Ultrathin graphitic carbon nitride nanosheet: a highly efficient fluorosensor for rapid, ultrasensitive detection of Cu(2+)

A double-potential ratiometric electrochemiluminescence platform based on g-C3N4 nanosheets (g-C3N4 NSs) and graphene quantum dots for Cu2+ detection

A new kind of convenient, low-cost double-potential ratiometric ECL sensing platform for the quantification of Cu²⁺ was developed with carbon nitride nanosheets (g-C₃N₄ NSs) and graphene quantum dots (GQDs) as ECL luminophores. g-C₃N₄ NSs mixed with multi-walled carbon nanotubes (MWCNTs) was immobilized on a glass carbon electrode (GCE) and produced strong cathodic ECL at a potential of -1.2 V (vs. Ag/AgCl), while GQDs in the solution gave anodic ECL at +2.5 V. MWCNTs were used here to amplify the ECL signal of g-C₃N₄ NSs. The addition of Cu²⁺ causes the cathodic ECL signal from g-C₃N₄ to decline, while the anodic ECL signal from GQDs remains unchanged. With the anodic ECL signal as an internal reference, a double-potential ratiometric ECL sensing platform for Cu²⁺ was established. The ratio of the cathodic signal intensity to anodic signal intensity showed a linear response to the Cu²⁺ concentration over a range from 5.0 × 10^-10 to 1.0 × 10^-6 mol L^-1 and the detection limit was 0.37 nmol L^-1 (3σ/S). Such a construction strategy alleviates the interference from the environment and therefore improves the detection accuracy of Cu²⁺. Compared with other methods for Cu²⁺ detection, this method is simpler and more sensitive.

Facile synthesis of doped CxNy QDs as photoluminescent matrix for direct detection of hydroquinone

In this work, we are reporting facile hydrothermal synthesis of a highly photoluminescent doped carbon nitride quantum dots (C_xN_yQDs) and implied it for direct detection of hydroquinone (H₂Q) by photoluminescence quenching phenomenon. Oxygen and sulphur moieties are regarded as dopant species in C_xN_yQDs and sourced from cheap solid precursors viz. cysteine and maleic acid. Morphological studies of C_xN_yQDs have done by SEM and TEM techniques, while structural analysis has carried out using FTIR, XPS, EDS and UV-Visible spectroscopy. The strong tendency of dispersivity of this QD in water has revealed by its zeta potential value of -32.4 mV. Optical properties of the as-prepared QDs have optimized at different excitation wavelengths. The photoluminescence stability of the dispersion is tested in various pH solutions and under continuous UV irradiation (365 nm). After that, sensing property is observed in quenching of photoluminescence feature of as-prepared QDs by direct addition of various concentrations of H₂Q. We obtained lower detection limit (LOD) of 50 nM (S/N = 3) in linear range from 12 to 57.5 μM. The reduction in photoluminescence of QDs may be attributed to electron transfer from QDs to oxidized H₂Q via -S^- and -COO^- groups present at its surface. Further, as-prepared QDs matrix exhibited high selectivity for hydroquinone over a range of potential interfering agents. Thus, the present work shows cost-effective facile synthesis of highly stable O- and S-doped carbon nitride (C_xN_y) quantum dots as promising photoluminescent sensor for pollutant hydroquinone without help of any enzyme or polymer assisted system.

Convenient and highly sensitive detection of Cu2+ using chitosan solid film with g-C3N4 nanosheets

A solid fluorescence sensor composed of g-C3N4 nanosheets and chitosan solid film was fabricated by electrostatic interaction. The g-C3N4 nanosheet/chitosan solid film showed selectivity and sensitivity to Cu2+ which was higher than that of other metal ions in common use. Cu2+ ions were found to efficiently bind and quench the fluorescence of the g-C3N4 nanosheet/chitosan solid film. The absorption band of the g-C3N4 nanosheet/chitosan solid film was at 240 nm in the presence of Cu2+, and the maximum emission peak was at 380 nm. Copper ion concentrations were between 0 and 3.1 × 10−5 mol/L at pH 7, the detection limit is 5 nM, compared with previous reports, it was much lower than before. Good linear relationships existed between the metal ion concentration and fluorescence intensity of g-C3N4 nanosheets in the quenching and recovering processes. This is the first study to report on the detection of Cu2+ by utilizing g-C3N4 nanosheet/chitosan composite film. The as-prepared films were conveniently prepared, easy to operate, and recyclable, as well as sensitive and selective to detect Cu2+ in water. All these features indicate the sensor’s potential application in disease diagnosis.

Carbon nitride quantum dots tethered on CNTs for the electrochemical detection of dopamine and uric acid

A 0D–1D CNQDs/f-CNT architecture composed of 0D CNQDs tethered on a 1D functionalized multiwalled carbon nanotube (f-CNT) network was used for dopamine sensing.

Facile Microwave-Assisted Synthesis of Functionalized Carbon Nitride Quantum Dots as Fluorescence Probe for Fast and Highly Selective Detection of 2,4,6-Trinitrophenol

Functionalized carbon nitride quantum dots (CNQDs) are fabricated by moderate carbonization of L-tartaric acid and urea in oil acid media by a facile microwave-assisted solvothermal method. The obtained CNQDs are monodispersed with a narrow size distribution (average size of 3.5 nm), and exhibit excellent selectivity and sensitivity of fluorescence quenching for 2,4,6-trinitrophenol (TNP) with a quenching efficiency coefficient Ksv of 4.75 × 104 M-1. This sensing system exhibits a fast response time within 1 min and a wide linear response range from 0.1 to 15 μM. The limit of detection is as low as 87 nM, which is comparable or lower than the other probes. The application of the developed probe to the detection of TNP in spiked water samples yields satisfactory results. The mechanism of fluorescence quenching is also discussed. Graphical Abstract An optical sensor based on functionalized carbon nitride quantum dots (CNQDs) were fabricated from L-tartaric acid and urea by a facile one-pot microwave-assisted solvothermal method, and were effectively utilized to the detection of 2,4,6-trinitrophenol (TNP) based on fluorescence (FL) quenching.

Two-dimensional materials in biomedical, biosensing and sensing applications

Two-dimensional (2D) materials are at the forefront of materials research. Here we overview their applications beyond graphene, such as transition metal dichalcogenides, monoelemental Xenes (including phosphorene and bismuthene), carbon nitrides, boron nitrides along with transition metal carbides and nitrides (MXenes). We discuss their usage in various biomedical and environmental monitoring applications, from biosensors to therapeutic treatment agents, their toxicity and their utility in chemical sensing. We highlight how a specific chemical, physical and optical property of 2D materials can influence the performance of bio/sensing, improve drug delivery and photo/thermal therapy as well as affect their toxicity. Such properties are determined by crystal phases electrical conductivity, degree of exfoliation, surface functionalization, strong photoluminescence, strong optical absorption in the near-infrared range and high photothermal conversion efficiency. This review conveys the great future of all the families of 2D materials, especially with the expanding 2D materials' landscape as new materials emerge such as germanene and silicene.

Carbon nitride-based nanocaptor: An intelligent nanosystem with metal ions chelating effect for enhanced magnetic targeting phototherapy of Alzheimer's disease

Metal ions imbalance, a well-established pathologic feature of alzheimer's disease (AD), ultimately results in the deposition of amyloid-β peptide (Aβ) proteins and Aβ-induced neurotoxicity. Herein, to overcome these hurdles, an intelligent Aβ nanocaptor with the capacity to chelate metal ions and targeted therapy is developed by anchoring carbon nitride (C₃N₄) nanodots to Fe₃O₄@mesoporous silica nanospheres, and decorated with benzothiazole aniline (BTA) (designated as B-FeCN). The C₃N₄ nanodots could effectively capture superfluous Cu²⁺ to suppress the formation of Cu²⁺-Aβ complex thereby eliminating Aβ aggregation. Simultaneously, the nanocaptor enables local low-temperature hyperthermia to promote the dissolution of preformed fiber precipitates, therefore, maximizing the therapeutic benefits. Owing to its favorable photothermal effect, the blood-brain barrier (BBB) permeability of the nanocaptor is noticeably ameliorated upon laser illumination, which conquers the limitations associated with traditional anti-AD drugs, as evidenced by in vivo and in vitro studies. Besides, leveraging on the magnetic properties of Fe₃O₄ core, the nanocaptor is magnetized to access to the targeted Aβ regions under extrinsic magnetic field. BTA conjugation, which specifically binds to the β₂ position of the Aβ fibers, executes specific targeting at Aβ plaques, and synchronously endows the BTA-modified nanocaptor with fluorescent imaging property for sensitively detecting Aβ aggregates. In view of these superiorities, nanocaptors combine metallostasis restoration and Aβ targeted therapy can surmount the interference of copper ions, enhance BBB permeability and protect cells against Aβ-induced neurotoxicity, which provides new avenues for developing neuroprotective nanosystems for the treatment of alzheimer's disease.

Surface-enhanced electrochemiluminescence combined with resonance energy transfer for sensitive carcinoembryonic antigen detection in exhaled breath condensates

The detection of biomarkers in exhaled breath condensates (EBCs) is regarded as a promising non-invasive diagnostic approach. However, the ultralow concentration of biomarkers in EBCs is a great challenge. Herein, a sensitive dual signal amplification strategy was developed based on surface-enhanced electrochemiluminescence (SEECL) combined with resonance energy transfer (RET). Gold nanoparticles-functionalized graphite-like carbon nitride nanohybrids (Au-g-C₃N₄ NHs) could be used as an energy transfer donor because of the good overlap between its emission peak and the absorption peak of tris(2,2'-bipyridine)ruthenium dichloride (Ru(bpy)₃Cl₂) at 460 nm. Gold-silicon dioxide core-shell nanoparticles doped with Ru(bpy)₃²⁺(Au@SiO₂-Ru) were employed as an energy transfer acceptor emitting at 620 nm. Moreover, the signals at 620 nm emitted by Ru (bpy)₃²⁺ were enhanced by 5 times, attributed to the localized surface plasmon resonance (LSPR) of gold nanoparticles (Au NPs). The detection of carcinoembryonic antigen (CEA) was performed by using two aptamers as the recognition unit; whereby aptamer 1 (Apt1) was modified on the surface of Au-g-C₃N₄ NHs, and aptamer 2 (Apt2) was banded on the surface of Au@SiO₂-Ru. In the presence of CEA, a sandwich structure was formed between Au-g-C₃N₄ NHs-Apt1-CEA and Apt2-Au@SiO₂-Ru, which resulted in an ultrasensitive detection of CEA. The proposed electrochemiluminescence sensor showed a wide linear relationship with the CEA concentration in the range from 1.0 pg mL^-1 to 5.0 ng mL^-1, with a limit of detection (LOD) of 0.3 pg mL^-1. Finally, the practicality of the proposed sensor was demonstrated to detect CEA in EBCs, and the obtained results were in good agreement with the enzyme-linked immunosorbent assay (ELISA) method.

Novel fluorescence probe based on bright emitted carbon dots for ClO- detection in real water samples and living cells

Low-toxic and environmentally friendly carbon dots (CDs) have been extensively applied in various fields. CDs usually demonstrate excellent selectivity and high sensitivity, especially in ion detection. However, the most commonly used CDs are excited by ultraviolet (UV) light and emit weak fluorescence light, limiting their application in some fields. Herein, novel fluorine and nitrogen codoped carbon dots (FNCDs) were prepared by a simple hydrothermal method and used as a fluorescent probe for ion detection. The FNCDs were excited by blue light and emitted strong green fluorescence, and the photoluminescence quantum yield was as high as 56.7%. The fluorescence of the FNCDs could be rapidly quenched by ClO^- ions, indicating their potential application for ClO^- detection. The fluorescence of the FNCDs was quenched by ClO^- ions in less than 1 min, and the intensity of the fluorescence decreased linearly as the ClO^- concentration increased from 0 to 20 μM. The detection limit was calculated to be as low as 8.2 nM, indicating high sensitivity of the FNCDs probe. The quench effect of the ClO^- ions on the FNCDs probe fluorescence was not affected by other ions, demonstrating excellent selectivity of the FNCDs probe. Because of their excellent biological compatibility, the FNCDs were also successfully used to identify exogenous ClO^- in living cells. These FNCDs have promising prospects as novel sensitive and inexpensive probes for the detection of pollutants and in the pathological studies of clinical diseases.

Phenyl doped graphitic carbon nitride nanosheets for sensing of copper ions in living cells

Copper (Cu) is a vital metal element for humans and animals. Monitoring and evaluating the concentration level of Cu2+ in a biological body is an effective way to prevent a variety of diseases. In this work, phenyl doped graphitic carbon nitride (PDCN) nanosheets with strong green fluorescence exhibited a sensitive and selective detection for Cu2+ with a linear range from 0.1-2.0 μmol L-1. Furthermore, fluorescent imaging was applied to semiquantitatively detect Cu2+ in HeLa cells using PDCN nanosheets as the probe, which can avoid the interference of background autofluorescence. This work provided a low-cost and biologically friendly fluorescent probe to monitor the concentration level of Cu2+ in living cells.

Rosette-shaped graphitic carbon nitride acts as a peroxidase mimic in a wide pH range for fluorescence-based determination of glucose with glucose oxidase

Rosette-shaped graphitic carbon nitride (rosette-GCN) is described as a promising alternative to natural peroxidase for its application to fluorescence-based glucose assays. Rosette-GCN was synthesized via a rapid reaction between melamine and cyanuric acid for 10 min at 35 °C, followed by thermal calcination for 4 h. Importantly, rosette-GCN possesses a peroxidase-like activity, producing intense fluorescence from the oxidation of Amplex UltraRed in the presence of H₂O₂ over a broad pH-range of, including neutral pH; the peroxidase activity of rosette-GCN was ~ 10-fold higher than that of conventional bulk-GCN. This enhancement of peroxidase activity is presumed to occur because rosette-GCN has a significantly larger surface area and higher porosity while preserving its unique graphitic structure. Based on the high peroxidase activity of rosette-GCN along with the catalytic action of glucose oxidase (GOx), glucose was reliably determined down to 1.2 μM with a dynamic linear concentration range of 5.0 to 275.0 μM under neutral pH conditions. Practical utility of this strategy was also successfully demonstrated by determining the glucose levels in serum samples. This work highlights the advantages of GCNs synthesized via rapid methods but with unique structures for the preparation of enzyme-mimicking catalysts, thus extending their applications to the diagnostics field and other biotechnological fields. Graphical abstract.

Sensitive distance-based paper-based quantification of mercury ions using carbon nanodots and heating-based preconcentration

This article reports the first fluorescent distance-based paper device coupled with an evaporating preconcentration system for determining trace mercury ions (Hg2+) in water. The fluorescent nitrogen-doped carbon dots (NCDs) were synthesized by a one-step microwave method using citric acid and ethylenediamine. The fluorescence turn-off of the NCDs in the presence of Hg2+ was visualized with a common black light, and the distance of the quenched fluorescence correlated to Hg2+ concentration. The optimal conditions for pH, NCD concentration, sample volume, and reaction time were investigated. Heating preconcentration was used to improve the detection limits of the fluorescent distance-based paper device by a factor of 100. Under the optimal conditions, the naked eye limit of detection (LOD) was 5 μg L-1 Hg2+. This LOD is sufficient for monitoring drinking water where the maximum allowable mercury level is 6 μg L-1 as established by the World Health Organization (WHO). The fluorescent distance-based paper device was successfully applied for Hg2+ quantification in water samples without interference from other cations. The proposed method provides several advantages over atomic absorption spectroscopy including ease of use, inexpensive material and fabrication, and portability. In addition, the devices are simple to fabricate and have a long shelf-life (>5 months).

Polymer Brushes on Graphitic Carbon Nitride for Patterning and as a SERS Active Sensing Layer via Incorporated Nanoparticles

Graphitic carbon nitride (gCN) has a broad range of promising applications, from energy harvesting and storage to sensing. However, most of the applications are still restricted due to gCN poor dispersibility and limited functional groups. Herein, a direct photografting of gCN using various polymer brushes with tailorable functionalities via UV photopolymerization at ambient conditions is demonstrated. The systematic study of polymer brush-functionalized gCN reveals that the polymerization did not alter the inherent structure of gCN. Compared to the pristine gCN, the gCN-polymer composites show good dispersibility in various solvents such as water, ethanol, and tetrahydrofuran (THF). Patterned polymer brushes on gCN can be realized by employing photomask and microcontact printing technology. The polymer brushes with incorporated silver nanoparticles (AgNPs) on gCN can act as a multifunctional recyclable active sensing layer for surface-enhanced Raman spectroscopy (SERS) detection and photocatalysis. This multifunctionality is shown in consecutive cycles of SERS and photocatalytic degradation processes that can be applied to in situ monitor pollutants, such as dyes or pharmaceutical waste, with high chemical sensitivity as well as to water remediation. This dual functionality provides a significant advantage to our AgNPs/polymer-gCN with regard to state-of-the-art systems reported so far that only allow SERS pollutant detection but not their decomposition. These results may provide a new methodology for the covalent functionalization of gCN and may enable new applications in the field of catalysis, biosensors, and, most interestingly, environmental remediation.

Fluorescent assay based on phenyl-modified g-C3N4 nanosheets for determination of thiram

Phenyl-modified graphitic carbon nitride nanosheets (Ph-g-C₃N₄ NSs) were synthesized by a thermal copolymerization and ultrasonic exfoliation method. The Ph-g-C₃N₄ NSs are used as a fluorescent assay for determination of thiram. The results of X-ray photoelectron spectroscopy, ¹³C solid-state nuclear magnetic resonance and Fourier transform infrared spectra confirm that phenyl group is integrated into the heptazine network of g-C₃N₄. Compared to the g-C₃N₄ NSs, the Ph-g-C₃N₄ NSs show bigger stokes shift about 185 nm and higher fluorescence intensity. The fluorescence of Ph-g-C₃N₄ NSs is quenched by Cu²⁺ via the photo-induced electron transfer mechanism, which then recovers in the presence of thiram. The fluorescence restoring of Ph-g-C₃N₄ NSs is correlated with the concentration of thiram. Under the optimized conditions, the fluorescent intensity of g-C₃N₄ NSs at excitation/emission wavelengths of 310/455 nm give a linear range of 33.0-670 nM with detection limit of 9.90 nM. While fluorescent assay based on the Ph-g-C₃N₄ NSs show the linear range of 6.70-1300 nM at excitation/emission wavelengths of 310/495 nm with detection limit of 2.01 nM. Graphical abstract Schematic representation of fluorescent "on-off-on" assay based on phenyl-modified graphitic carbon nitride nanosheets (Ph-g-C₃N₄ NSs) for determination of thiram.

Functional Carbon Quantum Dots for Highly Sensitive Graphene Transistors for Cu2+ Ion Detection

Cu²⁺ ions play essential roles in various biological events that occur in the human body. It is important to establish an efficient and reliable detection of Cu²⁺ ions for people's health. The solution-gated graphene transistors (SGGTs) have been extensively investigated as a promising platform for chemical and biological sensing applications. Herein, highly sensitive and highly selective sensor for Cu²⁺ ion detection is successfully constructed based on SGGTs with gate electrodes modified by functional carbon quantum dots (CQDs). The sensing mechanism of the sensor is that the coordination of CQDs and Cu²⁺ ions induces the capacitance change of the electrical double layer (EDL) near the gate electrode and then results in the change of channel current. Compared to other metal ions, Cu²⁺ ions have an excellent binding nature with CQDs that make it an ultrahigh selective sensor. The CQD-modified sensor achieves excellent Cu²⁺ ion detection with a minimal level of concentration (1 × 10^-14 M), which is several orders of magnitude lower than the values obtained from other conventional detection methods. Interestingly, the device also displays a quick response time on the order of seconds. Due to the functionalized nature of CQDs, SGGTs with CQD-modified gate show good prospects to achieve multifunctional sensing platform in biochemical detections.

Colorimetric Assay Using Mesoporous Fe-Doped Graphitic Carbon Nitride as a Peroxidase Mimetic for the Determination of Hydrogen Peroxide and Glucose

Iron can enter the electron-rich cavities of graphitic carbon nitride (g-C₃N₄). On account of this phenomenon, Fe-doped g-C₃N₄ (Fe-g-C₃N₄) was prepared as a peroxidase mimetic by using one-step pyrolysis of urea and FeCl₃·6H₂O. Compared to g-C₃N₄, Fe-g-C₃N₄ has a large specific surface area due to the presence of mesopores and cracks, a smaller band gap, and a high loading of Fe in its structure. Thus, Fe-g-C₃N₄ exhibits greater peroxidase activity with a more obvious color change when using 3,3',5,5'-tetramethylbenzidine (TMB) as a substrate in the presence of hydrogen peroxide (H₂O₂). The color of a mixture of TMB and Fe-g-C₃N₄ gradually deepens with increasing concentrations of H₂O₂. Accordingly, a rapid, sensitive, and low-cost colorimetric assay for the detection of H₂O₂ was developed. After optimization, this method boasts a wide linear dynamic range for H₂O₂ detection from 0.005 to 400 μM (r² = 0.9971) with a detection limit of 0.005 μM. Because H₂O₂ is a main product of glucose oxidation by glucose oxidase (GOx), a colorimetric assay for glucose detection was also realized, with a linear dynamic range of 1-1000 μM (r² = 0.9996) and a detection limit of 0.5 μM. These assays were applied to the quantitative detection of H₂O₂ in milk and glucose in human serum, respectively.

Multicenter Metal-Organic Framework-Based Ratiometric Fluorescent Sensors

Metal-organic frameworks (MOFs) with multiple emission centers are newly emerging as ratiometric sensors owing to their high sensitivity and high selectivity toward a wide range of targeted functional species. Energy transfer between the light-absorbing group and emission centers and between different emission centers is the key to rationally design and synthesize MOF-based ratiometric sensors. A good match between the energy levels of the light-absorbing groups and emission centers is the prerequisite for MOF-based sensors to exhibit multiple emissions, and a good match of the MOF-based sensors and those of the targeted species can increase the sensitivity and selectivity, but this match is highly challenging to obtain via synthesis. MOFs with multiple emission centers can be produced by functionalizing MOFs with multiple lanthanide centers, organic luminophores, dyes, carbon dots, and other such emissive groups. In this progress report, recent advances in the strategies for synthesizing MOFs with multiple emission centers and their applications for ratiometric sensing of solution conditions, including the pH value, and ion, organic molecule, and biomolecule concentrations, are summarized, as are the related sensing mechanisms.

Interesting photoluminescence behaviour in graphitic carbon nitride quantum dots attached to PbCrO4 colloidal nanostructures

Highly luminescent graphitic carbon nitride quantum dots (CNQDs) are synthesized by a facile one-step hydrothermal route and studied the photoluminescence behaviour during in situ formation of CNQD–PbCrO₄ nano-composite.

Ultrasensitive photoelectrochemical sensor enabled by a target-induced signal quencher release strategy

In this work, a target-induced signal quencher release strategy was proposed to construct a sensitive photoelectrochemical (PEC) sensor.

Enhanced fluorescence probes based on Schiff base for recognizing Cu2+ and effect of different substituents on spectra

Three enhanced fluorescence probes based on Rhodamine B-Schiff base structure were synthesized for detecting Cu²⁺. The corresponding detection limits were found to be 0.25 μM, 0.15 μM and 0.18 μM. Binding ratio and binding sites were determined by Job's and nuclear magnetic titration experiments. The binding constants obtained by the Benesi-Hildebrand equation to be 341.0 M^-0.5,1.8 × 10⁴ M^-1, and 265.4 M^-0.5, respectively. As isomers, the different effects of probes on Cu²⁺ detection were researched. By adjusting the position and the size of the substituent group, the effects of binding sites and steric hindrance on the complexation ratio, response time and detection limit were discussed. Optimal spatial combination structure with Cu²⁺ was obtained through energy calculation. Detection mechanism of Rhodamine B ring opening based on the complex of the Schiff base with Cu²⁺ was confirmed. E. coli staining and detection of real water samples had expanded their applications.

Nitrogen-doped carbon dots as a probe for the detection of Cu2+ and its cellular imaging

Nitrogen-doped carbon dots were synthesized using citric acid monohydrate and glutathione as raw materials. The synthesized nitrogen-doped carbon dots were characterized by multiple analytical techniques, including transmission electron microscopy, Fourier transform infrared spectroscopy, ultraviolet–visible absorption spectroscopy, X-ray photoelectron spectroscopy, X-ray diffractometry, and fluorescence spectra. The fluorescence intensity of the nitrogen-doped carbon dots gradually quenched with different concentrations of Cu2+ ions. The effect of the pH value, the nitrogen-doped carbon dot concentration, and the reaction time on the fluorescence intensity of the N-CDs-Cu2+ system was investigated, and the experimental conditions were optimized. A rapid and sensitive method for the determination of Cu2+ ions was established that exhibited a good linearity in the concentration range 0.20–200.0 μM with a detection limit of 0.27 nM. Meanwhile, the fluorescence quenching mechanism of the interaction between nitrogen-doped carbon dots and Cu2+ was preliminarily discussed. The method was used to detect trace Cu2+ in tap water and lake water, with recoveries ranging from 98.1% to 102.0%. Furthermore, due to low cytotoxicity and good biocompatibility, nitrogen-doped carbon dots as a probe were also successfully used in bioimaging.

A Unique Interactive Nanostructure Knitting based Passive Sampler Adsorbent for Monitoring of Hg2+ in Water

This work reports the development of ultralight interwoven ultrathin graphitic carbon nitride (g-CN) nanosheets for use as a potential adsorbent in a passive sampler (PAS) designed to bind Hg²⁺ ions. The g-CN nanosheets were prepared from bulk g-CN synthesised via a modified high-temperature short-time (HTST) polycondensation process. The crystal structure, surface functional groups, and morphology of the g-CN nanosheets were characterised using a battery of instruments. The results confirmed that the as-synthesized product is composed of few-layered nanosheets. The adsorption efficiency of g-CN for binding Hg²⁺ (100 ng mL⁻¹) in sea, river, rain, and Milli-Q quality water was 89%, 93%, 97%, and 100%, respectively, at natural pH. Interference studies found that the cations tested (Co²⁺, Ca²⁺, Zn²⁺, Fe²⁺, Mn²⁺, Ni²⁺, Bi³⁺, Na⁺, and K⁺) had no significant effect on the adsorption efficiency of Hg²⁺. Different parameters were optimised to improve the performance of g-CN such as pH, contact time, and amount of adsorbent. Optimum conditions were pH 7, 120 min incubation time and 10 mg of nanosheets. The yield of nanosheets was 72.5%, which is higher compared to other polycondensation processes using different monomers. The g-CN sheets could also be regenerated up to eight times with only a 20% loss in binding efficiency. Overall, nano-knitted g-CN is a promising low-cost green adsorbent for use in passive samplers or as a transducing material in sensor applications.

Parameters affecting the synthesis of carbon dots for quantitation of copper ions

A simple, eco-friendly, and low-cost electrochemical approach has been applied to the synthesis of carbon dots (C dots) from histidine hydrochloride in the absence or presence of halides (Cl, Br, and I) at various potentials up to 10 V. The as-formed C dots refer to C dots, Cl-C, Br-C, and I-C dots. The time-evolution UV-vis absorption and photoluminescence (PL) spectra provide more detailed information about the formation of C dots. Upon increasing the reaction time from 1 to 120 min, more and more C dots are formed, leading to increased PL intensity. The halides play two important roles in determining the formation of C dots; controlling the reaction rate and surface states. When compared to chloride and bromide, iodide has a greater effect on varying surface states and inducing PL quenching through intersystem crossing. The PL intensities of the four types of C dots all decrease upon increasing Cu²⁺, Hg²⁺, and Ag⁺ concentrations. In the presence of 0.8 mM I^-, I-C dots compared to C dots, Cl-C dots, and Br-C dots are slightly better for quantitation of Cu²⁺. Fourier transform infrared spectroscopy, cyclic voltammetry, electrochemical impedance spectroscopy, and X-ray photoelectron spectroscopy results of I-C dots reveal the interactions of Cu²⁺ with the surface ligands (imidazole and histidine). The I-C dot probe in the presence of 0.8 mM I^- is selective toward Cu²⁺ over the tested metal ions such as Hg²⁺ and Ag⁺. The assay provides a limit of detection of 0.22 μM for Cu²⁺ at a signal-to-noise ratio of 3. Practicality of this probe has been validated by the analyses of tap, lake, and sea water samples, with negligible matrix effects.

γ-Aminobutyric acid-modified graphene oxide as a highly selective and low-toxic fluorescent nanoprobe for relay recognition of copper(II) and cysteine

A sensitive and selective graphene oxide (GO)-based fluorescent nanoprobe has been developed for the relay recognition of Cu²⁺ and cysteine (Cys) by covalently grafting γ-aminobutyric acid (GABA) onto GO. The fluorescence of the probe (with excitation/emission maxima at 360/445 nm) is selectively quenched by Cu²⁺ via static fluorescence quenching. Fluorescence drops linearly as the concentration of Cu²⁺ is increased from 50 nM to 1.0 µM, and the detection limit for Cu²⁺ is calculated as 15 nM. By virtue of the strong interaction between Cys and Cu²⁺, the GO-GABA/Cu²⁺ complex can further sensitively recognize Cys in a "switch-on" mode. The linear range for Cys detection is from 50 nM to 1.0 µM, and the detection limit is 38 nM. The probe has low cytotoxicity, and it works well inside living cells, which is verified by the successful application in imaging of LLC-PK1 cells. Graphical abstract Gamma-Aminobutyric Acid (GABA) modified graphene oxide (GO) is a highly selective nanoprobe for the fluorometric relay recognition of Cu²⁺ and Cys.

Fluorescence covalent interaction enhanced sensor for lead ion based on novel graphitic carbon nitride nanocones

Novel graphitic carbon nitride nanocones (g-CNNCs) were synthesized for the first time in this study. The SEM, TEM, XPS and FT-IR were used to research the structure of the g-CNNCs. We found that the g-CNNCs showed high selective and sensitive for fluorescence enhancement detection of Pb²⁺ ion via covalent interaction. In addition, the g-CNNCs exhibit stable and specific concentration-dependent fluorescence intensity in the presence of Pb²⁺ ion in the range of 1-200 μmol·dm^-3, and the limit of detection was estimated to be 0.0438 μmol·dm^-3 (3S/k). More importantly, the g-CNNCs were used to detect practical samples with satisfactory results.

Three-Dimensional Branched Crystal Carbon Nitride with Enhanced Intrinsic Peroxidase-Like Activity: A Hypersensitive Platform for Colorimetric Detection

Graphitic carbon nitride (g-C₃N₄) as a metal-free nanozyme has attracted huge attention for catalytic applications. However, the catalytic activity of pure g-C₃N₄ causes very moderate H₂O₂ activation. Herein, a novel three-dimensional (3D) branched carbon nitride nanoneedle (3DBC-C₃N₄) nanozyme has been proposed to overcome such shortcoming. This unique 3D branched structure of 3DBC-C₃N₄ facilitated effective mass transfer during catalytic reaction and induced a lightning rodlike effect to accelerate electron collection at the tip area for H₂O₂ activation. With improved H₂O₂ activation for hydroxyl radical (^•OH) generation, 3DBC-C₃N₄ showed excellent peroxidase-like activity toward 3,3',5,5'-tetramethylbenzidine oxidation in the presence of H₂O₂. As for H₂O₂, the V_max value of 3DBC-C₃N₄ was found to be 20 times higher than that of natural horseradish peroxidase. Moreover, the 3D branched structure of 3DBC-C₃N₄ offered large interface for the reversible conjugation of single-stranded DNA, which enhanced the colorimetric sensitivity. Moreover, 3DBC-C₃N₄ exhibited high sensitivity toward oxytetracycline detection, with the detection limit and quantitative limit of 1 and 50 μg/L, respectively.

One-pot fabrication of Fe-doped carbon nitride nanoparticles as peroxidase mimetics for H2O2 and glucose detection

Iron-doped carbon nitride nanoparticles (Fe-CNNPs) were prepared from citric acid, urea and ferric chloride through a convenient one-pot solvothermal method. Oleic acid was used as the reaction medium. The morphology and chemical composition of the obtained Fe-CNNPs were characterized by multiple methods including transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR). It is interesting to find that the Fe-CNNPs showed higher catalytic activity than horseradish peroxidase (HRP), and tetramethylbenzidine (TMB) can be catalytically oxidized in the presence of H₂O₂ to produce a color change in aqueous solution. As H₂O₂ can be generated in the oxidation process of glucose catalyzed by glucose oxidase (GOD), a novel sensitive method for the detection of glucose with a limit of detection (LOD) of 0.29 μM has been developed combined with the catalytic properties of GOD and Fe-CNNPs. The Fe-CNNPs with peroxidase mimetics activity may have potential applications in biotechnology field.

A highly turn-on fluorescent CHEF-type chemosensor for selective detection of Cu2+ in aqueous media

An efficient "turn on" fluorescence chemosensor Schiff base LH based on the combination of 2-Hydroxy-5-(p-tolyldiazenyl)benzaldehyde and N-(3-Aminopropyl)imidazole was prepared and characterized then evaluated for its selective fluorescent sensing of Cu²⁺ amongst other metal ions. The CN isomerization inhibition process induced by the Cu²⁺ binding warrants the chelation-induced enhanced fluorescence (CHEF) effect. In addition, the detection limit sensing of LH for Cu²⁺ was found to be 1.8 × 10^-6 M that is below the WHO recommendation level (20 μM) for drinking water.