Folding kinetics of the outer membrane proteins OmpA and FomA into phospholipid bilayers

Tryptophan-lipid interactions in membrane protein folding probed by ultraviolet resonance Raman and fluorescence spectroscopy

Aromatic amino acids of membrane proteins are enriched at the lipid-water interface. The role of tryptophan on the folding and stability of an integral membrane protein is investigated with ultraviolet resonance Raman and fluorescence spectroscopy. We investigate a model system, the β-barrel outer membrane protein A (OmpA), and focus on interfacial tryptophan residues oriented toward the lipid bilayer (trp-7, trp-170, or trp-15) or the interior of the β-barrel pore (trp-102). OmpA mutants with a single tryptophan residue at a nonnative position 170 (Trp-170) or a native position 7 (Trp-7) exhibit the greatest stability, with Gibbs free energies of unfolding in the absence of denaturant of 9.4 and 6.7 kcal/mol, respectively. These mutants are more stable than the tryptophan-free OmpA mutant, which exhibits a free energy of unfolding of 2.6 kcal/mol. Ultraviolet resonance Raman spectra of Trp-170 and Trp-7 reveal evolution of a hydrogen bond in a nonpolar environment during the folding reaction, evidenced by systematic shifts in hydrophobicity and hydrogen bond markers. These observations suggest that the hydrogen bond acceptor is the lipid acyl carbonyl group, and this interaction contributes significantly to membrane protein stabilization. Other spectral changes are observed for a tryptophan residue at position 15, and these modifications are attributed to development of a tryptophan-lipid cation-π interaction that is more stabilizing than an intraprotein hydrogen bond by ∼2 kcal/mol. As expected, there is no evidence for lipid-protein interactions for the tryptophan residue oriented toward the interior of the β-barrel pore. These results highlight the significance of lipid-protein interactions, and indicate that the bilayer provides more than a hydrophobic environment for membrane protein folding. Instead, a paradigm of lipid-assisted membrane protein folding and stabilization must be adopted.

Physical determinants of β-barrel membrane protein folding in lipid vesicles

The spontaneous folding of two Neisseria outer membrane proteins, opacity-associated (Opa)(60) and Opa(50) into lipid vesicles was investigated by systematically varying bulk and membrane properties. Centrifugal fractionation coupled with sodium dodecyl sulfate polyacrylamide gel electrophoresis mobility assays enabled the discrimination of aggregate, unfolded membrane-associated, and folded membrane-inserted protein states as well as the influence of pH, ionic strength, membrane surface potential, lipid saturation, and urea on each. Protein aggregation was reduced with increasing lipid chain length, basic pH, low salt, the incorporation of negatively charged guest lipids, or by the addition of urea to the folding reaction. Insertion from the membrane-associated form was improved in shorter chain lipids, with more basic pH and low ionic strength; it is hindered by unsaturated or ether-linked lipids. The isolation of the physical determinants of insertion suggests that the membrane surface and dipole potentials are driving forces for outer membrane protein insertion and folding into lipid bilayers.

Folding studies of purified LamB protein, the maltoporin from the Escherichia coli outer membrane: trimer dissociation can be separated from unfolding

The folding mechanisms for β-barrel membrane proteins present unique challenges because acquisition of both secondary and tertiary structure is coupled with insertion into the bilayer. For the porins in Escherichia coli outer membrane, the assembly pathway also includes association into homotrimers. We study the folding pathway for purified LamB protein in detergent and observe extreme hysteresis in unfolding and refolding, as indicated by the shift in intrinsic fluorescence. The strong hysteresis is not seen in unfolding and refolding a mutant LamB protein lacking the disulfide bond, as it unfolds at much lower denaturant concentrations than wild type LamB protein. The disulfide bond is proposed to stabilize the structure of LamB protein by clasping together the two sides of Loop 1 as it lines the inner cavity of the barrel. In addition we find that low pH promotes dissociation of the LamB trimer to folded monomers, which run at about one third the size of the native trimer during SDS PAGE and are much more resistant to trypsin than the unfolded protein. We postulate the loss at low pH of two salt bridges between Loop 2 of the neighboring subunit and the inner wall of the monomer barrel destabilizes the quaternary structure.

Deciphering the roles of outer membrane protein A extracellular loops in the pathogenesis of Escherichia coli K1 meningitis

Outer membrane protein A (OmpA) has been implicated as an important virulence factor in several gram-negative bacterial infections such as Escherichia coli K1, a leading cause of neonatal meningitis associated with significant mortality and morbidity. In this study, we generated E. coli K1 mutants that express OmpA in which three or four amino acids from various extracellular loops were changed to alanines, and we examined their ability to survive in several immune cells. We observed that loop regions 1 and 2 play an important role in the survival of E. coli K1 inside neutrophils and dendritic cells, and loop regions 1 and 3 are needed for survival in macrophages. Concomitantly, E. coli K1 mutants expressing loop 1 and 2 mutations were unable to cause meningitis in a newborn mouse model. Of note, mutations in loop 4 of OmpA enhance the severity of the pathogenesis by allowing the pathogen to survive better in circulation and to produce high bacteremia levels. These results demonstrate, for the first time, the roles played by different regions of extracellular loops of OmpA of E. coli K1 in the pathogenesis of meningitis and may help in designing effective preventive strategies against this deadly disease.

Self-association of unfolded outer membrane proteins

We have investigated self-association propensities of aqueous unfolded (U(AQ)) forms of eight outer membrane proteins (OMPs), OmpA, OmpW, OmpX, PagP, OmpT, OmpLa, FadL, and Omp85. We found that high urea concentrations maintain all of these OMPs as monomers and that OmpA and OmpX remain monomeric upon dilution to 1 M urea. A pH screen showed that basic pH supports the least amount of U(AQ) OMP self-association, consistent with earlier studies showing that basic pH was optimal for better folding efficiencies. The addition of KCl increased U(AQ) OMP self-association, although the magnitudes of the responses were varied. These studies showed that urea can be used to tune the amount of U(AQ) OMP self-association and indicate that the presence of some urea may be useful in optimizing folding conditions because it diminishes aggregation.

Cell-free synthesis and folding of transmembrane OmpA reveals higher order structures and premature truncations

We use a cell-free transcription-translation system to monitor the effect of different lipids on the synthesis and folding of the transmembrane domain of the outer membrane protein OmpA from E. coli under physiological conditions. Folding is consistent with previous observations made in vitro at high pH. Synthesis and folding yields are optimal in phosphocholine lipids, particularly in short chain lipids and small vesicles, while lipid rafts do not promote folding compared to the folding in the absence of lipids. Truncated species are observed during translation in the presence of the periplasmic chaperone Skp, which likely binds to the newly synthesized polypeptide chain during cell-free translation and thus prematurely terminate polypeptide chain synthesis. In contrast, folded and unfolded dimers of OmpA correlate negatively with folding yields. This suggests that dimer formation competes with folding and insertion of monomeric OmpA, though folded dimers slowly appear to convert to folded monomers.

Two new families of the FtsZ-tubulin protein superfamily implicated in membrane remodeling in diverse bacteria and archaea

Several recent discoveries reveal unexpected versatility of the bacterial and archaeal cytoskeleton systems that are involved in cell division and other processes based on membrane remodeling. Here we apply methods for distant protein sequence similarity detection, phylogenetic approaches, and genome context analysis to described two previously unnoticed families of the FtsZ-tubulin superfamily. One of these families is limited in its spread to Proteobacteria whereas the other is represented in diverse bacteria and archaea, and might be the key component of a novel, multicomponent membrane remodeling system that also includes a Von Willebrand A domain-containing protein, a distinct GTPase and membrane transport proteins of the OmpA family.

This article was reviewed by Purificación López-García and Gáspár Jékely; for complete reviews, see the Reviewers Reports section.

Reconstitution of outer membrane protein assembly from purified components

Beta-barrel membrane proteins in Gram-negative bacteria, mitochondria, and chloroplasts are assembled by highly conserved multi-protein complexes. The mechanism by which these molecular machines fold and insert their substrates is poorly understood. It has not been possible to dissect the folding and insertion pathway because the process has not been reproduced in a biochemical system. We purified the components that fold and insert Escherichia coli outer membrane proteins and reconstituted beta-barrel protein assembly in proteoliposomes using the enzymatic activity of a protein substrate to report on its folding state. The assembly of this protein occurred without an energy source but required a soluble chaperone in addition to the multi-protein assembly complex.

The cholesterol-dependent cytolysin family of gram-positive bacterial toxins

The cholesterol-dependent cytolysins (CDCs) are a family of beta-barrel pore-forming toxins secreted by Gram-positive bacteria. These toxins are produced as water-soluble monomeric proteins that after binding to the target cell oligomerize on the membrane surface forming a ring-like pre-pore complex, and finally insert a large beta-barrel into the membrane (about 250 A in diameter). Formation of such a large transmembrane structure requires multiple and coordinated conformational changes. The presence of cholesterol in the target membrane is absolutely required for pore-formation, and therefore it was long thought that cholesterol was the cellular receptor for these toxins. However, not all the CDCs require cholesterol for binding. Intermedilysin, secreted by Streptoccocus intermedius only binds to membranes containing a protein receptor, but forms pores only if the membrane contains sufficient cholesterol. In contrast, perfringolysin O, secreted by Clostridium perfringens, only binds to membranes containing substantial amounts of cholesterol. The mechanisms by which cholesterol regulates the cytolytic activity of the CDCs are not understood at the molecular level. The C-terminus of perfringolysin O is involved in cholesterol recognition, and changes in the conformation of the loops located at the distal tip of this domain affect the toxin-membrane interactions. At the same time, the distribution of cholesterol in the membrane can modulate toxin binding. Recent studies support the concept that there is a dynamic interplay between the cholesterol-binding domain of the CDCs and the excess of cholesterol molecules in the target membrane.

Differential bacterial surface display of peptides by the transmembrane domain of OmpA

Peptide libraries or antigenic determinants can be displayed on the surface of bacteria through insertion in a suitable outer membrane scaffold protein. Here, we inserted the well-known antibody epitopes 3xFLAG and 2xmyc in exterior loops of the transmembrane (TM) domain of OmpA. Although these highly charged epitopes were successfully displayed on the cell surface, their levels were 10-fold reduced due to degradation. We verified that the degradation was not caused by the absence of the C-terminal domain of OmpA. In contrast, a peptide that was only moderately charged (SA-1) appeared to be stably incorporated in the outer membrane at normal protein levels. Together, these results suggest that the display efficiency is sensitive to the charge of the inserted epitopes. In addition, the high-level expression of OmpA variants with surface-displayed epitopes adversely affected growth in a strain dependent, transient manner. In a MC4100 derived strain growth was affected, whereas in MC1061 derived strains growth was unaffected. Finally, results obtained using a gel-shift assay to monitor β-barrel folding in vivo show that the insertion of small epitopes can change the heat modifiability of the OmpA TM domain from ‘aberrant’ to normal, and predict that some β-barrels will not display any significant heat-modifiability at all.

Binding regions of outer membrane protein A in complexes with the periplasmic chaperone Skp. A site-directed fluorescence study

Periplasmic Skp facilitates folding and membrane insertion of many outer membrane proteins (OMPs) into the outer membrane of Gram-negative bacteria. We have examined the binding sites of outer membrane protein A (OmpA) from Escherichia coli in its complexes with the membrane protein chaperone Skp and with Skp and lipopolysaccharide (LPS) by site-directed fluorescence spectroscopy. Single-Trp OmpA mutants, W(n)-OmpA, with tryptophan at position n in the polypeptide chain were isolated in the unfolded form in 8 M urea. In five beta(x)W(n)-OmpA mutants, the tryptophan was located in beta-strand x, in four l(y)W(n)-OmpA mutants, in outer loop y, and in three t(z)W(n)-OmpA mutants in turn z of the beta-barrel transmembrane domain (TMD) of OmpA. PDW(286)-OmpA contained tryptophan in the periplasmic domain (PD). After dilution of the denaturant urea in aqueous solution, spectra indicated a more hydrophobic environment of the tryptophans in beta(x)W(n) mutants in comparison to l(y)W(n)-OmpA and t(z)W(n)-OmpA, indicating that the loops and turns form the surface of hydrophobically collapsed OmpA, while the strand regions are less exposed to water. Addition of Skp increased the fluorescence of all OmpA mutants except PDW(286)-OmpA, demonstrating binding of Skp to the entire beta-barrel domain but not to the PD of OmpA. Skp bound the TMD of OmpA asymmetrically, displaying much stronger interactions with strands beta(1) to beta(3) in the N-terminus than with strands beta(5) to beta(7) in the C-terminus. This asymmetry was not observed for the outer loops and the periplasmic turns of the TMD of OmpA. The fluorescence results demonstrated that all turns and loops l(1), l(2), and l(4) were as strongly bound to Skp as the N-terminal beta-strands. Addition of five negatively charged LPS per one preformed Skp.W(n)-OmpA complex released the C-terminal loops l(2), l(3), and l(4) of the TMD of OmpA from the complex, while its periplasmic turn regions remained bound to Skp. Our results demonstrate that interactions of Skp.OmpA complexes with LPS change the conformation of OmpA in the Skp complex for facilitated insertion and folding into membranes.

One membrane protein, two structures and six environments: a comparative molecular dynamics simulation study of the bacterial outer membrane protein PagP

PagP is a bacterial outer membrane protein consisting of an 8 stranded transmembrane beta-barrel and an N-terminal alpha-helix. It is an enzyme which catalyses transfer of a palmitoyl chain from a phospholipid to lipid A. Molecular dynamics simulations have been used to compare the dynamic behaviour in simulations starting from two different structures (X-ray vs. NMR) and in six different environments (detergent micelles formed by dodecyl phosphocholine and by octyl glucoside, vs. four species of phospholipid bilayer). Analysis of interactions between the protein and its environment reveals the role played by the N-terminal alpha-helix, which interacts with the lipid headgroups to lock the PagP molecule into the bilayer. The PagP beta-barrel adopts a tilted orientation in lipid bilayers, facilitating access of lipid tails into the mouth of the central binding pocket. In simulations starting from the X-ray structure in lipid bilayer, the L1 and L2 loops move towards one another, leading to the formation of a putative active site by residues H33, D76 and S77 coming closer together.

Microscale NMR screening of new detergents for membrane protein structural biology

The rate limiting step in biophysical characterization of membrane proteins is often the availability of suitable amounts of protein material. It was therefore of interest to demonstrate that microcoil nuclear magnetic resonance (NMR) technology can be used to screen microscale quantities of membrane proteins for proper folding in samples destined for structural studies. Micoscale NMR was then used to screen a series of newly designed zwitterionic phosphocholine detergents for their ability to reconstitute membrane proteins, using the previously well characterized beta-barrel E. coli outer membrane protein OmpX as a test case. Fold screening was thus achieved with microgram amounts of uniformly (2)H, (15)N-labeld OmpX and affordable amounts of the detergents, and prescreening with SDS-gel electrophoresis ensured efficient selection of the targets for NMR studies. A systematic approach to optimize the phosphocholine motif for membrane protein refolding led to the identification of two new detergents, 138-Fos and 179-Fos, that yield 2D [ (15)N, (1)H]-TROSY correlation NMR spectra of natively folded reconstituted OmpX.

A molecular Swiss army knife: OmpA structure, function and expression

The OmpA outer membrane protein of Escherichia coli and other enterobacteria is a multifaceted protein. This protein is expressed to very high levels and ompA is tightly regulated at the posttranscriptional level. It can function as an adhesin and invasin, participate in biofilm formation, act as both an immune target and evasin, and serves as a receptor for several bacteriophages. Many of these properties are due to four short protein loops that emanate from the protein to the outside of the cell. Herein it is described how the structure of this protein relates to its many functions.

Correct folding of the beta-barrel of the human membrane protein VDAC requires a lipid bilayer

Spontaneous membrane insertion and folding of beta-barrel membrane proteins from an unfolded state into lipid bilayers has been shown previously only for few outer membrane proteins of Gram-negative bacteria. Here we investigated membrane insertion and folding of a human membrane protein, the isoform 1 of the voltage-dependent anion-selective channel (hVDAC1) of mitochondrial outer membranes. Two classes of transmembrane proteins with either alpha-helical or beta-barrel membrane domains are known from the solved high-resolution structures. VDAC forms a transmembrane beta-barrel with an additional N-terminal alpha-helix. We demonstrate that similar to bacterial OmpA, urea-unfolded hVDAC1 spontaneously inserts and folds into lipid bilayers upon denaturant dilution in the absence of folding assistants or energy sources like ATP. Recordings of the voltage-dependence of the single channel conductance confirmed folding of hVDAC1 to its active form. hVDAC1 developed first beta-sheet secondary structure in aqueous solution, while the alpha-helical structure was formed in the presence of lipid or detergent. In stark contrast to bacterial beta-barrel membrane proteins, hVDAC1 formed different structures in detergent micelles and phospholipid bilayers, with higher content of beta-sheet and lower content of alpha-helix when inserted and folded into lipid bilayers. Experiments with mixtures of lipid and detergent indicated that the content of beta-sheet secondary structure in hVDAC1 decreased at increased detergent content. Unlike bacterial beta-barrel membrane proteins, hVDAC1 was not stable even in mild detergents such as LDAO or dodecylmaltoside. Spontaneous folding of outer membrane proteins into lipid bilayers indicates that in cells, the main purpose of membrane-inserted or associated assembly factors may be to select and target beta-barrel membrane proteins towards the outer membrane instead of actively assembling them under consumption of energy as described for the translocons of cytoplasmic membranes.

An unfolding story of helical transmembrane proteins

Reversible unfolding of helical transmembrane proteins could provide valuable information about the free energy of interaction between transmembrane helices. Thermal unfolding experiments suggest that this process for integral membrane proteins is irreversible. Chemical unfolding has been accomplished with organic acids, but the unfolding or refolding pathways involve irreversible steps. Sodium dodecyl sulfate (SDS) has been used as a perturbant to study reversible unfolding and refolding kinetics. However, the interpretation of these experiments is not straightforward. It is shown that the results could be explained by SDS binding without substantial unfolding. Furthermore, the SDS-perturbed state is unlikely to include all of the entropy terms involved in an unfolding process. Alternative directions for future research are suggested: fluorinated alcohols in homogeneous solvent systems, inverse micelles, and fragment association studies.