Self-assembly and adhesion of DOPA-modified methacrylic triblock hydrogels

Antibacterial bioadhesive layer-by-layer coatings for orthopedic applications

In this study, thin LbL films were produced by combining the adhesive properties of the hyaluronic acid–dopamine conjugate with the bioactivity and bactericidal properties of silver doped bioactive glass nanoparticles.

On-demand and negative-thermo-swelling tissue adhesive based on highly branched ambivalent PEG-catechol copolymers

A series of well-designed highly branched PEG-catechol based thermo-responsive copolymers were synthesized via a one-pot RAFT polymerization. A varying degree of photocrosslinkable (meth)acrylate moieties were incorporated within the 3D structure to allow on-demand photocuring (strong cohesion, unlike conventional PEG adhesives). At the same time, multitudes of free catechol groups inspired from adhesive proteins of marine mussels were also introduced in the hyperbranched structure, giving rise to adherence to skin and cardiac tissue. The resulting ambivalent PEG-catechol based copolymers were systematically studied to investigate the effects of polymer composition on tissue bioadhesive and swelling properties, comparing acrylates to methacrylates and PEG to 2-hydroxyethyl acrylamide (HEAA). It was proved that DOPA played a major role in the adhesion performance as it significantly enhanced the adhesion performances on varied substrates. The highly branched PEG-catechol copolymers demonstrate the great potential in the design of novel surgical glues, sealants or drug delivery vectors.

Facile functionalized of SBA-15 via a biomimetic coating and its application in efficient removal of uranium ions from aqueous solution

A novel dopamine-functionalized mesoporous silica (DMS), synthesized by grafting dopamine onto a mesoporous molecular sieve (SBA-15), was developed as a sorbent to extract U(VI) from aqueous solution. The method used to modify SBA-15 was simple, facile and cost-effective. The DMS was characterized by SEM, TEM, XRD and BET, showing that the material had an ordered mesoporous structure and a large surface area. The effect of contact time, pH, ionic strength, temperature, and solid-liquid ratio on the sorption process was investigated. It was demonstrated that the adsorption of U(VI) by DMS was fast and that it can be described by the pseudo-second order-equation where the equilibrium time was 20 min. Additionally, the adsorption isotherm data were fitted well by the Langmuir model with the maximum adsorption capacity of DMS of 196 mg/g at pH 6.0. Furthermore, the influence of the K(+) and Na(+) concentrations and solid-to-liquid ratio on the sorption was very weak, and the values of the thermodynamic parameters revealed that the sorption process was exothermic and spontaneous. All the results suggested that the DMS could be used as an excellent adsorbent to remove U(VI) from aqueous solution.

Copper removal using bio-inspired polydopamine coated natural zeolites

Herein, for the first time, natural clinoptilolite-rich zeolite powders modified with a bio-inspired adhesive, polydopamine (PDA), have been systematically studied as an adsorbent for copper cations (Cu(II)) from aqueous solution. Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA) revealed successful grafting of PDA onto the zeolite surface. The effects of pH (2-5.5), PDA treatment time (3-24h), contact time (0 to 24h) and initial Cu(II) ion concentrations (1 to 500mgdm(-3)) on the adsorption of Cu(II) ions were studied using atomic absorption spectroscopy (AAS) and neutron activation analysis (NAA). The adsorption behavior was fitted to a Langmuir isotherm and shown to follow a pseudo-second-order reaction model. The maximum adsorption capacities of Cu(II) were shown to be 14.93mgg(-1) for pristine natural zeolite and 28.58mgg(-1) for PDA treated zeolite powders. This impressive 91.4% increase in Cu(II) ion adsorption capacity is attributed to the chelating ability of the PDA on the zeolite surface. Furthermore studies of recyclability using NAA showed that over 50% of the adsorbed copper could be removed in mild concentrations (0.01M or 0.1M) of either acid or base.

A chitin nanofibril reinforced multifunctional monolith poly(vinyl alcohol) cryogel

The antioxidant and antimicrobial functionalization of a chitin nanofibril (CNF) reinforced poly(vinyl alcohol) cryogel prepared by immersing in an alkaline dopamine solution followed by reducing AgNO₃ into Ag nanoparticles on the macroporous structure of a spongy cryogel.

pH-triggered self-assembly of biocompatible histamine-functionalized triblock copolymers

Histamine functionalized poly(allyl glycidyl ether)-b-poly(ethylene glycol)-b-poly(allyl glycidyl ether) (PAGE-PEO-PAGE) triblock copolymers represent a new class of physically cross-linked, pH-responsive hydrogels with significant potential for biomedical applications. These telechelic triblock copolymers exhibited abrupt and reversible hydrogelation above pH 7.0 due to a hudrophilic/hydrophobic transition of the histamine units to form a network of hydrophobic domains bridged by a hydrophilic PEO matrix. These hydrophobic domains displayed improved ordering upon increasing pH and self-assembled into a body centered cubic lattice at pH 8.0, while at lower concentrations formed well-defined micelles. Significantly, all materials were found to be non-toxic when evaluated on three different cell lines and suggests a range of medical and biomedical applications.

Evaluation of thermoresponsive properties and biocompatibility of polybenzofulvene aggregates for leuprolide delivery

In this study, a polybenzofulvene derivative named poly-6-MOEG-9-BF3k, was evaluated as polymeric material for the production of injectable thermoresponsive nano-aggregates able to load low molecular weight peptidic drug, like the anticancer leuprolide. Thermoresponsive behavior of poly-6-MOEG-9-BF3k was studied in aqueous media by evaluating scattering intensity variations by means of DLS in function of temperature. Zeta potential measurements and SEM observations were also carried out. Moreover, critical aggregation temperature of the poly-6-MOEG-9-BF3k polymer was evaluated by pyrene fluorescence analysis. Then, the ability of prepared thermoresponsive aggregates to protect this model oligopeptide drug and regulate its release rate in function of external temperature was evaluated in vitro. Finally, biocompatibility of poly-6-MOEG-9-BF3k aggregates was tested in vitro on a healthy cell line (human bronchial epithelial cell; 16-HBE) and in vivo on rat animal model upon subcutaneous administration.

Designing nanostructured block copolymer surfaces to control protein adhesion

The profile and conformation of proteins that are adsorbed onto a polymeric biomaterial surface have a profound effect on its in vivo performance. Cells and tissue recognize the protein layer rather than directly interact with the surface. The chemistry and morphology of a polymer surface will govern the protein behaviour. So, by controlling the polymer surface, the biocompatibility can be regulated. Nanoscale surface features are known to affect the protein behaviour, and in this overview the nanostructure of self-assembled block copolymers will be harnessed to control protein behaviour. The nanostructure of a block copolymer can be controlled by manipulating the chemistry and arrangement of the blocks. Random, A-B and A-B-A block copolymers composed of methyl methacrylate copolymerized with either acrylic acid or 2-hydroxyethyl methacrylate will be explored. Using atomic force microscopy (AFM), the surface morphology of these block copolymers will be characterized. Further, AFM tips functionalized with proteins will measure the adhesion of that particular protein to polymer surfaces. In this manner, the influence of block copolymer morphology on protein adhesion can be measured. AFM tips functionalized with antibodies to fibronectin will determine how the surfaces will affect the conformation of fibronectin, an important parameter in evaluating surface biocompatibility.

Mussel-inspired load bearing metal-polymer glues

A mussel-inspired synthetic adhesive based on dopamine containing methacrylate copolymers was developed to bond polymers to metal surfaces at an adhesion strength of up to 20 MPa for bulk samples.

Antibacterial polyelectrolyte micelles for coating stainless steel

In this study, we report on the original synthesis and characterization of novel antimicrobial coatings for stainless steel by alternating the deposition of aqueous solutions of positively charged polyelectrolyte micelles doped with silver-based nanoparticles with a polyanion. The micelles are formed by electrostatic interaction between two oppositely charged polymers: a polycation bearing 3,4-dihydroxyphenylalanine units (DOPA, a major component of natural adhesives) and a polyanion (poly(styrene sulfonate), PSS) without using any block copolymer. DOPA units are exploited for their well-known ability to anchor to stainless steel and to form and stabilize biocidal silver nanoparticles (Ag(0)). The chlorine counteranion of the polycation forms and stabilizes biocidal silver chloride nanoparticles (AgCl). We demonstrate that two layers of micelles (alternated by PSS) doped with silver particles are enough to impart to the surface strong antibacterial activity against gram-negative E. coli. Moreover, micelles that are reservoirs of biocidal Ag(+) can be easily reactivated after depletion. This novel water-based approach is convenient, simple, and attractive for industrial applications.

Recombinant mussel adhesive protein fp-5 (MAP fp-5) as a bulk bioadhesive and surface coating material

Mussel adhesive proteins (MAPs) attach to all types of inorganic and organic surfaces, even in wet environments. MAP of type 5 (fp-5), in particular, has been considered as a key adhesive material. However, the low availability of fp-5 has hampered its biochemical characterization and practical applications. Here, soluble recombinant fp-5 is mass-produced in Escherichia coli. Tyrosinase-modified recombinant fp-5 showed ∼1.11 MPa adhesive shear strength, which is the first report of a bulk-scale adhesive force measurement for purified recombinant of natural MAP type. Surface coatings were also performed through simple dip-coating of various objects. In addition, complex coacervate using recombinant fp-5 and hyaluronic acid was prepared as an efficient adhesive formulation, which greatly improved the bulk adhesive strength. Collectively, it is expected that this work will enhance basic understanding of mussel adhesion and that recombinant fp-5 can be successfully used as a realistic bulk-scale bioadhesive and an efficient surface coating material.

Biomechanical properties of Achilles tendon repair augmented with a bioadhesive-coated scaffold

The Achilles tendon is the most frequently ruptured tendon. Both acute and chronic (neglected) tendon ruptures can dramatically affect a patient's quality of life, and require a prolonged period of recovery before return to pre-injury activity levels. This paper describes the use of an adhesive-coated biologic scaffold to augment primary suture repair of transected Achilles tendons. The adhesive portion consisted of a synthetic mimic of mussel adhesive proteins that can adhere to various surfaces in a wet environment, including biologic tissues. When combined with biologic scaffolds such as bovine pericardium or porcine dermal tissues, these adhesive constructs demonstrated lap shear adhesive strengths significantly greater than that of fibrin glue, while reaching up to 60% of the strength of a cyanoacrylate-based adhesive. These adhesive constructs were wrapped around transected cadaveric porcine Achilles tendons repaired with a combination of parallel and three-loop suture patterns. Tensile mechanical testing of the augmented repairs exhibited significantly higher stiffness (22-34%), failure load (24-44%), and energy to failure (27-63%) when compared to control tendons with suture repair alone. Potential clinical implications of this novel adhesive biomaterial are discussed.

Enhanced adhesion of dopamine methacrylamide elastomers via viscoelasticity tuning

We present a study on the effects of cross-linking on the adhesive properties of bio-inspired 3,4-dihydroxyphenylalanine (DOPA). DOPA has a unique catechol moiety found in adhesive proteins in marine organisms, such as mussels and polychaete, which results in strong adhesion in aquatic conditions. Incorporation of this functional group in synthetic polymers provides the basis for pressure-sensitive adhesives for use in a broad range of environments. A series of cross-linked DOPA-containing polymers were prepared by adding divinyl cross-linking agent ethylene glycol dimethacrylate (EGDMA) to monomer mixtures of dopamine methacrylamide (DMA) and 2-methoxyethyl acrylate (MEA). Samples were prepared using a solvent-free microwave-assisted polymerization reaction and compared to a similar series of cross-linked MEA materials. Cross-linking with EGDMA tunes the viscoelastic properties of the adhesive material and has the advantage of not reacting with the catechol group that is responsible for the excellent adhesive performance of this material. Adhesion strength was measured by uniaxial indentation tests, which indicated that 0.001 mol % of EGDMA-cross-linked copolymer showed the highest work of adhesion in dry conditions, but non-cross-linked DMA was the highest in wet conditions. The results suggest that there is an optimal cross-linking degree that displays the highest adhesion by balancing viscous and elastic behaviors of the polymer but this appears to depend on the conditions. This concentration of cross-linker is well below the theoretical percolation threshold, and we propose that subtle changes in polymer viscoelastic properties can result in significant improvements in adhesion of DOPA-based materials. The properties of lightly cross-linked poly(DMA-co-MEA) were investigated by measurement of the frequency dependence of the storage modulus (G') and loss modulus (G''). The frequency-dependence of G' and magnitude of G'' showed gradual decreases with the fraction of EGDMA. Loosely cross-linked DMA copolymers, containing 0% and 0.001 mol % of EGDMA-cross-linked copolymers, displayed rheological behavior appropriate for pressure-sensitive adhesives characterized by a higher G' at high frequencies and lower G' at low frequencies. Our results indicate that dimethacrylate cross-linking of DMA copolymers can be used to enhance the adhesive properties of this unique material.

Adhesive performance of biomimetic adhesive-coated biologic scaffolds

Surgical repair of a discontinuity in traumatized or degenerated soft tissues is traditionally accomplished using sutures. A current trend is to reinforce this primary repair with surgical grafts, meshes, or patches secured with perforating mechanical devices (i.e., sutures, staples, or tacks). These fixation methods frequently lead to chronic pain and mesh detachment. We developed a series of biodegradable adhesive polymers that are synthetic mimics of mussel adhesive proteins (MAPs), composed of 3,4-dihydroxyphenylalanine (DOPA)-derivatives, polyethylene glycol (PEG), and polycaprolactone (PCL). These polymers can be cast into films, and their mechanical properties, extent of swelling, and degradation rate can be tailored through the composition of the polymers as well as blending with additives. When coated onto a biologic mesh used for hernia repair, these adhesive constructs demonstrated adhesive strengths significantly higher than fibrin glue. With further development, a precoated bioadhesive mesh may represent a new surgical option for soft tissue repair.

Polymerizable biomimetic vesicles with controlled local presentation of adhesive functional DOPA groups

Inspired by strong adhesive properties of mussel footprint proteins, which are largely governed by the presence of dihydroxy-phenylalanine (DOPA) amino acid moieties, we present a novel approach for presenting DOPA groups in a very defined way in order to modulate the adhesion between artificial interfaces. To this end, linear peptide amphiphiles are synthesized with attached DOPA functional groups and a polymerizable diacetylenic tail. The obtained amphiphiles can be coassembled with matrix amphiphiles into vesicles, which can be subsequently stabilized through UV-light-induced solid-state polymerization. Depending on the molar ratio of matrix and adhesive amphiphiles, the vesicles self-assemble into spherical, fibrilar, or planar nanostructures. The adhesive properties of the surface-adsorbed vesicles are evaluated by drop casting them onto a planar solid substrate and performing macroscopic shear tests in contact with a similar substrate. The shear forces are investigated as a function of substrate chemistry, vesicle polymerization conditions, vesicle concentration, and number of adhesive DOPA groups in the interface. Substrate adhesion is enhanced by surface-confined vesicles and greatly depends on the presentation of DOPA groups in the adhesive interface, either as a mono- or multilayer conformation. Because the adhesive structures can be transferred onto substrates from low-viscosity aqueous solution, they may serve as interesting nanoscale gluing pads in future applications, where the high viscosity of polymer-based glues renders the controlled formation of nanoscale adhesion pads difficult.

A bioinspired wet/dry microfluidic adhesive for aqueous environments

A pressure-sensitive, nonreacting and nonfouling adhesive which can perform well both in air and underwater is very desirable because of its potential applications in various settings such as biomedical, marine, and automobile. Taking a clue from nature that many natural adhesive pads have complex structures underneath the outer adhesive layer, we have prepared thin elastic adhesive films with subsurface microstructures using PDMS (poly(dimethylsiloxane)) and investigated their performance underwater. The presence of embedded structure enhances the energy of adhesion considerably both in air and underwater. Furthermore, filling the channels with liquid of suitable surface tension modifies the internal stress profile, resulting into significant enhancement in adhesive performance. As this increase in adhesion is mediated by mechanics and not by surface chemistry, the presence of water does not alter its performance much. For the same reason, this adhesion mechanism works with both hydrophobic and hydrophilic surfaces. The adhesive can be reused because of its elastic surface. Moreover, unlike many other present-day adhesives, its performance does not decrease with time.

Self-assembly of poly(ethylene glycol)-poly(alkyl phosphonate) terpolymers on titanium oxide surfaces: synthesis, interface characterization, investigation of nonfouling properties, and long-term stability

This contribution deals with the self-assembling of a terpolymer on titanium oxide (TiO(2)) surface. The polymer structure was obtained by polymerization of different methacrylates, i.e., alkyl-phosphonated, butyl and PEG methacrylate, in the presence of a chain transfer agent. The resulting PEG-poly(alkyl phosphonate) material, characterized mainly by SEC and NMR, self-organized at the interface of TiO(2). AR-XPS demonstrated the binding of phosphonate groups to TiO(2) substrate and the formation of a PEG-brush layer at the outermost part of the system. The stability of this terpolymer adlayer, after exposure to solutions of pH 2, 7.4, and 9 up to 3 weeks, was evaluated quantitatively by XPS and ellipsometry. We demonstrated an overall stability improvements of this coating against desorption in contact with aqueous solutions in comparison with reference self-assembly systems. Finally, the PEG-terpolymer adlayer proved to impart to TiO(2) substrate antifouling properties when exposed to full blood serum.

Fabrication and biocompatibility investigation of TiO(2) films on the polymer substrates obtained via a novel and versatile route

Titanium oxide (TiO(2)) films were successfully deposited onto the polymer substrates of polytetrafluoroethylene (PTFE), polyethylene (PE), and polyethylene terephthalate (PET), which were pre-modified with polydopamine coating (polydopamine and its coating are coded as PDA and PDAc, respectively), by a simple liquid phase deposition (LPD) process. The morphology and chemical state of the obtained TiO(2) films were characterized by field emission scanning electron microscope (FE-SEM) and X-ray photoelectron spectroscopy (XPS), respectively. Subsequently, the biocompatibility of the samples was investigated by 3-(4,5-dimethyldiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) colorimetric assay and acridine orange staining of MC-3T3 osteoblast cells, and the results demonstrated that the fabricated TiO(2) films could markedly improve the in vitro cytocompatibility. So, the presented route is anticipated to be a promising surface modification methodology to improve the practical outcome of the implanted materials for its versatility and validity.