Delivery and expression of pDNA embedded in collagen matrices

Overexpression of lysyl oxidase to increase matrix crosslinking and improve tissue strength in dermal wound healing

In this study, we aimed to increase crosslinking in collagen and elastin in the extracellular matrix through overexpression of lysyl oxidase (LO) in order to improve mechanical strength in dermal wounds during healing. We had used a gene activated matrix (GAM) approach to locally deliver plasmid DNA (pDNA) complexed with polyethylenimine (PEI) in collagen gels at the wound site for localized and sustained transfection of cells involved in the healing process. We first demonstrated in vitro that PEI-pDNA complexes in collagen gels could be taken up and expressed by cultured fibroblasts for at least 20 days. In vitro studies showed that fibroblast-seeded GAMs with the LO transgene exhibited over a 3-fold increase in mechanical strength as compared with a green fluorescent protein (GFP)-transgene control. Addition of an inhibitor of LO abolished this increase. We applied this system in a rat dermal wound healing model and showed that treatment with LO-producing GAMs led to significantly enhanced mechanical strength of the wound site.

Polymers for gene delivery across length scales

A number of human diseases stem from defective genes. One approach to treating such diseases is to replace, or override, the defective genes with normal genes, an approach called 'gene therapy'. However, the introduction of correctly functioning DNA into cells is a non-trivial matter, and cells must be coaxed to internalize, and then use, the DNA in the desired manner. A number of polymer-based synthetic systems, or 'vectors', have been developed to entice cells to use exogenous DNA. These systems work across the nano, micro and macro length scales, and have been under continuous development for two decades, with varying degrees of success. The design criteria for the construction of more-effective delivery vectors at each length scale are continually evolving. This review focuses on the most recent developments in polymer-based vector design at each length scale.

Ferrocene-containing cationic lipids for the delivery of DNA: Oxidation state determines transfection activity

The ability of two redox-active, ferrocene-containing cationic lipids [11-(ferrocenylundecyl)trimethylammonium bromide (FTMA) and bis(11-ferrocenylundecyl)dimethylammonium bromide (BFDMA)] to transfect mammalian cells was investigated. This study sought to determine the range of conditions over which these lipids were capable of transfecting cells and whether the oxidation state of the ferrocenyl groups in these materials could be used to influence the extent of transfection. Experiments conducted in the COS-7 cell line demonstrated that reduced and oxidized FTMA were substantially cytotoxic and did not transfect cells. Subsequent experiments conducted using BFDMA and reporter plasmids encoding enhanced green fluorescent protein (EGFP) and firefly luciferase demonstrated that BFDMA was able to transfect cells. However, the extent of transfection depended significantly upon both the concentration of BFDMA and the oxidation state of the lipid. Quantitative characterization of cytotoxicity and gene expression demonstrated that a window of concentration existed over which reduced BFDMA was non-cytotoxic and yielded high levels of transfection, but over which electrochemically oxidized BFDMA yielded very low (background) levels of transfection. Characterization of lipoplexes using dynamic light scattering demonstrated that reduced and oxidized BFDMA formed small aggregates (ca. 90 to 250nm) at concentrations of lipid ranging from 2 to 10 microM. Taken together, these results demonstrate that the oxidation state of BFDMA, which can be controlled electrochemically, can be used to control the extent of cell transfection. These results could form the basis of transfection procedures that exploit the redox behavior of ferrocene-containing lipids to achieve active spatial and temporal control over transfection using electrochemical methods.

Regional gene therapy for full-thickness articular cartilage lesions using naked DNA with a collagen matrix

A novel gene therapy approach for treating damaged cartilage is proposed that involves placing endotoxin-free cDNA containing the gene for bone morphogenetic protein-2 (BMP-2) in type I collagen sponges and then transferring the naked plasmid DNA construct to the injury site. A full-thickness cartilaginous defect in rabbits implanted with plasmid containing a marker gene (beta-galactosidase) showed expressed protein as detected by immunostaining. At 1 week postimplantation, mesenchymal cells subjacent to the defect had incorporated the implanted naked plasmid DNA and, once transfected, served as local bioreactors, transiently producing the gene product. Plasmids containing the gene for BMP-2 implanted in collagen sponges in cartilage lesions stimulated hyalinelike articular cartilage repair at 12 weeks postimplantation, nearly equivalent in quality to that induced by collagen sponges with recombinant BMP-2 protein. Our approach circumvents the risks of inflammation and immunogenic response associated with the use of viral vectors. Naked plasmid DNA as a vehicle for transferring therapeutic genes has been shown to be effective in a therapeutic model within rabbit articular cartilage and appears to be safe and cost effective.

Factors That Influence Transgene Expression and Cell Viability on DNA–PEI-Seeded Collagen Films

Gene delivery from tissue-engineering devices has the potential to improve healing, but better regulation of the level and duration of gene expression is needed. We hypothesized that transgene expression could be controlled by varying the fabrication and soaking parameters used in making collagen- based gene delivery scaffolds. Collagen films were made from acid-insoluble type I bovine dermal collagen and seeded with plasmid DNA encoding firefly luciferase, complexed with polyethylenimine. By varying the thickness of the films, the volume of the DNA soak solution, and the pH of the DNA soak solution, and by cross-linking the films, we identified variable combinations that produce significantly different levels of cell number and transgene expression in L-929 cells in vitro. Increasing film thickness or soak volume increased overall reporter gene expression. Decreasing film thickness or soak volume decreased cell number but did not significantly change reporter gene expression per cell. Cross-linking by ultraviolet irradiation (before adding the DNA) significantly decreased transgene expression, probably because of decreased swelling of the collagen film. These results suggest that collagen-based biomaterials may be designed and fabricated to induce, in a controlled fashion, various levels of cellularity and transgene expression.

Gene delivery through cell culture substrate adsorbed DNA complexes

Efficient gene delivery is a fundamental goal of biotechnology and has numerous applications in both basic and applied science. Substrate-mediated delivery and reverse transfection enhance gene transfer by increasing the concentration of DNA in the cellular microenvironment through immobilizing a plasmid to a cell culture substrate prior to cell seeding. In this report, we examine gene delivery of plasmids that were complexed with cationic polymers (polyplexes) or lipids (lipoplexes) and subsequently immobilized to cell culture or biomaterial substrates by adsorption. Polyplexes and lipoplexes were adsorbed to either tissue culture polystyrene or serum-adsorbed tissue culture polystyrene. The quantity of DNA immobilized increased with time of exposure, and the deposition rate and final amount deposited depended upon the properties of the substrate and complex. For polyplexes, serum modification enhanced reporter gene expression up to 1500-fold relative to unmodified substrates and yielded equivalent or greater expression compared to bolus delivery. For lipoplexes, serum modification significantly increased the number of transfected cells relative to unmodified substrates yet provided similar levels of expression. Immobilized complexes transfect primary cells with improved cellular viability relative to bolus delivery. Finally, this substrate-mediated delivery approach was extended to a widely used biomaterial, poly(lactide-co-glycolide). Immobilization of DNA complexes to tissue culture polystyrene substrates can be a useful tool for enhancing gene delivery for in vitro studies. Additionally, adapting this system to biomaterials may facilitate application to fields such as tissue engineering.

Synthetic Biocompatible Cyclodextrin-Based Constructs for Local Gene Delivery to Improve Cutaneous Wound Healing

The localized, sustained delivery of growth factors for wound healing therapy is actively being explored by gene transfer to the wound site. Biocompatible matrices such as bovine collagen have demonstrated usefulness in sustaining gene therapy vectors that express growth factors in local sites for tissue repair. Here, new synthetic biocompatible materials are prepared and shown to deliver a protein to cultured cells via the use of an adenoviral delivery vector. The synthetic construct consists of a linear, beta-cyclodextrin-containing polymer and an adamantane-based cross-linking polymer. When the two polymers are combined, they create an extended network by the formation of inclusion complexes between the cyclodextrins and adamantanes. The properties of the network are altered by controlling the polymer molecular weights and the number of adamantanes on the cross-linking polymer, and these modifications and others such as replacement of the beta-cyclodextrin (host) and adamantane (guest) with other cyclodextrins (hosts such as alpha, gamma, and substituted members) and inclusion complex forming molecules (guests) provide the ability to rationally design network characteristics. Fibroblasts exposed to these synthetic constructs show proliferation rates and migration patterns similar to those obtained with collagen. Gene delivery (green fluorescent protein) to fibroblasts via the inclusion of adenoviral vectors in the synthetic construct is equivalent to levels observed with collagen. These in vitro results suggest that the synthetic constructs are suitable for in vivo tissue repair applications.

Controlled release systems for DNA delivery

Adapting controlled release technologies to the delivery of DNA has the potential to overcome extracellular barriers that limit gene therapy. Controlled release systems can enhance gene delivery and increase the extent and duration of transgene expression relative to more traditional delivery methods (e.g., injection). These systems typically deliver vectors locally, which can avoid distribution to distant tissues, decrease toxicity to nontarget cells, and reduce the immune response to the vector. Delivery vehicles for controlled release are fabricated from natural and synthetic polymers, which function either by releasing the vector into the local tissue environment or by maintaining the vector at the polymer surface. Vector release or binding is regulated by the effective affinity of the vector for the polymer, which depends upon the strength of molecular interactions. These interactions occur through nonspecific binding based on vector and polymer composition or through the incorporation of complementary binding sites (e.g., biotin-avidin). This review examines the delivery of nonviral and viral vectors from natural and synthetic polymers and presents opportunities for continuing developments to increase their applicability.