Versatile Types of Organic/Inorganic Nanohybrids: From Strategic Design to Biomedical Applications

An Improved Multiple Competitive Immuno-SERS Sensing Platform and Its Application in Rapid Field Chemical Toxin Screening

Improving the signal-to-noise ratio (SNR) by amplifying the outputting signal or reducing nonspecific binding (NSB) are the key techniques in multiple immunoassay. Aiming at these issues, this paper presents an improved multiple indirect competitive immune surface-enhanced Raman scattering (ci-SERS) assay for the rapid screening of highly toxic rodenticides in food and biological samples, which ensured remarkable accuracy, ultra-sensitivity and reproducibility. The non-fouling polymer brush grafted magnetic beads (the MB@P-CyM) were prepared as multiple competitive recognition substrates after conjugating triplex haptens (the MB@P-CyM-hap). It was demonstrated that the particular 3D hair-like structures of P-CyM not only facilitate conjugate high-density hapten but reduce the steric hindrance from SERS probes recognition, thus enhancing SNB. On the other hand, Au nanoflowers (AuNFs) of high SERS activity were synthesized using a simple one-pot hydrazine reduction. For simultaneously detecting three highly toxic rodenticides, i.e., diphacinone (DPN), bromadiolone (BRD) and tetramine (TET), the obtained AuNFs were fabricated as a SERS-encoded nanoprobe cocktail after successively labeling mono-antibodies/Raman probes. By integrating the MB@P-CyM-hap with the SERS-encoded cocktail, a highly sensitive multiple SERS assay was achieved in less than 2 h with a limit of detection of 0.62 ng mL^-1 for BRD, 0.42 ng mL^-1 for TET and 1.37 ng mL^-1 for DPN, respectively. The recoveries of these rodenticides in spiked food and biological samples were determined and ranged from 72 to 123%. Above all, the proposed modifications show remarkable improvements for high efficient multiple chemical toxin immunoassay.

Oncocyte Membrane-Camouflaged Multi-Stimuli-Responsive Nanohybrids for Synergistic Amplification of Tumor Oxidative Stresses and Photothermal Enhanced Cancer Therapy

The combination of various therapeutic modalities has received considerable attention for improving antitumor performance. Herein, an innovative nanohybrid, namely CaO₂@FePt-DOX@PDA@CM (CFDPM), was developed for synergistic chemotherapy/chemodynamic therapy/Ca²⁺ overloading-mediated amplification of tumor oxidative stress and photothermal enhanced cancer therapy. Camouflage of the 4T1 cell membrane enabled CFDPM to escape the immune surveillance and accumulate in the tumor tissue. Ca²⁺, released from CaO₂, could lead to mitochondrial dysfunction and facilitate the production of reactive oxygen species to amplify intracellular oxidative stress. Meanwhile, the increase of H₂O₂ concentration could enhance the efficiency of the chemodynamic therapy (CDT). Moreover, the hypoxic condition could be alleviated remarkably, which is attributed to the sufficient O₂ supply by CaO₂, resulting in the suppression of drug resistance and promotion of the chemotherapeutic effect. The nanohybrids involving Ca²⁺ overloading/CDT/chemotherapy could synergistically amplify the tumor oxidative stresses and remarkably aggravate the death of cancer cells. Significantly, the excellent photothermal conversion performance of CFDPM could further promote the tumoricidal effect. The in vitro and in vivo studies revealed that CFDPM could effectively advance the therapeutic efficiency via the cooperation of various therapeutic modalities to optimize their individual virtue, which would open a valuable avenue for effective cancer treatment.

Vacancy defect-promoted nanomaterials for efficient phototherapy and phototherapy-based multimodal Synergistic Therapy

Phototherapy and multimodal synergistic phototherapy (including synergistic photothermal and photodynamic therapy as well as combined phototherapy and other therapies) are promising to achieve accurate diagnosis and efficient treatment for tumor, providing a novel opportunity to overcome cancer. Notably, various nanomaterials have made significant contributions to phototherapy through both improving therapeutic efficiency and reducing side effects. The most key factor affecting the performance of phototherapeutic nanomaterials is their microstructure which in principle determines their physicochemical properties and the resulting phototherapeutic efficiency. Vacancy defects ubiquitously existing in phototherapeutic nanomaterials have a great influence on their microstructure, and constructing and regulating vacancy defect in phototherapeutic nanomaterials is an essential and effective strategy for modulating their microstructure and improving their phototherapeutic efficacy. Thus, this inspires growing research interest in vacancy engineering strategies and vacancy-engineered nanomaterials for phototherapy. In this review, we summarize the understanding, construction, and application of vacancy defects in phototherapeutic nanomaterials. Starting from the perspective of defect chemistry and engineering, we also review the types, structural features, and properties of vacancy defects in phototherapeutic nanomaterials. Finally, we focus on the representative vacancy defective nanomaterials recently developed through vacancy engineering for phototherapy, and discuss the significant influence and role of vacancy defects on phototherapy and multimodal synergistic phototherapy. Therefore, we sincerely hope that this review can provide a profound understanding and inspiration for the design of advanced phototherapeutic nanomaterials, and significantly promote the development of the efficient therapies against tumor.

Redox-Unlockable Nanoparticle-Based MST1 Delivery System to Attenuate Hepatic Steatosis via the AMPK/SREBP-1c Signaling Axis

To date, few effective treatments have been licensed for nonalcoholic fatty liver disease (NAFLD), which a kind of chronic liver disease. Mammalian sterile 20-like kinase 1 (MST1) is reported to be involved in the development of NAFLD. Thus, we evaluated the suitability of a redox-unlockable polymeric nanoparticle Hep@PGEA vector to deliver MST1 or siMST1 (HCP/MST1 or HCP/siMST1) for NAFLD therapy. The Hep@PGEA vector can efficiently deliver the condensed functional nucleic acids MST1 or siMST1 into NAFLD-affected mouse liver to upregulate or downregulate MST1 expression. The HCP/MST1 complexes significantly improved liver insulin resistance sensitivity and reduced liver damage and lipid accumulation by the AMPK/SREBP-1c pathway without significant adverse events. Instead, HCP/siMST1 delivery exacerbates the NAFLD. The analysis of NAFLD patient samples further clarified the role of MST1 in the development of hepatic steatosis in patients with NAFLD. The MST1-based gene intervention is of considerable potential for clinical NAFLD therapy, and the Hep@PGEA vector provides a promising option for NAFLD gene therapy.

Management of fluorescent organic/inorganic nanohybrids for biomedical applications in the NIR-II region

Biomedical fluorescence imaging in the second near-infrared (NIR-II, 100-1700 nm) window provides great potential for visualizing physiological and pathological processes, owing to the reduced tissue absorption, scattering, and autofluorescence. Various types of NIR-II probes have been reported in the past decade. Among them, NIR-II organic/inorganic nanohybrids have attracted widespread attention due to their unique properties by integrating the advantages of both organic and inorganic species. Versatile organic/inorganic nanohybrids provide the possibility of realizing a combination of functions, controllable size, and multiple optical features. This tutorial review summarizes the reported organic and inorganic species in nanohybrids, and their biomedical applications in NIR-II fluorescence and lifetime imaging. Finally, the challenges and outlook of organic/inorganic nanohybrids in biomedical applications are discussed.

Property evaluation of two anticancer candidate platinum complexes with N-isobutyl glycine ligand against human colon cancer

Small molecules have potential usage in cancer therapy due to their remarkable potency of disarranging the natural structure of nucleic acids. In this study, two complexes [Pt(NH₃)₂(IBgly)]NO₃ (1) and [Pt(bipy)(IBgly)]NO₃ (2) based on Pt(II), N-isobutylglycine (IBgly), 2,2'-bipyridine, and ammonia were prepared and characterized by spectroscopic methods. Pharmacokinetic ADME data, absorption, distribution, metabolism, excretion, and bioavailability radar showed two complexes can be introduced for Pt-based anti-cancer drugs. Mechanism of tumor inhibition and DNA interaction of these compounds was studied by UV-Vis, fluorescence, and CD spectroscopies. Also, thermodynamic parameters and the binding constants were calculated through absorption measurements. The fluorescence data showed that a static quenching mechanism occurred for both complexes with a binding constant and binding affinity towards DNA (K_b ≈ 3500 M^-1 and k_q ≈ 2.1 × 10¹¹ M^-1 s^-1). The thermodynamic parameters indicated electrostatic approaching and groove binding were more feasible than intercalation mode between Pt(II) complexes and DNA. CD spectra indicated the increasing intensity of the positive band and the negative band decreasing. Density functional theory calculations confirmed the experimental data and determined the quantum chemical descriptors including total energy, hardness, chemical potential, electrophilicity, electronegativity, etc. According to this, the binding tendency of these compounds with DNA could be predicted. Further, molecular docking studies were also performed. Docking studies revealed that the desolvation, hydrogen, and electrostatic binding were effective for the interaction between complexes and DNA with binding energy (- 10.44 and - 9.57 kcal/mol) for complexes 1 and 2, respectively, which is mainly of partially electrostatic and groove binding type. The cytotoxic activity of Pt complexes was examined against human colon cancer cell line which indicated good activity with IC₅₀ values of (41.66 and 47.30 μM) for both complexes after 72 h, respectively. Also, they demonstrated more inhibitory effects compared to carboplatin.

Copper-based metal-organic frameworks for biomedical applications

Metal-organic frameworks (MOFs) are a class of important porous, crystalline materials composed of metal ions (clusters) and organic ligands. Owing to the unique redox chemistry, photochemical and electrical property, and catalytic activity of Cu^2+/+, copper-based MOFs (Cu-MOFs) have been recently and extensively explored in various biomedical fields. In this review, we first make a brief introduction to the synthesis of Cu-MOFs and their composites, and highlight the recent synthetic strategies of two most studied representatives, three-dimensional HKUST-1 and two-dimensional Cu-TCPP. The recent advances of Cu-MOFs in the applications of cancer treatment, bacterial inhibition, biosensing, biocatalysis, and wound healing are summarized and discussed. Furthermore, we propose a prospect of the future development of Cu-MOFs in biomedical fields and beyond.

Advances of functional nanomaterials for magnetic resonance imaging and biomedical engineering applications

Functional nanomaterials have been widely used in biomedical fields due to their good biocompatibility, excellent physicochemical properties, easy surface modification, and easy regulation of size and morphology. Functional nanomaterials for magnetic resonance imaging (MRI) can target specific sites in vivo and more easily detect disease-related specific biomarkers at the molecular and cellular levels than traditional contrast agents, achieving a broad application prospect in MRI. This review focuses on the basic principles of MRI, the classification, synthesis and surface modification methods of contrast agents, and their clinical applications to provide guidance for designing novel contrast agents and optimizing the contrast effect. Furthermore, the latest biomedical advances of functional nanomaterials in medical diagnosis and disease detection, disease treatment, the combination of diagnosis and treatment (theranostics), multi-model imaging and nanozyme are also summarized and discussed. Finally, the bright application prospects of functional nanomaterials in biomedicine are emphasized and the urgent need to achieve significant breakthroughs in the industrial transformation and the clinical translation is proposed. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Diagnostic Tools > Diagnostic Nanodevices Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

Gold-seaurchin based immunomodulator enabling photothermal intervention and αCD16 transfection to boost NK cell adoptive immunotherapy

Despite huge potentials of NK cells in adoptive cell therapy (ACT), formidable physical barriers of the tumor tissue and deficiency of recognizing signals on tumor cells severely prevent NK cell infiltrating, activating and killing performances. Herein, a nano-immunomodulator AuNSP@αCD16 (CD16 antibody encoding plasmid) is explored to remodel the tumor microenvironment (TME) for improving the antitumor effects of adoptive NK cells. The as-prepared AuNSP, with a seaurchin-like gold core and a cationic polymer shell, exhibited a high gene transfection efficiency and a stable NIR-II photothermal capacity. The AuNSP could trigger mild photothermal intervention to partly destroy tumors and collapse the dense physical barriers, making a permeable TME for NK cell infiltration. What's more, the AuNSP could achieve αCD16 gene transfection to modify tumor surface with CD16 antibody, marking a unique structure on tumor cells for NK cell recognition and then lead to strong NK cell activation by CD16-mediated antibody-dependent cellular cytotoxicity (ADCC). As expected, the designed AuNSP@αCD16 induced an immune-favorable TME for NK cell performing killing functions against solid tumors, increasing the release of cytolytic granules and proinflammatory cytokines, which ultimately achieved a robustly boosted NK cell-based immunotherapy. Hence, the AuNSP@αCD16-mediated TME reconstituting strategy provides a substantial perspective for NK-based ACT on solid tumors. STATEMENT OF SIGNIFICANCE: In adoptive cell therapy (ACT), natural killer (NK) cells exhibit greater off-the-shelf utility and improved safety comparing with T cells, but the efficacy of NK cell therapy is severely compromised by formidable physical barriers of the tumor tissue and deficiency of NK cell recognizing signals on tumor cells. Herein, a nano-immunomodulator AuNSP@αCD16, with the abilities of inducing mild photothermal intervention and modifying the tumor cell surface with αCD16, is explored to reconstruct an infiltration-favorable and activation-facilitating tumor microenvironment for NK cells to perform killing functions. Such a simple and safe strategy is believed as a very promising candidate for future NK-based ACT.

Carboxymethylcellulose biofunctionalized ternary quantum dots for subcellular-targeted brain cancer nanotheranostics

Among the most lethal forms of cancer, malignant brain tumors persist as one of the greatest challenges faced by oncologists, where nanotechnology-driven theranostics can play a critical role in developing novel polymer-based supramolecular nanoarchitectures with multifunctional and multi-modal characteristics to fight cancer. However, it is virtually a consensus that, besides the complexity of active delivering anticancer drugs by the nanocarriers to the tumor site, the current evaluation methods primarily relying on in vitro assays and in vivo animal models have been accounted for the low translational effectiveness to clinical applications. In this view, the chick chorioallantoic membrane (CAM) assay has been increasingly recognized as one of the best preclinical models to study the effects of anticancer drugs on the tumor microenvironment (TME). Thus, in this study, we designed, characterized, and developed novel hybrid nanostructures encompassing chemically functionalized carboxymethylcellulose (CMC) with mitochondria-targeting pro-apoptotic peptide (KLA) and cell-penetrating moiety (cysteine, CYS) with fluorescent inorganic semiconductor (Ag-In-S, AIS) for simultaneously bioimaging and inducing glioblastoma cancer cell (U-87 MG, GBM) death. The results demonstrated that the CMC-peptide macromolecules produced supramolecular vesicle-like nanostructures with aqueous colloidal stability suitable as nanocarriers for passive and active targeting of cancer tumors. The optical properties and physicochemical features of the nanoconjugates confirmed their suitability as photoluminescent nanoprobes for cell bioimaging and intracellular tracking. Moreover, the results in vitro demonstrated a notable killing activity towards GBM cells of cysteine-bearing CMC conjugates coupled with pro-apoptotic KLA peptides. More importantly, compared to doxorubicin (DOX), a model anticancer drug in chemotherapy that is highly toxic, these innovative nanohybrids nanoconjugates displayed higher lethality against U-87 MG cancer cells. In vivo CAM assays validated these findings where the nanohybrids demonstrated a significant reduction of GBM tumor progression (41% area) and evidenced an antiangiogenic activity. These results pave the way for developing polymer-based hybrid nanoarchitectonics applied as targeted multifunctional theranostics for simultaneous imaging and therapy against glioblastoma while possibly reducing the systemic toxicity and side-effects of conventional anticancer chemotherapeutic agents.

Gold nanomaterials for oral cancer diagnosis and therapy: Advances, challenges, and prospects

Early diagnosis and treatment of oral cancer are vital for patient survival. Since the oral cavity accommodates the second largest and most diverse microbiome community after the gut, the diagnostic and therapeutic approaches with low invasiveness and minimal damage to surrounding tissues are keys to preventing clinical intervention-related infections. Gold nanoparticles (AuNPs) are widely used in the research of cancer diagnosis and therapy due to their excellent properties such as surface-enhanced Raman spectroscopy, surface plasma resonance, controlled synthesis, the plasticity of surface morphology, biological safety, and stability. AuNPs had been used in oral cancer detection reagents, tumor-targeted therapy, photothermal therapy, photodynamic therapy, and other combination therapies for oral cancer. AuNPs-based noninvasive diagnosis and precise treatments further reduce the clinical intervention-related infections. This review is focused on the recent advances in research and application of AuNPs for early screening, diagnostic typing, drug delivery, photothermal therapy, radiotherapy sensitivity treatment, and combination therapy of oral cancer. Distinctive reports from the literature are summarized to highlight the latest advances in the development and application of AuNPs in oral cancer diagnosis and therapy. Finally, this review points out the challenges and prospects of possible applications of AuNPs in oral cancer diagnosis and therapy.

Acid-Responsive Nanoporphyrin Evolution for Near-Infrared Fluorescence-Guided Photo-Ablation of Biofilm

Combating biofilm infections remains a challenge due to the shield and acidic conditions. Herein, an acid-responsive nanoporphyrin (PN3-NP) based on the self-assembly of a water-soluble porphyrin derivative (PN3) is constructed. Additional kinetic control sites formed by the conjugation of the spermine molecules to a porphyrin macrocycle make PN3 self-assemble into stable nanoparticles (PN3-NP) in the physiological environment. Noteworthily, near-infrared (NIR) fluorescence monitoring and synergistic photodynamic therapy (PDT) and photothermal therapy (PTT) effects of PN3-NP can be triggered by the acidity in biofilms, accompanied by intelligent transformation into dot-like nanospheres. Thus, damage to normal tissue is effectively avoided and accurate diagnosis and treatment of biofilms is achieved successfully. The good results of fluorescence imaging-guided photo-ablation of antibiotic-resistant strains methicillin-resistant Staphylococcus aureus (MRSA) biofilms verify that PN3-NP is a promising alternative to antibiotics. Meanwhile, this strategy also opens new horizons to engineer smart nano-photosensitizer for accurate diagnosis and treatment of biofilms.

Nanocomposite Polymer Colloids Prepared via Emulsion Polymerization and Stabilized Using Polydopamine-Coated Silica Particles

Polymer/inorganic colloidal nanocomposites can be prepared via Pickering emulsion polymerization (PEP); however, this process usually requires the use of surfactants, auxiliary comonomers, and volatile organic compounds. Herein, we report a versatile and efficient method for synthesizing stable monodisperse polymer/silica colloidal nanocomposite particles via PEP. First, silica nanoparticles were modified by depositing a multifunctional polydopamine (PDA) film. The outermost PDA film could enhance the precipitation of oligomeric polymer radicals on the silica surface, which is crucial for the preparation of stable polymer/inorganic colloidal nanocomposites via PEP. Notably, this PDA modification approach can employ different initiator systems, such as cationic initiators and redox initiator couples, and can be applied to various monomers and monomer pairs (St, St/nBA, MMA, MMA/nBA, Vac, Vac/nBA). The influence of the concentration and size of polydopamine-coated silica (SiO₂@PDA) on the colloidal nanocomposite was investigated. Increasing the diameter of SiO₂@PDA and decreasing the concentration of SiO₂@PDA both lead to the formation of larger nanocomposite particles. Considering its wide applicability, the proposed PDA modification approach can be applied to other functional inorganic particles to prepare multifunctional polymer/inorganic nanocomposite particles.

Enhanced reduction of nitrobenzene derivatives using reusable Ni nanoparticles supported on multi-layered poly(1,2-phenylenediamine)-coated layered double hydroxides

Recently, nanomaterials with layered double hydroxide (LDH) cores have been the subject of intense research regarding their promising applications in organic synthesis. In this study, nitrobenzene reduction is investigated by designing and synthesizing a novel LDH-based heterogeneous catalyst containing a nickel-1,2-phenylenediamine complex. The Cu–Zn–Al LDH was functionalized with copolymer bearing a glycidyl methacrylate (GMA) linkage that makes it suitable for grafting with 1,2-phenylenediamine. Overall, the synthesized LDH@MPS-GMA-PDA-Ni was found to be a highly efficient heterogeneous nanocatalyst that can catalyze nitroarene reduction with high yields under mild conditions.

pH-Responsive hyaluronic acid-cloaked polycation/gold nanohybrids for tumor-targeted synergistic photothermal/gene therapy

The combination of photothermal therapy (PTT) and gene therapy (GT) has attracted intense interest in cancer treatment. However, the lack of long circulation and active tumor targeting reduces the therapeutic efficacy of complementary PTT/GT. In this work, hyaluronic acid (HA)-cloaked gold nanorods-PGED (prepared by ring-opening of polyglycidyl methacrylate (PGMA) with ethylenediamine (ED))/pDNA (AP/pDNA-HA) complexes were prepared to achieve long circulation and tumor targeting for photoacoustic imaging (PAI)-guided synergistic PTT/GT. Gold nanorods endow the complexes with photothermal effect and PAI function. Benefiting from the HA cloak, the AP/pDNA-HA complexes exhibit excellent stability, biocompatibility, long circulation behavior and active targeting. In addition, the pH-responsive characteristic of the Schiff base bonds helps the AP/pDNA-HA complexes to effectively escape from the endosome/lysosome. The antioncogene p53 was employed to investigate the gene transfection efficiency of the delivery system both in vitro and in vivo. The superiority of synergistic PTT/GT is established in a mouse 4T1 breast tumor model. The current study provides a facile strategy for constructing multifunctional gene delivery systems with long circulation and tumor targeting features, which can achieve effective imaging-guided synergistic tumor treatment.

One-Pot Synthesis of Customized Metal-Phenolic-Network-Coated AIE Dots for In Vivo Bioimaging

The integration of aggregation-induced emission luminogens (AIEgens) and inorganic constituents to generate multifunctional nanocomposites has attracted much attention because it couples the bright aggregate-state fluorescence of AIEgens with the diverse imaging modalities of inorganic constituents. Herein, a facile and universal strategy to prepare metal-phenolic-network (MPN)-coated AIE dots in a high encapsulation efficiency is reported. Through precise control on the nucleation of AIEgens and deposition of MPNs in tetrahydrofuran/water mixtures, termed as coacervation, core-shell MPN-coated AIE dots with bright emission are assembled in a one-pot fashion. The optical properties of MPN-coated AIE dots can be readily tuned by varying the incorporated AIEgens. Different metal ions, such as Fe³⁺ , Ti⁴⁺ , Cu²⁺ , Ni²⁺ , can be introduced to the nanoparticles. The MPN-coated AIE dots with a red-emissive AIEgen core are successfully used to perform magnetic resonance/fluorescence dual-modality imaging in a tumor-bearing mouse model and blood flow visualization in a zebrafish larva. It is believed that the present study provides a tailor-made nanoplatform to meet the individual needs of in vivo bioimaging.

Metal-Organic Framework-Based Nanoheater with Photo-Triggered Cascade Effects for On-Demand Suppression of Cellular Thermoresistance and Synergistic Cancer Therapy

Nanomedicine with stable light-heat conversion and spatiotemporally controllable drug activation is crucial for the success of photothermal therapy (PTT). Herein, a metal-organic framework (MOF)-based nanoheater with light-triggered multi-responsiveness is engineered to in-situ and on-demand sensitize cancer cells to local hyperthermia. Well-dispersed platinum nanoparticles synthesized inside nanospaces of the MOF are employed as the near-infrared (NIR)-harvesting unit with stable and high light-heat conversion performance. A conformation switchable polymer shell is constructed as a secondary light-responding unit to gate the targeted activation of a molecular inhibitor against thermoresistance. By cascade transformation of light stimuli to downstream signals, the nanoheater enables inhibitor release to go with local heating at the same time restricted in lesion sites to maximize efficacy and minimize systemic toxicity. The efficient photothermal conversion and the blockage of cellular heat-protective pathways provide a dual-mode of action which selectively sensitizes cancer cells to hyperthermia in a spatiotemporally controlled manner. With NIR as the remote switch, the MOF-based nanosystem demonstrates localized and boosted PTT efficacy against cancer both in vitro and in vivo. These results present nanosized MOFs as tailorable and versatile platforms for synergistic and precise cancer therapy.

Nanomedicine-Based Delivery Strategies for Breast Cancer Treatment and Management

Breast cancer is one of the most common types of cancer among women globally. It is caused by mutations in the estrogen/progesterone receptors and conventional treatment methods are commonly utilized. About 70–80 percent of individuals with the early-stage non-metastatic disease may be cured. Conventional treatment is far less than the optimal ratio, as demonstrated through the high mortality rate of women with this cancer. However, conventional treatment methods like surgery, radiotherapy, and chemotherapy are not as effective as expected and lead to concerns about low bioavailability, low cellular uptake, emerging resistance, and adverse toxicities. A nanomedicine-based approach is a promising alternative for breast cancer treatment. The present era is witnessing rapid advancements in nanomedicine as a platform for investigating novel therapeutic applications and modern intelligent healthcare management strategies. This paper focuses on nanomedicine-based therapeutic interventions that are becoming more widely accepted for improving treatment effectiveness and reducing undesired side effects in breast cancer patients. By evaluating the state-of-the-art tools and taking the challenges involved into consideration, various aspects of the proposed nano-enabled therapeutic approaches have been discussed in this review.

Orchestrated Yolk-Shell Nanohybrids Regulate Macrophage Polarization and Dendritic Cell Maturation for Oncotherapy with Augmented Antitumor Immunity

The protumoral and immunosuppressive tumor microenvironments greatly limit the antitumor immune responses of nanoparticles for cancer immunotherapy. Here, the intrinsic immunomodulatory effects of orchestrated nanoparticles and their ability to simultaneously trigger tumor antigen release, thereby reversing immunosuppression and achieving potent antitumor immunity and augmented cancer therapy, are explored. By optimizing both the composition and morphology, a facile strategy is proposed to construct yolk-shell nanohybrids (Fe₃ O₄ @C/MnO₂ -PGEA, FCMP). The intrinsic immunomodulatory effects of FCMP are utilized to reprogram macrophages to M1 phenotype and induce the maturation of dendritic cells. In addition, the chemical, magnetic, and optical properties of FCMP contribute to amplified immunogenic cell death induced by multiaugmented chemodynamic therapy (CDT) and synergistic tumor treatment. Taking advantage of the unique yolk-shell structure, accurate T₁ -T₂ dual-mode magnetic resonance imaging can be realized and CDT can be maximized through sufficient exposure of both the Fe₃ O₄ core and MnO₂ shell. Potent antitumor effects are found to substantially inhibit the growth of both primary and distant tumors. Furthermore, the strategy can be extended to the synthesis of other yolk-shell nanohybrids with tailored properties. This work establishes a novel strategy for the fabrication of multifunctional nanoplatforms with yolk-shell structure for effective cancer therapy with immunomodulation-enhanced antitumor immunity.

Understanding Nanomaterial-Liver Interactions to Facilitate the Development of Safer Nanoapplications

Nanomaterials (NMs) are widely used in commercial and medical products, such as cosmetics, vaccines, and drug carriers. Exposure to NMs via various routes such as dermal, inhalation, and ingestion has been shown to gain access to the systemic circulation, resulting in the accumulation of NMs in the liver. The unique organ structures and blood flow features facilitate the liver sequestration of NMs, which may cause adverse effects in the liver. Currently, most in vivo studies are focused on NMs accumulation at the organ level and evaluation of the gross changes in liver structure and functions, however, cell-type-specific uptake and responses, as well as the molecular mechanisms at cellular levels leading to effects at organ levels are lagging. Herein, the authors systematically review diverse interactions of NMs with the liver, specifically on major liver cell types including Kupffer cells (KCs), liver sinusoidal endothelial cells (LSECs), hepatic stellate cells (HSCs), and hepatocytes as well as the detailed molecular mechanisms involved. In addition, the knowledge gained on nano-liver interactions that can facilitate the development of safer nanoproducts and nanomedicine is also reviewed.

Dual-Targeted Fe₃O₄@MnO₂ Nanoflowers for Magnetic Resonance Imaging-Guided Photothermal-Enhanced Chemodynamic/Chemotherapy for Tumor

The construction of high-efficiency tumor theranostic platform will be of great interest in the treatment of cancer patients; however, significant challenges are associated with developing such a platform. In this study, we developed high-efficiency nanotheranostic agent based on ferroferric oxide, manganese dioxide, hyaluronic acid and doxorubicin (FMDH-D NPs) for dual targeting and imaging guided synergetic photothermal-enhanced chemodynamic/chemotherapy for cancer, which improved the specific uptake of drugs at tumor site by the dual action of CD44 ligand hyaluronic acid and magnetic nanoparticles guided by magnetic force. Under the acidic microenvironment of cancer cells, FMDH-D could be decomposed into Mn²⁺ and Fe²⁺ to generate •OH radicals by triggering a Fenton-like reaction and responsively releasing doxorubicin to kill cancer cells. Meanwhile, alleviating tumor hypoxia improved the efficacy of chemotherapy in tumors. The photothermal properties of FMDH generated high temperatures, which further accelerated the generation of reactive oxygen species, and enhanced effects of chemodynamic therapy. Furthermore, FMDH-D NPs proved to be excellent T₁/T₂-weighted magnetic resonance imaging contrast agents for monitoring the tumor location. These results confirmed the considerable potential of FMDH-D NPs in a highly efficient synergistic therapy platform for cancer treatment.

Enzyme-Mediated Intracellular Polymerization of AIEgens for Light-Up Tumor Localization and Theranostics

Improving the enrichment of drugs or theranostic agents within tumors is vital to achieve effective cancer diagnosis and therapy with reduced dosage and damage to normal tissues. In this work, an enzyme-mediated aggregation-induced emission fluorogen (AIEgen) intracellular polymerization strategy that can simultaneously promote the accumulation and retention of the AIEgen in the tumor for prolonged imaging and enhanced tumor growth inhibition is described. An AIEgen-peptide conjugate (D2P1) and cyanobenzothiazole-cysteine (3CBT) that can undergo rapid condensation reaction to form nanoaggregates in tumor cells are rationally designed. Upon tumor-specific cathepsin protease reaction, the cleavage of peptides induces condensate polymerization between the exposed cysteine and 2-cyanobenzothiazole on 3CBT, triggering accumulation of D2P1 into the tumor site, leading to fluorescence light-up. Such enzyme-mediated polymerization of D2P1 and 3CBT alters cellular motility via disrupting actin organization and in turn inhibiting cell proliferation. In addition, due to the built-in intrinsic photosensitization property of the AIEgen, the accumulation of D2P1 can remarkably promote the tumor photodynamic therapy effect in vivo under light irradiation. This study thus represents the enzyme-mediated intracellular polymerization system with high potential to improve the diagnostic and therapeutic outcomes of tumors in vivo.

NIR-II Functional Materials for Photoacoustic Theranostics

Photoacoustic imaging (PAI) has attracted great attention in the diagnosis and treatment of diseases due to its noninvasive properties. Especially in the second near-infrared (NIR-II) window, PAI can effectively avoid the interference of tissue spontaneous fluorescence and light scattering, and obtain high resolution images with deeper penetration depth. Because of its ideal spectral absorption and high conversion efficiency, NIR-II PA contrast agents overcome the absorption or emission of NIR-II light by endogenous biomolecules. In recent years, a series of NIR-II PA contrast agents have been developed to improve the performance of PAI in disease diagnosis and treatment. In this paper, the research progress of NIR-II PA contrast agents and their applications in biomedicine are reviewed. PA contrast agents are classified according to their composition, including inorganic contrast agents, organic contrast agents, and hybrid organic-inorganic contrast agents. The applications of NIR-II PA contrast agents in medical imaging are described, such as cancer imaging, inflammation detection, brain disease imaging, blood related disease imaging, and other biomedical application. Finally, the research prospects and breakthrough of NIR-II PA contrast agents are discussed.

One-Pot Bifunctionalization of Silica Nanoparticles Conjugated with Bioorthogonal Linkers: Application in Dual-modal Imaging

Covalent surface modification of silica nanoparticles (SNPs) offers great potential for the development of multimodal nanomaterials for biomedical applications. Herein, we report the synthesis of covalently conjugated bifunctional SNPs and...

Organic–inorganic hybrid nanomaterials prepared via polymerization-induced self-assembly: recent developments and future opportunities

This review highlights recent developments in the preparation of organic–inorganic hybrid nanomaterials via polymerization-induced self-assembly.

Dual Sensitization via Electron and Energy Harvesting in a Nanohybrid for Improvement of Therapeutic Efficacy

We demonstrate experimental evidence of the effect of surface plasmon resonance of noble metal nanoparticles (NPs) on the activity of a well-known biomedicinal drug in the proximity of a semiconductor having a wide band gap for enhanced photodynamic therapy (PDT) efficacy. We have chosen riboflavin (Rf) (or vitamin B₂) as a model photosensitizer, attached with ZnO NPs and further attached with gold (Au) NP-decorated ZnO to increase the efficiency. The synthesized nanohybrids are characterized with the help of different microscopic, optical spectroscopic, and density functional theory (DFT)-based techniques. The DFT and time-dependent DFT-based calculations validate the experimental findings. A detailed ultrafast spectroscopic study has been carried out further to study the excited-state charge dynamics in the interface of the nanohybrids. The occurrence of a Förster resonance energy transfer (FRET) between Rf and Au has been found to be the key reason for the increased efficiency in the Rf-ZnO-Au nanohybrid over the Rf-ZnO one. The dipolar coupling between Au and Rf in the Rf-ZnO-Au nanohybrid further facilitates the generation of reactive oxygen species (ROS) in comparison to Rf-ZnO under blue-light irradiation. The greater efficiency in ROS generation by the Rf-ZnO-Au nanohybrid has been utilized for antimicrobial action against methicillin-resistant S. aureus (MRSA). Overall, the present study highlights the dual sensitization for achieving enhanced electron injection efficiency in the Rf-ZnO-Au nanohybrid in order to use it as an antibacterial agent that could be translated in PDT.

Modification of Amorphous Mesoporous Zirconia Nanoparticles with Bisphosphonic Acids: A Straightforward Approach for Tailoring the Surface Properties of the Nanoparticles

The use of readily prepared bisphosphonic acids obtained in few steps through a thio-Michael addition of commercially available thiols on tetraethyl vinylidenebisphosphonate enables the straightforward surface modification of amorphous mesoporous zirconia nanoparticles. Simple stirring of the zirconia nanoparticles in a buffered aqueous solution of the proper bisphosphonic acid leads to the surface functionalization of the nanoparticles with different kinds of functional groups, charge and hydrophobic properties. Formation of both chemisorbed and physisorbed layers of the bisphosphonic acid take place, observing after extensive washing a grafting density of 1.1 molecules/nm2 with negligible release in neutral or acidic pH conditions, demonstrating stronger loading compared to monophosphonate derivatives. The modified nanoparticles were characterized by IR, XPS, ζ-potential analysis to investigate the loading of the bisphosphonic acid, FE-SEM to investigate the size and morphologies of the nanoparticles and 31 P and 1 H MAS NMR to investigate the coordination motif of the phosphonate units on the surface. All these analytical techniques demonstrated the strong affinity of the bisphosphonic moiety for the Zr(IV) metal centers. The functionalization with bisphosphonic acids represents a straightforward covalent approach for tailoring the superficial properties of zirconia nanoparticles, much straightforward compared the classic use of trisalkoxysilane or trichlorosilane reagents typically employed for the functionalization of silica and metal oxide nanoparticles. Extension of the use of bisphosphonates to other metal oxide nanoparticles is advisable.

Pressure-Controlled Encapsulation of Graphene Quantum Dots into Liposomes by the Reverse-Phase Evaporation Method

Ultrasmall nanoparticles (USNPs) with sizes below 10 nm have shown great potentials in medical applications owing to their outstanding physical, chemical, optical, and biological properties. However, they suffer from a rapid renal clearance and biodegradation rate in the biological environment due to the small size. Liposomes are one of the most promising delivery nanocarriers for loading USNPs because of their excellent biocompatibility and lipid bilayer structure. Encapsulation of USNPs into liposomes in an efficient and controllable manner remains a challenge. In this study, we achieved a high loading of graphene quantum dots (GQDs, ∼4 nm), a typical USNP, into the aqueous core of liposomes (45.68 ± 1.44%), which was controllable by the pressure. The GQDs-loaded liposomes (GQDs-LPs) exhibited a very good aqueous stability for over a month. Furthermore, indocyanine green (ICG), an efficient near-infrared (NIR) photothermal agent, was introduced in the GQDs-LP system that could convert NIR laser energy into thermal energy and break down the liposomes, causing the release of GQDs in 6 min. Moreover, this NIR light-controlled release system (GQDs-ICG-LPs) also exhibited a good photothermal therapeutic performance in vitro, and 75% of cancer cells were killed at a concentration of 200 μg/mL. Overall, the successful development of the NIR light-controlled release system has laid a solid foundation for the future biomedical application of USNPs-loaded liposomes.

Recent Breakthroughs and Advancements in NOx and SOx Reduction Using Nanomaterials-Based Technologies: A State-of-the-Art Review

Nitrogen and sulpher oxides (NO_x, SO_x) have become a global issue in recent years due to the fastest industrialization and urbanization. Numerous techniques are used to treat the harmful exhaust emissions, including dry, traditional wet and hybrid wet-scrubbing techniques. However, several difficulties, including high-energy requirement, limited scrubbing-liquid regeneration, formation of secondary pollutants and low efficiency, limit their industrial utilization. Regardless, the hybrid wet-scrubbing technology is gaining popularity due to low-costs, less-energy consumption and high-efficiency removal of air pollutants. The removal/reduction of NO_x and SO_x from the atmosphere has been the subject of several reviews in recent years. The goal of this review article is to help scientists grasp the fundamental ideas and requirements before using it commercially. This review paper emphasizes the use of green and electron-rich donors, new breakthroughs, reducing GHG emissions, and improved NO_x and SO_x removal catalytic systems, including selective/non-catalytic reduction (SCR/SNCR) and other techniques (functionalization by magnetic nanoparticles; NP, etc.,). It also explains that various wet-scrubbing techniques, synthesis of solid iron-oxide such as magnetic (Fe₃O₄) NP are receiving more interest from researchers due to the wide range of its application in numerous fields. In addition, EDTA coating on Fe₃O₄ NP is widely used due to its high stability over a wide pH range and solid catalytic systems. As a result, the Fe₃O₄@EDTA-Fe catalyst is projected to be an optimal catalyst in terms of stability, synergistic efficiency, and reusability. Finally, this review paper discusses the current of a heterogeneous catalytic system for environmental remedies and sustainable approaches.

Organic/Inorganic Self-Assembled Hybrid Nano-Architectures for Cancer Therapy Applications

Since the conceptualization of nanomedicine, numerous nanostructure-mediated drug formulations have progressed into clinical trials for treating cancer. However, recent clinical trial results indicate such kind of drug formulations has a limited improvement on the antitumor efficacy. This is due to the biological barriers associated with those formulations, for example, circulation stability, extravasation efficiency in tumor, tumor penetration ability, and developed multi-drug resistance. When employing for nanomedicine formulations, pristine organic-based and inorganic-based nanostructures have their own limitations. Accordingly, organic/inorganic (O/I) hybrids have been developed to integrate the merits of both, and to minimize their intrinsic drawbacks. In this context, the recent development in O/I hybrids resulting from a self-assembly strategy will be introduced. Through such a strategy, organic and inorganic building blocks can be self-assembled via either chemical covalent bonds or physical interactions. Based on the self-assemble procedure, the hybridization of four organic building blocks including liposomes, micelles, dendrimers, and polymeric nanocapsules with five functional inorganic nanoparticles comprising gold nanostructures, magnetic nanoparticles, carbon-based materials, quantum dots, and silica nanoparticles will be highlighted. The recent progress of these O/I hybrids in advanced modalities for combating cancer, such as, therapeutic agent delivery, photothermal therapy, photodynamic therapy, and immunotherapy will be systematically reviewed.

Organic/Inorganic Hybrid Fibers: Controllable Architectures for Electrochemical Energy Applications

Organic/inorganic hybrid fibers (OIHFs) are intriguing materials, possessing an intrinsic high specific surface area and flexibility coupled to unique anisotropic properties, diverse chemical compositions, and controllable hybrid architectures. During the last decade, advanced OIHFs with exceptional properties for electrochemical energy applications, including possessing interconnected networks, abundant active sites, and short ion diffusion length have emerged. Here, a comprehensive overview of the controllable architectures and electrochemical energy applications of OIHFs is presented. After a brief introduction, the controllable construction of OIHFs is described in detail through precise tailoring of the overall, interior, and interface structures. Additionally, several important electrochemical energy applications including rechargeable batteries (lithium-ion batteries, sodium-ion batteries, and lithium-sulfur batteries), supercapacitors (sandwich-shaped supercapacitors and fiber-shaped supercapacitors), and electrocatalysts (oxygen reduction reaction, oxygen evolution reaction, and hydrogen evolution reaction) are presented. The current state of the field and challenges are discussed, and a vision of the future directions to exploit OIHFs for electrochemical energy devices is provided.

Optimization of Nanoparticles for Smart Drug Delivery: A Review

Nanoparticle delivery systems have good application prospects in the treatment of various diseases, especially in cancer treatment. The effect of drug delivery is regulated by the properties of nanoparticles. There have been many studies focusing on optimizing the structure of nanoparticles in recent years, and a series of achievements have been made. This review summarizes the optimization strategies of nanoparticles from three aspects-improving biocompatibility, increasing the targeting efficiency of nanoparticles, and improving the drug loading rate of nanoparticles-aiming to provide some theoretical reference for the subsequent drug delivery of nanoparticles.

Tunable multi-responsive nano-gated mesoporous silica nanoparticles as drug carriers

Tunable multi-responsive mesoporous silica nanoparticles were prepared by post-condensation/surface modification of MCM-41 nanoparticles. Surface grafting of a poly(N,N-dimethylaminoethyl methacrylate)-based polymer containing disulfide bonds was achieved by a click reaction. Chemical modification, morphological characteristics, and textural properties of the nanoparticles were studied using multiple characterization techniques such as Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, small-angle X-ray scattering, and nitrogen adsorption/desorption behavior. The nanoparticles retained the meso-structural integrity of MCM41 and particle size < 100 nm after grafting with the polymer. The pH and redox-responsive behavior of the nanoparticles were also studied. The nanoparticles possess excellent drug-loading capacity owing to their large surface area and 'closed gate' mechanism of the grafted polymer chains. The release profile of doxorubicin at two different pH (7.4 and 5.5) and in the presence of dithiothreitol showed a dual response behavior. The nano drug carrier device exhibited efficient intracellular uptake in cancer cells with suitable cytotoxicity and pharmacokinetic behavior, and may therefore be considered a good candidate for cancer therapy.

Understanding intricacies of bioinspired organic-inorganic hybrid nanoflowers: A quest to achieve enhanced biomolecules immobilization for biocatalytic, biosensing and bioremediation applications

The immobilization of biomolecules has been a subject of interest for scientists for a long time. The organic-inorganic hybrid nanoflowers are a new class of nanostructures that act as a host platform for the immobilization of such biomolecules. It provides better practical applicability to these functional biomolecules while also providing superior activity and reusability when catalysis is involved. These nanostructures have a versatile and straightforward synthesis process and also exhibit enzyme mimicking activity in many cases. However, this facile synthesis involves many intricacies that require in-depth analysis to fully attain its potential as an immobilization technique. A complete account of all the factors involving the synthesis process optimisation is essential to be studied to make it commercially viable. This paper explores all the different aspects of hybrid nanoflowers which sets them apart from the conventional immobilization techniques while also giving an overview of its wide range of applications in industries.

Fabrication and applications of bioactive chitosan-based organic-inorganic hybrid materials: A review

Organic-inorganic hybrid materials like bone, shells, and teeth can be found in nature, which are usually composed of biomacromolecules and nanoscale inorganic ingredients. Synergy of organic-inorganic components in hybrid materials render them outstanding and versatile performance. Chitosan is commonly used organic materials in bionic hybrid materials since its bioactive properties and could be controllable tailored by various means to meet complex conditions in different applications. Among these fabrication means, hybridization was favored for its convenience and efficiency. This review discusses three kinds of chitosan-based hybrid materials: hybridized with hydroxyapatite, calcium carbonate, and clay respectively, which are the representative of phosphate, carbonate, and hydrous aluminosilicates. Here, we reported the latest developments of the preparation methods, composition, structure and applications of these bioactive hybrid materials, especially in the biomedical field. Despite the great progress was made in bioactive organic-inorganic hybrid materials based on chitosan, some challenges and specific directions are still proposed for future development in this review.

High Stability Au NPs: From Design to Application in Nanomedicine

In recent years, Au-based nanomaterials are widely used in nanomedicine and biosensors due to their excellent physical and chemical properties. However, these applications require Au NPs to have excellent stability in different environments, such as extreme pH, high temperature, high concentration ions, and various biomatrix. To meet the requirement of multiple applications, many synthetic substances and natural products are used to prepare highly stable Au NPs. Because of this, we aim at offering an update comprehensive summary of preparation high stability Au NPs. In addition, we discuss its application in nanomedicine. The contents of this review are based on a balanced combination of our studies and selected research studies done by worldwide academic groups. First, we address some critical methods for preparing highly stable Au NPs using polymers, including heterocyclic substances, polyethylene glycols, amines, and thiol, then pay attention to natural product progress Au NPs. Then, we sum up the stability of various Au NPs in different stored times, ions solution, pH, temperature, and biomatrix. Finally, the application of Au NPs in nanomedicine, such as drug delivery, bioimaging, photothermal therapy (PTT), clinical diagnosis, nanozyme, and radiotherapy (RT), was addressed concentratedly.

Engineering Near-Infrared-Excitable Metal-Organic Framework for Tumor Microenvironment Responsive Therapy

Luminescent metal-organic frameworks (MOFs), which incorporate some guest luminescent molecules/ions into MOFs, have attracted extensive attention because of their exceptional optical properties. However, traditional luminescent MOFs are mainly responsive to ultraviolet (UV) or visible light, which has limited their bioapplications due to the restrained tissue penetration depths. In this study, we have constructed a diagnostic nanoplatform UCNP@MOF consisting of upconverting metal-organic frameworks, which combine the photo-upconverting characteristics of the upconversion nanoparticles (UCNPs) with the unique physicochemical properties of Al-MOFs. Specifically, the core-shell structured UCNP@MOF nanocomposites were prepared by poly(vinylpyrrolidone) (PVP)-regulated nucleation of Al-MOF layer on the UCNP surface. When excited by a 980 nm laser light, the green signal released from UCNPs can trigger the photosensitive Al-MOFs to produce a large amount of singlet oxygen (¹O₂) for photodynamic therapy (PDT). Meanwhile, the anticancer drug, doxorubicin hydrochloride (DOX), was further incorporated into the porous structures of Al-MOFs and demonstrated the pH-responsive drug release behavior. Our results show that the near-infrared (NIR) light-induced PDT with chemotherapy (CMT) exhibits excellent antitumor effects. It is believed that the present work highlights the potential of the combination of UCNPs and MOFs and holds great promise for biomedical applications.

Ultrahigh Adsorption Capacity and Kinetics of Vertically Oriented Mesoporous Coatings for Removal of Organic Pollutants

Highly efficient removal of organic pollutants currently is a main worldwide concern in water treatment, and highly challenging. Here, vertically oriented mesoporous coatings (MCs) with tunable surface properties and pore sizes have been developed via the single-micelle directing assembly strategy, which show good adsorption performances toward a wide range of organic pollutants. The micelle size and structure can be precisely regulated by oil molecules based on their n-octanol/water partition coefficients (Log P) in the oil-water diphase assembly system, which are critical to the pore size and pore surface property of the MCs. The affinity and steric effects of the MCs can be on-demand adjusted, as a result, the MCs show a ultrahigh adsorption capacity (263 mg g^-1 ), surface occupancy ratio (≈41.92%), and adsorption rate (≈10.85 mg g^-1  min^-1 ) for microcystin-LR, which is among the best performances up to date. The MCs also show an excellent universality to remove organic pollutants with different properties. Moreover, overcoming the challenges proposed by particulate absorbents, the MCs are stable and can be easily regenerated and reused without secondary contamination. This work paves a new route to the synthesis of high-quality MCs for water purification.

2D Porphyrinic Metal-Organic Framework Nanosheets as Multidimensional Photocatalysts for Functional Materials

Ultrathin porphyrinic 2D MOFs, ZnTCPP nanosheets (TCPP: 5,10,15,20-(tetra-4-carboxyphenyl) porphyrin) were employed as heterogeneous photocatalysts to activate PET-RAFT polymerization under various wavelengths ranging from violet to orange light. High polymerization rates, oxygen tolerance, and precise temporal control were achieved. The polymers showed narrow molecular weight distributions and good chain-end fidelity. The 2D ZnTCPP nanosheets were applied as photocatalysts in stereolithographic 3D printing in an open-air environment under blue light to yield well-defined 3D printed objects. Apart from providing an efficient catalytic system, 2D ZnTCPP nanosheets reinforced the mechanical properties of the 3D printed materials. The presence of ZnTCPP embedded in the materials conferred effective antimicrobial activity under visible light by production of singlet oxygen, affording 98 % and 93 % anti-bacterial efficiency against Gram-positive and Gram-negative bacteria, respectively.

Plasmonic Bi-enhanced ammoniated α-MnS/Bi2MoO6 S-scheme heterostructure for visible-light-driven CO2 reduction

Low redox ability and severe photocorrosion limit the photocatalytic activity of metal sulfides. Herein, step-scheme (S-scheme) heterojunction composited by diethylenetriamine (DETA) ammoniated MnS (α-MnS) and Bi₂MoO₆ with Bi surface plasmon resonance (SPR) was successfully fabricated (Bi-5 %M/BMO). This special electron transport structure effectively suppresses the photocorrosion of α-MnS and makes photocatalysts with high redox ability. DETA was protonated to form positively charged ammonium ions and they are easy to combine with acid gas CO₂, reducing the activation energy of CO₂, building an efficient catalytic reaction system, and improving CO₂ reduction efficiency. The CO evolution rate of Bi-5 %M/BMO (61.11 μmol g^-1h^-1) is 2.42, 7.89 and 5.01 times greater than that of 5 %M/BMO, pure α-MnS hollow spheres and Bi₂MoO₆, respectively. This indicates that Bi SPR effect can promote the separation of photon-generated electron-hole pairs dramatically. The ammoniated S-scheme heterostructure decorated with the SPR effect may provide a new perspective to design heterojunction.