Copper(II), zinc(II) and nickel(II) complexes as nuclease mimetics

Mechanistic Studies of Homo- and Heterodinuclear Zinc Phosphoesterase Mimics: What Has Been Learned?

Phosphoesterases hydrolyze the phosphorus oxygen bond of phosphomono-, di- or triesters and are involved in various important biological processes. Carboxylate and/or hydroxido-bridged dizinc(II) sites are a widespread structural motif in this enzyme class. Much effort has been invested to unravel the mechanistic features that provide the enormous rate accelerations observed for enzymatic phosphate ester hydrolysis and much has been learned by using simple low-molecular-weight model systems for the biological dizinc(II) sites. This review summarizes the knowledge and mechanistic understanding of phosphoesterases that has been gained from biomimetic dizinc(II) complexes, showing the power as well as the limitations of model studies.

Naphthoylhydrazones: coordination to metal ions and biological screening

V^IVO, Cu^II and Zn^II complexes from three new naphthoylhydrazones were screened towards their ability to bind albumin and their cytotoxicity.

A phosphate-targeted dinuclear Cu(II) complex combining major groove binding and oxidative DNA cleavage

Free radical generation is an inevitable consequence of aerobic existence and is implicated in a wide variety of pathological conditions including cancer, cardiovascular disease, ageing and neurodegenerative disorder. Free radicals can, however, be used to our advantage since their production is catalysed by synthetic inorganic molecules-termed artificial metallonucleases-that cut DNA strands by oxidative cleavage reactions. Here, we report the rational design and DNA binding interactions of a novel di-Cu2+ artificial metallonuclease [Cu2(tetra-(2-pyridyl)-NMe-naphthalene)Cl4] (Cu2TPNap). Cu2TPNap is a high-affinity binder of duplex DNA with an apparent binding constant (Kapp) of 107 M(bp)-1. The agent binds non-intercalatively in the major groove causing condensation and G-C specific destabilization. Artificial metallonuclease activity occurs in the absence of exogenous reductant, is dependent on superoxide and hydrogen peroxide, and gives rise to single strand DNA breaks. Pre-associative molecular docking studies with the 8-mer d(GGGGCCCC)2, a model for poly[d(G-C)2], identified selective major groove incorporation of the complex with ancillary Cu2+-phosphate backbone binding. Molecular mechanics methods then showed the d(GGGGCCCC)2 adduct to relax about the complex and this interaction is supported by UV melting experiments where poly[d(G-C)2] is selectively destabilized.

The 3rd degree of biomimetism: associating the cavity effect, ZnII coordination and internal base assistance for guest binding and activation

The synthesis and characterization of a resorcinarene-based tetra(imidazole) ligand is reported. The properties of the corresponding ZnII complex are studied in depth, notably by NMR spectroscopy. In MeCN, acid-base titration reveals that one out of the four imidazole arms is hemi-labile and can be selectively protonated, thereby opening a coordination site in the exo position. Quite remarkably, the 4th imidazole arm promotes binding of an acidic molecule (a carboxylic acid, a β-diketone or acetamide), by acting as an internal base, which allows guest binding as an anion to the metal center in the endo position. Most importantly, the presence of this labile imidazole arm makes the ZnII complex active for the catalyzed hydration of acetonitrile. It is proposed that it acts as a general base for activating a water molecule in the vicinity of the metal center during its nucleophilic attack to the endo-bound MeCN substrate. This system presents a unique degree of biomimetism when considering zinc enzymes: a pocket for guest binding, a similar first coordination sphere, a coordination site available for water activation in the cis position relative to the substrate and finally an internal imidazole residue that plays the role of a general base.

Nuclease Activity of Diaza-Crown Ether Complexes of Cerium(III) with Different Functional Groups as Side Arms

Cerium(III) complexes of two ligands of a diaza-crown ether with different functional groups as side arms were synthesised and characterised. The catalytic ability of the cerium(III) complexes for pUC19 DNA cleavage was investigated and compared using agarose gel electrophoresis. The results indicate that the catalytic activity of the complex CeL2 [L2 = 2,2′- (1,4,10,13-tetraoxa-7,16-diazacyclooctadecane-7,16-diyl) diacetamide] with two carbamoylmethyl groups is significantly higher than the complex CeL1 [L1 = 2,2′- (1,4,10,13-tetraoxa-7,16-diazacyclooctadecane-7,16-diyl) diethanol] with two hydroxyethyl groups under the same conditions. The optimum catalytic concentrations of CeL1 and CeL2 were 7.69 × 10−5 and 3.08 × 10−5 mol L−1 respectively and excessively high concentrations of the complexes can reduce their catalytic efficiency due to the formation of inactive μ-hydroxo dimers. The optimum catalytic acidities of CeL1 and CeL2 were pH 7.0 and 7.5 respectively and excessively high pH of the reaction system can reduce the catalytic efficiency of the complexes due to the formation of cerium(III) hydroxide. DNA cleavage promoted by the two complexes takes place via the same hydrolytic pathway and so the activity difference of the two complexes is attributed to the stability of the complexes, rather than the catalytic mechanism.

Phosphodiester models for cleavage of nucleic acids

Nucleic acids that store and transfer biological information are polymeric diesters of phosphoric acid. Cleavage of the phosphodiester linkages by protein enzymes, nucleases, is one of the underlying biological processes. The remarkable catalytic efficiency of nucleases, together with the ability of ribonucleic acids to serve sometimes as nucleases, has made the cleavage of phosphodiesters a subject of intensive mechanistic studies. In addition to studies of nucleases by pH-rate dependency, X-ray crystallography, amino acid/nucleotide substitution and computational approaches, experimental and theoretical studies with small molecular model compounds still play a role. With small molecules, the importance of various elementary processes, such as proton transfer and metal ion binding, for stabilization of transition states may be elucidated and systematic variation of the basicity of the entering or departing nucleophile enables determination of the position of the transition state on the reaction coordinate. Such data is important on analyzing enzyme mechanisms based on synergistic participation of several catalytic entities. Many nucleases are metalloenzymes and small molecular models offer an excellent tool to construct models for their catalytic centers. The present review tends to be an up to date summary of what has been achieved by mechanistic studies with small molecular phosphodiesters.

Dinuclear metal(ii)-acetato complexes based on bicompartmental 4-chlorophenolate: syntheses, structures, magnetic properties, DNA interactions and phosphodiester hydrolysis

A series of dinuclear metal(ii)-acetato complexes: [Ni2(μ-L(Cl)O)(μ2-OAc)2](PF6)·3H2O (1), [Ni2(μ-L(Cl)O)(μ2-OAc)2](ClO4)·CH3COCH3 (2), [Cu2(μ-L(Cl)O)(μ2-OAc)(ClO4)](ClO4) (3), [Cu2(μ-L(Cl)O)(OAc)2](PF6)·H2O (4), [Zn2(μ-L(Cl)O)(μ2-OAc)2](PF6) (5) and [Mn2(L(Cl)-O)(μ2-OAc)2](ClO4)·H2O (6), where L(Cl)O(-) = 2,6-bis[bis(2-pyridylmethyl)aminomethyl]-4-chlorophenolate, were synthesized. The complexes were structurally characterized by spectroscopic techniques and single crystal X-ray crystallography. Six-coordinate geometries with doubly bridged acetato ligands were found in Ni(ii), Zn(ii) and Mn(ii) complexes 1, 2, 5 and 6, whereas with Cu(ii) complexes a five-coordinate species was obtained with 4, and mixed five- and six-coordinate geometries with a doubly bridged dimetal core were observed in 3. The magnetic properties of complexes 1-4 and 6 were studied at variable temperatures and revealed weak to very weak antiferromagnetic interactions in 1, 2, 4 and 6 (J = -0.55 to -9.4 cm(-1)) and ferromagnetic coupling in 3 (J = 15.4 cm(-1)). These results are consistent with DFT calculations performed at the B3LYP/def2-TZVP(-f) level of theory. Under physiological conditions, the interaction of the dinculear complexes 1-5 with supercoiled plasmid ds-DNA did not show any pronounced nuclease activity, but Ni(ii) complexes 1 and 2 revealed a strong ability to unwind the supercoiled conformation of ds-DNA. The mechanistic studies performed on the interaction of the Ni(ii) complexes with DNA demonstrated the important impact of the nickel(ii) ion in the unwinding process. In combination with the DNA study, the phosphatase activity of complexes 1, 3, and 5 was examined by the phosphodiester hydrolysis of bis(2,4-dinitrophenol)phosphate (BDNPP) in the pH range of 5.5-10.5 at 25 °C. The Michaelis-Menten kinetics performed at pH 7 and 10.7 showed that catalytic efficiencies kcat/KM (kcat = catalytic rate constant, KM = substrate binding constant) decrease in the order: Ni(ii), 1 > Zn(ii), 5 > Cu(ii), 3. A similar trend was also observed with the turnover numbers at pH = 7. The results are discussed in relation to the coordination geometry and nature of the metal center as well as the steric environment imposed by the compartmental phenoxido ligand.

Aquabis[3,6-bis(pyridin-2-yl)pyridazine-κ2N1,N6]copper(II) bis(trifluoromethanesulfonate)

The title salt, [Cu(C14H10N4)2(H2O)](CF3SO3)2, contains a Cu2+cation coordinated by two bidentate 3,6-bis(pyridin-2-yl)pyridazine ligands and one water molecule. The charge is balanced by two disordered trifluoromethanesulfonate anions. The asymmetric unit contains half of a cation (point group symmetry 2) and one anion. The coordinating water molecule is engaged in intermolecular O—H...O hydrogen bonds, which connect the cation to the anion. C—H...X(X= N, O, F) interactions stabilize the crystal structure.

Transition Metal Complexes of a Diaza-Crown Ether with two Carbamoylmethyl Substituents: Synthesis and Assessment as a Functional Nuclease

We report the synthesis, catalytic function and catalytic mechanism of two transition metal complexes (CuL, ZnL) of a diaza-crown ether with two acetylamino side arms [L = 2,2′-(1,4,10,13-tetraoxa-7,16-diazacyclooctadecane-7,16-diyl)diacetamide] in the hydrolysis of DNA. Their nuclease functions on pUC19 DNA cleavage were investigated. The results indicated that the active species might be formed by the deprotonation of the water-coordinated molecules in the complex and the optimum pH is 8.0 for both CuL and ZnL. The catalytic activity of CuL is higher than that of ZnL in DNA hydrolytic cleavage due to the difference in the Lewis acidity of the central metal ions, which is contrary to the result with the Cu and Zn complexes of the parent ligand L0 (1,4,10,13-tetraoxa-7,16-diazacyclooctadecane) as artificial nuclease. Comparison studies of DNA cleavage in the presence and absence of several oxygen scavengers showed that these complexes can promote DNA cleavage by a hydrolytic pathway. Our proposed mechanism suggests that the negative charge on the phosphorus oxygen atom of the substrate molecule is dispersed and the intermediate is formed and stabilised by hydrogen bonding between the DNA molecule and the acetylamino group of the complex.

Remarkable reactivity of alkoxide/acetato-bridged binuclear copper(II) complex as artificial carboxylesterase

Bromo-containing binuclear Schiff base copper(II) complex, Cu₂L(OAc), with an alkoxo/acetato-bridged moiety was employed as a model of carboxylesterases to promote the hydrolytic cleavage of p-nitrophenyl picolinate (PNPP). Furthermore, the reactivity of a mononuclear complex (CuHL) was evaluated for comparing it with that of binuclear one. The results reveal that the as-prepared binuclear Cu₂L(OAc) efficiently accelerated the hydrolysis of PNPP, giving rise to excess four orders of magnitude rate enhancement in contrast to the un-catalyzed reaction. Cu₂L(OAc) represented an enzyme-like bell-shaped pH-responsive kinetic behavior. Moreover, the binuclear one is more reactive than its mononuclear analogue (CuHL) by two orders of magnitude. The total efficiency of Cu₂L(OAc) is about 61-fold than that of its mononuclear analogue, CuHL. In addition, a contrast experiment reveals that binuclear Cu₂L(OAc) displayed good activity in the hydrolysis of PNPP as well another active ester, i.e., S-2-benzothiazolyl 2-amino-alpha-(methoxyimino)-4-thiazolethiolacetate (AE-active ester). Noteworthyly, it was found that mononuclear one inspired more obvious rate enhancement in the hydrolysis of AE-active ester relative to PNPP hydrolysis. The estimated pK _a1 of bound water on the binuclear Cu₂L(OAc) using second derivative method (SDM) is relatively smaller than that for CuHL by a gap of about 0.8 pK unit, which facilitates the hydrolysis of PNPP. Four orders of magnitude rate enhancement was observed for the catalytic hydrolysis of p-nitrophenyl picolinate (PNPP) by one μ-alkoxide/acetato-bridged binuclear copper(II) complex under physiological conditions. Substrate specificity of the resulting binuclear complexes was observed for the hydrolysis of PNPP and AE-active ester.

A phenoxo-bridged dicopper(ii) complex as a model for phosphatase activity: mechanistic insights from a combined experimental and computational study

A μ-phenoxo-bis(μ₂-1,3-acetato)-bridged dicopper(ii) complex [Cu(L¹)(μ-O₂CMe)₂][NO₃] (1) has been synthesized from the perspective of modeling phosphodiesterase activity. Structural characterization was done initially with 1·3Et₂O (vapour diffusion of Et₂O into MeOH solution of 1; poor crystal quality) and finally with its perchlorate salt [Cu(L¹)(μ-O₂CMe)₂][ClO₄]·1.375MeCN·0.25H₂O, crystallized from vapour diffusion of n-pentane into a MeCN-MeOH mixture (comparatively better crystal quality). An asymmetric unit of such a crystal contains two independent molecules of compositions [Cu(L¹)(μ-O₂CMe)₂][ClO₄] and [Cu(L¹)(μ-O₂CMe)₂(MeCN)][ClO₄] (coordinated MeCN with 0.75 occupancy), and two molecules of MeCN and H₂O (each H₂O molecule with 0.25 occupancy) as the solvent of crystallization. These two cations, each having five-coordinate (μ-phenoxo)bis(μ-acetato)-bridged Cu^II ions, differ by only the coordination environment of only one Cu^II ion, which has a weakly coordinated acetonitrile molecule in its sixth position. Temperature-dependent magnetic studies on 1 reveal that the copper(ii) centres are antiferromagnetically coupled with the exchange-coupling constant J = -124(1) cm^-1. Theoretically calculated J = -126.51 cm^-1, employing a broken-symmetry DFT approach, is in excellent agreement with the experimental value. The dicopper(ii) complex has been found to be catalytically efficient in the hydrolysis of 2-hydroxypropyl-p-nitrophenylphosphate (HPNP). Detailed kinetic experiments and solution studies (potentiometry, species distribution and ESI-MS) were performed to elucidate the reaction mechanism. DFT calculations were performed to discriminate between different possible mechanistic pathways. The free-energy barrier for HPNP hydrolysis catalyzed by 1 is comparable to that obtained from the experimentally-determined value. The involvement of non-covalent (hydrogen-bonding) interaction has also been probed by DFT calculations. The activity of 1 is found to be the highest, compared to the structurally-characterized Mn, Co, Ni and Zn complexes of L¹(-) reported earlier, under identical experimental conditions, in which each metal centre is six-coordinate.

Interaction of the Zn(ii)–cyclen complex with aminomethylphosphonic acid: original simultaneous potentiometric and 31P NMR data treatment

The interaction of aminomethylphosphonic acid with the Zn(ii)–cyclen complex was evaluated by an original combination of potentiometry and multinuclear NMR.

De novo design of a hydrolytic DNA cleavage agent, mono nitratobis(phen)cobalt(ii) aqua nitrate complex

Demonstration of DNA intercalation and hydrolytic cleavage by complex1.

Substitutional impact on biological activity of new water soluble Ni(II) complexes: Preparation, spectral characterization, X-ray crystallography, DNA/protein binding, antibacterial activity and in vitro cytotoxicity

A series of new water soluble nickel(II) complexes containing triphenylphosphine and 4-methoxysalicylaldehyde-4(N)-substituted thiosemicarbazones were synthesized and characterized. Crystallographic investigations confirmed the structure of the complexes (1-4) having the general structure [Ni(4-Msal-Rtsc)(PPh₃)] (Where R=H (1); CH₃ (2); C₂H₅ (3); C₆H₅ (4)) which showed that thiosemicarbazone ligands coordinated to nickel(II) ion as ONS tridentate bibasic donor. DNA/BSA protein binding ability of the ligands and their new complexes were studied by taking calf-thymus DNA (CT-DNA) and Bovine serum albumin (BSA) through absorption and emission titrations. Ethidium bromide (EB) displacement study showed the intercalative binding trend of the complexes to DNA. From the albumin binding studies, the mechanism of quenching was found as static and the alterations in the secondary structure of BSA by the compounds were confirmed with synchronous spectral studies. The binding affinity of the complexes to CT-DNA and BSA has the order of [Ni(4-Msal-etsc)(PPh₃)] (3) >[Ni(4-Msal-mtsc)(PPh₃)] (2) >[Ni(4-Msal-tsc)(PPh₃)] (1) >[Ni(4-Msal-ptsc)(PPh₃)] (4). In vitro cytotoxicity of the complexes was tested on human lung cancer cells (A549), human cervical cancer cells (HeLa), human liver carcinoma cells (Hep G2). All the complexes exhibited significant activity against three cancer cells. Among them, complex 4 exhibited almost 2.5 fold activity than cisplatin in A549 and HepG2 cell lines. In HeLa cell line, the complexes exhibited significant activity which is less than cisplatin. While comparing the activity of the complexes in A549 and HepG2 cell lines it falls in the order 4>1>2>3>cisplatin. The results obtained from DNA, protein binding and cytotoxicity studies, it is concluded that the cytotoxicity of the complexes as determined by MTT assay were not unduly influenced by the complexes having different binding efficiency with DNA and protein. The complexes exhibited good spectrum of antibacterial activity against four pathogenic bacteria such as E. faecalis (gram +ve), S. aureus (gram +ve), E. coli (gram -ve) and P. aeruginosa (gram -ve).

Catalytic Capacity of Diaza-Crown Ether Lanthanum Complexes with Varied Ligands for Phosphate Ester Hydrolysis in Different Media

Two diaza-crown ether compounds, 1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (L0) and its derivative with double acetamide side arms 2,2'-(1,4,10,13-teteaoxa-7,16-diazacyclooctadecane-7,16-diyl)diacetamide (L), and the corresponding two lanthanum complexes were synthesised and characterised. The catalytic capacity of the lanthanum complexes was investigated for the hydrolysis of bis(4-nitrophenyl) phosphate ester (BNPP) in aqueous solution and in CTAB micelles. Kinetic studies show that the catalytic efficiency of complex LaL is obviously higher than that of complex LaL0, and introducing acetamide into the ring of the diaza-crown ether can improve the catalytic ability of the complexes for BNPP hydrolysis. A rate enhancement of about two times was observed for the complex–micelle in contrast with the complex–water system for BNPP catalytic hydrolysis. The optimal pH for the catalytic reaction in the two kinds of media systems show an approximately 0.4 pH unit difference. The two complexes possess higher thermostability, and are more stable in the micelle than in aqueous solution. Based on the results and their analysis, a catalytic mechanism with cooperation of acetamide is proposed.

Comparison of catalytic activities of new La (III) and Ce (III) complexes with different diaza-crown ether ligands for DNA hydrolytic cleavage

A new diaza-crown ether with double hydroxypropyl branches (L = 1,1'-(1,4,10,13-tetraoxa-7,16-diazacyclooctadecane-7,16-diyl)dipropan-2-ol) and its two lanthanide complexes (LaL and CeL) were synthesised and characterised. Their nuclease activities on pUC19 DNA cleavage were investigated using agarose gel electrophoresis, and pseudo-first-order rate constants kobs of 0.067 h–1 for LaL, 0.041 h–1 for CeL, 0.013 h–1 for LaL0, and 0.027 h–1 CeL0 were obtained (L0 = 1,4,10,13-tetraoxa-7,16-diazacyclooctadecane). The results indicated that the CeL complex was more efficient than the LaL complex for DNA cleavage at low concentrations, but the LaL complex was more efficient than the CeL complex at high concentrations. Moreover, kinetic studies demonstrated that introducing hydroxypropyl side arms in the ring of the diaza-crown ether can improve the catalytic ability of the complexes in DNA cleavage, which may be due to the hydroxypropyl side arms enhancing the bonding interaction between the complex and the DNA molecule by hydrogen bonding. A hydrolytic mechanism for DNA cleavage was demonstrated by applying several oxygen scavengers to the DNA catalytic cleavage. A proposed mechanism for the DNA cleavage shows that the hydroxypropyl side groups can recognise and bind the phosphodiester bond of DNA by hydrogen bonding and electrostatic interaction.

Hydrolytic Metallo-Nanozymes: From Micelles and Vesicles to Gold Nanoparticles

Although the term nanozymes was coined by us in 2004 to highlight the enzyme-like properties of gold nanoparticles passivated with a monolayer of Zn(II)-complexes in the cleavage of phosphate diesters, systems resembling those metallo-nanoparticles, like micelles and vesicles, have been the subject of investigation since the mid-eighties of the last century. This paper reviews what has been done in the field and compares the different nanosystems highlighting the source of catalysis and frequent misconceptions found in the literature.

Tri- and tetra-substituted cyclen based lanthanide(III) ion complexes as ribonuclease mimics: a study into the effect of log Ka, hydration and hydrophobicity on phosphodiester hydrolysis of the RNA-model 2-hydroxypropyl-4-nitrophenyl phosphate (HPNP)

A series of tetra-substituted 'pseudo' dipeptide ligands of cyclen (1,4,7,10,-tetraazacyclododecane) and a tri-substituted 3'-pyridine ligand of cyclen, and the corresponding lanthanide(III) complexes were synthesised and characterised as metallo-ribonuclease mimics. All complexes were shown to promote hydrolysis of the phosphodiester bond of 2-hydroxypropyl-4-nitrophenyl phosphate (HPNP, τ1/2 = 5.87 × 10(3) h), a well known RNA mimic. The La(III) and Eu(III) tri-substituted 3'-pyridine lanthanide(III) complexes being the most efficient in promoting such hydrolysis at pH 7.4 and at 37 °C; with τ1/2 = 1.67 h for La(III) and 1.74 h for Eu(III). The series was developed to provide the opportunity to investigate the consequences of altering the lanthanide(III) ion, coordination ability and hydrophobicity of a metallo-cavity on the rate of hydrolysis using the model phosphodiester, HPNP, at 37 °C. To further provide information on the role that the log Ka of the metal bound water plays in phosphodiester hydrolysis the protonation constants and the metal ion stability constants of both a tri and tetra-substituted 3'pyridine complex were determined. Our results highlighted several key features for the design of lanthanide(III) ribonucelase mimics; the presence of two metal bound water molecules are vital for pH dependent rate constants for Eu(III) complexes, optimal pH activity approximating physiological pH (∼7.4) may be achieved if the log Ka values for both MLOH and ML(OH)2 species occur in this region, small changes to hydrophobicity within the metallo cavity influence the rate of hydrolysis greatly and an amide adjacent to the metal ion capable of forming hydrogen bonds with the substrate is required for achieving fast hydrolysis.

Progress of Mimetic Enzymes and Their Applications in Chemical Sensors

The need to develop innovative and reformative approaches to synthesize chemical sensors has increased in recent years because of demands for selectivity, stability, and reproducibility. Mimetic enzymes provide an efficient and convenient method for chemical sensors. This review summarizes the application of mimetic enzymes in chemical sensors. Mimetic enzymes can be classified into five categories: hydrolases, oxidoreductases, transferases, isomerases, and induced enzymes. Potential and recent applications of mimetic enzymes in chemical sensors are reviewed in detail, and the outlook of profound development has been illustrated.