Real-time imaging of DNA ejection from single phage particles

Knot-controlled ejection of a polymer from a virus capsid

We present a numerical study of the effect of knotting on the ejection of flexible and semiflexible polymers from a spherical, viruslike capsid. The polymer ejection rate is primarily controlled by the knot, which moves to the hole in the capsid and then acts as a ratchet. Polymers with more complex knots eject more slowly and, for large knots, the knot type, and not the flexibility of the polymer, determines the rate of ejection. We discuss the relation of our results to the ejection of DNA from viral capsids and conjecture that this process has the biological advantage of unknotting the DNA before it enters a cell.

Origin and function of the two major tail proteins of bacteriophage SPP1

The majority of bacteriophages have a long non-contractile tail (Siphoviridae) that serves as a conduit for viral DNA traffic from the phage capsid to the host cell at the beginning of infection. The 160-nm-long tail tube of Bacillus subtilis bacteriophage SPP1 is shown to be composed of two major tail proteins (MTPs), gp17.1 and gp17.1*, at a ratio of about 3:1. They share a common amino-terminus, but the latter species has approximately 10 kDa more than gp17.1. A CCC.UAA sequence with overlapping proline codons at the 3' end of gene 17.1 drives a programmed translational frameshift to another open reading frame. The recoding event generates gp17.1*. Phages carrying exclusively gp17.1 or gp17.1* are viable, but tails are structurally distinct. gp17.1 and the carboxyl-terminus of gp17.1* have a distinct evolutionary history correlating with different functions: the polypeptide sequence identical in the two proteins is responsible for assembly of the tail tube while the additional module of gp17.1* shields the structure exterior exposed to the environment. The carboxyl-terminal extension is an elaboration present in some tailed bacteriophages. Different extensions were found to combine in a mosaic fashion with the MTP essential module in a subset of Siphoviridae genomes.

Biophysics of viral infectivity: matching genome length with capsid size

In this review, we discuss recent advances in biophysical virology, presenting experimental and theoretical studies on the physical properties of viruses. We focus on the double-stranded (ds) DNA bacteriophages as model systems for all of the dsDNA viruses both prokaryotic and eukaryotic. Recent studies demonstrate that the DNA packaged into a viral capsid is highly pressurized, which provides a force for the first step of passive injection of viral DNA into a bacterial cell. Moreover, specific studies on capsid strength show a strong correlation between genome length, and capsid size and robustness. The implications of these newly appreciated physical properties of a viral particle with respect to the infection process are discussed.

See me, feel me: methods to concurrently visualize and manipulate single DNA molecules and associated proteins

Direct visualization of DNA and proteins allows researchers to investigate DNA–protein interactions with great detail. Much progress has been made in this area as a result of increasingly sensitive single-molecule fluorescence techniques. At the same time, methods that control the conformation of DNA molecules have been improving constantly. The combination of both techniques has appealed to researchers ever since single-molecule measurements have become possible and indeed first implementations of such combined approaches have proven useful in the study of several DNA-binding proteins in real time. Here, we describe the technical state-of-the-art of various integrated manipulation-and-visualization methods. We first discuss methods that allow only little control over the DNA conformation, such as DNA combing. We then describe DNA flow-stretching approaches that allow more control, and end with the full control on position and extension obtained by manipulating DNA with optical tweezers. The advantages and limitations of the various techniques are discussed, as well as several examples of applications to biophysical or biochemical questions. We conclude with an outlook describing potential future technical developments in combining fluorescence microscopy with DNA micromanipulation technology.

Bacteriophage infection is targeted to cellular poles

The poles of bacteria exhibit several specialized functions related to the mobilization of DNA and certain proteins. To monitor the infection of Escherichia coli cells by light microscopy, we developed procedures for the tagging of mature bacteriophages with quantum dots. Surprisingly, most of the infecting phages were found attached to the bacterial poles. This was true for a number of temperate and virulent phages of E. coli that use widely different receptors and for phages infecting Yersinia pseudotuberculosis and Vibrio cholerae. The infecting phages colocalized with the polar protein marker IcsA-GFP. ManY, an E. coli protein that is required for phage lambda DNA injection, was found to localize to the bacterial poles as well. Furthermore, labelling of lambda DNA during infection revealed that it is injected and replicated at the polar region of infection. The evolutionary benefits that lead to this remarkable preference for polar infections may be related to lambda's developmental decision as well as to the function of poles in the ability of bacterial cells to communicate with their environment and in gene regulation.

Intercalating dye as an acceptor in quantum-dot-mediated FRET

Fluorescence resonance energy transfer (FRET) is a popular tool to study intermolecular distances and characterize structural or conformational changes of biological macromolecules. We investigate a novel inorganic/organic FRET pair with quantum dots (QDs) as donors and DNA intercalating dyes, BOBO-3, as acceptors by using DNA as a linker. Typically, FRET efficiency increases with the number of stained DNA linked to a QD. However, with the use of intercalating dyes, we demonstrate that FRET efficiency at a fixed DNA:QD ratio can be further enhanced by increasing the number of dyes stained to a DNA strand through the use of an increased staining dye/bp ratio. We exploit this flexibility in the staining ratio to maintain a high FRET efficiency of >0.90 despite a sixfold decrease in DNA concentration. Having characterized this new QD-mediated FRET system, we test this system in a cellular environment using nanocomplexes generated by encapsulating DNA with commercial non-viral gene carriers. Using this novel FRET pair, we are able to monitor the configuration changes and fate of the DNA nanocomplexes during intracellular delivery, thereby providing an insight into the mechanistic study of gene delivery.

Ejection dynamics of polymeric chains from viral capsids: effect of solvent quality

We present simulations investigating the effects of solvent quality on the dynamics of flexible (RNA-like) and semiflexible (DNA-like) polymers ejecting from spherical viral capsids. We find that the mean ejection time increases and the ejection time distributions are broadened as the solvent quality decreases. Our results thus suggest that DNA ejection may be very efficiently controlled by tuning the salt concentration in the environment, in agreement with recent experimental findings. We also observe random pauses in the ejection. These become extremely long for semiflexible polymers at lower solvent quality, and we interpret this as a signature of a low driving force for ejection. We find that, for most polymers, ejection is an all-or-nothing process at the solvent conditions we investigated: polymers normally completely eject once the process is initiated.

Pressure built by DNA packing inside virions: enough to drive DNA ejection in vitro, largely insufficient for delivery into the bacterial cytoplasm

Tailed bacteriophage particles carry DNA highly pressurized inside the capsid. Challenge with their receptor promotes release of viral DNA. We show that addition of the osmolyte polyethylene glycol (PEG) has two distinct effects in bacteriophage SPP1 DNA ejection. One effect is to inhibit the trigger for DNA ejection. The other effect is to exert an osmotic pressure that controls the extent of DNA released in phages that initiate ejection. We carried out independent measurements of each effect, which is an essential requirement for their quantitative study. The fraction of phages that do not eject increased linearly with the external osmotic pressure. In the remaining phage particles ejection stopped after a defined amount of DNA was reached inside the capsid. Direct measurement of the size of non-ejected DNA by gel electrophoresis at different PEG concentrations in the latter sub-population allowed determination of the external osmotic pressure that balances the force powering DNA exit (47 atm for SPP1 wild-type). DNA exit stops when the ejection force mainly due to repulsion between DNA strands inside the SPP1 capsid equalizes the force resisting DNA insertion into the PEG solution. Considering the turgor pressure in the Bacillus subtilis cytoplasm the energy stored in the tight phage DNA packing is only sufficient to power entry of the first 17% of the SPP1 chromosome into the cell, the remaining 83% requiring application of additional force for internalization.

Real-time observations of single bacteriophage lambda DNA ejections in vitro

The physical, chemical, and structural features of bacteriophage genome release have been the subject of much recent attention. Many theoretical and experimental studies have centered on the internal forces driving the ejection process. Recently, Mangenot et al. [Mangenot S, Hochrein M, Rädler J, Letellier L (2005) Curr Biol 15:430-435.] reported fluorescence microscopy of phage T5 ejections, which proceeded stepwise between DNA nicks, reaching a translocation speed of 75 kbp/s or higher. It is still unknown how high the speed actually is. This paper reports real-time measurements of ejection from phage lambda, revealing how the speed depends on key physical parameters such as genome length and ionic state of the buffer. Except for a pause before DNA is finally released, the entire 48.5-kbp genome is translocated in approximately 1.5 s without interruption, reaching a speed of 60 kbp/s. The process gives insights particularly into the effects of two parameters: a shorter genome length results in lower speed but a shorter total time, and the presence of divalent magnesium ions (replacing sodium) reduces the pressure, increasing ejection time to 8-11 s. Pressure caused by DNA-DNA interactions within the head affects the initiation of ejection, but the close packing is also the dominant source of friction: more tightly packed phages initiate ejection earlier, but with a lower initial speed. The details of ejection revealed in this study are probably generic features of DNA translocation in bacteriophages and have implications for the dynamics of DNA in other biological systems.

Portal motor velocity and internal force resisting viral DNA packaging in bacteriophage phi29

During the assembly of many viruses, a powerful molecular motor compacts the genome into a preassembled capsid. Here, we present measurements of viral DNA packaging in bacteriophage phi29 using an improved optical tweezers method that allows DNA translocation to be measured from initiation to completion. This method allowed us to study the previously uncharacterized early stages of packaging and facilitated more accurate measurement of the length of DNA packaged. We measured the motor velocity versus load at near-zero filling and developed a ramped DNA stretching technique that allowed us to measure the velocity versus capsid filling at near-zero load. These measurements reveal that the motor can generate significantly higher velocities and forces than detected previously. Toward the end of packaging, the internal force resisting DNA confinement rises steeply, consistent with the trend predicted by many theoretical models. However, the force rises to a higher magnitude, particularly during the early stages of packaging, than predicted by models that assume coaxial inverse spooling of the DNA. This finding suggests that the DNA is not arranged in that conformation during the early stages of packaging and indicates that internal force is available to drive complete genome ejection in vitro. The maximum force exceeds 100 pN, which is about one-half that predicted to rupture the capsid shell.

DNA ejection from bacteriophage: towards a general behavior for osmotic-suppression experiments

We present in this work in vitro measurements of the force ejecting DNA from two distinct bacteriophages (T5 and lambda using the osmotic-suppression technique. Our data are analyzed by revisiting the current theories of DNA packaging in spherical capsids. In particular we show that a simplified analytical model based on bending considerations only is able to account quantitatively for the experimental findings. Physical and biological consequences are discussed.

Effects of condensing agent and nuclease on the extent of ejection from phage lambda

We have recently demonstrated, that DNA ejection from bacteriophage lambda can be partially or completely suppressed in vitro by external osmotic pressure. This suggests that DNA ejection from phage is driven by an internal mechanical force consisting of DNA bending and DNA-DNA electrostatic repulsion energies. In the present work we investigate the extent to which DNA ejection is incomplete at zero osmotic external pressure when phage is opened with its receptor in vitro. The DNA fragment remaining in the capsid and the tail that is no longer bent or compressed -and hence for which there is no internal driving force for ejection- is shown not to be ejected. We also demonstrate that DNA can be "pulled" out from the capsid by DNase I acting as a DNA binding protein or spermine acting as a DNA condensing agent. In particular, cryo electron microscopy and gel electrophoresis experiments show the following: (i) DNA ejection from bacteriophage lambda incubated in vitro with its receptor is incomplete at zero external osmotic force, with several persistence lengths of DNA remaining inside the phage capsid, if no nuclease (DNase I) or DNA condensing agent (spermine) is present in the host solution; (ii) in the presence of both DNase I and spermine in the host solution, 60% (approximately 29 kbp) of wild-type lambda DNA (48.5 kbp) remains unejected inside the phage capsid, in the form of an unconstrained toroidal condensate; (iii) with DNase I added, but no spermine, the ejection is complete; (iv) with spermine, but without DNase I added, all the DNA is again ejected, and organized as a toroidal condensate outside.

Viral capsids: mechanical characteristics, genome packaging and delivery mechanisms

The main functions of viral capsids are to protect, transport and deliver their genome. The mechanical properties of capsids are supposed to be adapted to these tasks. Bacteriophage capsids also need to withstand the high pressures the DNA is exerting onto it as a result of the DNA packaging and its consequent confinement within the capsid. It is proposed that this pressure helps driving the genome into the host, but other mechanisms also seem to play an important role in ejection. DNA packaging and ejection strategies are obviously dependent on the mechanical properties of the capsid. This review focuses on the mechanical properties of viral capsids in general and the elucidation of the biophysical aspects of genome packaging mechanisms and genome delivery processes of double-stranded DNA bacteriophages in particular.

Is phage DNA 'injected' into cells--biologists and physicists can agree

The double-stranded DNA inside bacteriophages is packaged at a density of approximately 500 mg/ml and exerts an osmotic pressure of tens of atmospheres. This pressure is commonly assumed to cause genome ejection during infection. Indeed, by the addition of their natural receptors, some phages can be induced in vitro to completely expel their genome from the virion. However, the osmotic pressure of the bacterial cytoplasm exerts an opposing force, making it impossible for the pressure of packaged DNA to cause complete genome ejection in vivo. Various processes for complete genome ejection are discussed, but we focus on a novel proposal suggesting that the osmotic gradient between the extracellular environment and the cytoplasm results in fluid flow through the phage virion at the initiation of infection. The phage genome is thereby sucked into the cell by hydrodynamic drag.

A kinetic analysis of DNA ejection from tailed phages revealing the prerequisite activation energy

All tailed bacteriophages follow the same general scheme of infection: they bind to their specific host receptor and then transfer their genome into the bacterium. DNA translocation is thought to be initiated by the strong pressure due to DNA packing inside the capsid. However, the exact mechanism by which each phage controls its DNA ejection remains unknown. Using light scattering, we analyzed the kinetics of in vitro DNA release from phages SPP1 and lambda (Siphoviridae family) and found a simple exponential decay. The ejection characteristic time was studied as a function of the temperature and found to follow an Arrhenius law, allowing us to determine the activation energy that governs DNA ejection. A value of 25-30 kcal/mol is obtained for SPP1 and lambda, comparable to the one measured in vitro for T5 (Siphoviridae) and in vivo for T7 (Podoviridae). This suggests similar mechanisms of DNA ejection control. In all tailed phages, the opening of the connector-tail channel is needed for DNA release and could constitute the limiting step. The common value of the activation energy likely reflects the existence for all phages of an optimum value, ensuring a compromise between efficient DNA delivery and high stability of the virus.

Dynamic and static light scattering analysis of DNA ejection from the phage lambda

With the aid of time-resolved dynamic light scattering (DLS) and static light scattering (SLS), we have analyzed the ejection kinetics from the bacterial virus bacteriophage (or phage) lambda , triggered in vitro by its receptor. We have used DLS to investigate the kinetics in such a system. Furthermore, we have shown that both SLS and DLS can be interchangeably used to study the process of phage DNA release. DLS is superior to SLS in that it also allows the change in the light scattering arising from each of the components in the system to be monitored under conditions such that the relaxation times are separable. With help of these two methods we present a model explaining the reason for the observed decrease in the scattering intensity accompanying DNA ejection from phage. We emphasize that ejection from phage capsid occurs through a very long tail (which is nearly three times longer than the capsid diameter), which significantly separates ejected DNA from the scattering volume of the capsid. The scattering intensity recorded during the DNA ejection process is the result of a change in the form factor of the phage particle, i.e., the change in the interference effects between the phage capsid and the DNA confined in the phage particle. When the DNA molecule is completely ejected it remains in the proximity of the phage for some time, thus contributing to the scattering signal as it diffuses away from the phage capsid, into the scattering volume and returns to its unperturbed chain conformation in bulk solution. The free DNA chain does not contribute to the scattered intensity, when measured at a large angle, due to the DNA form factor and the low concentration. Although the final diffusion-controlled step can lead to overestimation of the real ejection time, we can still use both scattering methods to estimate the initial DNA ejection rates, which are mainly dependent on the pressure-driven DNA ejection from the phage, allowing studies of the effects of various parameters affecting the ejection.

Ionic effects on viral DNA packaging and portal motor function in bacteriophage phi 29

In many viruses, DNA is confined at such high density that its bending rigidity and electrostatic self-repulsion present a strong energy barrier in viral assembly. Therefore, a powerful molecular motor is needed to package the DNA into the viral capsid. Here, we investigate the role of electrostatic repulsion on single DNA packaging dynamics in bacteriophage phi 29 via optical tweezers measurements. We show that ionic screening strongly affects the packing forces, confirming the importance of electrostatic repulsion. Separately, we find that ions affect the motor function. We separate these effects through constant force measurements and velocity versus load measurements at both low and high capsid filling. Regarding motor function, we find that eliminating free Mg(2+) blocks initiation of packaging. In contrast, Na(+) is not required, but it increases the motor velocity by up to 50% at low load. Regarding internal resistance, we find that the internal force was lowest when Mg(2+) was the dominant ion or with the addition of 1 mM Co(3+). Forces resisting DNA confinement were up to approximately 80% higher with Na(+) as the dominant counterion, and only approximately 90% of the genome length could be packaged in this condition. The observed trend of the packing forces is in accord with that predicted by DNA charge-screening theory. However, the forces are up to six times higher than predicted by models that assume coaxial spooling of the DNA and interaction potentials derived from DNA condensation experiments. The forces are also severalfold higher than ejection forces measured with bacteriophage lambda.

Biological consequences of tightly bent DNA: the other life of a macromolecular celebrity

The mechanical properties of DNA play a critical role in many biological functions. For example, DNA packing in viruses involves confining the viral genome in a volume (the viral capsid) with dimensions that are comparable to the DNA persistence length. Similarly, eukaryotic DNA is packed in DNA-protein complexes (nucleosomes), in which DNA is tightly bent around protein spools. DNA is also tightly bent by many proteins that regulate transcription, resulting in a variation in gene expression that is amenable to quantitative analysis. In these cases, DNA loops are formed with lengths that are comparable to or smaller than the DNA persistence length. The aim of this review is to describe the physical forces associated with tightly bent DNA in all of these settings and to explore the biological consequences of such bending, as increasingly accessible by single-molecule techniques.

Binding of Intercalating and Groove-Binding Cyanine Dyes to Bacteriophage T5

The interaction between four related cyanine dyes and bacteriophage T5 is investigated with fluorescence and absorption spectroscopy. The dyes, which differ in size, charge, and mode of DNA-binding, penetrate the capsid and bind the DNA inside. The rate of association decreases progressively with increasing dye size, from a few minutes for YO to more than 50 h for YOYO (at 37 degrees C). The relative affinity for the phage DNA is a factor of about 0.2 lower than for the same T5-DNA when free in solution. Comparison of groove-bound BOXTO-PRO and intercalating YO-PRO shows that the reduced affinity is not due to DNA extension but perhaps influenced by competition with other cationic DNA-binding agents inside the capsid. Although, the extent of dye binding to the phages decreases with increasing external ionic strength, the affinity relative to free DNA increases, which indicates a comparatively weak screening of electrostatic interactions inside the phage. The rate of binding increases with increasing ionic strength, reflecting an increase in effective pore size of the capsid as electrostatic interactions are screened and/or a faster diffusion of the dye through the DNA matrix inside the capsid as the DNA affinity is reduced. A combination of electron microscopy, light scattering, and linear dichroism show that the phages are intact after YO-PRO binding, whereas a small degree of capsid rupture cannot be excluded with BOXTO-PRO.

Polymer packaging and ejection in viral capsids: shape matters

We use a mesoscale simulation approach to explore the impact of different capsid geometries on the packaging and ejection dynamics of polymers of different flexibility. We find that both packing and ejection times are faster for flexible polymers. For such polymers a sphere packs more quickly and ejects more slowly than an ellipsoid. For semiflexible polymers, however, the case relevant to DNA, a sphere both packs and ejects more easily. We interpret our results by considering both the thermodynamics and the relaxational dynamics of the polymers. The predictions could be tested with biomimetic experiments with synthetic polymers inside artificial vesicles. Our results suggest that phages may have evolved to be roughly spherical in shape to optimize the speed of genome ejection, which is the first stage in infection.

The Ectodomain of the Viral Receptor YueB Forms a Fiber That Triggers Ejection of Bacteriophage SPP1 DNA

The irreversible binding of bacteriophages to their receptor(s) in the host cell surface triggers release of the naked genome from the virion followed by transit of viral DNA to the host cell cytoplasm. We have purified, for the first time, a receptor from a Gram-positive bacterium that is active to trigger viral DNA ejection in vitro. This extracellular region ("ectodomain") of the Bacillus subtilis protein YueB (YueB780) was a 7 S elongated dimer forming a 36.5-nm-long fiber. YueB780 bound to the tail tip of bacteriophage SPP1. Although a stable receptor-phage interaction occurred between 0 and 37 degrees C, complete blocking of phage DNA release or partial ejection events were observed at temperatures below 15 degrees C. We also showed that the receptor was exposed to the B. subtilis surface. YueB differed structurally from phage receptors from Gram-negative bacteria. Its properties revealed a fiber spanning the full length of the 30-nm-thick peptidoglycan layer. The fiber is predicted to be anchored in the cell membrane through transmembrane segments. These features, highly suitable for a virus receptor in Gram-positive bacteria, are very likely shared by a large number of phage receptors.

The effect of genome length on ejection forces in bacteriophage lambda

A variety of viruses tightly pack their genetic material into protein capsids that are barely large enough to enclose the genome. In particular, in bacteriophages, forces as high as 60 pN are encountered during packaging and ejection, produced by DNA bending elasticity and self-interactions. The high forces are believed to be important for the ejection process, though the extent of their involvement is not yet clear. As a result, there is a need for quantitative models and experiments that reveal the nature of the forces relevant to DNA ejection. Here, we report measurements of the ejection forces for two different mutants of bacteriophage lambda, lambdab221cI26 and lambdacI60, which differ in genome length by approximately 30%. As expected for a force-driven ejection mechanism, the osmotic pressure at which DNA release is completely inhibited varies with the genome length: we find inhibition pressures of 15 atm and 25 atm, for the short and long genomes, respectively, values that are in agreement with our theoretical calculations.

Fifty-three years since Hershey and Chase; much ado about pressure but which pressure is it?

The events that occur at the initiation of phage infection are discussed, from adsorption through DNA ejection from the virion into the cell. A new model for DNA translocation is described that not only overcomes difficulties associated with previous models of DNA ejection but also provides a mechanism by which both single-stranded genomes and internal phage proteins can be transported from the virion into the cell cytoplasm.

Encapsidation and transfer of phage DNA into host cells: from in vivo to single particles studies

A remarkable property of bacteriophages is their capacity to encapsidate large amounts of DNA during morphogenesis and to maintain their genome in the capsid in a very stable form even under extreme conditions. Even as remarkable is the efficiency with which their genome is ejected from the phage particle and transferred into the host bacteria. Biophysical techniques have led to significant progresses in characterizing these mechanisms. The molecular motor of encapsidation of several phages as well as the organization of viral capsids have been described at atomic resolution. Cryo-electron microscopy and fluorescence microscopy have permitted to describe DNA ejection at the level of single phage particles. Theoretical models of encapsidation and ejection have been proposed that can be confronted to experimental data. This review will present the state of the art on the recent advances brought by biophysics in this field. Reference will be given to the work performed on double-stranded DNA phages and on one of its representative, phage T5, our working model.

Effect of spermine and DNase on DNA release from bacteriophage T5

Bacterial viruses (bacteriophages) consist of nucleic acid protected by a protein envelope called capsid. At the start of infection, the phage genome is translocated into the bacterial cytoplasm. In vitro (and also in vivo), this DNA release can be triggered by binding a specific receptor protein to the phage tail. The force responsible for the release arises from energy stored in the capsid due to strong confinement of the DNA. We show that this force can be modified by adding molecules like spermine that affect DNA conformation. The tetravalent cation spermine can reduce the pressure inside the capsid and induce condensation of the released DNA. We examine the effect of spermine on DNA ejection from phage T5 by using light scattering and gel electrophoresis to measure the amount of DNA remaining in the capsid at the end of ejection. We discuss the results in terms of free energy minimization and we demonstrate that the presence of a DNA condensate outside the phage generates an additional force pulling passively on the DNA remaining inside the capsid.

DNA ejection from bacteriophage T5: analysis of the kinetics and energetics

DNA ejection from bacteriophage T5 can be passively driven in vitro by the interaction with its specific host receptor. Light scattering was used to determine the physical parameters associated with this process. By studying the ejection kinetics at different temperatures, we demonstrate that an activation energy of the order of 70 k(B)T must be overcome to allow the complete DNA ejection. A complex shape of the kinetics was found whatever the temperature. This shape may be actually understood using a phenomenological model based on a multistep process. Passing from one stage to another requires the mentioned thermal activation of pressurized DNA inside the capsids. Both effects contribute to shorten or to lengthen the pause time between the different stages explaining why the T5 DNA ejection is so slow compared to other types of phage.