Physical Gelation of Chitosan in the Presence of β-Glycerophosphate: The Effect of Temperature

Thermosensitive chitosan-based hydrogels supporting motor neuron-like NSC-34 cell differentiation

Motor neuron diseases are neurodegenerative diseases that predominantly affect the neuromuscular system. To date, there are no valid therapeutic treatments for such diseases, and the classical experimental models fail in faithfully reproducing the pathological mechanisms behind them. In this regard, the use of three-dimensional (3D) culture systems, which more closely reproduce the native in vivo environment, can be a promising approach. Hydrogel-based systems are among the most used materials to reproduce the extracellular matrix, featuring an intrinsic similarity with its physiological characteristics. In this study, we developed a thermosensitive chitosan-based hydrogel combined with β-glycerophosphate (βGP) and sodium hydrogen carbonate (SHC), which give the system optimal mechanical properties and injectability, inducing the hydrogel sol-gel transition at 37 °C. An ad hoc protocol for the preparation of the hydrogel was established in order to obtain a highly homogeneous system, leading to reproducible physicochemical characteristics and easy cell encapsulation. All formulations supported the viability of a neuroblastoma/spinal cord hybrid cell line (NSC-34) beyond two weeks of culture and enabled cell differentiation towards a motor neuron-like morphology, characterized by the presence of extended neurites. Based on our results, these hydrogels represent excellent candidates for establishing 3D in vitro models of motor neuron diseases.

Evaluation of an Injectable Hydrogel Based on Hyaluronic Acid-chitosan/β-glycerophosphate-loaded Mesenchymal Stem Cells in Enhancing the Therapeutic Efficacy of Myocardial Infarction

Myocardial infarction (MI), which is due to cardiac dysfunction, results in morbidity and mortality. Moreover, the cellular activity of transplanted mesenchymal stem cells (MSCs)generally limits their therapeutic efficacy in the treatment of MI. Here, inject able hyaluronic acid-chitosan/β-glycerophosphate (HA-CS/β-GP) hydrogel-loaded MSCs were prepared, after which their effects on the treatment of MI were investigated. The synthesized HA-CS/β-GP hydrogels exhibited swelling ratio (SR), an in vitro degradation value, and a gelatin time of 82.19 ± 4.1, 88.18% ± 2.4%, and 9 s, respectively. Further, rheological studies revealed that the elastic modulus of the HA-CS/β-GP hydrogels was ≥230 Pa, exhibiting large elastic to viscous modulus ratio, which indicated their mechanical strength. Furthermore, the in vitro 3T3 cell and MSC culture studies confirmed the good biocompatibility of the HA-CS and HA-CS/β-GP hydrogels. The implantation of the synthesized hydrogels in the mouse MI model considerably improved the therapeutic effect of the MSCs (enhanced cardiac function, reduced cardiomyocyte apoptosis, and increased vascularization) for the first time. The innovative synergistic strategy of combining injectable HA-CS and HA-CS/β-GP hydro gels with MSCs might be suitable for the effective treatment of cardiac morbidity due to MIs. This article is protected by copyright. All rights reserved.

A catechol-chitosan-based adhesive and injectable hydrogel resistant to oxidation and compatible with cell therapy

Injectable hydrogels designed for cell therapy need to be adhesive to the surrounding tissues to maximize their retention and the communication between the host and the encapsulated cells. Catechol grafting is an efficient and well-known strategy to improve the adhesive properties of various polymers, including chitosan. However, catechol groups are also known to be cytotoxic as they oxidize into quinones in alkaline environments. Usually, hydrogels made from catechol-grafted chitosan (cat-CH) oxidize quickly, which tends to limit adhesion and prevent cell encapsulation. In this work, we limited oxidation and improved the cytocompatibility of cat-CH hydrogels by grafting chitosan with dihydroxybenzoic acid (DHBA), a small cat-bearing molecule known to have a high resistance to oxidation. We show that DHBA-grafted CH (dhba-CH) oxidized significantly slower and to a lesser extent that cat-CH made with hydrocaffeic acid (hca-CH). By combining dhba-CH with sodium bicarbonate and phosphate buffer, we fabricated thermosensitive injectable hydrogels with higher mechanical properties, quicker gelation and significantly lower oxidation than previously designed cat-CH systems. The resulting gels are highly adhesive on inorganic substrates and support L929 fibroblast encapsulation with high viability (≥90% after 24 hours), something that was not possible in any previously designed cat-CH gel system. These properties make the dhba-CH hydrogels excellent candidates for minimally invasive and targeted cell therapy in applications that require high adhesive strength.

Injectable chitosan/collagen hydrogels nano-engineered with functionalized single wall carbon nanotubes for minimally invasive applications in bone

Mechanical robustness is an essential consideration in the development of hydrogel platforms for bone regeneration, and despite significant advances in the field of injectable hydrogels, many fail in this regard. Inspired by the mechanical properties of carboxylated single wall carbon nanotubes (COOH-SWCNTs) and the biological advantages of natural polymers, COOH-SWCNTs were integrated into chitosan and collagen to formulate mechanically robust, injectable and thermoresponsive hydrogels with interconnected molecular structure for load-bearing applications. This study presents a complete characterisation of the structural and biological properties, and mechanism of gelation of these novel formulated hydrogels. Results demonstrate that β-glycerophosphate (β-GP) and temperature play important roles in attaining gelation at physiological conditions, and the integration with COOH-SWCNTs significantly changed the structural morphology of the hydrogels to a more porous and aligned network. This led to a crystalline structure and significantly increased the mechanical strength of the hydrogels from kPa to MPa, which is closer to the mechanical strength of the bone. Moreover, increased osteoblast proliferation and rapid adsorption of hydroxyapatite on the surface of the hydrogels indicates increased bioactivity with addition of COOH-SWCNTs. Therefore, these nano-engineered hydrogels are expected to have wide utility in the area of bone tissue engineering and regenerative medicine.

Gelation Based on Host-Guest Interactions Induced by Multi-Functionalized Nanosheets

Host–guest interaction, being reversible and stimuli-responsive, is ideal to be applied to the design of hydrogels. We created a gelation system based on the host–guest interactions between the adamantyl groups and β-cyclodextrin (β-CD) polymer. N,N,N-trimethyl-1-adamantylammonium hydroxide (TriMAA) cations were attached to the pre-exfoliated α-zirconium phosphate (α-ZrP) nanosheets by ionic bonding through a displacement reaction with the exfoliating agents. The exfoliated α-ZrP nanosheets with adamantyl groups directly or indirectly attached to the surface act as reversible high-functionality crosslinkers within the β-CD polymer. The gelation occurred at a host-to-guest ratio of 1:10 or 1:5 at room temperature within minutes. The agents used to exfoliate α-ZrP can tailor the surface of the resultant α-ZrP nanosheets and the ionic strength of the system, which directly affects the further gelation results. Plus, the exfoliating agent cations may generate a host-and-guest interaction with the β-CD polymer as well. This gelation process without covalent bonding formation should help fellow researchers to better understand the gelation system and host–guest interactions.

Vesicular drug delivery for the treatment of topical disorders: current and future perspectives

OBJECTIVES

Vesicular drug delivery has become a useful approach for therapeutic administration of pharmaceutical compounds. Lipid vesicles have found application in membrane biology, immunology, genetic engineering and theragnostics. This review summarizes topical delivery, specifically dermal/transdermal, ocular and transungual, via these vesicles, including future formulation perspectives.

KEY FINDINGS

Liposomes and their subsequent derivatives, viz. niosomes, transferosomes, pharmacososmes and ethosomes, form a significant part of vesicular systems that have been successfully utilized in treating an array of topical disorders. These vesicles are thought to be a safe and effective mode of improving the delivery of lipophilic and hydrophilic drugs.

SUMMARY

Several drug molecules are available for topical disorders. However, physicochemical properties and undesirable toxicity have limited their efficacy. Vesicular delivery systems have the potential to overcome these shortcomings due to properties such as high biocompatibility, simplicity of surface modification and suitability as controlled delivery vehicles. However, incorporating these systems into environmentally responsive dispersants such as hydrogels, ionic liquids and deep eutectic solvents may further enhance therapeutic prowess of these delivery systems. Consequently, improved vesicular drug delivery can be achieved by considering combining some of these formulation approaches.

Comprehensive Review on Hydrogels

The conventional drug delivery systems have a long list of issues of repeated dosing and toxicity arising due to it. The hydrogels are the answer to them and offer a result that minimizes such activities and optimizes therapeutic benefits. The hydrogels proffer tunable properties that can withstand degradation, metabolism, and controlled release moieties. Some of the areas of applications of hydrogels involve wound healing, ocular systems, vaginal gels, scaffolds for tissue, bone engineering, etc. They consist of about 90% of the water that makes them suitable bio-mimic moiety. Here, we present a birds-eye view of various perspectives of hydrogels, along with their applications.

Nasal Delivery of D-Penicillamine Hydrogel Upregulates a Disintegrin and Metalloprotease 10 Expression via Melatonin Receptor 1 in Alzheimer's Disease Models

Alzheimer's disease (AD) is a type of neurodegenerative disease that is associated with the accumulation of amyloid plaques. Increasing non-amyloidogenic processing and/or manipulating amyloid precursor protein signaling could reduce AD amyloid pathology and cognitive impairment. D-penicillamine (D-Pen) is a water-soluble metal chelator and can reduce the aggregation of amyloid-β (Aβ) with metals in vitro. However, the potential mechanism of D-Pen for treating neurodegenerative disorders remains unexplored. In here, a novel type of chitosan-based hydrogel to carry D-Pen was designed and the D-Pen-CS/β-glycerophosphate hydrogel were characterized by scanning electron microscopy and HPLC. Behavior tests investigated the learning and memory levels of APP/PS1 mice treated through the D-Pen hydrogel nasal delivery. In vivo and in vitro findings showed that nasal delivery of D-Pen-CS/β-GP hydrogel had properly chelated metal ions that reduced Aβ deposition. Furthermore, D-Pen mainly regulated A disintegrin and metalloprotease 10 (ADAM10) expression via melatonin receptor 1 (MTNR1α) and the downstream PKA/ERK/CREB pathway. The present data demonstrated D-Pen significantly improved the cognitive ability of APP/PS1 mice and reduced Aβ generation through activating ADAM10 and accelerating non-amyloidogenic processing. Hence, these findings indicate the potential of D-Pen as a promising agent for treating AD.

Influence of Glycerophosphate Salt Solubility on the Gelation Mechanism of Colloidal Chitosan Systems

Recently, thermosensitive chitosan systems have attracted the interest of many researchers due to their growing application potential. Nevertheless, the mechanism of the sol-gel phase transition is still being discussed, and the glycerophosphate salt role is ambiguous. The aim of the work is to analyze the possibility of the exclusive use of a non-sodium glycerophosphate salt and to determine its impact on the gelation conditions determined by rheological and turbidimetric measurements as well as the stability of the systems by measuring changes in the Zeta potential value. It was found that ensuring the same proportions of glycerophosphate ions differing in cation to amino groups present in chitosan chains, leads to obtaining systems significantly different in viscoelastic properties and phase transition conditions. It was clearly shown that the systems with the calcium glycerophosphate, the insoluble form of which may constitute additional aggregation nuclei, undergo the gelation the fastest. The use of magnesium glycerophosphate salt delays the gelation due to the heat-induced dissolution of the salt. Thus, it was unequivocally demonstrated that the formulation of the gelation mechanism of thermosensitive chitosan systems based solely on the concentration of glycerophosphate without discussing its type is incorrect.

The Effects of Crosslinking on the Rheology and Cellular Behavior of Polymer-Based 3D-Multilayered Scaffolds for Restoring Articular Cartilage

Polymer-based tri-layered (bone, intermediate and top layers) scaffolds used for the restoration of articular cartilage were prepared and characterized in this study to emulate the concentration gradient of cartilage. The scaffolds were physically or chemically crosslinked. In order to obtain adequate scaffolds for the intended application, the impact of the type of calcium phosphate used in the bone layer, the polymer used in the intermediate layer and the interlayer crosslinking process were analyzed. The correlation among SEM micrographs, physical-chemical characterization, swelling behavior, rheological measurements and cell studies were examined. Storage moduli at 1 Hz were 0.3-1.7 kPa for physically crosslinked scaffolds, and 4-5 kPa (EDC/NHS system) and 15-20 kPa (glutaraldehyde) for chemically crosslinked scaffolds. Intrinsic viscoelasticity and poroelasticity were considered in discussing the physical mechanism dominating in different time/frequency scales. Cell evaluation showed that all samples are available as alternatives to repair and/or substitute cartilage in articular osteoarthritis.

Chitosan hydrogels in 3D printing for biomedical applications

Tissue engineering and regenerative medicine have entered a new stage of development by the recent progress in biology, material sciences, and particularly an emerging additive manufacturing technique, three-dimensional (3D) printing. 3D printing is an advanced biofabrication technique which can generate patient-specific scaffolds with highly complex geometries while hosting cells and bioactive agents to accelerate tissue regeneration. Chitosan hydrogels themselves have been widely used for various biomedical applications due to its abundant availability, structural features and favorable biological properties; however, the 3D printing of chitosan-based hydrogels is still under early exploration. Therefore, 3D printing technologies represent a new avenue to explore the potential application of chitosan as an ink for 3D printing, or as a coating on other 3D printed scaffolds. The combination of chitosan-based hydrogels and 3D printing holds much promise in the development of next generation biomedical implants.

Thermo-Triggered In Situ Chitosan-Based Gelation System for Repeated and Enhanced Sonodynamic Therapy Post a Single Injection

Sonodynamic therapy (SDT) by utilizing ultrasonic waves triggers the generation of reactive oxygen species (ROS) with the help of sonosensitizers to destruct deep-seated tumors has attracted great attention. However, the efficacy of SDT may not be robust enough due to the insufficient oxygen supply within solid tumors. Additionally, repeated injections and treatments, which are often required to achieve the optimal therapeutic responses, may cause additional side effects and patient incompliance. Herein, a thermo-triggered in situ hydrogel system is developed in which catalase (CAT) conjugated with sonosensitizer meso-tetra (4-carboxyphenyl) porphine (TCPP) is mixed into chitosan (CS) and beta-glycerol phosphate disodium (GP) to form the precursor solution. After injection of the precursor solution into tumors, the in situ sol-gel transformation will occur as triggered by the body temperature, resulting in the localized tumor retention of TCPP-CAT. The locally restrained TCPP-CAT not only produces ROS under ultrasonic treatment, but also sustainably reverses the oxygen-deficient status in solid tumors by triggering the O₂ generation from the decomposition of endogenous H₂ O₂ , further promoting the efficacy of SDT. As a result, the repeated SDT after a single dose injection of such a hydrogel can offer robust treatment effects to effectively eradicate tumors.

A Review: Uses of Chitosan in Pharmaceutical Forms

Chitosan is a natural polysaccharide widespread in nature. It has many unique and attractive properties for the pharmaceutical field: it is biodegradable, safe, hypoallergenic, biocompatible with the body, free of toxicity, with proven anticholesterolemic, antibacterial, and antimycotic action. In this review we highlighted the physical, chemical, mechanical, mucoadhesive, etc. properties of chitosan to be taken into account when obtaining various pharmaceutical forms. The methods by which the pharmaceutical forms based on chitosan are obtained are very extensive, and in this study only the most common ones were presented.

Biodegradable thermoresponsive oligochitosan nanoparticles: Mechanisms of phase transition and drug binding-release

Oligochitosan, a low molecular weight derivative of the cationic biopolymer, chitosan, currently shows a great potential of application as a biodegradable non-toxic stimuli-sensitive drug carrier. This paper aimed to elucidate the thermoresponsive potential of oligochitosan and the temperature-controlled drug binding and release to shed light on oligochitosan potential in stimuli-responsive drug delivery. Mechanisms of thermoresponsive behavior of oligochitosan induced by β-glycerophosphate (GP) were investigated using ITC, DSC, and DLS. Upon heating, the aqueous oligochitosan solution underwent a cooperative transition of the microphase separation type resulting in the formation of stable nano-sized particles. Energetics of the GP-oligochitosan interaction (evaluated by ITC) revealed a positive enthalpy of the GP binding to oligochitosan, which pointed to a notable contribution of dehydration and the related rearrangement of the polysaccharide hydration shell. Energetics of the thermal phase transition of oligochitosan was investigated by DSC upon variation of the solvent dielectric constant and GP concentration. The dependences of the transition parameters on these variables were determined and used for the analysis of the oligochitosan thermoresponsivity mechanism. The binding of ibuprofen to the thermotropic oligochitosan nanogel particles and its release from them were evaluated under near-physiological conditions. Relevantly, the oligochitosan nanoparticles surpassed some reference macromolecular adsorbers by the affinity for the drug and by the delayed release kinetics.

A rheological approach to assess the printability of thermosensitive chitosan-based biomaterial inks

For extrusion-based bioprinting, the inks must be printable and rapidly present sufficient mechanical properties to support additional layers and provide a cohesive, manipulable structure. Thermosensitive hydrogels may be interesting candidates. However, the use of these materials is particularly challenging, since their rheological properties evolve with time and temperature. In this work, a rheological approach to characterize the printability of chitosan-based thermosensitive inks was developed. The method consists of evaluating: (1) the gelation kinetic at room temperature and at 37 °C; (2) shear-thinning behavior to estimate the shear rate applied during printing as a function of printing parameters; and (3) the viscosity after shear removal (recovery test) to simulate behaviour after biomaterial deposition. Hydrogels containing 2 and 3% w v^-1 chitosan, combined with different gelling agents (sodium hydrogen carbonate (SHC), phosphate buffer, beta-glycerophosphate (BGP)) were tested, and compared with alginate/gelatin bioink as controls. To correlate the rheological studies with real printing conditions, a 3D-Discovery bioprinter was used to print hydrogels and the visual aspect of the printed structure was observed. Unconfined compressive tests were carried out to study the impact of applied shear rate during printing on the mechanical properties of printed structures. All pre-hydrogel solutions presented shear-thinning properties. The recovery of viscosity was found to depend on the hydrogel formulation, as well as the level of shear rate and the state of gelation at the time of printing. Formulations made with SHC and phosphate buffer presented too rapid gelation and phase separation, leading to poor printing results. One particularly promising formulation composed of SHC and BGP, when printed at a shear rate of 140 s^-1, before its gelation time (t _g ⩽ 15 min), resulted in good printability and 3D structures with rigidity comparable with the alginate/gelatin bioink. The methodology introduced in this paper could be used to evaluate the printability of other time- and temperature-dependent biomaterial inks in the future.

Thermoinduced aggegation of chitosan systems in perikinetic and orthokinetic regimes

Thermoresponsive colloidal chitosan systems forming the polymer structure in situ are an example of promising solutions in tissue engineering as an injectable scaffolds or drug carriers. Their application method, and thus shearing, may affect the aggregation process in accordance with the colloidal engineering approach. The aim of the study is to compare the kinetics of chitosan aggregation in the perikinetic regime (limited by Brownian motions) with the orthokinetic process carried out under the influence of an external shear field. The research was carried out using static multiple light scattering (S-MLS) and rheometric measurement techniques coupled with small-angle light scattering (Rheo-SALS). It has been found that the introduction of an external shear field (orthokinetic regime) accelerates the aggregation of chitosan systems. Simultaneously, the rotational measurements can even lead to spontaneous gelation, most likely caused by changes in the conformation of chitosan molecules, their deformation and ordering along the shear field.

Injectable Thermosensitive Chitosan/Pullulan-Based Hydrogels with Improved Mechanical Properties and Swelling Capacity

Thermosensitive chitosan/β-glycerophosphate (CS/BGP) systems have been developed as injectable hydrogels. However, the hydrogels exhibited poor mechanical properties due to their physically crosslinked networks. In this work, CS/BGP hydrogels were reinforced by covalent crosslinking using genipin (GE) and concomitantly semi-interpenetrating networks using pullulan (PL). Based on response surface methodology, the optimized formulation was composed of CS (1.05%, w/v), PL (1%, w/v), BGP (6%, w/v), and GE (70.79 mcg/mL). The optimized hydrogels exhibited Young's modulus of 92.65 ± 4.13 kPa and a percentage of equilibrium swelling ratio of 3259.09% ± 58.90%. Scanning electron micrographs revealed a highly porous structure with nanofibrous networks in the CS/PL/BGP/GE hydrogels. The chemical interactions between the compositions were investigated by Fourier-transform infrared spectroscopy. Rheological measurements illustrated that the optimized hydrogels displayed sol-gel transition within one minute at 37 °C, a lower critical solution temperature of about 31 °C, and viscoelastic behavior with high storage modulus. Furthermore, the optimized hydrogels demonstrated higher resistance to in vitro enzymatic degradation, compared to the hydrogels without GE. Our findings could suggest that the thermosensitive CS/PL/BGP/GE hydrogels with enhanced mechanical properties and swelling capacity demonstrate the potential for use as scaffolds and carriers for cartilage tissue engineering and drug delivery applications.

Hydrogel eye drops as a non-invasive drug carrier for topical enhanced Adalimumab permeation and highly efficient uveitis treatment

Uveitis is one of the most popular blind-causing eye diseases worldwide. Adalimumab (ADA) is used for the uveitis treatment through systemic or intravitreal injection at the expense of systemic side effects and increased medical risks. Although eye drops, a non-invasive topical treatment, could be a potential strategy to reduce side effects, it remains challenging to apply due to limited bioavailability mainly linked to poor retention time and permeation capacity for eye biological barriers. Here, we reported hydrogel eye drops composed of low-deacetylated chitosan and β-glycerophosphate as an ADA carrier and tested its toxicity, tolerability, intraocular permeability, and efficacy of non-invasive treatment for uveitis. It's found the ADA-loaded hydrogel eye drops were more efficient than free ADA both in permeation rate and clinical efficacy for uveitis, Overall, this study provides a friendly non-invasive strategy to improve drug permeation rate and uveitis treatment efficacy, which may be valuable to clinically ophthalmic medication.

Injectability of Thermosensitive, Low-Concentrated Chitosan Colloids as Flow Phenomenon through the Capillary under High Shear Rate Conditions

Low-concentrated colloidal chitosan systems undergoing a thermally induced sol-gel phase transition are willingly studied due to their potential use as minimally invasive injectable scaffolds. Nevertheless, instrumental injectability tests to determine their clinical utility are rarely performed. The aim of this work was to analyze the flow phenomenon of thermosensitive chitosan systems with the addition of disodium β-glycerophosphate through hypodermic needles. Injectability tests were performed using a texture analyzer and hypodermic needles in the sizes 14G-25G. The rheological properties were determined by the flow curve, three-interval thixotropy test (3ITT), and Cox-Merz rule. It was found that reducing the needle diameter and increasing its length and the crosshead speed increased the injection forces. It was claimed that under the considered flow conditions, there was no need to take into account the viscoelastic properties of the medium, and the model used to predict the injection force, based solely on the shear-thinning nature of the experimental material, showed very good agreement with the experimental data in the shear rate range of 200-55,000 s-1. It was observed that the increase in the shear rate value led to macroscopic structural changes of the chitosan sol caused by the disentangling and ordering of the polysaccharide chains along the shear field.

Development of Injectable Thermosensitive Chitosan-Based Hydrogels for Cell Encapsulation

The three-dimensional complexity of the native extracellular matrix (ECM) suggests switching from 2D to 3D culture systems for providing the cells with an architecture more similar to the physiological environment. Reproducing the three-dimensionality in vitro can guarantee beneficial effects in terms of cell growth, adhesion, proliferation, and/or their differentiation. Hydrogels have the same tailorable physico-chemical and biological characteristics as ECM materials. In this study, we propose a thermoresponsive chitosan-based hydrogel that gels thanks to the addition of organic and inorganic salt solutions (beta-glycerolphosphate and sodium hydrogen carbonate) and is suitable for cell encapsulation allowing obtaining 3D culture systems. Physico-chemical analyses showed that the hydrogel formulations jellify at physiological conditions (37 °C, pH 7.4), are stable in vitro up to three weeks, have high swelling ratios and mechanical stiffness suitable for cellular encapsulation. Moreover, preliminary biological tests underlined the pronounced biocompatibility of the system. Therefore, these chitosan-based hydrogels are proposed as valid biomaterials for cell encapsulation.

Thermosensitive Injectable Chitosan/Collagen/β-Glycerophosphate Composite Hydrogels for Enhancing Wound Healing by Encapsulating Mesenchymal Stem Cell Spheroids

Chronic wounds caused by diabetic or venous diseases remain a social and healthcare burden. In this work, a new strategy is proposed in which injectable thermosensitive chitosan/collagen/β-glycerophosphate (β-GP) hydrogels were combined with three-dimensional mesenchymal stem cell (3D MSC) spheroids to accelerate chronic wound healing by enhanced vascularization and paracrine effects. Chitosan/collagen/β-GP solution mixed with 3D MSC spheroids was rapidly transformed to a gel at body temperature by physical cross-linking, then overlapped the wounds fully and fitted to any shape of the wound. The results showed that the combination therapy exhibited a markedly therapeutic effect than the hydrogel-loaded two-dimensional (2D) MSCs or 2D MSCs alone. The hydrogel could provide an environment conductive to the attachment and proliferation of encapsulated MSCs, especially accelerating the proliferation and paracrine factor secretion of 3D MSC spheroids. These results supplied a novel alternative approach to treat chronic wounds caused by diabetic or venous diseases.

Stimuli-responsive In situ gelling system for nose-to-brain drug delivery

The diagnosis and treatment of neurological ailments always remain an utmost challenge for research fraternity due to the presence of BBB. The intranasal route appeared as an attractive and alternative route for brain targeting of therapeutics without the intrusion of BBB and GI exposure. This route directly and effectively delivers the therapeutics to different regions of the brain via olfactory and trigeminal nerve pathways. However, shorter drug retention time and mucociliary clearance curtail the efficiency of the intranasal route. The in situ mucoadhesive gel overthrow the limitations of direct nose-to-brain delivery by not only enhancing nasal residence time but also minimizing the mucociliary clearance and enzymatic degradation. This delivery system further improves the nasal absorption as well as bioavailability of drugs in the brain. The in situ mucoadhesive gel is a controlled and sustained release system that facilitates the absorption of various proteins, peptides and other larger lipophilic and hydrophilic moieties. Owing to multiple benefits, in situ gelling system has been widely explored to target the brain via nasal route. However, very few review works are reported which explains the application of in situ nasal gel for brain delivery of CNS acting moieties. Hence, in this piece of work, we have initially discussed the global statistics of neurological disorders reported by WHO and other reputed organizations, nasal anatomy, mechanism and challenges of nose-to-brain drug delivery. The work mainly focused on the use of different stimuli-responsive polymers, specifically thermoresponsive, pH-responsive, and ion triggered systems for the development of an effective and controlled dosage form, i.e., in situ nasal gel for brain targeting of bioactives. We have also highlighted the origin, structure, nature and phase transition behavior of the smart polymers found suitable for nasal administration, including poloxamer, chitosan, EHEC, xyloglucan, Carbopol, gellan gum and DGG along with their application in the treatment of neurological disorders. The article is aimed to gather all the information of the past 10 years related to the development and application of stimuli-responsive in situ nasal gel for brain drug delivery.

Natural hydrogels R&D process: technical and regulatory aspects for industrial implementation

Since hydrogel therapies have been introduced into clinic treatment procedures, the biomedical industry has to face the technology transfer and the scale-up of the processes. This will be key in the roadmap of the new technology implementation. Transfer technology and scale-up are already known for some applications but other applications, such as 3D printing, are still challenging. Decellularized tissues offer a lot of advantages when compared to other natural gels, for example they display enhanced biological properties, due to their ability to preserve natural molecules. For this reason, even though their use as a source for bioinks represents a challenge for the scale-up process, it is very important to consider the advantages that originate with overcoming this challenge. Therefore, many aspects that influence the scaling of the industrial process should be considered, like the addition of drugs or cells to the hydrogel, also, the gelling process is important to determine the chemical and physical parameters that must be controlled in order to guarantee a successful process. Legal aspects are also crucial when carrying out the scale-up of the process since they determine the industrial implementation success from the regulatory point of view. In this context, the new law Regulation (EU) 2017/745 on biomedical devices will be considered. This review summarizes the different aspects, including the legal ones, that should be considered when scaling up hydrogels of natural origin, in order to balance these different aspects and to optimize the costs in terms of raw materials and engine.

Effects of hydroxyapatite on PMMA-HAp cement for biomedical applications

OBJECTIVE

The main goal of this study was to examine the influence of hydroxyapatite (HAp) macroaggreate concentrations on thermal and mechanical properties of radioactive bone cement and to study the relation of glass transition Tg with its mechanical properties.

METHODS

The bone cement as (1-x)PMMA-xHAp binary system was prepared in six [x] distinct concentration parameters of 0.0 up to 0.5. The HAp was synthesized using a solgel procedure following calcination by thermal treatment. The composite was prepared in cold based (non-radioactive) mixing polymethyl methacrylate (PMMA) and HAp. Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and mechanical compressive strength (CS) were used to measure the thermal and mechanical properties.

RESULTS

The DSC and TGA thermal profiles in function to concentration parameter [x] were presented. The CS lies in a range of 3.71-7.37 MPa and the glass transition temperature Tg = 126.27 °C. There was a direct relationship between the PMMA-HAp thermoplastic properties with mechanical and thermal properties in function of HAp concentrations.

CONCLUSION

The specific PMMA-HAp composite, with a concentration ratio of 1:1 and HAp thermal treatment at the Tg, provides a material with a compression strength of 7.37 MPa and a suitable amount of porous similar to a trabecular bone, possible to apply in bone cement implants, regardless of whether they are radioactive or not.

Injectable thermosensitive hybrid hydrogel containing graphene oxide and chitosan as dental pulp stem cells scaffold for bone tissue engineering

Here, we fabricated thermosensitive injectable hydrogel containing poly (N-isopropylacrylamide) (PNIPAAm)-based copolymer/graphene oxide (GO) composite with different feed ratio to chitosan (CS) as a natural polymer through physical and chemical crosslinking for the proliferation and differentiation of the human dental pulp stem cells (hDPSCs) to the osteoblasts. The PNIPAAm copolymer/GO composite was synthesized by free-radical copolymerization of (N-isopropylacrylamide) (NIPAAm), itaconic acid (IA) and maleic anhydride-modified poly(ethylene glycol) (PEG) in the presence of GO and used for the preparation of the hydrogels. The formulated hydrogels were evaluated for the porous architecture, rheological behavior, compressive strength, swelling property, in vitro degradation, hemocompatibility, biocompatibility, and differentiation. The hydrogel could enhance the deposition of minerals and the activity of alkaline phosphatase (ALP), in large part attributable to the oxygen and amine-containing functional groups of GO and CS. The engineered hydrogel could also upregulate the expression of the Runt-related transcription factor 2 and osteocalcin in the hDPSCs cultivated in both the normal and osteogenic media. It seems to promote the absorption of osteogenic inducer too. Based on our findings, the engineered hydrogel demonstrated the osteogenic potential, upon which it is proposed as a constructing scaffold in bone tissue engineering for the transplantation of hDPSCs.

Injectable thermosensitive chitosan/gelatin-based hydrogel carried erythropoietin to effectively enhance maxillary sinus floor augmentation in vivo

OBJECTIVE

Maxillary sinus floor augmentation (MSFA) is commonly used to increase the alveolar bone height in the posterior maxilla before implant placement. In the present study, we evaluated if the injectable thermosensitive chitosan/β-sodium glycerophosphate disodium salt hydrate/gelatin (CS/GP/GA) hydrogel carried erythropoietin (EPO) could enhance the new bone formation for MSFA in vivo.

METHODS

EPO-CS/GP/GA hydrogel was prepared by ionic crosslinking. Then, characteristics of EPO-CS/GP/GA were evaluated by morphology, injectable property and pH on the gelling time (GT). The release profile of EPO was evaluated by enzyme linked immunosorbent assay (ELISA), and effects of EPO on proliferation and osteoblastic differentiation of bone marrow stromal cells (BMSC) were analyzed by 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide (MTT) and reverse transcription quantitative real-time PCR (RT-qPCR), respectively. Finally, EPO-CS/GP/GA was injected into the maxillary sinus floor of the rabbit to test the potential application for MSFA.

RESULTS

Results showed that GT was decreased with the increase of pH value. The GT was 110±15s at pH 7.0. SEM images showed that the CS/GP/GA hydrogel had a sponge network structure. Results from ELISA assay revealed that the cumulative release of EPO from the EPO-CS/GP/GA hydrogel reached 67% at 4h, and 94% at 15 days. MTT assay showed that EPO within EPO-CS/GP/GA hydrogel could significantly promote proliferation of BMSCs compared to control group (p<0.001) . Results of RT-qPCR assays demonstrated that the expression of Sp7, Runx2, Col I and Alp were significantly increased from EPO-CS/GP/GA group compared to control group on day 14 (p<0.001). Importantly, EPO-CS/GP/GA hydrogel could significantly induce bone formation (81.98mm³) compared with control group (43.11mm³) after 12 weeks post-implantation in vivo. The calculation of thickness of mesenchymal condensation indicated that thickness of mesenchymal condensation was significantly increased from EPO-CS/GP/GA group (∼121.4μm) compared to control group (∼37μm) resulting in enhancing intramembranous ossification.

SIGNIFICANCE

The EPO-CS/GP/GA hydrogel provides a novel strategy for MSFA with a minimally invasive way.

Strong, Machinable, and Insulating Chitosan-Urea Aerogels: Toward Ambient Pressure Drying of Biopolymer Aerogel Monoliths

Biopolymer aerogels are an emerging class of materials with potential applications in drug delivery, thermal insulation, separation, and filtration. Chitosan is of particular interest as a sustainable, biocompatible, and abundant raw material. Here, we present urea-modified chitosan aerogels with a high surface area and excellent thermal and mechanical properties. The irreversible gelation of an acidic chitosan solution is triggered by the thermal decomposition of urea at 80 °C through an increase in pH and, more importantly, the formation of abundant ureido terminal groups. The hydrogels are dried using either supercritical CO₂ drying (SCD) or ambient pressure drying (APD) methods to elucidate the influence of the drying process on the final aerogel properties. The hydrogels are exchanged into ethanol prior to SCD, and into ethanol and then heptane prior to APD. The surface chemistry and microstructure are monitored by solid-state NMR and Fourier transform infrared spectroscopy, scanning electron microscopy, and nitrogen sorption. Surprisingly, large monolithic aerogel plates (70 × 70 mm²) can be produced by APD, albeit at a somewhat higher density (0.17-0.42 g/cm³). The as prepared aerogels have thermal conductivities of ∼24 and ∼31 mW/(m·K) and surface areas of 160-170 and 85-230 m²/g, for SCD and APD, respectively. For a primarily biopolymer-based material, these aerogels are exceptionally stable at elevated temperature (TGA) and char and self-extinguish after direct flame exposure. The urea-modified chitosan aerogels display superior mechanical properties compared to traditional silica aerogels, with no brittle rupture up to at least 80% strain, and depending on the chitosan concentration, relatively high E-moduli (1.0-11.6 MPa), and stress at 80% strain values (σ₈₀ of 3.5-17.9 MPa). Remarkably, the aerogel monoliths can be shaped and machined with standard tools, for example, drilling and sawing. This first demonstration to produce monolithic and machinable, mesoporous aerogels from bio-sourced, renewable, and nontoxic precursors, combined with the potential for reduced production cost by means of simple APD, opens up new opportunities for biopolymer aerogel applications and marks an important step toward commercialization of biopolymer aerogels.

In Vitro Release of 5-Fluorouracil and Methotrexate from Different Thermosensitive Chitosan Hydrogel Systems

5-Fluorouracil is a member of cytotoxic drugs with poor selectivity to cancer cells. Currently, systemic administration of this anti-cancer drug (oral or injection) exposes normal tissues to the drug-induced toxicity. Nowadays, attention has been greatly directed towards in situ gel-forming systems that can be injected into the affected tissues in its sol form with a minimally invasive technique. More specifically, chitosan hydrogel systems were in focus due to their antibacterial effect as well as their biodegradable, biocompatible, and mucoadhesive properties. In the present work, 5-fluorouracil was loaded on various thermosensitive chitosan hydrogel systems cross linked with different linking agents like β-glycerophosphate, pluronic F127, and hydroxyapatite. Also, methotrexate was added to 5-fluorouracil in order to gain its previously reported synergistic effects. Firstly, a compatibility study was performed using UV-spectrophotometric, infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) techniques to exclude the possibility of any physical or chemical interactions between the selected drugs and excipients. The prepared hydrogel systems were characterized for their physicochemical properties including organoleptic, pH, syringeability and injectability, viscosity, and gelation temperature (Tgel) by various analysis techniques. Moreover, the in vitro release behavior of 5-fluorouracil and methotrexate was determined with a modified analytical method. The results indicated that chitosan hydrogel system cross-linked with a combination of β- glycerophosphate, and 10 % pluronicF127 (F4) showed the most suitable physicochemical properties and release profile. Accordingly, this formula can be considered as a missionary system for localized sustained delivery of cytotoxic drugs.

Preferential drug delivery to tumor cells than normal cells using a tunable niosome–chitosan double package nanodelivery system: a novel in vitro model

Background

We previously described the properties of a targeted drug delivery system (DDS) in a cell-free system. Here, in this comparative cell-based study (normal and tumor cells), we provide a quantitative analysis of the extracellular diffusion and intracellular localization of this DDS. This DDS consists of fluorescence-labeled paclitaxel encapsulated in non-ionic surfactant vesicles/niosomes embedded in a thermo-sensitive cross-linked chitosan hydrogel with an affinity for the MUC1 mucin surface antigen overexpressed on tumor cells, and designed for a sustained and controlled, localized delivery of embedded drugs. We evaluated DDS in our novel in vitro model using MatTek’ glass-bottom culture plates and compared human cancer cell lines (OV2008 epithelial origin carcinoma and U373 glioma, both overexpressing MUC1) with human normal epithelial control cell lines (IMMC3 and IOSE-121 using differential contrast and confocal microscopy.

Results

Tumor cells incubated in the presence of chitosan alone or DDS-containing chitosan–niosome–paclitaxel–BODIPY 564/570, showed a prominent granular accumulation on their surface when compared to the normal cells. Quantitation of gray value light intensity of the extracellular region of chitosan alone treated OV2008 and IOSE-121 controls done by analysis of multiple radial line segments, 4 µm each, using ImageJ software showed 2 times higher intensity around the OV2008 than around normal IOSE-121 controls (p < 0.05). In the DDS-treated OV2008 cells, extracellular fluorescence intensity measured at different diffusion distances outside of the cells, in three different zones showed the difference in means of fluorescence intensity in these zones (p < 0.05) with the highest level of fluorescence near the cell surface indicating a concentration gradient, most likely driven by the high affinity of chitosan to the MUC1 receptor. Also, as chitosan alone accumulated two times more along the edge of tumor cells compared to normal cells, we found intracellular fluorescence intensity quantified at time intervals to be also 2 times higher in OV2008 than in normal IMCC3 cells (p < 0.05).

Conclusion

Based on the observation of the DDS preferentially targeting tumor cells, there is a potential implication for the localized delivery of therapeutic drug doses to solid tumors or post-surgical solid tumors cavities containing residual tumor cells.

Electric Field-Driven On-Request Instant in Situ Formation/Removal of Solid Hydrogel within Microchannels for Efficient Electrophoretic Separation

Electrophoretic separation in short microchannels is a promising way for rapid analysis of biomolecules, but the pressurized laminar flow may compromise the separation efficiency. In this work, through an electric field, instant formation and removal of a solid chitosan/β-glycerol phosphate (CS/β-GP) hydrogel within microchannels of microchips were realized. In a typical cross-type microchip, the CS/β-GP hydrogel was precisely formed in the separation microchannel within 15 s of the application of a voltage of 2000 V. Highly efficient separation of peptides and proteins was achieved, and theoretical plate numbers of 0.6 to 1.5 × 10⁶/m were attained for proteins in 120 s. The used hydrogel could be swiftly removed also with an electric field, and the whole procedure was achieved on a standard microchip electrophoresis device with no extra accessory or special operation required.

Biomaterials-Induced Stem Cells Specific Differentiation Into Intervertebral Disc Lineage Cells

Stem cell therapy, which promotes stem cells differentiation toward specialized cell types, increases the resident population and production of extracellular matrix, and can be used to achieve intervertebral disc (IVD) repair, has drawn great attention for the development of IVD-regenerating materials. Many materials that have been reported in IVD repair have the ability to promote stem cells differentiation. However, due to the limitations of mechanical properties, immunogenicity and uncontrollable deviations in the induction of stem cells differentiation, there are few materials that can currently be translated into clinical applications. In addition to the favorable mechanical properties and biocompatibility of IVD materials, maintaining stem cells activity in the local niche and increasing the ability of stem cells to differentiate into nucleus pulposus (NP) and annulus fibrosus (AF) cells are the basis for promoting the application of IVD-regenerating materials in clinical practice. The purpose of this review is to summarize IVD-regenerating materials that focus on stem cells strategies, analyze the properties of these materials that affect the differentiation of stem cells into IVD-like cells, and then present the limitations of currently used disc materials in the field of stem cell therapy and future research perspectives.

Injectable and thermosensitive nanofibrous hydrogel for bone tissue engineering

The use of injectable hydrogels is currently restricted by the challenge of achieving fast gelation, good mechanical strength, and cytocompatibility. Polymeric self-assembly is a potent tool for generating functional materials that combine multiple characteristics and can react to external factors. In this study, we have developed fiber-reinforced composite hydrogels that exhibits significantly enhanced mechanical strength, reduced gelling time, and excellent cytocompatibility. The practicability of developing a chitosan-based thermogelling solution using hydroxyapatite and polyelectrolyte complex (PEC) self-assembled fibers were evaluated. The effect of βGP concentration on gelation time was studied by varying the concentration of βGP added to the chitosan solution. Various combinations were tested to create a suitable hydrogel environment for cell encapsulation, growth, and proliferation at physiological pH and temperature. Determination of Young modulus revealed that PEC fibers reinforced hydrogel was three times stiffer than chitosan-βGP gels. The gelation time was reduced to 3 min, and the hydrogels had porous structures and gels at physiological pH, temperature, and showed >80% viability for MTT assay to MG63 cells. Moreover, confocal imaging of PEC fiber reinforced hydrogels showed noticeable viability and proliferation. The molecular interactions between gelling agents, polyelectrolytes, and hydroxyapatite were studied using FTIR. We investigated interfacial bonding between PEC fibers with βGP, NaHCO_3, and HAp. The combination of hydroxyapatite and polymer self-assembly technique improved the efficiency of injectable hydrogels that are helpful in minimally invasive applications.

Overview of natural hydrogels for regenerative medicine applications

Hydrogels from different materials can be used in biomedical field as an innovative approach in regenerative medicine. Depending on the origin source, hydrogels can be synthetized through chemical and physical methods. Hydrogel can be characterized through several physical parameters, such as size, elastic modulus, swelling and degradation rate. Lately, research is focused on hydrogels derived from biologic materials. These hydrogels can be derived from protein polymers, such as collage, elastin, and polysaccharide polymers like glycosaminoglycans or alginate among others. Introduction of decellularized tissues into hydrogels synthesis displays several advantages compared to natural or synthetic based hydrogels. Preservation of natural molecules such as growth factors, glycans, bioactive cryptic peptides and natural proteins can promote cell growth, function, differentiation, angiogenesis, anti-angiogenesis, antimicrobial effects, and chemotactic effects. Versatility of hydrogels make possible multiple applications and combinations with several molecules on order to obtain the adequate characteristic for each scope. In this context, a lot of molecules such as cross link agents, drugs, grow factors or cells can be used. This review focuses on the recent progress of hydrogels synthesis and applications in order to classify the most recent and relevant matters in biomedical field.

Invited review: Accelerating mammary gland involution after drying-off in dairy cattle

Bovine mammary gland involution, as a part of the reproductive cycle in dairy cows, is a very important remodeling transformation of the mammary gland for the subsequent lactation. There is considerable incentive to accelerate mammary gland involution to improve udder health, shorten the dry period, and simplify the management process by reducing dietary changes. The complex process of mammary involution is characterized by morphological changes in the epithelial cells and mammary tissue, changes in the composition of mammary secretions, and changes in the integrity of tight junctions. Involution is facilitated by elements of the immune system and several types of proteases and is coordinated by various types of hormones. This review first describes the involution process and then argues for the need to accelerate it. Last, this review focuses on various intervention methods for accelerating involution. Our aim is to provide a comprehensive overview of bovine mammary gland involution as well as potential techniques and new opinions for dry cow management.

Thermally triggered injectable chitosan/silk fibroin/bioactive glass nanoparticle hydrogels for in-situ bone formation in rat calvarial bone defects

Copper-containing bioactive glass nanoparticles (Cu-BG NPs) with designed compositions and sizes were synthesized and incorporated into chitosan (CH)/silk fibroin (SF)/glycerophosphate (GP) composites to prepare injectable hydrogels for cell-free bone repair. The resulting Cu-BG/CH/SF/GP gels were found to exhibit well-defined injectability and to undergo rapid gelation at physiological temperature and pH. They were highly porous and showed the ability to administer Si, Ca and Cu ions at their respective safe doses in a sustained and controlled manner. In vitro studies revealed that the gels supported the growth of seeded MC3T3-E1 and human umbilical vein endothelial cells, and effectively induced them toward osteogenesis and angiogenesis, respectively. In vivo bone repair based on a critical-size rat calvarial bone defect model demonstrated that the optimal Cu-BG/CH/SF/GP gel was able to fully restore the bone defect with formation of vascularized bone tissue and mineralized collagen deposition during a treatment period of 8 weeks without utilization of any cells and/or growth factors. The results suggest that the presently developed Cu-BG/CH/SF/GP composite hydrogels have great potential and translation ability for bone regeneration owing to their thermo-sensitive properties, cell-free bioactivity, and cost-effectiveness. STATEMENT OF SIGNIFICANCE: Hydrogels loaded with cells and/or growth factors exhibit potential in bone repair. However, they have been facing obstacles related to the clinic translation. Here, a novel type of hydrogel system consisting of copper-containing bioactive glass nanoparticles and chitosan/silk fibroin composite was developed. These gels showed injectability and thermally triggered in situ gelation properties and were able to administer the release of ions at safe but effective doses in a controlled manner while inducing the seeded cells toward osteogenesis and angiogenesis. The optimal gel showed the ability to fully repair critical-size rat calvarial bone defects without involving time consuming cell processing and/or the use of expensive growth factors, confirming that this novel hydrogel system has great potential for translation to the clinic.

Injectable Chitosan Scaffolds with Calcium β-Glycerophosphate as the Only Neutralizing Agent

The presented work describes the method of preparation of thermosensitive chitosan hydrogels using calcium β-glycerophosphate salt as the only pH neutralizing agent and supporting the crosslinking process. The presence of calcium ions instead of sodium ions is particularly important in the case of scaffolds in bone tissue engineering. Rheological and physicochemical properties of low concentrated chitosan solutions with the addition of calcium β-glycerophosphate were investigated using rotational rheometry techniques, Zeta potential (by electrophoresis), XPS, and SEM analysis together with an EDS detector. It was found to be possible to prepare colloidal solutions of chitosan containing only calcium β-glycerophosphate (without sodium ions) undergoing a sol-gel phase transition at the physiological temperature of the human body. It has also been shown that it is possible to further enrich the obtained cellular scaffolds with calcium ions. Using the addition of calcium carbonate, hydrogels with a physiological ratio of calcium to phosphorus (1.6–1.8):1 were obtained.

Self-assembly behavior of the keratose proteins extracted from oxidized Ovis aries wool fibers

Water soluble keratose proteins were obtained from an Ovis Aries wool using peracetic acid oxidation. The wool samples and the extracted keratose proteins were characterized by using FTIR, XRD, SEM and TGA techniques. Fractions of α-keratose (MW = 43-53 kDa) along with protein species with molecular weights between 23 kDa and 33 kDa were identified in the SDS-PAGE analysis result of the extracted protein mixture. DLS and AFM experiments indicated that self-assembled globular nanoparticles with diameters between 15 nm and 100 nm formed at 5 mg/ml keratose concentration. On the other hand, upon incubation of 10 w % keratose solutions at 37 °C and 50 °C, interconnected keratose hydrogels with respective storage modulus (G') values of 0.17 ± 0.03 kPa and 3.7 ± 0.5 kPa were obtained. It was shown that the keratose hydrogel prepared at 37 °C supported L929 mouse fibroblast cell proliferation which suggested that these keratose hydrogels could be promising candidates in soft tissue engineering applications.

The potential use of thermosensitive chitosan/silk sericin hydrogels loaded with longan seed extract for bone tissue engineering

In this study, hydrogels that were thermosensitive at body temperature were developed using chitosan (CS)/silk sericin (SS)/β-glycerophosphate (β-GP) loaded with longan seed extract (LE) for use in bone tissue engineering. These hydrogels were transformed into a gel at 37 °C within 10 min via interactions between CS and β-GP. The incorporation of SS resulted in a shorter gelation time of 5-7 min. The morphological structure of the thermosensitive CS/β-GP hydrogels exhibited an irregular pore structure, whereas the morphological structure of the thermosensitive CS/SS/β-GP hydrogels became more slender and porous. The incorporation of SS affected the network structure of the CS hydrogels, which degraded more rapidly. Moreover, the cumulative amounts of both gallic acid (GA) and ellagic acid (EA) released from the hydrogels loaded with LE increased with an increase in the SS content. Finally, these thermosensitive hydrogels were non-toxic to both a mouse fibroblast cell line (NCTC clone 929) and a mouse osteoblast cell line (MC3T3-E1) and promoted the attachment of MC3T3-E1 cells to the surface of the hydrogels. Therefore, these thermosensitive hydrogels might be a promising candidate for bone tissue engineering.

Strategies for Improving Ocular Drug Bioavailability and Corneal Wound Healing with Chitosan-Based Delivery Systems

The main inconvenience of conventional eye drops is the rapid washout of the drugs due to nasolacrimal drainage or ophthalmic barriers. The ocular drug bioavailability can be improved by either prolonging retention time in the cul-de-sac or by increasing the ocular permeability. The focus of this review is to highlight some chitosan-based drug delivery approaches that proved to have good clinical efficacy and high potential for use in ophthalmology. They are exemplified by recent studies exploring in-depth the techniques and mechanisms in order to improve ocular bioavailability of the active substances. Used alone or in combination with other compounds with synergistic action, chitosan enables ocular retention time and corneal permeability. Associated with other stimuli-responsive polymers, it enhances the mechanical strength of the gels. Chitosan and its derivatives increase drug permeability through the cornea by temporarily opening tight junctions between epithelial cells. Different types of chitosan-based colloidal systems have the potential to overcome the ocular barriers without disturbing the vision process. Chitosan also plays a key role in improving corneal wound healing by stimulating the migration of keratinocytes when it is used alone or in combination with other compounds with synergistic action.