Interfacial rheology of protein–surfactant mixtures

Interfacial dilatational and emulsifying properties of ultrasound-treated pea protein

In this study, the structural, interfacial, and emulsifying properties of high-intensity ultrasound (HUS)-treated pea protein isolate (PPI_US) were investigated. HUS at 50% amplitude and 57-60 W·cm^-2 for 5 min markedly improved protein solubility (by 132%), surface hydrophobicity (by 173%), and reduced particle size (by 52%). These physicochemical changes in PPI_US led to more rapid protein adsorption at the oil-water interface, improved emulsifying activity (by 18-27%) and capacity (by 11%), and enhanced emulsion physical stability. The multilayer nature, albeit less elastic, of the interfacial membrane formed by PPI_US when compared to control protein (PPI_C), based on dilatational testing, contributed to the above results. Moreover, PPI_US-stabilized emulsions exhibited a tendency of being less susceptible to lipid oxidation during storage. Thus, structure-modifying HUS may be a valuable processing technology for the manufacture of pea protein-based emulsion foods.

Microgels at interfaces, from mickering emulsions to flat interfaces and back

In this review, we cover the topic of p(NIPAM) based microgels at interfaces, revisiting classical studies in light of the newest ones. In particular, we focus on their use as emulsifiers in the so-called mickering emulsions, i.e. Pickering emulsion stabilized by soft particles. Given the complexity of the experimental characterization and simulation of these soft particles at interfaces, the review is structured in progressive complexity levels, until we reach the highly interesting and promising responsiveness to stimuli of mickering emulsions. We start from the lowest level of complexity, the current understanding of the behavior of single microgels confined at a flat interface. Then, we discuss their collective behavior upon crowding, their responsiveness at interfaces, and their macroscopic properties as microgel films. Once we have the necessary characterization tools, we proceed to discuss the complex and convoluted picture of responsive mickering emulsions. The way is rough, with current controversial and contradicting studies, but it holds promising results as well. We state open questions worth of being tackled by the Soft Matter community, and we conclude that it is worth the trouble of continuing after the master theory of microgel interfacial activity, as it will pave the way to widely adopt responsive mickering emulsions as the worthy Pickering emulsion successors.

A miniaturized radial Langmuir trough for simultaneous dilatational deformation and interfacial microscopy

INNOVATION

Interfacial rheological properties of complex fluid-fluid interfaces are strongly influenced by the film microstructure. Experimental investigations for correlating interfacial morphology and rheology are notoriously challenging. A miniaturized radial Langmuir trough was developed to study complex fluid-fluid interfaces under purely dilatational deformations that operates in tandem with a conventional inverted microscope for simultaneous interfacial visualization.

EXPERIMENTS

Two materials were investigated at an air-water interface: poly(tert-butyl methacrylate) (PtBMA) and dipalmitoylphosphatidylcholine (DPPC). Surface pressure measurements made in the radial Langmuir trough were compared with a commercial rectangular Langmuir trough. Interfacial in situ visualization for each material was performed during the compression cycle in the radial trough. Challenges associated with the small size of the radial Langmuir trough, such as the influence of capillary deformation on the measured surface pressure, are also quantified.

FINDINGS

Measured surface pressures between the newly developed radial trough and the rectangular Langmuir trough compare well. Micrographs obtained in the radial Langmuir trough were used to obtain film properties such as Young's modulus. The new advance in colloid and interface science is the ability to capture structure-property relationships of planar interfaces using microscopy and purely dilatational deformation. This will advance the development of constitutive modeling of complex fluid-fluid interfaces.

Interactions of β-carotene with WPI/Tween 80 mixture and oil phase: Effect on the behavior of O/W emulsions during in vitro digestion

This study investigated the impact of adding β-carotene on the structure of fresh O/W emulsions with different oil phase (sunflower oil-LCT or NEOBEE®1053-MCT) and emulsifiers (WPI, Tween 80 - T80 or WPI/T80 mixture). In this sense, the behavior of emulsions through the gastrointestinal tract, the stability and bioaccessibility of β-carotene were also assessed. The β-carotene reduced the interfacial tension of the LCT/MCT-water systems. The addition of β-carotene promoted an increase of viscoelasticity of LCT/MCT-T80 (0.5%WPI/0.5%T80 and 1%T80 w/w) interfaces, but an increase of WPI content reduced the viscoelasticity of interfacial layers (LCT/MCT-1% WPI). These changes in the interface properties influenced the mean droplet size and ζ-potential of the fresh emulsions. LCT systems presented similar bioaccessibility/stability of β-carotene. However, β-carotene entrapped within protein-coated MCT droplets was more stable than within T80-MCT systems. Our results show that β-carotene interacted with other ingredients of emulsions changing their properties and behavior under gastrointestinal tract as well as the stability/bioaccessibility of β-carotene.

Effect of ultrasonication on the stability and storage of a soy protein isolate-phosphatidylcholine nanoemulsions

Phosphatidylcholine-soybean protein isolate (PC-SPI) nanoemulsions were prepared by ultrasonication. The effects of preparation conditions (SPI and PC addition, ultrasonic power and time) on the structural properties of the nanoemulsions and their storage stability were investigated. The results showed that the most optimal adsorption capacity and adsorption tightness at the oil-water interface under optimal conditions (1.5% SPI, 0.20% PC, 500 W ultrasonic power and 9 min ultrasonic time) were exhibited by the SPI-PC conjugate, which demonstrated that this nanoemulsions can be categorized as a high-quality emulsion suitable for research. To test its stability, and the high-quality nanoemulsion of β-carotene was stored. After degradation of the nanoemulsions during storage, β-carotene was released. The β-carotene retention rate of the high-quality emulsion was maintained above 86% at different temperatures in the absence of light for up to 30 days. This study provides new information for the development of transport and stability systems for nanoemulsions.

Effect of Added Tetraalkylammonium Counterions on the Dilational Rheological Behaviors of N-Cocoyl Glycinate

Ion specific effect, which is also known as Hofmeister effect, has been reported in numerous systems including ionic surfactant aggregates. Acyl amino acid surfactants have attracted growing attentions in the field of novel surfactants research due to their environmentally benign characteristics. The objective of this study was to investigate the effect of different salts containing NH₄⁺ and tetraalkylammonium (TAA⁺), where alkyl = methyl (TMA⁺), ethyl (TEA⁺), and propyl (TPA⁺), cations on the dilational rheological properties of interfacial film are stabilized by potassium N-cocoyl glycinate (KCGl). The interfacial behaviors were studied using oscillating drop shape analysis method. The interfacial tensions (IFTs) and dilational rheological parameters results illustrate that KCGl in the presence of salts has better interfacial activity and stronger intermolecular interaction, indicating that added cations contribute to denser molecular packing at oil-water interface. Ion specific effects were observed in the system. Among the cations, KCGl shows highest dilational modulus in the presence of NH₄⁺. The overall interaction between cations and headgroups of KCGl decreases in the sequence NH₄⁺ >TMA⁺ >TEA⁺ ≈TPA⁺, which follows Hofmeister series. The increasing hydrophobicity of TAA⁺ prevents the interaction between cations and KCGl's headgroup, and therefore prevent amphiphiles from packing closely at interface. The results present a theoretical origin for useful application of KCGl in cosmetics, petroleum and daily chemical industries.

Interaction between soyasaponin and soy β-conglycinin or glycinin: Air-water interfacial behavior and foaming property of their mixtures

The interaction between soyasaponin and soy β-conglycinin (7S) or glycinin (11S), adsorption of their mixtures at air-water interface, and foaming properties of the mixed system were investigated in this study. Fluorescence spectroscopy results showed that there was a weak binding of soyasaponin with 7S or 11S in bulk solutions, leading to the conformational changes of protein by nonspecific hydrophobic interactions. Dynamic surface properties of soyasaponin-7S/11S mixtures indicated that the composite layers formed via their weak interactions due to the synergy of reducing surface tension and the plateau of elasticity at the interface. Most mixtures represented high foam forming ability and stability except 0.2 % soyasaponin mixture, which could be a consequence that the surface behavior was dominated by soyasaponin under this concentration, and low surface elasticity lead to a less stable interfacial film. Overall, foamability of soyasaponin-7S mixtures were better than 11S ones. All data of this work was helpful to understand air-water behaviors of soyasaponin-7S/11S mixtures. This mixed system has shown good potential for further foam related industrial applications.

Aqueous colloidal systems of bovine serum albumin and functionalized surface active ionic liquids for material transport

Physicochemical and computational investigation of complexation between BSA and SAILs with application in material transport.

Adsorption properties of plant based bio-surfactants: Insights from neutron scattering techniques

There is an increasing interest in biosustainable surfactants and surface active proteins for a range of applications, in home and personal care products, cosmetics, pharmaceuticals, and food and drink formulations. This review focuses on two plant derived biosurfactants, the surface active glycoside, saponin, and the surface active globular protein, hydrophobin. A particular emphasis in the review is on the role of neutron reflectivity in probing the adsorption, structure of the adsorbed layer, and their mixing at the interface with a range of more conventional surfactants and proteins.

Role of protein-cellulose nanocrystal interactions in the stabilization of emulsion

HYPOTHESIS

The interactions between two bio-based emulsifiers, namely cellulose nanocrystals (CNC) and the surface active sodium caseinate (CAS), can influence the formation and stability of oil-in-water emulsion (O/W).

EXPERIMENTS

After studying the interactions between CNC and CAS, in bulk, and at air-water and liquid-liquid interfaces, emulsions have been prepared through different routes of addition, at pH 7 and 3, at which CNC and CAS had repulsive and attractive interactions, respectively. The routes of addition were (1) CAS and CNC simultaneously, (2) CAS first followed by CNC in a subsequent emulsification step and (3) CNC first, followed by CAS. The emulsions were characterized by laser diffraction and optical microscopy.

FINDINGS

At pH 7, in the case of repulsive interactions, the surface activity of CAS was balanced by the irreversible adsorption of CNC, irrespectively of the route of emulsification. At pH 3, in the case of attractive interactions, using route (1), the aggregates CAS-CNC provided better emulsification than CNC and CAS alone. For emulsions prepared by route (2) and (3), gelling was observed which could be controlled through the order of addition. Emulsions prepared at pH 7 then adjusted to pH 3 exhibited an increase in viscosity, while the droplet size was not affected.

Quillaja Saponin Characteristics and Functional Properties

Consumer concerns about synthetically derived food additives have increased current research efforts to find naturally occurring alternatives. This review focuses on a group of natural surfactants, the Quillaja saponins, that can be extracted from the Quillaja saponaria Molina tree. Quillaja saponins are triterpenoid saponins comprising a hydrophobic quillaic acid backbone and hydrophilic sugar moieties. Commercially available Quillaja saponin products and their composition and properties are described, and the technofunctionality of Quillaja saponins in a variety of food, cosmetic, and pharmaceutical product applications is discussed. These applications make use of the biological and interfacial activities of Quillaja saponins and their ability to form and stabilize colloidal structures such as emulsions, foams, crystallized lipid particles, heteroaggregates, and micelles. Further emphasis is given to the complexation and functional properties of Quillaja saponins with other cosurfactants to create mixed surfactant systems, an approach that has the potential to facilitate new interfacial structures and novel functionalities.

Foaming Properties and Linear and Nonlinear Surface Dilatational Rheology of Sodium Caseinate, Tannin Acid, and Octenyl Succinate Starch Ternary Complex

In this paper, the foaming and surface properties of sodium caseinate (SC), sodium caseinate/tannin acid (SC/TA), sodium caseinate/octenyl succinate starch (SC/OSA-starch), and sodium caseinate/tannin acid/octenyl succinate starch (SC/TA/OSA-starch) complex systems are described. First, foaming properties of different samples were compared at pH 6.0. The interface adsorption and linear surface dilatational rheological of different samples were characterized in the linear viscoelastic region to explore the relationship between macroscopic foaming properties and surface properties. At equal protein concentrations, the foamability and foam stability of the SC/TA/OSA-starch complex was markedly higher than that of the SC/TA complex. Meanwhile, the surface properties of the SC/TA/OSA-starch complex were also superior to those of the SC/TA complex. Finally, to investigate the nonlinear surface dilatational rheological behavior of the air/water interface stabilized by complex systems, the large-amplitude oscillatory dilatational rheology and Lissajous plots were studied. For the SC/TA/OSA-starch complex, the OSA-starch increases the degree of strain softening in extension, suggesting that the surface structure may change from a surface gel to a mixed phase of SC/TA patches and OSA-starch domains. These findings indicate that the complex formed between polyphenols, proteins, and polysaccharides could be used as a good alternative to understand and, consequently, improve the surface and foaming properties in food matrices.

Evaluation of different saccharides and chitin as eco-friendly additive to improve the magnetic cross-linked enzyme aggregates (CLEAs) activities

The cross-linked enzyme aggregates (CLEAs) involves formation of a number of covalent bonds between enzyme and the matrix using glutaraldehyde. In general, amino groups of lysine, sulfhydryl groups of cysteine, phenolic OH groups of tyrosine, or imidazol group of histidine are used for enzyme binding under mild conditions. The main advantage of this method is its simplicity, economic advantages in the industrial bio catalysis. The Fe₃O₄ magnetic nanoparticles were synthesized by coprecipitating Fe²⁺and Fe³⁺in alkaline solution. Tannic acid was used to functionalize the Fe₃O₄ magnetic nanoparticles. After functionalization process, tannic acid magnetic cross-linked enzyme aggregates of enzyme (TA-MNPs-CLEAs) were prepared by cross-linking of enzyme aggregates with different saccharides as additive. The present result reported high stability, simplicity, low cost and recyclability of a saccharide-TA-MNPs-CLEAs-enzyme make it efficient as a highly active biocatalyst in biotechnological applications. The obtained results suggest that disaccharides (maltose, sucrose and lactose) and polysaccharide such as starch are eco-friendly additives to TA-MNPs-lipase and TA-MNPs-CLEAs-peroxidase and can become a powerful biocatalyst in industry applications.

Bulk, Foam, and Interfacial Properties of Tannic Acid/Sodium Caseinate Nanocomplexes

For this work, the aim was to investigate the adsorption of the tannic acid (TA)/sodium caseinate (SC) nanocomplexes at the air/water interface and then to research its relationship with foam properties. First, nanocomplexes were prepared in a different mass ratio of TA and SC. The bulk behavior of nanocomplexes was evaluated by dynamic light scattering (DLS), signal-intensifying fluorescence probe (ANS), etc. As the concentration of TA increased, the z-average siameter ( D _z) of TA/SC nanocomplexes decreased gradually and the negative charge increased. Meanwhile, the surface hydrophobicity ( S_o) of the SC also decreased after the addition of TA. The interfacial properties were determined by dynamic surface tension and dilational rheology. The presence of polyphenols decreased the surface pressure (π) that resulted in poor foamability. However, the elastic ( E_d) component of the dilational modulus of films also increased as polyphenols concentration increased, which gave rise to admirable foam stability. The contribution of polyphenols to stabilize foam columns may be caused by interfacial interaction between proteins and polyphenols.

Calcium Alters the Interfacial Organization of Hydrolyzed Lipids during Intestinal Digestion

Calcium plays an important dual role in lipid digestion: promoting removal of long-chain fatty acids from the oil-water interface by forming insoluble calcium soaps while also limiting their bioaccessibility. This becomes more significant in food containing high calcium concentration, such as dairy products. Nevertheless, scarce attention has been paid to the effect of calcium on the interfacial properties during lipid digestion, despite this being largely an interfacial reaction. This study focused on the dynamics of the formation of calcium soaps at the oil-water interface during lipolysis by pancreatic lipase in the absence and presence of the two primary human bile salts (sodium glycocholate or sodium glycochenodeoxycholate). The competitive adsorption of lipase, bile salts, and lipolysis products, as well as the formation of calcium soaps in the presence of increasing concentrations of calcium were mainly characterized by recording the interfacial tension and dilatational modulus in situ. In the absence of bile salts, calcium complexes with fatty acids at the oil-water interface forming a relatively strong viscoelastic network of calcium soaps over time. The dilatational modulus of the calcium soap network is directly related to the interfacial concentration of lipolysis products and the calcium bulk concentration. Calcium soaps are also visualized forming a continuous rough layer on the surface of oil droplets immersed in simulated intestinal aqueous phase. Despite bile salts having different surface activity, they play a similar role on the interfacial competition with lipase and lipolysis products although altering their kinetics. The presence of bile salts disrupts the network of calcium soaps, as suggested by the decrease in the dilatational modulus and the formation of calcium soap islands on the surface of the oil droplets. The accelerant effect of calcium on lipolysis is probably because of fatty acid complexation and subsequent removal from the interface rather than reduced electrostatic repulsion between lipase and bile salt molecules and promoted lipase adsorption. The work shown here has implications for the delivery of oil-soluble bioactives in the presence of calcium.

Dilational Viscoelasticity of Proteins Solutions in Dynamic Conditions

Drop profile analysis tensiometry used in the oscillating drop mode provides the dilational viscoelasticity of adsorption layers at liquid interfaces. Applied during the progress of adsorption the dynamic surface rheology can be monitored. For β-casein solutions at the same surface pressure values, the larger the dynamic dilational viscoelasticity the longer the adsorption time, i.e., the smaller the studied protein concentration is. For β-lactoglobulin and human serum albumin, the differences in the viscoelasticity values are less or not dependent on the adsorption time at identical surface pressures. The observed effects are caused by the flexibility of BCS, while the globular proteins BLG and HSA do not change their conformation significantly within the adsorption layer.

A Study of the Stability Mechanism of the Dispersed Particle Gel Three-Phase Foam Using the Interfacial Dilational Rheology Method

The dispersed particle gel (DPG) three-phase foam is a novel profile control and flooding system. The stability mechanism of the DPG three-phase foam was studied using an interfacial dilational rheology method. The results show that the elastic modulus of the DPG three-phase foam is up to 14 mN/m, which is much higher than the traditional foam. The increase in interface elasticity produces significantly positive effects on foam stability. Emphasis is given to the influences of frequency, temperature, pressure, and concentration on the viscoelasticity and interfacial adsorption of DPG particles, which change the modules of the foam interface and have a significant effect on foam stability. In addition, the microstructure of the DPG three-phase foam was observed. A viscoelastic shell is formed by the aggregation of the DPG particles on the interface. The irreversible adsorption gives the interface high elasticity and mechanical strength. The electrostatic repulsion between particles increases the spacing between bubbles. The combined effects of these factors give the interface higher mechanical strength, slow down the film drainage, effectively prevent gas permeation, and significantly improve the foam stability.