Synthesis of Cu-Nanoparticle Hydrogel with Self-Healing and Photothermal Properties

From prevention to diagnosis and treatment: Biomedical applications of metal nanoparticle-hydrogel composites

Recent advances in biomaterials integrate metal nanoparticles with hydrogels to generate composite materials that exhibit new or improved properties. By precisely controlling the composition, arrangement and interactions of their constituents, these hybrid materials facilitate biomedical applications through myriad approaches. In this work we seek to highlight three popular frameworks for designing metal nanoparticle-hydrogel hybrid materials for biomedical applications. In the first approach, the properties of metal nanoparticles are incorporated into a hydrogel matrix such that the composite is selectively responsive to stimuli such as light and magnetic flux, enabling precisely activated therapeutics and self-healing biomaterials. The second approach mediates the dynamic reorganization of metal nanoparticles based on environment-directed changes in hydrogel structure, leading to chemosensing, microbial and viral detection, and drug-delivery capabilities. In the third approach, the hydrogel matrix spatially arranges metal nanoparticles to produce metamaterials or passively enhance nanoparticle properties to generate improved substrates for biomedical applications including tissue engineering and wound healing. This article reviews the construction, properties and biomedical applications of metal nanoparticle-hydrogel composites, with a focus on how they help to prevent, diagnose and treat diseases. Discussion includes how the composites lead to new or improved properties, how current biomedical research leverages these properties and the emerging directions in this growing field.

Flexible Transparent Polypyrrole-Decorated MXene-Based Film with Excellent Photothermal Energy Conversion Performance

Flexible transparent heaters based on photothermal energy conversion are highly desired for next-generation electronic devices. However, how to balance the photothermal conversion efficiency and transparency is still a huge challenge. In this work, we demonstrate a flexible polycarbonate (PC) film with balanced photothermal energy conversion performance and transparency obtained from the spraying polypyrrole (PPy)-modified Ti₃C₂T_x MXene (MXene@PPy) layer. Due to the synergistic light-to-heat effects of MXene and the attached PPy nanoparticles, the resulted transparent film heater (MP-PC) can obtain a satisfying photothermal conversion performance (47.5 °C at 100 mW/cm²) at a low spraying density of MXene and thus show an effective transmittance of 51.61%, simultaneously. Moreover, the photothermal conversion performance reveals an outstanding stability without significant deterioration after exposing to an outdoor environment for seven months. Besides, arising from the excellent surface electrical resistance (413 Ω/sq), the MP-PC film also exhibits an effective Joule heating capacity with a high heating temperature of 108 °C at 24 V input voltage. As one of the promising applications, the MP-PC film exhibits the effectiveness and feasibility as a light-triggered thermal therapy film for human skin in cold environments.

Antibacterial and cytotoxic evaluation of copper and zinc oxide nanoparticles as a potential disinfectant material of connections in implant provisional abutments: An in-vitro study

OBJECTIVE

This study evaluates the antibacterial activity against mono and multispecies bacterial models and the cytotoxic effects of zinc oxide and copper nanoparticles(ZnO-NPs/Cu-NPs) in cell cultures of human gingival fibroblasts(HGFs).

DESIGN

The antibacterial activities of ZnO-NPs and Cu-NPs against 4 bacteria species were tested according to their minimum inhibitory concentrations(MICs) and against mature multispecies anaerobic model by spectral confocal laser scanning microscopy. The viabilities and cytotoxic effects of ZnO-NPs and Cu-NPs to HGFs cell cultures were tested by MTT, LDH assays, production of ROS, and the activation of caspase-3. The results were analyzed using one-way ANOVA followed by Tukey tests, considering p < 0.05 as statistically significant.

RESULTS

For all strains, MICs of ZnO-NPs and Cu-NPs were in the range of 78.3 μg/mL-3906 μg/mL and 125 μg/mL-625 ug/mL, respectively. In a multispecies model, a significant decrease in the total biomass volume(μ3) was observed in response to exposure to 125 μg/mL of each NPs for which there was bactericidal activity. Significant differences were found between the volumes of viable and nonviable biomass exposed to nanostructures with Cu-NPs compared to ZnO-NPs. Both NPs induced mitochondrial dose-dependent cytotoxicity, ZnO-NPs increases LDH release and intracellular ROS generation. Cu-NPs at a concentration of 50 μg/mL induced production of cleaved caspase-3, activating the apoptotic pathway early and at low doses.

CONCLUSIONS

After 24 h, ZnO-NPs are biocompatible between 78-100 μg/mL and Cu-NPs below 50 μg/mL. Antibacterial activity in a monospecies model is strain dependent, and in a multispecies model was a lower doses after 10 min of exposure.

Injectable Self-Healing Hydrogels Containing CuS Nanoparticles with Abilities of Hemostasis, Antibacterial activity, and Promoting Wound Healing

Injectable self-healing hydrogels containing functional nanoparticles (NPs) have attracted much attention in many fields of biomedicine. A series of injectable self-healing hydrogels containing PEGylation CuS NPs based on N-carboxyethyl chitosan (CEC) and oxidized sodium alginate (OA) were developed by taking advantages of the unique functions of CuS NPs and chitosan, referred to as CuS NP hydrogels or CEC-OA_m-CuS_n, where "m" stands for the concentration percentage of the added OA solution (w/v) and "n" represents the molar concentration of CuS NPs in the hydrogels. The physical properties of CuS NP hydrogels, syringeability, rapid self-repair ability, and photothermal performance were systematically investigated. The multiple functions for CuS NP hydrogels requested in the skin healing process were explored. The results showed that CuS NP hydrogels had not only adjustable physical properties and good injectable self-healing characteristics but also excellent functionalities, concurrently including hemostatic ability, bacteria killing capability, and cell migration and proliferation promotion. In vivo wound healing and histomorphological examinations of immunofluorescence staining in a mouse full-thickness wound model demonstrated good acceleration effects of these hydrogels for infected wound healing. Therefore, these injectable self-healing CuS NP hydrogels which possess the abilities of hemostasis, antibacterial activity, and infected-wound healing promotion exhibit great potential as in situ wound dressings.

Aqueous Systems with Tunable Fluorescence Including White-Light Emission for Anti-Counterfeiting Fluorescent Inks and Hydrogels

White-light-emitting materials have attracted wide interest for potential applications in information displays and lighting. To date, the majority of reported white-light-emitting materials have been multicomponent systems that are typically processed with organic solvents. These features are associated with complex processing, poor white-light quality, and environmental pollution. Herein, a white-light-emitting aqueous system is realized by encapsulating a fluorophore, which has a vibration-induced emission effect, in Pluronic F127 micelles. Tunable multicolor fluorescence is achieved by changing the temperature, and the use of organic solvents is effectively avoided. Through this process, white-light emission with Commission Internationale de l'Eclairage coordinates of (0.3351, 0.3326) is obtained, which is very close to pure white light, and its color rendering index is as high as 89. The fluorescence color tunability of this system could be performed in a wide temperature range, rendering it a potential material in optical thermometry. Besides, the aqueous system also allows for the application of the material as a fluorescent ink and white-light-emitting hydrogels. Information could be embedded in paper-based materials and hydrogels through the fluorescence quenching effect of iron ions (Fe³⁺) on the fluorophore. Fluorescence could then be recovered upon removal of Fe³⁺ by adenosine 5'-triphosphate. Thus, fluorescent patterning and triple-mode anti-counterfeiting could be expected due to the temperature-sensitive emission, fluorescence quenching, and recovering properties.

Osteoblastic differentiation of stem cells induced by graphene oxide-hydroxyapatite-alginate hydrogel composites and construction of tissue-engineered bone

This study aimed to investigate the effect of graphene oxide (GO)-hydroxyapatite (HA)-sodium alginate (SA) composite application in the field of bone tissue engineering. Four scaffold groups were established (SA-HA, SA-HA-0.8%GO, SA-HA-1.0%GO and SA-HA-1.2%GO) and mixed with bone marrow mesenchymal stem cells (BMSCs). Hydrogel viscosity was measured at room temperature, and after freeze-drying and Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) to detect substance crystallinity, the printability of each hydrogel type was measured with a printing grid. Scanning electron microscopy (SEM) was used to observe the internal microstructure of the scaffolds and to evaluate the growth and proliferation of cells on the scaffold. A hollow cylinder was printed to compare the forming effect of the hydrogel bioinks, and cell-hydrogel composites were implanted under the skin of nude mice to observe the effect of the hydrogels on osteogenesis in vivo. Increased GO concentrations led to reduced scaffold degradation rates, increased viscosity, increased printability, increased mechanical properties, increased scaffold porosity and increased cell proliferation rates. In vivo experiments showed that hematoxylin and eosin (HE) staining, Alizarin red staining, alkaline phosphatase staining and collagen type I immunohistochemical staining increased as the implantation time increased. These results demonstrate that GO composites have high printability as bioinks and can be used for bioprinting of bone by altering the ratio of the different components.

A 3D hydrogel based on chitosan and carbon dots for sensitive fluorescence detection of microRNA-21 in breast cancer cells

Hydrogels are 3D polymeric networks with great swelling capability in water and appropriate chemical, mechanical and biological features which make it feasible to maintain bioactive substances. Herein, we fabricated carbon dots-chitosan nanocomposite hydrogels via reacting carbon dots synthesized from various aldehyde precursors with chitosan after that functionalized with ssDNA probe for detection of microRNA-21 in MCF-7 cancer cells. More importantly, three fluorescent hydrogels were produced using schiff base reaction (forming imine bonds) among the amine in chitosan and aldehyde groups on the CDs surface. Furthermore, the hydrogel films, CDs and CDs-chitosan nanocomposite hydrogels were characterized by UV-vis absorption and fluorescence spectra, FT-IR, scanning electron microscope (SEM) and transmission electron microscopy (TEM). The DNA hydrogel bioassay strategy revealed a great stability and a superb sensitivity for microRNA-21, with a suitable linear range (0.1-125 fM) and a detection limit (0.03 fM). For sample analysis, the biosensors exhibited good linearity with MCF-7 cancer cell concentrations from 1000 to 25000, 1000-25000 and 1000-6000 cells mL^-1 and detection limit of 310, 364 and 552 cells mL^-1, for glutaraldehyde, nitrobezaldehyde and benzaldehyde based nanocomposite hydrogels, respectively. In addition, cell viability consequences demonstrated low probe cytotoxicity, so nanocomposite hydrogels was utilized to multicolor imaging of MCF-7 cancer cells.

Antibacterial Hybrid Hydrogels

Bacterial infectious diseases and bacterial-infected environments have been threatening the health of human beings all over the world. In view of the increased bacteria resistance caused by overuse or improper use of antibiotics, antibacterial biomaterials are developed as the substitutes for antibiotics in some cases. Among them, antibacterial hydrogels are attracting more and more attention due to easy preparation process and diversity of structures by changing their chemical cross-linkers via covalent bonds or noncovalent physical interactions, which can endow them with various specific functions such as high toughness and stretchability, injectability, self-healing, tissue adhesiveness and rapid hemostasis, easy loading and controlled drug release, superior biocompatibility and antioxidation as well as good conductivity. In this review, the recent progress of antibacterial hydrogel including the fabrication methodologies, interior structures, performances, antibacterial mechanisms, and applications of various antibacterial hydrogels is summarized. According to the bacteria-killing modes of hydrogels, several representative hydrogels such as silver nanoparticles-based hydrogel, photoresponsive hydrogel including photothermal and photocatalytic, self-bacteria-killing hydrogel such as inherent antibacterial peptides and cationic polymers, and antibiotics-loading hydrogel are focused on. Furthermore, current challenges of antibacterial hydrogels are discussed and future perspectives in this field are also proposed.

Natural Polymer-Based Antimicrobial Hydrogels without Synthetic Antibiotics as Wound Dressings

Wound healing is usually accompanied by bacterial infection. The excessive use of synthetic antibiotics leads to drug resistance, posing a significant threat to human health. Hydrogel-based wound dressings aimed at mitigating bacterial infections have emerged as an effective wound treatment. The review presented herein particularly focuses on the hydrogels originating from natural polymers. To further enhance the performance of wound dressings, various strategies and approaches have been developed to endow the hydrogels with excellent broad-spectrum antibacterial activity. Those that are summarized in the current review are the hydrogels with intrinsic or stimuli-triggered bactericidal properties and others that serve as vehicles for loading antibacterial agents without synthetic antibiotics. Specific attention is paid to antimicrobial mechanisms and the antibacterial performance of hydrogels. Practical antibacterial applications to accelerate the wound healing employing these antibiotic-free hydrogels are also introduced along with the discussion on the current challenges and perspectives leading to new technologies.

A novel xanthan gum-based conductive hydrogel with excellent mechanical, biocompatible, and self-healing performances

Tough and conductive hydrogels are promising materials for various applications. However, it remains a great challenge to develop an integrated hydrogel combining outstanding mechanical, conductive, and self-healing performances. Herein, we prepared a conductive, self-healing, and tough hydrogel by constructing synergistic multiple interaction among montmorillonite (MMT), Poly (acrylamide-co-acrylonitrile) (P(AAm-co-AN)), xanthan gum (XG) and ferric ion (Fe³⁺). The obtained xanthan gum/montmorillonite/Poly (acrylamide-co-acrylonitrile) (XG/MMT/PAAm) hydrogels showed high strain stress (0.48 MPa) and compressive stress (5.9 MPa) as well as good shape recovery after multiple loading-unloading cycle tests. Moreover, the XG/MMT/PAAm hydrogels have distinctive features such as remarkable resistance to fatigue and harsh environments, insensitivity to notch, conductive, biocompatible, pH-dependent swelling behaviors and self-healing. Therefore, the as-fabricated hydrogel delivers a new prospect for its applications in various fields, such as flexible conductive device and tissue engineering.

Nanoparticle-Based Wound Dressing: Recent Progress in the Detection and Therapy of Bacterial Infections

Bacterial infections in wounds often delay the healing process, and may seriously threaten human life. It is urgent to develop wound dressings to effectively detect and treat bacterial infections. Nanoparticles have been extensively used in wound dressings because of their specific properties. This review highlights the recent progress on nanoparticle-based wound dressings for bacterial detection and therapy. Specifically, nanoparticles have been applied as intrinsic antibacterial agents or drug delivery vehicles to treat bacteria in wounds. Moreover, nanoparticles with photothermal or photodynamic property have also been explored to endow wound dressings with significant optical properties to further enhance their bactericidal effect. More interestingly, nanoparticle-based smart dressings have been recently explored for bacteria detection and treatment, which enables an accurate assessment of bacterial infection and a more precise control of on-demand therapy.

Mechanically Robust, Self-Healing, Polymer Blends and Polymer/Small Molecule Blend Materials with High Antibacterial Activity

There is a growing demand for antibacterial materials around the world in recent years because they can be used for preventing pathogen infection, which is one of the major threats to human health. However, the mechanical damage of the antibacterial materials may weaken their protective effect since bacteria can invade through the cracks of the material. Therefore, antibacterial materials with self-healing ability, in which the mechanical damage can be spontaneously healed, exhibit better reliability and a longer lifespan. In this article, we prepared a series of low-cost antibacterial polymer blends and polymer/small molecule blend materials with excellent self-healing ability and high mechanical strength by a one-pot reaction under mild conditions. These materials were facilely obtained by blending a tiny amount of commercialized cationic antibacterial chemicals, poly(ethylene imine) (PEI) or cetyltrimethylammonium bromide (CTAB), into a self-healing, mechanically robust polymer, poly(ether-thioureas) (PETU). It can be found that they can effectively kill Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) on their surface. Meanwhile, the distinguished advantages of PETU, including self-healing property, excellent mechanical robustness, recyclability, and transparency, were perfectively maintained. Furthermore, it was shown that their cytotoxicity was satisfactory and their hemolytic activity was insignificant. The above advantages of the blend materials suggested their potential applications in health care, food industry, and environmental hygiene.

miR-23a-3p-abundant small extracellular vesicles released from Gelma/nanoclay hydrogel for cartilage regeneration

Articular cartilage has limited self-regenerative capacity and the therapeutic methods for cartilage defects are still dissatisfactory in clinic. Recent studies showed that exosomes derived from mesenchymal stem cells promoted chondrogenesis by delivering bioactive substances to the recipient cells, indicating exosomes might be a novel method for repairing cartilage defect. Herein, we investigated the role and mechanism of human umbilical cord mesenchymal stem cells derived small extracellular vesicles (hUC-MSCs-sEVs) on cartilage regeneration. In vitro results showed that hUC-MSCs-sEVs promoted the migration, proliferation and differentiation of chondrocytes and human bone marrow mesenchymal stem cells (hBMSCs). MiRNA microarray showed that miR-23a-3p was the most highly expressed among the various miRNAs contained in hUC-MSCs-sEVs. Our data revealed that hUC-MSCs-sEVs promoted cartilage regeneration by transferring miR-23a-3p to suppress the level of PTEN and elevate expression of AKT. Moreover, we fabricated Gelatin methacrylate (Gelma)/nanoclay hydrogel (Gel-nano) for sustained release of sEVs, which was biocompatible and exhibited excellent mechanical property. In vivo results showed that hUC-MSCs-sEVs containing Gelma/nanoclay hydrogel (Gel-nano-sEVs) effectively promoted cartilage regeneration. These results indicated that Gel-nano-sEVs have a promising capacity to stimulate chondrogenesis and heal cartilage defects, and also provided valuable data for understanding the role and mechanism of hUC-MSCs-sEVs in cartilage regeneration.

Gelatin sponge functionalized with gold/silver clusters for antibacterial application

Pathogenic bacterial infection, especially in the wound, may threaten human health. Developing new antibacterial materials for wound healing is still urgent. Metal nanoclusters have been explored as a novel antibacterial agent. Herein, biomolecule gelatin was chosen as a substrate and functionalized with gold/silver clusters for bacterial killing. Through a simple amidation reaction, gold/silver clusters were successfully conjugated in a gelatin substrate to obtain a Au/Ag@gelatin sponge. The presence of gold/silver clusters modified the porous structure of the gelatin. Thus, the water absorption and water retention of the Au/Ag@gelatin sponge were enhanced. More importantly, the gold/silver clusters show aggregation-enhanced emission and strong reactive oxygen generation, that endow the Au/Ag@gelatin sponge with a good antibacterial property. The good physical performance and favorable bactericidal activity of the Au/Ag@gelatin sponge suggest its potential for application as a wound dressing.

Self-healing conductive hydrogels: preparation, properties and applications

Conductive hydrogels have generated great interest in biomedical and electrical fields. However, conventional conductive hydrogels usually lack self-healing properties, which might be unfavorable for their application. Conductive self-healing hydrogels with excellent performance for applications in the biomedical and electrical fields are growing in number. In this review paper, the progress related to conductive self-healing hydrogels is summarized. The self-healing mechanism is classified to demonstrate the design and synthesis of conductive self-healing hydrogels and their applications in tissue engineering, wound healing, electronic skin, sensors and self-repaired circuits are presented and discussed. The future development of conductive self-healing hydrogels and problems that need to be solved are also described.

Self-Healing and Highly Stretchable Gelatin Hydrogel for Self-Powered Strain Sensor

Hydrogels that electronically respond to mechanical changes can be used as strain sensors. However, these systems usually require external power to convert changes in strain into electrical signals. Here, a self-powered strain sensor is developed based on a gelatin-based hydrogel and a galvanic cell. In the hydrogel matrix, hydrophobic interactions and hydrogen bonding between tannic acid and gelatin give the prepared hydrogel great potential for elongation (1600%). The hydrogel also has a rapid self-healing ability (within 0.65 s) and high self-healing efficiency (95%). The hydrogel operates as an efficient electrolyte material and forms a hydrogel battery when assembled with a thin layer of zinc and an air electrode. This device had excellent tolerance to large compressional strain without sacrificing open-circuit voltage. On the basis of this hydrogel battery, we fabricated a self-powered strain sensor by connecting the hydrogel battery to a fixed resistor to form a closed loop. By converting its chemical energy into electrical energy, the self-powered sensor efficiently converted resistance changes, caused by stretching or compression of the hydrogel, into changes in the voltage output signals without external power. Owing to the stretchability of the hydrogel, the self-powered sensor exhibited good response and flexibility. Self-healing and continuous cycling tests confirmed the long-term stability of the device. These properties suggest that our self-powered sensor has a potential for applications to portable and wearable electronic devices.

3D Graphene-Based Macrostructures for Water Treatment

Recently, 3D graphene-based macrostructures (3D GBMs) have gained increased attention due to their immense application potential in water treatment. The unique structural features (e.g., large surface area and physically interconnected porous network) as well as fascinating properties (e.g., high electrical conductivity, excellent chemical/thermal stability, ultralightness, and high solar-to-thermal conversion efficiency) render 3D GBMs as promising materials for water purification through adsorption, capacitive deionization, and solar distillation. Moreover, 3D GBMs can serve as scaffolds to immobilize powder nanomaterials to build monolithic adsorbents and photo-/electrocatalysts, which significantly broadens their potential applications in water treatment. Here, recent advances in their synthesis and application toward water purification are highlighted. Remaining challenges and future perspectives are elaborated to highlight future research directions.

Spatiotemporally Controlled Multiplexed Photothermal Microfluidic Pumping under Monitoring of On-Chip Thermal Imaging

Intelligent contactless microfluidic pumping strategies have been increasingly desirable for operation of lab-on-a-chip devices. Herein, we present a photothermal microfluidic pumping strategy for on-chip multiplexed cargo transport in a contactless and spatiotemporally controllable fashion based on the application of near-infrared laser-driven photothermal effect in microfluidic paper-based devices (μPDs). Graphene oxide (GO)-doped thermoresponsive poly(N-isopropylacrylamide)-acrylamide hydrogels served as the photothermally responsive cargo reservoirs on the μPDs. In response to remote contactless irradiation by an 808 nm laser, on-chip phase transition of the composite hydrogels was actuated in a switchlike manner as a result of the photothermal effect of GO, enabling robust on-chip pumping of cargoes from the hydrogels to predefined arrays of reaction zones. The thermal imaging technique was employed to monitor the on-chip photothermal pumping process. The microfluidic pumping performance can be spatiotemporally controlled in a quantitative way by remotely tuning the laser power, irradiation time, and GO concentration. The pumping strategy was exemplified by FeCl₃ and horseradish peroxidase as the model cargoes to implement on-chip Prussian blue- and 3,3',5,5'-tetramethylbenzidine-based colorimetric reactions, respectively. Furthermore, multiplexed on-demand microfluidic pumping was achieved by flexibly adjusting the irradiation pathway and the microfluidic pattern. The new microfluidic pumping strategy shows great promise for diverse microfluidic applications due to its flexibility, high integratability into lab-on-a-chip devices, and contactless and spatiotemporal controllability.

Plasmonic Ti3C2Tx MXene Enables Highly Efficient Photothermal Conversion for Healable and Transparent Wearable Device

Skin-mountable and transparent devices are highly desired for next-generation electronic applications but are susceptible to unexpected ruptures or undesired scratches, which can drastically reduce the device lifetime. Developing wearable and transparent materials with healable function that can recover their original functionality after mechanical damage under mild and noninvasive repairing operation is thus imperative. Herein, we demonstrate that the incorporation of ultrasmall quantities of plasmonic silver nanoparticle (AgNP)@MXene nanosheet hybrids to serve as photothermal fillers in waterborne elastic polyurethane enables high transparency as well as effective light-triggered healing capabilities for wearable composite coatings. The AgNP@MXene hybrid functions as a highly effective photon captor, energy transformer, and molecular heater due to the amalgamation of (1) ultrahigh photothermal conversion efficiency, high thermal conductivity, and structural properties of MXene, (2) the outstanding plasmonic effect of AgNPs, and (3) the synergistic effects from their hybrids. The resulting wearable composite coating with ultralow loading of plasmonic AgNP@MXene hybrids (0.08 wt % or 0.024 vol %) can produce a significant temperature increase of ∼111 ± 2.6 °C after the application of 600 mW cm^-2 light irradiation for 5 min, while maintaining a high optical transmittance of ∼83% at a thickness of ∼60 μm. This local temperature increase can rapidly heal the mechanical damage to the composite coating, with a healing efficiency above 97%.

Photoplastic Transformation Based on Dynamic Covalent Chemistry

The magical fantasy of decades-old transformer characters is becoming closer to scientific reality, as transformable materials can change their shapes in response to thermal, mechanical, electrical, and chemical stimuli. However, precise and prompt control of plastic shaping remains to be wanted. Photoresponsive materials provide a promising alternative for rapid optomechanical shaping with limited success. Here, we report a new class of photoplastic transformation based on dynamic covalently crosslinked polytriazole (PTA) networks, in which crosslinking points are comprised of photocleaveable hexaarylbiimidazole (HABI). Upon sub-500 nm light irradiation, HABI is dissociated into two triphenylimidazole radicals (TPIRs) followed by spontaneous recombination back to the initial state. This photoswitching effect is demonstrated to generate nonthermal shape change in the PTA-HABI gel network at will upon light stimulus. A unique photoalignment phenomenon has also been discovered which can form oriented nanoscale patterning in the PTA-HABI gel network upon laser irradiation. The solvent-free PTA-HABI elastomer exhibits photoenhanced automatic self-healing properties at temperatures ranging from 25 °C to freezing points, which is attributed to the dynamic equilibrium between TPIRs and HABI. A photoplastic spring is fabricated and exhibits photoswitchable plastic behavior, i.e., a reversible transformation between plastic strain and elastic strain upon light irradiation. HABI-based polymer networks, including solvated gel and solvent-free elastomer, are promising as smart materials for nonthermal photoactivated shape changing, transformation, and self-healing applications.

Nanomaterials with a photothermal effect for antibacterial activities: an overview

Nanomaterials and nanotechnologies have been expected to provide innovative platforms for addressing antibacterial challenges, with potential to even deal with bacterial infections involving drug-resistance. The current review summarizes recent progress over the last 3 years in the field of antibacterial nanomaterials with a photothermal conversion effect. We classify these photothermal nanomaterials into four functional categories: carbon-based nanoconjugates of graphene derivatives or carbon nanotubes, noble metal nanomaterials mainly from gold and silver, metallic compound nanocomposites such as copper sulfide and molybdenum sulfide, and polymeric as well as other nanostructures. Different categories can be assembled with each other to enhance the photothermal effects and the antibacterial activities. The review describes their fabrication processes, unique properties, antibacterial modes, and potential healthcare applications.

Fluorescence imaging guided CpG nanoparticles-loaded IR820-hydrogel for synergistic photothermal immunotherapy

As synergistic photothermal immunotherapy has developed as one of the most attractive strategies for cancer therapy, it is crucial to design an effective photothermal immunotherapy system to enhance the synergistic anti-tumor effect and reveal the essential role of each treatment. In this study, we designed CpG self-crosslinked nanoparticles-loaded IR820-conjugated hydrogel with dual self-fluorescence to exert the combined photothermal-immunotherapy. IR820-hydrogel can be effective for hyperthermia to eliminate the primary tumor based on its comprehensive coverage and generated photothermal-induced tumor antigens for assisted immunotherapy. CpG self-crosslinked nanoparticles improved the immune response of adjuvant against melanoma without extra nano-carriers. The synergistic photothermal immunotherapy was achieved by the merging of CpG self-crosslinked nanoparticles and IR820-hydrogel. A possible mechanism of combined antitumor effect was further revealed by analyzing immune cells including CD8 ⁺T cells, DCs, B cells, Treg and MDSC in tumor microenvironment. The specific antitumor immunity was provoked to remove the tumor residues and ultimately the combined treatment mode achieved more effective systemic therapeutic effect than either photothermal therapy or immunotherapy alone. Furthermore, self-fluorescent IR820-hydrogel and CpG nanoparticles exerted the imaging-guided combined photothermal-immunotherapy by the dual fluorescence imaging method without additional fluorescent labeling. This visible combined photothermal-immunotherapy offers a potential for precise cancer treatment.

Copper-nanoparticle-embedded hydrogel for killing bacteria and promoting wound healing with photothermal therapy

Bacterial infections at wound tissue sites usually delay the wound healing process and even result in severe life-threatening complications. Therefore, it is imperative to develop an efficient strategy to simultaneously enhance the antibacterial abilities and improve the wound healing process. Here, we report a composite hydrogel composed of methacrylate-modified gelatin (Gel-MA) and N,N-bis(acryloyl)cystamine (BACA)-chelated Cu nanoparticles (Cu NPs) via radical polymerization with a photoinitiator. The Cu NPs could effectively convert NIR laser irradiation (808 nm) energy into localized heat due to the localized surface plasmon resonance (LSPR) effect for effecting photothermal therapy. In vitro antimicrobial experiments revealed that the hybrid hydrogel exhibited predominant antibacterial efficacy against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria, while Cu-NP-embedded hydrogel + laser group exhibited superior antibacterial capacity. The excellent antibacterial properties can be attributed to the synergistic effect of photothermal performance and rapid release of copper ions (Cu²⁺) because of the laser irradiation of Cu NPs. Moreover, the released Cu²⁺ could stimulate NIH-3T3 fibroblast proliferation without any inflammatory responses. Moreover, chronic wound healing process of S. aureus-infected model was significantly accelerated with prominent antibacterial ability, reduced inflammatory response, and promoted angiogenesis ability in vivo. In summary, Cu-NP-embedded hydrogels are a promising candidate for skin tissue regeneration and potentially valuable for clinical applications.

Metallogels: Availability, Applicability, and Advanceability

Introducing metal components into gel matrices provides an effective strategy to develop soft materials with advantageous properties such as: optical activity, conductivity, magnetic response activity, self-healing activity, catalytic activity, etc. In this context, a thorough overview of application-oriented metallogels is provided. Considering that many well-established metallogels start from serendipitous discoveries, insights into the structure-gelation relationship will offer a profound impact on the development of metallogels. Initially, design strategies for discovering new metallogels are discussed, then the advanced applications of metallogels are summarized. Finally, perspectives regarding the design of metallogels, the potential applications of metallogels and their derivative materials are briefly proposed.

Mild Synthesis of Copper Nanoparticles with Enhanced Oxidative Stability and Their Application in Antibacterial Films

Copper nanoparticles possess unique physical and chemical properties; however, their application is often restricted, owing to their tendency to oxidize. In this work, we prepared copper nanoparticles with enhanced oxidative stability via a simple and low-cost method, where a modified starch was used as an environmentally friendly reducing agent and biocompatible polyethylenimine was used as a stabilizer. The prepared copper nanoparticles could be stored in air for at least 6 months without any oxidation in a dried state. Interestingly, our synthesis could even be performed at room temperature with a longer reaction time. We used various characterization methods to study the reaction mechanism. The prepared copper nanoparticles were further uniformly doped into an agar film, and this composite showed excellent bacterial killing efficiency, owing to the antibacterial properties of the copper nanoparticles. Our composite film shows potential for various clinical applications, such as wound dressing materials.

Materials and Structures toward Soft Electronics

Soft electronics are intensively studied as the integration of electronics with dynamic nonplanar surfaces has become necessary. Here, a discussion of the strategies in materials innovation and structural design to build soft electronic devices and systems is provided. For each strategy, the presentation focuses on the fundamental materials science and mechanics, and example device applications are highlighted where possible. Finally, perspectives on the key challenges and future directions of this field are presented.

Rapid Biofilm Eradication on Bone Implants Using Red Phosphorus and Near-Infrared Light

Bone-implant-associated infections are common after orthopedic surgery due to impaired host immune response around the implants. In particular, when a biofilm develops, the immune system and antibiotic treatment find it difficult to eradicate, which sometimes requires a second operation to replace the infected implants. Most strategies have been designed to prevent biofilms from forming on the surface of bone implants, but these strategies cannot eliminate the biofilm when it has been established in vivo. To address this issue, a nonsurgical, noninvasive treatment for biofilm infection must be developed. Herein, a red-phosphorus-IR780-arginine-glycine-aspartic-acid-cysteine coating on titanium bone implants is prepared. The red phosphorus has great biocompatibility and exhibits efficient photothermal ability. The temperature sensitivity of Staphylococcus aureus biofilm is enhanced in the presence of singlet oxygen (¹ O₂ ) produced by IR780. Without damaging the normal tissue, the biofilm can be eradicated through a safe near-infrared (808 nm) photothermal therapy at 50 °C in vitro and in vivo. This approach reaches an antibacterial efficiency of 96.2% in vivo with 10 min of irradiation at 50 °C. Meanwhile, arginine-glycine-aspartic-acid-cysteine decorated on the surface of the implant can improve the cell adhesion, proliferation, and osteogenic differentiation.

Metal Nanoparticles for Diagnosis and Therapy of Bacterial Infection

Infectious diseases caused by pathogenic bacteria, especially multidrug-resistant bacteria, and their global spreading have become serious public health concerns. Early diagnosis and effective therapy can efficiently prevent deterioration and further spreading of the infections. There is an urgent need for sensitive, selective, and facile diagnosis as well as therapeutically potent treatment. The emergence of nanotechnology has provided more options for diagnosis and treatments of bacterial infections. Metal nanoparticles and metal oxide nanoparticles have drawn intense attention owing to their unique optical, magnetic, and electrical properties. These versatile metal-based nanoparticles have great potential for selective detection of bacteria and/or therapy. This review gives an overview of recent efforts on developing various metal-based nanoparticles for bacterial detection and infection therapy. It begins with an introduction of fundamental concepts and mechanisms in designing diagnostic and therapeutic strategies. Representative achievements are selected to illustrate the proof-of-concept in vitro and in vivo applications. A brief discussion of challenges and perspective outlook in this field is provided at the end of this review.

Photothermal Cellulose-Patch with Gold-Spiked Silica Microrods Based on Escherichia coli

Plasmonic-mediated photothermal heating under near-infrared (NIR) irradiation is an emerging key technology in the field of photothermal therapy and chemical reactions. However, there are few reports of photothermal film (dry-type patch), and thus, in this work, we developed the plasmonic-induced photothermal cellulose-patch operating in the NIR region. Hollow and spikelike gold nanostructures, gold-spikes, as plasmonic nanoparticles were prepared and decorated on silica microrods, which were prepared based on a unicellular organism, Escherichia coli, as a framework. In addition, freestanding cellulose-patch was prepared by mixing filter-paper pulp and armored golden E. coli (AGE) microrods. The major absorbing peak of AGE solution was revealed to be 873 nm, and the surface temperature of patch was increased to 264 °C within a very short time (1 min). When NIR laser was irradiated on the patch dipped in the water, the formation of water vapor and air bubbles was observed. The heating efficiency of indirect heat transfer via conduction from patch-to-water was 35.0%, while that of direct heat transfer via radiation from patch in water was 86.1%. Therefore, the cellulose-patch containing AGE microrods has possible applicability to desalination and sterilization because of its fast heating rate and high light-to-heat conversion under the irradiation of low-powered IR laser.

Near infrared light activatable PEI-wrapped bismuth selenide nanocomposites for photothermal/photodynamic therapy induced bacterial inactivation and dye degradation

The inactivation of bacteria and the degradation of organic pollutants by engineered nanomaterials (NMs) are very effective approaches for producing safe and clean drinking water. The development of new NMs which can act as NIR light mediated antimicrobial agents as well as photocatalytic agents is highly desired. In this study, a novel Bi2Se3 nanoplates (NPs) NM was prepared by a high-temperature reaction (colloidal synthesis) followed by wrapping of the surface with polyethyleneimine (PEI) through electrostatic interactions. The developed Bi2Se3 NPs/PEI exhibited excellent NIR light activated antimicrobial properties for bacterial eradication and efficient photocatalytic properties for organic dye degradation. The results showed that upon 808 nm laser irradiation the engineered Bi2Se3 NPs/PEI eradicated ∼99% of S. aureus and ∼97% of E. coli bacteria within 10 minutes of irradiation through combined dual-modal photothermal therapy (PTT) and photodynamic therapy (PDT) via the generation of heat and reactive oxygen species, respectively. The contributions of PTT and PDT were found to be in a ratio of nearly 4 : 1 in the killing of both species of bacteria. In addition, Bi2Se3 NPs/PEI also acted as an excellent photocatalyst under illumination by a halogen lamp equipped with a 700-1100 nm band pass filter to achieve degradation efficiencies of ∼95% for methylene blue and ∼93% for Rhodamine B within 3 and 4 h, respectively. To the best of our knowledge, this is the first demonstration of these NIR light activated antimicrobial properties, photodynamic properties and photocatalytic properties mediated by Bi2Se3 NPs.

Recent Progress in Polymer Research to Tackle Infections and Antimicrobial Resistance

Global health is increasingly being threatened by the rapid emergence of drug-resistant microbes. The ability of these microbes to form biofilms has further exacerbated the scenario leading to notorious infections that are almost impossible to treat. For addressing this clinical threat, various antimicrobial polymers, polymer-based antimicrobial hydrogels and polymer-coated antimicrobial surfaces have been developed in the recent past. This review aims to discuss such polymer-based antimicrobial strategies with a focus on their current advancement in the field. Antimicrobial polymers, whose designs are inspired from antimicrobial peptides (AMPs), are described with an emphasis on structure-activity analysis. Additionally, antibiofilm activity and in vivo efficacy are delineated to elucidate the real potential of these antimicrobial polymers as possible therapeutics. Antimicrobial hydrogels, prepared from either inherently antimicrobial polymers or biocide-loaded into polymer-derived hydrogel matrix, are elaborated followed by various strategies to engineer polymer-coated antimicrobial surfaces. In the end, the current challenges are accentuated along with future directions for further expansion of the field toward tackling infections and antimicrobial resistance.

Synthesis of photothermal nanocomposites and their application to antibacterial assays

In this work, we report a novel gold nanorod (AuNR)-based nanocomposite that shows strong binding to bacterium and high antibacterial efficiency. The AuNRs were used as a photothermal material to transform near-infrared radiation (NIR) into heat. We selected poly (acrylic acid) to modify the surface of the AuNRs based on a simple self-assembly method. After conjugation of the bacterium-binding molecule vancomycin, the nanocomposites were capable of efficiently gathering on the cell walls of bacteria. The nanocomposites exhibited a high bacterial inhibition capability owing to NIR-induced heat generation in situ. Therefore, the prepared photothermal nanocomposites show great potential for use in antibacterial assays.