Preparation and characterization of PEG-coated silica nanoparticles for oral insulin delivery

How to measure release from nanosized carriers?

Novel drug delivery systems exhibit great potential in the formulation of poorly soluble compounds but have also been applied to reduce side effects of highly active drug molecules. Despite all efforts, there are only few technologies available to investigate the in vitro release of next-generation nanotherapeutics. In the following, different approaches for testing the drug release from nanoparticles in the fields of formulation development and quality control will be discussed. A variety of methods is available, starting from dialysis-based equipment, in situ measurements, flow-through devices and sample and separate setups. If possible, these methods should enable a more rapid formulation development and quality control of nanosized carriers as well as improve the prediction of in vivo performance and clinical outcomes.

Biomimetic insulin-imprinted polymer nanoparticles as a potential oral drug delivery system

In this study, we investigate molecularly imprinted polymers (MIPs), which form a three-dimensional image of the region at and around the active binding sites of pharmaceutically active insulin or are analogous to b cells bound to insulin. This approach was employed to create a welldefined structure within the nanospace cavities that make up functional monomers by cross-linking. The obtained MIPs exhibited a high adsorption capacity for the target insulin, which showed a significantly higher release of insulin in solution at pH 7.4 than at pH 1.2. In vivo studies on diabetic Wistar rats showed that the fast onset within 2 h is similar to subcutaneous injection with a maximum at 4 h, giving an engaged function responsible for the duration of glucose reduction for up to 24 h. These MIPs, prepared as nanosized material, may open a new horizon for oral insulin delivery.

Novel strategies in the oral delivery of antidiabetic peptide drugs - Insulin, GLP 1 and its analogs

As diabetes is a complex disorder being a major cause of mortality and morbidity in epidemic rates, continuous research has been done on new drug types and administration routes. Up to now, a large number of therapeutic peptides have been produced to treat diabetes including insulin, glucagon-like peptide-1 (GLP-1) and its analogs. The most common route of administration of these antidiabetic peptides is parenteral. Due to several drawbacks associated with this invasive route, delivery of these antidiabetic peptides by the oral route has been a goal of pharmaceutical technology for many decades. Dosage form development should focus on overcoming the limitations facing oral peptides delivery as degradation by proteolytic enzymes and poor absorption in the gastrointestinal tract (GIT). This review focuses on currently developed strategies to improve oral bioavailability of these peptide based drugs; evaluating their advantages and limitations in addition to discussing future perspectives on oral peptides delivery. Depending on the previous reports and papers, the area of nanocarriers systems including polymeric nanoparticles, solid lipid nanoparticles, liposomes and micelles seem to be the most promising strategy that could be applied for successful oral peptides delivery; but still further potential attempts are required to be able to achieve the FDA approved oral antidiabetic peptide delivery system.

How to design the surface of peptide-loaded nanoparticles for efficient oral bioavailability?

The oral administration of proteins is a current challenge to be faced in the field of therapeutics. There is currently much interest in nanocarriers since they can enhance oral bioavailability. For lack of a clear definition, the key characteristics of nanoparticles have been highlighted. Specific surface area is one of these characteristics and represents a huge source of energy that can be used to control the biological fate of the carrier. The review discusses nanocarrier stability, mucus interaction and absorption through the intestinal epithelium. The protein corona, which has raised interest over the last decade, is also discussed. The universal ideal surface is a myth and over-coated carriers are not a solution either. Besides, common excipients can be useful on several targets. The suitable design should rather take into account the composition, structure and behavior of unmodified nanomaterials.

Oral delivery of diabetes peptides - Comparing standard formulations incorporating functional excipients and nanotechnologies in the translational context

While some orally delivered diabetes peptides are moving to late development with standard formulations incorporating functional excipients, the demonstration of the value of nanotechnology in clinic is still at an early stage. The goal of this review is to compare these two drug delivery approaches from a physico-chemical and a biopharmaceutical standpoint in an attempt to define how nanotechnology-based products can be differentiated from standard oral dosage forms for oral bioavailability of diabetes peptides. Points to consider in a translational approach are outlined to seize the opportunities offered by a better understanding of both the intestinal barrier and of nano-carriers designed for oral delivery.

Pharmacokinetic, pharmacodynamic and biodistribution following oral administration of nanocarriers containing peptide and protein drugs

The influence of nanoparticle (NP) formulations on the pharmacokinetic, pharmacodynamic and biodistribution profiles of peptide- and protein-like drugs following oral administration is critically reviewed. The possible mechanisms of absorption enhancement and the effects of the physicochemical properties of the NP are examined. The potential advantages and challenges of physiologically-based pharmacokinetic (PBPK) modelling to help predict efficacy in man are discussed. The importance of developing and expanding the regulatory framework to help translate the technology into the clinic and accelerate the availability of oral nanoparticulate formulations is emphasized. In conclusion, opportunities for future work to improve the state of the art of oral nanomedicines are identified.

Synthesis and characterization of insulin/zirconium phosphate@TiO2 hybrid composites for enhanced oral insulin delivery applications

In this work, a series of composites of insulin (Ins)/zirconium phosphate (ZrP) were synthesized by intercalation method, then, these composites were coated with TiO₂ by sol-gel method to prepare Ins/ZrP@TiO₂ hybrid composites and the drug release of the composites was investigated by using UV-Vis spectroscopy. Ins/ZrP (10, 30, 60 wt%) composites were prepared by intercalation of insulin into the ZrP layers in water. Then Ins/ZrP composites were coated with different amounts of TiO₂ (30, 50, 100 wt %) by using titanium tetra n-butoxide, as precursor. Formation of intercalated Ins/ZrP and Ins/ZrP@TiO₂ hybrid composites was characterized by FT-IR, FE-SEM, BET and XRD analysis. Zeta potential of the optimized Ins/ZrP@TiO₂ hybrid composite was determined -27.2 mV. Cytotoxic effects of the optimized Ins/ZrP@TiO₂ hybrid composite against HeLa and Hek293T cell lines were evaluated using MTT assay and the results showed that designed drug delivery system was not toxic in biological environment. Compared to the Ins/ZrP composites, incorporation of TiO₂ coating enhanced the drug entrapment considerably, and reduced the drug release. The Ins/ZrP composites without TiO₂ coating released the whole drug after 30 min in pH 7.4 (phosphate buffer solution) while the TiO₂-coated composites released the entrapped drug after 20 h. In addition to increasing the shelf life of hormone, this nanoencapsulation and nanocoating method can convert the insulin utilization from injection to oral and present a painless and more comfortable treatment for diabetics.

Polymeric protective agents for nanoparticles in drug delivery and targeting

Surface modification/functionalization of nanoparticles (NPs) using polymeric protective agents is an issue of great importance and actuality for drug delivery and targeting. Improving the blood circulation half-life of surface-protected nanocarriers is closely related to the elimination of main biological barriers and limiting factors (protein absorption and opsonization), due to the phagocytic activity of reticuloendothelial system. For passive or active targeted delivery, in biomedical area, surface-functionalized NPs with tissue-recognition ligands were designed and optimized as a result of modern research techniques. Also, multi-functionalized nanostructures are characterized by enhanced bioavailability, efficacy, targeted localization, active cellular uptake, and low side effects. Surface-protected NPs are obtained from biocompatible, biodegradable and less toxic natural polymers (dextran, β-cyclodextrin, chitosan, hyaluronic acid, heparin, gelatin) or synthetic polymers, such as poly(lactic acid), poly(lactic-co-glycolic) acid, poly(ε-caprolactone) and poly(alkyl cyanoacrylates). PEGylation is one of the most important functionalization methods providing steric stabilization, long circulating and 'stealth' properties for both polymeric and inorganic-based nanosystems. In addition, for their antimicrobial, antiviral and antitumor effects, cutting-edge researches in the field of pharmaceutical nanobiotechnology highlighted the importance of noble metal (platinum, gold, silver) NPs decorated with biopolymers.

Biopharmaceutical evaluation of epigallocatechin gallate-loaded cationic lipid nanoparticles (EGCG-LNs): In vivo, in vitro and ex vivo studies

Cationic lipid nanoparticles (LNs) have been tested for sustained release and site-specific targeting of epigallocatechin gallate (EGCG), a potential polyphenol with improved pharmacological profile for the treatment of ocular pathologies, such as age-related macular edema, diabetic retinopathy, and inflammatory disorders. Cationic EGCG-LNs were produced by double-emulsion technique; the in vitro release study was performed in a dialysis bag, followed by the drug assay using a previously validated RP-HPLC method. In vitro HET-CAM study was carried out using chicken embryos to determine the potential risk of irritation of the developed formulations. Ex vivo permeation profile was assessed using rabbit cornea and sclera isolated and mounted in Franz diffusion cells. The results show that the use of cationic LNs provides a prolonged EGCG release, following a Boltzmann sigmoidal profile. In addition, EGCG was successfully quantified in both tested ocular tissues, demonstrating the ability of these formulations to reach both anterior and posterior segment of the eye. The pharmacokinetic study of the corneal permeation showed a first order kinetics for both cationic formulations, while EGCG-cetyltrimethylammonium bromide (CTAB) LNs followed a Boltzmann sigmoidal profile and EGCG-dimethyldioctadecylammonium bromide (DDAB) LNs a first order profile. Our studies also proved the safety and non-irritant nature of the developed LNs. Thus, loading EGCG in cationic LNs is recognised as a promising strategy for the treatment of ocular diseases related to anti-oxidant and anti-inflammatory pathways.

The effect of curcumin and its nanoformulation on adjuvant-induced arthritis in rats

Background

Rheumatoid arthritis (RA), induced by the prolonged inappropriate inflammatory responses, is one of the most prevalent of all chronic inflammatory joint diseases. Curcumin (CM), a yellow hydrophobic polyphenol derived from the herb turmeric, has various pharmacological activities against many chronic diseases and acts by inhibiting cell proliferation and metastasis and downregulating various factors, including nuclear factor kappa B, interleukin-1β and TNF-α. Given the pathogenesis of RA, we hypothesized that the drug also has antiarthritic effects. The aims of the present study included the following: 1) examining the therapeutic effect of CM administered via intravenous (iv) injection on RA and 2) formulating the drug into oil–water nanoemulsions (Ns) to overcome the low oral bioavailability of CM and achieve oral delivery of the drug.

Methods

The effect of CM administered through iv injection on adjuvant-induced arthritis in rats was studied in terms of paw swelling, weight indices of the thymus and spleen, and pathological changes in nuclear factor kappa B expression and inflammatory cytokines. Methotrexate was used as a positive control. The CM-Ns were prepared using a high-pressure homogenizing method and characterized with respect to the particle size and morphology. The stability of the CM-Ns in simulated gastrointestinal (GI) fluids and in vitro release were also investigated. A pharmacokinetic study of the CM-Ns and suspensions in which the plasma levels were determined using an high performance liquid chromatography method and the pharmacokinetic parameters were calculated based on a statistical moment theory was also performed in rats.

Results

CM administered via iv injection had a therapeutic effect on RA similar to methotrexate. CM-Ns with a diameter of approximately 150 nm were successfully prepared, and the drug was well encapsulated into the Ns without degradation in simulated GI conditions. The area under the curve (AUC) and C_max for the CM-Ns were more than threefold greater than those for the suspensions; moreover, similar decreases in the levels of TNF-α and interleukin-1β in both synovial fluid and blood serum were obtained from oral administration of CM-Ns and iv injection.

Conclusion

CM was an effective antiarthritic agent, and the present N formulation appeared to be a promising system that allowed RA therapy with CM to be converted from iv to oral administration.

Mucoadhesive oral films: The potential for unmet needs

Oral drug delivery is the most common route of drug administration. Nevertheless, there are some important limitations that reinforce the need for developing new drug delivery systems. Mucoadhesive oral films (MOF) are promising dosage forms that adhere to the oral mucosa and deliver the drug through it, which present several advantages. These include: bypassing the hepatic first pass effect, fast onset of action, ease of transportation and handling. The use of such dosage form is beneficial for drugs that have poor oral bioavailability and also for drugs that need to be rapidly absorbed. In spite of the known benefits, the number of marketed MOF is still quite small. This review explores the products under development and corresponding clinical trials in respect to their status, therapeutic indication, companies involved and technologies. In this way, it was possible to identify the preferred therapeutic indications, new research and market trends as well as future prospects of MOF. Moreover, it is reasonable to expect an increase in the number of products on the market due to their great potential to satisfy unmet medical needs.

Active Targeted Nanoparticles for Oral Administration of Gastric Cancer Therapy

Gastric carcinogenesis is a commonly diagnosed type of cancer and has a dismal prognosis because of the rate at which it aggressively spreads and because of the lack of effective therapies to stop its progression. This study evaluated a type of oral drug delivery system of a potential target-activated nanosizer comprising a fucose-conjugated chitosan and polyethylene glycol-conjugated chitosan complex with gelatin containing encapsulated green tea polyphenol extract epigallocatechin-3-gallate, allowing oral administration of the drug through a site-specific release in gastric cancer cells. The results demonstrated that the nanoparticles effectively reduced drug release within gastric acids and that a controlled epigallocatechin-3-gallate release inhibited gastric cancer cell growth, induced cell apoptosis, and reduced vascular endothelial growth factor protein expression. Furthermore, in vivo assay results indicated that the prepared epigallocatechin-3-gallate-loaded fucose-chitosan/polyethylene glycol-chitosan/gelatin nanoparticles significantly affected gastric tumor activity and reduced gastric and liver tissue inflammatory reaction in an orthotopic gastric tumor mouse model.

Acute exposure to silica nanoparticles aggravate airway inflammation: different effects according to surface characteristics

Silica nanoparticles (SNPs) are widely used in many scientific and industrial fields despite the lack of proper evaluation of their potential toxicity. This study examined the effects of acute exposure to SNPs, either alone or in conjunction with ovalbumin (OVA), by studying the respiratory systems in exposed mouse models. Three types of SNPs were used: spherical SNPs (S-SNPs), mesoporous SNPs (M-SNPs), and PEGylated SNPs (P-SNPs). In the acute SNP exposure model performed, 6-week-old BALB/c female mice were intranasally inoculated with SNPs for 3 consecutive days. In the OVA/SNPs asthma model, the mice were sensitized two times via the peritoneal route with OVA. Additionally, the mice endured OVA with or without SNP challenges intranasally. Acute SNP exposure induced significant airway inflammation and airway hyper-responsiveness, particularly in the S-SNP group. In OVA/SNPs asthma models, OVA with SNP-treated group showed significant airway inflammation, more than those treated with only OVA and without SNPs. In these models, the P-SNP group induced lower levels of inflammation on airways than both the S-SNP or M-SNP groups. Interleukin (IL)-5, IL-13, IL-1β and interferon-γ levels correlated with airway inflammation in the tested models, without statistical significance. In the mouse models studied, increased airway inflammation was associated with acute SNPs exposure, whether exposed solely to SNPs or SNPs in conjunction with OVA. P-SNPs appear to be relatively safer for clinical use than S-SNPs and M-SNPs, as determined by lower observed toxicity and airway system inflammation.

Effect of mucoadhesive polymers on the in vitro performance of insulin-loaded silica nanoparticles: Interactions with mucin and biomembrane models

The present paper focuses on the development and characterization of silica nanoparticles (SiNP) coated with hydrophilic polymers as mucoadhesive carriers for oral administration of insulin. SiNP were prepared by sol-gel technology under mild conditions and coated with different hydrophilic polymers, namely, chitosan, sodium alginate or poly(ethylene glycol) (PEG) with low and high molecular weight (PEG 6000 and PEG 20000) to increase the residence time at intestinal mucosa. The mean size and size distribution, association efficiency, insulin structure and insulin thermal denaturation have been determined. The mean nanoparticle diameter ranged from 289 nm to 625 nm with a PI between 0.251 and 0.580. The insulin association efficiency in SiNP was recorded above 70%. After coating, the association efficiency of insulin increased up to 90%, showing the high affinity of the protein to the hydrophilic polymer chains. Circular dichroism (CD) indicated that no conformation changes of insulin structure occurred after loading the peptide into SiNP. Nano-differential scanning calorimetry (nDSC) showed that SiNP shifted the insulin endothermic peak to higher temperatures. The influence of coating on the interaction of nanoparticles with dipalmitoylphosphatidylcholine (DPPC) biomembrane models was also evaluated by nDSC. The increase of ΔH values suggested a strong association of non-coated SiNP and those PEGylated nanoparticles coated with DPPC polar heads by forming hydrogen bonds and/or by electrostatic interaction. The mucoadhesive properties of nanoparticles were examined by studying the interaction with mucin in aqueous solution. SiNP coated with alginate or chitosan showed high contact with mucin. On the other hand, non-coated SiNP and PEGylated SiNP showed lower interaction with mucin, indicating that these nanoparticles can interdiffuse across mucus network. The results of the present work provide valuable data in assessing the in vitro performance of insulin-loaded SiNP coated with mucoadhesive polymers.

Surface engineered and ligand anchored nanobioconjugate: an effective therapeutic approach for oral insulin delivery in experimental diabetic rats

The present study was designed to enhance intestinal absorption of insulin by nanobioconjugate formulated with PEGylation and Concanavalin A based targeted synergistic approach. The attempts were aimed at maximizing bioavailability and therapeutic efficacy of insulin by incorporating it in Concanavalin A anchored PEGylated nanoconstructs. The Con A anchored PEGylated PLGA diblock copolymer was synthesized by modified surface functionalization method, and was then characterized by FTIR and 1H NMR spectrum analysis. The nanoparticles from synthesized polymers were prepared and characterized for mean size and distribution by laser diffraction spectroscopy. The physicochemically characterized (by SEM and TEM) formulations were evaluated for optimum particle size, polydispersity index, zeta potential and entrapment efficiency 196.3±4.5 nm, 0.15±0.04, -25.6±1.68 and 44.6±3.5% respectively. The insulin encapsulation efficiency and in vitro release were assessed by bicinchoninic protein assay (BCA). The in vitro results corroborated in vivo studies carried out in experimentally created diabetic albino rats. The nano-encapsulated insulin was discovered to meet the requirements by achieving better stability, improved absorption and enhanced oral bioavailability elucidated by in vivo and in vitro bioassays.

Surface engineering of silica nanoparticles for oral insulin delivery: characterization and cell toxicity studies

The present work aimed at studying the interaction between insulin and SiNP surfaced with mucoadhesive polymers (chitosan, sodium alginate or polyethylene glycol) and the evaluation of their biocompatibility with HepG2 and Caco-2 cell lines, which mimic in vivo the target of insulin-loaded nanoparticles upon oral administration. Thus, a systematic physicochemical study of the surface-modified insulin-silica nanoparticles (Ins-SiNP) using mucoadhesive polymers has been described. The surfacing of nanoparticle involved the coating of silica nanoparticles (SiNP) with different mucoadhesive polymers, to achieve high contact between the systems and the gut mucosa to enhance the oral insulin bioavailability. SiNP were prepared by a modified Stöber method at room temperature via hydrolysis and condensation of tetraethyl orthosilicate (TEOS). Interaction between insulin and nanoparticles was assessed by differential scanning calorimetry (DSC), X-ray and Fourier-transform infrared (FTIR) studies. The high efficiency of nanoparticles' coating resulted in more stable system. FTIR spectra of insulin-loaded nanoparticles showed amide absorption bands which are characteristic of α-helix content. In general, all developed nanoparticles demonstrated high biocompatible, at the tested concentrations (50-500 μg/mL), revealing no or low toxicity in the two human cancer cell lines (HepG2 and Caco-2). In conclusion, the developed insulin-loaded SiNP surfaced with mucoadhesive polymers demonstrated its added value for oral administration of proteins.