Mixing a sol and a precipitate of block copolymers with different block ratios leads to an injectable hydrogel

Selenium-containing thermogel for controlled drug delivery by coordination competition

A coordination-responsive selenium-containing thermogel was designed and synthesized for controlled cisplatin delivery by competitive coordination of glutathione, which broadens the strategy of tuning drug release using thermogelling systems.

5-Fluorouracil loaded thermosensitive PLGA–PEG–PLGA hydrogels for the prevention of postoperative tendon adhesion

Thermosensitive PLGA–PEG–PLGA hydrogels containing 5-fluorouracil were applied to cover the sutured Achilles tendon of rats, leading to a significant reduction in adhesion formation during the tendon healing.

Modular composite hydrogels from cholesterol-functionalized polycarbonates for antimicrobial applications

A modular and versatile approach of mixing pre-optimized functional components with ABA-triblock gelators to access drug-loaded or antimicrobial gel is presented.

An injectable thermogel with high radiopacity

An injectable thermogel with high X-ray opacity was designed and synthesized for the first time and such a system shows great potential in non-invasive diagnosis and therapy.

Thermogelling polymer-platinum(IV) conjugates for long-term delivery of cisplatin

In this study, we suggest a novel strategy of constituting an in situ-formed hydrogel composed of polymer-platinum(IV) conjugate to realize a long-term delivery of cisplatin. A unique conjugate was designed and synthesized by covalent linking of Pt(IV) complex to the hydrophobic end of two methoxyl poly(ethylene glycol)-b-poly(d,l-lactide) (mPEG-PLA) copolymer chains, resulting in the formation of Bi(mPEG-PLA)-Pt(IV). The conjugate could self-assemble into micelles in water, and its concentrated solution exhibited a thermoreversible sol-gel transition and formed a semisolid thermogel at body temperature. The incorporation of the cisplatin analogue Pt(IV) prodrug into the conjugate had a significant influence on its thermogelling properties and the conjugate thermogelation was attributed to the micellar aggregation. In vitro release experiments of Pt(IV)-conjugated thermogel showed that the platinum release lasted as long as two months. Furthermore, we demonstrated that the Pt(IV) prodrug was released mainly in the form of micelles and micellar aggregates from the gel depot. Compared with free cisplatin, the formation of conjugate micelles led to the enhanced in vitro cytotoxicity against cancer cells due to the effective accumulation into cells via endocytosis.

PLK1shRNA and doxorubicin co-loaded thermosensitive PLGA-PEG-PLGA hydrogels for osteosarcoma treatment

Combination cancer therapy has emerged as crucial approach for achieving superior anti-cancer efficacy. In this study, we developed a strategy by localized co-delivery of PLK1shRNA/polylysine-modified polyethylenimine (PEI-Lys) complexes and doxorubicin (DOX) using biodegradable, thermosensitive PLGA-PEG-PLGA hydrogels for treatment of osteosarcoma. When incubated with osteosarcoma Saos-2 and MG-63 cells, the hydrogel containing PLK1shRNA/PEI-Lys and DOX displayed significant synergistic effects in promoting the apoptosis of osteosarcoma cells in vitro. After subcutaneous injection of the hydrogel containing PLK1shRNA/PEI-Lys and DOX beside the tumors of nude mice bearing osteosarcoma Saos-2 xenografts, the hydrogels exhibited superior antitumor efficacy in vivo compared to the hydrogels loaded with PLK1shRNA/PEI-Lys or DOX alone. It is noteworthy that the combination treatment in vivo led to almost complete suppression of tumor growth up to 16 days, significantly enhanced PLK1 silencing, higher apoptosis of tumor masses, as well as increased cell cycle regulation. Additionally, ex vivo histological analysis of major organs of the mice indicated that the localized treatments showed no obvious damage to the organs, suggesting lower systemic toxicity of the treatments. Therefore, the strategy of localized, sustained co-delivery of PLK1shRNA and DOX by using the biodegradable, injectable hydrogel may have potential for efficient clinical treatment of osteosarcoma.

Poly(lactic acid-co-glycolic acid)-poly(ethylene glycol)-poly(lactic acid-co-glycolic acid) thermogel as a novel submucosal cushion for endoscopic submucosal dissection

Endoscopic submucosal dissection (ESD) is a clinical therapy for early stage neoplastic lesions in the gastrointestinal tract. It is, however, faced with a crucial problem: the high occurrence of perforation. The formation of a submucosal fluid cushion (SFC) via a fluid injection is the best way to avoid perforation, and thus an appropriate biomaterial is vital for this minimally invasive endoscopic technique. In this study, we introduced an injectable thermogel as a novel submucosal injection substance in ESD. The hydrogel synthesized by us was composed of poly(lactic acid-co-glycolic acid)-poly(ethylene glycol)-poly(lactic acid-co-glycolic acid) (PLGA-PEG-PLGA) triblock copolymers. The polymer/water system was a low-viscosity fluid at room temperature and thus easily injected, and turned into a non-flowing gel at body temperature after injection. The submucosal injection of the thermogel to create SFCs was performed in both resected porcine stomachs and living minipigs. High mucosal elevation with a clear margin was maintained for a long duration. Accurate en bloc resection was achieved with the assistance of the thermogel. The mean procedure time was strikingly reduced. Meanwhile, no obvious bleeding, perforation and tissue damage were observed. The application of the thermogel not only facilitated the ESD procedure, but also increased the efficacy and safety of ESD. Therefore, the PLGA-PEG-PLGA thermogel provides an excellent submucosal injection system, and has great potential to improve the ESD technique significantly.

Development of lipid-shell and polymer core nanoparticles with water-soluble salidroside for anti-cancer therapy

Salidroside (Sal) is a potent antitumor drug with high water-solubility. The clinic application of Sal in cancer therapy has been significantly restricted by poor oral absorption and low tumor cell uptake. To solve this problem, lipid-shell and polymer-core nanoparticles (Sal-LPNPs) loaded with Sal were developed by a double emulsification method. The processing parameters including the polymer types, organic phase, PVA types and amount were systemically investigated. The obtained optimal Sal-LPNPs, composed of PLGA-PEG-PLGA triblock copolymers and lipids, had high entrapment efficiency (65%), submicron size (150 nm) and negatively charged surface (−23 mV). DSC analysis demonstrated the successful encapsulation of Sal into LPNPs. The core-shell structure of Sal-LPNPs was verified by TEM. Sal released slowly from the LPNPs without apparent burst release. MTT assay revealed that 4T1 and PANC-1 cancer cell lines were sensitive to Sal treatment. Sal-LPNPs had significantly higher antitumor activities than free Sal in 4T1 and PANC-1 cells. The data indicate that LPNPs are a promising Sal vehicle for anti-cancer therapy and worthy of further investigation.

Effects of l-lactide and d,l-lactide in poly(lactide-co-glycolide)-poly(ethylene glycol)-poly(lactide-co-glycolide) on the bulk states of triblock copolymers, and their thermogellation and biodegradation in water

In this study, the effects of l-lactide and d,l-lactide on the thermogelling and biodegradation behaviors of PLGA-PEG-PLGA copolymers were revealed.

Comparative studies of thermogels in preventing post-operative adhesions and corresponding mechanisms

Thermogelling PLGA–PEG–PLGA, PCGA–PEG–PCGA, and PCL–PEG–PCL triblock copolymers and their efficacies of prevention of post-surgical peritoneal adhesions in rabbits were investigated and compared.

Cell-material interactions revealed via material techniques of surface patterning

Cell-material interactions constitute a key fundamental topic in biomaterials study. Various cell cues and matrix cues as well as soluble factors regulate cell behaviors on materials. These factors are coupled with each other as usual, and thus it is very difficult to unambiguously elucidate the role of each regulator. The recently developed material techniques of surface patterning afford unique ways to reveal the underlying science. This paper reviews the pertinent material techniques to fabricate patterns of microscale and nanoscale resolutions, and corresponding cell studies. Some issues are emphasized, such as cell localization on patterned surfaces of chemical contrast, and effects of cell shape, cell size, cell-cell contact, and seeding density on differentiation of stem cells. Material cues to regulate cell adhesion, cell differentiation and other cell events are further summed up. Effects of some physical properties, such as surface topography and matrix stiffness, on cell behaviors are also discussed; nanoscaled features of substrate surfaces to regulate cell fate are summarized as well. The pertinent work sheds new insight into the cell-material interactions, and is stimulating for biomaterial design in regenerative medicine, tissue engineering, and high-throughput detection, diagnosis, and drug screening.

Synthesis, characterization, biodegradability and biocompatibility of a temperature-sensitive PBLA-PEG-PBLA hydrogel as protein delivery system with low critical gelation concentration

Temperature-sensitive hydrogels were designed using a series of A-B-A triblock copolymers consisting of poly (ethylene glycol) (PEG) with different molecular weights as the hydrophilic block B and poly (β-butyrolactone-co-lactic acid)(PBLA) with varying block lengths and composition as the hydrophobic block A. The triblock copolymers were synthesized by ring-opening polymerization (ROP) of β-BL and LA in bulk using PEG as an initiator and Sn(Oct)2 as the catalyst. Their chemical structure and molecular characteristics were determined by NMR, GPC and DSC, and the relationship between structure and phase behaviors in aqueous solutions was investigated as well. It was found that the phase behaviors in aqueous solutions including critical micelle concentration (CMC), sol-gel-sedimentation phase transition temperature, gel window width and critical gelation concentration (CGC) are largely dependent on the molecular weight and block length ratio of PEG/PBLA. Most importantly, they show a very low CGC ranging from 4 to 8 wt% because of the introduction of β-BL. Furthermore, the biodegradability and biocompatibility of the hydrogels were evaluated. Finally, lysozyme as a model protein was used to evaluate the ability to deliver protein drugs in a sustained release manner and biologically active form. All results demonstrated that the temperature-sensitive in situ forming hydrogel has a promising potential as sustained delivery system for protein drugs.

A long-acting formulation of a polypeptide drug exenatide in treatment of diabetes using an injectable block copolymer hydrogel

This study is aimed to develop a long-acting injectable formulation in treatment of type II diabetes. A glucoregulatory polypeptide, exenatide (EXT), was chosen as the model drug, and an aqueous block copolymer system with a sol-gel transition upon the increase of temperature was selected as the delivery matrix of EXT. The thermoreversible hydrogel composed of poly(lactic acid-co-glycolic acid)-poly(ethylene glycol)-poly(lactic acid-co-glycolic acid) (PLGA-PEG-PLGA) triblock copolymers was found to slower the degradation of the polypeptide to a large extent. However, the initial formulation in this study exhibited a significant drug burst effect, which is a common problem to load a hydrophilic small or medium-size polypeptide into a hydrogel. Zinc acetate was then introduced to slow down the EXT release by formation of insoluble Zn-EXT complexes in the thermogel matrix. Yet an incomplete release became another crucial problem, which is also common for peptide and protein delivery. The synergistic effect of three excipients (zinc acetate, PEG, and sucrose) under an appropriate condition overcame these two problems simultaneously, and the sustained release of drug lasted for 1 week. In vivo experiments via mice oral glucose tolerance tests demonstrated an improved glucose tolerance for 1 week after a single subcutaneous injection of the optimal EXT formulation. As a result, a formulation of antidiabetic drugs was set up, and meanwhile a strategy using synergistic excipients to adjust release profiles of peptides from hydrogels was put forward.

Modulating rheological and degradation properties of temperature-responsive gelling systems composed of blends of PCLA-PEG-PCLA triblock copolymers and their fully hexanoyl-capped derivatives

In this study, the ability to modulate rheological and degradation properties of temperature-responsive gelling systems composed of aqueous blends of poly(ε-caprolactone-co-lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone-co-lactide) (PCLA-PEG-PCLA) triblock copolymers (i.e. uncapped) and their fully capped derivatives was investigated. Uncapped and capped PCLA-PEG-PCLA triblock copolymers, abbreviated as degree of modification 0 and 2 (DM0 and DM2, respectively), were composed of identical PCLA and PEG blocks but different end groups: namely hydroxyl and hexanoyl end groups. DM0 was synthesized by ring opening polymerization of l-lactide and ε-caprolactone in toluene using PEG as initiator and tin(II) 2-ethylhexanoate as the catalyst. A portion of DM0 was subsequently reacted with an excess of hexanoyl chloride in solution to yield DM2. The cloud point and phase behaviour of DM0 and DM2 in buffer as well as that of their blends were determined by light scattering in a diluted state and by vial tilting and rheological measurements in a concentrated state. Degradation/dissolution properties of temperature-responsive gelling systems were studied in vitro at pH 7.4 and 37°C. The cloud points of DM0/DM2 blends were ratio-dependent and could be tailored from 15 to 40°C for blends containing 15 to 100wt.% DM0. Vial tilting and rheological experiments showed that, with solid contents between 20 and 30wt.%, DM0/DM2 blends (15/85 to 25/75w/w) had a sol-to-gel transition temperature at 10-20°C, whereas blends with less than 15wt.% DM0 formed gels below 4°C and the ones with more than 25wt.% DM0 did not show a sol-to-gel transition up to 50°C. Complete degradation of temperature-responsive gelling systems took ∼100days, independent of the DM0 fraction and the initial solid content. Analysis of residual gels in time by GPC and (1)H-NMR showed no chemical polymer degradation, but indicated gel degradation by dissolution. Preferential dissolution of lactoyl-rich polymers induced enrichment of the residual gels in caproyl-rich polymers. To the best of our knowledge, degradation of temperature-responsive gelling systems by dissolution has not been reported or hypothesized as being the consequence of acylation of polymers. In conclusion, blending of PCLA-PEG-PCLA triblock polymers composed of identical backbones but different end groups provides for a straightforward preparation of temperature-responsive gelling systems with well-characterized rheological properties and potential in drug delivery. Furthermore, acylation of triblock copolymers may allow for the design of bioerodible systems with control over degradation by polymer dissolution.

Injectable hydrogel as stem cell scaffolds from the thermosensitive terpolymer of NIPAAm/AAc/HEMAPCL

A series of biodegradable thermosensitive copolymers was synthesized by free radical polymerization with N-isopropylacrylamide (NIPAAm), acrylic acid (AAc) and macromer 2-hydroxylethyl methacrylate-poly(ɛ-caprolactone) (HEMAPCL). The structure and composition of the obtained terpolymers were confirmed by proton nuclear magnetic resonance spectroscopy, while their molecular weight was measured using gel permeation chromatography. The copolymers were dissolved in phosphate-buffered saline (PBS) solution (pH = 7.4) with different concentrations to prepare hydrogels. The lower critical solution temperature (LCST), cloud point, and rheological property of the hydrogels were determined by differential scanning calorimetry, ultraviolet-visible spectrometry, and rotational rheometry, respectively. It was found that LCST of the hydrogel increased significantly with the increasing NIPAAm content, and hydrogel with higher AAc/HEMAPCL ratio exhibited better storage modulus, water content, and injectability. The hydrogels were formed by maintaining the copolymer solution at 37°C. The degradation experiment on the formed hydrogels was conducted in PBS solution for 2 weeks and demonstrated a less than 20% weight loss. Scanning electron microscopy was also used to study the morphology of the hydrogel. The copolymer with NIPAAm/AAc/HEMAPCL ratio of 88:9.6:2.4 was bioconjugated with type I collagen for the purpose of biocompatibility enhancement. In-vitro cytotoxicity of the hydrogels both with and without collagen was also addressed.

Enhancement of the fraction of the active form of an antitumor drug topotecan via an injectable hydrogel

Poly(D,L-lactic acid-co-glycolic acid)-b-poly(ethylene glycol)-b-poly(D,L-lactic acid-co-glycolic acid) (PLGA-PEG-PLGA) hydrogels were tried as implants to encapsulate antitumor drug topotecan (TPT), a derivative of camptothecin (CPT). Despite of water solubility of TPT, the in vitro release of this low-molecular-weight drug from hydrogels sustained for 5 days with only a mild initial burst. The antitumor efficacy of the released TPT was further validated in S180-bearing mice. Surprisingly, the fraction of the active lactone form of TPT was increased to above 50% in the hydrogel matrix, while the fraction was just about 10% in phosphate buffer saline under physiological pH at 37°C. This significant effect was interpreted not by the local acidic pH within the hydrogel, but by the increase of pK(a) of the carboxylate group of the open-ring form due to the hydrophobic interaction between the amphiphilic polymer and TPT. Theoretical analysis via a pK(a)-related mechanism was also performed, which was consistent with our experimental measurements. Hence, this study has revealed that an appropriate biomaterial could, via drug-material interactions, enhance the drug efficacy by increasing the active fraction of some drugs which exhibit a reversible conversion between the active and inactive structures.

Anisotropic self-assembling micelles prepared by the direct dissolution of PLA/PEG block copolymers with a high PEG fraction

A series of polylactide-poly(ethylene glycol) (PLA-PEG) block copolymers with a high PEG fraction were synthesized by the ring-opening polymerization of L- or D-lactide in the presence of mono- or dihydroxyl PEG using nontoxic zinc lactate as a catalyst. Micelles were then prepared by direct dissolution of the obtained water-soluble copolymers in an aqueous medium without heating or using any organic solvents. Large anisotropic micelles instead of conventional spherical ones were observed from a transmission electron microscopy examination. Various parameters influencing the structure of the novel micelles were considered, such as the copolymer chain structure, molar mass, PEG fraction, copolymer concentration, and stereocomplexation between L- and D-PLA blocks. Anisotropic micelles were obtained for both diblock and triblock copolymers but vanished with increasing molar mass of the copolymers. The morphology of micelles strongly depends on the PEG fraction. Anisotropic micelles were found only in an intermediate EO/LA ratio range in which a higher PEG fraction leads to a higher length/width ratio of micelles. Stereocomplexation between L- and D-PLA or a lower concentration disfavors the formation of anisotropic micelles. Under appropriate concentrations, spherical and anisotropic micelles coexist in the same micellar solution. Moreover, it was found that anisotropic micelles are susceptible to further self-assemble into more organized complex aggregates. Similar results were obtained from light scattering and aqueous gel permeation chromatography measurements. A novel model is proposed to explain the formation of anisotropic micelles and the effects of various parameters on the structure of micelles in an aqueous medium.

Biodegradable and thermoreversible PCLA-PEG-PCLA hydrogel as a barrier for prevention of post-operative adhesion

Biodegradable polymers can serve as barriers to prevent the post-operative intestinal adhesion. Herein, we synthesized a biodegradable triblock copolymer poly(ɛ-caprolactone-co-lactide)-b-poly(ethylene glycol)-b-poly(ɛ-caprolactone-co-lactide) (PCLA-PEG-PCLA). The concentrated polymeric aqueous solution was injectable, and a hydrogel could be rapidly formed due to percolation of a self-assembled micelle network at the body temperature without requirement of any chemical reactions. This physical hydrogel retained its integrity in vivo for a bit more than 6 weeks and was eventually degraded due to hydrolysis. The synthesized polymer exhibited little cytotoxicity and hemolysis; the acute inflammatory response after implanting the hydrogel was acceptable, and the degradation products were less acidic than those of other polyester-containing materials. A rabbit model of sidewall defect-bowel abrasion was employed, and a significant reduction of post-operative peritoneal adhesion has been found in the group of in situ formed PCLA-PEG-PCLA hydrogels.

Critical areas of cell adhesion on micropatterned surfaces

The adhesive area is important to modulate cell behaviors on a substrate. This paper aims to semi-quantitatively examine the existence of the characteristic areas of cell adhesion on the level of individual cells. We prepared a series of micropatterned surfaces with adhesive microislands of various sizes on an adhesion-resistant background, and cultured cells of MC3T3-E1 (osteoblast), BMSC (bone mesenchymal stem cell) or NIH3T3 (fibroblast) on those modeled surfaces. We have defined seven characteristic areas of an adhesive microisland and confirmed that they are meaningful to describe cell adhesion behaviors. Those parameters are (1) the critical adhesion area from apoptosis to survival denoted as A∗ or A(c₁), (2) the critical area from adhesion of a single cell to adhesion of multiple cells (A(c₂)), (3) the basic area for one more cell to adhere (A(Δ)), (4) and (5) the characteristic areas of a microisland most probably occupied by one cell (A(peak₁) and two cells (A(peak₂)), (6) and (7) the characteristic areas of a microisland occupied by one cell (A(N₁)) or two cells (A(N₂)) on average. Besides the introduction of those basic parameters, the present paper demonstrates how to determine them experimentally. We further discussed the relationship between those characteristic areas and the spreading area on a non-patterned adhesive surface.