pH-sensitive cationic polymer gene delivery vehicle: N-Ac-poly(L-histidine)-graft-poly(L-lysine) comb shaped polymer

Biodegradable Polymeric Nanoparticles for Therapeutic Cancer Treatments

Polymeric nanoparticles have tremendous potential to improve the efficacy of therapeutic cancer treatments by facilitating targeted delivery to a desired site. The physical and chemical properties of polymers can be tuned to accomplish delivery across the multiple biological barriers required to reach diverse subsets of cells. The use of biodegradable polymers as nanocarriers is especially attractive, as these materials can be designed to break down in physiological conditions and engineered to exhibit triggered functionality when at a particular location or activated by an external source. We present how biodegradable polymers can be engineered as drug delivery systems to target the tumor microenvironment in multiple ways. These nanomedicines can target cancer cells directly, the blood vessels that supply the nutrients and oxygen that support tumor growth, and immune cells to promote anticancer immunotherapy.

Fabrication of cationic nanostructures from short self-assembling amphiphilic mixed α/β-pentapeptide: Potential candidates for drug delivery, gene delivery, and antimicrobial applications

The present article describes designing and fabrication of nanostructures from a mixed α/β-pentapeptide, Lys-βAla-βAla-Lys-βAla, which majorly contains non-natural β-alanine residues in the backbone with two α-lysine residues at 1- and 4-positions. The amphiphilic pentapeptide showed the ability to self-assemble into cationic nanovesicles in an aqueous solution. The average size of peptide nanostructures was found to be ~270 nm with a very high cationic charge of ~+40 mV. TEM micrographs revealed the average size of the same nanostructures ~80 nm bearing vesicular morphology. CD and FTIR spectroscopic studies on self-assembled pentapeptide hinted at random coil conformation which was also correlated with conformational search program using Hyper Chem 8.0. The pentapeptide nanostructures were then tested for encapsulation of hydrophobic model drug moieties, L-Dopa, and curcumin. Transfection efficiency of the generated cationic nanostructures was evaluated on HEK293 cells and compared the results with those obtained in the presence of chloroquine. The cytotoxicity assay performed using MTT depicted ~75-80% cell viability. The obtained nanostructures also gave positive results against both Gram-negative and Gram-positive bacterial strains. Altogether the results advocate the promising potential of the pentapeptide foldamer, H-Lys-βAla-βAla-Lys-βAla-OEt, for drug and gene delivery applications along with the antimicrobial activity.

Poly-histidine grafting leading to fishbone-like architectures

A small series of Morita–Baylis–Hillman derivatives was synthesized and made to react with N-acetylhexahistidine to give polymeric materials characterized by the presence of biadduct residues.

Mussel-inspired polydopamine-polyethylenimine conjugated nanoparticles as efficient gene delivery vectors for mammalian cells

Efficient delivery of DNA to cells is the primary concern to address the objective of gene therapy. Many attempts have been made to develop polymeric carriers for gene delivery. To have an efficient carrier, it is vital to understand the properties of the vector for better stability, transfection efficiency and minimal toxicity. Branched polyethylenimine (bPEI) has been considered as the 'gold standard' for gene delivery but suffers a major drawback of exhibiting high cytotoxicity. Here, we have attempted to develop a mussel-derived polymer, polydopamine (PDA), conjugated polyethylenimine nanoparticles in such a way that the toxic nature of bPEI is suppressed by the conversion of free primary amine groups to secondary and tertiary amines. Keeping the amount of PDA fixed, varying amounts of bPEIs of different molecular weights (25, 10 and 1.8kDa) were conjugated via Michael addition and/or Schiff base. A trend in hydrodynamic size of the conjugated nanoparticles was observed in the range from 160 to 300nm and zeta potential from +12-30mV in the projected three series, viz., (i) PDA₁-²⁵bPEI_0.5, PDA₁-²⁵bPEI₁, PDA₁-²⁵bPEI₂; (ii) PDA₁-¹⁰bPEI_0.5, PDA₁-¹⁰bPEI₁, PDA₁-¹⁰bPEI₂; and (iii) PDA₁-^1.8bPEI_0.5, PDA₁-^1.8bPEI₁, PDA₁-^1.8bPEI₂. A visible trend in the DNA condensation ability and buffering capacity was also noticed. Further, cell cytotoxicity assays revealed that pDNA complexes of PDA-bPEI nanoparticles were non-toxic to mammalian cells and these complexes exhibited several folds higher transfection efficiency than the complexes of native bPEIs as demonstrated by fluorescence measurements and flow cytometry. Altogether, the results advocate the promising potential of these conjugated nanoparticles for future in vivo applications.

pH/redox dual stimuli-responsive sheddable nanodaisies for efficient intracellular tumour-triggered drug delivery

A series of dual stimuli-responsive poly(l-histidine)_n-S-S-polyurethane-S-S-poly(l-histidine)_n [p(His)_n-SS-PU-SS-p(His)_n; n = 25, 35, 50, and 75] triblock copolymers that bear two pH-responsive p(His)_n end-blocks and PU middle-blocks tethered by a redox-responsive disulphide linker have been synthesized. The resulting triblock copolymers self-assemble to form micelles, nanodaisies (NDs), of uniform size (∼100 nm) and efficiently encapsulate the anticancer drug doxorubicin (Dox) with a high drug loading content (∼19%). The in vitro release profile shows an enhanced release of Dox in an acidic environment in the presence of 10 mM glutathione. The in vitro cell viability assays performed in various cell lines show that the NDs have no acute or intrinsic toxicity. Confocal microscopy images and flow cytometry results show the pH-responsive cellular uptake of Dox-loaded NDs, accelerated at pH ≤ 5.0. The tumour accumulation and in vivo bio-distribution studies of near-infrared dye (IR-820)-labeled NDs show higher tumour accumulation in CT26 tumour-bearing mice within 72 h. Furthermore, the Dox-loaded NDs effectively inhibit the CT26 tumours, suggesting that they are promising nanocarriers for cancer therapy.

Bulk and nanoscale polypeptide based polyelectrolyte complexes

Polyelectrolyte complexes (PECs) formed using polypeptides have great potential for developing new self-assembled materials, in particular for the development of drug and gene delivery vehicles. This review discusses the latest advancements in PECs formed using polypeptides as the polyanion and/or the polycation in both polyelectrolyte complexes that form bulk materials and block copolymer complexes that form nanoscale assemblies such as PEC micelles and other self-assembled structures. We highlight the importance of secondary structure formation between homogeneous polypeptide complexes, which, unlike PECs formed using other polymers, introduces additional intermolecular interactions in the form of hydrogen bonding, which may influence precipitation over coacervation. However, we still include heterogeneous complexes consisting of polypeptides and other polymers such as nucleic acids, sugars, and other synthetic polyelectrolytes. Special attention is given to complexes formed using nucleic acids as polyanions and polypeptides as polycations and their potential for delivery applications.

Smart polymers in drug delivery: a biological perspective

Key to the widespread application of smart polymers in drug delivery is understanding the mechanistic interplay, as well as consequence, of the presence of these macromolecules within living systems.

Inhaled gene delivery: a formulation and delivery approach

INTRODUCTION

Gene therapy is a potential alternative to treat a number of diseases. Different hurdles are associated with aerosol gene delivery due to the susceptibility of plasmid DNA (pDNA) structure to be degraded during the aerosolization process. Different strategies have been investigated in order to protect and efficiently deliver pDNA to the lungs using non-viral vectors. To date, no successful therapy involving non-viral vectors has been marketed, highlighting the need for further investigation in this field. Areas covered: This review is focused on the formulation and delivery of DNA to the lungs, using non-viral vectors. Aerosol gene formulations are divided according to the current delivery systems for the lung: nebulizers, dry powder inhalers and pressurized metered dose inhalers; highlighting its benefits, challenges and potential application. Expert opinion: Successful aerosol delivery is achieved when the supercoiled DNA structure is protected during aerosolization. A formulation strategy or compounds that can protect, stabilize and efficiently transfect DNA into the cells is desired in order to produce an effective, low-cost and safe formulation. Nebulizers and dry powder inhalers are the most promising approaches to be used for aerosol delivery, due to the lower shear forces involved. In this context it is also important to highlight the importance of considering the 'pDNA-formulation-device system' as an integral part of the formulation development for a successful nucleic acid delivery.

Physicochemical properties of polymers: An important system to overcome the cell barriers in gene transfection

Delivery of the macromolecules including DNA, miRNA, and antisense oligonucleotides is typically mediated by carriers due to the large size and negative charge. Different physical (e.g., gene gun or electroporation), and chemical (e.g., cationic polymer or lipid) vectors have been already used to improve the efficiency of gene transfer. Polymer-based DNA delivery systems have attracted special interest, in particular via intravenous injection with many intra- and extracellular barriers. The recent progress has shown that stimuli-responsive polymers entitled as multifunctional nucleic acid vehicles can act to target specific cells. These nonviral carriers are classified by the type of stimulus including reduction potential, pH, and temperature. Generally, the physicochemical characterization of DNA-polymer complexes is critical to enhance the transfection potency via protection of DNA from nuclease digestion, endosomal escape, and nuclear localization. The successful clinical applications will depend on an exact insight of barriers in gene delivery and development of carriers overcoming these barriers. Consequently, improvement of novel cationic polymers with low toxicity and effective for biomedical use has attracted a great attention in gene therapy. This article summarizes the main physicochemical and biological properties of polyplexes describing their gene transfection behavior, in vitro and in vivo. In this line, the relative efficiencies of various cationic polymers are compared.

NF-κB decoy polyplexes decrease P-glycoprotein-mediated multidrug resistance in colorectal cancer cells

Multidrug resistance (MDR), a major cause for chemotherapy failure, has been linked to upregulation of ATP-dependent membrane efflux systems that limit intracellular accumulation of cytotoxic anticancer agents. P-glycoprotein (P-gp) encoded by the human ABCB1 gene was the first efflux transporter identified to contribute to MDR. ABCB1 gene expression is correlated with constitutive activation of the NF-κB signaling pathway in tumor cells. The objective of this research is to modulate P-gp activity in colon cancer cells using NF-κB decoy oligodeoxynucleotides (ODNs) that are effectively delivered into the nucleus of colorectal cancer cells by self-assembling nonviral nanoparticles comprising the novel poly[N-(2-hydroxypropyl)methacrylamide]-poly(N,N-dimethylaminoethylmethacrylate) diblock copolymer (pHPMA-b-pDMAEMA). Ethidium bromide intercalation and gel retardation assays demonstrated high DNA condensation capacity of pHPMA-b-pDMAEMA. Nanoparticles prepared with and without decoy ODNs did not significantly compromise cellular safety at N/P ratios ⩽4. Transfection efficiency of pHPMA-b-pDMAEMA polyplexes (N/P=4) in Caco-2 cells was comparable to TurboFect transfection standard, resulting in a 98% reduction in P-gp protein levels. As a pharmacodynamic consequence, intracellular accumulation of the P-gp substrate Rhodamine123 significantly increased by almost twofold. In conclusion, NF-κB ODN polyplexes fabricated with pHPMA-b-pDMAEMA polymer effectively reduced P-gp-mediated efflux activity in Caco-2 cells, suggesting successful interference with NF-κB-binding sites in the promoter region of the ABCB1 gene.

Synthesis, characterization and evaluation of diglycidyl-1,2-cyclohexanedicarboxylate crosslinked polyethylenimine nanoparticles as efficient carriers of DNA

Crosslinked PEI nanoparticles were synthesized, which efficiently transported DNA inside the cells with minimal cytotoxicity.

Amino Acid Functional Polymers: Biomimetic Polymer Design Enabling Catalysis, Chiral Materials, and Drug Delivery

Amino acids are the natural building blocks for the world around us. Highly functional, these small molecules have unique catalytic properties, chirality, and biocompatibility. Imparting these properties to surfaces and other macromolecules is highly sought after and represents a fast-growing field. Polymers functionalized with amino acids in the side chains have tunable optical properties, pH responsiveness, biocompatibility, structure and self-assembly properties. Herein, we review the synthesis of amino acid functional polymers, discuss manipulation of available strategies to achieve the desired responsive materials, and summarize some exciting applications in catalysis, chiral particles, and drug delivery.

Poly(PEGA)-b-poly(L-lysine)-b-poly(L-histidine) Hybrid Vesicles for Tumoral pH-Triggered Intracellular Delivery of Doxorubicin Hydrochloride

A series of poly(ethylene glycol) methyl ether acrylate-block-poly(L-lysine)-block-poly(L-histidine) [p(PEGA)30-b-p(Lys)25-b-p(His)n] (n = 25, 50, 75, 100) triblock copolypeptides were designed and synthesized for tumoral pH-responsive intracellular release of anticancer drug doxorubicin hydrochloride (Dox). The tumoral acidic pH-responsive hybrid vesicles fabricated were stable at physiological pH 7.4 and could gradually destabilize in acidic pH as a result of pH-induced swelling of the p(His) block. The blank vesicles were nontoxic over a wide concentration range (0.01-100 μg/mL) in normal cell lines. The tumor acidic pH responsiveness of these vesicles was exploited for intracellular delivery of Dox. Vesicles efficiently encapsulated Dox, and pH-induced destabilization resulted in the controlled and sustained release of Dox in CT26 murine cancer cells, and dose-dependent cytotoxicity. The tumor-specific controlled release Dox from vesicles demonstrates this system represents a promising theranostic agent for tumor-targeted delivery.

Exploring the role of polymer structure on intracellular nucleic acid delivery via polymeric nanoparticles

Intracellular nucleic acid delivery has the potential to treat many genetically-based diseases, however, gene delivery safety and efficacy remains a challenging obstacle. One promising approach is the use of polymers to form polymeric nanoparticles with nucleic acids that have led to exciting advances in non-viral gene delivery. Understanding the successes and failures of gene delivery polymers and structures is the key to engineering optimal polymers for gene delivery in the future. This article discusses the polymer structural features that enable effective intracellular delivery of DNA and RNA, including protection of nucleic acid cargo, cellular uptake, endosomal escape, vector unpacking, and delivery to the intracellular site of activity. The chemical properties that aid in each step of intracellular nucleic acid delivery are described and specific structures of note are highlighted. Understanding the chemical design parameters of polymeric nucleic acid delivery nanoparticles is important to achieving the goal of safe and effective non-viral genetic nanomedicine.

Heterocyclic amine-modified polyethylenimine as gene carriers for transfection of mammalian cells

Branched polyethylenimine (PEI) is extensively used as a polycationic non-viral vector for gene delivery. Polyplexes formed with PEI are believed to be released from endocytotic vesicles by the osmotic burst mechanism in the rate-limiting step in transfection. Increasing the buffering capacity of PEI derivatives in the endosomal pH range of 4.5-7.5 should enhance transfection efficiency. In this study, PEI was derivatized by covalently attaching heterocyclic amine moieties (piperazine, pyridine and imidazole rings with pKa values from 5.23 to 6.04) through amide bonds. PEI derivatives with 50% of the primary amines on PEI exhibited increased buffering capacity, increased transfection activity and decreased cytotoxicity in murine neuroblastoma (Neuro-2a) cells. The relative effectiveness in enhancing transfection efficiency was piperazine>pyridine>histidine, but each type of amine was the most effective under a particular set of conditions. Modified vectors could significantly improve transfection efficiency in murine mesenchymal stem cells. PEI25 derivatized at 50% with histidine administered as polyplexes in the tail veins of mice resulted in remarkably enhanced luciferase gene expression in the expected organ distribution and much lower toxicity than underivatized PEI25.

Hypromellose-graft-chitosan and Its Polyelectrolyte Complex as Novel Systems for Sustained Drug Delivery

Polyelectrolyte complexes formed between chitosan (CS) and anionic polymers have attracted increasing interest in drug delivery. In this study, CS is copolymerized with hypromellose via a coupling reagent-mediated approach to form a water-soluble, nontoxic CS derivative, namely hypromellose-graft-CS (HC), which is subsequently complexed with carboxymethylcellulose (CMC) to generate a polyampholytic hydrogel. When compared with conventional CS, HC is highly water-soluble across a wide pH range, and has a substantially higher pH buffering capacity to provide a pH-stable environment for delivery of drugs. In addition, the polyelectrolyte complex of HC exhibits a drug encapsulation efficiency of over 90% in all drugs tested, which is 1-2 fold higher than the efficiency attainable by the polyelectrolyte complex of conventional CS, with a 2-3 fold longer duration of sustained drug release. Our results indicate that as a novel polymer, HC has excellent promise for future pharmaceutical applications.

Cationic dendronization of amylose via click chemistry for complexation and transfection of plasmid DNA

For the development of effective and safe gene carrier based on starch, the amylose from potato starch was azidized by reacting with 3-azidopropylamine in the presence of N, N'-carbonyldiimidazole and then conjugated with propargyl focal point poly(amidoamine) (PAMAM) dendrons by a Cu(I)-catalyzed azide-alkyne cycloaddition. Such a cationic dendronization was verified by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance analyses. For the resultant amylose conjugates with various contents and generations of PAMAM dendron, their buffering capacity, binding ability with plasmid DNA and in vitro cytotoxicity were investigated. These amylose conjugates were found to exhibit good buffering capacity and biocompatibility. In particular, they could condense effectively plasmid DNA into the nanocomplexes, as confirmed by agarose gel electrophoresis, zeta potential, and particle size analyses as well as transmission electron microscopy observation. For their nanocomplexes with plasmid DNA, the in vitro transfection properties in human embryonic kidney 293T cells were studied by fluorescence microscopy and flow cytometry. It was found that the transfection efficiency could be optimized by the dendronization extent of amylose and the complexation extent of dendronized amylose with plasmid DNA.

Grafting chitosan with polyethylenimine in an ionic liquid for efficient gene delivery

Modifying chitosan (CS) with polyethylenimine (PEI) grafts is an effective way to improve its gene transfection performance. However, it is still a challenge to conduct the grafting with fine control and high efficiency, particularly for the modification of water-insoluble CS. Herein, a novel method to graft CS with PEI (1.8 kDa, PEI-1.8) was developed by using ionic liquid 1-butyl-3-methyl imidazolium acetate ([BMIM]Ac) as a reaction solvent, water-insoluble CS as a reaction substrate and 1,1-carbonyldiimidazole (CDI) as a linking agent. The grafting reaction was greatly accelerated and the reaction time was largely shortened to 4 h by taking advantages of the good solubility of CS, the enhanced nucleophilicity of amino groups and the preferential stability of the activated complexes in the ionic liquid. The chitosan-graft-polyethylenimine (CS-g-PEI) products were characterized by 1H NMR, FTIR and GPC. PEI-1.8 was quantitatively grafted to CS through urea linkages, and the grafting degree (GD) was conveniently tuned by varying the molar ratios of PEI-1.8 to D-glucosamine units of CS in the range of 9.0 × 10(-3) to 9.0 × 10(-2). Compared with CS, the synthesized CS-g-PEI copolymers showed higher pDNA-binding affinity, which increased with the GD as shown in Agarose gel electrophoresis. The dynamic light scattering (DLS) experiment demonstrated that the CS-g-PEI/pDNA polyplexes had suitable particle sizes and proper ζ-potentials for cell transfection. The CS-g-PEI copolymer with a medium GD of 4.5% conferred the best gene transfection, with the efficiency 44 times of CS and 38 times of PEI-1.8 in HEp-2 cells. The cytotoxicity of CS-g-PEI was tested and found nearly as low as that of CS and much lower than that of PEI.

Trigger responsive polymeric nanocarriers for cancer therapy

Conventional chemotherapy for the treatment of cancer has limited specificity when administered systemically and is often associated with toxicity issues. Enhanced accumulation of polymeric nanocarriers at a tumor site may be achieved by passive and active targeting. Incorporation of trigger responsiveness into these polymeric nanocarriers improves the anticancer efficacy of such systems by modulating the release of the drug according to the tumor environment. Triggers used for tumor targeting include internal triggers such as pH, redox and enzymes and external triggers such as temperature, magnetic field, ultrasound and light. While internal triggers are specific cues of the tumor microenvironment, external triggers are those which are applied externally to control the release. This review highlights the various strategies employed for the preparation of such trigger responsive polymeric nanocarriers for cancer therapy and provides an overview of the state of the art in this field.

Surface modification and endothelialization of biomaterials as potential scaffolds for vascular tissue engineering applications

This review highlights the recent developments of surface modification and endothelialization of biomaterials in vascular tissue engineering applications.

Novel dendritic derivatives of unsaturated fatty acids as promising transdermal permeation enhancers for tenofovir

Novel dendritic ester derivatives of unsaturated fatty acids as potential transdermal permeation enhancers.

The influence of polymer architecture on in vitro pDNA transfection

In the field of polymer-based gene delivery, the tuning potential of polymers by using different architectures like graft- and star-shaped polymers as well as self-assembled block copolymers is immense. In the last years numerous new polymer designs showed enhanced transfections properties in combination with a good biocompatibility.

Combinatorial targeting polymeric micelles for anti-tumor drug delivery

Polymeric micelles with combinatorial targeting ability for cancer cells was achieved by co-assembly of cRGD-PEO-b-PCL and tumor pH_esensitive PEG-DOX.

Ligand–metal-drug coordination based micelles for efficient intracellular doxorubicin delivery

A ligand–metal-drug coordination architecture is exploited to construct polymeric micelles with the high efficient loading and pH-triggered release of anticancer drug.

Quantification of cytosolic plasmid DNA degradation using high-throughput sequencing: implications for gene delivery

BACKGROUND

Although cytosolic DNA degradation plays an important role in decreasing transgene expression, the plasmid degradation pattern remains largely unexplored.

METHODS

Illumina dye sequencing was employed to provide degradation site information for S1 and cytosolic nucleases. S1 nuclease provided a positive control for a comparison between the agarose gel method and sequencing approaches.

RESULTS

The poly(A) region between the β-lactamase gene and the cytomegalovirus (CMV) promoter was identified as the most likely cut site for polyplex-treated cytosol. The second most likely site, at the 5' end of the β-lactamase gene, was identified by gel electrophoresis and sequencing. Additional sites were detected in the OriC region, the SV40/poly(A) region, the luciferase gene and the CMV promoter. Sequence analysis of plasmid treated with cytosol from control cells showed the greatest cut activity in the OriC region, the β-lactamase gene and the poly(A) region following the luciferase gene. Additional regions of cut activity include the SV40 promoter and the β-lactamase poly(A) termination sequence. Both cytosolic nucleases and the S1 nuclease showed substantial activity at the bacterial origin of replication (OriC).

CONCLUSIONS

High-throughput plasmid sequencing revealed regions of the luciferase plasmid DNA sequence that are sensitive to cytosolic nuclease degradation. This provides new targets for improving plasmid and/or polymer design to optimize the likelihood of protein expression.

Exploring advantages/disadvantages and improvements in overcoming gene delivery barriers of amino acid modified trimethylated chitosan

PURPOSE

Present study aimed at exploring advantages/disadvantages of amino acid modified trimethylated chitosan in conquering multiple gene delivery obstacles and thus providing comprehensive understandings for improved transfection efficiency.

METHODS

Arginine, cysteine, and histidine modified trimethyl chitosan were synthesized and employed to self-assemble with plasmid DNA (pDNA) to form nanocomplexes, namely TRNC, TCNC, and THNC, respectively. They were assessed by structural stability, cellular uptake, endosomal escape, release behavior, nuclear localization, and in vitro and in vivo transfection efficiencies. Besides, sodium tripolyphosphate (TPP) was added into TRNC to compromise certain disadvantageous attributes for pDNA delivery.

RESULTS

Optimal endosomal escape ability failed to bring in satisfactory transfection efficiency of THNC due to drawbacks in structural stability, cellular uptake, pDNA liberation, and nuclear distribution. TCNC evoked the most potent gene expression owing to multiple advantages including sufficient stability, preferable uptake, efficient pDNA release, and high nucleic accumulation. Undesirable stability and insufficient pDNA release adversely affected TRNC-mediated gene transfer. However, incorporation of TPP could improve such disadvantages and consequently resulted in enhanced transfection efficiencies.

CONCLUSIONS

Coordination of multiple contributing effects to conquer all delivery obstacles was necessitated for improved transfection efficiency, which would provide insights into rational design of gene delivery vehicles.

Cationic Polysaccharides in Gene Delivery

Approval of Glybera®, a gene therapy to treat lipoprotein lipase deficiency, by the European Union Marketing Authorization, and more than 1800 clinical trials in over 31 countries for the treatment of many incurable diseases, narrates the successful journey of gene therapy in the biomedical field. However, the undesired side effects of gene therapy using viral and other vectors have overshadowed the success story of gene therapy. Non-viral vectors, and more particularly cationic polysaccharides due to their non-toxicity, water solubility, biodegradability and excellent compatibility with body systems, provide an excellent alternative for gene delivery. This chapter highlights significant contributions made by cationic polysaccharides in gene delivery.

Suppression of VEGF by reversible-PEGylated histidylated polylysine in cancer therapy

A reversible-PEGylated polylysine is designed and developed for efficient delivery of siRNA. In this unique structure, the ε-amino groups of disulfide linked poly(ethylene glycol) (PEG) and polylysine (mPEG-SS-PLL) are partially replaced by histidine groups, in order to develop the histidylated reversible-PEGylated polylysine (mPEG-SS-PLH), for enhanced endosome escape ability. The transfection efficacy of mPEG-SS-PLH is found to closely correlate with histidine substitution. Its maximum transfection efficiencies are determined, respectively, to be 75%, 42%, and 24%, against 293T, MCF-7, and PC-3 cells. These data indicate that the transfection efficiencies can equal or even outweigh PEI-25k in the corresponding cells (80%, 38.5%, and 20%). The in vivo circulation and biodistribution of the polyplexes are monitored by fluorescent imaging. The in vivo gene transfection is carried out by intravenous injection of pEGFP to BALB/c mice using the xenograft models. The in vivo experimental results show effective inhibition of tumor growth by mPEG-SS-PLH/siRNA-VEGF, indicating its high potential for clinical applications.

pH-responsive nano carriers for doxorubicin delivery

PURPOSE

The aim of this study was to design stimuli-responsive nanocarriers for anti-cancer drug delivery. For this purpose, doxorubicin (DOX)-loaded, polysebacic anhydride (PSA) based nanocapsules (NC) were combined with pH-sensitive poly (L-histidine) (PLH).

METHOD

PSA nano-carriers were first loaded with DOX and were coated with poly L-histidine to introduce pH sensitivity. The PLH-coated NCs were then covered with polyethylene glycol (PEG) to reduce macrophage uptake. The drug release profile from this system was examined in two different buffer solutions prepared as acidic (pH5) and physiological (pH 7.4) media. The physical and chemical properties of the nanocapsules were characterized by Fourier transform infrared spectroscopy (FTIR), dynamic light scattering (DLS), ultraviolet and visible absorption spectroscopy (UV-VIS), and scanning electron microscopy (SEM). In vitro studies of the prepared nanocapsules were conducted in MDA-MB-231 breast cancer cells.

RESULTS

The results obtained by SEM and DLS revealed that nanocapsules have spherical morphology with an average size of 230 nm. Prepared pH sensitive nanocapsules exhibited pH-dependent drug release profile and promising intracellular release of drug. PEGylation of nanoparticles significantly prevented macrophage uptake compared to non-PEGylated particles.

Peptides used in the delivery of small noncoding RNA

RNA interference (RNAi) is an endogenous process in which small noncoding RNAs, including small interfering RNAs (siRNAs) and microRNAs (miRNAs), post-transcriptionally regulate gene expressions. In general, siRNA and miRNA/miRNA mimics are similar in nature and activity except their origin and specificity. Although both siRNAs and miRNAs have been extensively studied as novel therapeutics for a wide range of diseases, the large molecular weight, anionic surface charges, instability in blood circulation, and intracellular trafficking to the RISC after cellular uptake have hindered the translation of these RNAs from bench to clinic. As a result, a great variety of delivery systems have been investigated for safe and effective delivery of small noncoding RNAs. Among these systems, peptides, especially cationic peptides, have emerged as a promising type of carrier due to their inherent ability to condense negatively charged RNAs, ease of synthesis, controllable size, and tunable structure. In this review, we will focus on three major types of cationic peptides, including poly(l-lysine) (PLL), protamine, and cell penetrating peptides (CPP), as well as peptide targeting ligands that have been extensively used in RNA delivery. The delivery strategies, applications, and limitations of these cationic peptides in siRNA/miRNA delivery will be discussed.