Sensitive electrochemical aptamer biosensor for dynamic cell surface N-glycan evaluation featuring multivalent recognition and signal amplification on a dendrimer-graphene electrode interface

Selection of a DNA Aptamer against Zearalenone and Docking Analysis for Highly Sensitive Rapid Visual Detection with Label-Free Aptasensor

Contamination of feed with zearalenone (ZEN) presents a significant risk to animal health. Here, a visible, rapid, and cost-effective aptamer-based method is described for the detection of ZEN. After 8 rounds of SELEX (systematic evolution of ligands by exponential enrichment) with an affinity-based monitor and counter-screening process, the ssDNA aptamer Z100 was obtained, which had high affinity (dissociation constant = 15.2 ± 3.4 nM) and good specificity. Docking analysis of Z100 indicated that noncovalent bonds (π-π interactions, hydrogen bonds, and hydrophobic interactions) helped ZEN to anchor in the binding sites. Finally, a label-free detection method based on gold nanoparticles and Z100 at 0.25 μM was developed for ZEN determination. Excellent linearity was achieved, and the lowest detection limit was 12.5 nM. This rapid and simple method for ZEN analysis has high sensitivity and can be applied for on-site detection of ZEN in animal feeds.

Aptamer as capture agent in enzyme-linked apta-sorbent assay (ELASA) for ultrasensitive detection of Aflatoxin B1

Aflatoxin B₁ (AFB₁), is one of the most toxic mycotoxins found to contaminate various food commodities like cereals, dried fruits, tree nuts, spices and crude vegetable oils. In spite of considerable progress in analytical techniques, there is still a need to develop rapid and highly sensitive detection platforms for AFB₁. In this study, AFB₁ specific aptamer was used as a capture molecule to develop an enzyme-linked apta-sorbent assay (ELASA) for ultrasensitive detection of AFB₁. Under optimized conditions, the assay had a linear detection range from 1 μg to 1 pg with a limit of detection (LOD) of 1 pg/mL in buffer. Conventional ELISA with AFB₁ hapten as the capture agent (LOD = 10 pg/mL) was also carried out to compare the results with the present method. Recovery studies in food samples like dried red chillies, groundnut and pepper using both the methods was found to be in the range of 88.49-106.4% at 10 ng/mL and 87.4% to 95.8% at 5 ng/mL for ELASA and 76.56-127.68% at 10 ng/mL and 82-101.2% at 5 ng/mL for ELISA. Higher detection (10 fold) and better recovery using ELASA suggest that the method could offer an early, ultrasensitive, high-throughput, qualitative and semi-quantitative detection of AFB₁ in contaminated food samples.

Ti3C2 MXenes nanosheets catalyzed highly efficient electrogenerated chemiluminescence biosensor for the detection of exosomes

Exosomes have been reported to play an important role in the anti-tumor immune response, tumor diagnosis and other processes, and are promising biomarkers for early cancer diagnosis. In this work, a sensitive electrogenerated chemiluminescence (ECL) biosensor was developed for detection of exosomes using aptamer modified two-dimensional material Ti₃C₂ MXenes nanosheets as the ECL nanoprobe because of its large surface area, the excellent conductivity and catalytic properties. The exosomes can be high efficiently captured onto the electrode surface by an EpCAM protein recognized aptamer modified on the electrode surface. In addition, the ECL nanoprobe can also recognize the exosomes, and significantly enhanced the ECL signals of luminol. Based on this strategy, a highly sensitive ECL biosensor for MCF-7 exosomes detection was obtained. The detection limit is 125 particles μL^-1, which was over 100 times lower than that of conventional ELISA method. The as prepared ECL biosensor was performed successfully for MCF-7 exosomes detection in the serum. This strategy provided a feasible, sensitive and reliable tool for the exosomes detection in exosomes-related clinical diagnostics.

Nonenzymatic Amperometric Aptamer Cytosensor for Ultrasensitive Detection of Circulating Tumor Cells and Dynamic Evaluation of Cell Surface N-Glycan Expression

Dynamic assessment of glycan expression on the cell surface and accurate determination of circulating tumor cells are increasingly imperative for cancer diagnosis and therapeutics. Herein, a unique and versatile nonenzymatic sandwich-structured electrochemical cytosensor was developed. The cytosensor was constructed based on a cell-specific aptamer, the lectin-functionalized porous core-shell palladium gold nanoparticles (Pd@Au NPs). To establish the cytosensor, amine-modified-SYL3C aptamer was first attached to the surface of aminated Fe₃O₄@SiO₂ nanoparticles (Fe₃O₄@SiO₂-NH₂ NPs) through cross-linked reaction via glutaraldehyde. Besides, in terms of noncovalent assembly of concanavalin A on Pd@Au NPs, a lectin-functionalized nanoprobe was established. This nanoprobe had the capabilities of both the specific carbohydrate recognition and the current signal amplification in view of the Pd@Au NPs as the electrocatalyst for the reduction of hydrogen peroxide (H₂O₂). Herein, we used MCF-7 cells as a model target, and the constructed cytosensor showed a low detection limit (down to three cells), a wide linear detection ranging from 100 to 1 × 10⁶ cells mL^-1. The established method sensitively realized the detection of the amount of cell and exact evaluation of glycan expression on cell surface, demonstrating great application prospects.

Hapten-Grafted Programmed Probe as a Corecognition Element for a Competitive Immunosensor to Detect Acetamiprid Residue in Agricultural Products

We have developed an effective competitive electrochemical immunosensor assay based on hapten-grafted programmed probe (HGPP) as a corecognition element for highly sensitive and selective detection of acetamiprid. Starting with the synthesis of hapten, HGPP was prepared using carboxyl group in the hapten and amino group in the 5' end of the programmed probe through covalent conjugation. Acetamiprid present in samples competes with HGPP to bind with capture antibody on the electrodes by specific recognition interaction. Methylene blue probe (MBP) was used as the electrochemical redox probe to capture the hybridized HGPP on the electrodes. The competitive reaction changes in accordance with the quantity of the target acetamiprid in the sample, as the amounts of the hybridized HGPP and the immobilized antibody are constant, i.e., the more acetamiprid samples are added, the less MBP is combined on the electrodes. In the optimal conditions, thus, biosensor output showed a linear relationship from 5 to 10⁵ ng L^-1 for the acetamiprid assay with a detecting limit of 3.2 ng L^-1. The biosensor was successful in quantifying the amount of acetamiprid in spiked strawberry and cabbage extracts. This competitive immunosensor assay represents a rapid and sensitive technology for acetamiprid assay or other small molecule targets in food.

Aptamer-Based Biosensors to Detect Aquatic Phycotoxins and Cyanotoxins

Aptasensors have a great potential for environmental monitoring, particularly for real-time on-site detection of aquatic toxins produced by marine and freshwater microorganisms (cyanobacteria, dinoflagellates, and diatoms), with several advantages over other biosensors that are worth considering. Freshwater monitoring is of vital importance for public health, in numerous human activities, and animal welfare, since these toxins may cause fatal intoxications. Similarly, in marine waters, very effective monitoring programs have been put in place in many countries to detect when toxins exceed established regulatory levels and accordingly enforce shellfish harvesting closures. Recent advances in the fields of aptamer selection, nanomaterials and communication technologies, offer a vast array of possibilities to develop new imaginative strategies to create improved, ultrasensitive, reliable and real-time devices, featuring unique characteristics to produce and amplify the signal. So far, not many strategies have been used to detect aquatic toxins, mostly limited to the optic and electrochemical sensors, the majority applied to detect microcystin-LR using a target-induced switching mode. The limits of detection of these aptasensors have been decreasing from the nM to the fM order of magnitude in the past 20 years. Aspects related to sensor components, performance, aptamers sequences, matrices analyzed and future perspectives, are considered and discussed.

A DNA nanostructured aptasensor for the sensitive electrochemical detection of HepG2 cells based on multibranched hybridization chain reaction amplification strategy

Sensitive detection of cancer cells is beneficial to the early diagnosis of cancer and individual treatment. In the present study, a DNA nanostructured aptasensor was used for the sensitive electrochemical detection of human liver hepatocellular carcinoma cells (HepG2) based on multibranched hybridization chain reaction amplification strategy. We established a well-designed platform by immobilizing DNA tetrahedron, a three-dimensional DNA nanostructure, on the gold electrode to capture HepG2 cells more specifically and efficiently. Meanwhile, functional hybrid nanoprobes consisted of MIL-101@AuNPs (Au nanoparticles), numerous hemin/G-quadruplex DNAzyme from multibranched hybridization chain reaction, and natural horseradish peroxidase (HRP) was designed. The hybrid nanoprobes possessed the functions of specific discernment and enzymatic signal amplification simultaneously. With the help of nanoprobes, HepG2 cells were recognized and captured to form a DNA tetrahedron-cell-nanoprobe sandwich-like structure on the electrode surface. The lower detection limit of this established cytosensor is 5 cells per ml. Moreover, it delivered a broad detection range from 10² to 10⁷ cells per ml. The results revealed that the as-proposed cytosensor may be utilized as a powerful tool for early diagnosis of cancer in the future.

Organic Electrochemical Transistors for the Detection of Cell Surface Glycans

Cell surface glycans play critical roles in diverse biological processes, such as cell-cell communication, immunity, infection, development, and differentiation. Their expressions are closely related to cancer growth and metastasis. This work demonstrates an organic electrochemical transistor (OECT)-based biosensor for the detection of glycan expression on living cancer cells. Herein, mannose on human breast cancer cells (MCF-7) as the target glycan model, poly dimethyl diallyl ammonium chloride-multiwall carbon nanotubes (PDDA-MWCNTs) as the loading interface, concanavalin A (Con A) with active mannose binding sites, aptamer and horseradish peroxidase co-immobilized gold nanoparticles (HRP-aptamer-Au NPs) as specific nanoprobes are used to fabricate the OECT biosensor. In this strategy, PDDA-MWCNT interfaces can enhance the loading of Con A, and the target cells can be captured through Con A via active mannose binding sites. Thus, the expression of cell surface can be reflected by the amount of cells captured on the gate. Specific nanoprobes are introduced to the captured cells to produce an OECT signal because of the reduction of hydrogen peroxide catalyzed by HRP conjugated on Au nanoparticles, while the aptamer on nanoprobes can selectively recognize the MCF-7 cells. It is reasonable that more target cells are captured on the gate electrode, more HRP-nanoprobes are loaded thus a larger signal response. The device shows an obvious response to MCF-7 cells down to 10 cells/μL and can be used to selectively monitor the change of mannose expression on cell surfaces upon a treatment with the N-glycan inhibitor. The OECT-based biosensor is promising for the analysis of glycan expressions on the surfaces of different types of cells.

Metal-Organic Framework-Based Sensors for Environmental Contaminant Sensing

Increasing demand for timely and accurate environmental pollution monitoring and control requires new sensing techniques with outstanding performance, i.e., high sensitivity, high selectivity, and reliability. Metal-organic frameworks (MOFs), also known as porous coordination polymers, are a fascinating class of highly ordered crystalline coordination polymers formed by the coordination of metal ions/clusters and organic bridging linkers/ligands. Owing to their unique structures and properties, i.e., high surface area, tailorable pore size, high density of active sites, and high catalytic activity, various MOF-based sensing platforms have been reported for environmental contaminant detection including anions, heavy metal ions, organic compounds, and gases. In this review, recent progress in MOF-based environmental sensors is introduced with a focus on optical, electrochemical, and field-effect transistor sensors. The sensors have shown unique and promising performance in water and gas contaminant sensing. Moreover, by incorporation with other functional materials, MOF-based composites can greatly improve the sensor performance. The current limitations and future directions of MOF-based sensors are also discussed.

Nondestructive Analysis of Tumor-Associated Membrane Protein Integrating Imaging and Amplified Detection in situ Based on Dual-Labeled DNAzyme

Comprehensive analysis of the expression level and location of tumor-associated membrane proteins (TMPs) is of vital importance for the profiling of tumor cells. Currently, two kinds of independent techniques, i.e. ex situ detection and in situ imaging, are usually required for the quantification and localization of TMPs respectively, resulting in some inevitable problems.

Methods: Herein, based on a well-designed and fluorophore-labeled DNAzyme, we develop an integrated and facile method, in which imaging and quantification of TMPs in situ are achieved simultaneously in a single system. The labeled DNAzyme not only produces localized fluorescence for the visualization of TMPs but also catalyzes the cleavage of a substrate to produce quantitative fluorescent signals that can be collected from solution for the sensitive detection of TMPs.

Results: Results from the DNAzyme-based in situ imaging and quantification of TMPs match well with traditional immunofluorescence and western blotting. In addition to the advantage of two-in-one, the DNAzyme-based method is highly sensitivity, allowing the detection of TMPs in only 100 cells. Moreover, the method is nondestructive. Cells after analysis could retain their physiological activity and could be cultured for other applications.

Conclusion: The integrated system provides solid results for both imaging and quantification of TMPs, making it a competitive method over some traditional techniques for the analysis of TMPs, which offers potential application as a toolbox in the future.

Flow injection amperometric sandwich-type aptasensor for the determination of human leukemic lymphoblast cancer cells using MWCNTs-Pdnano/PTCA/aptamer as labeled aptamer for the signal amplification

In this research, we demonstrated a flow injection amperometric sandwich-type aptasensor for the determination of human leukemic lymphoblasts (CCRF-CEM) based on poly(3,4-ethylenedioxythiophene) decorated with gold nanoparticles (PEDOT-Au_nano) as a nano platform to immobilize thiolated sgc8c aptamer and multiwall carbon nanotubes decorated with palladium nanoparticles/3,4,9,10-perylene tetracarboxylic acid (MWCNTs-Pd_nano/PTCA) to fabricate catalytic labeled aptamer. In the proposed sensing strategy, the CCRF-CEM cancer cells were sandwiched between immobilized sgc8c aptamer on PEDOT-Au_nano modified surface electrode and catalytic labeled sgc8c aptamer (MWCNTs-Pd_nano/PTCA/aptamer). After that, the concentration of CCRF-CEM cancer cells was determined in presence of 0.1 mM hydrogen peroxide (H₂O₂) as an electroactive component. The attached MWCNTs-Pd_nano nanocomposites to CCRF-CEM cancer cells amplified the electrocatalytic reduction of H₂O₂ and improved the sensitivity of the sensor to CCRF-CEM cancer cells. The MWCNT-Pd_nano nanocomposite was characterized with transmission electron microscopy (TEM) and energy dispersive X-ray (EDX). The electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were used to confirm the stepwise changes in the electrochemical surface properties of the electrode. The proposed sandwich-type electrochemical aptasensor exhibited an excellent analytical performance for the detection of CCRF-CEM cancer cells ranging from 1.0 × 10¹ to 5.0 × 10⁵ cells mL^-1. The limit of detection was 8 cells mL^-1. The proposed aptasensor showed high selectivity toward CCRF-CEM cancer cells. The proposed aptasensor was also applied to the determination of CCRF-CEM cancer cells in human serum samples.

Nanotechnology in Glycomics: Applications in Diagnostics, Therapy, Imaging, and Separation Processes

This review comprehensively covers the most recent achievements (from 2013) in the successful integration of nanomaterials in the field of glycomics. The first part of the paper addresses the beneficial properties of nanomaterials for the construction of biosensors, bioanalytical devices, and protocols for the detection of various analytes, including viruses and whole cells, together with their key characteristics. The second part of the review focuses on the application of nanomaterials integrated with glycans for various biomedical applications, that is, vaccines against viral and bacterial infections and cancer cells, as therapeutic agents, for in vivo imaging and nuclear magnetic resonance imaging, and for selective drug delivery. The final part of the review describes various ways in which glycan enrichment can be effectively done using nanomaterials, molecularly imprinted polymers with polymer thickness controlled at the nanoscale, with a subsequent analysis of glycans by mass spectrometry. A short section describing an active glycoprofiling by microengines (microrockets) is covered as well.

Ultrasensitive electrochemical biosensor based on the oligonucleotide self-assembled monolayer-mediated immunosensing interface

Highly sensitive and selective quantitation of a variety of proteins over a wide concentration range is highly desirable for increased accuracy of biomarker detection or for multidisease diagnostics. In the present contribution, using human immunoglobulin G (HIgG) as the model target protein, an electrochemical ultrasensitive immunosensing platform was developed based on the oligonucleotide self-assembled monolayer-mediated (OSAM) sensing interface. For this immunosensor, the "signal-on" signaling mechanism and enzymatic signal amplification effect were integrated into one sensing architecture. Moreover, the thiolated flexible single-stranded DNAs immobilized onto gold electrode surface not only performs the wobbling motion to facilitate the electron transfer between the electrode surface and biosensing layer but also fundamentally prohibiting the direct interaction of proteins with gold substrate. Thus, the electrochemical signal could be efficiently enhanced and the unspecific adsorption or cross-reaction might be eliminated. As a result, utilizing the newly-proposed immunosensor, the HIgG can be detected down to 0.5 ng/mL, and the high detection specificity is offered. The successful design of OSAM and the highly desirable detection capability of new immunosensor are expected to provide a perspective for fabricating new robust immunosensing platform and for promising potential of oligonucleotide probe in biological research and biomedical diagnosis.

Ultrasensitive Photoelectrochemical Biosensing of Cell Surface N-Glycan Expression Based on the Enhancement of Nanogold-Assembled Mesoporous Silica Amplified by Graphene Quantum Dots and Hybridization Chain Reaction

An ultrasensitive photoelectrochemical (PEC) biosensor for N-glycan expression based on the enhancement of nanogold-assembled mesoporous silica nanoparticles (GMSNs) was fabricated, which also combined with multibranched hybridization chain reaction (mHCR) and graphene quantum dots (GQDs). In this work, the localized surface plasmon resonance, mHCR and GQDs-induced signal amplification strategies were integrated exquisitely and applied sufficiently. In the fabrication, after porous ZnO spheres immobilized on the Au nanorod-modified paper working electrode were sensitized by CdTe QDs, the GMSNs were assembled on the CdTe QDs. Then the photocurrent efficiency was improved by the sensitization of the CdTe QDs and the localized surface plasmon resonance of GMSNs. Successively, the products of mHCR with multiple biotins for multiple horseradish peroxidase binding and multiple branched arms for capturing the target cells were attached on the as-prepared electrode. The chemiluminescent (CL) emission with the aid of horseradish peroxidase served as an inner light source to excite photoactive materials for simplifying the instrument. Furthermore, the aptamer could capture the cancer cells by its highly efficient cell recognition ability, which avoided the conventional routing cell counting procedures. Meanwhile, the GQDs served as the signal amplication strategy, which was exerted in the process of N-glycan evaluation because the competitive absorption of exciting light and consumption of H₂O₂ served as the electron donor of the PEC system and the oxidant of the luminol-based CL system. This judiciously engineered biosensor offered a promising platform for the exploration of N-glycan-based physiological processes.

An electrochemical cytosensor for ultrasensitive detection of cancer cells using modified graphene–gold nanostructures

The ultrasensitive detection of human prostate metastatic cancer cells (Du-145) was investigated through a novel electrochemical cytosensor.

Electrochemical Aptatoxisensor Responses on Nanocomposites Containing Electro-Deposited Silver Nanoparticles on Poly(Propyleneimine) Dendrimer for the Detection of Microcystin-LR in Freshwater

A sensitive and reagentless electrochemical aptatoxisensor was developed on cobalt (II) salicylaldiimine metallodendrimer (SDD-Co(II)) doped with electro-synthesized silver nanoparticles (AgNPs) for microcystin-LR (L, l-leucine; R, l-arginine), or MC-LR, detection in the nanomolar range. The GCE|SDD-Co(II)|AgNPs aptatoxisensor was fabricated with 5' thiolated aptamer through self-assembly on the modified surface of the glassy carbon electrode (GCE) and the electronic response was measured using cyclic voltammetry (CV). Specific binding of MC-LR with the aptamer on GCE|SDD-Co(II)|AgNPs aptatoxisensor caused the formation of a complex that resulted in steric hindrance and electrostatic repulsion culminating in variation of the corresponding peak current of the electrochemical probe. The aptatoxisensor showed a linear response for MC-LR between 0.1 and 1.1 µg·L-1 and the calculated limit of detection (LOD) was 0.04 µg·L-1. In the detection of MC-LR in water samples, the aptatoxisensor proved to be highly sensitive and stable, performed well in the presence of interfering analog and was comparable to the conventional analytical techniques. The results demonstrate that the constructed MC-LR aptatoxisensor is a suitable device for routine quantification of MC-LR in freshwater and environmental samples.

Colorimetric Logic Gate for Pyrophosphate and Pyrophosphatase via Regulating the Catalytic Capability of Horseradish Peroxidase

By regulating the catalytic capability of horseradish peroxidase (HRP), an artful colorimetric assay platform for pyrophosphate (PPi) and pyrophosphatase (PPase) was unprecedentedly designed. In this work, Cu(I), generated by reducing Cu(II) in the presence of ascorbate, could inhibit HRP's catalytic capability of transforming colorless 3,3',5,5'-tetramethylbenzidine (TMB) into blue oxidized TMB (oxTMB). The robust coordination between PPi and Cu(II) is able to discourage the reduction of Cu(II) to Cu(I) effectively, thus restoring the original catalytic capability of HRP and regenerating blue-colored oxTMB. Upon PPase introduction, PPi would be hydrolyzed into orthophosphate, which could release Cu(II) free from the Cu(II)-PPi complex, and thus in turn allows the catalytic capability of HRP to be inhibited by Cu(I). HRP was activated or deactivated to different degrees depending on PPi or PPase levels, which could be indicated by using HRP-triggered catalytic system as a signal amplifier, thus paving a way for PPi and PPase sensing. Based on the colorimetric sensor for PPi and PPase, an "INH" logic gate was rationally constructed. With the merits of high sensitivity and selectivity, cost-effectiveness, and simplification, our proposed analytical system has also been verified to have potential to be utilized for enzyme inhibitor screening and diagnosis of PPase-related diseases.

In Situ Growth of Three-Dimensional Graphene Films for Signal-On Electrochemical Biosensing of Various Analytes

In this work, an in situ growth protocol is introduced to fabricate three-dimensional graphene films (3D GFs) on gold substrates, which are successfully utilized as working electrode for electrochemical detection of nucleic acid (microRNA) and protein (lysozyme) based on a signal-on sensing mechanism. To realize the bridge between the gold substrate and graphene film, a monolayer of 4-aminothiophenol is self-assembled on the substrate, which is then served as connectors for the growth of 3D GFs on the gold substrate by the hydrothermal reduction (HR) technique. Moreover, given the excellent properties, such as enlarged surface area, strong binding strength between 3D GFs and gold substrate, and improved conductivity, the proposed 3D GF-fabricated gold substrate is readily employed to the construction of electrochemical biosensing platforms through introduction of magnetic nanoparticles (MNPs) as probe carriers. On the basis of the strand displacement reaction and specific binding between aptamer and its target, the developed biosensors achieve signal-on detection of microRNA-155 (miR-155) and lysozyme (Lyz) with high sensitivity and selectivity and further successfully applied to human serum assay. Overall, the proposed strategy for in situ growth of 3D GFs provides a powerful tool for a wide range of applications, which is not limited to electrochemical biosensors and can be extended to other areas, such as electrocatalysis and electronic energy-related systems.

Versatile aptasensor for electrochemical quantification of cell surface glycan and naked-eye tracking glycolytic inhibition in living cells

Quantifying the glycan expression status on cell surfaces is of vital importance for insight into the glycan function in biological processes and related diseases. Here we developed a versatile aptasensor for electrochemical quantification of cell surface glycan by taking advantage of the cell-specific aptamer, and the lectin-functionalized gold nanoparticles acting as both a glycan recognition unit and a signal amplification probe. To construct the aptasensor, amine-functionalized mucin 1 protein (MUC1) aptamer was first covalently conjugated to carboxylated-magnetic beads (MBs) using the succinimide coupling (EDC-NHS) method. On the basis of the specific recognition between aptamer and MUC1 protein that overexpressed on the surface of MCF-7 cells, the aptamer conjugated MBs showed a predominant capability for cell capture with high selectivity. Moreover, a lectin-based nanoprobe was designed by noncovalent assembly of concanavalin A (ConA) on gold nanoparticles (AuNPs). This nanoprobe incorporated the abilities of both the specific carbohydrate recognition and the signal amplification based on the gold-promoted reduction of silver ions. By coupling with electrochemical stripping analysis, the proposed sandwich-type cytosensor showed an excellent analytical performance for the ultrasensitive detection of MCF-7 cells and quantification of cell surface glycan. More importantly, taking advantage of Con A-gold nanoprobe catalyzed silver enhancement, the proposed method was further used for naked-eye tracking glycolytic inhibition in living cells. This aptasensor holds great promise as a new point-of-care diagnostic tool for analyzing glycan expression on living cells and further helps cancer diagnosis and treatment.

Applying DNA rolling circle amplification in fluorescence imaging of cell surface glycans labeled by a metabolic method

Glycans on the cell surfaces are essential for cellular communication. Metabolically labeling glycans can introduce unnatural sugars into cellular glycans, which can facilitate further labeling. We report herein imaging cell surface glycosylation by using click chemistry and DNA rolling circle amplification (RCA) to improve detection sensitivity. Through the RCA amplification, the image resolution of a cell was significantly improved and much fewer unnatural sugars were used than required previously. The advantage of this method is that it avoids introducing too much unnatural sugar, which can interfere with normal, physiological cell function. Simultaneously, the enhanced fluorescence intensity conveniently facilitates the detection of cells' own biosynthetic glycans by simply using a microplate reader. The results indicate that the metabolically labelling ability is different for different carbohydrates and different cells. Next, the RCA technique was adopted in a fluorescence resonance energy transfer (FRET)-based methodology that facilitated the glycan imaging of specific proteins on the cell surface. This method is broadly applicable to imaging the glycosylation of cellular proteins. Our results highlight the applications of RCA in metabolic glycan labeling, which can be used to monitor the glycosylation status on cells, and study the means by which glycosylation regulates cell function.

Graphene oxide-based electrochemical label-free detection of glycoproteins down to aM level using a lectin biosensor

A label-free ultrasensitive impedimetric biosensor with lectin immobilised on graphene oxide (GO) for the detection of glycoproteins from 1 aM is shown here. This is the first time a functional lectin biosensor with lectin directly immobilised on a graphene-based interface without any polymer modifier has been described. The study also shows that hydrophilic oxidative debris present on GO has a beneficial effect on the sensitivity of (8.46 ± 0.20)% per decade for the lectin biosensor compared to the sensitivity of (4.52 ± 0.23)% per decade for the lectin biosensor built up from GO with the oxidative debris washed out.

Full Spectrum Visible LED Light Activated Antibacterial System Realized by Optimized Cu2O Crystals

Assisted by three-dimensional printing technology, we proposed and demonstrated a full spectrum visible light activated antibacterial system by using a combination of 500 nm sized Cu2O crystals and light-emitting diode (LED) lamps. Further improved antibacterial ratios were achieved, for the first time, with pure Cu2O for both Gram-positive bacteria and Gram-negative bacteria among all of the six different color LED lamps. For practical antibacterial applications, we revealed that the nonwoven fabric could act as excellent carrier for Cu2O crystals and provide impressive antibacterial performance. Furthermore, integrated with our self-developed app, the poly(ethylene terephthalate) film loaded with Cu2O crystals also showed significant antibacterial property, thus making it possible to be applied in field of touch screen. The present research not only provided a healthier alternative to traditional ultraviolet-based sterilization but also opened an auto-response manner to decrease the rate of microbial contamination on billions of touch screen devices.

A label-free electrochemical impedance aptasensor for cylindrospermopsin detection based on thionine-graphene nanocomposites

It is important to develop methods to determine cylindrospermopsin (CYN) at trace levels since CYN is a kind of widespread cyanobacterial toxin in water sources. In this study, a label-free impedimetric aptasensor has been fabricated for detecting CYN. In this case, the amino-substituted aptamer of CYN was covalently grafted onto the surface of the thionine-graphene (TH-G) nanocomposite through the cross-linker glutaraldehyde (GA). The reaction of the aptamer with CYN was monitored by electrochemical impedance spectroscopy because the CYN induced conformation change of the aptamer can cause a remarkable decrease of the electron transfer resistance. Under optimum conditions, the aptasensor exhibits high sensitivity and a low detection limit for CYN determination. The CYN can be quantified in a wide range of 0.39 to 78 ng mL(-1) with a good linearity (R(2) = 0.9968) and a low detection limit of 0.117 ng mL(-1). In addition, the proposed aptasensor displays excellent stability, reusability and reproducibility.

Interrogating Circulating Microsomes and Exosomes Using Metal Nanoparticles

A chip-based approach for electrochemical characterization and detection of microsomes and exosomes based on direct electro-oxidation of metal nanoparticles (MNPs) that specifically recognize surface markers of these vesicles is reported. It is found that exosomes and microsomes derived from prostate cancer cells can be identified by their surface proteins EpCAM and PSMA, suggesting the potential of exosomes and microsomes for use as diagnostic biomarkers.

Thiazole derivative-modified upconversion nanoparticles for Hg(2+) detection in living cells

Mercury ion (Hg(2+)) is an extremely toxic ion, which will accumulate in human bodies and cause severe nervous system damage. Therefore, the sensitive and efficient monitoring of Hg(2+) in human bodies is of great importance. Upconversion nanoparticle (UCNPs) based nano probes exhibit no autofluorescence, deep penetration depth and chemical stability in biological samples, as well as a large anti-stokes shift. In this study, we have developed thiazole-derivative-functionalized UCNPs, and employed an upconversion emission intensity ratio of 540 nm to 803 nm (I540/I803) as a ratiometric signal to detect Hg(2+) in living cells showing excellent photo stability and high selectivity. Our nano probe was characterized using transmission electron microscopy (TEM) and powder X-ray diffraction (PXRD). The low cytotoxicity of our probe was confirmed by an MTT assay and the UCL test in HeLa cells was carried out by confocal microscopy. Our results demonstrated that organic-dye-functionalized UCNPs should be a good strategy for detecting toxic metal ions when studying cellular biosystems.

Recent development of carbon electrode materials and their bioanalytical and environmental applications

New synthetic approaches, materials, properties, electroanalytical applications and perspectives of carbon materials are presented.

A facile one-step folic acid modified partially oxidized graphene for high sensitivity tumor cell sensing

A FA-modified POG cytosensor using a facile one step reaction was endowed with a more sensitive response to folate-expressing tumor cells than those sensors constructed by a two-step reaction.

Recent Progress in Lectin-Based Biosensors

This article reviews recent progress in the development of lectin-based biosensors used for the determination of glucose, pathogenic bacteria and toxins, cancer cells, and lectins. Lectin proteins have been widely used for the construction of optical and electrochemical biosensors by exploiting the specific binding affinity to carbohydrates. Among lectin proteins, concanavalin A (Con A) is most frequently used for this purpose as glucose- and mannose-selective lectin. Con A is useful for immobilizing enzymes including glucose oxidase (GOx) and horseradish peroxidase (HRP) on the surface of a solid support to construct glucose and hydrogen peroxide sensors, because these enzymes are covered with intrinsic hydrocarbon chains. Con A-modified electrodes can be used as biosensors sensitive to glucose, cancer cells, and pathogenic bacteria covered with hydrocarbon chains. The target substrates are selectively adsorbed to the surface of Con A-modified electrodes through strong affinity of Con A to hydrocarbon chains. A recent topic in the development of lectin-based biosensors is a successful use of nanomaterials, such as metal nanoparticles and carbon nanotubes, for amplifying output signals of the sensors. In addition, lectin-based biosensors are useful for studying glycan expression on living cells.

Carbon nanomaterials-based electrochemical aptasensors

Carbon nanomaterials (CNMs) have attracted increasing attention due to their unique electrical, optical, thermal, mechanical and chemical properties. CNMs are extensively applied in electronic, optoelectronic, photovoltaic and sensing devices fields, especially in bioassay technology. These excellent properties significantly depend on not only the functional atomic structures of CNMs, but also the interactions with other materials, such as gold nanoparticles, SiO2, chitosan, etc. This review systematically summarizes applications of CNMs in electrochemical aptasensors (ECASs). Firstly, definition and development of ECASs are introduced. Secondly, different ways of ECASs about working principles, classification and construction of CNMs are illustrated. Thirdly, the applications of different CNMs used in ECASs are discussed. In this review, different types of CNMs are involved such as carbon nanotubes, graphene, graphene oxide, etc. Besides, the newly emerging CNMs and CNMs-based composites are also discoursed. Finally, we demonstrate the future prospects of CNMs-based ECASs, and some suggestions about the near future development of CNMs-based ECASs are highlighted.

A Novel Electrochemiluminescence Immunosensor for the Analysis of HIV-1 p24 Antigen Based on P-RGO@Au@Ru-SiO₂ Composite

Ru(bpy)3(2+)-doped silica (Ru-SiO2) nanoparticles and gold-nanoparticle-decorated graphene (P-RGO@Au) were combined to form a P-RGO@Au@Ru-SiO2 composite. The composite was used to develop a novel sandwich-type electrochemiluminescence immunosensor for the analysis of HIV-1 p24 antigen. The composite worked as carrier to immobilize target antibody and to build a sandwich-type electrochemiluminescence immunosensor through an interaction between antigen and antibody. Importantly, high ECL signal could be obtained due to the large amounts of Ru(bpy)3(2+) molecules per Ru-SiO2 nanoparticle. The P-RGO@Au composite with good conductivity and high surface area not only accelerated the electron transfer rate but also improved the loading of both ECL molecules and capture antibody, which could further increase the ECL response and result in high sensitivity. Taking advantage of both Ru-SiO2 nanoparticles and the P-RGO@Au composite, the proposed immunosensor exhibited a linear range from 1.0 × 10(-9) to 1.0 × 10(-5) mg mL(-1) with a detection limit of 1.0 × 10(-9) mg mL(-1) for HIV-1 p24 antigen. The proposed ECL immunosensor was used to analyze HIV-1 p24 antigen in human serum, and satisfactory recoveries were obtained, indicating that the proposed method is promising for practical applications in the clinical diagnosis of HIV infection.