An insight into toxicity and human-health-related adverse consequences of cosmeceuticals - A review

The controversies of parabens - an overview nowadays

Effects of paraben toxicity, i.e., endocrine-disruption properties, are in the focus of researchers for decades, but still - they are a hot subject of debate. Parabens are aliphatic esters of p-hydroxybenzoic acid, which are widely used as antimicrobial agents for the preservation of cosmetics, pharmaceuticals and foods. Mostly used parabens are methyl-, ethyl-, propyl- and butylparaben. Although the toxicity of parabens is reported in animals and in in vitro studies, it cannot be taken for granted when discussing hazards for human health due to an unrealistic exposure -safety profile. Many studies have demonstrated that parabens are non-teratogenic, non-mutagenic, non-carcinogenic and the real evidence for their toxicity in humans has not been established. For now, methyl-, ethyl- and propylparaben are considered safe for use in cosmetics and pharmaceuticals within the recommended range of doses. Regarding alternatives for parabens, a variety of approaches have been proposed, but every substitute would need to be tested rigorously for toxicity and safety.

Enhanced Biofilm Eradication and Reduced Cytotoxicity of a Novel Polygalacturonic and Caprylic Acid Wound Ointment Compared with Common Antiseptic Ointments

Antiseptic wound ointments are widely used to treat dermal wounds that are microbially contaminated. Polygalacturonic acid (PG)+caprylic acid (CAP) is a novel combination that has been shown to eradicate biofilms. We developed a novel PG+CAP ointment and compared the biofilm eradication capability and cytotoxicity of PG+CAP with that of commercially available antiseptic wound ointments. We used a well-established biofilm model to quantitatively assess the eradication of organisms following exposure to the wound ointments for 2 hours. PG+CAP ointment completely eradicated Candida albicans, multidrug-resistant Pseudomonas aeruginosa, and methicillin-resistant Staphylococcus aureus biofilms, whereas MediHoney, polyhexamethylene biguanide (PHMB), and benzalkonium chloride (BZK) ointments failed to eradicate all biofilms within 2 hours. We assessed cytotoxicity by exposing L-929 fibroblasts to extracts of each ointment; Trypan blue exclusion was used to assess cell viability, and Alamar blue conversion was used to assess metabolic function. After exposure to PG+CAP and MediHoney, fibroblast viability was 96.23% and 95.23%, respectively (Trypan blue), and was comparable to untreated cells (98.77%). PHMB and BZK showed reduced viability (83.25% and 77.83%, respectively, p < 0.05). Metabolic activity results followed a similar pattern. Cytotoxicity of PG+CAP ointment towards erythrocytes was comparable to saline. PG+CAP ointment seems to be safe and can rapidly eradicate microbial biofilm; thus, PG+CAP ointment merits further in vivo testing as a potential antimicrobial wound ointment.

The Human Tissue-Engineered Cornea (hTEC): Recent Progress

Each day, about 2000 U.S. workers have a job-related eye injury requiring medical treatment. Corneal diseases are the fifth cause of blindness worldwide. Most of these diseases can be cured using one form or another of corneal transplantation, which is the most successful transplantation in humans. In 2012, it was estimated that 12.7 million people were waiting for a corneal transplantation worldwide. Unfortunately, only 1 in 70 patients received a corneal graft that same year. In order to provide alternatives to the shortage of graftable corneas, considerable progress has been achieved in the development of living corneal substitutes produced by tissue engineering and designed to mimic their in vivo counterpart in terms of cell phenotype and tissue architecture. Most of these substitutes use synthetic biomaterials combined with immortalized cells, which makes them dissimilar from the native cornea. However, studies have emerged that describe the production of tridimensional (3D) tissue-engineered corneas using untransformed human corneal epithelial cells grown on a totally natural stroma synthesized by living corneal fibroblasts, that also show appropriate histology and expression of both extracellular matrix (ECM) components and integrins. This review highlights contributions from laboratories working on the production of human tissue-engineered corneas (hTECs) as future substitutes for grafting purposes. It overviews alternative models to the grafting of cadaveric corneas where cell organization is provided by the substrate, and then focuses on their 3D counterparts that are closer to the native human corneal architecture because of their tissue development and cell arrangement properties. These completely biological hTECs are therefore very promising as models that may help understand many aspects of the molecular and cellular mechanistic response of the cornea toward different types of diseases or wounds, as well as assist in the development of novel drugs that might be promising for therapeutic purposes.

Synthetic Organic Compounds From Paper Industry Wastes: Integrated Biotechnological Interventions

Synthetic organic compounds (SOCs) are reported as xenobiotics compounds contaminating the environment from various sources including waste from the pulp and paper industries: Since the demand and production of paper is growing increasingly, the release of paper and pulp industrial waste consisting of SOCs is also increasing the SOCs' pollution in natural reservoirs to create environmental pollution. In pulp and paper industries, the SOCs viz. phenol compounds, furans, dioxins, benzene compounds etc. are produced during bleaching phase of pulp treatment and they are principal components of industrial discharge. This review gives an overview of various biotechnological interventions for paper mill waste effluent management and elimination strategies. Further, the review also gives the insight overview of various ways to restrict SOCs release in natural reservoirs, its limitations and integrated approaches for SOCs bioremediation using engineered microbial approaches. Furthermore, it gives a brief overview of the sustainable remediation of SOCs via genetically modified biological agents, including bioengineering system innovation at industry level before waste discharge.

Extracts of medicinal plants with natural deep eutectic solvents: enhanced antimicrobial activity and low genotoxicity

Natural deep eutectic solvents (NADES) are a new alternative to toxic organic solvents. Their constituents are primary metabolites, non-toxic, biocompatible and sustainable. In this study four selected NADES were applied for the extraction of two medicinal plants: Sideritis scardica, and Plantago major as an alternative to water-alcohol mixtures, and the antimicrobial and genotoxic potential of the extracts were studied. The extraction efficiency was evaluated by measuring the extracted total phenolics, and total flavonoids. Best extraction results for total phenolics for the studied plants were obtained with choline chloride-glucose 5:2 plus 30% water; but surprisingly these extracts were inactive against all tested microorganisms. Extracts with citric acid-1,2-propanediol 1:4 and choline chloride-glycerol 1:2 showed good activity against S. pyogenes, E. coli, S. aureus, and C. albicans. Low genotoxicity and cytotoxicity were observed for all four NADES and the extracts with antimicrobial activity. Our results confirm the potential of NADESs for extraction of bioactive constituents of medicinal plants and further suggest that NADES can improve the effects of bioactive extracts. Further studies are needed to clarify the influence of the studied NADES on the bioactivity of dissolved substances, and the possibility to use such extracts in the pharmaceutical and food industry.

A perspective on the safety of parabens as preservatives in wound care products

Antimicrobial and/or preservative ingredients incorporated in wound care products are subjected to certain safety restrictions. However, several of those agents, and paraben preservatives in particular, have been criticised. Conflicting reports on the potential of parabens to induce allergic contact dermatitis, and their assumed oestrogen‐like activity, raised public health concerns about their overall safety. Here, we seek to provide a balanced perspective on the most significant purported adverse health effects, and thereby allay the many misconceptions regarding the safety of parabens. Extensive and long‐term monitoring of paraben allergy frequencies illustrate that allergic reactions are quite uncommon, especially when compared with other antimicrobial and preservative agents. The estrogenic potential of parabens was illustrated to be far less potent than that of natural oestrogen receptor ligands, and the etiological significance of their presence in human tissue has not been established. The general consensus based on investigations by both the scientific community and regulatory agencies indicates that, with current safety regulations regarding their use in place, this effective and well‐documented group of preservatives should not warrant drastic measures to replace them. As such, despite the ongoing concern, it is indicated that, when used at typical concentrations, parabens are unlikely to affect human health.

Unexpected effect of ozone on the paraben's mixture degradation using TiO2 supported nanotubes

Titanium dioxide can present advantages when coupled with ozonation. Moreover, the catalytic ozonation can be enhanced by radiation. The main disadvantage of this technology is the use of a suspended catalyst entailing a separation step. Thus, catalytic ozonation was analysed using supported TiO₂ nanotubes prepared by anodization at different voltages. The effect of different radiation sources on the catalytic ozonation of parabens was tested. The increase on voltage preparation led to plates with higher surface areas from 60 to 280 cm². However, this did not improve the parabens mixture degradation during UVA photocatalytic ozonation. The use of sunlight radiation allows a significant reduction in terms of time necessary for total parabens degradation from 15 to 10 min. However, the amount of ozone required doubles. Catalytic ozonation presents worst results than single ozonation. This means that molecular ozone is the main responsible for degradation. No dissolved ozone was detected at the experiments with supported nanotubes which could mean that it was adsorbed on the catalysts surface decreasing the degradation rates. The presence of municipal wastewaters as matrix inhibited parabens degradation for both single and catalytic ozonation, mainly due to the trapping ozone effect. In fact, for the TOD of 4.5 mg/L it was just possible to remove about 80% of parabens when MWW compared to 100% when UP was used. Even so, the presence of supported nanotubes during ozonation seems to be required to reduce the toxicity of the resultant treated effluent. In fact, the wastewater luminescence inhibition decreased (from 100 to 43%) and germination index increased (from 7 to 97%) with catalytic ozonation which may enable treated water reuse.

Insight into the mechanism of urea inhibit ovalbumin-glucose glycation by conventional spectrometry and liquid chromatography-high resolution mass spectrometry

The inhibition effect of urea on ovalbumin (OVA) glycation was investigated, and the mechanism was evaluated through the changes in protein structure as well as glycation sites and average degree of substitution per peptide molecule (DSP) by conventional spectrometry and liquid chromatography-high resolution mass spectrometry (LC-HRMS). A urea concentration of 3 M was chosen as the optimum condition. Ultraviolet and fluorescence spectra suggested that both glycation and urea treatment could unfold the OVA, but urea inhibited the glycation-induced protein unfolding. Circular dichroism spectra showed that urea treatment could increase the β-sheet content and reduce the α-helix content of OVA. LC-HRMS indicated that the number of glycation sites was reduced from 15 to 3, and DSP values decreased with urea treatment. In conclusion, urea could significantly inhibit the OVA-glucose glycation, and the sites competition as well as structure unfolding inhibition resulted from urea could be the main factors.

A fast-multiclass method for the determination of 21 endocrine disruptors in human urine by using vortex-assisted dispersive liquid-liquid microextraction (VADLLME) and LC-MS/MS

Simplicity, speed, and reduced cost are essential demands for routine analysis in human biomonitoring studies. Moreover, the availability of higher volumes of human specimens is becoming more restrictive due to ethical controls and to the costs associated with sample transportation and storage. Thus, analytical methods requiring much lower sample volumes associated with simultaneous detection capability (multiclass analysis) are with a very high claim. In this sense, the present approach aimed at the development of a method for preconcentration and simultaneous determination of four classes of endocrine disruptors (seven bisphenols, seven parabens, five benzophenones, and two antimicrobials) in the urine. The approach is based on vortex-assisted dispersive liquid-liquid microextraction (VADLLME) and high-performance liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). After optimization of the significant parameters of VADLLME extraction, the proposed procedure showed to be simple, fast, sensitive, requiring only 1.0 mL of urine, 400 μL of organic solvents with a total stirring time of 20 s. Moreover, a variation of inter-day and between-day runs were lower than 10.0% and 11.0%, respectively. Finally, the proposed method was successfully applied to the analysis of 50 urine samples of Brazilian pregnant women to establish reference ranges.

Persistence, ecological risks, and oxidoreductases-assisted biocatalytic removal of triclosan from the aquatic environment

Triclosan (TCS) has been immensely employed in health care products and consumer items, as an active agent with fungicidal and bactericidal potentialities, such as soaps, sanitizers, tubes of toothpaste, deodorants, skin creams, and so on for over last five decades. The ultimate excretory route of TCS ends in our water matrices, thus has been frequently detected with ecological and human-health related matters and hazards. Bioactive residues of TCS reach into the key atmosphere compartment through numerous routes, such as (1) scarce or ineffective elimination or degradation throughout the treatment practices, (2) abandoned landfill leachates, (3) leakage from the discarded TCS-containing materials, and so on. Such persistence and occurrence of TCS or its degraded but bioactive residues have growing attentions. Its complete removal and/or effective prevention are still challenging tasks for safeguarding the environment. Owing to the highly effective catalytic and stability potential, enzyme-based bio-degradation approaches are considered an evocative substitute for TCS mitigation from environmental matrices. As compared to enzymes in their pristine form, immobilized enzymes, with unique catalytic, stability, selectivity, and reusability profile, are of supreme and strategic interest in environmental biotechnology. Herein, an effort has been made to signify the novel bio-catalytic and bio-degradation potentialities of various oxidoreductases, including laccases, and peroxidases including soybean peroxidase, versatile manganese peroxidase, and horseradish peroxidase with suitable examples. Following a brief introduction, the focus is given to the presence of TCS in the key atmosphere compartments. Potential sources, acquaintance, and hazardous influence of TCS are also discussed with recent and relevant examples. The second half shows the TCS removal/degradation potentialities of soluble enzyme-based catalytic systems and immobilized-enzyme-based catalytic systems. Finally, the concluding remarks, along with possible future directions are given in this significant research arena.

Enhanced decomposition of H2O2 by molybdenum disulfide in a Fenton-like process for abatement of organic micropollutants

Accelerating the rate-limiting step of Fe³⁺/Fe²⁺ conversion is a major challenge for H₂O₂ decomposition in conventional Fenton process. In this study, the catalytic mechanism of H₂O₂ by molybdenum disulfide (MoS₂) nanoparticles and Fe³⁺ ions was revealed and the abatement of organic micropollutants was investigated. The presence of both MoS₂ and Fe³⁺ can efficiently decompose H₂O₂. Reaction system of H₂O₂/MoS₂/Fe³⁺ is found to remove most of the tested pollutants by over 80% (except 65.9% for carbamazepine) within 60 min at pH of 3.0. Effective pH range of this reaction system can be extended to pH of 5.0. Adding MoS₂ to Fe³⁺/H₂O₂ system promotes the Fe³⁺/Fe²⁺ cycle and improves the reaction rate between Fe³⁺ and H₂O₂. The formation of Mo⁶⁺ ions and Mo⁶⁺ peroxo-complexes is beneficial to H₂O₂ decomposition and pollutant degradation. Electron paramagnetic resonance (EPR) measurements and quenching experiments confirm the important role of hydroxyl radicals in H₂O₂/MoS₂/Fe³⁺ system. Chloride ions (Cl^-) promote degradation, while bicarbonate ions (HCO₃^-) inhibit degradation. As H₂O₂ concentration increases from nil to 1.0 mM, the value of total EE/O decreases from 0.083 to 0.003 kWh L^-1, and the most energy efficient condition is determined. This study provides a new pathway for efficient decomposition of H₂O₂ by Fe³⁺ ions in an extended pH range, which is considered a facile and promising strategy for wastewater treatment.

Lipophilic Arginine Esters: The Gateway to Preservatives without Side Effects

This study hypothesized that long carbon chain cationic arginine (Arg) esters can be considered as toxicologically harmless preservatives. Arg-esters with C₁₈ and C₂₄ carbon chains, namely, arginine-oleate (Arg-OL) and arginine-decyltetradecanoate (Arg-DT), were synthesized. Structures were confirmed by FT-IR, ¹H NMR, and mass spectroscopy. Both Arg-esters were tested regarding hydrophobicity in terms of log P_{octanol/water}, critical micelle concentration (CMC), biodegradability, cytotoxicity, hemolysis, and antimicrobial activity against Escherichiacoli (E. coli), Staphylococcusaureus (S. aureus), Bacillussubtilis (B. subtilis), and Enterococcusfaecalis (E. faecalis). Log P_{octanol/water} of arginine was raised from −1.9 to 0.3 and 0.6 due to the attachment of C₁₈ and C₂₄ carbon chains, respectively. The critical micelle concentration of Arg-OL and Arg-DT was 0.52 and 0.013 mM, respectively. Both Arg-esters were biodegradable by porcine pancreatic lipase. In comparison to the well-established antimicrobials, benzalkonium chloride (BAC) and cetrimide, Arg-esters showed significantly less cytotoxic and hemolytic activity. Both esters exhibited pronounced antimicrobial properties against Gram-positive and Gram-negative bacteria comparable to that of BAC and cetrimide. The minimum inhibitory concentration (MIC) of Arg-esters was <50 μg mL^–1 against all tested microbes. Overall, results showed a high potential of Arg-esters with long carbon chains as toxicologically harmless novel preservatives.

Mitigation of environmentally-related hazardous pollutants from water matrices using nanostructured materials - A review

An unprecedented rise in population growth and rapid worldwide industrial development are associated with the increasing discharge of a range of toxic and baleful compounds. These toxic pollutants including dyes, endocrine-disrupters, heavy metals, personal care products, and pharmaceuticals are destructing nature's balance and intensifying environmental toxicity at a disquieting rate. Therefore, finding better, novel and more environmentally sound approaches for wastewater remediation are of great importance. Nanoscale materials have opened up some new horizons in various fields of science and technology. Among a range of treatment technologies, nanostructured materials have recently received incredible interest as an emerging platform for wastewater remediation owing to their exceptional surface-area-to-volume ratio, unique electrical and chemical properties, quantum size effects, high scalability, and tunable surface functionalities. An array of nanomaterials including noble metal-based nanostructures, transition metal oxide nanomaterials, carbon-based nanomaterials, carbon nanotubes, and graphene/graphene oxide nanomaterials to their novel nanocomposites and nanoconjugates have been attempted as the promising catalysts to overcome environmental dilemmas. In this review, we summarized recent advances in nanostructured materials that are particularly engineered for the remediation of environmental contaminants. The toxicity of various classes of relevant tailored nanomaterials towards human health and the ecosystem along with perspectives is also presented. In our opinion, an overview of the up-to-date advancements on this emerging topic may provide new ideas and thoughts for engineering low-cost and highly-efficient nanostructured materials for the abatement of recalcitrant pollutants for a sustainable environment.

Skin irritation potential of cosmetic preservatives: An exposure-relevant study

BACKGROUND

Preservatives represent one of the main causes of skin irritation and contact allergies.

AIMS

To comprehensively evaluate the skin irritation potential of phenoxyethanol, methylparaben, propylparaben, imidazolidinyl urea, and DMDM hydantoin under regulatory acceptable concentrations.

METHODS

A patch test and repeated open application test (ROAT) were applied to evaluate skin irritation in vivo. In vitro alternative methods consisting of the keratinocyte cytotoxicity assay, red blood cell (RBC) test, and hen's egg test-chorioallantoic membrane (HET-CAM) were performed to elucidate the mechanism of preservative-induced irritation responses.

RESULTS

The patch test showed that all test substances showed a weak erythema response. Propylparaben had the highest occlusive irritancy potential in the patch test, owing to damage to the cell membrane. The two formaldehyde releasers showed noticeable skin irritation potential in the ROAT through their cytotoxicity to keratinocytes, while a visible response was observed after applying phenoxyethanol and the two parabens. No filtration was noticed in the in vivo tests, which might be attributed to the failure of subcutaneous vessel alteration by the preservatives.

CONCLUSIONS

Commonly used cosmetic preservatives have minor skin irritation potential with mild erythema reaction under practical use, especially formaldehyde releasers and propylparaben.

Environmental threatening concern and efficient removal of pharmaceutically active compounds using metal-organic frameworks as adsorbents

An alarming number of contaminants of emerging concern, including active residues from pharmaceuticals and personal care products (PPCPs), are increasingly being introduced in water systems and environmental matrices due to unavoidable outcomes of modern-day lifestyle. Most of the PPCPs based contaminants are not completely eliminated during the currently used water/wastewater treatment processes. Therefore, highly selective and significant removal of PPCPs from environmental matrices remains a scientific challenge. In recent years, a wide range of metal-organic frameworks (MOFs) and MOF-based nanocomposites have been designed and envisioned for environmental remediation applications. MOF-derived novel cues had shown an adsorptive capability for the extraction and removal of an array of trace constituents in environmental samples. Noteworthy features such as substantial surface area, size, dispersibility, tunable structure, and repeated use capability provide MOFs-derived platform a superiority over in-practice conventional adsorptive materials. This review provides a comprehensive evaluation of the efficient removal or mitigation of various categories of PPCPs by diverse types of MOF-derived adsorbents with suitable examples. The growing research investigations in this direction paves the way for designing more efficient porous nanomaterials that would be useful for the elimination of PPCPs, and separation perspectives.

Efficient removal of parabens from real water matrices by a metal-free carbon nitride photocatalyst

Metal-free graphite-like carbon nitride (GCN-500) was obtained by thermal post-treatment of bulk polymeric carbon nitride at 500 °C. The catalyst was thoroughly characterized by morphological, optical and textural analysis techniques. The efficiency of GCN-500 was evaluated under visible (λ_exc = 417 nm) LED excitation for the photocatalytic degradation of methyl-, ethyl- and propyl-paraben in different water matrices either isolated or in a mixture of the three compounds. The GCN-500 proved to be more efficient than the benchmark TiO₂ P25, with complete conversion of the individual parabens within 20 min of irradiation, contrasting with 120 min needed for total degradation using TiO₂. Experiments in the presence of selected scavengers confirmed the high importance of superoxide radicals in the photocatalytic oxidation of parabens using GCN-500. The effect of the nature of the aqueous matrix in the kinetics of the photocatalytic process was assessed using ultrapure, tap and river waters spiked with a mixture of the three parabens. Although still very efficient, the complexity of the real water samples turned the degradation process slower due to the presence of other components such as ions and dissolved organic matter. GCN-500 proved to be stable in a continuous-flow system using GCN-500 coated glass rings (GCN-500-GR) to remove MP, EP and PP from real water matrices.

Photocatalytic Evaluation of Ag2CO3 for Ethylparaben Degradation in Different Water Matrices

The present study examines the photocatalytic properties of silver carbonate (Ag2CO3) for ethyl paraben (EP) degradation under simulated solar irradiation. Ag2CO3 was prepared according to a solution method and its physicochemical characteristics were studied by means of X-ray diffraction (XRD), the Brunauer–Emmett–Teller (BET) method, diffuse reflectance spectroscopy (DRS), and transmission electron microscopy (TEM). Complete EP (0.5 mg/L) removal was achieved after 120 min of irradiation with the use of 750 mg/L Ag2CO3 in ultrapure water (UPW), with EP degradation following pseudo-first-order kinetics. The effect of several experimental parameters was investigated; increasing catalyst concentration from 250 mg/L to 1000 mg/L led to an increase in EP removal, while increasing EP concentration from 0.25 mg/L to 1.00 mg/L slightly lowered kapp from 0.115 min−1 to 0.085 min−1. Experiments carried out with the use of UV or visible cut-off filters showed sufficient EP degradation under visible irradiation. A series of experiments were performed in real water matrices such as bottled water (BW) and wastewater (WW), manifesting Ag2CO3’s equally high photocatalytic activity for EP degradation. To interpret these results different concentrations of inorganic anions (bicarbonate 100–500 mg/L, chloride 100–500 mg/L) present in aqueous media, as well as 10 mg/L organic matter in the form of humic acid (HA), were added sequentially in UPW. Results showed accelerating effects on EP degradation for the lowest concentrations tested in all cases.

New Insights on Unique Features and Role of Nanostructured Materials in Cosmetics

The cosmetics industry has boomed in recent years as one of the markets that holds enormous growth potential. Among several industrial sectors, the cosmetics industry has considered nanotechnology-based principles and implemented in product management practices. Out of 1000 registered products available on the global market, up to 13% were referred to as products for cosmetic use. A large number of nanoscale materials with unique physicochemical properties are currently being used in the cosmetics formulations or recommended for future use as nano-systems or novel nanocarriers to encapsulate active ingredients for their efficient delivery through the skin barriers. These nano-systems have demonstrated potential in targeted-oriented drug delivery and offered remarkable features such as better stability, site-specificity, excellent encapsulation efficiency, prolonged action, enhanced skin penetration, and high drug-loading capability. Nevertheless, nanotoxicology research has raised concerns over the excessive use of nanomaterials/nanoparticles in cosmetics, as nanoparticles might enter the skin resulting in health problems. This review provides insights on the characteristic physicochemical features and the potential use of various nanostructured materials, including liposomes, noisome, nanoemulsions, nanoparticles, carbon nanomaterials (graphene, fullerenes), carbon nanotubes, dendrimers, and nanospheres in cosmeceuticals. Moreover, the regulatory aspects of nanomaterials in cosmetics, along with concluding remarks and outlook in this field, were also vetted.

Methylisothiazolinone response on disposable electrochemical platforms modified with carbon, nickel or gold-based nanomaterials

Screen-printed carbon electrodes (SPCE) were modified with nanocomposite membranes based on polystyrene sulfonate (PSS) or poly(diallyldimethylammonium) (PDDA) matrices and different nanomaterials. Carbon nano-powders (CnP), carbon nano-fibers (CnF) and multi-walled carbon nano-tubes (MWCNTs) were incorporated on PSS matrix. Nickel was incorporated by ion exchange in PSS-CnP composite membranes. Gold nanoparticles (AuNp) were photochemically and electrochemically synthesised and introduced into PDDA membranes. The electrochemical behaviour of methylisothiazolinone (MIT) using these modified electrodes was studied by cyclic voltammetry in 0.1 mol L^-1 NaOH. No electrochemical response is obtained on PSS-nanocarbon transducers at the assayed conditions. The nickel-based transducers allow the MIT identification but not quantification. Using AuNp-based electrochemical transducers, it is observed that in presence of MIT, the electron transfer for AuNp reduction is inhibited, and an oxidation peak appears at + 0.45 V, indicating an interaction between MIT and AuNp on the electrode surface. These facts support the usefulness of the AuNp-based electrodes for the determination of MIT. The intensity of the anodic peak observed at + 0.45 V vs. Ag/AgCl was used as analytical signal for MIT determination. A linear relationship between anodic peak current and MIT concentration is observed in the range 8.7 to 36 mg L^-1 using the transducer prepared by incorporating gold into the PDDA membrane by ion exchange and synthesising AuNp electrochemically. For this electrode, the limit of detection is 2.6 mg L^-1 and the reproducibility, expressed as relative standard deviation (RSD), is lower than 7%. Graphical abstractSchematic representation of the preparation of gold nanoparticles (AuNp) and poly(diallyldimethylammonium) (PDDA)-based platforms and methylisothiazolinone (MIT) electrochemical response on these nanostructured platforms.

Mitochondrial Dysfunctions May Be One of the Major Causative Factors Underlying Detrimental Effects of Benzalkonium Chloride

Benzalkonium chloride (BAC) is currently the most commonly used antimicrobial preservative in ophthalmic solutions, nasal sprays, and cosmetics. However, a large number of clinical and experimental investigations showed that the topical administration of BAC-containing eye drops could cause a variety of ocular surface changes, from ocular discomfort to potential risk for future glaucoma surgery. BAC-containing albuterol may increase the risk of albuterol-related systemic adverse effects. BAC, commonly present in personal care products, in cosmetic products can induce irritation and dose-dependent changes in the cell morphology. The cationic nature of BAC (it is a quaternary ammonium) suggests that one of the major targets of BAC in the cell may be mitochondria, the only intracellular compartment charged negatively. However, the influence of BAC on mitochondria has not been clearly understood. Here, the effects of BAC on energy parameters of rat liver mitochondria as well as on yeast cells were examined. BAC, being a "weaker" uncoupler, potently inhibited respiration in state 3, diminished the mitochondrial membrane potential, caused opening of the Ca2+/Pi-dependent pore, blocked ATP synthesis, and promoted H₂O₂ production by mitochondria. BAC triggered oxidative stress and mitochondrial fragmentation in yeast cells. BAC-induced oxidative stress in mitochondria and yeast cells was almost totally prevented by the mitochondria-targeted antioxidant SkQ1; the protective effect of SkQ1 on mitochondrial fragmentation was only partial. Collectively, these data showed that BAC acts adversely on cell bioenergetics (especially on ATP synthesis) and mitochondrial dynamics and that its prooxidant effect can be partially prevented by the mitochondria-targeted antioxidant SkQ1.

Cosmetics with hormonal composition for bioindicators Artemia salina L. and Allium cepa L. toxic potential

The emerging pollutants cover a wide range of synthetic chemicals that are indispensable to modern society but with little known effects for aquatic animals and for people who consume polluted waters with these products. Gels manipulated with hormones are widely used for hormone replacement, muscle growth, among other purposes. However, only a small part of these hormones are absorbed into the skin, and so these can be transferred to the domestic sewage during the washing of exposed body regions. Thus, the aim of this study was to evaluate the toxicity levels for the bioindicator Artemia salina L., and cytotoxicity and mutagenicity for the bioindicator Allium cepa L. of gels handled with 1% testosterone and 0.1% estradiol. Data from immobile/dead A. salina numbers after 24 h of exposure showed that the highest concentrations of testosterone (10 and 25 μg/mL) and the highest concentration of estradiol (15 μg/mL) were toxic to this bioindicator. For the bioindicator A. cepa, mitotic indices and chromosomal aberrations did not indicate statistical differences between the groups treated with the testosterone gels (1, 10, 50 μg/mL) and estradiol (0.03, 0.30, 1.5 μg/mL) and the control group. However, all concentrations of the testosterone-containing gel decreased the percentage of cell division in relation to the time 0 h of each treatment and to the time 24 h of the negative control. Therefore, it is concluded that rivers or aquatic environments can be polluted if wastewater with the toxic concentrations found of these hormonal gels is discarded without previous treatment, compromising the life of organisms that live there. And, it encourages the development of techniques for treating sewage and water to reduce/eliminate the hormones present in them.

Inhaled Kathon may induce eosinophilia-mediated disease in the lung

In 2011, a link between humidifier disinfectants and patients with idiopathic pulmonary fibrosis was identified in Korea, and Kathon was suggested as one of the causative agents. In this study, Kathon induced apoptotic cell death along with membrane damage at 24 h post-exposure. Additionally, on day 14 after a single instillation with Kathon, the total number of pulmonary cells and the levels of TNF-α, IL-5, IL-13, MIP-1α, and MCP-1α clearly increased in the lung of mice. The proportion of natural killer cells and eosinophils were significantly elevated in the spleen and the bloodstream, respectively, and the level of immunoglobulin (Ig) A, but not IgG, IgM, and IgE, dose-dependently increased. Therefore, we suggest that inhaled Kathon may induce eosinophilia-mediated disease in the lung by disrupting homeostasis of pulmonary surfactants. Considering that eosinophilia is closely related to cancer and fibrosis, further studies are needed to understand the relationship between them.

Anthropogenic contaminants of high concern: Existence in water resources and their adverse effects

Existence of anthropogenic contaminants (ACs) in different environmental matrices is a serious and unresolved concern. For instance, ACs from different sectors, such as industrial, agricultural, and pharmaceutical, are found in water bodies with considerable endocrine disruptors potency and can damage the biotic components of the environment. The continuous ACs exposure can cause cellular toxicity, apoptosis, genotoxicity, and alterations in sex ratios in human beings. Whereas, aquatic organisms show bioaccumulation, trophic chains, and biomagnification of ACs through different entry route. These problems have been found in many countries around the globe, making them a worldwide concern. ACs have been found in different environmental matrices, such as water reservoirs for human consumption, wastewater treatment plants (WWTPs), drinking water treatment plants (DWTPs), groundwaters, surface waters, rivers, and seas, which demonstrate their free movement within the environment in an uncontrolled manner. This work provides a detailed overview of ACs occurrence in water bodies along with their toxicological effect on living organisms. The literature data reported between 2017 and 2018 is compiled following inclusion-exclusion criteria, and the obtained information was mapped as per type and source of ACs. The most important ACs are pharmaceuticals (diclofenac, ibuprofen, naproxen, ofloxacin, acetaminophen, progesterone ranitidine, and testosterone), agricultural products or pesticides (atrazine, carbendazim, fipronil), narcotics and illegal drugs (amphetamines, cocaine, and benzoylecgonine), food industry derivatives (bisphenol A, and caffeine), and personal care products (triclosan, and other related surfactants). Considering this threatening issue, robust detection and removal strategies must be considered in the design of WWTPs and DWTPs.

Mitigation of bisphenol A using an array of laccase-based robust bio-catalytic cues - A review

Bisphenol A (BPA) is a known endocrine disruptor that poses concerning environmental and human-health related issues and ecological risks. It has been largely used as an intermediate in the manufacture of epoxy resins and polycarbonate plastics. Traces of BPA can reach into the environment through inadequate or inefficient removal during wastewater treatment, uncontrolled landfill leachates, and leaching out from the discarded BPA-based materials. Several physicochemical treatment methods including adsorption, Fenton, ozonation, electrochemical and photochemical degradation, and membrane filtration, have been applied for BPA elimination. However, these methods are not adequate for large-scale treatment due to some inherent limitations. Benefiting from high catalytic efficiency and specificity, enzyme-based bio-catalytic degradation strategies are considered quite meaningful alternative for efficient and effective BPA removal from different routes. Among various oxidoreductases, i.e., laccases exhibited a superior potential for the remediation of BPA-containing wastewater. Enzymatic oxidation of BPA can be boosted by using various natural or synthetic redox mediators. Immobilized enzymes can expand their applicability to continuous bioprocessing and facilitates process intensification. Therefore, optimized formulations of insolubilized biocatalysts are of strategic interest in the environmental biotechnology. In this review, recent research studies dealing with BPA removal by the laccase-catalyzed system are presented. At first, the presence of BPA in the ecosystem, sources, exposure, and its impact on the living organisms and human beings is summarized. Then, we highlighted the use of crude as well as immobilized laccases for the degradation of BPA. In addition to toxicity and estrogenicity removal studies, the unresolved challenges, concluding remarks, and possible future direction is proposed in this important research area. It is palpable from the literature reviewed that free as well as immobilized forms of laccases have displayed noteworthy potential for BPA removal from wastewater.

A mixture of routinely encountered xenobiotics induces both redox adaptations and perturbations in blood and tissues of rats after a long-term low-dose exposure regimen: The time and dose issue

Exposure of humans to xenobiotic mixtures is a continuous state during their everyday routine. However, the majority of toxicological studies assess the in vivo effects of individual substances rather than mixtures. Therefore, our main objective was to evaluate the impact of the 12- and 18-month exposure of rats to a mixture containing 13 pesticides, food, and life-style additives in three dosage levels (i.e. 0.0025 × NOAEL, 0.01 × NOAEL, and 0.05 × NOAEL), on redox biomarkers in blood and tissues. Our results indicate that the exposure to the mixture induces physiological adaptations by enhancing the blood antioxidant mechanism (i.e., increased glutathione, catalase and total antioxidant capacity and decreased protein carbonyls and TBARS) at 12 months of exposure. On the contrary, exposure to the 0.05 × NOAEL dose for 18 months induces significant perturbations in blood and tissue redox profile (i.e., increased carbonyls and TBARS). This study simulates a scenario of real-life risk exposure to mixtures of xenobiotics through a long-term low-dose administration regimen in rats. The results obtained could support, at least in part, the necessity of introducing testing of combined stimuli at reference doses and long term for the evaluation of the risk from exposure to chemicals.

Biodegradation of methyl and butylparaben by bacterial strains isolated from amended and non-amended agricultural soil. Identification, behavior and enzyme activities of microorganisms

The aim of the present study was to investigate the kinetics of methylparaben (MPB) and butylparaben (BPB) removal, two emerging pollutants with possible endocrine disrupting effects, from agricultural soil with and without amendment with compost from sewage sludge used as biostimulant. Compound removal is explained by a first-order kinetic model with half-life times of 6.5/6.7 days and 11.4/8.2 days, in presence/absence of compost, for MPB and BPB respectively. % R² for the fitted model were higher than 96% in all cases. Additionally, isolation of bacteria capable to grow using MPB or BPB as carbon source was also carry out. Laboratory tests demonstrated the ability of these bacteria to biodegrade MPB and BPB from culture media in more than 95% in some cases. These strains showed high ability to biodegrade the compounds. Ten isolates, most of them related to Gram positive bacteria of the genus Bacillus, were identified by 16S rRNA gene sequencing. The study of the enzymatic activities of the isolates revealed both esterase (C4) and esterase-lipase activities.

Combination of nejayote and swine wastewater as a medium for Arthrospira maxima and Chlorella vulgaris production and wastewater treatment

Nejayote and swine wastewater are highly pollutant effluents and a source of organic matter load that sometimes released into water bodies (rivers or lakes), soils or public sewer system, with or without partial treatments. Nejayote is a wastewater product of alkaline cooking of maize, whereas, swine wastewater results from the primary production of pigs for the meat market. Owing to the presence of environmentally related pollutants, both sources are considered the major cause of pollution and thus require urgent action. Herein, we report a synergistic approach to effectively use and/or treat Nejayote and swine wastewater as a cost-effective culture medium for microalgae growth, which ultimately induces the removal of polluting agents. In this study, the strains Arthrospira maxima and Chlorella vulgaris were grown using different dilutions of Nejayote and swine wastewater. Both wastewaters were used as the only source of macronutrients and trace elements for growth. For A. maxima, the treatment of 10% nejayote and 90% of water (T3) resulted in a cell growth of 32 × 10⁴ cell/mL at 12 days (μ_max = 0.27/d). While, a mixture of 25% swine wastewater, 25% nejayote and 50% water (T2) produced 32 × 10⁴ cell/mL at 18 days (μ_max = 0.16/d). A significant reduction was also noted as 92% from 138 mg/L of TN, 75% from 77 mg/L of TP, and 96% from 8903 mg/L of COD, among different treatments. For C. vulgaris, the treatment of 10% swine wastewater and 90% water (T1) gave a cell growth of 128 × 10⁶ cell/mL (μ_max = 0.57/d) followed by T3 yielded 62 × 10⁶ cell/mL (μ_max = 0.70/d) and T2 yielded 48 × 10⁶ cell/mL (μ_max = 0.54/d). Up to 91% reduction from 138 mg/L of TN, 85% from 19 mg/L of TP and 96% from 4870 mg/L of COD was also recorded. These results show that microalgae can be used to treat these types of wastewater while at the same time using them as a culture media for microalgae. The resultant biomass can additionally be used for getting other sub-products of commercial interest.

Designing and modeling of a novel electrolysis reactor using porous cathode to produce H2O2 as an oxidant

The entry of toxic organic pollutants and resistant to biodegradation has increased the concern about human health. The use of advanced oxidation (AO) processes to degrade these pollutants has been developing. One of the AO processes is based on the use of hydrogen peroxide in removing resistant organic pollutants.

This study aimed to develop a new reactor capable of producing H₂O₂ in the solution. Therefore, a porous electrode made of stainless steel with the capability of air injection in the electrode center was used. The 30 cm rod graphite electrodes were also used as an anode electrode in a 4000 ml reactor. The effects of variables, including current density (30–40 mA/cm²), time (10–30 min), and electrolyte concentration (12–17 mM/L) on the amount of H₂O₂ production were evaluated by Box behenken design under response surface methodology using Design expert software. The results of this study showed that H₂O₂ can be produced at the electrode surface of porous cathode under optimal conditions of 36 mA/cm² current density, 16 mM/l electrolyte concentration, in 23 min, and in the amount of 34 ppm. Using a porous cathode electrode causes the maximum contact among the solution, water, and air, and increases the production of H₂O₂.

The release of resistant organic compounds to the waste water is a serious problem to the environment. By the application of the Electro-oxidation (EO)reactor with the ability to produce H₂O₂, this issue is resolved. Furthermore, this technique is applied for non-selective degradation of the toxic organic compounds.

•

The electro-oxidation process is a useful method for destruction of persistent organic matter from wastewater.

•

Due to use of porous cathode in this method, contact between the electrode and the sewage is at its maximum level which increases the efficiency and speed of sewage treatment.

•

This method can produce H₂O₂ as a high potential oxidant that can reduce persistent organic properties of sewage and make the wastewater suitable for biological treatment.