Hydration Layer-Mediated Pairwise Interaction of Nanoparticles

Influence of Salt on Supramolecular Oscillatory Structural Forces and Stratification in Micellar Freestanding Films

Freestanding films of soft matter containing micelles, nanoparticles, polyelectrolyte-surfactant complexes, bilayers, and smectic liquid crystals exhibit stratification. Stepwise thinning and coexisting thick-thin regions associated with drainage via stratification are attributed to the confinement-induced structuring and layering of supramolecular structures, which contribute supramolecular oscillatory structural forces. In freestanding micellar films, formed by a solution of an ionic surfactant above its critical micelle concentration, both interfacial adsorption and the micelle size and shape are determined by the concentration of surfactant and of added electrolytes. Although the influence of surfactant concentration on stratification has been investigated before, the influence of added salt, at concentrations typically found in water used on a daily basis, has not been investigated yet. In this contribution, we elucidate how the addition of salt affects stepwise thinning: step size, number of steps, as well as the shape and size of nanoscopic nonflat structures such as mesas in micellar foam films formed with aqueous solutions of anionic surfactant (sodium dodecyl sulfate (SDS)). The nanoscopic thickness variations and transitions are visualized and analyzed using IDIOM (Interferometry Digital Imaging Optical Microscopy) protocols with exquisite spatiotemporal resolution (thickness ∼1 nm, time <1 ms). In contrast to nanoparticle dispersions that show no influence of salt on step size, we find that the addition of salt to micellar freestanding films results in a decrease in step size as well as the number of stepwise transitions, in addition to changes in nucleation and growth of mesas, all driven by the corresponding change in supramolecular oscillatory structural forces.

In-situ liquid cell transmission electron microscopy investigation on oriented attachment of gold nanoparticles

Inside a liquid solution, oriented attachment (OA) is now recognized to be as important a pathway to crystal growth as other, more conventional growth mechanisms. However, the driving force that controls the occurrence of OA is still poorly understood. Here, using in-situ liquid cell transmission electron microscopy, we demonstrate the ligand-controlled OA of citrate-stabilized gold nanoparticles at atomic resolution. Our data reveal that particle pairs rotate randomly at a separation distance greater than twice the layer thickness of adsorbed ligands. In contrast, when the particles get closer, their ligands overlap and guide the rotation into a directional mode until they share a common {111} orientation, when a sudden contact occurs accompanied by the simultaneous expulsion of the ligands on this surface. First-principle calculations confirm that the lower ligand binding energy on {111} surfaces is the intrinsic reason for the preferential attachment at this facet, rather than on other low-index facets.

The non-classical oriented attachment crystallization pathway explains the growth of many nanocrystals. Here, the authors study citrate-stabilized gold nanoparticles by in-situ liquid transmission electron microscopy to reveal that surface ligands are a critical driving force in the oriented attachment process.

Liquid-Phase Transmission Electron Microscopy for Studying Colloidal Inorganic Nanoparticles

For the past few decades, nanoparticles of various sizes, shapes, and compositions have been synthesized and utilized in many different applications. However, due to a lack of analytical tools that can characterize structural changes at the nanoscale level, many of their growth and transformation processes are not yet well understood. The recently developed technique of liquid-phase transmission electron microscopy (TEM) has gained much attention as a new tool to directly observe chemical reactions that occur in solution. Due to its high spatial and temporal resolution, this technique is widely employed to reveal fundamental mechanisms of nanoparticle growth and transformation. Here, the technical developments for liquid-phase TEM together with their application to the study of solution-phase nanoparticle chemistry are summarized. Two types of liquid cells that can be used in the high-vacuum conditions required by TEM are discussed, followed by recent in situ TEM studies of chemical reactions of colloidal nanoparticles. New findings on the growth mechanism, transformation, and motion of nanoparticles are subsequently discussed in detail.

Incorporation of ion and solvent structure into mean-field modeling of the electric double layer

An electric double layer forms when the small mobile ions of an electrolyte interact with an extended charged object, a macroion. The competition between electrostatic attraction and translational entropy loss of the small ions results in a diffuse layer of partially immobilized ions in the vicinity of the macroion. Modeling structure and energy of the electric double layer has a long history that has lead to the classical Poisson-Boltzmann theory and numerous extensions that account for ion-ion correlations and structural ion and solvent properties. The present review focuses on approaches that instead of going beyond the mean-field character of Poisson-Boltzmann theory introduce structural details of the ions and the solvent into the Poisson-Boltzmann modeling framework. The former include not only excluded volume effects but also the presence of charge distributions on individual ions, spatially extended ions, and internal ionic degrees of freedom. The latter treat the solvent either explicitly as interacting Langevin dipoles or in the form of effective non-electrostatic interactions, in particular Yukawa interactions, that are added to the Coulomb potential. We discuss how various theoretical models predict structural properties of the electric double layer such as the differential capacitance and compare some of these predictions with computer simulations.

Imaging the polymerization of multivalent nanoparticles in solution

Numerous mechanisms have been studied for chemical reactions to provide quantitative predictions on how atoms spatially arrange into molecules. In nanoscale colloidal systems, however, less is known about the physical rules governing their spatial organization, i.e., self-assembly, into functional materials. Here, we monitor real-time self-assembly dynamics at the single nanoparticle level, which reveal marked similarities to foundational principles of polymerization. Specifically, using the prototypical system of gold triangular nanoprisms, we show that colloidal self-assembly is analogous to polymerization in three aspects: ensemble growth statistics following models for step-growth polymerization, with nanoparticles as linkable “monomers”; bond angles determined by directional internanoparticle interactions; and product topology determined by the valency of monomeric units. Liquid-phase transmission electron microscopy imaging and theoretical modeling elucidate the nanometer-scale mechanisms for these polymer-like phenomena in nanoparticle systems. The results establish a quantitative conceptual framework for self-assembly dynamics that can aid in designing future nanoparticle-based materials.

Few models exist that describe the spontaneous organization of colloids into materials. Here, the authors combine liquid-phase TEM and single particle tracking to observe the dynamics of gold nanoprisms, finding that nanoscale self-assembly can be understood within the framework of atomic polymerization.

Dynamics of Templated Assembly of Nanoparticle Filaments within Nanochannels

Nanoparticles (NPs) can self-assemble into complex, organized superstructures on patterned surfaces through fluid-mediated interactions. However, the detailed mechanisms for such NP assemblies are largely unknown. Here, using in situ transmission electron microscopy, the stepwise self-assembly dynamics of hydrophobic gold NPs into long filaments formed on the surfaces of water-filled patterned nanochannel templates is observed. First, the formation of a meniscus between the nanochannel walls, during the slow drying of water, causes accumulation of the NPs in the middle of the nanochannels. Second, owing to the strong van der Waals attraction between the NP ligands, the NPs condense into filaments along the centers of the nanochannels. Filaments with highly fluctuating longitudinal NP densities are also observed to fragment into separated structures. Understanding the intermediate stages of fluid-mediated NP self-assembly on patterned surfaces will have important implications for the controlled formation of templated NP assemblies with numerous applications.

Direct Observation of Interactions between Nanoparticles and Nanoparticle Self-Assembly in Solution

Hierarchically organized nanoparticles (NPs) possess unique properties and are relevant to various technological applications. An important "bottom-up" strategy for building such hierarchical nanostructures is to guide the individual NPs into ordered nanoarchitectures using intermolecular interactions and external forces. However, our current understanding of the nanoscale interactions that govern such self-assembly processes usually relies on post-synthesis/assembly or indirect characterization. Theoretical models that can derive these interactions are presently constrained to systems with only a few particles or on short time scales. Hence, except for a number of special cases, a description that captures the detailed mechanisms of NP self-assembly still eludes us. By imaging the assembly of NPs in solution with subnanometer resolution and in real-time, in situ liquid cell transmission electron microscopy (LC-TEM) can identify previously unknown intermediate stages and improve our understanding of such processes. Here, we review recent studies where we explored NP self-assembly at different organization length scales using LC-TEM: (1) we followed the transformation of atoms into crystalline NPs in solution, (2) we highlighted the role of solvation forces on interaction dynamics between NPs, and (3) we described the assembly dynamics of NPs in solution. In the case of nanocrystal nucleation, we identified the existence of three distinct steps that lead to the formation of crystalline nuclei in solution. These steps are spinodal decomposition of the precursor solution into solute-rich and solute-poor liquid phases, nucleation of amorphous clusters within the solute-rich liquid phase, followed by crystallization of these amorphous clusters into crystalline NPs. The next question we ask is how NPs interact in solution once they form. It turns out that the hydration layer surrounding each NP acts as a repulsive barrier that prevents NPs from readily attaching to each other due to attractive vdW forces. Consequently, two interacting NPs form a metastable pair separated by their one water molecule thick hydration shell and they undergo attachment only when this water between them is drained. Next, we explore the self-assembly of many NP systems where the formation of linear chains from spherical NPs or nanorods (NRs) is mediated by linker molecules. At low linker concentration, both spherical NPs and NRs tend to form linear chains because of the need to reduce electrostatic repulsion between NP building blocks. When the concentration of linkers is increased, the attachment of NPs is no longer linear. For example, we find that two NRs undergo side-to-side assembly due to decreased electrostatic repulsion and the anisotropic distribution of linkers on NR surfaces at high linker concentration. Lastly, we look at the formation of NP nanorings directed by ethylenediaminetetraacetic acid (EDTA) nanodroplets in water. Our study shows that nanoring assemblies form via sequential attachment of NPs to binding sites located along the circumference of the EDTA nanodroplet, followed by rearrangement and reorientation of the attached NPs. Our approach based on real-time visualization of nanoscale processes not only reveals all the intermediate steps of NP assembly, but also provides quantitative description on the interactions between nanoscale objects in solution.

Interactions and Attachment Pathways between Functionalized Gold Nanorods

Nanoparticle (NP) self-assembly has been recognized as an important technological process for forming ordered nanostructures. However, the detailed dynamics of the assembly processes remain poorly understood. Using in situ liquid cell transmission electron microscopy, we describe the assembly modes of gold (Au) nanorods (NRs) in solution mediated by hydrogen bonding between NR-bound cysteamine linker molecules. Our observations reveal that by tuning the linker concentration, two different NR assembly modes can be achieved. These assembly modes proceed via the (1) end-to-end and (2) side-to-side attachment of NRs at low and high linker concentrations in solution, respectively. In addition, our time-resolved observations reveal that the side-to-side NR assemblies can occur through two different pathways: (i) prealigned attachment, where two Au NRs prealign to be parallel prior to assembly, and (ii) postattachment alignment, where two Au NRs first undergo end-to-end attachment and pivot around the attachment point to form the side-to-side assembly. We attributed the observed assembly modes to the distribution of linkers on the NR surfaces and the electrostatic interactions between the NRs. The intermediate steps in the assembly reported here reveal how the shape and surface functionalities of NPs drive their self-assembly, which is important for the rational design of hierarchical nanostructures.

Optimization and evaluation of Oridonin-loaded Soluplus®-Pluronic P105 mixed micelles for oral administration

In this study, a new type of mixed micelles was developed using Soluplus^® (SOL) and Pluronic^® P105 (P105) for the encapsulation of Oridonin (ORN). Oridonin-loaded micelles (ORN-M) were simply prepared using solvent evaporation and characterized for particle size, particle morphology, encapsulation efficiency, and drug loading. In addition, the in vitro drug release behavior of ORN-M was assessed using the widely applied dialysis bag technique. The pharmacokinetic property of ORN was explored in rats after oral administration of ORN-M. Optimized ORN-M were of a small size (137.2±1.65nm) and spherical shape when the ratio of SOL:P105 was 3:1, with entrapment efficiency 90.48±1.85% and drug loading 15.08±0.38%. Oral absorption capacity of ORN was greatly enhanced with a relative bioavailability of 210.55% in comparison to that of in-house suspensions, which suggests that ORN-M shows significantly improved bioavailability and drug absorption characteristics. Overall, the optimized SOL-P105 dual mixed micelles show great potential for use as oral drug carriers for cancer treatment.

Self-Assembly of Colloidal Nanocrystals: From Intricate Structures to Functional Materials

Chemical methods developed over the past two decades enable preparation of colloidal nanocrystals with uniform size and shape. These Brownian objects readily order into superlattices. Recently, the range of accessible inorganic cores and tunable surface chemistries dramatically increased, expanding the set of nanocrystal arrangements experimentally attainable. In this review, we discuss efforts to create next-generation materials via bottom-up organization of nanocrystals with preprogrammed functionality and self-assembly instructions. This process is often driven by both interparticle interactions and the influence of the assembly environment. The introduction provides the reader with a practical overview of nanocrystal synthesis, self-assembly, and superlattice characterization. We then summarize the theory of nanocrystal interactions and examine fundamental principles governing nanocrystal self-assembly from hard and soft particle perspectives borrowed from the comparatively established fields of micrometer colloids and block copolymer assembly. We outline the extensive catalog of superlattices prepared to date using hydrocarbon-capped nanocrystals with spherical, polyhedral, rod, plate, and branched inorganic core shapes, as well as those obtained by mixing combinations thereof. We also provide an overview of structural defects in nanocrystal superlattices. We then explore the unique possibilities offered by leveraging nontraditional surface chemistries and assembly environments to control superlattice structure and produce nonbulk assemblies. We end with a discussion of the unique optical, magnetic, electronic, and catalytic properties of ordered nanocrystal superlattices, and the coming advances required to make use of this new class of solids.

Self-Setting Calcium Phosphate Cements with Tunable Antibiotic Release Rates for Advanced Antimicrobial Applications

Osteomyelitis, an infectious disease predominantly tied to poor sanitary conditions in underdeveloped regions of the world, is in need of inexpensive, easily in situ synthesizable and administrable materials for its treatment. The results of this study stem from the attempt to create one such affordable and minimally invasive therapeutic platform in the form of a self-setting, injectable cement with a tunable drug release profile, composed of only nanoparticulate hydroxyapatite, the synthetic version of the bone mineral. Cements comprised two separately synthesized hydroxyapatite powders, one of which, HAP2, was precipitated abruptly, retaining the amorphous nature longer, and the other one of which, HAP1, was precipitated at a slower rate, more rapidly transitioning to the crystalline structure. Cements were made with four different weight ratios of the two hydroxyapatite components: 100/0, 85/15, 50/50, and 0/100 with respect to HAP1 and HAP2. Both the setting and the release rates measured on two different antibiotics, vancomycin and ciprofloxacin, were controlled using the weight ratio of the two hydroxyapatite components. Various inorganic powder properties were formerly used to control drug release, but here we demonstrate for the first time that the kinetics of the mechanism of formation of a solid compound can be controlled to produce tunable drug release profiles. Specifically, it was found that the longer the precursor calcium phosphate component of the cement retains the amorphous nature of the primary precipitate, the more active it was in terms of speeding up the diffusional release of the adsorbed drug. The setting rate was, in contrast, inversely proportional to the release rate and to the content of this active hydroxyapatite component, HAP2. The empirical release profiles were fitted to a set of equations that could be used to tune the release rate to the therapeutic occasion. All of the cements loaded with vancomycin or ciprofloxacin inhibited the growth of Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli and Pseudomonas aeruginosa in both agar diffusion assays and broth dilution tests with intensities either comparable to the antibiotic per se, as in the case of ciprofloxacin, or even larger than the antibiotic alone, as in the case of vancomycin. Interestingly, even the pure cements exhibited an antibacterial effect ranging from moderate to strong, while demonstrating high levels of biocompatibility with osteoclastic RAW264.7 cells and only slightly affecting the viability of the osteoblastic MC3T3-E1 cells, in direct proportion with the amount of the more active hydroxyapatite component in the cements. This antibacterial effect was especially noticeable against Gram-negative bacteria, where the growth inhibition by the cements was comparable to or even stronger than that of the pure antibiotics. The antibiofilm assay against P. aeruginosa biofilms reiterated the antibiotic effectiveness of pure, antibiotic-free cements. That the carrier per se, composed of a nontoxic, easily prepared, bone mineral composite, can exhibit a strong antibacterial effect even in the absence of an antibiotic drug is an insight highly relevant in view of the rising resistance of an array of pathogens to traditional antibiotic therapies and the demands for the timely development of suitable alternatives.