Femtochemistry at metal surfaces: nonadiabatic reaction dynamics

Plasmonic hot electrons for sensing, photodetection, and solar energy applications: A perspective

In plasmonic metals, surface plasmon resonance decays and generates hot electrons and hot holes through non-radiative Landau damping. These hot carriers are highly energetic, which can be modulated by the plasmonic material, size, shape, and surrounding dielectric medium. A plasmonic metal nanostructure, which can absorb incident light in an extended spectral range and transfer the absorbed light energy to adjacent molecules or semiconductors, functions as a "plasmonic photosensitizer." This article deals with the generation, emission, transfer, and energetics of plasmonic hot carriers. It also describes the mechanisms of hot electron transfer from the plasmonic metal to the surface adsorbates or to the adjacent semiconductors. In addition, this article highlights the applications of plasmonic hot electrons in photodetectors, photocatalysts, photoelectrochemical cells, photovoltaics, biosensors, and chemical sensors. It discusses the applications and the design principles of plasmonic materials and devices.

Insights into plasmon induced keto-enol isomerization

Chemical reactions that are driven by plasmon-induced hot carriers are a timely topic of interest to chemists and material scientists as they provide catalytic alternatives that may reduce cost and/or waste. Herein, we monitored the localized surface plasmon resonance-induced keto-enol isomerization process of 2-mercapto-4(3H)-quinazolinone (MQ) by time-dependent surface enhanced Raman scattering (SERS), where the MQ molecules are adsorbed on gold nanoparticles (GNP) surface by Au-S bonds. The mechanism of keto-enol isomerization has been successfully investigated, and it is found that the isomerization is induced by hot hole transfer from GNPs to the adsorbed molecules. The present investigation could provide significant insights into hot hole catalyzed chemical reactions via SERS spectra and theoretical calculations.

Time-resolved observation of transient precursor state of CO on Ru(0001) using carbon K-edge spectroscopy

The transient dynamics of carbon monoxide (CO) molecules on a Ru(0001) surface following femtosecond optical laser pump excitation has been studied by monitoring changes in the unoccupied electronic structure using an ultrafast X-ray free-electron laser (FEL) probe. The particular symmetry of perpendicularly chemisorbed CO on the surface is exploited to investigate how the molecular orientation changes with time by varying the polarization of the FEL pulses. The time evolution of spectral features corresponding to the desorption precursor state was well distinguished due to the narrow line-width of the C K-edge in the X-ray absorption (XA) spectrum, illustrating that CO molecules in the precursor state rotated freely and resided on the surface for several picoseconds. Most of the CO molecules trapped in the precursor state ultimately cooled back down to the chemisorbed state, while we estimate that ∼14.5 ± 4.9% of the molecules in the precursor state desorbed into the gas phase. It was also observed that chemisorbed CO molecules diffused over the metal surface from on-top sites toward highly coordinated sites. In addition, a new "vibrationally hot precursor" state was identified in the polarization-dependent XA spectra.

Interfacial Hydrogen-Bonding Dynamics in Surface-Facilitated Dehydrogenation of Water on TiO2(110)

Molecular-level understanding of the dehydrogenation of interfacial water molecules on metal oxides and their interactive nature relies on the ability to track the motion of light and small hydrogen atoms, which is known to be difficult. Here, we report precise measurements of the surface-facilitated water dehydrogenation process at terminal Ti sites of TiO₂(110) using scanning tunneling microscopy. Our measured hydrogen-bond dynamics of H₂O and D₂O reveal that the vibrational and electronic excitations dominate the sequential transfer of two H (D) atoms from a H₂O (D₂O) molecule to adjacent surface oxygen sites, manifesting the active participation of the oxide surface in the dehydrogenation processes. Our results show that, at the stoichiometric Ti_5c sites, individual H₂O molecules are energetically less stable than the dissociative form, where a barrier is expected to be as small as approximately 70-120 meV on the basis of our experimental and theoretical results. Moreover, our results reveal that interfacial hydrogen bonds can effectively assist H atom transfer and exchange across the surface. The revealed quantitative hydrogen-bond dynamics provide a new atomistic mechanism for water interactions on metal oxides in general.

How Peptides Dissociate in Plasmonic Hot Spots

Plasmon-induced hot carriers enable dissociation of strong chemical bonds by visible light. This unusual chemistry has been demonstrated for several diatomic and small organic molecules. Here, the scope of plasmon-driven photochemistry is extended to biomolecules and the reactivity of proteins and peptides in plasmonic hot spots is described. Tip-enhanced Raman spectroscopy (TERS) is used to both drive the reactions and to monitor their products. Peptide backbone bonds are found to dissociate in the hot spot, which is reflected in the disappearance of the amide I band in the TER spectra. The observed fragmentation pathway involves nonthermal activation, presumably by dissociative capture of a plasmon-induced hot electron. This fragmentation pathway is known from electron transfer dissociation (ETD) of peptides in gas-phase mass spectrometry (MS), which suggests a general similarity between plasmon-induced photochemistry and nonergodic reactions triggered by electron capture. This analogy may serve as a design principle for plasmon-induced reactions of biomolecules.

Electrons and Phonons Cooperate in the Laser-Induced Desorption of CO from Pd(111)

Femtosecond laser induced desorption of CO from a CO-covered Pd(111) surface is investigated with ab initio molecular dynamics with electronic friction that incorporates effects due to the excited electronic and phononic systems, as well as out-of-phase coadsorbate interactions. Our simulations show evidence of an important electron-phonon synergy in promoting CO desorption that has largely been neglected in other similar systems. At the saturated coverage of 0.75 ML, effects due to CO-CO interadsorbate energy exchange are also important. Our dynamics simulations, in concert with site-specific desorption energy calculations, allow us to understand the large coverage dependence of the desorption yields observed in experiments.

Disentangling charge carrier from photothermal effects in plasmonic metal nanostructures

Plasmon-mediated chemical reactions (PMCRs) constitute a vibrant research field, advancing such goals as using sunlight to convert abundant precursors such as CO₂ and water to useful fuels and chemicals. A key question in this burgeoning field which has not, as yet, been fully resolved, relates to the precise mechanism through which the energy absorbed through plasmonic excitation, ultimately drives such reactions. Among the multiple processes proposed, two have risen to the forefront: plasmon-increased temperature and generation of energetic charge carriers. However, it is still a great challenge to confidently separate these two effects and quantify their relative contribution to chemical reactions. Here, we describe a strategy based on the construction of a plasmonic electrode coupled with photoelectrochemistry, to quantitatively disentangle increased temperature from energetic charge carriers effects. A clear separation of the two effects facilitates the rational design of plasmonic nanostructures for efficient photochemical applications and solar energy utilization.

Confidently separating the photothermal effect from the generation of energetic charge carriers and quantifying their relative contribution to chemical reactions remain a great challenge in plasmon-mediated chemical reactions. Here, authors describe a strategy based on the construction of a plasmonic electrode coupled with photoelectrochemistry to quantitatively disentangle these two effects.

Reactive and Nonreactive Scattering of HCl from Au(111): An Ab Initio Molecular Dynamics Study

The HCl + Au(111) system has recently become a benchmark for highly activated dissociative chemisorption, which presumably is strongly affected by electron-hole pair excitation. Previous dynamics calculations, which were based on density functional theory at the generalized gradient approximation level (GGA-DFT) for the molecule-surface interaction, have all overestimated measured reaction probabilities by at least an order of magnitude. Here, we perform ab initio molecular dynamics (AIMD) and AIMD with electronic friction (AIMDEF) calculations employing a density functional that includes the attractive van der Waals interaction. Our calculations model the simultaneous and possibly synergistic effects of surface temperature, surface atom motion, electron-hole pair excitation, the molecular beam conditions of the experiments, and the van der Waals interaction on the reactivity. We find that reaction probabilities computed with AIMDEF and the SRP32-vdW functional still overestimate the measured reaction probabilities, by a factor 18 for the highest incidence energy at which measurements were performed (≈2.5 eV). Even granting that the experiment could have underestimated the sticking probability by about a factor three, this still translates into a considerable overestimation of the reactivity by the current theory. Likewise, scaled transition probabilities for vibrational excitation from ν = 1, j = 1 to ν = 2 are overestimated by the AIMDEF theory, by factors 3-8 depending on the initial conditions modeled. Energy losses to the surface and translational energy losses are, however, in good agreement with experimental values.

Unearthing the factors governing site specific rates of electronic excitations in multicomponent plasmonic systems and catalysts

Direct electronic transitions act as a preferential dissipation pathway for plasmon energy in multicomponent plasmonic systems.

Atom-specific activation in CO oxidation

We report on atom-specific activation of CO oxidation on Ru(0001) via resonant X-ray excitation. We show that resonant 1s core-level excitation of atomically adsorbed oxygen in the co-adsorbed phase of CO and oxygen directly drives CO oxidation. We separate this direct resonant channel from indirectly driven oxidation via X-ray induced substrate heating. Based on density functional theory calculations, we identify the valence-excited state created by the Auger decay as the driving electronic state for direct CO oxidation. We utilized the fresh-slice multi-pulse mode at the Linac Coherent Light Source that provided time-overlapped and 30 fs delayed pairs of soft X-ray pulses and discuss the prospects of femtosecond X-ray pump X-ray spectroscopy probe, as well as X-ray two-pulse correlation measurements for fundamental investigations of chemical reactions via selective X-ray excitation.

Plasmon-Driven Photocatalysis Leads to Products Known from E-beam and X-ray-Induced Surface Chemistry

Plasmonic metal nanostructures can concentrate incident optical fields in nanometer-sized volumes, called hot spots. This leads to enhanced optical responses of molecules in such a hot spot but also to chemical transformations, driven by plasmon-induced hot carriers. Here, we employ tip-enhanced Raman spectroscopy (TERS) to study the mechanism of these reactions in situ at the level of a single hot spot. Direct spectroscopic measurements reveal the energy distribution of hot electrons, as well as the temperature changes due to plasmonic heating. Therefore, charge-driven reactions can be distinguished from thermal reaction pathways. The products of the hot-carrier-driven reactions are strikingly similar to the ones known from X-ray or e-beam-induced surface chemistry despite the >100-fold energy difference between visible and X-ray photons. Understanding the analogies between those two scenarios implies new strategies for rational design of plasmonic photocatalytic reactions and for the elimination of photoinduced damage in plasmon-enhanced spectroscopy.

Quantifying hot carrier and thermal contributions in plasmonic photocatalysis

Photocatalysis based on optically active, “plasmonic” metal nanoparticles has emerged as a promising approach to facilitate light-driven chemical conversions under far milder conditions than thermal catalysis. However, an understanding of the relation between thermal and electronic excitations has been lacking. We report the substantial light-induced reduction of the thermal activation barrier for ammonia decomposition on a plasmonic photocatalyst. We introduce the concept of a light-dependent activation barrier to account for the effect of light illumination on electronic and thermal excitations in a single unified picture. This framework provides insight into the specific role of hot carriers in plasmon-mediated photochemistry, which is critically important for designing energy-efficient plasmonic photocatalysts.

Identification of Active Sites in Oxidation Reaction from Real-Time Probing of Adsorbate Motion over Pd Nanoparticles

Obtaining insight into the type of surface sites involved in a reaction is essential to understand catalytic mechanisms at the atomic level and a key for understanding selectivity in surface-catalyzed reactions. Here we use ultrafast broad-band vibrational spectroscopy to follow in real-time diffusion of CO molecules over a palladium nanoparticle surface toward an active site. Site-to-site hopping is triggered by laser excitation of electrons and followed in real-time from subpicosecond changes in the vibrational spectra. CO photoexcitation occurs in 400 fs and hopping from NP facets to edges follows within ∼1 ps. Kinetic modeling allows to quantify the contribution of different facet sites to the catalytic reaction. These results provide useful insights for understanding the mechanism of chemical reactions catalyzed by metal NPs.

Ultrafast Heat Flow in Heterostructures of Au Nanoclusters on Thin Films: Atomic Disorder Induced by Hot Electrons

We study the ultrafast structural dynamics, in response to electronic excitations, in heterostructures composed of size-selected Au nanoclusters on thin-film substrates with the use of femtosecond electron diffraction. Various forms of atomic motion, such as thermal vibrations, thermal expansion, and lattice disordering, manifest as distinct and quantifiable reciprocal-space observables. In photoexcited supported nanoclusters, thermal equilibration proceeds through intrinsic heat flow between their electrons and their lattice and extrinsic heat flow between the nanoclusters and their substrate. For an in-depth understanding of this process, we have extended the two-temperature model to the case of 0D/2D heterostructures and used it to describe energy flow among the various subsystems, to quantify interfacial coupling constants and to elucidate the role of the optical and thermal substrate properties. When lattice heating of Au nanoclusters is dominated by intrinsic heat flow, a reversible disordering of atomic positions occurs, which is absent when heat is injected as hot substrate phonons. The present analysis indicates that hot electrons can distort the lattice of nanoclusters, even if the lattice temperature is below the equilibrium threshold for surface premelting. Based on simple considerations, the effect is interpreted as activation of surface diffusion due to modifications of the potential energy surface at high electronic temperatures. We discuss the implications of such a process in structural changes during surface chemical reactions.

Perspective: How to understand electronic friction

Electronic friction is a correction to the Born-Oppenheimer approximation, whereby nuclei in motion experience a drag in the presence of a manifold of electronic states. The notion of electronic friction has a long history and has been (re-)discovered in the context of a wide variety of different chemical and physical systems including, but not limited to, surface scattering events, surface reactions or chemisorption, electrochemistry, and conduction through molecular-(or nano-) junctions. Over the years, quite a few different forms of electronic friction have been offered in the literature. In this perspective, we briefly review these developments of electronic friction, highlighting the fact that we can now isolate a single, unifying form for (Markovian) electronic friction. We also focus on the role of electron-electron interactions for understanding frictional effects and offer our thoughts on the strengths and weaknesses of using electronic friction to model dynamics in general.

Near infrared light induced plasmonic hot hole transfer at a nano-heterointerface

Localized surface plasmon resonance (LSPR)-induced hot-carrier transfer is a key mechanism for achieving artificial photosynthesis using the whole solar spectrum, even including the infrared (IR) region. In contrast to the explosive development of photocatalysts based on the plasmon-induced hot electron transfer, the hole transfer system is still quite immature regardless of its importance, because the mechanism of plasmon-induced hole transfer has remained unclear. Herein, we elucidate LSPR-induced hot hole transfer in CdS/CuS heterostructured nanocrystals (HNCs) using time-resolved IR (TR-IR) spectroscopy. TR-IR spectroscopy enables the direct observation of carrier in a LSPR-excited CdS/CuS HNC. The spectroscopic results provide insight into the novel hole transfer mechanism, named plasmon-induced transit carrier transfer (PITCT), with high quantum yields (19%) and long-lived charge separations (9.2 μs). As an ultrafast charge recombination is a major drawback of all plasmonic energy conversion systems, we anticipate that PITCT will break the limit of conventional plasmon-induced energy conversion.

Hot hole transfer has applications in plasmonics, photocatalysis, and light harvesting, but is often limited by low quantum yields and short-lived charge separation times. Here, Lian et al. overcome these limitations in heterostructured nanocrystals and proposed a new hot hole transfer mechanism.

Enhancing hot electron collection with nanotube-based three-dimensional catalytic nanodiode under hydrogen oxidation

A novel three-dimensional catalytic nanodiode composed of a Pt thin film on TiO₂ nanotubes was designed for the efficient detection of the flux of hot electrons, or chemicurrent, under hydrogen oxidation.

Quantum theory for the dynamic structure factor in correlated two-component systems in nonequilibrium: Application to x-ray scattering

We present a quantum theory for the dynamic structure factors in nonequilibrium, correlated, two-component systems such as plasmas or warm dense matter. The polarization function, which is needed as the input for the calculation of the structure factors, is calculated in nonequilibrium based on a perturbation expansion in the interaction strength. To make our theory applicable for x-ray scattering, a generalized Chihara decomposition for the total electron structure factor in nonequilibrium is derived. Examples are given and the influence of correlations and exchange on the structure and the x-ray-scattering spectrum are discussed for a model nonequilibrium distribution, as often encountered during laser heating of materials, as well as for two-temperature systems.

Light Emission from Gold Nanoparticles under Ultrafast Near-Infrared Excitation: Thermal Radiation, Inelastic Light Scattering, or Multiphoton Luminescence?

Gold nanoparticles emit broad-band upconverted luminescence upon irradiation with pulsed infrared laser radiation. Although the phenomenon is widely observed, considerable disagreement still exists concerning the underlying physics, most notably over the applicability of concepts such as multiphoton absorption, inelastic scattering, and interband vs intraband electronic transitions. Here, we study single particles and small clusters of particles by employing a spectrally resolved power-law analysis of the irradiation-dependent emission as a sensitive probe of these physical models. Two regimes of emission are identified. At low irradiance levels of kW/cm², the emission follows a well-defined integer-exponent power law suggestive of a multiphoton process. However, at higher irradiance levels of several kW/cm², the nonlinearity exponent itself depends on the photon energy detected, a tell-tale signature of a radiating heated electron gas. We show that in this regime, the experiments are incompatible with both interband transitions and inelastic light scattering as the cause of the luminescence, whereas they are compatible with the notion of luminescence linked to intraband transitions.

Short-wavelength free-electron laser sources and science: a review

This review is focused on free-electron lasers (FELs) in the hard to soft x-ray regime. The aim is to provide newcomers to the area with insights into: the basic physics of FELs, the qualities of the radiation they produce, the challenges of transmitting that radiation to end users and the diversity of current scientific applications. Initial consideration is given to FEL theory in order to provide the foundation for discussion of FEL output properties and the technical challenges of short-wavelength FELs. This is followed by an overview of existing x-ray FEL facilities, future facilities and FEL frontiers. To provide a context for information in the above sections, a detailed comparison of the photon pulse characteristics of FEL sources with those of other sources of high brightness x-rays is made. A brief summary of FEL beamline design and photon diagnostics then precedes an overview of FEL scientific applications. Recent highlights are covered in sections on structural biology, atomic and molecular physics, photochemistry, non-linear spectroscopy, shock physics, solid density plasmas. A short industrial perspective is also included to emphasise potential in this area.

Real-Time Elucidation of Catalytic Pathways in CO Hydrogenation on Ru

The direct elucidation of the reaction pathways in heterogeneous catalysis has been challenging due to the short-lived nature of reaction intermediates. Here, we directly measured on ultrafast time scales the initial hydrogenation steps of adsorbed CO on a Ru catalyst surface, which is known as the bottleneck reaction in syngas and CO₂ reforming processes. We initiated the hydrogenation of CO with an ultrafast laser temperature jump and probed transient changes in the electronic structure using real-time X-ray spectroscopy. In combination with theoretical simulations, we verified the formation of CHO during CO hydrogenation.

Electron to Adsorbate Energy Transfer in Nanoparticles: Adsorption Site, Size, and Support Matter

Confinement of hot electrons in metal nanoparticles (NPs) is expected to lead to increased reactivity in heterogeneous catalysis. NP size as well as support may influence molecule-NP coupling. Here, we use ultrafast nonlinear vibrational spectroscopy to follow energy transfer from hot electrons generated in Pd NP/MgO/Ag(100) to chemisorbed CO. Photoexcitation and photodesorption occur on an ultrashort time scale and are selective according to adsorption site. When the MgO layer is thick enough, it becomes NP size-dependent. Hot electron confinement within NPs is unfavorable for photodesorption, presumably because its dominant effect is to increase relaxation to phonons. An avenue of research is open where NP size and support thickness, photon energy, and molecular electronic structure will be tuned to obtain either molecular stability or reactivity in response to photon excitation.

Hot Hole Photoelectrochemistry on Au@SiO2@Au Nanoparticles

There is currently a worldwide need to develop efficient photocatalytic materials that can reduce the high-energy cost of common industrial chemical processes. One possible solution focuses on metallic nanoparticles (NPs) that can act as efficient absorbers of light due to their surface plasmon resonance. Recent work indicates that small NPs, when photoexcited, may allow for efficient electron or hole transfer necessary for photocatalysis. Here we investigate the mechanisms behind hot hole carrier dynamics by studying the photodriven oxidation of citrate ions on Au@SiO₂@Au core-shell NPs. We find that charge transfer to adsorbed molecules is most efficient at higher photon energies but still present with lower plasmon energy. On the basis of these experimental results, we develop a simple theoretical model for the probability of hot carrier-adsorbate interactions across the NP surface. These results provide a foundation for understanding charge transfer in plasmonic photocatalytic materials, which could allow for further design and optimization of photocatalytic processes.

Absorbed dose evaluation of Auger electron-emitting radionuclides: impact of input decay spectra on dose point kernels and S-values

The aim of this study was to investigate the impact of decay data provided by the newly developed stochastic atomic relaxation model BrIccEmis on dose point kernels (DPKs - radial dose distribution around a unit point source) and S-values (absorbed dose per unit cumulated activity) of 14 Auger electron (AE) emitting radionuclides, namely 67Ga, 80mBr, 89Zr, 90Nb, 99mTc, 111In, 117mSn, 119Sb, 123I, 124I, 125I, 135La, 195mPt and 201Tl. Radiation spectra were based on the nuclear decay data from the medical internal radiation dose (MIRD) RADTABS program and the BrIccEmis code, assuming both an isolated-atom and condensed-phase approach. DPKs were simulated with the PENELOPE Monte Carlo (MC) code using event-by-event electron and photon transport. S-values for concentric spherical cells of various sizes were derived from these DPKs using appropriate geometric reduction factors. The number of Auger and Coster-Kronig (CK) electrons and x-ray photons released per nuclear decay (yield) from MIRD-RADTABS were consistently higher than those calculated using BrIccEmis. DPKs for the electron spectra from BrIccEmis were considerably different from MIRD-RADTABS in the first few hundred nanometres from a point source where most of the Auger electrons are stopped. S-values were, however, not significantly impacted as the differences in DPKs in the sub-micrometre dimension were quickly diminished in larger dimensions. Overestimation in the total AE energy output by MIRD-RADTABS leads to higher predicted energy deposition by AE emitting radionuclides, especially in the immediate vicinity of the decaying radionuclides. This should be taken into account when MIRD-RADTABS data are used to simulate biological damage at nanoscale dimensions.

Direct Pathway to Molecular Photodissociation on Metal Surfaces Using Visible Light

We demonstrate molecular photodissociation on single-crystalline metal substrates, driven by visible-light irradiation. The visible-light-induced photodissociation on metal substrates has long been thought to never occur, either because visible-light energy is much smaller than the optical energy gap between the frontier electronic states of the molecule or because the molecular excited states have short lifetimes due to the strong hybridization between the adsorbate molecular orbitals (MOs) and metal substrate. The S-S bond in dimethyl disulfide adsorbed on both Cu(111) and Ag(111) surfaces was dissociated through direct electronic excitation from the HOMO-derived MO (the nonbonding lone-pair type orbitals on the S atoms (n_S)) to the LUMO-derived MO (the antibonding orbital localized on the S-S bond (σ*_SS)) by irradiation with visible light. A combination of scanning tunneling microscopy and density functional theory calculations revealed that visible-light-induced photodissociation becomes possible due to the interfacial electronic structures constructed by the hybridization between molecular orbitals and the metal substrate states. The molecule-metal hybridization decreases the gap between the HOMO- and LUMO-derived MOs into the visible-light energy region and forms LUMO-derived MOs that have less overlap with the metal substrate, which results in longer excited-state lifetimes.

Adlayer structure dependent ultrafast desorption dynamics in carbon monoxide adsorbed on Pd (111)

We report our ultrafast photoinduced desorption investigation of the coverage dependence of substrate-adsorbate energy transfer in carbon monoxide adlayers on the (111) surface of palladium. As the CO coverage is increased, the adsorption site population shifts from all threefold hollows (up to 0.33 ML), to bridge and near bridge (>0.5 to 0.6 ML) and finally to mixed threefold hollow plus top site (at saturation at 0.75 ML). We show that between 0.24 and 0.75 ML this progression of binding site motifs is accompanied by two remarkable features in the ultrafast photoinduced desorption of the adsorbates: (i) the desorption probability increases roughly two orders magnitude, and (ii) the adsorbate-substrate energy transfer rate observed in two-pulse correlation experiments varies nonmonotonically, having a minimum at intermediate coverages. Simulations using a phenomenological model to describe the adsorbate-substrate energy transfer in terms of frictional coupling indicate that these features are consistent with an adsorption-site dependent electron-mediated energy coupling strength, ηel, that decreases with binding site in the order: three-fold hollow > bridge and near bridge > top site. This weakening of ηel largely counterbalances the decrease in the desorption activation energy that accompanies this progression of adsorption site motifs, moderating what would otherwise be a rise of several orders of magnitude in the desorption probability. Within this framework, the observed energy transfer rate enhancement at saturation coverage is due to interadsorbate energy transfer from the copopulation of molecules bound in three-fold hollows to their top-site neighbors.

Disentangling Multidimensional Nonequilibrium Dynamics of Adsorbates: CO Desorption from Cu(100)

Hot carriers at metal surfaces can drive nonthermal reactions of adsorbates. Characterizing nonequilibrium statistics among various degrees of freedom in an ultrafast time scale is crucial to understand and develop hot carrier-driven chemistry. Here we demonstrate multidimensional vibrational dynamics of carbon monoxide (CO) on Cu(100) along hot-carrier induced desorption studied by using time-resolved vibrational sum-frequency generation with phase-sensitive detection. Instantaneous frequency and amplitude of the CO internal stretching mode are tracked with a subpicosecond time resolution that is shorter than the vibrational dephasing time. These experimental results in combination with numerical analysis based on Langevin simulations enable us to extract nonequilibrium distributions of external vibrational modes of desorbing molecules. Superstatistical distributions are generated with mode-dependent frictional couplings in a few hundred femtoseconds after hot-electron excitation, and energy flow from hot electrons and intermode anharmonic coupling play crucial roles in the subsequent evolution of the non-Boltzman distributions.

Quantum effects in the plasmon response of bimetallic core-shell nanostructures

We report a quantum mechanical study of the plasmonic response of bimetallic spherical core/shell nanoparticles. The systems comprise up to 10⁴ electrons and their optical response is addressed with Time Dependent Density Functional Theory calculations. These quantum results are compared with classical electromagnetic calculations for core/shell systems formed by Al/Na, Al/Au and Ag/Na, as representative examples of bimetallic systems. We show that for shell widths in the nanometer range, the system cannot be described as a simple stack of two metals. The finite size effect and the transition layer formed between the core and the shell strongly modify the optical properties of the compound nanoparticle. In particular this configuration leads to a frequency shift of the plasmon resonance with shell character and an increased plasmon decay into electron-hole pairs which eventually quenches this resonance for very thin shells. This effect is difficult to capture with a classical theory even upon adjustment of the parameters of a combination of metallic dielectric functions.

Chemical Bond Activation Observed with an X-ray Laser

The concept of bonding and antibonding orbitals is fundamental in chemistry. The population of those orbitals and the energetic difference between the two reflect the strength of the bonding interaction. Weakening the bond is expected to reduce this energetic splitting, but the transient character of bond-activation has so far prohibited direct experimental access. Here we apply time-resolved soft X-ray spectroscopy at a free-electron laser to directly observe the decreased bonding-antibonding splitting following bond-activation using an ultrashort optical laser pulse.

Graphene-Semiconductor Catalytic Nanodiodes for Quantitative Detection of Hot Electrons Induced by a Chemical Reaction

Direct detection of hot electrons generated by exothermic surface reactions on nanocatalysts is an effective strategy to obtain insight into electronic excitation during chemical reactions. For this purpose, we fabricated a novel catalytic nanodiode based on a Schottky junction between a single layer of graphene and an n-type TiO2 layer that enables the detection of hot electron flows produced by hydrogen oxidation on Pt nanoparticles. By making a comparative analysis of data obtained from measuring the hot electron current (chemicurrent) and turnover frequency, we demonstrate that graphene's unique electronic structure and extraordinary material properties, including its atomically thin nature and ballistic electron transport, allow improved conductivity at the interface between the catalytic Pt nanoparticles and the support. Thereby, graphene-based nanodiodes offer an effective and facile way to approach the study of chemical energy conversion mechanisms in composite catalysts with carbon-based supports.

Two distinctive energy migration pathways of monolayer molecules on metal nanoparticle surfaces

Energy migrations at metal nanomaterial surfaces are fundamentally important to heterogeneous reactions. Here we report two distinctive energy migration pathways of monolayer adsorbate molecules on differently sized metal nanoparticle surfaces investigated with ultrafast vibrational spectroscopy. On a 5 nm platinum particle, within a few picoseconds the vibrational energy of a carbon monoxide adsorbate rapidly dissipates into the particle through electron/hole pair excitations, generating heat that quickly migrates on surface. In contrast, the lack of vibration-electron coupling on approximately 1 nm particles results in vibrational energy migration among adsorbates that occurs on a twenty times slower timescale. Further investigations reveal that the rapid carbon monoxide energy relaxation is also affected by the adsorption sites and the nature of the metal but to a lesser extent. These findings reflect the dependence of electron/vibration coupling on the metallic nature, size and surface site of nanoparticles and its significance in mediating energy relaxations and migrations on nanoparticle surfaces.

Energy migrations at metal nanomaterial surfaces are fundamentally important to heterogeneous reactions. Here, the authors employ ultrafast vibrational spectroscopy to show two distinctive energy migration pathways of monolayer adsorbate molecules on differently sized metal nanoparticle surfaces.

A RAIRS, TPD and femtosecond laser-induced desorption study of CO, NO and coadsorbed CO + NO on Pd(111)

Here we describe novel RAIRS, TPD and LID studies of CO, NO and coadsorbed CO and NO on Pd.

Role of the Substrate Orientation in the Photoinduced Electron Dynamics at the Porphyrin/Ag Interface

Photochemically activated reactions, despite being a powerful tool to covalently stabilize self-organized molecular structures on metallic surfaces, have struggled to take off due to several not yet well understood light-driven processes that can affect the final result. A thorough understanding of the photoinduced charge transfer mechanisms at the organic/metal interface would pave the way to controlling these processes and to developing on-surface photochemistry. Here, by time-resolved two-photon photoemission measurements, we track the relaxation processes of the first two excited molecular states at the interface between porphyrin, the essential chromophore in chlorophyll, and two different orientations of the silver surface. Due to the energy alignment of the porphyrin first excited state with the unoccupied sp-bands, an indirect charge transfer path, from the substrate to the molecule, opens in porphyrin/Ag(100) 250 fs after the laser pump excitation. The same time-resolved measurements carried out on porphyrin/Ag(111) show that in the latter case such an indirect path is not viable.

Ultrafast surface-enhanced Raman spectroscopy

Ultrafast surface-enhanced Raman spectroscopy (SERS) with pico- and femtosecond time resolution has the ability to elucidate the mechanisms by which plasmons mediate chemical reactions. Here we review three important technological advances in these new methodologies, and discuss their prospects for applications in areas including plasmon-induced chemistry and sensing at very low limits of detection. Surface enhancement, arising from plasmonic materials, has been successfully incorporated with stimulated Raman techniques such as femtosecond stimulated Raman spectroscopy (FSRS) and coherent anti-Stokes Raman spectroscopy (CARS). These techniques are capable of time-resolved measurement on the femtosecond and picosecond time scale and can be used to follow the dynamics of molecules reacting near plasmonic surfaces. We discuss the potential application of ultrafast SERS techniques to probe plasmon-mediated processes, such as H2 dissociation and solar steam production. Additionally, we discuss the possibilities for high sensitivity SERS sensing using these stimulated Raman spectroscopies.