroxymonosulfate by hollow cobalt hydroxide for degradation of ibuprofen and theoretical study

Pre-accumulation and in-situ destruction of diclofenac by a photo-regenerable activated carbon fiber supported titanate nanotubes composite material: Intermediates, DFT calculation, and ecotoxicity

Pharmaceuticals and personal care products (PPCPs) have been widely detected in ecosystems. However, effective water purification technologies for PPCPs degradation are lacking. In this work, an active activated carbon fiber supported titanate nanotubes (TNTs@ACF) composite was synthesized via one-step hydrothermal process, which was applied for adsorption and photocatalytic degradation of PPCPs under simulated solar light. Characterizations indicated that the successful grafting of TNTs onto ACF was achieved and surface modification occurred. Diclofenac (DCF, a model PPCPs) was rapidly adsorbed onto TNTs@ACF, and subsequently photodegraded (98.8 %) under solar light within 2 h. TNTs@ACF also performed well over a wide range of pH, and was resistant to humic acid. The good adsorption and photocatalytic activity of TNTs@ACF was attributed to the well-defined hybrid structure, enabling corporative adsorption of DCF by TNTs and ACF, and extending the light absorbance to visible region. Furthermore, the description of degradation pathway and evaluation of ecotoxicity for DCF and its intermediates/byproduct were proposed based on experimental analysis, density functional theory (DFT) calculation and quantitative structure-activity relationship (QSAR) analysis, respectively, indicating the photocatalytic degradation of DCF can offer the step-by-step de-toxicity. Our study is expected to offer new strategy as "pre-accumulation and in-situ destruction" for environmental application.

Efficient activation of peroxymonosulfate by composites containing iron mining waste and graphitic carbon nitride for the degradation of acetaminophen

In this work, the potential to use an iron mining waste (IW), rich in α-Fe₂O₃ and α-FeOOH, for the development of composites based on graphitic carbon nitride (CN) is demonstrated. These materials were synthesized through a simple thermal treatment at 550 °C of a mixture containing melamine and different IW mass percentages, giving rise to the catalysts xIWCN (where x is related to the initial mass percentage of IW). The iron phases of the precursor were partially transformed throughout the formation of the composites, in such a way that a mixture of α-Fe₂O₃ and γ-Fe₂O₃ was observed in their final composition. Furthermore, structural defects were produced in the carbonaceous matrix of the materials, causing the fragmentation of g-C₃N₄ and an increase of surface area. The catalytic activities of these composites were evaluated in reactions of peroxymonosulfate activation for the degradation of paracetamol. Among these materials, the composite 20IWCN showed the best catalytic activity, being able to degrade almost 90 % of the total paracetamol in only 20 min of reaction. This catalyst also demonstrated high chemical stability, being successfully utilized in five consecutive reaction cycles, with negligible iron leaching.

Efficient degradation of industrial pollutants with sulfur (IV) mediated by LiCoO2 cathode powders of spent lithium ion batteries: A "treating waste with waste" strategy

Strategies to maximize the reuse of electronic and industrial wastes have scientific, economic, social and environmental implications. We herein propose a strategy of "treating waste with waste" using LiCoO₂ cathode powders from spent lithium ion batteries to eliminate industrial pollutants led by sulfur (S) (IV) in waste water. By radical scavenging experiments and electron spin resonance (ESR) analysis, we identified singlet ¹O₂ as the dominant species while SO₄^- and OH as the secondary species for decontamination during the oxidization process mediated by LiCoO₂ powders. The intrinsic mechanism of S(IV) conversion was revealed to be two-step hydrogen migrations from HSO₃^- to O₂ occurring on LiCoO₂ surface by density functional theory (DFT) calculations. The surface of LiCoO₂ powders plays a key role in anchoring sulfur species and forming surface complex as an excellent medium, which is found to be stable and reusable by material characterizations and the recycling experiment. Free Co(II) ions in solvents have no catalysis effect on the conversion of pollutants. Our work offers a particularly vivid example for rational reuse of electronic wastes to eliminate industrial pollutants, and may raise economic benefits in environmental practice due to two aims achieved in once action.

Optimization and characterization of zeolite-titanate for ibuprofen elimination by sonication/hydrogen peroxide/ultraviolet activity

In this study, a photo-catalyst of titanium oxide was coated on zeolite by the sol-gel method. The generation of the zeolite-titanate photo-catalyst was optimized at conditions of calcination temperature (300, 350, 400 and 500 °C), calcination time (1, 2, 3, and 4 h), and titanate content (0, 2, 4, 6, and 8 mL). The catalyst was used for 'Sonication/UV/H₂O₂″ activity and finally, eliminating ibuprofen. Physicochemical properties of the as-built photo-catalysts for all optimized conditions were determined using FESEM-EDX-mapping, BET, FTIR, and XRD. The highest percentage of ibuprofen removal (98.9%) was obtained at conditions of zeolite to titanium ratio of 1 g: 2 mL, time in the furnace of 1 h, and temperature of the furnace of 350 °C. The optimum photo-catalytic (namely, Cat-350-1-2) had a surface area value of 39 m²/g and a crystalline size of 4.9 nm. The surface area for all photo-catalysts increased after being used for ibuprofen removal, possibly due to ultrasonic waves. The presence of Ti-O, benzene ring, O-Al-O, O-Si-O, C-H, and O-H in the photo-catalysts structure were confirmed. Growing the calcination time resulted in an increase in the crystallinity of titanium dioxide in the photo-catalysts and, ultimately a reduction in the ibuprofen removal. The consumed energy by the developed system was calculated for the presence (0.094 kJ/g) and absence (17.5 kJ/g) of the ultrasonic wave. The degradation pathway and reaction kinetic are also explored and proposed. The results showed that the ultrasonic-UV-activated H₂O₂-based technique can be applied as an alternative method for ibuprofen removal from aqueous media.

Removal of 17β-Estradiol by Activated Charcoal Supported Titanate Nanotubes (TNTs@AC) through Initial Adsorption and Subsequent Photo-Degradation: Intermediates, DFT calculation, and Mechanisms

A low-cost composite of activated charcoal supported titanate nanotubes (TNTs@AC) was developed via the facile hydrothermal method to remove the 17β-estradiol (E2, a model of pharmaceutical and personal care products) in water matrix by initial adsorption and subsequent photo-degradation. Characterizations indicated that the modification occurred, i.e., the titanate nanotubes would be grafted onto the activated charcoal (AC) surface, and the micro-carbon could modify the tubular structure of TNTs. E2 was rapidly adsorbed onto TNTs@AC, and the uptake reached 1.87 mg/g from the dual-mode model fitting. Subsequently, the adsorbed E2 could be degraded 99.8% within 2 h under ultraviolet (UV) light irradiation. TNTs@AC was attributed with a unique hybrid structure, providing the hydrophobic effect, π−π interaction, and capillary condensation for E2 adsorption, and facilitating the electron transfer and then enhancing photocatalytic ability for E2-degradation. In addition, the removal mechanism of E2 was elucidated through the density functional theory calculation. Our study is expected to provide a promising material for environmental application.

The application of microwaves in sulfate radical-based advanced oxidation processes for environmental remediation: A review

The generation of sulfate radicals is a key factor to limit the catalytic activities of sulfate radical-based advanced oxidation processes (SR-AOPs). Microwave irradiation is a specific method to heat solutions via thermal and nonthermal effects, and has attracted an increasing amount of attention in recent years. Herein, we focus on the application of microwaves in SR-AOPs that called SR-MAOPs in environmental remediation, including wastewater, landfill leachate, biological waste sludge and soil, etc. treatment. Various systems including homogeneous and heterogeneous SR-MAOPs were reviewed. In wastewater treatment, not only the dyes and pharmaceutical and personal care products (PPCPs) were considered, the application in actual water matrices was also summarized. In addition, the function of remediation for organic-contaminated soil, landfill leachate and biological waste sludge were assessed using SR-MAOPs. In addition to evaluating the degradation efficiency of various organic pollutants from environment, the dewaterability is another key to treat biological waste sludge. The SR-MAOPs could break up hydrogen bonds and inactivate and denature complex biological molecules via microwave effects to achieve the dewatering of microorganisms in sludge. Furthermore, the COD of the sludge increased to a high level after microwave irradiation of sludge, which means that biopolymers released from microbial cells into the solution. Then, the released COD could be well treated by the SR-MAOPs. Based on the summary, we reveal that SR-MAOPs are potential technologies for environmental remediation, especially for systems with complicated organic compounds.

Activation of Peracetic Acid with Lanthanum Cobaltite Perovskite for Sulfamethoxazole Degradation under a Neutral pH: The Contribution of Organic Radicals

Advanced oxidation processes (AOPs) are effective ways to degrade refractory organic contaminants, relying on the generation of inorganic radicals (e.g., ^•OH and SO₄^•-). Herein, a novel AOP with organic radicals (R-O^•) was reported to degrade contaminants. Lanthanum cobaltite perovskite (LaCoO₃) was used to activate peracetic acid (PAA) for organic radical generation to degrade sulfamethoxazole (SMX). The results show that LaCoO₃ exhibited an excellent performance on PAA activation and SMX degradation at neutral pH, with low cobalt leaching. Meanwhile, LaCoO₃ also showed an excellent reusability during PAA activation. In-depth investigation confirmed CH₃C(O)O^• and CH₃C(O)OO^• as the key reactive species for SMX degradation in LaCoO₃/PAA system. The presence of Cl^- (1-100 mM) slightly inhibited the degradation of SMX in the LaCoO₃/PAA system, whereas the addition of HCO₃^- (0.1-1 mM) and humic aid (1-10 mg/L) could significantly inhibit SMX degradation. This work highlights the generation of organic radicals via the heterogeneous activation of PAA and thus provides a promising way to destruct contaminants in wastewater treatment.