Preparation and optimization of Pickering emulsion stabilized by chitosan-tripolyphosphate nanoparticles for curcumin encapsulation

Recent Advances on Pickering Emulsions Stabilized by Diverse Edible Particles: Stability Mechanism and Applications

Pickering emulsions, which are stabilized by particles, have gained considerable attention recently because of their extreme stability and functionality. A food-grade particle is preferred by the food or pharmaceutical industries because of their noteworthy natural benefits (renewable resources, ease of preparation, excellent biocompatibility, and unique interfacial properties). Different edible particles are reported by recent publications with distinct shapes resulting from the inherent properties of raw materials and fabrication methods. Furthermore, they possess distinct interfacial properties and functionalities. Therefore, this review provides a comprehensive overview of the recent advances in the stabilization of Pickering emulsions using diverse food-grade particles, as well as their possible applications in the food industry.

Preparation and Characterization of Food-Grade Pickering Emulsions Stabilized with Chitosan-Phytic Acid-Cyclodextrin Nanoparticles

This study aimed to fabricate food-grade Pickering emulsions stabilized by chitosan-phytic acid-β-cyclodextrin (CS-PA-CD) nanoparticles. The CS-PA-CD nanoparticles were characterized with FITR, XRD, and TGA to prove its successfully crosslinking, then characterized by DLS system and scanning electron microscopy showing the smallest average particle size was 434.2 ± 2.5 nm and it increased with the ratio of PA-CD to CS increasing. Pickering emulsions stabilized by CS-PA-CD nanoparticles was prepared and it showed the best stability at around pH 6. The particle concentration higher than 1.0% (w/v) and the oil fraction above 0.5% (v/v) could reach the emulsion stability. In addition, the Pickering emulsions were stable at various temperature (30–70 °C) and influenced by the certain change of ionic strength (0–500 mM). These CS-PA-CD Pickering emulsions showed great application in the formation of functional foods and pharmaceutical industries.

A green initiative for oiled sand cleanup using chitosan/rhamnolipid complex dispersion with pH-stimulus response

The released oil can affect the vulnerable shoreline environment if the oil spills happen in coastal waters. The stranded oil on shorelines is persistent, posing a long-term influence on the intertidal ecosystem after weathering. Therefore, shoreline cleanup techniques are required to remove the oil from the shoreline environment. In this study, a new shoreline cleanup initiative using chitosan/rhamnolipid (CS/RL) complex dispersion with pH-stimulus response was developed for oiled sand cleanup. The results of factorial and single-factor design revealed that the CS/RL complex dispersion maintained high removal efficiency for oiled sand with different levels of oil content in comparison to using rhamnolipid alone. However, the increase of salinity negatively affected the removal efficiency. The electrostatic screening effect of high ionic strength can hinder the formation of the CS/RL complex, and thus reduce removal efficiency. The pH-responsive characteristic of chitosan allows the easy separation of water and oil in washing effluent. The chitosan polyelectrolytes aggregated and precipitated due to the deprotonation of amino groups by adjusting the pH of the washing effluent to above 8. The microscope image demonstrated that the chitosan aggregates wrapped around the oil droplets and settled to the bottom together, thus achieving oil-water separation. Such pH-stimulus response may help achieve an easy oil-water separation after washing. These findings have important implications for developing the new strategies of oil spill response.

Progress in Colloid Delivery Systems for Protection and Delivery of Phenolic Bioactive Compounds: Two Study Cases-Hydroxytyrosol and Curcumin

Insufficient intake of beneficial food components into the human body is a major issue for many people. Among the strategies proposed to overcome this complication, colloid systems have been proven to offer successful solutions in many cases. The scientific community agrees that the production of colloid delivery systems is a good way to adequately protect and deliver nutritional components. In this review, we present the recent advances on bioactive phenolic compounds delivery mediated by colloid systems. As we are aware that this field is constantly evolving, we have focused our attention on the progress made in recent years in this specific field. To achieve this goal, structural and dynamic aspects of different colloid delivery systems, and the various interactions with two bioactive constituents, are presented and discussed. The choice of the appropriate delivery system for a given molecule depends on whether the drug is incorporated in an aqueous or hydrophobic environment. With this in mind, the aim of this evaluation was focused on two case studies, one representative of hydrophobic phenolic compounds and the other of hydrophilic ones. In particular, hydroxytyrosol was selected as a bioactive phenol with a hydrophilic character, while curcumin was selected as typical representative hydrophobic molecules.

Active Bionanocomposite Coating Quality Assessments of Some Cucumber Properties with Some Diverse Applications during Storage Condition by Chitosan, Nano Titanium Oxide Crystals, and Sodium Tripolyphosphate

Cucumbers have a short shelf-life of about 14 days, they are perishable due to the high moisture content. This study aimed to study the effects of nano-coating material such as titanium nanoparticles and chitosan with the addition of sodium tripolyphosphate as a crosslinker to enhance cucumber quality during storage. Some essential physical, chemical, and biological parameters were determined. CH-Nano-ST (chitosan/nano titanium oxide crystals/sodium tripolyphosphate) retained the maximum greenness, −7.99, compared to CH-Nano samples, which recorded −7.31. CH-Nano (chitosan/nano titanium oxide crystals) remained the lightest, 44.38, and CH-Nano-ST was a little darker (43.73) compared to the others treatments. The discoloration was extra severe with control (22.30), which started to spoil after the end of the first week. After 21 days of the storage period at 10 °C, the reducing sugars content reduced to reach −0.64 g/100 g and −0.21 g/100 g for CH-Nano and CH-Nano-ST treatments, respectively. The CH-Nano-ST treatment presented a lower value of toughness, followed by CH-Nano at the end of the storage period. Moreover, the highest crispness index was detected for CH-Nano (5.12%), while CH-Nano-ST treatment had a slight decline to reach 4.92%. The biological results indicated that CH-Nano-ST treatment can be applied to delay the microbial contamination of Salmonella spp. in cucumbers as it reached 0.94 log CFU/g, while the CH-Nano treatment reached 1.09 log CFU/g, at the end of the storage period. In summary, nano-coating treatments with the addition of sodium tripolyphosphate can be applied to regulator postharvest quality measurements of the biological activities in cucumbers during storage at 10 °C until 21 days.

Highly Soluble and Stable, High Release Rate Nanocellulose Codrug Delivery System of Curcumin and AuNPs for Dual Chemo-Photothermal Therapy

As a natural antitumor drug, curcumin (CUR) has received increasing attention from researchers and patients due to its various medicinal properties. However, currently CUR is still restricted due to its low and stand-alone therapeutic effects that seriously limit its clinical application. Here, by using cellulose nanocrystals (CNCs) as a nanocarrier to load CUR and AuNPs simultaneously, we developed a hybrid nanoparticle as a codrug delivery system to enhance the low and stand-alone therapeutic effects of CUR. Aided with the encapsulation of β-cyclodextrin (βCD), both the solubility and the stability of CUR are greatly enhanced (solubility increased from 0.89 to 131.7 μg/mL). Owing to the unique rod-like morphology of CNCs, the system exhibits an outstanding loading capacity of 31.4 μg/mg. Under the heat effects of coloaded AuNPs, the system demonstrates a high release rate of 77.63%. Finally, with CNC as a bridge nanocarrier, all aforementioned functions were integrated into one hybrid nanoparticle. The all-in-one integration ensures CUR to have enhanced therapeutic effects and enables the delivery system to exhibit combined chemo-photothermal therapy outcomes. This work presents a significant step toward CUR's clinical application and provides a new strategy for effective and integrative treatment of tumor disease.

Enhancement of oil productivity of Mortierella alpine and investigation into the potential of Pickering oil-in-water emulsions to improve its oxidative stability

Mortierella alpine is an oleaginous fungi known for its tendency to produce oil and polyunsaturated fatty acid. Initial experiment indicated that magnesium oxide nanoparticles (MgONPs) accelerated glucose consumption and, consequently, oil production. After enhancement of Mortierella alpine CBS 754.68' oil production, the oxidative stability of the oil rich in long-chain polyunsaturated fatty acids (arachidonic acid) encapsulated by modified chitosan (CS) was assayed. To confirm the modification of CS, Fourier transform infrared spectroscopy (FTIR) spectrum indicated that the connection between CS and capric acid (CA) as well as stearic acid (SA) was well formed, leading to a considerable improvement in nanoparticle formation, measured by the SEM photographs, and physical and oxidative stability of emulsions. The oxidative stability of Mortierella alpine' oil emulsion in a period of 20 days at ambient temperature was monitored. Of all treated media, CS-SA nanoparticles were of the most oxidative stability. The rheological tests showed that viscosity behaviors were dominated by elastic behaviors in the impregnating emulsion with unmodified CS at the applied frequencies, and the elastic behavior of the emulsion sample prepared with CS-SA was slightly higher than that of the emulsion prepared with CS-CA. The results of redispersibility indicated that the powdered emulsion stabilized by CS-SA had the lowest water absorption.

Curcumin, a potent therapeutic nutraceutical and its enhanced delivery and bioaccessibility by pickering emulsions

Curcumin is a biomolecule with functional moieties, which contribute to its anti-inflammatory, anticancer, and antioxidant properties. It has shown several therapeutic effects on treating inflammatory and neurodegenerative diseases and contributes to the reduction of oxidative stress and damage to body tissues. However, its low solubility and fast metabolism limit its absorption in the gastrointestinal (GI) tract and lead to its low bioavailability. Preparation of Pickering emulsions stabilized with mineral or biopolymer-based nanoparticles can be an effective strategy for enhancing the stability of curcumin against degradation, increasing its bioaccessibility in the GI tract, and achieving its controlled release at various locations based on changes in environmental conditions. Various nanoparticles prepared from minerals, proteins, and polysaccharides show potential for stabilizing the curcumin-loaded emulsions, and their wettability can be altered through complexation and formation of hybrid nanoparticles. Stabilization of Pickering emulsions with polysaccharide-based nanoparticles and their complexes can enhance the stability of the curcumin against degradation. Moreover, various protein-based nanoparticles and their conjugated forms with other proteins or polysaccharides can enable the preparation of high internal phase Pickering emulsions (HIPEs) with concomitant higher loading and bioaccessibility of the curcumin molecule. In light of the several therapeutic properties of curcumin, this review article aims to highlight recent studies and the strategies used for the preparation of curcumin Pickering emulsions stabilized by various nanoparticles for enhancing its bioaccessibility during metabolism. These may be useful in pharmaceutical and food industries for drug development and delivery and fortification of food products with this nutraceutical component.

Fabrication, stability and rheological properties of zein/chitosan particles stabilized Pickering emulsions with antioxidant activities of the encapsulated vit-D3

Pickering emulsions have been known to be promising candidates for encapsulating and delivering a wide range of bioactive compounds with antioxidant potentials. In this work, we formulated and characterized zein (ZN)/chitosan (CS) stabilized Pickering emulsion. The prepared emulsions were firstly characterized by droplet size after preparation and after storage for one month at room temperature as well as after the addition of prebiotic gum Arabic (GA). Rheological measurements were further carried out to see the behavior and stability of these emulsions after storage. Thereafter, vit-D₃ was encapsulated, and the antioxidant activity of the emulsions system were evaluated. The results showed that no significant change in the mean droplet diameter of the emulsions was observed after storage for a month. This claim was further confirmed by their rheological measurements particularly, the emulsions prepared with ZN/CS ratio of 1:2 having 50% oil contents exhibited significant stability. GA addition caused a gradual increase in the droplet size up to some level, after which it led to complete destabilization of the emulsion. Finally, to protect and deliver, vit-D₃ was successfully loaded in these emulsions. No significant difference in the DPPH radical scavenging activity of the vit-D₃ encapsulated emulsions was observed, showing their capability as delivery vehicles irrespective of their composition.

High antibacterial performance of hydrophobic chitosan-based nanoparticles loaded with Carvacrol

Bacterial infections have become one of the top ten public health concerns worldwide. These problems are aggravated with the emergence of multi-drug resistant bacterial strains. Thus, it is necessary to adopt novel technological strategies, such as development of bionanomaterials to prevent the infection, and treat this kind of bacteria. At this regard, the chemical modification of chitosan (Cs), by the covalent attachment of a hydrocarbon chain (octanoic acid), was developed to obtain hydrophobic chitosan (HCs). Then, HCs was used to synthetize nanoparticles using the well-known ionotropic gelation approach, optimizing the parameters, such as the TPP/HCs ratio and pH solution to get stable nanoparticles. Then, carvacrol (CAR) was loaded into NPs (HCs-CAR NPs) using different concentrations of 25%, 50% and 75% (%w/w CAR/HCs). The physicochemical properties for HCs-CAR NPs prepared at 50% of CAR stood out from the rest, showing a spherical morphology, with a size of 200 nm, Z potential of 10.4 mV and encapsulation efficiency of 56.28%. These formulations were chosen to evaluate the antibacterial activity, using Gram-negative (Escherichia coli) and Gram-positive bacterial model (Staphylococcus aureus). The HCs-CAR NPs showed great activity against both bacterial models, being more effective against Gram (+) strain (S. aureus), suggesting the potential application of these NPs as novel biomaterial to treat bacterial infection.

Evaluating the coating process of titanium dioxide nanoparticles and sodium tripolyphosphate on cucumbers under chilling condition to extend the shelf-life

Cucumber is a highly perishable fruit, that can easily suffer from water loss, condensation, shriveling, yellowing and decay. The present investigation aim was to extending the shelf-life of cucumber using eco-friendly sodium tripolyphosphate and nano-material. Decay; hardness; succinate dehydrogenase activity (SDH); condensation and shriveling rates; and visual quality assessments of cucumbers fruits were evaluated during 21 days of storage period at 10 °C. There was a slight incidence of decay among (Chitosan/Titanium Dioxide Nanoparticles) CS-TiO₂ and (Chitosan/Titanium Dioxide Nanoparticles/Sodium Tripolyphosphate) CS-TiO₂-STP samples, which reported the lowest decay incidence 2.21% in CS-TiO₂, while CS-TiO₂-STP did not show any decay at end of storage period. CS-TiO₂-STP recorded the lowest value in SDH activity 0.08 ∆OD min⁻¹ mg protein⁻¹. Very slight hardness, water condensation, and shriveling were detected in CS-TiO₂ samples, while CS-TiO₂-STP was the lowest compared with other SC samples and control. In general, CS-TiO₂-STP treatment was found most potential to enhance the postharvest shelf life of cucumber throughout the storage period up to 21 day.

Formulation and characterization of zein/chitosan complex particles stabilized Pickering emulsion with the encapsulation and delivery of vitamin D3

BACKGROUND

Pickering emulsions (PEs) which are stabilized by solid particles instead of surfactants have recently attracted tremendous attentions due to their non-toxic and long-term stable nature. In the current study, we fabricated and characterized zein (ZN)/chitosan (CS) complex particles (ZNCSPs) stabilized PE for the encapsulation and delivery of vitamin D₃ .

RESULTS

The ZNCSPs were synthesized with different ratios, i.e. 1:1, 1:1.5 and 1:2 to investigate the optimum ratio. Transmission electron microscopy observations showed the spherical nature with smooth surface of the obtained particles in the case of ZNCS ratio 1:1.5 and 1:2. Furthermore, ζ-potential values for the these particles were 32.53 ± 1.3 and 52.86 ± 0.68 mV respectively, indicating particles with (1:2) being more stable than 1:1.5. Thereafter, using these particles, the PEs were successfully formulated with different oil (medium chain triglyceride) fractions (330, 500 and 660 g kg^-1 ). The emulsions were evaluated for stability during storage and against different environmental factors including pH, temperature and ionic strength on the creaming indices (CIs) of these emulsions. The results demonstrated that the PEs with oil fractions 330 and 500 g kg^-1 exhibited significant stability during storage, particularly the ones with 500 g kg^-1 oil fractions which were stable against all the tested parameters. Finally, the prepared PEs were evaluated as efficient delivery system by encapsulating and delivering vitamin D₃ . In vitro drug release profile confirmed sustained and controlled release of the encapsulated vitamin D₃ .

CONCLUSION

Overall, our findings suggest that ZNCSPs can be promising stabilizers for stable PEs that can be used as potential delivery systems in food, cosmetic and pharmaceutical industries. © 2021 Society of Chemical Industry.

Recent progress on Pickering emulsions stabilized by polysaccharides-based micro/nanoparticles

Pickering emulsions stabilized by micro/nanoparticles have attracted considerable attention owing to their great potential in various applications ranging from cosmetic and food industries to catalysis, tissue engineering and drug delivery. There is a growing demand to design "green" micro/nanoparticles for constructing stable Pickering emulsions. Micro/nanoparticles derived from the naturally occurring polysaccharides including cellulose, chitin, chitosan and starch are capable of assembling at oil/water interfaces and are promising green candidates because of their excellent biodegradability and renewability. The physicochemical properties of the micro/nanoparticles, which are determined by the fabricating approaches and/or post-modification methods, have a significant effect on the characteristics of the final Pickering emulsions and their applications. Herein, recent advances on Pickering emulsions stabilized by polysaccharides-based micro/nanoparticles and the construction of functional materials including porous foams, microcapsules and latex particles from these emulsions as templates, are reviewed. In particular, the effects of micro/nanoparticles properties on the characteristics of the Pickering emulsions and their applications are discussed. Furthermore, the obstacles that hinder the practical applications of polysaccharides-based micro/nanoparticles and Pickering emulsions as well as the prospects for the future development, are discussed.

Recent progress in the preparation, chemical interactions and applications of biocompatible polysaccharide-protein nanogel carriers

Nanogel carriers are rapidly emerged as a major delivery strategy in the fields of food, biology and medicine for small particle size, excellent solubility, high loading, and controlled release. Natural polysaccharides and proteins are selected for the preparation of biocompatible, biodegradable, low toxic, and less immunogenic nanogels. Different polysaccharides and proteins form complex nanogels through different interaction forces (e.g., electrostatic interaction and hydrophobic interaction). The present review pursues three aims: 1) to introduce several well-known dietary polysaccharides (chitosan, dextran and alginate) and proteins (whey protein and lysozyme); 2) to discuss the types, preparation methods, chemical interactions and properties of various biocompatible complex carriers; 3) to present the application and prospect of polysaccharide-protein complex in bioactive ingredient delivery, nutrient encapsulation and flavor protection. We expect that the integration with nano-intelligent technology will improve the functional ingredient loading, recognition specificity and controlled release capabilities of polysaccharide-protein nanocomposites to generate new intelligent nanogels in the field of food industry in the future.

Opening a new gateway towards the applications of chitosan nanoparticles stabilized Pickering emulsion in the realm of aquaculture

In the current study, we synthesized eugenol (EU) based Pickering emulsion (PE) stabilized by food grade ingredients such as chitosan (CS) and tripolyphosphate (TPP) not only to enhance water miscibility of EU but also to decrease stress and damage to the immune system of fish due to anesthetic procedures. The formulated EUPEs were characterized in terms of droplet size, size distribution and the effects of environmental conditions e.g. pH and temperature on the behavior of the EUPEs. The results showed that EU PEs with 5% EU had smaller size with uniform distribution and were stable in the range of pH 5-7.5 and temperature 30-80 °C. The anesthetic effect of the EUPE was investigated by taking Common carp as a sample species. Interestingly, it was found that the induction time to anesthesia and recovery for the fish that received the PE was significantly shorter than that received EU at the same eugenol concentration (50 ppm). Most importantly, the improved hematological and bio-chemical parameters in the PE group further confirmed the immuno-protective and stress control efficacy of the PE. The results of this study propose a novel useful and potential application of PE in fishery where sedation is needed.

The microstructure and physiochemical stability of Pickering emulsions stabilized by chitosan particles coating with sodium alginate: Influence of the ratio between chitosan and sodium alginate

The purpose of this study was to further improve the physiochemical stability of the chitosan (CS) particle-stabilized Pickering emulsion by coating with sodium alginate (SA). The effect of different mass ratios of CS and SA (1:0.5-1:2) on the microstructure, rheology and the stability of the emulsions were comprehensively evaluated by various methods such as optical microscope, scanning electron microscope, rheometer, and low-field nuclear magnetism. The multilayer emulsion with low content of SA (CS:SA = 1:0.5) presented bridging flocculation. If SA concentration was high (CS:SA = 1:1-1:2), the surface of the Pickering emulsion droplets was completely covered by the SA. At this time, multilayer emulsion droplets became stable due to strong electrostatic and/or steric repulsion. Too high SA concentration (CS:GA = 1:2) might also promote the accumulation of moisture. In addition, the CS/SA multilayer emulsion showed higher coalescence stability under different environmental treatments but its creaming stability and flocculation stability were still sensitive to pH (2, 4 and 10), temperature (4 °C and 80 °C) and ionic strength (300-500 mM). In all, the addition of the proper level SA (CS:GA = 1:1-1:2) could increase the stability of CS particle-stabilized Pickering emulsion.

Curcumin encapsulation in Pickering emulsions co-stabilized by starch nanoparticles and chitin nanofibers

This study examined the stability and release of curcumin encapsulated in Pickering emulsions stabilized by starch nanoparticles and chitin nanofibers under different conditions. Curcumin stability under UV exposure and the release of curcumin from Pickering emulsions in excess water were evaluated over 24 h; while the storage stability of curcumin was assessed over 16 d. The amount of curcumin remaining in the emulsions was quantified spectrophotometrically to characterize its stability and kinetics of release. The progress of lipid oxidation was also monitored by determining peroxide (PV) and p-anisidine (AV) values. The results of passive release measurements indicated over 60% of curcumin was retained after 24 h. SNP/ChF-stabilized Pickering emulsions showed approximately 50% and 45% of curcumin retention upon 16 d of storage and under UV exposure, respectively. Moreover, significant improvement in the curcumin retention was found when higher concentrations of both solid nanoparticles were used. The degradation kinetics of curcumin over storage time and under UV exposure were found to follow first order kinetics. When both emulsifiers were doubled (C4S2), shelf-life was extended to longer than 60 d (AV < 10). This study provides a promising approach to protect encapsulated curcumin, which could potentially be used in functional food products with extended shelf-life.

Sustainable preparation of bifunctional cellulose nanocrystals via mixed H2SO4/formic acid hydrolysis

In this work, a sustainable and highly efficient approach for preparing bifunctional cellulose nanocrystals (CNCs) was proposed through a mixed acid system of sulfuric acid and formic acid (FA). It was found that low-concentration (5-10 wt%) sulfuric acid can significantly improve the hydrolysis efficiency of FA (65-80 wt%), which enabled the highly efficient preparation of CNCs, i.e., the maximum yield of CNCs reached up to 70.65%. The obtained CNCs exhibited a rod-like shape with high crystallinity, and good dispersibility in both water and some organic phases. Moreover, the as-prepared CNCs exhibited high thermal stability, which is much higher than that of the traditionally sulfuric acid hydrolyzed ones. In addition, it was demonstrated that the bifunctional CNCs were able to stabilize various oils to form stable Pickering emulsion gels. Thus, this work provides a promising approach for sustainable preparation of bifunctional CNCs, which may find high-end applications in diverse fields.

Application of Advanced Emulsion Technology in the Food Industry: A Review and Critical Evaluation

The food industry is one of the major users of emulsion technology, as many food products exist in an emulsified form, including many dressings, sauces, spreads, dips, creams, and beverages. Recently, there has been an interest in improving the healthiness, sustainability, and safety of foods in an attempt to address some of the negative effects associated with the modern food supply, such as rising chronic diseases, environmental damage, and food safety concerns. Advanced emulsion technologies can be used to address many of these concerns. In this review article, recent studies on the development and utilization of these advanced technologies are critically assessed, including nanoemulsions, high internal phase emulsions (HIPEs), Pickering emulsions, multilayer emulsions, solid lipid nanoparticles (SLNs), multiple emulsions, and emulgels. A brief description of each type of emulsion is given, then their formation and properties are described, and finally their potential applications in the food industry are presented. Special emphasis is given to the utilization of these advanced technologies for the delivery of bioactive compounds.

Ameliorating quercetin constraints in cancer therapy with pH-responsive agarose-polyvinylpyrrolidone -hydroxyapatite nanocomposite encapsulated in double nanoemulsion

Despite quercetin (QC) promising features for cancer therapy, low solubility, poor permeability, and short biological half-life time significantly confine its application in cancer therapy. In this study, a novel approach is developed to improve loading efficiency and attain quercetin sustained-release concurrently. In this direction, hydrogel nanocomposite of agarose (AG)-polyvinylpyrrolidone (PVP)-hydroxyapatite (HAp) was loaded with QC. Incorporating HAp nanoparticles in the AG-PVP hydrogel improved the loading efficiency up to 61%. Also, the interactions between nanoparticle, drug, and hydrogel polymers rendered the nanocomposite pH-responsive at acidic conditions and controlled the burst release at neutral conditions. Then, QC-loaded hydrogel was encapsulated into the water in oil in water nanoemulsions to further sustain the drug release. As a result, the pH-responsive release of QC with prolonged-release over 96 h was observed. In more detail, according to the Korsmeyer-Peppas mathematical model, the mechanism of release was anomalous (diffusion-controlled) at pH 7.4 and anomalous transport (dissolution-controlled) at pH 5.4. The presence of all nanocomposite components was confirmed with FTIR analysis, and XRD results approved the incorporation of QC in the fabricated nanocomposite. The homogeneous surface of the nanocomposite in FESEM images showed good compatibility between components. The zeta potential analysis confirmed the good stability of the nanocarriers. Besides, the fabricated AG-PVP-HAp-QC platform showed significant cytotoxicity on MCF-7 cells compared to QC as a free drug (p < 0.001) and to quercetin-loaded AG-PVP (AG-PVP-QC) (p < 0.001) with enhanced apoptosis induction after the addition of HAp. Accordingly, this delivery platform ameliorated loading and sustained-release of QC, as well as its anticancer activity by releasing the drug at an effective therapeutic level over a long period to induce apoptosis. Thus, turning this drug delivery system into a potential candidate for further biomedical applications.

Fabrication and characterization of sunflower protein isolate nanoparticles, and their potential for encapsulation and sustainable release of curcumin

In this research, first, the effects of two desolvating agents (ethanol and methanol) at three temperature values (4, 25, and 50 °C) on the fabrication of sunflower protein isolate (SnPI) nanoparticles were studied using a desolvation method. Second, the ability of the nanoparticles to encapsulate curcumin was investigated. Results showed that ethanol led to smaller nanoparticles compared to methanol as the desolvating agent at 4 and 50 °C. However, at 25 °C, ethanol formed the most uniform nanoparticles with the lowest polydispersity index (0.188 ± 0.091) and particle size of 174.64 ± 30.61 nm. The encapsulation efficiency was in the range of 39.1 to 95.4% according to the fabrication condition and curcumin-to-protein mass ratio. A biphasic trend of curcumin release from nanoparticles was observed; in which, over 50% of curcumin was released from the curcumin-loaded nanoparticles in the first 2 h, which is attributed to the burst effect of the protein matrix.

Chitin nanofibers improve the stability and functional performance of Pickering emulsions formed from colloidal zein

There is growing interest in formulating Pickering emulsions from biopolymer particles due to consumer demand for more natural products. Protein-based colloidal particles can be used for this purpose, but they are prone to aggregate at pH values around their isoelectric point (pI), which limits their application. In this study, the possibility of using chitin nanofibers (ChNFs) to improve the pH stability of Pickering emulsions prepared from zein colloidal particles (ZCPs) was investigated. Initially, the morphology and interfacial properties of the complexes formed between ChNFs and ZCPs were studied as a function of pH (3-9). The tendency of the ZCPs to aggregate and sediment at pH ≥ pI was reduced in the presence of ChNFs, which was attributed to the formation of electrostatic complexes. The contact angle of the composite particles could be optimized by altering their composition. For instance, the contact angle increased from 74° for ZCPs to 85° for ZCP/ChNF (5:1 ratio) at pH 6, which improved their tendency to stabilize the oil droplets. Brewster angle microscopy indicated that ZCP/ChNF complexes had rod-like and/or particulate structures at an air-water interface, which were different from those observed in the bulk aqueous phase. Pickering emulsions formed from ZCP/ChNF complexes had better stability than those formed from ZCPs or ChNFs, especially when the pH was close to or greater than the pI. An in vitro digestion study showed that the presence of the interfacial complexes reduced the lipolysis of the oil droplets by about 11% in a simulated gastrointestinal tract. High internal phase Pickering emulsions (HIPPEs) could be formed from ZCP/ChNF complexes at pH ≥ pI, which were able to protect unsaturated lipids from oxidation. Overall, our results show that chitin nanofibers can be used to improve the pH stability of Pickering emulsions formed from colloidal zein, as well as to modulate their functional performance.

Magnetic-responsive Pickering emulsion and its catalytic application at the water–oil interface

Schematic diagram of interfacial catalysis reactions by MRGO–Pd Pickering emulsion.