Chromatographic separation of proteins on metal immobilized iminodiacetic acid-bound molded monolithic rods of macroporous poly(glycidyl methacrylate-co-ethylene dimethacrylate)

Multicolumn separation platform for simultaneous depletion and prefractionation prior to 2-DE for facilitating in-depth serum proteomics profiling

In this report, we describe an integrated fluidic platform composed of tandem affinity columns for the depletion of high-abundance proteins from human serum and on-line fractionation/concentration of medium- and low-abundance proteins by tandem immobilized metal-ion affinity chromatography (IMAC) columns and reversed phase (RP) column for in-depth proteomics analysis. The depletion columns were based on monolithic polymethacrylate with surface immobilized protein A, protein G', and antibodies for depleting the top 8 high-abundance proteins. The IMAC fractionation/concentration columns consisted of monolithic stationary phases with surface bound iminodiacetic acid (IDA) chelated with Zn2+, Ni2+ and Cu2+, while the RP column was packed with nonpolar polymer beads. The integrated multicolumn fluidic platform was very effective in reducing simultaneously both the dynamic range differences among the protein constituents of serum and the complexity of the proteomics samples, thus, facilitating the in-depth proteomics analysis by 2-DE followed by MALDI-TOF and LC-MS/MS. In fact, the number of detected spots was approximately 1450 using SYPRO fluorescent stain from which 384 spots were subsequently detected by Coomassie Blue. Since the investigation was simply a proof of concept, 295 proteins were readily identified in some selected spots by MALDI-TOF and LC-MS/MS.

Enrichment of glycoproteins using nanoscale chelating concanavalin A monolithic capillary chromatography

Immobilized lectin chromatography can be employed for glycoprotein enrichment, but commonly used columns have limitations of yield and resolution. To improve efficiency and to make the technique applicable to minimal sample material, we have developed a nanoscale chelating Concanavalin A (Con A) monolithic capillary prepared using GMA-EDMA (glycidyl methacrylate-co-ethylene dimethacrylate) as polymeric support. Con A was immobilized on Cu(II)-charged iminodiacetic acid (IDA) regenerable sorbents by forming a IDA:Cu(II):Con A sandwich affinity structure that has high column capacity, as well as stability. When compared with conventional Con A lectin chromatography, the monolithic capillary enabled the better reproducible detection of over double the number of unique N-glycoproteins in human urine samples. Utility for analysis of minimal biological samples was confirmed by the successful elucidation of glycoprotein profiles in mouse urine samples at the microliter scale. The improved efficiency of the nanoscale monolithic capillary will impact the analysis of glycoproteins in complex biological samples, especially where only limited material may be available.

Integrated analytical strategies for the study of phosphorylation and glycosylation in proteins

The post-translational modification (PTM) of proteins is a common biological mechanism for regulating protein localization, function, and turnover. The direct analysis of modifications is required because they are not coded by genes, and thus are not predictable. Different MS-based proteomic strategies are used for the analysis of PTMs, such as phosphorylation and glycosylation, and are composed of a structural simplification step of the protein followed by specific isolation step to extract the classes of modified peptides (also called "sub-proteomes") before mass spectrometry. This specific isolation step is necessary because PTMs occur at a sub-stoichiometric level and signal suppression of the modified fractions in the mass spectrometer occurs in the presence of the more-abundant non-modified counterpart. The request of innovative analytical strategies in PTM studies is the capability to localize the modification sites, give detailed structural information on the modification, and determine the isoform composition with increased selectivity, sensitivity, and throughput. This review focuses on the description of recent integrated analytical systems proposed for the analysis of PTMs in proteins, and their application to profile the glycoproteome and the phosphoproteome in biological samples. Comments on the difficulties and usefulness of the analytical strategies are given.

Immobilized zirconium ion affinity chromatography for specific enrichment of phosphopeptides in phosphoproteome analysis

Large scale characterization of phosphoproteins requires highly specific methods for purification of phosphopeptides because of the low abundance of phosphoproteins and substoichiometry of phosphorylation. Enrichment of phosphopeptides from complex peptide mixtures by IMAC is a popular way to perform phosphoproteome analysis. However, conventional IMAC adsorbents with iminodiacetic acid as the chelating group to immobilize Fe(3+) lack enough specificity for efficient phosphoproteome analysis. Here we report a novel IMAC adsorbent through Zr(4+) chelation to the phosphonate-modified poly(glycidyl methacrylate-co-ethylene dimethacrylate) polymer beads. The high specificity of Zr(4+)-IMAC adsorbent was demonstrated by effectively enriching phosphopeptides from the digest mixture of phosphoprotein (alpha- or beta-casein) and bovine serum albumin with molar ratio at 1:100. Zr(4+)-IMAC adsorbent was also successfully applied for the analysis of mouse liver phosphoproteome, resulting in the identification of 153 phosphopeptides (163 phosphorylation sites) from 133 proteins in mouse liver lysate. Significantly more phosphopeptides were identified than by the conventional Fe(3+)-IMAC approach, indicating the excellent performance of the Zr(4+)-IMAC approach. The high specificity of Zr(4+)-IMAC adsorbent was found to mainly result from the strong interaction between chelating Zr(4+) and phosphate group on phosphopeptides. Enrichment of phosphopeptides by Zr(4+)-IMAC provides a powerful approach for large scale phosphoproteome analysis.

Preparation and characterization of polyethyleneimine modified ion-exchanger based on poly(methacrylate-co-ethylene dimethacrylate) monolith

A polyethyleneimine (PEI) modified ion-exchanger was prepared based on poly(methacrylate-co-ethylene dimethacrylate) monolith cast in 100 mm x 4.6 mm I.D. stainless steel tube with heptane as the porogenic solvent at 65 degrees C for 12 h. The pores larger than 500 nm presented 85% of total pore volume of PEI monolith and provided the better permeability for separation. Bovine serum albumin (BSA) binding capacity on the column was enhanced with increasing the molecular weight of PEI, indicated that the brush ligand emanated from the surface and captured more protein by multiple binding sites. Titration experiment as well as BSA retention versus the pH of mobile phase showed that the monolith exhibited weak ion-exchange property, and recovered BSA on the monolith reached 97% when NaCl content in mobile phase was higher than 0.5 M. Frontal analysis and gradient elution of BSA indicated that PEI monolith provided the rapid mass transfer in chromatographic procedure, which made the dynamic binding capacities as well as column efficiency keep as constants at high operating flow rate. Fast separation of three mode proteins mixture (lysozyme, hemoglobin and BSA) on the monolith was achieved within 3 min at velocity of 1445 cm/h. This demonstrated the potential of PEI monolith for the rapid analysis and separation of proteins.

Fe3+ immobilized metal affinity chromatography with silica monolithic capillary column for phosphoproteome analysis

Immobilized metal affinity chromatography (IMAC) is a commonly used technique for phosphoproteome analysis due to its high affinity for adsorption of phosphopeptides. Miniaturization of IMAC column is essential for the analysis of a small amount of sample. Nanoscale IMAC column was prepared by chemical modification of silica monolith with iminodiacetic acid (IDA) followed by the immobilization of Fe3+ ion inside the capillary. It was demonstrated that Fe3+-IDA silica monolithic IMAC capillary column could specifically capture the phosphopeptides from tryptic digest of alpha-casein with analysis by MALDI-TOF MS. The silica monolithic IMAC capillary column was manually coupled with nanoflow RPLC/nanospray ESI mass spectrometer (muRPLC-nanoESI MS) for phosphoproteome analysis. The system was validated by analysis of standard phosphoproteins and then it was applied to the analysis of protein phosphorylation in mouse liver lysate. Besides MS/MS spectra, MS/MS/MS spectra were also collected for neutral loss peak. After database search and manual validation with conservative criteria, 29 singly phosphorylated peptides were identified by analyzing a tryptic digest of only 12 mug mouse liver lysate. The results demonstrated that the silica monolithic IMAC capillary column coupled with muRPLC-nanoESI MS was very suitable for the phosphoproteome analysis of minute sample.

Affinity monolith chromatography

The combined use of monolithic supports with selective affinity ligands as stationary phases has recently given rise to a new method known as affinity monolith chromatography (AMC). This review will discuss the basic principles behind AMC and examine the types of supports and ligands that have been employed in this method. Approaches for placing affinity ligands in monoliths will be considered, including methods based on covalent immobilization, biospecific adsorption, entrapment, and the formation of coordination complexes. Several reported applications will then be presented, such as the use of AMC for bioaffinity chromatography, immunoaffinity chromatography, immobilized metal-ion affinity chromatography, dye-ligand affinity chromatography, and biomimetic chromatography. Other applications that will be discussed are chiral separations and studies of biological interactions based on AMC.

Purification of VP3 protein of infectious bursal disease virus using nickel ion-immobilized regenerated cellulose-based membranes

In this study, hexa-histidine tagged VP3 protein of infectious bursal disease virus (IBDV) was purified using immobilized metal ion affinity technique from the fermentation of Escherichia coli BL21 (DE3) containing a recombinant plasmid with a VP3 gene. The purification efficiencies of VP3 protein (TVP3 and DeltaTVP3) using Ni(2+)-NTA commercial agarose gels and Ni(2+)-IDA regenerated cellulose-based membranes at 4 degrees C were compared. A good washing condition for removing most impurity proteins was found as 20 mM NaH(2)PO(4), 500 mM NaCl, 40 mM imidazole, pH 7.8, whereas an efficient elution condition was 20 mM NaH(2)PO(4), 500 mM NaCl, 500 or 750 mM imidazole, pH 7.8. By applying these conditions to the flow experiments, similar recovery (86-88%) and purity (98-99%) for VP3 were obtained in both gel column (1 ml gel) and membrane cartridge (four membrane disks) under the flow rate of 1.7 ml/min for protein loading and 2.7 ml/min for protein elution. Regarding that the membrane process exhibited some advantages such as shorter residence time and lower cost, a better process efficiency in a large-scale system could be expected for the Ni(2+)-IDA membranes.

Effect of the matrix structure and concentration of polymer-immobilized Ni2+–iminodiacetic acid complexes on retention of IgG1

Terpolymer bead particles (100-350 microm in diameter) were prepared by suspension radical polymerization from methacrylate esters [2,3-epoxypropyl methacrylate (GMA), 2-(2-hydroxyethoxy)ethyl methacrylate (DEGMA) and ethylene dimethacrylate (EDMA)] and subsequently derivatized affording iminodiacetic acid (IDA) chelating sorbents. The sorbents differed in pore volumes (0-0.7 cm3/g) and specific surface areas (0.03-9.8 m2/g) of their matrices as well as in the amounts of immobilized Ni2+-IDA complexes (0.03-1.58 mmol/g). The binding of imidazole was studied by frontal chromatography to evaluate the accessibility of Ni2+-IDA complexes. It was found that an increase in the bonded imidazole content with increasing immobilized Ni2+-IDA concentration was strongly dependent on the matrix morphology. A higher pore volume of the matrix significantly improved the utilizability of Ni2+-IDA complexes for imidazole binding. The performance of the sorbents based on two porous matrices with immobilized Ni2+-IDA concentration (0.1-1.58 mmol/g) differing in pore size distributions was compared in immobilized metal affinity chromatography (IMAC) of monoclonal mouse immunoglobulin IgG1 specific against human choriogonadotropic hormone (GTH-spec IgG1). The results have shown that sorbents based on matrix with large pores (up to 20 microm in diameter) exhibited high protein binding capacities. The GTH-spec IgG1 (Mw=158,000) was eluted from all the sorbents in its native form as was confirmed by MALDI-TOF.

Characterisation of metal–chelate methacrylate monoliths

Monoliths are attractive stationary phases for purification of large biomolecules like proteins because of their flow-unaffected properties. Isolation of histidine containing proteins to high purity can be efficiently performed using metal-chelate interactions within a single chromatographic step. In this work, we investigated properties of commercial metal-chelate methacrylate monoliths-Convective Interaction Media (CIM). Analytical CIM disk monolithic columns and CIM 8 ml monolithic columns were used for purification of tumor necrosis factor-alpha (TNF-alpha) analog LK-801 and green fluorescence protein with 6 histidine tag (GFP-6His). In both cases, purity over 90% was achieved. Dynamic binding capacity at 10% of breakthrough was around 17-18 mg/ml for LK-801 and around 30 mg/ml for GFP-6His. Adsorption isotherm revealed that the maximal capacity is achieved at protein concentration above 60 microg/ml. Dynamic binding capacity and resolution were found to be flow unaffected.

Less common applications of monoliths: I. Microscale protein mapping with proteolytic enzymes immobilized on monolithic supports

This review summarizes the recent contributions to the rapidly growing area of immobilized enzymes employing both silica and synthetic polymer-based monoliths as supports. Focus is mainly on immobilized proteolytic enzyme reactors designed for studies in proteomics. Porous monoliths emerged first as a new class of stationary phases for HPLC in the early 1990s. Soon thereafter, they were also used as supports for immobilization of proteins and preparation of both stationary phases for bioaffinity chromatography and enzymatic reactors. Organic polymer-based monoliths are typically prepared using a simple molding process carried out within the confines of a "mold" such as chromatographic column or capillary. Polymerization of a mixture comprising monomers, initiator, and porogenic solvent affords macroporous materials. In contrast, silica-based monoliths are first formed as a rigid rod from tetraalkoxysilane in the presence of PEG and subsequently encased with a plastic tube. Both types of monolith feature large through-pores that enable a rapid flow-through. Since all the solutions must flow through the monolith, the convection considerably accelerates mass transfer within the monolith. As a result, reactors including enzyme immobilized on monolithic support exhibit much higher activity compared to the reactions in solution.

Enhanced Protein Delivery from Photopolymerized Hydrogels Using a Pseudospecific Metal Chelating Ligand

PURPOSE

This study was conducted to investigate the cause of incomplete protein release from photopolymerized poly(ethylene glycol) (PEG) hydrogels and verify the protein-protection mechanism provided by iminodiacetic acid (IDA).

METHODS

The in vitro release of bovine serum albumin (BSA) from PEG hydrogels prepared under different conditions was studied. Photoinitiator and initial protein concentrations were varied as well as the addition of IDA and metal ions. Protein immobilization within the nondegradable networks via free-radical reaction was demonstrated by gel electrophoresis.

RESULTS

Protein release efficiency was shown to be dependent on photoinitiator and initial protein concentration. Gel electrophoresis results revealed immobilization of protein to the polymer network and further indicated the detrimental role of free radicals in lowering protein-release efficiency. Adding IDA to the prepolymer solution enhanced total protein release from the subsequently photopolymerized network in a dose-dependent manner. The addition of metal ions including Cu2+, Zn2+, and Ni2+ further increased BSA release efficiency. Agreement between the protein release data and theoretical model predictions accounting for reversible protein-IDA binding further validated the protection effect provided by IDA and IDA-transition metal complexes.

CONCLUSIONS

The protection effect described in this study offers a novel strategy for increasing the delivery efficiencies of many therapeutically valuable proteins.

Iminodiacetic acid derivatized porous silicon as a matrix support for sample pretreatment and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis

Iminodiacetic acid (IDA)-1,2-epoxy-9-decene has been synthesized and covalently linked to the surface of porous silicon wafer through a photochemical reaction. The negatively charged carboxylic acid groups on the porous silicon wafer are capable of binding oppositely charged species from sample solutions through electrostatic interactions. This allows the removal of contaminants prior to matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) by simply washing the porous silicon surface. The carboxylic acid end groups on porous silicon can be used to selectively bind and concentrate target species in sample solutions. Furthermore, Fe(3+)-IDA-derivatized porous silicon was prepared to specifically and effectively concentrate phosphopeptides from the tryptic digests of phosphoproteins, followed by MALDI-MS analysis.

Analysis of flavonoids in leaves of Adinandra nitida by capillary electrochromatography on monolithic columns with stepwise gradient elution

Extracts of Adinandra nitida leaves, known as Shiyacha in China, were analyzed by monolithic columns of capillary electrochromatography (CEC). To obtain good resolution within a short time, stepwise gradient elution of CEC was employed, and the effects of experimental parameters, such as the buffer, the gradient conditions, and the mode of injection were studied systematically. Under optimized conditions, analysis could be accomplished in 25 min on a monolithic rod of macroporous poly(butyl methacrylate-co-ethylene dimethacrylate). With two identified flavonoids, epicatechin and apigenin, as markers, a quality control method for Shiyacha and its relevant products was established. The calibration curves exhibited good linear behavior over the concentration range of two orders of magnitude. On combination with an on-line concentration technique, the detection limit of flavonoids could be decreased to 25 ng for apigenin.

On-line concentration of peptides and proteins with the hyphenation of polymer monolithic immobilized metal affinity chromatography and capillary electrophoresis

An iminodiacetic acid (IDA)-type adsorbent is prepared at the one end of a capillary by covalently bonding IDA to the monolithic rods of macroporous poly(glycidyl methacrylate-co-ethylene dimethacrylate). Cu(II) is later introduced to the support via the interaction with IDA. By this means, polymer monolithic immobilized metal affinity chromatography (IMAC) materials are prepared. With such a column, IMAC for on-line concentration and capillary electrophoresis (CE) for the subsequent analysis are hyphenated for the analysis of peptides and proteins. The reproducibility of such a column has been proved good with relative standard deviations (RSDs) of dead time of less than 5% for injection-to-injection and 12% for column-to-column (n = 3). Through application on the analysis of standard peptides and real protein samples, such a technique has shown promising in proteome study.

Polystyrene monolithic column functionalized with copper-iminodiacetate complex as a stationary phase for open tubular capillary electrochromatography

Polystyrene-divinylbenzene copolymer functionalized with copper-iminodiacetate complex was prepared in situ for the capillary electrochromatographic separation of amino acids and oligopeptides. The steps included silanization of the fused-silica capillary column, functionalization, polymerization, hydrolysis and complexation. For having a homogeneous polymerization system in the selected porogen, the functional monomer was obtained from the reaction of 4-vinylbenzyl chloride and diethyl iminodiacetate. Scanning electron microscopy showed that the polymeric monolith column was an open tubular column with a thickness of 0.3 microm. Various modes of hydrolysis were investigated via the electroosmatic flow measurement to find the optimization condition prior to introducing the copper ion. The influence of pH, composition and concentration of mobile phase as well as the organic modifier were investigated. Judging from our results, the recognition performance of the prepared stationary phase might be integrated from the mechanisms of ligand exchange, electrophoretic mobility, hydrophobic interaction, and hydrogen bonding.

Monoliths for fast bioseparation and bioconversion and their applications in biotechnology

Monoliths have consolidated their position in bioseparation. More than 200 different applications have been reported in the past two decades and their advantages compared to conventional chromatography demonstrated. These include the high mass transfer efficiency due to the convective flow enabled by the macroporous character of the matrix. Recently plasmid DNA and viruses were separated with high efficiency and cryogels and monolithic superporous agarose were developed for capture of proteins from crude homogenates and separation of microorganisms or lymphocytes. Currently four companies manufacture monoliths mainly for analytical applications although monoliths with a volume of 0.8 liter are commercially available and 8 L are available as prototypes. A book entitled "Monolithic materials: preparation, properties and applications" was published in 2003 and became standard reference of the status of this area. This review focuses on the progress in monoliths that goes beyond the scope of this reference book. Less progress has been made in the field of bioconversions in spite of the fact that monolithic supports exhibit better performance than beads in enzymatic processing of macromolecules. It appears that the scientific community has not yet realized that supports for these applications are readily available. In addition, monoliths will further substantially advance bioseparations of both small and large molecules in the future.

Affinity chromatography with monolithic capillary columns

Monolithic capillary columns with surface-immobilized mannan have been introduced for affinity-based micro-column separations by nano-liquid chromatography (nano-LC) and capillary electrochromatography (CEC). Two kinds of polymethacrylate monoliths were prepared, namely poly(glycidyl methacrylate-co-ethylene dimethacrylate) and poly(glycidyl methacrylate-co-ethylene dimethacrylate-co-[2-(methacryloyloxy)ethyl]trimethyl ammonium chloride) to yield neutral and cationic macroporous polymer, respectively. While neutral monoliths with immobilized mannan were only useful for affinity nano-LC, the cationic monoliths with surface-bound mannan were useful in both affinity nano-LC and affinity CEC. The cationic monoliths allowed a relatively high electro-osmotic flow (EOF) when mannan was immobilized to the epoxy monolith via a positively charged spacer arm, triethylenetetramine. The neutral monoliths exhibited lower permeability under pressure-driven flow (PDF) than the cationic monoliths indicating that the latter had wider flow-through pores than the former. Both types of monoliths with immobilized mannan exhibited strong affinity toward mannose-binding proteins (MBP) such as the plant lectins concanavalin A and Lens culinaris agglutinin and a mammalian lectin (e.g. rabbit serum mannose-binding protein). Due to the strong binding affinity, the monoliths with surface bound mannan allowed the injection of large volume of rabbit serum and to isolate in a single run the mannose-binding protein in an amount sufficient to run with it sodium dodecylsulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS), thus demonstrating their capability in "nano-proteomics".

Development of reactive thiol-modified monolithic capillaries and in-column surface functionalization by radical addition of a chromatographic ligand for capillary electrochromatography

Reactive thiol-modified capillary columns for capillary electrochromatography (CEC) were developed by transforming the pendent 2,3-epoxypropyl groups of poly(glycidyl methacrylate-co-ethylene dimethacrylate) (poly(GMA-co-EDMA)) monoliths into 3-mercapto-2-hydroxy-propyl residues by a nucleophilic substitution reaction, employing sodium-hydrogen sulfide as nucleophilic reagent. Conditions for this modification reaction were systematically optimized with respect to different parameters, such as reaction temperature, pH-value, reaction time, type and concentration of organic modifier, and concentration of the sodium-hydrogen sulfide solution. The amount of thiol groups that was generated on the monolith surface was determined directly in the capillaries by a disulfide-exchange reaction employing 2,2'-dipyridyl disulfide (DPDS). This reaction in the capillary liberates pyridine-2-thione in equimolar amount to the surface sulfhydryls, which was collected into a vial and determined photometrically at 343 nm by RP-HPLC. About 17% of the total lateral epoxide moieties of the monolithic substrate could be transformed to reactive sulfhydryl groups, which corresponds to about 0.7 mmol g(-1) monolithic polymer, with a column-to-column repeatability of 3.2% R.S.D. The reactive thiol groups can be utilized to attach any chromatographic ligand with appropriate anchor in a second step, e.g. by radical addition, graft polymerization, nucleophilic substitution, disulfide formation or Michael addition reaction. To demonstrate the feasibility of the concept, we chose an anion exchange type chromatographic ligand based on a quinine derivative, O-9-tert-butylcarbamoylquinine (t-BuCQN) which was attached to the monolith in a radical addition reaction, for a further in-column surface functionalisation. About 78% of the sulfhydryl groups were derivatized with t-BuCQN as determined from differential DPDS assays before and after the selector immobilization reaction. The applicability of these surface-functionalised monolithic capillary columns could be shown by an electrochromatographic separation of the enantiomers of N-3,5-dinitrobenzoyl-leucine, which performed fairly well compared to an analogous capillary that was fabricated by an in situ copolymerization approach.

Novel metal-chelate affinity adsorbent for purification of immunoglobulin-G from human plasma

Metal-chelating ligand and/or comonomer 2-methacrylolyamidohistidine (MAH) was synthesized by using methacryloyl chloride and L-histidine methyl ester. MAH was characterized by NMR and FTIR. Spherical beads with an average diameter of 75-125 microm were produced by suspension polymerization of methylmethacrylate (MMA) and MAH carried out in an aqueous dispersion medium. Poly(MMA-MAH) beads had a specific surface area of 37.5 m(2)/g. Poly(MMA-MAH) beads were characterized by water uptake studies, FTIR, SEM and elemental analysis. Elemental analysis of MAH for nitrogen was estimated as 34.7 microM/g of polymer. Then, Cu(2+) ions were chelated on the beads. Cu(2+)-chelated beads with a swelling ratio of 38% were used in the adsorption of human-immunoglobulin G (HIgG) from both aqueous solutions and human plasma. The maximum adsorption capacities of the Cu(2+)-chelated beads were found to be 12.2 mg/g at pH 6.5 in phosphate buffer and 15.7 mg/g at pH 7.0 in MOPS. Higher adsorption value was obtained from human plasma (up to 54.3 mg/g) with a purity of 90.7%. The metal-chelate affinity beads allowed one-step separation of HIgG from human plasma. The adsorption-desorption cycle was repeated 10 times using the same beads without noticeable loss in their HIgG adsorption capacity.

Purification of penicillin G acylase using immobilized metal affinity membranes

The immobilized metal affinity membrane (IMAM) with modified regeneration cellulose was employed for purification of penicillin G acylase (PGA). For studying PGA adsorption capacity on the IMAM, factors such as chelator surface density, chelating metal, loading temperature, pH, NaCl concentration and elution solutions were investigated. The optimal loading conditions were found at 4 degrees C, 0.5 M NaCl, 32.04 micromol Cu(2+) per disk with 10 mM sodium phosphate buffer, pH 8.5, whereas elution conditions were: 1 M NH(4)Cl with 10 mM sodium phosphate buffer, pH 6.8. By applying these chromatographic conditions to the flow experiments in a cartridge, a 9.11-fold purification in specific activity with 90.25% recovery for PGA purification was obtained. Meanwhile, more than eight-times reusability of the membrane was achieved with the EDTA regeneration solutions.

Chromatographic performance of monolithic and particulate stationary phases. Hydrodynamics and adsorption capacity

Monolithic chromatographic support structures offer, as compared to the conventional particulate materials, a unique combination of high bed permeability, optimized solute transport to and from the active surface sites and a high loading capacity by the introduction of hierarchical order in the interconnected pore network and the possibility to independently manipulate the contributing sets of pores. While basic principles governing flow resistance, axial dispersion and adsorption capacity are remaining identical, and a similarity to particulate systems can be well recognized on that basis, a direct comparison of sphere geometry with monolithic structures is less obvious due, not least, to the complex shape of theskeleton domain. We present here a simple, widely applicable, phenomenological approach for treating single-phase incompressible flow through structures having a continuous, rigid solid phase. It relies on the determination of equivalent particle (sphere) dimensions which characterize the corresponding behaviour in a particulate, i.e. discontinuous bed. Equivalence is then obtained by dimensionless scaling of macroscopic fluid dynamical behaviour, hydraulic permeability and hydrodynamic dispersion in both types of materials, without needing a direct geometrical translation of their constituent units. Differences in adsorption capacity between particulate and monolithic stationary phases show that the silica-based monoliths with a bimodal pore size distribution provide, due to the high total porosity of the material of more than 90%, comparable maximum loading capacities with respect to random-close packings of completely porous spheres.

High-performance affinity chromatography with immobilization of protein A and L-histidine on molded monolith

Reactive monoliths of macroporous poly(glycidyl methacrylate-co-ethylene dimethacrylate) have been prepared by "in-situ" copolymerization of the monomers in the presence of porogenic diluents. Protein A and L-histidine were immobilized on the monoliths directly or through a spacer arm, respectively. The properties of these two kinds of affinity columns were characterized, and the results showed that the columns with coupling of ligands by a spacer arm have some extent of non-specific adsorption for bovine serum albumin. The affinity column based on the monolithic polymer support provided us with good hydrodynamic characteristic, low flow resistance, and easy preparation. These two affinity columns were used for the purification of immunoglobulin G from human serum. The purity of the purified IgG was detected by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS). The stability of the protein A affinity column was investigated, and its performance remained invariable after half a year. The effects of the nature and the pH of the buffer system on the adsorption capacity of human IgG on histidyl affinity column were also investigated. The protein A affinity column is favorable for rapid analysis of human IgG samples. In contrast, the advantages of mild elution conditions, high stability, as well as low cost provide the histidyl column further potential possibility for fast removal of IgG from human plasma in clinical applications.

High-performance affinity chromatography for characterization of human immunoglobulin G digestion with papain

Reactive continuous rods of macroporous poly(glycidyl methacrylate-co-ethylene dimethacrylate) were prepared within the confines of a stainless steel column. Then papain was immobilized on these monoliths either directly or linked by a spacer arm. In a further step, a protein A affinity column was used for the characterization of the digestion products of human immunoglobulin G (IgG) by papain. The results showed that papain immobilized on the monolithic rod through a spacer arm exhibits higher activity for the digestion of human IgG than that without a spacer arm. The apparent Michaelis-Menten kinetic constants of free and immobilized papain, K(m) and V(max), were determined. The digestion conditions of human IgG with free and immobilized papain were optimized. Comparison of the thermal stability of free and immobilized papain showed that the immobilized papain exhibited higher thermal stability than the free enzyme. The half-time of immobilized papain reaches about a week under optimum pH and temperature conditions.