Interaction of polysaccharides with the N-terminal cellulose-binding domain of Cellulomonas fimi CenC. 1. Binding specificity and calorimetric analysis

A two-component system regulates the expression of an ABC transporter for xylo-oligosaccharides in Geobacillus stearothermophilus

Geobacillus stearothermophilus T-6 utilizes an extensive and highly regulated hemicellulolytic system. The genes comprising the xylanolytic system are clustered in a 39.7-kb chromosomal segment. This segment contains a 6-kb transcriptional unit (xynDCEFG) coding for a potential two-component system (xynDC) and an ATP-binding cassette (ABC) transport system (xynEFG). The xynD promoter region contains a 16-bp inverted repeat resembling the operator site for the xylose repressor, XylR. XylR was found to bind specifically to this sequence, and binding was efficiently prevented in vitro in the presence of xylose. The ABC transport system was shown to comprise an operon of three genes (xynEFG) that is transcribed from its own promoter. The nonphosphorylated fused response regulator, His6-XynC, bound to a 220-bp fragment corresponding to the xynE operator. DNase I footprinting analysis showed four protected zones that cover the -53 and the +34 regions and revealed direct repeat sequences of a GAAA-like motif. In vitro transcriptional assays and quantitative reverse transcription-PCR demonstrated that xynE transcription is activated 140-fold in the presence of 1.5 microM XynC. The His6-tagged sugar-binding lipoprotein (XynE) of the ABC transporter interacted with different xylosaccharides, as demonstrated by isothermal titration calorimetry. The change in the heat capacity of binding (DeltaCp) for XynE with xylotriose suggests a stacking interaction in the binding site that can be provided by a single Trp residue and a sugar moiety. Taken together, our data show that XynEFG constitutes an ABC transport system for xylo-oligosaccharides and that its transcription is negatively regulated by XylR and activated by the response regulator XynC, which is part of a two-component sensing system.

Understanding the biological rationale for the diversity of cellulose-directed carbohydrate-binding modules in prokaryotic enzymes

Plant cell walls are degraded by glycoside hydrolases that often contain noncatalytic carbohydrate-binding modules (CBMs), which potentiate degradation. There are currently 11 sequence-based cellulose-directed CBM families; however, the biological significance of the structural diversity displayed by these protein modules is uncertain. Here we interrogate the capacity of eight cellulose-binding CBMs to bind to cell walls. These modules target crystalline cellulose (type A) and are located in families 1, 2a, 3a, and 10 (CBM1, CBM2a, CBM3a, and CBM10, respectively); internal regions of amorphous cellulose (type B; CBM4-1, CBM17, CBM28); and the ends of cellulose chains (type C; CBM9-2). Type A CBMs bound particularly effectively to secondary cell walls, although they also recognized primary cell walls. Type A CBM2a and CBM10, derived from the same enzyme, displayed differential binding to cell walls depending upon cell type, tissue, and taxon of origin. Type B CBMs and the type C CBM displayed much weaker binding to cell walls than type A CBMs. CBM17 bound more extensively to cell walls than CBM4-1, even though these type B modules display similar binding to amorphous cellulose in vitro. The thickened primary cell walls of celery collenchyma showed significant binding by some type B modules, indicating that in these walls the cellulose chains do not form highly ordered crystalline structures. Pectate lyase treatment of sections resulted in an increased binding of cellulose-directed CBMs, demonstrating that decloaking cellulose microfibrils of pectic polymers can increase CBM access. The differential recognition of cell walls of diverse origin provides a biological rationale for the diversity of cellulose-directed CBMs that occur in cell wall hydrolases and conversely reveals the variety of cellulose microstructures in primary and secondary cell walls.

An olive pollen protein with allergenic activity, Ole e 10, defines a novel family of carbohydrate-binding modules and is potentially implicated in pollen germination

CBMs (carbohydrate-binding modules) are the most common non-catalytic modules associated with enzymes active in plant cell-wall hydrolysis. They have been frequently identified by amino acid sequence alignments, but only a few have been experimentally established to have a carbohydrate-binding activity. A small olive pollen protein, Ole e 10 (10 kDa), has been described as a major inducer of type I allergy in humans. In the present study, the ability of Ole e 10 to bind several polysaccharides has been analysed by affinity gel electrophoresis, which demonstrated that the protein bound 1,3-beta-glucans preferentially. Analytical ultracentrifugation studies confirmed binding to laminarin, at a protein/ligand ratio of 1:1. The interaction of Ole e 10 with laminarin induced a conformational change in the protein, as detected by CD and fluorescence analyses, and an increase of 3.6 degrees C in the thermal denaturation temperature of Ole e 10 in the presence of the glycan. These results, and the absence of alignment of the sequence of Ole e 10 with that of any classified CBM, indicate that this pollen protein defines a novel family of CBMs, which we propose to name CBM43. Immunolocalization of Ole e 10 in mature and germinating pollen by transmission electron microscopy and confocal laser scanning microscopy demonstrated the co-localization of Ole e 10 and callose (1,3-beta-glucan) in the growing pollen tube, suggesting a role for this protein in the metabolism of carbohydrates and in pollen tube wall re-formation during germination.

The interaction of carbohydrate-binding modules with insoluble non-crystalline cellulose is enthalpically driven

Natural cellulose exists as a composite of cellulose forms, which can be broadly characterized as crystalline or non-crystalline. The recognition of both of these forms of cellulose by the CBMs (carbohydrate-binding modules) of microbial glycoside hydrolases is important for the efficient natural and biotechnological conversion of cellulosic biomass. The category of CBM that binds insoluble non-crystalline cellulose does so with an affinity approx. 10-20-fold greater than their affinity for cello-oligosaccharides and/or soluble polysaccharides. This phenomenon has been assumed to originate from the effects of changes in configurational entropy upon binding. The loss of configurational entropy is thought to be less profound upon binding to conformationally restrained insoluble non-crystalline cellulose, resulting in larger free energies of binding. However, using isothermal titration calorimetry, it is shown that this is not the case for the high-affinity interactions of CcCBM17 (the family 17 CBM from EngF of Clostridium cellulovorans) and BspCBM28 (the family 28 CBM from Cel5A of Bacillus species 1139) with regenerated cellulose, an insoluble preparation of primarily non-crystalline cellulose. The enhanced free energy of binding of non-crystalline cellulose relative to cello-oligosaccharides is by virtue of improved enthalpy, not entropy.

High-resolution crystal structures of Caldicellulosiruptor strain Rt8B.4 carbohydrate-binding module CBM27-1 and its complex with mannohexaose

Carbohydrate-binding modules (CBMs) are the most common non-catalytic modules associated with enzymes active in plant cell-wall hydrolysis. Despite the large number of putative CBMs being identified by amino acid sequence alignments, only few representatives have been experimentally shown to have a carbohydrate-binding function. Caldicellulosiruptor strain Rt8B.4 Man26 is a thermostable modular glycoside hydrolase beta-mannanase which contains two non-catalytic modules in tandem at its N terminus. These modules were recently shown to function primarily as beta-mannan-binding modules and have accordingly been classified as members of a novel family of CBMs, family 27. The N-terminal CBM27 (CsCBM27-1) of Man26 from Caldicellulosiruptor Rt8B.4 displays high-binding affinity towards mannohexaose with a Ka of 1 x 10(7) M(-1). Accordingly, the high-resolution crystal structures of CsCBM27-1 native and its mannohexaose complex were solved at 1.55 angstroms and 1.06 angstoms resolution, respectively. In the crystal, CsCBM27-1 shows the typical beta-sandwich jellyroll fold observed in other CBMs with a single metal ion bound, which was identified as calcium. The crystal structures reveal that the overall fold of CsCBM27-1 remains virtually unchanged upon sugar binding and that binding is mediated by three solvent-exposed tryptophan residues and few direct hydrogen bonds. Based on binding affinity and thermal unfolding experiments this structural calcium is shown to play a role in the thermal stability of CsCBM27-1 at high temperatures. The higher binding affinity of CsCBM27-1 to mannooligosaccharides when compared to other members of CBM family 27 might be explained by the different orientation of the residues forming the "aromatic platform" and by differences in the length of loops. Finally, evidence is presented, on the basis of fold similarities and the retention of the position of conserved motifs and a calcium ion, for the consolidation of related CBM families into a superfamily of CBMs.

Mapping glycoside hydrolase substrate subsites by isothermal titration calorimetry

Relating thermodynamic parameters to structural and biochemical data allows a better understanding of substrate binding and its contribution to catalysis. The analysis of the binding of carbohydrates to proteins or enzymes is a special challenge because of the multiple interactions and forces involved. Isothermal titration calorimetry (ITC) provides a direct measure of binding enthalpy (DeltaHa) and allows the determination of the binding constant (free energy), entropy, and stoichiometry. In this study, we used ITC to elucidate the binding thermodynamics of xylosaccharides for two xylanases of family 10 isolated from Geobacillus stearothermophilus T-6. The change in the heat capacity of binding (DeltaCp = DeltaH/DeltaT) for xylosaccharides differing in one sugar unit was determined by using ITC measurements at different temperatures. Because hydrophobic stacking interactions are associated with negative DeltaCp, the data allow us to predict the substrate binding preference in the binding subsites based on the crystal structure of the enzyme. The proposed positional binding preference was consistent with mutants lacking aromatic binding residues at different subsites and was also supported by tryptophan fluorescence analysis.

Ab Initio Structure Determination and Functional Characterization Of CBM36

The enzymatic degradation of polysaccharides harnesses multimodular enzymes whose carbohydrate binding modules (CBM) target the catalytic domain onto the recalcitrant substrate. Here we report the ab initio structure determination and subsequent refinement, at 0.8 A resolution, of the CBM36 domain of the Paenibacillus polymyxa xylanase 43A. Affinity electrophoresis, isothermal titration calorimetry, and UV difference spectroscopy demonstrate that CBM36 is a novel Ca(2+)-dependent xylan binding domain. The 3D structure of CBM36 in complex with xylotriose and Ca(2+), at 1.5 A resolution, displays significant conformational changes compared to the native structure and reveals the molecular basis for its unique Ca(2+)-dependent binding of xylooligosaccharides through coordination of the O2 and O3 hydroxyls. CBM36 is one of an emerging spectrum of carbohydrate binding modules that increasingly find applications in industry and display great potential for mapping the "glyco-architecture" of plant cells.

Binding Sub-site Dissection of a Carbohydrate-binding Module Reveals the Contribution of Entropy to Oligosaccharide Recognition at “Non-primary” Binding Subsites

The optimal ligands for many carbohydrate-binding proteins are often oligosaccharides comprising two, three, or more monosaccharide units. The binding affinity for these sugars is increased incrementally by contributions from binding subsites on the protein that accommodate the individual monosaccharide residues of the oligosaccharide. Here, we use CsCBM6-1, a xylan-specific type B carbohydrate-binding module (CBM) from Clostridium stercorarium falling into amino acid sequence family CBM6, as a model system to investigate the structural and thermodynamic contributions of binding subsites in this protein to carbohydrate recognition. The three-dimensional structures of uncomplexed CsCBM6-1 (at 1.8 A resolution) and bound to the oligosaccharides xylobiose, xylotriose, and xylotetraose (at 1.70 A, 1.89 A, and 1.69 A resolution, respectively) revealed the sequential occupation of four subsites within the binding site in the order of subsites 2, 3, 4 then 1. Overall, binding to all of the xylooligosaccharides tested was enthalpically favourable and entropically unfavourable, like most protein-carbohydrate interactions, with the primary subsites 2 and 3 providing the bulk of the free energy and enthalpy of binding. In contrast, the contributions to the changes in entropy of the non-primary subsites 1 and 4 to xylotriose and xylotetraose binding, respectively, were positive. This observation is remarkable, in that it shows that the 10-20-fold improvement in association constants for oligosaccharides longer than a disaccharide is facilitated by favourable entropic contributions from the non-primary binding subsites.

Reduction of starch granule size by expression of an engineered tandem starch-binding domain in potato plants

Granule size is an important parameter when using starch in industrial applications. An artificial tandem repeat of a family 20 starch-binding domain (SBD2) was engineered by two copies of the SBD derived from Bacillus circulans cyclodextrin glycosyltransferase via the Pro-Thr-rich linker peptide from Xyn10A from Cellulomonas fimi. SBD2 and a single SBD were introduced into the amylose-free potato mutant, amf, using appropriate signal sequences. The accumulation of SBD2 into transgenic starch granules was much higher than that of SBD. In a number of transformants, particularly amfSS3, the starch granules were much smaller than in control plants. The amfSS3 mean granule size was 7.8 microm, compared with 15.2 microm in the control, whereas other starch properties were unaltered. This new starch combines the advantage of the high purity of potato starch with that of the small granule size of other crop species, such as cassava, taro and wheat. This starch may find application in the manufacture of biodegradable plastic films. Both genes were also expressed in Escherichia coli and the affinity for soluble starch of the purified recombinant proteins was determined. SBD2 had an approximately 10-fold higher affinity for starch than SBD, indicating that the two appended SBDs act in synergy when binding to their target polysaccharide ligand.

The crystal structure of the family 6 carbohydrate binding module from Cellvibrio mixtus endoglucanase 5a in complex with oligosaccharides reveals two distinct binding sites with different ligand specificities

Glycoside hydrolases that release fixed carbon from the plant cell wall are of considerable biological and industrial importance. These hydrolases contain non-catalytic carbohydrate binding modules (CBMs) that, by bringing the appended catalytic domain into intimate association with its insoluble substrate, greatly potentiate catalysis. Family 6 CBMs (CBM6) are highly unusual because they contain two distinct clefts (cleft A and cleft B) that potentially can function as binding sites. Henshaw et al. (Henshaw, J., Bolam, D. N., Pires, V. M. R., Czjzek, M., Henrissat, B., Ferreira, L. M. A., Fontes, C. M. G. A., and Gilbert, H. J. (2003) J. Biol. Chem. 279, 21552-21559) show that CmCBM6 contains two binding sites that display both similarities and differences in their ligand specificity. Here we report the crystal structure of CmCBM6 in complex with a variety of ligands that reveals the structural basis for the ligand specificity displayed by this protein. In cleft A the two faces of the terminal sugars of beta-linked oligosaccharides stack against Trp-92 and Tyr-33, whereas the rest of the binding cleft is blocked by Glu-20 and Thr-23, residues that are not present in CBM6 proteins that bind to the internal regions of polysaccharides in cleft A. Cleft B is solvent-exposed and, therefore, able to bind ligands because the loop, which occludes this region in other CBM6 proteins, is much shorter and flexible (lacks a conserved proline) in CmCBM6. Subsites 2 and 3 of cleft B accommodate cellobiose (Glc-beta-1,4-Glc), subsite 4 will bind only to a beta-1,3-linked glucose, whereas subsite 1 can interact with either a beta-1,3- or beta-1,4-linked glucose. These different specificities of the subsites explain how cleft B can accommodate beta-1,4-beta-1,3- or beta-1,3-beta-1,4-linked gluco-configured ligands.

Rapid chromatography for evaluating adsorption characteristics of cellulase binding domain mimetics

The cost of cellulolytic enzymes is one barrier to the economic production of fermentable sugars from lignocellulosic biomass for the production of fuels and chemicals. One functional characteristic of cellulolytic enzymes that improves reaction kinetics over mineral acids is a cellulose binding domain that concentrates the catalytic domain to the substrate surface. We have identified maleic acid as an attractive catalytic domain with pK(a) and dicarboxylic acid structure properties that hydrolyze cellulose while producing minimal degradation of the glucose formed. In this study we report results of a rapid chromatographic method to assess the binding characteristics of potential cellulose binding domains for the construction of a synthetic cellulase over a wide range of temperatures (20 degrees to 120 degrees C). Aromatic, planar chemical structures appear to be key indicators of cellulose adsorption. Indole, the side-chain of the amino acid tryptophan, has been shown to reversibly adsorb to cellulose at temperatures between 30 degrees and 120 degrees C. Trypan blue, a polyaromatic, planar molecule, was shown to be irreversibly adsorbed to cotton cellulose at temperatures of <120 degrees C on the time scale of the experiments. These results confirm the importance of hydrophobic cellulose and the cellulose-binding component of cellulolytic enzymes and cellulolytic enzyme mimetics.

Recognition and hydrolysis of noncrystalline cellulose

Cellulase Cel5A from alkalophilic Bacillus sp. 1139 contains a family 17 carbohydrate-binding module (BspCBM17) and a family 28 CBM (BspCBM28) in tandem. The two modules have significantly similar amino acid sequences, but amino acid residues essential for binding are not conserved. BspCBM28 was obtained as a discrete polypeptide by engineering the cel5A gene. BspCBM17 could not be obtained as a discrete polypeptide, so a family 17 CBM from endoglucanase Cel5A of Clostridium cellulovorans, CcCBM17, was used to compare the binding characteristics of the two families of CBM. Both CcCBM17 and BspCBM28 recognized two classes of binding sites on amorphous cellulose: a high affinity site (K(a) approximately 1 x 10(6) M(-1)) and a low affinity site (K(a) approximately 2 x 10(4) M(-1)). They did not compete for binding to the high affinity sites, suggesting that they bound at different sites on the cellulose. A polypeptide, BspCBM17/CBM28, comprising the tandem CBMs from Cel5A, bound to amorphous cellulose with a significantly higher affinity than the sum of the affinities of CcCBM17 and BspCBM28, indicating cooperativity between the linked CBMs. Cel5A mutants were constructed that were defective in one or both of the CBMs. The mutants differed from the wild-type enzyme in the amounts and sizes of the soluble products produced from amorphous cellulose. This suggests that either the CBMs can modify the action of the catalytic module of Cel5A or that they target the enzyme to areas of the cellulose that differ in susceptibility to hydrolysis.

Carbohydrate-binding modules recognize fine substructures of cellulose

Competition isotherms are used to identify the set of cellulose substructures to which cellulose binding modules (CBMs) from families 2a, 3, 4, 9, and 17 bind. The experiments are based on coupling a unique fluorescent tag to each CBM in a manner that does not alter the natural binding properties of the CBM and therefore allows the surface and solution concentrations of each CBM to be monitored as a function of time and composition. Adsorption and surface exchange of like or competing CBMs are monitored using a range of cellulose preparations varying in both crystallinity and provenance. CBMs from families 2a, 3, 4, 9, and 17 are shown to recognize different physical forms of prepared cellulose. The demonstration of the very fine binding specificity of cellulose-specific CBMs implies that the polysaccharide targets of CBMs extend down to the resolution of cellulose microstructures.

Cellulose-binding domains

Many researchers have acknowledged the fact that there exists an immense potential for the application of the cellulose-binding domains (CBDs) in the field of biotechnology. This becomes apparent when the phrase "cellulose-binding domain" is used as the key word for a computerized patent search; more then 150 hits are retrieved. Cellulose is an ideal matrix for large-scale affinity purification procedures. This chemically inert matrix has excellent physical properties as well as low affinity for nonspecific protein binding. It is available in a diverse range of forms and sizes, is pharmaceutically safe, and relatively inexpensive. Present studies into the application of CBDs in industry have established that they can be applied in the modification of physical and chemical properties of composite materials and the development of modified materials with improved properties. In agro-biotechnology, CBDs can be used to modify polysaccharide materials both in vivo and in vitro. The CBDs exert nonhydrolytic fiber disruption on cellulose-containing materials. The potential applications of "CBD technology" range from modulating the architecture of individual cells to the modification of an entire organism. Expressing these genes under specific promoters and using appropriate trafficking signals, can be used to alter the nutritional value and texture of agricultural crops and their final products.

Differential oligosaccharide recognition by evolutionarily-related beta-1,4 and beta-1,3 glucan-binding modules

Enzymes active on complex carbohydrate polymers frequently have modular structures in which a catalytic domain is appended to one or more carbohydrate-binding modules (CBMs). Although CBMs have been classified into a number of families based upon sequence, many closely related CBMs are specific for different polysaccharides. In order to provide a structural rationale for the recognition of different polysaccharides by CBMs displaying a conserved fold, we have studied the thermodynamics of binding and three-dimensional structures of the related family 4 CBMs from Cellulomonas fimi Cel9B and Thermotoga maritima Lam16A in complex with their ligands, beta-1,4 and beta-1,3 linked gluco-oligosaccharides, respectively. These two CBMs use a structurally conserved constellation of aromatic and polar amino acid side-chains that interact with sugars in two of the five binding subsites. Differences in the length and conformation of loops in non-conserved regions create binding-site topographies that complement the known solution conformations of their respective ligands. Thermodynamics interpreted in the light of structural information highlights the differential role of water in the interaction of these CBMs with their respective oligosaccharide ligands.

Modification of polysaccharides and plant cell wall by endo-1,4-beta-glucanase and cellulose-binding domains

Cellulose is one of the most abundant polymers in nature. Different living systems evolved simultaneously, using structurally similar proteins to synthesize and metabolize polysaccharides. In the growing plant, cell wall loosening, together with cellulose biosynthesis, enables turgor-driven cell expansion. It has been postulated that endo-1,4-beta-glucanases (EGases) play a central role in these complex activities. Similarly, microorganisms use a consortium of lytic enzymes to convert cellulose into soluble sugars. Most, if not all, cellulases have a modular structure with two or more separate independent functional domains. Binding to cellulose is mediated by a cellulose-binding domain (CBD), whereas the catalytic domain mediates hydrolysis. Today, EGases and CBDs are known to exist in a wide range of species and it is evident that both possess immense potential in modifying polysaccharide materials in-vivo and in-vitro. The hydrolytic function is utilized for polysaccharide degradation in microbial systems and cell wall biogenesis in plants. The CBDs exerts activity that can be utilized for effective degradation of crystalline cellulose, plant cell wall relaxation, expansion and cell wall biosynthesis. Applications range from modulating the architecture of individual cells to an entire organism. These genes, when expressed under specific promoters and appropriate trafficking signals can be used to alter the nutritional value and texture of agricultural crop and their final products. EGases and CBDs may also find applications in the modification of physical and chemical properties of composite materials to create new materials possessing improved properties.

Isolation and biochemical characterization of an endo-1,3-beta-glucanase from Streptomyces sioyaensis containing a C-terminal family 6 carbohydrate-binding module that binds to 1,3-beta-glucan

A gene encoding 1,3-beta-glucanase was isolated from Streptomyces sioyaensis based on an activity plate assay. Analysis of the deduced amino acid sequence of the gene revealed that the matured 1,3-beta-glucanase has two functional domains separated by a stretch of nine glycine residues. The N-terminal domain shares sequence similarity with bacterial endo-1,3-beta-glucanases classified in glycosyl hydrolase family 16 (GHF 16), while the C-terminal domain is a putative carbohydrate-binding module (CBM) grouped into CBM family 6. To characterize the function of each domain, both the full-length and the CBM-truncated versions of the protein were expressed in Escherichia coli and purified to homogeneity. Biochemical data suggest that the glycosyl hydrolase domain preferentially catalyses the hydrolysis of glucans with 1,3-beta linkage, and has an endolytic mode of action. Binding assay indicated that the C-terminal CBM binds to various insoluble beta-glucans (1,3-, 1,3-1,4- and 1,4- linkages) but not to xylan, a primary binding target for most members of CBM family 6. The full-length and the CBM-truncated proteins had similar specific activity (units per mol of hydrolase domain) on soluble 1,3-beta-glucan, whereas the former had much stronger specific activity on insoluble 1,3-beta-glucans, suggesting that the C-terminal CBM enhances the activity of the S. sioyaensis 1,3-beta-glucanase against insoluble substrates, presumably by increasing the frequency of encounter events between the hydrolase domain and the substrate.

Co-operative binding of triplicate carbohydrate-binding modules from a thermophilic xylanase

Family 6 carbohydrate-binding modules were amplified by polymerase chain reaction (PCR) from Clostridium stercorarium strain NCIB11754 genomic DNA as a triplet. Individually, these modules bound to xylooligosaccharides and cellooligosaccharides with affinities varying from approximately 3 x 10(3) M(-1) to approximately 1 x 10(5) M(-1). Tandem and triplet combinations of these modules bound co-operatively to soluble xylan and insoluble cellulose to give approximately 20- to approximately 40-fold increases in affinity relative to the individual modules. This co-operativity was an avidity effect resulting from the modules within the tandems and triplet interacting simultaneously with proximal binding sites on the polysaccharides. This occurred by both intrachain and interchain interactions. The duplication or triplication of modules appears to be linked to the growth temperature of the organism; co-operativity in these multiplets may compensate for the loss of affinity at higher temperatures.

Identification and glucan-binding properties of a new carbohydrate-binding module family

The C-terminal 191-residue module of Cel5A from the alkalophilic Bacillus sp. 1139 comprises a carbohydrate-binding module (CBM) belonging to a previously unidentified family that we have classified as CBM family 28. This example, called CBM28, bound specifically to cello-oligosaccharides and mixed beta-(1,3)(1,4)-glucans (barley beta-glucan) with association constants of approximately (1-4)x10(4) M(-1). Its binding to barley beta-glucan was remarkably insensitive to pH between 7.0 and 10.9, in keeping with its alkalophilic source. CBM28 bound to cellulose having a significant non-crystalline content with an association constant similar to that for its binding to soluble glucans. CBM17 (CBM family 17) and CBM28 modules naturally occur as tandems. The CBM17/CBM28 tandem from Cel5A bound with apparent co-operativity to barley beta-glucan. The association of CBM28 with cello-oligosaccharides was driven enthalpically and marked by the different thermodynamic contribution of three putative binding subsites that accommodate a cellohexaose molecule.

Structure of a family 15 carbohydrate-binding module in complex with xylopentaose. Evidence that xylan binds in an approximate 3-fold helical conformation

The recycling of photosynthetically fixed carbon by the action of microbial glycoside hydrolases is a key biological process. The consortium of degradative enzymes involved in this process frequently display catalytic modules appended to one or more noncatalytic carbohydrate-binding modules (CBMs). CBMs play a central role in the optimization of the catalytic activity of plant cell wall hydrolases through their binding to specific plant structural polysaccharides. Despite their pivotal role in the biodegradation of plant biomass, the mechanism by which these proteins recognize their target ligands is unclear. This report describes the structure of a xylan-binding CBM (CBM15) in complex with its ligand. This module, derived from Pseudomonas cellulosa xylanase Xyn10C, binds to both soluble xylan and xylooligosaccharides. The three-dimensional crystal structure of CBM15 bound to xylopentaose has been solved by x-ray crystallography to a resolution of 1.6 A. The protein displays a similar beta-jelly roll fold to that observed in many other families of binding-modules. A groove, 20-25 A in length, on the concave surface of one of the beta-sheets presents two tryptophan residues, the faces of which are orientated at approximately 240 degrees to one another. These form-stacking interactions with the n and n+2 sugars of xylopentaose complementing the approximate 3-fold helical structure of this ligand in the binding cleft of CBM15. In four of the five observed binding subsites, the 2' and 3' hydroxyls of the bound ligand are solvent-exposed, providing an explanation for the capacity of this xylan-binding CBM to accommodate the highly decorated xylans found in the plant cell wall.

The location of the ligand-binding site of carbohydrate-binding modules that have evolved from a common sequence is not conserved

Polysaccharide-degrading enzymes are generally modular proteins that contain non-catalytic carbohydrate-binding modules (CBMs), which potentiate the activity of the catalytic module. CBMs have been grouped into sequence-based families, and three-dimensional structural data are available for half of these families. Clostridium thermocellum xylanase 11A is a modular enzyme that contains a CBM from family 6 (CBM6), for which no structural data are available. We have determined the crystal structure of this module to a resolution of 2.1 A. The protein is a beta-sandwich that contains two potential ligand-binding clefts designated cleft A and B. The CBM interacts primarily with xylan, and NMR spectroscopy coupled with site-directed mutagenesis identified cleft A, containing Trp-92, Tyr-34, and Asn-120, as the ligand-binding site. The overall fold of CBM6 is similar to proteins in CBM families 4 and 22, although surprisingly the ligand-binding site in CBM4 and CBM22 is equivalent to cleft B in CBM6. These structural data define a superfamily of CBMs, comprising CBM4, CBM6, and CBM22, and demonstrate that, although CBMs have evolved from a relatively small number of ancestors, the structural elements involved in ligand recognition have been assembled at different locations on the ancestral scaffold.

Recognition of cello-oligosaccharides by a family 17 carbohydrate-binding module: an X-ray crystallographic, thermodynamic and mutagenic study

The crystal structure of the Clostridium cellulovorans carbohydrate-binding module (CBM) belonging to family 17 has been solved to 1.7 A resolution by multiple anomalous dispersion methods. CBM17 binds to non-crystalline cellulose and soluble beta-1,4-glucans, with a minimal binding requirement of cellotriose and optimal affinity for cellohexaose. The crystal structure of CBM17 complexed with cellotetraose solved at 2.0 A resolution revealed that binding occurs in a cleft on the surface of the molecule involving two tryptophan residues and several charged amino acids. Thermodynamic binding studies and alanine scanning mutagenesis in combination with the cellotetraose complex structure allowed the mapping of the CBM17 binding cleft. In contrast to the binding groove characteristic of family 4 CBMs, family 17 CBMs appear to have a very shallow binding cleft that may be more accessible to cellulose chains in non-crystalline cellulose than the deeper binding clefts of family 4 CBMs. The structural differences in these two modules may reflect non-overlapping binding niches on cellulose surfaces.

Biochemical characterization and identification of catalytic residues in alpha-glucuronidase from Bacillus stearothermophilus T-6

Alpha-D-glucuronidases cleave the alpha-1,2-glycosidic bond of the 4-O-methyl-D-glucuronic acid side chain of xylan, as a part of an array of xylan hydrolyzing enzymes. The alpha-D-glucuronidase from Bacillus stearothermophilus T-6 was overexpressed in Escherichia coli using the T7 polymerase expression system. The purification procedure included two steps, heat treatment and gel filtration chromatography, and provided over 0.3 g of pure enzyme from 1 L of overnight culture. Based on gel filtration, the native protein is comprised of two identical subunits. Kinetic constants with aldotetraouronic acid as a substrate, at 55 degrees C, were a Km of 0.2 mM, and a specific activity of 42 U x mg(-1) (kcat = 54.9 s(-1)). The enzyme was most active at 65 degrees C, pH 5.5-6.0, in a 10-min assay, and retained 100% of its activity following incubation at 70 degrees C for 20 min. Based on differential scanning calorimetry, the protein denatured at 73.4 degrees C. Truncated forms of the enzyme, lacking either 126 amino acids from its N-terminus or 81 amino acids from its C-terminus, exhibited low residual activity, indicating that the catalytic site is located in the central region of the protein. To identify the potential catalytic residues, site-directed mutagenesis was applied on highly conserved acidic amino acids in the central region. The replacements Glu392-->Cys and Asp364-->Ala resulted in a decrease in activity of about five orders of magnitude, suggesting that these residues are the catalytic pair.

The binding pattern of two carbohydrate-binding modules of laminarinase Lam16A from Thermotoga neapolitana: differences in beta-glucan binding within family CBM4

Carbohydrate-binding modules (CBMs) are often part of the complex hydrolytic extracellular enzymes from bacteria and may modulate their catalytic activity. The thermostable catalytic domain of laminarinase Lam16A from Thermotoga neapolitana (glycosyl hydrolase family 16) is flanked by two CBMs, 148 and 161 aa long. They share a sequence identity of 30%, are homologous to family CBM4 and are thus called CBM4-1 and CBM4-2 respectively. Recombinant Lam16A proteins deleted for one or both binding modules and the isolated module CBM4-1 were characterized. Proteins containing the N-terminal module CBM4-1 bound to the soluble polysaccharides laminarin (1,3-beta-glucan) and barley 1,3/1,4-beta-glucan, and proteins containing the C-terminal module CBM4-2 bound additionally to curdlan (1,3-beta-glucan) and pustulan (1,6-beta-glucan), and to insoluble yeast cell wall beta-glucan. The activity of the catalytic domain on soluble 1,3-beta-glucans was stimulated by the presence of CBM4-1, whereas the presence of CBM4-2 enhanced the Lam16A activity towards gelatinized and insoluble or mixed-linkage 1,3-beta-glucan. Thermostability of the catalytic domain was not affected by the truncations. Members of family CBM4 can be divided into four subfamilies, members of which show different polysaccharide-binding specificities corresponding to the catalytic specificities of the associated hydrolytic domains.

Properties and mutation analysis of the CelK cellulose-binding domain from the Clostridium thermocellum cellulosome

The family IV cellulose-binding domain of Clostridium thermocellum CelK (CBD(CelK)) was expressed in Escherichia coli and purified. It binds to acid-swollen cellulose (ASC) and bacterial microcrystalline cellulose (BMCC) with capacities of 16.03 and 3.95 micromol/g of cellulose and relative affinities (K(r)) of 2.33 and 9.87 liters/g, respectively. The CBD(CelK) is the first representative of family IV CBDs to exhibit an affinity for BMCC. The CBD(CelK) also binds to the soluble polysaccharides lichenin, glucomannan, and barley beta-glucan, which are substrates for CelK. It does not bind to xylan, galactomannan, and carboxymethyl cellulose. The CBD(CelK) contains 1 mol of calcium per mol. The CBD(CelK) has three thiol groups and one disulfide, reduction of which results in total loss of cellulose-binding ability. To reveal amino acid residues important for biological function of the domain and to investigate the role of calcium in the CBD(CelK) four highly conserved aromatic residues (Trp(56), Trp(94), Tyr(111), and Tyr(136)) and Asp(192) were mutated into alanines, giving the mutants W56A, W94A, Y111A, Y136A, and D192A. In addition 14 N-terminal amino acids were deleted, giving the CBD-N(CelK). The CBD-N(CelK) and D192A retained binding parameters close to that of the intact CBD(CelK), W56A and W94A totally lost the ability to bind to cellulose, Y136A bound to both ASC and BMCC but with significantly reduced binding capacity and K(r) and Y111A bound weakly to ASC and did not bind to BMCC. Mutations of the aromatic residues in the CBD(CelK) led to structural changes revealed by studying solubility, circular-dichroism spectra, dimer formation, and aggregation. Calcium content was drastically decreased in D192A. The results suggest that Asp192 is in the calcium-binding site of the CBD(CelK) and that calcium does not affect binding to cellulose. The 14 amino acids from the N terminus of the CBD(CelK) are not important for binding. Tyr136, corresponding to Cellulomonas fimi CenC CBD(N1) Y85, located near the binding cleft, might be involved in the formation of the binding surface, while Y111, W56A, and W94A are essential for the binding process by keeping the CBD(CelK) correctly folded.

The structural basis for the ligand specificity of family 2 carbohydrate-binding modules

The interactions of proteins with polysaccharides play a key role in the microbial hydrolysis of cellulose and xylan, the most abundant organic molecules in the biosphere, and are thus pivotal to the recycling of photosynthetically fixed carbon. Enzymes that attack these recalcitrant polymers have a modular structure comprising catalytic modules and non-catalytic carbohydrate-binding modules (CBMs). The largest prokaryotic CBM family, CBM2, contains members that bind cellulose (CBM2a) and xylan (CBM2b), respectively. A possible explanation for the different ligand specificity of CBM2b is that one of the surface tryptophans involved in the protein-carbohydrate interaction is rotated by 90 degrees compared with its position in CBM2a (thus matching the structure of the binding site to the helical secondary structure of xylan), which may be promoted by a single amino acid difference between the two families. Here we show that by mutation of this single residue (Arg-262-->Gly), a CBM2b xylan-binding module completely loses its affinity for xylan and becomes a cellulose-binding module. The structural effect of the mutation has been revealed using NMR spectroscopy, which confirms that Trp-259 rotates 90 degrees to lie flat against the protein surface. Except for this one residue, the mutation only results in minor changes to the structure. The mutated protein interacts with cellulose using the same residues that the wild-type CBM2b uses to interact with xylan, suggesting that the recognition is of the secondary structure of the polysaccharide rather than any specific recognition of the absence or presence of functional groups.

Analysis of binding of the family 2a carbohydrate-binding module from Cellulomonas fimi xylanase 10A to cellulose: specificity and identification of functionally important amino acid residues

The family 2a carbohydrate-binding module (CBM2a) of xylanase 10A from Cellulomonas fimi binds to the crystalline regions of cellulose. It does not share binding sites with the N-terminal family 4 binding module (CBM4-1) from the cellulase 9B from C.fimi, a module that binds strictly to soluble sugars and amorphous cellulose. The binding of CBM2a to crystalline matrices is mediated by several residues on the binding face, including three prominent, solvent-exposed tryptophan residues. Binding to crystalline cellulose was analyzed by making a series of conservative (phenylalanine and tyrosine) and non-conservative substitutions (alanine) of each solvent-exposed tryptophan (W17, W54 and W72). Other residues on the binding face with hydrogen bonding potential were substituted with alanine. Each tryptophan plays a different role in binding; a tryptophan is essential at position 54, a tyrosine or tryptophan at position 17 and any aromatic residue at position 72. Other residues on the binding face, with the exception of N15, are not essential determinants of binding affinity. Given the specificity of CBM2a, the structure of crystalline cellulose and the dynamic nature of the binding of CBM2a, we propose a model for the interaction between the polypeptide and the crystalline surface.

Affinity electrophoresis for the identification and characterization of soluble sugar binding by carbohydrate-binding modules

Affinity electrophoresis was used to identify and quantify the interaction of carbohydrate-binding modules (CBMs) with soluble polysaccharides. Association constants determined by AE were in excellent agreement with values obtained by isothermal titration calorimetry and fluorescence titration. The method was adapted to the identification, study and characterization of mutant carbohydrate-binding modules with altered affinities and specificities. Competition affinity electrophoresis was used to monitor binding of small, soluble mono- and disaccharides to one of the modules.

Review: cyclodextrins and their interaction with amylolytic enzymes

This review is concerned with inhibition of amylases by cyclodextrins (cyclic maltooligosaccharides), the interaction that occurs between amylases and cyclodextrins and the application of cyclodextrin affinity chromatography in the purification of amylases. In many cases, amylases that are competitively inhibited by cyclodextrins can be purified by cyclodextrin affinity chromatography with the cyclodextrins interacting with the active site on such enzymes. Interestingly amylases that are not competitively inhibited by cyclodextrins may also be purified by cyclodextrin affinity chromatography. Therefore, cyclodextrin affinity chromatography can function in the purification of such amylolytic enzymes with the interaction occurring at a site removed from the active site. In such cases it appears that the cyclodextrin is interacting with an affinity site or binding site that is present on some amylolytic enzymes. It seems that certain similarities occur among the binding sites of such enzymes. Literature concerning amylases, and their subsequent purification using cyclodextrin affinity chromatography is reviewed and the fundamental basis of the interaction of the cyclodextrin with amylolytic enzymes is discussed here.

The thermostabilizing domain of the modular xylanase XynA of Thermotoga maritima represents a novel type of binding domain with affinity for soluble xylan and mixed-linkage beta-1,3/beta-1, 4-glucan

Thermotoga maritima XynA is an extremely thermostable modular enzyme with five domains (A1-A2-B-C1-C2). Its catalytic domain (-B-) is flanked by duplicated non-catalytic domains. The C-terminal repeated domains represent cellulose-binding domains (CBDs). Xylanase domains related to the N-terminal domains of XynA (A1-A2) are called thermostabilizing domains because their deletion normally leads to increased thermosensitivity of the enzymes. It was found that a glutathione-S-transferase (GST) hybrid protein (GST-A1A2) containing both A-domains of XynA can interact with various soluble xylan preparations and with mixed-linkage beta-1,3/beta-1,4-glucans. GST-A1A2 showed no affinity for insoluble microcrystalline cellulose, whereas, vice versa, GST-C2, which contains the C-terminal CBD of XynA, did not interact with soluble xylan. Another hybrid protein, GST-A2, displayed the same binding properties as GST-A1A2, indicating that A2 alone can also promote xylan binding. The dissociation constants for the binding of xylose, xylobiose, xylotriose, xylotetraose and xylopentaose by GST-A2, as determined at 20 degrees C by fluorescence quench experiments, were 8.1 x 10(-3) M, 2.3 x 10(-4) M, 2.3 x 10(-5) M, 2.5 x 10(-6)M and 1.1 x 10(-6) M respectively. The A-domains of XynA, which are designated as xylan binding domains (XBD), are, from the structural as well as the functional point of view, prototypes of a novel class of binding domains. More than 50 related protein segments with hitherto unknown function were detected in about 30 other multidomain beta-glycanases, among them putative plant (Arabidopsis thaliana) xylanases. It is argued that polysaccharide binding and not thermostabilization is the main function of A-like domains.

Mannanase Man26A from Cellulomonas fimi has a mannan-binding module

A modular mannanase (Man26A) from the bacterium Cellulomonas fimi contains a mannan-binding module (Man26Abm) that binds to soluble but not to insoluble mannans. Man26Abm does not bind to cellulose, chitin or xylan. The K(d) for binding of Man26Abm to locust bean gum (LBG) is approximately 0.2 microM. Man26A is the first mannanase reported to contain a mannan-binding module.

Cloning and sequence analysis of a new cellulase gene encoding CelK, a major cellulosome component of Clostridium thermocellum: evidence for gene duplication and recombination

The cellulolytic and hemicellulolytic complex of Clostridium thermocellum, termed cellulosome, consists of up to 26 polypeptides, of which at least 17 have been sequenced. They include 12 cellulases, 3 xylanases, 1 lichenase, and CipA, a scaffolding polypeptide. We report here a new cellulase gene, celK, coding for CelK, a 98-kDa major component of the cellulosome. The gene has an open reading frame (ORF) of 2,685 nucleotides coding for a polypeptide of 895 amino acid residues with a calculated mass of 100,552 Da. A signal peptide of 27 amino acid residues is cut off during secretion, resulting in a mature enzyme of 97,572 Da. The nucleotide sequence is highly similar to that of cbhA (V. V. Zverlov et al., J. Bacteriol. 180:3091-3099, 1998), having an ORF of 3,690 bp coding for the 1,230-amino-acid-residue CbhA of the same bacterium. Homologous regions of the two genes are 86.5 and 84.3% identical without deletion or insertion on the nucleotide and amino acid levels, respectively. Both have domain structures consisting of a signal peptide, a family IV cellulose binding domain (CBD), a family 9 glycosyl hydrolase domain, and a dockerin domain. A striking distinction between the two polypeptides is that there is a 330-amino-acid insertion in CbhA between the catalytic domain and the dockerin domain containing a fibronectin type 3-like domain and family III CBD. This insertion, missing in CelK, is responsible for the size difference between CelK and CbhA. Upstream and downstream flanking sequences of the two genes show no homology. The data indicate that celK and cbhA in the genome of C. thermocellum have evolved through gene duplication and recombination of domain coding sequences. celK without a dockerin domain was expressed in Escherichia coli and purified. The enzyme had pH and temperature optima at 6.0 and 65 degrees C, respectively. It hydrolyzed p-nitrophenyl-beta-D-cellobioside with a Km and a Vmax of 1.67 microM and 15.1 U/mg, respectively. Cellobiose was a strong inhibitor of CelK activity, with a Ki of 0.29 mM. The enzyme was thermostable, after 200 h of incubation at 60 degrees C, 97% of the original activity remained. Properties of the enzyme indicated that it is a cellobiohydrolase.

A family IIb xylan-binding domain has a similar secondary structure to a homologous family IIa cellulose-binding domain but different ligand specificity

BACKGROUND

Many enzymes that digest polysaccharides contain separate polysaccharide-binding domains. Structures have been previously determined for a number of cellulose-binding domains (CBDs) from cellulases.

RESULTS

The family IIb xylan-binding domain 1 (XBD1) from Cellulomonas fimi xylanase D is shown to bind xylan but not cellulose. Its structure is similar to that of the homologous family IIa CBD from C. fimi Cex, consisting of two four-stranded beta sheets that form a twisted 'beta sandwich'. The xylan-binding site is a groove made from two tryptophan residues that stack against the faces of the sugar rings, plus several hydrogen-bonding polar residues.

CONCLUSIONS

The biggest difference between the family IIa and IIb domains is that in the former the solvent-exposed tryptophan sidechains are coplanar, whereas in the latter they are perpendicular, forming a twisted binding site. The binding sites are therefore complementary to the secondary structures of the ligands cellulose and xylan. XBD1 and CexCBD represent a striking example of two proteins that have high sequence similarity but a different function.

The cellulose-binding domains from Cellulomonas fimi beta-1, 4-glucanase CenC bind nitroxide spin-labeled cellooligosaccharides in multiple orientations

The N-terminal cellulose-binding domains CBDN1 and CBDN2 from Cellulomonas fimi cellulase CenC each adopt a jelly-roll beta-sandwich structure with a cleft into which amorphous cellulose and soluble cellooligosaccharides bind. To determine the orientation of the sugar chain within these binding clefts, the association of TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl-4-yl) spin-labeled derivatives of cellotriose and cellotetraose with isolated CBDN1 and CBDN2 was studied using heteronuclear 1H-15N NMR spectroscopy. Quantitative binding measurements indicate that the TEMPO moiety does not significantly perturb the affinity of the cellooligo-saccharide derivatives for the CBDs. The paramagnetic enhancements of the amide 1HN longitudinal (DeltaR1) and transverse (DeltaR2) relaxation rates were measured by comparing the effects of TEMPO-cellotetraose in its nitroxide (oxidized) and hydroxylamine (reduced) forms on the two CBDs. The bound spin-label affects most significantly the relaxation rates of amides located at both ends of the sugar-binding cleft of each CBD. Similar results are observed with TEMPO-cellotriose bound to CBDN1. This demonstrates that the TEMPO-labeled cellooligosaccharides, and by inference strands of amorphous cellulose, can associate with CBDN1 and CBDN2 in either orientation across their beta-sheet binding clefts. The ratio of the association constants for binding in each of these two orientations is estimated to be within a factor of five to tenfold. This finding is consistent with the approximate symmetry of the hydrogen-bonding groups on both the cellooligosaccharides and the residues forming the binding clefts of the CenC CBDs.

Thermodynamics of ligand (substrate/end product) binding to endoxylanase from Chainia sp. (NCL-82-5-1): isothermal calorimetry and fluorescence titration studies

The binding of xylo-oligosaccharides to Chainia endoxylanase resulted in a decrease in fluorescence intensity of the enzyme with the formation of 1:1 complex. Equilibrium and thermodynamic parameters of ligand binding were determined by fluorescence titrations and titration calorimetry. The affinity of xylanase for the oligosaccharides increases in the order X2<X3<X4</=X5. Contributions from the enthalpy towards the free energy change decreased with increasing chain length from X2 to X4, whereas an increase in entropy was observed, the change in enthalpy and entropy of binding being compensatory. The entropically driven binding process suggested that hydrophobic interactions as well as hydrogen bonds play a predominant role in ligand binding.

Structure and function analysis of Pseudomonas plant cell wall hydrolases

Hydrolysis of the major structural polysaccharides of plant cell walls by the aerobic soil bacterium Pseudomonas fluorescens subsp. cellulosa is attributable to the production of multiple extracellular cellulase and hemicellulase enzymes, which are the products of distinct genes belonging to multigene families. Cloning and sequencing of individual genes, coupled with gene sectioning and functional analysis of the encoded proteins have provided a detailed picture of structure/function relationships and have established the cellulase-hemicellulase system of P. fluorescens subsp. cellulosa as a model for the plant cell wall degrading enzyme systems of aerobic cellulolytic bacteria. Cellulose- and xylan-degrading enzymes produced by the pseudomonad are typically modular in structure and contain catalytic and noncatalytic domains joined together by serine-rich linker sequences. The cellulases include a cellodextrinase; a beta-glucan glucohydrolase and multiple endoglucanases, containing catalytic domains belonging to glycosyl hydrolase families 5, 9, and 45; and cellulose-binding domains of families II and X, both of which are present in each enzyme. Endo-acting xylanases, with catalytic domains belonging to families 10 and 11, and accessory xylan-degrading enzymes produced by P. fluorescens subsp. cellulosa contain cellulose-binding domains of families II, X, and XI, which act by promoting close contact between the catalytic domain of the enzyme and its target substrate. A domain homologous with NodB from rhizobia, present in one xylanase, functions as a deacetylase. Mananase, arabinanase, and galactanase produced by the pseudomonad are single domain enzymes. Crystallographic studies, coupled with detailed kinetic analysis of mutant forms of the enzyme in which key residues have been altered by site-directed mutagenesis, have shown that xylanase A (family 10) has 8-fold alpha/beta barrel architecture, an extended substrate-binding cleft containing at least six xylose-binding pockets and a calcium-binding site that protects the enzyme from thermal inactivation, thermal unfolding, and attack by proteinases. Kinetic studies of mutant and wild-type forms of a mannanase and a galactanase from P. fluorescens subsp. cellulosa have enabled the catalytic mechanisms and key catalytic residues of these enzymes to be identified.

Characterization and affinity applications of cellulose-binding domains

Cellulose-binding domains (CBDs) are discrete protein modules found in a large number of carbohydrolases and a few nonhydrolytic proteins. To date, almost 200 sequences can be classified in 13 different families with distinctly different properties. CBDs vary in size from 4 to 20 kDa and occur at different positions within the polypeptides; N-terminal, C-terminal and internal. They have a moderately high and specific affinity for insoluble or soluble cellulosics with dissociation constants in the low micromolar range. Some CBDs bind irreversibly to cellulose and can be used for applications involving immobilization, others bind reversibly and are more useful for separations and purifications. Dependent on the CBD used, desorption from the matrix can be promoted under various different conditions including denaturants (urea, high pH), water, or specific competitive ligands (e.g. cellobiose). Family I and IV CBDs bind reversibly to cellulose in contrast to family II and III CBDs which are in general, irreversibly bound. The binding of family II CBDs (CBD(Cex)) to crystalline cellulose is characterized by a large favourable increase in entropy indicating that dehydration of the sorbent and the protein are the major driving forces for binding. In contrast, binding of family IV CBDs (CBD(N1)) to amorphous or soluble cellulosics is driven by a favourable change in enthalpy which is partially offset by an unfavourable entropy change. Hydrogen bond formation and van der Waals interactions are the main driving forces for binding. CBDs with affinity for crystalline cellulose are useful tags for classical column affinity chromatography. The affinity of CBD(N1) for soluble cellulosics makes it suitable for use in large-scale aqueous two-phase affinity partitioning systems.

Multidomain structure and cellulosomal localization of the Clostridium thermocellum cellobiohydrolase CbhA

The nucleotide sequence of the Clostridium thermocellum F7 cbhA gene, coding for the cellobiohydrolase CbhA, has been determined. An open reading frame encoding a protein of 1,230 amino acids was identified. Removal of a putative signal peptide yields a mature protein of 1,203 amino acids with a molecular weight of 135,139. Sequence analysis of CbhA reveals a multidomain structure of unusual complexity consisting of an N-terminal cellulose binding domain (CBD) homologous to CBD family IV, an immunoglobulin-like beta-barrel domain, a catalytic domain homologous to cellulase family E1, a duplicated domain similar to fibronectin type III (Fn3) modules, a CBD homologous to family III, a highly acidic linker region, and a C-terminal dockerin domain. The cellulosomal localization of CbhA was confirmed by Western blot analysis employing polyclonal antibodies raised against a truncated enzymatically active version of CbhA. CbhA was identified as cellulosomal subunit S3 by partial amino acid sequence analysis. Comparison of the multidomain structures indicates striking similarities between CbhA and a group of cellulases from actinomycetes. Average linkage cluster analysis suggests a coevolution of the N-terminal CBD and the catalytic domain and its spread by horizontal gene transfer among gram-positive cellulolytic bacteria.