Superior adsorption capacity of functionalised straw adsorbent for dyes and heavy-metal ions

One-pot synthesis of brewer's spent grain-supported superabsorbent polymer for highly efficient uranium adsorption from wastewater

High-efficient and fast adsorption of uranium is important to reduce the hazards caused by the uranium contamination of water environment due to the increased human activities. Herein, brewer's spent grain (BSG)-supported superabsorbent polymers (SAP) with different cross-linking densities are prepared as cheap and eco-friendly adsorbents for the first time via one-pot swelling and graft polymerization. A 7 wt% NaOH solution is used to swell BSG before grafting and subsequently neutralize the acrylic acid to control the reaction rate without producing alkaline wastewater. Compared with the traditional methods, swelling improves the grafting density and the utilization of raw materials due to the increased disorder degree of the BSG fibers. This results in the grafting of abundant carboxyl and amide groups onto the BSG backbone, forming a strongly hydrophilic polymer network of the BSG-SAP. Compared with the reference polymers without BSG, BSG-SAP presents higher adsorption capacity and enhanced reusability. The highly cross-linked BSG-SAP (BSG-SAP-H) shows an outstanding adsorption capacity of U(VI) (1465 mg/g at pH₀ = 4.6), a fast adsorption rate (81% of equilibrium adsorption capacity in 15 min), and a high selectivity in the presence of competing ions. Adsorption mechanism studies reveal the involvement of amide groups, a bidentate binding structure between UO₂²⁺ and the carboxyl groups, and a cation exchange between Na⁺ and UO₂²⁺. More importantly, the adsorption capacity of BSG-SAP-H reaches 254.4 mg/g in the fixed-bed column experiment at a low initial concentration (c₀(U) = 30 mg/L) and keeps 80% of the adsorption capacity after four cycles, indicating a great potential for uranium removal from wastewater. This work shows a suitable approach to explore the untreated biomass to prepare SAP with enhanced adsorption performance via a general and low-cost strategy.

Anionic Dye Removal Using a Date Palm Seed-Derived Activated Carbon/Chitosan Polymer Microbead Biocomposite

The discharge of textile wastewater into aquatic streams is considered a major challenge due to its effect on the water ecosystem. Direct blue 78 (DB78) dye has a complex structure. Therefore, it is difficult to separate it from industrial wastewater. In this study, carbon obtained from the pyrolysis of mixed palm seeds under different temperatures (400 °C and 1000 °C) was activated by a thermochemical method by using microwave radiation and an HCl solution in order to improve its adsorption characteristics. The generated activated carbon was used to synthesize a novel activated carbon/chitosan microbead (ACMB) for dye removal from textile wastewater. The obtained activated carbon (AC) was characterized by a physicochemical analysis that included, namely, particle size, zeta potential, SEM, EDX, and FTIR analyses. A series of batch experiments were conducted in terms of the ACMB dose, contact time, pH, and activated carbon/chitosan ratios in synthetic microbeads for enhancing the adsorption capacity. A remarkable improvement in the surface roughness was observed using SEM analysis. The particle surface was transformed from a slick surface with a minor-pore structure to a rough surface with major-pore structure. The zeta potential analysis indicated a higher improvement in the carbon surface charge, from -35 mv (before activation) to +20 mv (after activation). The adsorption tests showed that the dye-removal efficiency increased with the increasing adsorbent concentration. The maximum removal efficiencies were 97.8% and 98.4% using 3 and 4 g/L of AC_400°C MB-0.3:1 and AC_1000°C MB-0.3:1, respectively, with initial dye concentrations of 40 mg/L under acidic conditions (pH = 4-5), and an optimal mixing time of 50 min. The equilibrium studies for AC_400°C MB-0.3:1 and AC_1000°C MB-0.3:1 showed that the equilibrium data best fitted to the Langmuir isothermal model with R² = 0.99. These results reveal that activated carbon/chitosan microbeads are an effective adsorbent for the removal of direct blue 78 dye and provide a new platform for dye removal.

Preparation of novel N-doped biochar and its high adsorption capacity for atrazine based on π-π electron donor-acceptor interaction

Novel nitrogen (N)-doped cellulose biochar (NC1000-10) with large adsorption capacity (103.59 mg g^-1) for atrazine (ATZ) was synthesized through the one-pot method. It has the best adsorption efficiency than N-doped biochars prepared from hemicellulose and lignin. The adsorption behaviors of ATZ by N-doped biochars with different N doping ratios (NC1000-5, NC1000-10, NC1000-20 and NC1000-30) were significantly different, which was attributed to the difference of sp² conjugate C (I_D/I_G = 0.99-1.18) and doped heteroatom N (pyridinic N, pyrrolic N and graphitic N). Adsorption performance of ATZ on NC1000-10 conformed to the pseudo-second-order kinetic and Langmuir adsorption isotherm model. Thermodynamic calculations showed that adsorption performance was favorable. Besides, wide pH adaptability (pH = 2-10), good resistance to ionic strength and excellent recycling efficiency make it have extensive practical application potential. Further material characterizations and the density functional theory (DFT) calculations indicated that good adsorption performance of NC1000-10 for ATZ mainly depended on chemisorption, and π-π electron donor-acceptor (EDA) interaction contributed the most due to high graphitization degree. Specifically, pyridinic N and graphitic N further promoted adsorption performance by hydrophobic effect and π-π EDA interaction between ATZ and NC1000-10, respectively. Pyrrolic N and other surface functional groups (-COOH, -OH) facilitated the hydrogen bond effect.

Preparation and performance evaluation of chitosan/polyvinylpyrrolidone/polyvinyl alcohol electrospun nanofiber membrane for heavy metal ions and organic pollutants removal

In this work, a novel electrospun chitosan (CS)/polyvinylpyrrolidone (PVP)/polyvinyl alcohol (PVA) nanofibrous membrane was prepared to remove heavy metal ions and organic pollutants from water. The nanofiber morphologies were adjusted through the optimal electrospinning process parameters. Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM) characterizations indicated that a well-crosslinked CS/PVP/PVA nanofiber film was formed. Under the optimize conditions, the obtained CS/PVP/PVA nanofiber membranes exhibited porous and uniform nanofibrous structures with an average diameter of 160 nm and a pure water permeability of 4518.91 L·m^-2·h^-1·bar^-1. In addition, the adsorption and separation performance of CS/PVP/PVA nanofiber membranes were evaluated with Cu(II), Ni(II), Cd(II), Pb(II) and Methylene Blue (MB), Malachite Green (MG) as target ions and dyes. The results showed that the retention rate of CS/PVP/PVA nanofiber membranes for Cu(II), Ni(II), Cd(II), Pb(II), MG and MB can reach 94.20%, 90.35%, 83.33%, 80.12%, 84.01% and 69.91%, respectively. The adsorption capacities of Cu(II), Ni(II), Cd(II), Pb(II), MG and MB were 34.79, 25.24, 18.07, 16.05, 17.86 and 13.27 mg g^-1. The adsorption kinetics of heavy metal ions and dyes by the nanofiber membranes can be explained by the Langmuir isotherm model and represented by the pseudo-second-order kinetic mechanism that determined the spontaneous chemisorption process. This study provides a synthetic approach to membranes for the removal of organic and heavy metal micropollutants from water.

Highly efficient and rapid purification of organic dye wastewater using lignin-derived hierarchical porous carbon

Coating manufacturing, textile processing, and plastic industry have led to dramatical release levels of hazardous organic dye pollutants threatening public health and the environment. To solve this problem, porous carbon materials are being developed following with the United Nations initiative on water purification. However, conventional porous carbon materials face many challenges, such as limited removal rates, low adsorption capacity, and high chemicals consumption, hampering their large-scale utilization in dye wastewater treatment. Herein, we demonstrate a high-performance lignin-derived hierarchical porous carbon (LHPC) material directly prepared from renewable lignin through a low-cost activation procedure. The large specific surface area (1824 m²/g) enables the rapid and effective adsorption of organic dyes. Therefore, the LHPC exhibits an ultrahigh adsorption ability (1980.63 mg/g) and removal rate (99.03% in 10 min) for Azure B, superior to that of other adsorbents. Additionally, the LHPC adsorbent, organic dyes, eluting agent, and water all can be recycled and reused in a designed close-looped system. Its high removal ability and rate, strong retrievability, low-cost and scalable production combined with high dyes adsorption universality, positions our LHPC as a promising commercial adsorbent candidate for the purification of harmful organic dye wastewater, especially for heavily polluted area with an insistent demand for clear water.

Synergetic removal of oppositely charged dyes by co-precipitation and amphoteric self-floating capturer: Mechanism investigation by molecular simulation

The adsorption performances of adsorbents to dyes are hard to maintain in a wide pH range because most of the reactions are pH-dependent, developing a cost-effective strategy to break the pH-limitation is significant. In this study, an amphoteric self-floating adsorbent (Am-SA) was synthesized by hollow silica microsphere surface modification, which was useful to capture anionic acid orange 7 (AO7) and cationic crystal violet (CV) dyes, but the adsorption performances were also greatly affected by pH. Fortunately, a co-precipitation phenomenon was noticed when the AO7 and CV solutions were mixed with a 1:1 molecule ratio. The precise structures of AO7 and CV molecules were constructed and the AO7-CV-H₂O mixed system was structured by Materials Studio. Besides, this system was involved in a dynamic simulation to reveal the mechanism of the co-precipitation phenomenon. The simulation results showed H₂O molecules dispersed out of the system via thermal motions within 30 ps, but the AO7 and CV molecules aggregated to each other via electrostatic attractions. The energy calculations also demonstrated the electrostatic attraction between AO7 and CV is the dominant factor that induced the aggregation. The aggregation phenomena were also observed in various mixed cationic-anionic dyes systems. The removals of dyes significantly improved in a wide pH range in the mixed systems as the captures of the aggregated dye clusters were much easier than that of independent dye molecules, and both co-precipitation and adsorption contributed to it. Proper utilization of the aggregation behaviors between dyes can be regarded as a prospective strategy in cost-effective treatments.

Flower-Shaped Ni/Co MOF with the Highest Adsorption Capacity for Reactive Dyes

Reactive dyes are widely used in textile industry, but their excessive use has caused several water pollution problems. In order to reasonably treat printing and dyeing wastewater, the highly efficient adsorbent for reactive dyes employed in this study is a new type metal-organic framework (MOF) material. Ni/Co MOF (NCM) was synthesized using the solvothermal method; then, the materials were analyzed by a series of characterization methods. This study mainly investigated the adsorption properties of NCM toward reactive dyes, and the adsorption capacities of NCM toward reactive red 218 were up to 200 mg·g^-1. The results were found to conform to the Langmuir isotherm model, and the pseudo-second-order kinetic model by performing kinetic and isotherm studies on the adsorption process of reactive red 218 on NCM. The results of the intraparticle diffusion model suggest that the binding of reactive red 218 to NCM was mainly divided into three steps: adsorption, diffusion, and saturation. Moreover, it was concluded by thermodynamic fitting of the adsorption process that the adsorption of reactive red 218 by NCM proceeded spontaneously and was accompanied by an endothermic reaction, in which the adsorption of both occurred mainly by electrostatic attraction. The NCM has good reusability and still has good adsorption performance after being reused 5 times. Therefore, NCM is a very promising and excellent adsorbent for the treatment of dye wastewater because of its high efficiency and reusability.

CO2-responsive functional cotton fibers decorated with Ag nanoparticles for "smart" selective and enhanced dye adsorption

Novel Ag nanoparticles (NPs) decorated CO₂-responsive cotton fiber (PCCF@Ag) as eco-friendly adsorbent was prepared via in-situ growth of Ag NPs on the poly(2-(dimethylamino) ethyl methacrylate-co-4-acryloyloxybenzophenone) coated cotton fiber. The as-prepared PCCF@Ag displayed excellent adsorption performance toward both anionic and cationic dyes with or without CO₂ stimulation, even under a wide range of pH from 3 to 11. The maximum adsorption capacities of the as-prepared PCCF@Ag toward anionic dye (1538.5 mg g^-1 for MO) and cationic dyes (944.0 mg g^-1 for MEB and 415.6 mg g^-1 for NR) were satisfactory. The adsorption processes were described better by the Langmuir isotherm and pseudo-second-order kinetic models, respectively. Notably, upon CO₂ stimulation, the PCCF@Ag exhibited significantly enhanced adsorption capacity toward anionic dyes, following ultrafast adsorption rate, which made the PCCF@Ag could selectively adsorb anionic dyes from mixture because of greatly different adsorption rates between anionic dyes (adsorption equilibrium within 2 min) and cationic dyes (adsorption equilibrium over 12 h). Additionally, the PCCF@Ag could maintain over 91.0% of adsorption capacity even after ten cycles, indicating its outstanding reusability. Meanwhile, the as-obtained PCCF@Ag exhibited excellent antibacterial activity. Overall, the as-obtained PCCF@Ag could be considered as a promising dye scavenger for wastewater remediation.

A novel preparation process of straw-based iron material for enhanced persulfate activation of reactive black 5 degradation

In this study, a new straw-iron composite material (ST@Fe) was synthesized through impregnation and freeze-drying process for persulfate (PS) activation to degrade reactive black 5 (RB5). Scanning electron microscope, Brunauer-Emmett-Teller, Fourier transform infrared spectrometry, and X-ray photoelectron spectroscopy confirmed that straw owns huge pore structure and varieties of organic functional groups, including hydroxyl carboxyl groups, which could effectively adsorb and complex iron ions. The interaction between the active iron particles in ST@Fe and straw generated Fe²⁺ for PS activation, effectively degrading over 94.80% of RB5 at an initial concentration of 20 ppm in 100 min with a specific degradation capacity of 18.97 min^-1 per unit of iron ions. ST@Fe/PS system demonstrated high tolerance in a wide initial pH range, which could gradually attack the RB5 molecular structure and significantly reduce the mineralization of water. Quenching experiments and electron paramagnetic resonance demonstrated the efficient generation of ROS including sulfate radicals, hydroxyl radicals, and singlet oxygen, and confirmed the dominance of sulfate radicals in the degradation process. The continuous degradation capacity and reusability of ST@Fe were also evaluated, which proved that the contaminant could be effectively degraded even after multiple cycles in the simulated textile wastewater, indicating its potential for use in practical remediation. This work provided a new method for the preparation of modified functional materials for the degradation of organic pollutants in textile wastewater and posed a novel strategy for the utilization of waste biomass.

Sugarcane cellulose-based composite hydrogel enhanced by g-C3N4 nanosheet for selective removal of organic dyes from water

The effective removal of toxic dyes from aqueous solution is of great significance for environmental protection. Herein, an eco-friendly sugarcane cellulose (SBC)/sodium carboxymethylcellulose (CMC-Na) adsorbent reinforced with carbon nitride (g-C₃N₄) was successfully prepared via a facile sol-gel method. The resulting gel-like adsorbent or composite hydrogel was comprehensively characterized with FTIR, SEM, EDS, TGA analysis. The adsorption behaviors of the adsorbent in the removal of methylene blue (MB) were systematically investigated. Results showed the pseudo-second-order kinetic model and Langmuir model described adsorption process accurately with the maximum adsorption capacity of 362.3 mg g^-1, indicating that adsorption behavior is a monolayer chemical adsorption. Moreover, the composited hydrogel displayed excellent adsorption selectivity on MB/MO or MB/RhB mixed dyes. In addition, adsorbent showed great stability and reusability with almost no loss in adsorption capacity after 7 cycles. Due to the facile preparation process and outstanding mechanical properties, as well as high recyclability, g-C₃N₄@SBC/CMC has great potential in wastewater treatment.

Selective adsorption of anionic dye from wastewater using polyethyleneimine based macroporous sponge: Batch and continuous studies

Dyes are well known for their hazardous impacts on public health and the environment. Dye removal using monolithic adsorbents is an attractive approach for industrial applications and process design owing to their utilization in both static and dynamic adsorption experiments. In the present work, polyethyleneimine (PEI) based macroporous monolithic sponge (S₁₀₀) was engineered by ice-templating method and used as an adsorbent. Both batch and continuous operations for dye removal were studied. The effect of various parameters such as pH, adsorbent amount, flow rate, influent dye concentration, and adsorbent bed height on adsorption performance of S₁₀₀ was studied and modelled using Langmuir/Freundlich isotherms for static operations and Adam-Bohart/Thomas model in packed-bed column experiments. Under optimum conditions, the adsorbent showed a remarkably higher adsorption capacity towards CR (1666.67 mg/g), which is considerably higher than most PEI-based adsorbents. Amine groups in S₁₀₀ offered exceptional selectivity for anionic Congo red (CR) against cationic Methylene blue (MB) dye (separation factor of 208 and 87 in absence and presence of sodium chloride, respectively). It can be easily regenerated in alkaline medium without a significant loss in percent adsorption capacity and shows good thermal and mechanical stability. Notably, in column studies, a relatively smaller percentage of unused bed height (32.3%) was observed with higher dye uptake for 16 mg S₁₀₀ at flow rate 10 mL/h and inlet concentration 300 mg/L. Thus, the adsorbent displays an outstanding physiochemical characteristic, excellent selectivity for anionic dye, ease of regeneration and high adsorption performance in both batch and continuous studies.

Highly efficient poly(6-acryloylamino-N-hydroxyhexanamide) resin for adsorption of heavy metal ions

Heavy metal wastewater pollution has become an ecological challenge worldwide. This study reports the development of a novel poly (6-acryloylamino-N-hydroxyhexanamide) (PAHHA) resin for effective adsorption of heavy metal ions, including Cu²⁺, Pb²⁺ and Ni²⁺. The chelating resin was synthesized by the grafting reaction between 6-amino-N-hydroxyhexanamide and polyacrylic resin, thus containing the hydroxamate and acylamino groups. The batch adsorption experiments revealed that the PAHHA resin exhibited an excellent adsorption performance for Cu²⁺, Pb²⁺ and Ni²⁺. The maximum adsorption capacities of Cu²⁺, Pb²⁺ and Ni²⁺ were determined to be 238.59, 232.48 and 115.77 mg·g^-1, respectively. Based on the adsorption kinetics, the pseudo-second-order kinetic model was noted to fit well for all metal ions. The metal ion concentration as a function of the equilibrium adsorption capacity fitted well with the Langmuir isotherm, thus indicating the single layer adsorption process. The adsorption mechanism was investigated by using Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), density functional theory (DFT) calculations, X-ray photoelectron spectroscopy (XPS) and adsorption isotherms. It was revealed that the PAHHA resin possessed multiple active sites, including -CONHOH, -CONH- and -COOH, which could strongly adsorb the metal ions. Specifically, the -CONHOH group displayed a high affinity by forming a stable five-membered ring with heavy metal ions. Overall, the developed resin exhibits advantages such as simple synthesis, inexpensive raw material and good recyclability, along with high adsorption ability, thus providing a new approach for efficiently treating wastewater contaminated with heavy metal ions.

Valorization of food waste as adsorbents for toxic dye removal from contaminated waters: A review

Industrial contaminants such as dyes and intermediates are released into water bodies, making the water unfit for human use. At the same time large amounts of food wastes accumulate near the work places, residential complexes etc. polluting the air due to putrefaction. The need of the hour lies in finding innovative solutions for dye removal from wastewater streams. In this context, the article emphasizes adoption or conversion of food waste materials, an ecological nuisance, as adsorbents for the removal of dyes from wastewaters. Adsorption, being a well-established technique, the review critically examines the specific potential of food waste constituents as dye adsorbents. The efficacy of food waste-based adsorbents is examined, besides addressing the possible adsorption mechanisms and the factors affecting phenomenon such as pH, temperature, contact time, adsorbent dosage, particle size, and ionic strength. Integration of information and communication technology approaches with adsorption isotherms and kinetic models are emphasized to bring out their role in improving overall modeling performance. Additionally, the reusability of adsorbents has been highlighted for effective substrate utilization. The review makes an attempt to stress the valorization of food waste materials to remove dyes from contaminated waters thereby ensuring long-term sustainability.

Plasma-assisted in-situ preparation of graphene-Ag nanofiltration membranes for efficient removal of heavy metal ions

Graphene-based membranes have been considered as promising separation membranes for water treatments due to their unique two-dimensional confined channels. However, subject to the preparation technology, the effective construction of graphene-based filtration membranes with suitable separation ability on heavy metal ions still face considerable challenges. Herein, we have successfully constructed a kind of graphene-based (reduced graphene oxide, rGO) nanofiltration membranes by adopting a plasma-assisted in-situ photocatalytic reduction method. Graphene oxide-Ag (GO-Ag) composite sheets are prepared firstly and then assembled into membranes by vacuum filtration. With the use of Ag nanoparticles as plasmonic photocatalyst, GO-Ag films can be in-situ reduced, leading to the formation of rGO-based composite membranes. Thanks to the mild in-situ reduction process, the filtration ability on heavy metal ions (Cr(VI), Cr³⁺, Cu²⁺ and Pb²⁺) caused by lamellar structure is well retained in the as-formed rGO-Ag membranes. Especially, when treating the typical toxic Cr(VI) solution, the retention capacity, water flux and stability of rGO-Ag membranes are all improved compared with that of the original GO-Ag ones. In addition, the effectively rejection of Cr(VI) from mixed solutions containing both Cr(VI) and Cr(III) also suggests the good applicability of such rGO-Ag membranes in a complex wastewater system.

Development of nanoporous textile sludge based adsorbent for the dye removal from industrial textile effluent

The development of a novel textile sludge based activated carbon (TSBAC) adsorbent and its performance for the treatment of textile dyeing effluent, have been explained in this paper. TSBAC was prepared by the thermal treatment of textile effluent treatment sludge followed by the chemical activation using phosphoric acid. Characterization of TSBAC resulted in enhanced specific surface area (123.65 m²/g) along with the presence of active surface functional groups including -OH, -COOH, -CO. TSBAC showed superior adsorption capacity for methylene blue (123.6 mg/g), reactive red 198 (101.4 mg/g), and reactive yellow 145 (96.8 mg/g) individually, and from the synthetic textile effluent (106 mg/g). The pseudo-second order model and Langmuir isotherm model were found to be fitted well with batch experimental data. The results of the continuous column studies showed that adsorption capacity for methylene blue, reactive red 198, reactive yellow 145 are 101.8 mg/g, 76.6 mg/g, and 75.1 mg/g respectively, and the synthetic textile effluent resulted in an adsorption capacity value of 79.1 mg/g. The reuse potential of TSBAC was proved by effective dye removal up to six reuse cycles. The leachability studies proved that the used adsorbent could be safely disposed of without any harmful effect to the environment.

Sustainable ecofriendly recruitment of bioethanol fermentation lignocellulosic spent waste biomass for the safe reuse and discharge of petroleum production produced water via biosorption and solid biofuel production

Sustainable lignocellulosic spent waste rice straw (SWRS) from bioethanol production inventively applied in this study to valorize petroleum production produced water (PPPW). SWRS expressed efficient pollutant removal over a wide range of petroleum concentration, temperature, pH, salinity, and mixing rate reaching approximately 217 mg/g, within four hours contact time. Kinetic studies revealed a pseudo-second-order chemisorption process with a boundary layer control and 16.97 kJ/mol activation energy where the intra-particle diffusion was not the only rate regulatory step. Thermodynamic studies revealed spontaneous, favorable, and endothermic adsorption, with a strong affinity between the SWRS and oil molecules. Biosorption mechanism studies proved the enrollment of SWRS components' lignin, cellulose, and hemicellulose in the oil uptake with the predominance of chemisorption over physisorption onto the rough and highly porous SWRS surface. A single-stage batch biosorption process was designed based on the best fitted Langmuir adsorption isotherm and applied on a real PPPW sample. The Egyptian standard limits for safe industrial effluents discharge into marine environment with a concomitant decrease in scale formation precursors were achieved recommending its safe reuse for enhanced oil recovery. Finally, for accomplishing zero-waste, SWRS disposed of PPPW treatment substantiated valorized solid biofuel with a sufficient calorific value 38.56 MJ/kg.

Green synthesis of a novel functionalized chitosan adsorbent for Cu(II) adsorption from aqueous solution

Pollution generated by heavy metals has become a global environmental issue with much public concern. Herein, a functionalized chitosan-based adsorbent (CS-PAR) was synthesized via a simple one-step method for the adsorption of copper ions in solutions. A series of characterization methods have shown that CS-PAR was successfully synthesized. The experimental results showed that the maximum adsorption capacity of CS-PAR for Cu(II) ions was 170.23 mg/g. The adsorption process of Cu(II) on CS-PAR conformed to Langmuir and pseudo second-order models and belonged to a single-layer chemical adsorption process on the surface of a homogeneous medium. The adsorption mechanism of the adsorbent to Cu(II) ions was the complexation between the N-containing functional groups existing on the surface of the adsorbent and Cu(II). These results also showed that the adsorbent was an efficient material for removing heavy metal copper in wastewater and had very important practical significance.

Investigation the adsorption behavior of functional biochar-based porous composite for efficient removing Cu(Ⅱ) in aqueous solution

Biochar was modified by acylation reaction using EDTA. Then, a novel biochar-based porous composite was prepared successfully using modified biochar as base to remove Cu(Ⅱ) in wastewater. In addition, functional...

Equilibrium, Kinetic, and Thermodynamic Studies of Cationic Dyes Adsorption on Corn Stalks Modified by Citric Acid

The modification of agricultural wastes and their use as low-cost and efficient adsorbents is a prospective pathway that helps diminish waste and decrease environmental problems. In the present research, the natural adsorption capacity of corn stalks (CS) was improved by modification of their surface with citric acid. The adsorption capacity of the modified corn stalks (CS-C) was determined with the help of cationic dyes (methylene blue and malachite green). The equilibrium, kinetics, and thermodynamics of the cationic dyes on CS-C were studied. The Langmuir isotherm model best fitted the data both for methylene blue and malachite green adsorption on CS-C. The adsorption kinetics of the cationic dyes was well described by the pseudo-second order model. Thermodynamic studies revealed that adsorption of the cationic dyes on CS-C was an endothermic process. Negative results of ΔGo (between −31.8 and −26.3 kJ mol−1) indicated that the adsorption process was spontaneous in all the tested temperatures. The present study verified that citric acid-modified corn stalks can be used as a low-cost and effective adsorbent for removal of cationic dyes from aqueous solutions.

A review on adsorptive separation of toxic metals from aquatic system using biochar produced from agro-waste

Water is a basic and significant asset for living beings. Water assets are progressively diminishing due to huge populace development, industrial activities, urbanization and rural exercises. Few heavy metals include zinc, copper, lead, nickel, cadmium and so forth can easily transfer into the water system either direct or indirect activities of electroplating, mining, tannery, painting, fertilizer industries and so forth. The different treatment techniques have been utilized to eliminate the heavy metals from aquatic system, which includes coagulation/flocculation, precipitation, membrane filtration, oxidation, flotation, ion exchange, photo catalysis and adsorption. The adsorption technique is a better option than other techniques because it can eliminate heavy metals even at lower metal ions concentration, simplicity and better regeneration behavior. Agricultural wastes are low-cost biosorbent and typically containing cellulose have the ability to absorb a variety of contaminants. It is important to note that almost all agro wastes are no longer used in their original form but are instead processed in a variety of techniques to improve the adsorption capacity of the substance. The wide range of adsorption capacities for agro waste materials were observed and almost more than 99% removal of toxic pollutants from aquatic systems were achieved using modified agro-waste materials. The present review aims at the water pollution due to heavy metals, as well as various heavy metal removal treatment procedures. The primary objectives of this research is to include an overview of adsorption and various agriculture based adsorbents and its comparison in heavy metal removal.

Mussel-inspired triple bionic adsorbent: Facile preparation of layered double hydroxide@polydopamine@metal-polyphenol networks and their selective adsorption of dyes in single and binary systems

To effectively address the serious human health challenges and ecological damage caused by organic dyes in wastewater, we developed a novel bionic adsorbent (LDH@PDA@MPNs) for the selective adsorption and removal of malachite green (MG) and crystalline violet (CV). The adsorbent was prepared using a facile two-step method based on mussel-inspired chemistry and metal complexation. The physicochemical structure, surface morphology, and composition of the LDH@PDA@MPNs were characterized by scanning electron microscopy, Fourier-transform infrared spectrometry, X-ray photoelectron spectroscopy, and thermogravimetric analysis. Adsorption of MG and CV with the LDH@PDA@MPNs was evaluated. Under optimal conditions, the maximum adsorption of MG and CV by the adsorbent was 89.608 and 40.481 mg/g, respectively. The adsorption kinetics showed that the experimental data were in good agreement with the pseudo-second-order kinetic model, and the equilibrium adsorption isotherm data fitted well with the Freundlich model. The thermodynamic results indicated that the adsorption of the dyes on LDH@PDA@MPNs was a spontaneous endothermic process. Importantly, the bionic adsorbent not only shows high removal efficiency by easy regeneration with low-cost reagents but also exhibits high selectivity for dyes in both single and binary systems. Therefore, LDH@PDA@MPNs have the potential to adsorb and remove dyes from complex wastewater solutions.

A critical review on the interactions of microplastics with heavy metals: Mechanism and their combined effect on organisms and humans

Although individual toxicity of microplastics (MPs) to organism has been widely studied, limited knowledge is available on the interactions between heavy metals and MPs, as well as potential biological impacts from their combinations. The interaction between MPs and heavy metals may alter their environmental behaviors, bioavailability and potential toxicity, leading to ecological risks. In this paper, an overview of different sources of heavy metals on MPs is provided. Then the recent achievements in adsorption isotherms, adsorption kinetics and interaction mechanism between MPs and heavy metals are discussed. Besides, the factors that influence the adsorption of heavy metals on MPs such as polymer properties, chemical properties of heavy metals, and other environmental factors are also considered. Furthermore, potential combined toxic effects from MPs and heavy metals on organisms and human health are further summarized.

Dual lignin-derived polymeric systems for hazardous ion removals

The functionalization of lignin derivatives for ion removals is a promising method to expedite their use in treating industrial wastewater. In this work, kraft lignin (KL) was polymerized with [2-(methacryloyloxy)ethyl]trimethylammonium methyl sulfate (METAM) or acrylic acid (AA) in an acidic aqueous suspension system to produce cationic and anionic water-soluble lignin polymers with high molecular weights. Then, the interaction of soluble ions and KL-METAM and KL-AA was investigated using a Quartz crystal microbalance (QCM) and a vertical scan analyzer (VSA). The QCM, X-ray photoelectron spectroscopy (XPS) and contact angle measurement results showed that the adsorption efficiency of KL-AA was better than KL-METAM for ions due to the stronger electrostatic interaction, cationic π-interaction, and chelation between ions and KL-AA. Based on adsorption, sedimentation, and aggregate size analyses, the dual polymer systems of KL-AA/KL-METAM were more effective than KL-METAM/KL-AA in removing ions. Among Zn²⁺, Cu²⁺, and K⁺; Zn²⁺ interacted more effectively with polymers in all scenarios because it has higher reactivity for interacting with other elements. As the efficiency of ion removals was more remarkable than past reported findings, the system of KL-AA/KL-METAM may be a promising alternative for the removal of dissolved ions from solutions.

Synthesis of polystyrene-based hyper-cross-linked polymers for Cd(II) ions removal from aqueous solutions: Experimental and RSM modeling

The hyper-cross-linked polymers (HCPs) based on the polystyrene was synthesized during the Friedel-Craft reaction in various situations. The HCPs synthesis were carried out in various operating conditions including reaction time in the range of 3-23 h, the ratio of cross-linker to monomer in range of 1-5 at temperature of 80 ℃. In addition, the cadmium adsorption process was carried out at a temperature in the range of 25-85 ℃ and initial cadmium concentration in the range of 10-100 mg/L. The response surface methodology (RSM) has been applied for optimizing the process using synthesis and adsorption parameters. The optimized synthesis conditions were obtained 3.32, 11.26 h, 80 ℃, in ratio, synthesis time, and temperature, respectively. Also, the optimized adsorption conditions were obtained 80 mg/L and 35 ℃, initial cadmium ion concentration, and temperature, respectively. The surface area and thermal stability were obtained at 853.89 m²/g and 450 ℃, respectively. The maximum adsorption capacity and removal efficiency had been obtained 950 mg/g and 92% at a temperature of 20 ℃, after 80 min, respectively. The maximum adsorption capacity and removal efficiency were observed in the initial concentration of 120 mg/L and 10 mg/L, respectively. The adsorption process behavior was surveyed using isotherm, kinetic and thermodynamic models. The isotherm results showed that the adsorption of cadmium by HCPs is multi-layer and heterogeneous. The thermodynamic parameters showed that the process is exothermic and spontaneous. Finally, the kinetic results showed that the process occurred physically and slowly as the temperature raised.

PEG/Sodium Tripolyphosphate-Modified Chitosan/Activated Carbon Membrane for Rhodamine B Removal

Textile dyes from wastewater effluent are highly toxic to both living species and aqueous environments. An environmentally friendly method to remove hazardous dyes from wastewater in the textile industry has been a challenge. Chitosan (CS) and activated carbon (AC) are widely used as adsorbents for dye removal. However, the poor porosity and unsatisfactory stability of CS and the unfriendly cost of AC limited their applications to be used alone as a single adsorbent. Here, we report a novel method to prepare a CS/AC membrane using PEG10000 as a porogen and sodium tripolyphosphate (TPP) as a cross-linking agent. The adsorption efficiency and reusability of the PEG/TPP-modified CS/AC membrane to remove RhB were investigated based on dynamic and static adsorption models. The results reveal that the adsorption performance of CS/AC membranes was significantly improved after the PEG/TPP modification based on the abundance macroporous structure. The modified CS/AC membrane with a 30% AC doping ratio exhibited an excellent adsorption efficiency of 91.29 and 73.91% in the dynamic and static adsorption processes, respectively. These results provide new insights into designing membranes to remove dyes from wastewater efficiently.