Cadmium adsorption characteristics of biochars derived using various pine tree residues and pyrolysis temperatures

Competitive adsorption behaviour and mechanisms of cadmium, nickel and ammonium from aqueous solution by fresh and ageing rice straw biochars

In this study, competitive adsorption behaviour and mechanisms of Cd²⁺, Ni²⁺ and NH₄⁺ by fresh and artificially ageing biochars produced from rice straw at 400 and 700 °C (RB400, RB700, HRB400 and HRB700) were investigated. Cd²⁺ competed with Ni²⁺ and NH₄⁺ for the overlapped adsorption sites on the biochars. For Cd²⁺ and Ni²⁺ adsorption, cation exchange (Q_ci) and mineral co-precipitation (Q_cp) were the primary mechanisms for the low-temperature and high-temperature biochars, respectively. However, the other potential mechanisms (Q_co) made the greatest contributions to NH₄⁺ adsorption (>60%). Cd²⁺ and Ni²⁺ competition increased the proportions of mineral co-precipitation (Q_cp) and other potential mechanisms (Q_co) but decreased that of cation exchange (Q_ci) mechanism. Biochar ageing increased the contribution of surface complexation (Q_cf) mechanism, especially for the low-temperature biochars. This study indicated that biochar aging and types and states of adsorbates should be considered when biochars were applied to remove contaminants.

Magnetic activated biochar nanocomposites derived from wakame and its application in methylene blue adsorption

In this work, magnetic wakame biochar nanocomposites for the first time had been synthesized to investigate their adsorption to methylene blue dye. As-prepared magnetic biochar samples were obtained by the impregnation method to load nickel on wakame biochar via one-step carbonization with activation agent KOH at 800 °C. The prepared samples were characterized by BET, XRD, FTIR, Raman, SEM, TEM and so on. The results exhibited that the maximum adsorption capacity of BW(Ni)0.5 to methylene blue could reach 479.49 mg/g at 20 °C. The adsorption behavior was more suitable for Langmuir isotherm equation and the kinetic data were most consistent with the pseudo second-order model. And also, the adsorption reaction was a spontaneous and endothermic process. After five cycles, it was found that BW(Ni)0.5 had a high adsorption capacity for methylene blue (117.58 mg/g). This study demonstrated that wakame biochar could have great potential in dye wastewater treatment.

A critical review of different factors governing the fate of pesticides in soil under biochar application

Pesticides are extensively used in the modern agricultural system. The inefficient and extensive use of pesticides during the last 5 to 6 decades inadvertently led to serious deterioration of environmental quality with health risk to living organisms, including humans. It is important to use some environmentally-friendly and sustainable approaches to remediate, restore and maintain soil quality. Biochar has gained considerable attention globally as a promising soil amendment because it has the ability to adsorb and as such minimize the bioavailability of pesticides in soils. This review emphasizes the recent trends and implications of biochar in pesticide-contaminated soils, as well as highlights need of the pesticides use and associated environmental issues in context of the biochar application. The overarching aim of this review is to signify the role of biochar on primary processes such as effect of biochar on the persistence, mineralization, leaching and efficacy of pesticides in soil. Notably, the effects of biochar on pesticide adsorption-desorption, degradation and bioavailability under various operating/production conditions are critically discussed. This review delineates the indirect impact of biochar on pesticides persistence in soils and proposes key recommendations for future research which are essential for the remediation and restoration of pesticides-impacted soils.

Comparison of CU(II), MN(II) and ZN(II) adsorption on biochar using diagnostic and simulation models

With the increase of urbanization and human consumption, the extraction of potentially toxic elements (PTEs) causes higher risk of them to enter sources of human food and potable water. Adsorption has been studied extensively as phenomena to reduce element mobility in both natural and engineered systems. The need to adapt the adsorption models to simulate the adsorption increases as the variety of adsorbents of natural origin is getting bigger and bigger due to their sustainability, availability and low costs. Adsorption of PTEs was analysed in the case of biochar which is a widely studied adsorbent, however, the studies are often limited to standard adsorption equilibrium and kinetic procedures without further analyses into the adsorbate and adsorbent contact zone. Zn(II), Cu(II) and Mn(II) were chosen study due to their nutritional and toxicological features. Diagnostic methods were used to differentiate the metal behaviour during adsorption and dynamic intraparticle model was further employed to simulate the kinetic conditions. Harkins-Jura isotherm model and pseudo-second kinetic model were determined to fit the adsorption of PTEs on biochar. According to the adsorption efficiency and capacity, PTEs fell into the following sequence: Cu(II) > Mn(II)>Zn(II). It was observed that the kinetics of Cu(II) decreased in the solution by about 1.7 times more than of Zn(II) and about 2.3 times more than of Mn(II). Cu(II) decreased faster and more suddenly than Mn(II) and Zn(II) in the solution on the particle surface and in the solution inside the particle.

Competitive sorption and availability of coexisting heavy metals in mining-contaminated soil: Contrasting effects of mesquite and fishbone biochars

Mesquite and fishbone were pyrolyzed to produce biochar (MBC and FBC, respectively) at different temperatures. The effects of the MBC and FBC on the removal of single and competitive metals (Cd, Pb, Zn, and Cu) from aqueous solutions were evaluated. A greenhouse pot experiment was also conducted using wheat plants with the mining-contaminated soils. In the presence of MBC or FBC (dosages of 15 and 30 g kg^-1), the bioavailability of co-existing Cd, Pb, Zn, Cu, Mn, and Fe were assessed. The results clearly indicated competitive adsorption among metals with the highest adsorption preference toward Pb. The removal efficiency and partition coefficient (PC) values of heavy metals for FBCs were higher than those for MBCs. These two values increased with MBC pyrolysis temperature under both single- and multi-metals adsorption conditions. Applying FBC to mining soil resulted in the highest reduction in most NH₄NO₃-extractable heavy metals, reducing their availability to wheat plants. At the highest application dosage of 30 g kg^-1, the highest metal immobilization, which accounted for 40.0% and 43.0% for Pb, 61.7% and 66.2% for Cu, 48.3% and 55.6% for Zn, and 32.7% and 33.8% for Cd, was achieved following the application of FBC400 and FBC600, respectively. However, applying MBC lead to a significant reduction in the availability of Cu and Pb but not that of Zn and Cd. FBC is thus more effective in removing heavy metal from aqueous solutions, as well as in immobilizing co-existing heavy metals in contaminated mining soil. It could, therefore, be an effective sorbent and immobilizing agent.

Spent Ganoderma lucidum substrate derived biochar as a new bio-adsorbent for Pb2+/Cd2+ removal in water

The present study firstly reports spent Ganoderma lucidum substrate derived biochars (SLBCS) for the effective removal of Pb²⁺/Cd²⁺ from water. The effects of pyrolysis temperature on the SLBCS characteristics and Pb²⁺/Cd²⁺ adsorption mechanism was studied systematically. The surface physicochemical properties of SLBCS were significantly affected by the pyrolysis temperature. The increase in pyrolysis temperature from 250 to 650 °C resulted in a drastic increase in the biochar surface area and the well development of mesoporous structure, which could provide more effective adsorption sites for Pb²⁺ and Cd²⁺ onto SLBCS. According to the Langmuir model, the obtained maximum adsorption capacity of Pb²⁺ onto SL650 reached 262.76 mg g^-1, while that of Cd²⁺ reached 75.82 mg g^-1. The adsorption capacities of SL650 for Pb²⁺ and Cd²⁺ were even higher than that of other modified biochars. The high adsorption capacity of SL650 for Pb²⁺, attributed to the precipitation supported by high temperature, benefitted the formation of carbonate minerals. Two possible mechanisms involved in Cd²⁺ sorption: carbonate precipitation and coordination with π electrons. Desorption of SL650 showed high efficiency for Pb²⁺, but slightly low efficiency for Cd²⁺. These results indicate that SL650 can be applied for removing heavy metals, especially Pb²⁺, from polluted water.

In-Situ Catalytic Fast Pyrolysis of Pinecone over HY Catalysts

The in-situ catalytic fast pyrolysis of pinecone over HY catalysts, HY(30; SiO2/Al2O3), HY(60), and 1% Ni/HY(30), was studied by TGA and Py-GC/MS. Thermal and catalytic TGA indicated that the main decomposition temperature region of pinecone, from 200 to 400 °C, was not changed using HY catalysts. On the other hand, the DTG peak heights were differentiated by the additional use of HY catalysts. Py-GC/MS analysis showed that the efficient conversion of phenols and other oxygenates formed from the pyrolysis of pinecone to aromatic hydrocarbons could be achieved using HY catalysts. Of the HY catalysts assessed, HY(30), showed higher efficiency in the production of aromatic hydrocarbons than HY(60) because of its higher acidity. The aromatic hydrocarbon production was increased further by increasing the pyrolysis temperature from 500 to 600 °C and increasing the amount of catalyst due to the enhanced cracking ability and overall acidity. The use of 1% Ni/HY(30) also increased the amount of monoaromatic hydrocarbons compared to the use of HY(30) due to the additional role of Ni in enhancing the deoxygenation and aromatization of reaction intermediates.