Block Copolymer Nanocomposites with High Refractive Index Contrast for One-Step Photonics

Enhanced Hybridization and Nanopatterning via Heated Liquid-Phase Infiltration into Self-Assembled Block Copolymer Thin Films

Organic-inorganic hybrids featuring tunable material properties can be readily generated by applying vapor- or liquid-phase infiltration (VPI or LPI) of inorganic materials into organic templates, with resulting properties controlled by type and quantity of infiltrated inorganics. While LPI offers more diverse choices of infiltratable elements, it tends to yield smaller infiltration amount than VPI, but the attempt to address the issue has been rarely reported. Here, we demonstrate a facile temperature-enhanced LPI method to control and drastically increase the quantity and kinetics of Pt infiltration into self-assembled polystyrene-block-poly(2-vinylpyridine) block copolymer (BCP) thin films. By applying LPI at mildly elevated temperatures (40-80 °C), we showcase controllable optical functionality of hybrid BCP films along with conductive three-dimensional (3D) inorganic nanostructures. Structural analysis reveals enhanced metal loading into the BCP matrix at higher LPI temperatures, suggesting multiple metal ion infiltration per monomer of P2VP. Combining temperature-enhanced LPI with hierarchical multilayer BCP self-assembly, we generate BCP-metal hybrid optical coatings featuring tunable antireflective properties as well as scalable conductive 3D Pt nanomesh structures. Enhanced material infiltration and control by temperature-enhanced LPI not only enables tunability of organic-inorganic hybrid nanostructures and properties but also expands the application of BCPs for generating uniquely functional inorganic nanostructures.

Bioinspired structural color nanocomposites with healable capability

This minireview summarizes the recent development of healable structural color nanocomposites from the perspective of the construction strategies.

Polymer-guided assembly of inorganic nanoparticles

The self-assembly of inorganic nanoparticles is of great importance in realizing their enormous potentials for broad applications due to the advanced collective properties of nanoparticle ensembles. Various molecular ligands (e.g., small molecules, DNAs, proteins, and polymers) have been used to assist the organization of inorganic nanoparticles into functional structures at different hierarchical levels. Among others, polymers are particularly attractive for use in nanoparticle assembly, because of the complex architectures and rich functionalities of assembled structures enabled by polymers. Polymer-guided assembly of nanoparticles has emerged as a powerful route to fabricate functional materials with desired mechanical, optical, electronic or magnetic properties for a broad range of applications such as sensing, nanomedicine, catalysis, energy storage/conversion, data storage, electronics and photonics. In this review article, we summarize recent advances in the polymer-guided self-assembly of inorganic nanoparticles in both bulk thin films and solution, with an emphasis on the role of polymers in the assembly process and functions of resulting nanostructures. Precise control over the location/arrangement, interparticle interaction, and packing of inorganic nanoparticles at various scales are highlighted.

Full Gamut Wall Tunability from Persistent Micelle Templates via Ex Situ Hydrolysis

The predictive self-assembly of tunable nanostructures is of great utility for broad nanomaterial investigations and applications. The use of equilibrium-based approaches however prevents independent feature size control. Kinetic-controlled methods such as persistent micelle templates (PMTs) overcome this limitation and maintain constant pore size by imposing a large thermodynamic barrier to chain exchange. Thus, the wall thickness is independently adjusted via addition of material precursors to PMTs. Prior PMT demonstrations added water-reactive material precursors directly to aqueous micelle solutions. That approach depletes the thermodynamic barrier to chain exchange and thus limits the amount of material added under PMT-control. Here, an ex situ hydrolysis method is developed for TiO₂ that mitigates this depletion of water and nearly decouples materials chemistry from micelle control. This enables the widest reported PMT range (M:T = 1.6-4.0), spanning the gamut from sparse walls to nearly isolated pores with ≈2 Å precision adjustment. This high-resolution nanomaterial series exhibits monotonic trends where PMT confinement within increasing wall-thickness leads to larger crystallites and an increasing extent of lithiation, reaching Li_0.66 TiO₂ . The increasing extent of lithiation with increasing anatase crystallite dimensions is attributed to the size-dependent strain mismatch of anatase and bronze polymorph mixtures.

Hierarchical Photonic Pigments via the Confined Self-Assembly of Bottlebrush Block Copolymers

Hierarchical, structurally colored materials offer a wide variety of visual effects that cannot be achieved with standard pigments or dyes. However, their fabrication requires simultaneous control over multiple length-scales. Here we introduce a robust strategy for the fabrication of hierarchical photonic pigments via the confined self-assembly of bottlebrush block copolymers within emulsified microdroplets. The bottlebrush block copolymer self-assembles into highly ordered concentric lamellae, giving rise to a near perfect photonic multilayer in the solid state, with reflectivity up to 100%. The reflected color can be readily tuned across the whole visible spectrum by either altering the molecular weight or by blending the bottlebrush block copolymers. Furthermore, the developed photonic pigments are responsive, with a selective and reversible color change observed upon swelling in different solvents. Our system is particularly suited for the scalable production of photonic pigments, arising from their rapid self-assembly mechanism and size-independent color.

New approach to electron microscopy imaging of gel nanocomposites in situ

Characterization of Au-nanocomposites is routinely done with scattering techniques where the structure and ordering of nanoparticles can be analyzed. Imaging of Poloxamer gel-based Au-nanocomposites is usually limited to cryo-TEM imaging of cryo-microtomed thin sections of the specimen. While this approach is applicable for imaging of the individual nanoparticles and gauging their size distribution, it requires altering the state of the specimen and is prone to artifacts associated with preparation protocols. Use of Scanning Transmission Electron Microscopy (S/TEM) with fluid cell in situ provides an opportunity to analysis of these complex materials in their hydrated state with nanometer resolution, yet dispensing dense gel-based samples onto electron-transparent substrates remains challenging. We show that Poloxamer gel-based Au nanocomposites exhibiting thermoreversible behavior can be imaged in a fully hydrated state using a commercially available fluid cell holder, and we describe a specimen preparation method for depositing femtoliter amounts of gel-based nanocomposites directly onto the 50 nm-thick SiN window membranes. Ultimately, fluid cell S/TEM in situ imaging approach offers a pathway to visualization of individual nanoparticles within a thick gel media while maintaining the hydrated state of the carrier polymeric matrix.

Liquid crystalline moiety-assisted perpendicular orientation of cylindrical domains within P4VP-b-PMA(Az) films with high aspect ratio

Block copolymer (BCP) films with perpendicularly aligned cylindrical domains of high aspect ratio have important applications in diverse fields. However, an aspect ratio of the cylinders as high as 200 has rarely been reported so far. Here we demonstrate an efficient route to the formation of normally aligned P4VP cylinders with high aspect ratio surrounded by a matrix of azobenzene-containing block (PMA(Az)) via hierarchical self-assembly. A crisscross structure, consisting of parallelly aligned liquid crystalline (LC) layers and normally aligned self-assembly domains, is expected to assist the formation of well-defined nanostructures. The LC layers in the cylindrical films self-assemble to form smectic phase after solvent annealing, as confirmed by WAXD and UV-vis spectra. We found that the aspect ratio of the vertical P4VP cylinders is up to 200 and the film thickness reaches 6 μm. P4VP is a functional polymer, making this P4VP-b-PMA(Az) film more suitable for advanced filters, multi-nanochannels, nanolithography, and high-density storage media, etc.

Hierarchical Order in Dewetted Block Copolymer Thin Films on Chemically Patterned Surfaces

We investigated the dewetting process on flat and chemically patterned surfaces of ultrathin films (thickness between 2 and 15 nm) of a cylinder forming polystyrene- block-poly(methyl methacrylate) (PS- b-PMMA) spin coated on poly(styrene- r-methyl methacrylate) random copolymers (RCPs). When the PS- b-PMMA film dewets on a 2 nm-thick RCP layer, the ordering of the hexagonally packed PMMA cylinders in the dewetted structures extends over distances far exceeding the correlation length obtained in continuous block copolymer (BCP) films. As a result, micrometer-sized circular droplets featuring defectless single grains of self-assembled PS- b-PMMA with PMMA cylinders perpendicularly oriented with respect to the substrate are generated and randomly distributed on the substrate. Additionally, alignment of the droplets along micrometric lines was achieved by performing the dewetting process on large-scale chemically patterned stripes of 2 nm thick RCP films by laser lithography. By properly adjusting the periodicity of the chemical pattern, it was possible to tune and select the geometrical characteristics of the dewetted droplets in terms of maximum thickness, contact angle and diameter while maintaining the defectless single grain perpendicular cylinder morphology of the circular droplets.

One Dimensional Photonic Crystals Using Ultrahigh Refractive Index Chalcogenide Hybrid Inorganic/Organic Polymers

We report on the fabrication of wholly polymeric one-dimensional (1-D) photonic crystals (i.e., Bragg reflectors, Bragg mirrors) via solution processing for use in the near (NIR) and the short wave (SWIR) infrared spectrum (1-2 μm) with very high reflectance (R ∼ 90-97%). Facile fabrication of these highly reflective films was enabled by direct access to solution processable, ultrahigh refractive index polymers, termed, Chalcogenide Hybrid Inorganic/Organic Polymers (CHIPs). The high refractive index (n) of CHIPs materials (n = 1.75-2.10) allowed for the production of narrow band IR Bragg reflectors with high refractive index contrast (Δn ∼ 0.5) when fabricated with low n polymers, such as cellulose acetate (n = 1.47). This is the highest refractive index contrast (Δn ∼ 0.5) demonstrated for an all-polymeric Bragg mirror which directly enabled high reflectivity from films with 22 layers or less. Facile access to modular, thin, highly reflective films from inexpensive CHIPs materials offers a new route to IR Bragg reflectors and other reflective coatings with potential applications for IR photonics, commercial sensing, and LIDAR applications.

Synthesis of Transparent Aqueous ZrO2 Nanodispersion with a Controllable Crystalline Phase without Modification for a High-Refractive-Index Nanocomposite Film

The controllable synthesis of metal oxide nanoparticles is of fundamental and technological interest. In this article, highly transparent aqueous nanodispersion of ZrO₂ with controllable crystalline phase, high concentration, and long-term stability was facilely prepared without any modification via the reaction of inexpensive inorganic zirconium salt and sodium hydroxide in water under an acid surrounding, combined with hydrothermal treatment. The as-prepared transparent nanodispersion had an average particle size of 7 nm, a high stability of 18 months, and a high solid content of 35 wt %. ZrO₂ nanocrystals could be readily dispersed in many solvents with high polarity including ethanol, dimethyl sulfoxide, acetic acid, ethylene glycol, and N, N-dimethylformamide, forming stable transparent nanodispersions. Furthermore, highly transparent polyvinyl alcohol/ZrO₂ nanocomposite films with high refractive index were successfully prepared with a simple solution mixing route. The refractive index could be tuned from 1.528 to 1.754 (@ 589 nm) by changing the mass fraction (0-80 wt %) of ZrO₂ in transparent nanocomposite films.

One-Step Anionic Copolymerization Enables Formation of Linear Ultrahigh-Molecular-Weight Block Copolymer Films Featuring Vivid Structural Colors in the Bulk State

Ultrahigh-molecular-weight (UHMW) tapered block copolymers (BCPs) consisting of polyisoprene- block-poly(4-methylstyrene) featuring overall molar masses in the range of 1101-2033 kg mol^-1 ( M_w) are synthesized via a convenient one-step anionic copolymerization protocol. The obtained UHMW BCPs are investigated by differential scanning calorimetry, size exclusion chromatography, and ¹H NMR spectroscopy. Microphase separation for the UHMW BCPs in the bulk state is investigated by transmission electron microscopy (TEM) measurements and scanning electron microscopy (SEM), revealing well-ordered lamellar and spherical domains with large domain sizes in the range of 100-200 nm. Excellent order and periodicity are observed for lamellar morphologies over large film areas of 90 × 120 μm. Because of this high order of the underlying domains and the different refractive indices of the block segments, vivid structural colors can be observed in the bulk state. Structural colors of BCP films are investigated by angle-dependent UV/vis measurements, revealing intensive reflection colors according to Bragg's law of diffraction. The optical characteristics are directly correlated to TEM and SEM results. Moreover, colored BCP films featuring spherical domains for one block segment with domain sizes of 97-122 nm revealed blue structural colors stemming from disordered particle scattering.

Directed Assembly of Hybrid Nanomaterials and Nanocomposites

Hybrid nanomaterials are molecular or colloidal-level combinations of organic and inorganic materials, or otherwise strongly dissimilar materials. They are often, though not exclusively, anisotropic in shape. A canonical example is an inorganic nanorod or nanosheet sheathed in, or decorated by, a polymeric or other organic material, where both the inorganic and organic components are important for the properties of the system. Hybrid nanomaterials and nanocomposites have generated strong interest for a broad range of applications due to their functional properties. Generating macroscopic assemblies of hybrid nanomaterials and nanomaterials in nanocomposites with controlled orientation and placement by directed assembly is important for realizing such applications. Here, a survey of critical issues and themes in directed assembly of hybrid nanomaterials and nanocomposites is provided, highlighting recent efforts in this field with particular emphasis on scalable methods.

Photonic Resins: Designing Optical Appearance via Block Copolymer Self-Assembly

Despite a huge variety of methodologies having been proposed to produce photonic structures by self-assembly, the lack of an effective fabrication approach has hindered their practical uses. These approaches are typically limited by the poor control in both optical and mechanical properties. Here we report photonic thermosetting polymeric resins obtained through brush block copolymer (BBCP) self-assembly. We demonstrate that the control of the interplay between order and disorder in the obtained photonic structure offers a powerful tool box for designing the optical appearance of the polymer resins in terms of reflected wavelength and scattering properties. The obtained materials exhibit excellent mechanical properties with hardness up to 172 MPa and Young's modulus over 2.9 GPa, indicating great potential for practical uses as photonic coatings on a variety of surfaces.

Application of Bottlebrush Block Copolymers as Photonic Crystals

Brush block copolymers are a class of comb polymers that feature polymeric side chains densely grafted to a linear backbone. These polymers display interesting properties due to their dense functionality, low entanglement, and ability to rapidly self-assemble to highly ordered nanostructures. The ability to prepare brush polymers with precise structures has been enabled by advancements in controlled polymerization techniques. This Feature Article highlights the development of brush block copolymers as photonic crystals that can reflect visible to near-infrared wavelengths of light. Fabrication of these materials relies on polymer self-assembly processes to achieve nanoscale ordering, which allows for the rapid preparation of photonic crystals from common organic chemical feedstocks. The characteristic physical properties of brush block copolymers are discussed, along with methods for their preparation. Strategies to induce self-assembly at ambient temperatures and the use of blending techniques to tune photonic properties are emphasized.

Perfectly Ordered Patterns Formed by a Heterogeneous Nucleation Process of Block Copolymer Self-Assembly Under Rectangular Confinement

The heterogeneous nucleation process during the phase separation of binary blends of the AB diblock and the C homopolymer induced by rectangular confinement is studied by cell dynamics simulation based on the time-dependent Ginzburg-Landau theory. The main goal is to yield large-scale ordered hexagonal patterns by tailoring the surface potentials of the sidewalls. Our study reveals a crucial condition to induce the desired heterogeneous nucleation process in which the nucleated domain grains grow and merge into a defect-free pattern. Specifically, nucleations are induced simultaneously by two parallel sidewalls with a strong surface potential, whereas the spontaneous nucleation and the heterogeneous nucleation at the other two walls with a weak surface potential are suppressed. Moreover, the confinement effect of the other two walls can ensure that the two rows of nucleated domains have correlated positions. Importantly, we find that the ordering process under the crucial condition exhibits a high tolerance to the rectangular sizes. Only a few defects in thousands of domains are occasionally caused that are observed to be annihilated in a short-annealing time via various mechanisms. This study may provide a facile route to prepare large-scale ordered patterns via a simple rectangular confinement.