Transformation of carbon dioxide

Thermocatalytic Conversion of CO2 to Valuable Products Activated by Noble-Metal-Free Metal-Organic Frameworks

Thermocatalysis of CO2 into high valuable products is an efficient and green method for mitigating global warming and other environmental problems, of which Noble-metal-free metal-organic frameworks (MOFs) are one of the most promising heterogeneous catalysts for CO2 thermocatalysis, and many excellent researches have been published. Hence, this review focuses on the valuable products obtained from various CO2 conversion reactions catalyzed by noble-metal-free MOFs, such as cyclic carbonates, oxazolidinones, carboxylic acids, N-phenylformamide, methanol, ethanol, and methane. We classified these published references according to the types of products, and analyzed the methods for improving the catalytic efficiency of MOFs in CO2 reaction. The advantages of using noble-metal-free MOF catalysts for CO2 conversion were also discussed along the text. This review concludes with future perspectives on the challenges to be addressed and potential research directions. We believe that this review will be helpful to readers and attract more scientists to join the topic of CO2 conversion.

Renaissance of elemental phosphorus materials: properties, synthesis, and applications in sustainable energy and environment

The polymorphism of phosphorus-based materials has garnered much research interest, and the variable chemical bonding structures give rise to a variety of micro and nanostructures. Among the different types of materials containing phosphorus, elemental phosphorus materials (EPMs) constitute the foundation for the synthesis of related compounds. EPMs are experiencing a renaissance in the post-graphene era, thanks to recent advancements in the scaling-down of black phosphorus, amorphous red phosphorus, violet phosphorus, and fibrous phosphorus and consequently, diverse classes of low-dimensional sheets, ribbons, and dots of EPMs with intriguing properties have been produced. The nanostructured EPMs featuring tunable bandgaps, moderate carrier mobility, and excellent optical absorption have shown great potential in energy conversion, energy storage, and environmental remediation. It is thus important to have a good understanding of the differences and interrelationships among diverse EPMs, their intrinsic physical and chemical properties, the synthesis of specific structures, and the selection of suitable nanostructures of EPMs for particular applications. In this comprehensive review, we aim to provide an in-depth analysis and discussion of the fundamental physicochemical properties, synthesis, and applications of EPMs in the areas of energy conversion, energy storage, and environmental remediation. Our evaluations are based on recent literature on well-established phosphorus allotropes and theoretical predictions of new EPMs. The objective of this review is to enhance our comprehension of the characteristics of EPMs, keep abreast of recent advances, and provide guidance for future research of EPMs in the fields of chemistry and materials science.

Recent Progress in Multifunctional Graphene-Based Nanocomposites for Photocatalysis and Electrocatalysis Application

The global energy shortage and environmental degradation are two major issues of concern in today's society. The production of renewable energy and the treatment of pollutants are currently the mainstream research directions in the field of photocatalysis. In addition, over the last decade or so, graphene (GR) has been widely used in photocatalysis due to its unique physical and chemical properties, such as its large light-absorption range, high adsorption capacity, large specific surface area, and excellent electronic conductivity. Here, we first introduce the unique properties of graphene, such as its high specific surface area, chemical stability, etc. Then, the basic principles of photocatalytic hydrolysis, pollutant degradation, and the photocatalytic reduction of CO₂ are summarized. We then give an overview of the optimization strategies for graphene-based photocatalysis and the latest advances in its application. Finally, we present challenges and perspectives for graphene-based applications in this field in light of recent developments.

Photocatalytic Reduction of Carbon Dioxide to Methanol: Carbonaceous Materials, Kinetics, Industrial Feasibility, and Future Directions

Photocatalytic carbon dioxide reduction (PCCR) for methanol synthesis (CH₃OH) targeting renewable energy resources is an attractive way to create a sustainable environment and also balance the carbon-neutral series. The application of PCCR to methanol enables the generation of solar energy while reducing CO₂, killing two birds with one stone in terms of energy and the environment. In recent years, research on CO₂ utilization has focused on hydrogenation of CO₂ to methanol due to global warming. This article mainly focuses on selective carbonaceous materials such as graphene, mesoporous carbon, and carbon nanotubes (CNTs) as catalysts for heterogeneous photocatalytic CO₂ reduction to methanol. In addition, special emphasis will be placed on the state of the art of PCCR catalysts as this type of research will be of great benefit for further development in this field. The main features of the reaction kinetics, techno-economic study, and current technological developments in PCCR are covered in detail.

Novel salenCo(iii) photoinitiators and their application for cycloaddition of carbon dioxide

Carbon dioxide (CO₂) is a renewable carbon resource that can be effectively used in the production of polycarbonate (PPC) and cyclic carbonate (CPC) through open-loop copolymerization with epoxides and CO₂. SalenCo(iii) can successfully break the carbon-oxygen link between propylene oxide (PO) and CO₂. On this basis, we prepared four different types of photosensitive salenCo(iii) complexes and investigated their catalytic copolymerization of CO₂ and PO. The results show that the catalytic performance of 1,2-cyclohexamediamine complexes is better than that of 1,2-o-phenylenediamine complexes. The catalytic efficiency of salenCo(iii) catalyst increases with the expansion of the photosensitive conjugate system. In addition, the introduction of light can improve the catalytic efficiency. When we increased the power of the external light source from 100 W to 200 W, the TON of the catalyst [C4] increased by nearly 50%.

Bicyclic (alkyl)(amino)carbene (BICAAC) in a dual role: activation of primary amides and CO2 towards catalytic N-methylation

Herein, we report the first catalytic methylation of primary amides using CO₂ as a C1 source. A bicyclic (alkyl)(amino)carbene (BICAAC) exhibits dual role by activating both primary amide and CO₂ to carry out this catalytic transformation which enables the formation of a new C-N bond in the presence of pinacolborane. This protocol was applicable to a wide range of substrate scopes, including aromatic, heteroaromatic, and aliphatic amides. We successfully used this procedure in the diversification of drug and bioactive molecules. Moreover, this method was explored for isotope labelling using ¹³CO₂ for a few biologically important molecules. A detailed study of the mechanism was carried out with the help of spectroscopic studies and DFT calculations.

Biodegradable polycarbonates from lignocellulose based 4-pentenoic acid and carbon dioxide

The production of biodegradable polycarbonate by copolymerizing CO₂ with epoxides has emerged as an effective method to utilize CO₂ in response to growing concerns about CO₂ emissions and plastic pollution. Previous studies have mainly focused on the preparation of CO₂-based polycarbonates from petrochemical-derived propylene oxide (PO) or cyclohexene oxide (CHO). However, to reduce dependence on fossil fuels, the development of 100% bio-based polymers has gained attention in polymer synthesis. Herein, we reported the synthesis of glycidyl 4-pentenoate (GPA) from lignocellulose based 4-pentenoic acid (4-PA), which was further copolymerized with CO₂ using a binary catalyst SalenCoCl/PPNCl to produce bio-based polycarbonates with vinyl side chains and molecular weights up to 17.1 kg/mol. Introducing a third monomer, PO, allows for the synthesis of the GPA/PO/CO₂ terpolymer, and the glass transition temperature (T _g) of the terpolymer can be adjusted from 2°C to 19°C by controlling the molar feeding ratio of GPA to PO from 7:3 to 3:7. Additionally, post-modification of the vinyl side chains enables the production of functional polycarbonates, providing a novel approach to the preparation of bio-based materials with diverse side chains and functions.

Mechanistic Study and Conceptual Chemical Reactivity Analysis of Hydroboration of Carbon Dioxide Catalyzed by a Manganese(I)-PNP-Pincer Complex

Designing efficient and selective catalysts for carbon dioxide reduction is an intensive research area in the recent literature on homogeneous catalysis. In this work, we study the catalytic activity of a newly reported Mn(I)-PNP-pincer catalyst with an embedded aromatic ring. First, we systematically examine its capability to yield different products and highlight the importance of ligand aromaticity and steric effects on metal-ligand cooperativity. We then further conceptually probe its reactivity with descriptors from both conceptual density functional theory and an information-theoretic approach, thereby proposing a novel partitioning of the reaction coordinate into three relevant regions. Our results show that the reactivity in these different regions is governed by different properties such as steric effects, electrophilicity/nucleophilicity, or aromaticity. We anticipate that this methodology, with the analytical tools employed in this study, can be generalized and extended to other catalytic systems and find applications in designing better catalysts.

Catalytic asymmetric CO2 utilization reaction for the enantioselective synthesis of chiral 2-oxazolidinones

Catalytic asymmetric bromocyclizations of in situ generated carbamic acids from CO₂ and allylamines were achieved via the use of a BINOL-derived chiral bifunctional selenide catalyst bearing a hydroxy group. Chiral 2-oxazolidinone products as important pharmaceutical building blocks were obtained with good enantioselectivities by the present catalytic asymmetric CO₂ utilization reactions.

Infrared photodissociation spectroscopy of mass-selected [TaO3(CO2)n]+ (n = 2-5) complexes in the gas phase

We report a joint experimental and theoretical study on the structures of gas-phase [TaO₃(CO₂)_n]⁺ (n = 2-5) ion-molecule complexes. Infrared photodissociation spectra of mass-selected [TaO₃(CO₂)_n]⁺ complexes were recorded in the frequency region from 2200 to 2450 cm^-1 and assigned through comparing with the simulated infrared spectra of energetically low-lying structures derived from quantum chemical calculations. With the increasing number of attached CO₂ molecules, the larger clusters show significantly enhanced fragmentation efficiency and a strong band appears at around 2350 cm^-1 near the free CO₂ antisymmetric stretching vibration band, indicating only a small perturbation of CO₂ molecules on the secondary solvation sphere while higher frequency bands corresponding to the core structure remain largely unaffected. A core structure [TaO₃(CO₂)₃]⁺ is identified to which subsequent CO₂ ligands are weakly attached and the most favorable cluster growth path is verified to proceed on the triplet potential energy surface higher in energy than that of ground states. Theoretical exploration reveals a two-state reactivity (TSR) scenario in which the energetically favored triplet transition state crosses over the singlet ground state to form a TaO₃⁺ core ion, providing new information on the cluster formation correlated with the reactivity of tantalum metal oxides towards CO₂.

CO2-responsive gels

CO₂-responsive materials undergo a change in chemical or physical properties in response to the introduction or removal of CO₂. The use of CO₂ as a stimulus is advantageous as it is abundant, benign, inexpensive, and it does not accumulate in a system. Many CO₂-responsive materials have already been explored including polymers, latexes, surfactants, and catalysts. As a sub-set of CO₂-responsive polymers, the study of CO₂-responsive gels (insoluble, cross-linked polymers) is a unique discipline due to the unique set of changes in the gels brought about by CO₂ such as swelling or a transformed morphology. In the past 15 years, CO₂-responsive gels and self-assembled gels have been investigated for a variety of emerging potential applications, reported in 90 peer-reviewed publications. The two most widely exploited properties include the control of flow (fluids) via CO₂-triggered aggregation and their capacity for reversible CO₂ absorption-desorption, leading to applications in Enhanced Oil Recovery (EOR) and CO₂ sequestration, respectively. In this paper, we review the preparation, properties, and applications of these CO₂-responsive gels, broadly classified by particle size as nanogels, microgels, aerogels, and macrogels. We have included a section on CO₂-induced self-assembled gels (including poly(ionic liquid) gels).

Base- and Additive-Free Carbon Dioxide Hydroboration to Methoxyboranes Catalyzed by Non-Pincer-Type Mn(I) Complexes

Well-defined, bench stable Mn(I) non-pincer-type complexes were tested as earth-abundant transition metal catalysts for the selective reduction of CO₂ to boryl-protected MeOH in the presence of pinacolborane (HBpin). Essentially, quantitative yields were obtained under mild reaction conditions (1 bar CO₂, 60 °C), without the need of any base or additives, in the presence of the alkylcarbonyl Mn(I) bis(phosphine) complexes fac-[Mn(CH₂CH₂CH₃)(dippe)(CO)₃] [Mn1, dippe = 1,2-bis(diisopropylphosphino)ethane] and [Mn(dippe)(CO)₂{(μ-H)₂(Bpin)}] (Mn4), that is obtained by reaction of the bench-stable precatalyst Mn1 with HBpin via elimination of butanal. Preliminary mechanistic details were obtained by a combination of NMR experiments and monitoring of the catalytic reactions.

Surface species in direct liquid phase synthesis of dimethyl carbonate from methanol and CO2: an MCR-ALS augmented ATR-IR study

The reaction mechanism of dimethyl carbonate (DMC) production over ZrO₂ from CO₂ and CH₃OH is well-known, but the level of understanding has not improved in the last decade. Most commonly, the reaction mechanism has been explored in the gas phase, whilst DMC production occurs in the liquid phase. To overcome this contradiction, we exploited in situ ATR-IR spectroscopy to study DMC formation over ZrO₂ in the liquid phase. A multiple curve resolution-alternate least square (MCR-ALS) approach was applied to spectra collected during the CO₂/CH₃OH interaction with the catalyst surface, leading to the identification of five pure components with their respective concentration profiles. CO₂ and CH₃OH activation to carbonates and methoxide species was found to strongly depend on the reaction temperature. Low temperature prevents methanol dissociation leaving a catalyst covered with stable carbonates, whilst higher temperature decreases the stability of the carbonates and enhances the formation of methoxides. A reaction path involving the methoxide/carbonate interaction at the surface was observed at low temperature (≤50 °C). We propose that a different reaction path, independent of carbonate formation and involving the direct CO₂/methoxide interplay, occurs at 70 °C.

Photoinduced Catalytic Organic-Hydride Transfer to CO2 Mediated with Ruthenium Complexes as NAD+ /NADH Redox Couple Models

The catalytic organic-hydride transfer to CO₂ was first achieved through the photoinduced two-electron reduction of the [Ru(bpy)₂ (pbn)]²⁺ /[Ru(bpy)₂ (pbnHH)]²⁺ (bpy=2,2'-bipyridine, pbn=2-(pyridin-2-yl)benzo[b]-1,5-naphthyridine, and pbnHH=2-(pyridin-2-yl)-5,10-dihydrobenzo[b]-1,5-naphthyridine) redox couple in the presence of 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH). The active species for the catalytic hydride transfer to carbon dioxide giving formate is [Ru(bpy)(bpy⋅^- )(pbnHH)]⁺ formed by one-electron reduction of [Ru(bpy)₂ (pbnHH)]²⁺ with BI⋅.

Dual Nickel Photocatalysis for O-Aryl Carbamate Synthesis from Carbon Dioxide

We report the use of dual nickel photocatalysis in the synthesis of O-aryl carbamates from aryl iodides or bromides, amines, and carbon dioxide. The reaction proceeded in visible light, at ambient carbon dioxide pressure, and without stoichiometric activating reagents. Mechanistic analysis is consistent with a Ni(I-III) cycle, where the active species is generated by the photocatalyst. The rate-limiting steps were the photocatalyst-mediated reduction of Ni(II) to Ni(I) and subsequent oxidative addition of the aryl halide. The physical properties of the photocatalyst were critical for promoting formation of O-aryl carbamates over various byproducts. Nine new phthalonitrile photocatalysts were synthesized, which exhibited properties that were vital to achieve high selectivity and activity.

Polymers without Petrochemicals: Sustainable Routes to Conventional Monomers

Access to a wide range of plastic materials has been rationalized by the increased demand from growing populations and the development of high-throughput production systems. Plastic materials at low costs with reliable properties have been utilized in many everyday products. Multibillion-dollar companies are established around these plastic materials, and each polymer takes years to optimize, secure intellectual property, comply with the regulatory bodies such as the Registration, Evaluation, Authorisation and Restriction of Chemicals and the Environmental Protection Agency and develop consumer confidence. Therefore, developing a fully sustainable new plastic material with even a slightly different chemical structure is a costly and long process. Hence, the production of the common plastic materials with exactly the same chemical structures that does not require any new registration processes better reflects the reality of how to address the critical future of sustainable plastics. In this review, we have highlighted the very recent examples on the synthesis of common monomers using chemicals from sustainable feedstocks that can be used as a like-for-like substitute to prepare conventional petrochemical-free thermoplastics.

Mechanism of Hydroboration of CO2 Using an Fe Catalyst: What Controls the Reactivity and Product Selectivity?

Using a combination of density functional theory (DFT) and ab initio complete active space self-consistent field (CASSCF) calculations, various elementary steps in the mechanism of the reductive hydroboration of CO₂ to two-electron-reduced boryl formate, four-electron-reduced bis(boryl)acetal, and six-electron-reduced methoxy borane by the [Fe(H)₂(dmpe)₂] catalyst were established. The replacement of hydride by oxygen ligation after the boryl formate insertion step is the rate-determining step. Our work unveils, for the first time, (i) how a substrate steers product selectivity in this reaction and (ii) the importance of configurational mixing in contracting the kinetic barrier heights. Based on the reaction mechanism established, we have further focused on the effect of other metals, such as Mn and Co, on rate-determining steps and on catalyst regeneration.

Sulphur vs NH Group: Effects on the CO2 Electroreduction Capability of Phenylenediamine-Cp Cobalt Complexes

The cobalt complex (I) with cyclopentadienyl and 2-aminothiophenolate ligands was investigated as a homogeneous catalyst for electrochemical CO₂ reduction. By comparing its behavior with an analogous complex with the phenylenediamine (II), the effect of sulfur atom as a substituent has been evaluated. As a result, a positive shift of the reduction potential and the reversibility of the corresponding redox process have been observed, also suggesting a higher stability of the compound with sulfur. Under anhydrous conditions, complex I showed a higher current enhancement in the presence of CO₂ (9.41) in comparison with II (4.12). Moreover, the presence of only one -NH group in I explained the difference in the observed increases on the catalytic activity toward CO₂ due to the presence of water, with current enhancements of 22.73 and 24.40 for I and II, respectively. DFT calculations confirmed the effect of sulfur on the lowering of the energy of the frontier orbitals of I, highlighted by electrochemical measurements. Furthermore, the condensed Fukui function f ^- values agreed very well with the current enhancement observed in the absence of water.

Aluminum Porphyrin-Based Ionic Porous Aromatic Frameworks Having High Surface Areas and Highly Dispersed Dual-Function Sites for Boosting the Catalytic Conversion of CO2 into Cyclic Carbonates

Multifunctionalization of porous organic polymers toward synergistic CO₂ catalysis has drawn much attention in recent decades, but it still faces many challenges. Herein, we develop a facile, simple, and efficient strategy to obtain a series of aluminum porphyrin-based ionic porous aromatic frameworks (iPAFs), which are considered excellent bifunctional catalysts for converting CO₂ into cyclic carbonates without any cocatalyst under mild and solvent-free conditions. By increasing the amounts of tetraphenylmethane fragments in the porphyrin backbones, the cooperative effect between Lewis acidic metal centers and nucleophilic ionic sites has been enhanced and then the significant improvement of catalytic activity can be achieved owing to the high surface areas (up to 719 m²·g^-1), abundant hierarchical micro-mesopores, and prominent CO₂ adsorption capacities (up to 1.8 mmol·g^-1 at 273 K) as well as highly dispersed dual-function sites. More fascinatingly, high-active AlPor-iPAF-3 enables CO₂ cycloaddition to perform with diluted CO₂ (15% CO₂ in 85% N₂, v/v) or under ambient conditions. Therefore, this postsynthetic modification procedure in combination with the framework dilution strategy provides a new approach to fabricating high-surface-area metalloporphyrin-based porous ionic polymers (PIPs) with hierarchical structures, which is conducive to improving the accessibility of multiple active sites around substrates.

Nanocomposite of CO2-Based Polycarbonate Polyol with Highly Exfoliated Nanoclay

Polypropylene carbonate (PPC) derived from carbon dioxide has been used as a precursor for the synthesis of polyurethane (PU). The high viscosity of the PPC is the key parameter hindering its processability during PU synthesis. Herein, a PPC nanocomposite with highly exfoliated nanoclay was prepared through a solution intercalation process. A wide range of nanoclay concentrations incorporated into the PPC were studied. The impacts of the nanoclay on the PPC were investigated in order to maintain the polymer structure while improving its physical properties. The characterizations of PPC nanocomposites showed that the highly exfoliated nanoclay contributed to a viscosity reduction, and a slight reduction in the molecular weight. The polymer degradation was indicated by the formation of cyclic propylene carbonate. The minimum or critical concentration of nanoclay was found to be between ∼0.5 and 2.0 wt %. Within this range, the polymer degradation is minimal. The PPC nanocomposites with a lower viscosity showed excellent precursors for making PU coating materials. The PU coating derived from the PPC nanocomposite has higher anticorrosive properties in comparison with the non-modified PU coating.

Divergent dehydroxyfluorination and carbonation of alcohols with trifluoromethyl trifluoromethanesulfonate

Preparation of alkyl fluorides and carbonates via divergent dehydroxyfluorination and carbonation of alcohols with trifluoromethyl trifluoromethanesulfonate (CF₃SO₂OCF₃) is described. The reactions performed with BTMG in THF provided alkyl fluorides in good yields, whereas those of two different alcohols with Et₃N in DCM formed asymmetric carbonates in moderate to excellent yields. CF₃SO₂OCF₃ was demonstrated to be either a "F" or a "CO" reagent in the reactions by changing the base, allowing the selective construction of alkyl fluorides and carbonates from the corresponding alcohols with high efficiency. Notably, the fluorine-containing asymmetric carbonates that are difficult to synthesize by other methods were comprehensively prepared by this method, which would have great application potential in both academic and industrial fields.

Bimetallic Metal-Organic Framework Derived Nanocatalyst for CO2 Fixation through Benzimidazole Formation and Methanation of CO2

In this paper, a bimetallic Metal-Organic Framework (MOF) CoNiBTC was employed as a precursor for the fabrication of bimetallic nanoalloys CoNi@C evenly disseminated in carbon shells. These functional nanomaterials are characterized by powdered X-ray diffraction (PXRD), Fourier Transform Infra-Red spectroscopy (FTIR), surface area porosity analyzer, X-ray photoelectron spectroscopy (XPS), Field emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM), Hydrogen Temperature-Programmed Reduction (H2 TPR), CO2 Temperature-Programmed Desorption (CO2-TPD), and Inductively Coupled Plasma Mass Spectrometry (ICP-MS). This nanocatalyst was utilized in the synthesis of benzimidazole from o-phenylenediamine in the presence of CO2 and H2 in a good yield of 81%. The catalyst was also efficient in the manufacture of several substituted benzimidazoles with high yield. Due to the existence of a bimetallic nanoalloy of Co and Ni, this catalyst was also employed in the methanation of CO2 with high selectivity (99.7%).

Metal-Ligand Cooperativity in MnI -Catalysed N-Formylation of Secondary Amides and Lactams Using CO2 at Room Temperature

A Mn^I catalyst featuring redox-active tridentate phenalenyl (PLY) ligand has been used for catalytic N-formylation of secondary amides and lactams under 1 atm CO₂ as a C₁ source at room temperature for the first time. The protocol is applicable to a wide range of secondary amides including heterocycles, bio-active cinnamide derivatives and the diversification of therapeutic molecules. In-depth mechanistic investigations based on experimental outcomes and DFT calculations suggested an unconventional metal-ligand cooperation, where a ligand-centred radical plays a crucial role in initiating the reaction process.

Molten salt electro-preparation of graphitic carbons

Graphite has been used in a wide range of applications since the discovery due to its great chemical stability, excellent electrical conductivity, availability, and ease of processing. However, the synthesis of graphite materials still remains energy-intensive as they are usually produced through a high-temperature treatment (>3000°C). Herein, we introduce a molten salt electrochemical approach utilizing carbon dioxide (CO₂) or amorphous carbons as raw precursors for graphite synthesis. With the assistance of molten salts, the processes can be conducted at moderate temperatures (700-850°C). The mechanisms of the electrochemical conversion of CO₂ and amorphous carbons into graphitic materials are presented. Furthermore, the factors that affect the graphitization degree of the prepared graphitic products, such as molten salt composition, working temperature, cell voltage, additives, and electrodes, are discussed. The energy storage applications of these graphitic carbons in batteries and supercapacitors are also summarized. Moreover, the energy consumption and cost estimation of the processes are reviewed, which provides perspectives on the large-scale synthesis of graphitic carbons using this molten salt electrochemical strategy.

PNP-type ligands enabled copper-catalyzed N-formylation of amines with CO2 in the presence of silanes

The sustainable catalytic transformation of carbon dioxide into valuable fine chemicals with high efficiency is a global challenge as although CO₂ is an abundant, nontoxic, and sustainable carbon feedstock it is also the most important factor behind the Greenhouse Effect. We describe herein a PNP-type ligand-enabled copper-catalyzed N-formylation of amines utilizing CO₂ as the building block in the presence of hydrosilane as the reductant. Our current protocol featured newly synthesized PNP-type ligands with broad substrate scope under mild reaction conditions.

Reactivity of a Cationic Bismuth Amide towards Unsymmetric Heterocumulenes

The reactivity of a literature-known, ring-strained bismuth amide cation towards a range of unsymmetric heterocumulene substrates has been investigated. Reactions with ketenes R₂ C=C=O (R=Me, Ph), isocyanates R'N=C=O, and isothiocyanates R'N=C=S (R'=Ph, 4-CF₃ -C₆ H₄ ) proceed via facile insertion of the heterocumulene in the Bi-N bond of the cationic bismuth amide. Unexpectedly pronounced differences in the regioselectivity of these insertion reactions have been observed, yielding a rich variety of heterocycle motifs (BiC₂ NC₂ , BiC₂ NCO, BiC₂ NCS, BiC₂ NCN), some of which are unprecedented. Parameters that control the regioselectivity of the insertion reactions have been identified and are discussed based on experimental and theoretical investigations. Analytical techniques applied in this work include heteronuclear and two-dimensional NMR spectroscopy, IR spectroscopy, elemental analysis, single-crystal X-ray diffraction analyses, and DFT calculations.

Photocatalytic Late-Stage C-H Functionalization

The emergence of modern photocatalysis, characterized by mildness and selectivity, has significantly spurred innovative late-stage C-H functionalization approaches that make use of low energy photons as a controllable energy source. Compared to traditional late-stage functionalization strategies, photocatalysis paves the way toward complementary and/or previously unattainable regio- and chemoselectivities. Merging the compelling benefits of photocatalysis with the late-stage functionalization workflow offers a potentially unmatched arsenal to tackle drug development campaigns and beyond. This Review highlights the photocatalytic late-stage C-H functionalization strategies of small-molecule drugs, agrochemicals, and natural products, classified according to the targeted C-H bond and the newly formed one. Emphasis is devoted to identifying, describing, and comparing the main mechanistic scenarios. The Review draws a critical comparison between established ionic chemistry and photocatalyzed radical-based manifolds. The Review aims to establish the current state-of-the-art and illustrate the key unsolved challenges to be addressed in the future. The authors aim to introduce the general readership to the main approaches toward photocatalytic late-stage C-H functionalization, and specialist practitioners to the critical evaluation of the current methodologies, potential for improvement, and future uncharted directions.

A novel zirconium-based metal-organic framework covalently modified by methyl pyridinium bromide for mild and co-catalyst free conversion of CO2 to cyclic carbonates

Building metal-organic frameworks (MOFs) covalently modified by onium halides is a promising approach to develop efficient MOF-based heterogeneous catalysts for the cycloaddition of CO₂ to epoxides (CCE) into cyclic carbonates. Herein, we report a novel zirconium-based MOF covalently modified by methyl pyridinium bromide, Zr₆O₄(OH)₄(MPTDC)_2.2(N-CH₃-MPTDC)_3.8Br_3.8 ((Br-)CH3-Pyridinium-MOF-1), where MPTDC denotes 3-methyl-4-pyridin-4-yl-thieno[2,3-b] thiophene-2,5-dicarboxylate. The structure and composition of this complex were fully characterized with PXRD, NMR, XPS, TEM and so on. CO₂ adsorption experiments show that (Br-)CH3-Pyridinium-MOF-1 has a higher affinity for CO₂ than its electrically neutral precursor, which should be attributed to the fact that charging frameworks containing pyridinium salt have stronger polarization to CO₂. (Br-)CH3-Pyridinium-MOF-1 integrated reactive Lewis acid sites and Br^- nucleophilic anions and exhibited efficient catalytic activity for CCE under ambient pressure in the absence of co-catalysts and solvents. Furthermore, (Br-)CH3-Pyridinium-MOF-1 was recycled after five successive cycles without substantial loss in catalytic activity. The corresponding reaction mechanism also was speculated.

CO2 in indoor environments: From environmental and health risk to potential renewable carbon source

In the developed world, individuals spend most of their time indoors. Poor Indoor Air Quality (IAQ) has a wide range of effects on human health. The burden of disease associated with indoor air accounts for millions of premature deaths related to exposure to Indoor Air Pollutants (IAPs). Among them, CO₂ is the most common one, and is commonly used as a metric of IAQ. Indoor CO₂ concentrations can be significantly higher than outdoors due to human metabolism and activities. Even in presence of ventilation, controlling the CO₂ concentration below the Indoor Air Guideline Values (IAGVs) is a challenge, and many indoor environments including schools, offices and transportation exceed the recommended value of 1000 ppm_v. This is often accompanied by high concentration of other pollutants, including bio-effluents such as viruses, and the importance of mitigating the transmission of airborne diseases has been highlighted by the COVID-19 pandemic. On the other hand, the relatively high CO₂ concentration of indoor environments presents a thermodynamic advantage for direct air capture (DAC) in comparison to atmospheric CO₂ concentration. This review aims to describe the issues associated with poor IAQ, and to demonstrate the potential of indoor CO₂ DAC to purify indoor air while generating a renewable carbon stream that can replace conventional carbon sources as a building block for chemical production, contributing to the circular economy.

High-Surface-Area Metalloporphyrin-Based Porous Ionic Polymers by the Direct Condensation Strategy for Enhanced CO2 Capture and Catalytic Conversion into Cyclic Carbonates

Metalloporphyrin-based porous organic polymers (POPs) that behave as advanced biomimetic nanoreactors have drawn continuous attention for heterogeneous CO₂ catalysis in the past decades. Inspired by the double activation model of epoxides, the design and synthesis of metalloporphyrin-based porous ionic polymers (PIPs) are considered as one of the most promising approaches for converting CO₂ to cyclic carbonates under cocatalyst- and solvent-free conditions. To overcome the obstacle of poor reaction activity of ionic monomers or highly irregular stacking architecture, in this paper, we have proposed and demonstrated a modular bottom-up approach for constructing a series of high-surface-area metalloporphyrin-based PIPs in high yields by the direct condensation strategy, thus boosting the close contact of multiple active sites and achieving the enhanced CO₂ capture and catalytic conversion into cyclic carbonates with high turnover frequencies under mild conditions. These recyclable aluminum-porphyrin-based PIPs are featured with high surface areas, prominent CO₂ adsorptive capacities, rigid porphyrin skeletons, and flexible ionic pendants, as well as the matched amounts and spatial positions of metal centers and ionic sites, in which is demonstrated to be one of the quite competitive catalysts. Therefore, this strategy of introducing ionic components into the porphyrin frameworks as flexible side chains rather than main chains and adjusting the reactivity ratios of comonomers by structure-oriented methods, provides feasible guidance for the multifunctionalization of metalloporphyrin-based POPs, thereby increasing the accessibility of multiple active sites and improving their synergistic catalytic behavior.

Research status, challenges and future prospects of renewable synthetic fuel catalysts for CO2 photocatalytic reduction conversion

In recent years, with global climate change, the utilization of carbon dioxide as a resource has become an important goal of human society to achieve carbon peaking and carbon neutrality. Among them, the catalytic conversion of carbon dioxide to generate renewable fuels has received great attention. As one of these methods, photocatalysis has its unique properties and mechanism, which can only rely on sunlight without inputting other energy. It is an emerging discipline with great development prospects. The core of photocatalysis lies in the development of photocatalysts with high activity, high selectivity, low cost, and high durability. This review first introduces the background and mechanism of photocatalysis, then introduces various types of photocatalysts based on different substrates, and analyzes the methods and mechanisms to improve the activity and selectivity of photocatalysts. Finally, combining the plasmon effect with photocatalysis, the review analyzes the promoting effect of the plasmon effect on the photocatalytic carbon dioxide synthesis of renewable fuels, which provides a new idea for it.

Auto-Tandem Copper-Catalyzed Carboxylation of Undirected Alkenyl C-H Bonds with CO2 by Harnessing β-Hydride Elimination

The exploration into challenging scenarios of the application of elementary reactions offers excellent opportunities for the development of unique transformations under organometallic catalysis. As a ubiquitous reaction of metal alkyl complexes, β-hydride elimination plays a crucial role in a number of important catalytic transformations. However, its functions in these catalytic cycles are limited to either releasing alkene products or generating isomerized intermediates through further migratory insertion. Herein, we report that the precise manipulation of β-hydride elimination enables an auto-tandem copper catalysis for the carboxylation of undirected alkenyl C-H bonds with CO₂. In this transformation, β-hydride elimination of an alkyl copper intermediate is facilitated, while its reaction with CO₂ is suppressed. The resulting copper hydride in turn reacts with CO₂ to provide access to a multitasking catalyst, which enables the tandem borylation/carboxylation of C-H bonds in two mechanistically distinct catalytic cycles.