Opening ZIF-8: A Catalytically Active Zeolitic Imidazolate Framework of Sodalite Topology with Unsubstituted Linkers

Pre-combustion gas separation by ZIF-8-polybenzimidazole mixed matrix membranes in the form of hollow fibres-long-term experimental study

Polybenzimidazole (PBI) is a promising and suitable membrane polymer for the separation of the H₂/CO₂ pre-combustion gas mixture due to its high performance in terms of chemical and thermal stability and intrinsic H₂/CO₂ selectivity. However, there is a lack of long-term separation studies with this polymer, particularly when it is conformed as hollow fibre membrane. This work reports the continuous measurement of the H₂/CO₂ separation properties of PBI hollow fibres, prepared as mixed matrix membranes with metal-organic framework (MOF) ZIF-8 as filler. To enhance the scope of the experimental approach, ZIF-8 was synthesized from the transformation of ZIF-L upon up-scaling the MOF synthesis into a 1 kg batch. The effects of membrane healing with poly(dimethylsiloxane), to avoid cracks and non-selective gaps, and operation conditions (use of sweep gas or not) were also examined at 200°C during approximately 51 days. In these conditions, for all the membrane samples studied, the H₂ permeance was in the 22-47 GPU range corresponding to 22-32 H₂/CO₂ selectivity values. Finally, this work continues our previous report on this type of application (Etxeberria-Benavides et al. 2020 Sep. Purif. Technol. 237, 116347 (doi:10.1016/j.seppur.2019.116347)) with important novelties dealing with the use of ZIF-8 for the mixed matrix membrane coming from a green methodology, the long-term gas separation testing for more than 50 days and the study on the membrane operation under more realistic conditions (e.g. without the use of sweep gas).

Pre-combustion gas separation by ZIF-8-polybenzimidazole mixed matrix membranes in the form of hollow fibres-long-term experimental study

Polybenzimidazole (PBI) is a promising and suitable membrane polymer for the separation of the H2/CO2 pre-combustion gas mixture due to its high performance in terms of chemical and thermal stability and intrinsic H2/CO2 selectivity. However, there is a lack of long-term separation studies with this polymer, particularly when it is conformed as hollow fibre membrane. This work reports the continuous measurement of the H2/CO2 separation properties of PBI hollow fibres, prepared as mixed matrix membranes with metal-organic framework (MOF) ZIF-8 as filler. To enhance the scope of the experimental approach, ZIF-8 was synthesized from the transformation of ZIF-L upon up-scaling the MOF synthesis into a 1 kg batch. The effects of membrane healing with poly(dimethylsiloxane), to avoid cracks and non-selective gaps, and operation conditions (use of sweep gas or not) were also examined at 200°C during approximately 51 days. In these conditions, for all the membrane samples studied, the H2 permeance was in the 22-47 GPU range corresponding to 22-32 H2/CO2 selectivity values. Finally, this work continues our previous report on this type of application (Etxeberria-Benavides et al. 2020 Sep. Purif. Technol. 237, 116347 (doi:10.1016/j.seppur.2019.116347)) with important novelties dealing with the use of ZIF-8 for the mixed matrix membrane coming from a green methodology, the long-term gas separation testing for more than 50 days and the study on the membrane operation under more realistic conditions (e.g. without the use of sweep gas).

Transport Diffusion of Linear Alkanes (C5-C16) through Thin Films of ZIF-8 as Assessed by Quartz Crystal Microgravimetry

We report uptake capacities and transport diffusivities, D, for each of eight linear alkanes (ranging from C₅ to C₁₆) in quartz crystal-supported films of solvent-evacuated ZIF-8. Analyses of the alkane uptake profiles revealed that the transport dynamics are governed by guest diffusion through metal-organic framework (MOF) (ZIF-8) crystallites rather than by rates of entry into films at the MOF/vapor interface. The obtained diffusivities range from just over 10^-18 m²/s to just under 10^-14 m²/s. Notably, minimum cross-sectional widths for all guests exceed the crystallographically measured width of ZIF-8's largest apertures and imply consistently with previous experimental and computational studies that apertures expand to accommodate guest uptake. On average, each additional carbon decreases the transport diffusivity of an alkane by twofold. Closer examination, however, reveals an odd-even effect such that linear alkanes having even numbers of carbons diffuse more rapidly than alkanes featuring one more or one less carbon atom. Thus, ZIF-8's differentiation of transport diffusivities for pairs of alkanes differing in length by only one carbon atom can be significantly greater than the aforementioned factor of 2. Elucidation of the microscopic basis for the odd-even behavior, however, awaits the outcome of molecular dynamics calculations that are beyond the scope of the present study. For compact, solvothermally prepared films, guest transport is dominated by 1D diffusion from the film/vapor interface and toward the underlying quartz crystal. For much lower density, electrophoretically deposited (EPD) films, crystallites behave nearly independently, and guest transport can be adequately modeled by assuming rapid permeation of macroscopic voids between crystallites, followed by entry and rate-limiting radial diffusion into isolated crystallites. One consequence is that EPD films can be much more rapidly infiltrated by molecular guests than can compact, solvothermally grown films. The combined results have potentially favorable implications for the development of kinetic separation schemes for closely related analytes.

A Facile and In-situ Methanol-mediated Fabrication of Low Pd Loading, High-efficiency and Size-selectivity Pd@ZIF-8 Hydrogenation Catalyst

In-situ encapsulation of tiny and well-dispersed Pd nanoparticles (Pd NPs) in zeolitic imidazolate frameworks (ZIFs) was firstly achieved using a one-pot and facile methanol-mediated growth approach, in which methanol served as both solvent and a mild reductant. The microstructure, morphology, crystallinity, porosity as well as evolution process of the catalysts were determined by TEM, XRD, N₂ adsorption and UV-vis spectra. Due to the complete encapsulation of such Pd NPs combined with ultrahigh surface area and uniform microporous structure of ZIF-8, the resulting Pd@ZIF-8-60 min nanocomposite exhibited more superior catalytic activity for olefins hydrogenation with TOF of 7436 h^-1 and excellent size selectivity than previously reported catalysts. Furthermore, the catalyst displays excellent recyclability for 1-octene hydrogenation and without any loss of the Pd active species.

Pebax Mixed-Matrix Membrane with Highly Dispersed ZIF-8@CNTs to Enhance CO2/N2 Separation

In this work, zeolitic imidazolate frameworks (ZIF-8) and carboxylated carbon nanotubes (CNTs) were compounded to prepare a kebab-like one-dimensional linear composite, ZIF-8@CNTs. The mixed-matrix membrane (MMM) for separating carbon dioxide is prepared by embedding it into the polymer matrix Pebax-1657. The results indicated the successful synthesis of the ZIF-8@CNT composite. The combination of ZIF-8 and carboxylated CNTs avoided the aggregation of ZIF-8 in the polymer, increased the free volume of the MMM, and enhanced the CO₂ adsorption performance and CO₂/N₂ separation performance. In addition, the interaction between CNTs and ZIF-8 provided a fast transport channel for CO₂ molecules and improved the mechanical properties of the MMM. The 5 wt % ZIF-8@CNT MMM showed the best separation performance with a CO₂ permeability of 225.5 Barrer and a CO₂/N₂ selectivity of 48.9, which exceeded the Robeson upper limit in 2008. The combination of high permeability and selectivity made Pebax/ZIF-8@CNT MMMs promising for industrial CO₂ separation applications.

Linker Exchange via Migration along the Backbone in Metal-Organic Frameworks

In metal-organic frameworks (MOFs), organic linkers are subject to postsynthetic exchange (PSE) when new linkers reach sites of PSE by diffusion. Here, we show that during PSE, a bulky organic linker is able to penetrate narrow-window MOF crystals. The bulky linker migrates by continuously replacing the linkers gating the otherwise impassable windows and serially occupying an array of backbone sites, a mechanism we term through-backbone diffusion. A necessary consequence of this process is the accumulation of missing-linker defects along the diffusion trajectories. Using fluorescence intensity and lifetime imaging microscopy, we found a gradient of missing-linker defects from the crystal surface to the interior, consistent with the spatial progression of PSE. Our success in incorporating bulky functional groups via PSE extends the scope of MOFs that can be used to host sizable, sophisticated guest species, including large catalysts or biomolecules, which were previously deemed only incorporable into MOFs of very large windows.

Delayed Linker Addition (DLA) Synthesis for Hybrid SOD ZIFs with Unsubstituted Imidazolate Linkers for Propylene/Propane and n-Butane/i-Butane Separations

We present a novel synthesis strategy termed delayed linker addition (DLA) to synthesize hybrid zeolitic-imidazolate frameworks containing unsubstituted imidazolate linkers (Im) with SOD topology (hereafter termed Im/ZIF-8). Im linker incorporation can create larger voids and apertures, which are important properties for gas storage and separation. To date, there have been only a handful of reports of Im linkers incorporated into ZIF-8 frameworks, typically requiring arduous and complicated post synthesis approaches. DLA, as reported here, is a simple one-step synthesis strategy allowing high incorporation of Im linker into the ZIF-8 framework while still retaining its SOD topology. We fabricated mixed-matrix membranes (MMMs) with 6FDA-DAM polymer and Im/ZIF-8 obtained via DLA as a filler. The Im/ZIF-8-containing MMMs showed excellent performance for both propylene/propane and n-butane/i-butane separation, displaying permeability and ideal selectivity well above the polymer upper bound. Moreover, highly detailed molecular simulations shed light to the aperture size and flexibility response of Im/ZIF-8 and its improved diffusivity as compared to ZIF-8.

The reactivity of an inorganic glass melt with ZIF-8

The thermal behaviour of ZIF-8, Zn(meIm)2 in the presence of a sodium fluoroaluminophosphate glass melt was probed through differential scanning calorimetry and thermogravimetric analysis. The structural integrity of ZIF-8 was then determined by a combination of powder X-ray diffraction, Fourier transform infra-red and 1H nuclear magnetic resonance spectroscopy.

Stable hydrogen-bonded organic frameworks for selective fluorescence detection of Al3+ and Fe3+ ions

Two pairs of HOFs were prepared with H4TCPE ligand under different conditions, and 3 and 4 have high stability and exhibit fluorescence quenching and enhancement toward Fe3+ and Al3+ ions, respectively.

Computational modelling of adsorption and diffusion properties of CO2 and CH4 in ZIF-8 for gas separation applications: a density functional theory approach

Understanding of zeolitic imidazolate framework-8 (ZIF-8) interaction with different gas molecules is crucial when ZIF-8 is used in gas separation.

Metal–organic frameworks and their derivatives as electrocatalysts for the oxygen evolution reaction

This review summarizes the recent progress on MOFs and their derivatives used for OER electrocatalysis in terms of their morphology, composition and structure–performance relationship.

Zeolitic imidazolate frameworks in analytical sample preparation

Zeolitic imidazolate frameworks are a class of metal-organic frameworks that are topologically isomorphic with zeolites. Zeolitic imidazolate frameworks are composed of tetrahedrally coordinated metal ions connected by imidazolate linkers and have a high porosity and chemical stability. Here, we summarize the progress made in the application of zeolitic imidazolate frameworks in sample preparation for analytical purposes. This review is focused on analytical methods based on liquid chromatography, gas chromatography, or capillary electrophoresis, where the use of zeolitic imidazolate frameworks has contributed to increasing the sensitivity and selectivity of the method. While bulk zeolitic imidazolate frameworks have been directly used in analytical sample preparation protocols, a variety of strategies for their magnetization or their incorporation into sorbent particles, monoliths, fibers, stir bars, or thin films, have been developed. These modifications have facilitated the handling and application of zeolitic imidazolate frameworks for a number of analytical sample treatments including magnetic solid-phase extraction, solid-phase microextraction, stir bar sorptive extraction, or thin film microextraction, among other techniques.

Designing a high-performance smart drug delivery system for the synergetic co-absorption of DOX and EGCG on ZIF-8

Due to the extreme pore volume and valuable surface area, zeolitic imidazole frameworks (ZIFs) are promising vehicles that enhance the delivery of therapeutic agents to tissues. Furthermore, these nanoporous materials have high stability in the pH and temperature of the surrounding healthy cells (37 °C and pH = 7) and an exotic potential to deform in carcinogenic environment (T > 37 °C and pH ∼ 5.5), which make them perfect smart drug delivery vehicle candidates. In this work, a series of molecular dynamics (MD) and metadynamics simulations have been performed to gain molecular insight into the mechanisms involved in the process of co-loading of doxorubicin (DOX) and EpiGalloCatechin-3 Gallate (EGCG) on ZIF-8, which form a smart drug delivery system (SDDS). The obtained results revealed that DOX was adsorbed on the carrier mostly through electrostatic interactions (E_coul = ∼−1200 kJ mol⁻¹, E_tot = −1700 kJ mol⁻¹), and EGCG was stacked on ZIF-8 mainly via van der Waals interactions (E_L-J = ∼−600 kJ mol⁻¹, E_tot = ∼−1200 kJ mol⁻¹). It is worth mentioning that the drug–drug L-J interactions (E_L-J = ∼500 kJ mol⁻¹) were also important in the co-loading process. The insertion of DOX and EGCG as additive agents to the initial ZIF-8/EGCG and ZIF-8/DOX systems led to the enhancement of the drug–carrier pair interactions to about ∼−2300 kJ mol⁻¹ and ∼−2000 kJ mol⁻¹, respectively. This finding implied that the drug–drug interactions had a complementary role in the development of SDDS via ZIF-8. From the metadynamics simulation, it was found that the geometry of the drugs is a determining factor in an efficient co-loading SDDS.

Adsorption free energy of a molecule depends on where and how the molecule meets ZIF-8 surface.

Solvent Choice in Metal-Organic Framework Linker Exchange Permits Microstructural Control

Linker exchange is a widely applied, robust technique for elaboration of metal-organic frameworks (MOFs) post-synthesis. The observation of core-shell microstructures under certain conditions was hypothesized to arise from diffusion rates into the MOF that are slower than linker exchange. Here the relative contributions of these processes are manipulated through solvent choice in order to modulate shell thickness and exchange extent. The findings allow tailoring MOF microstructure to application.

ZIF-8 as a promising drug delivery system for benznidazole: development, characterization, in vitro dialysis release and cytotoxicity

Chagas disease (CD), caused by the flagellate protozoan Trypanosoma cruzi, is one of the major public health problems in developing countries. Benznidazole (BNZ) is the only drug available for CD treatment in most countries, however, it presents high toxicity and low bioavailability. To address these problems this study used Zeolitic Imidazolate Framework-8 (ZIF-8), which has garnered considerable attention due to its potential applications, enabling the controlled delivery of drugs. The present work developed and characterized a BNZ@ZIF-8 system, and the modulation of BNZ release from the ZIF-8 framework was evaluated through the in vitro dialysis release method under sink conditions at different pH values. Moreover, the in vitro evaluation of cell viability and cytotoxicity by MTT assay were also performed. The dissolution studies corroborated that a pH sensitive Drug Delivery System capable of vectorizing the release of BNZ was developed, may leading to the improvement in the bioavailability of BNZ. The MTT assay showed that no statistically significant toxic effects occurred in the developed system, nor significant effects on cell viability.

Metal-Organic Framework Derived Nanozymes in Biomedicine

Nanozymes, which integrate the advantages of both nanomaterials and natural enzymes, have accumulated enormous research interest over the past decades because of the opportunity they provide to appreciate and further cultivate artificial enzymes with comparable properties. By mimicking the coordination environments of the catalytic sites in natural enzymes, nanozymes with confined nanostructures can serve as substitutes in many catalytic processes with comparable activity and robust stability even in harsh conditions. Since the pioneering report about peroxidase-mimicking ferromagnetic nanoparticles in 2007, nanozymes have been developed as specialized for nanomaterials with intrinsic enzyme-mimicking property. With the rapid development in nanoscience and nanotechnology, nanomaterials with superior advantages, such as large-scale production, desired activity, and robust stability, can bridge the natural enzymes with nanozymes.Metal-organic frameworks (MOFs) and their derivatives hold great promise to serve as direct surrogates of conventional enzymes for enzymatic reactions. According to their chemical nature, MOF-based nanozymes can be divided into three main categories: pristine MOFs, enzyme-encapsulated MOF composites, and MOF-based derivatives. Due to the versatility of metallic nodes and bridging linkers together with the feasibility of postsynthetic engineering and modification, MOFs and their derivatives are envisioned as one of the most appropriate surrogates for this purpose. Using MOFs as precursors or sacrificial templates, multiple MOF-based derivatives including carbon-based nanomaterials (e.g., heteroatom-doped carbon or carbon with M-N-C moiety), metal oxide/carbon nanoparticles, and metal/carbon nanomaterials can be rationally synthesized through one-step direct carbonization/oxidation or indirect post-synthesis treatments of MOFs (e.g., bridging linker-exchange and metallic node-doping). Compared with existing nanozymes, MOF-based derivatives open up a new avenue for constructing mesoporous nanozymes. In this way, the intrinsic mesoporous properties of MOFs can still be maintained, while the stability and activity can be greatly improved. In this Account, we highlight some important research advances in MOF-based derivatives (including M-N-C moieties (M = single metal atom), metal oxide/carbon, metal/carbon, and MOF derivatives obtained through postsynthetic linker exchange and metal doping strategies) with enzyme-mimicking activity. We also demonstrate that, through integrating physicochemical properties of mesoporous nanomaterials and enzymatic activities of natural enzymes, MOF-derived nanozymes can provide multifunctional platforms in biomedical fields such as antibacterial agents, biosensors, imaging, cancer therapy, and environmental protection. Finally, we propose future design principles and possible research approaches for deeper understanding of mechanisms, thus pointing out future research directions to offer more opportunities for the conventional enzyme-engineering industry.

Water Based Synthesis of ZIF-8 Assisted by Hydrogen Bond Acceptors and Enhancement of CO2 Uptake by Solvent Assisted Ligand Exchange

The aim of this work was to synthesize zeolitic imidazolate framework-8 (ZIF-8) by an alternative method and then modify the surface properties for enhancing the CO2 adsorption performance. The ZIF-8 was synthesized by a water based synthesis method using 2-methyl imidazole (2-MeIM) as a hydrogen bond donor and quaternary ammonium salts (QAS) as a hydrogen bond acceptor. The optimal synthesis conditions were investigated by varying (i) the order of precursor mixing during the synthesis process (ii) different QAS (tetrabutyl ammonium bromide (TBAB), tetraethyl ammonium bromide (TEAB) and trimethyl phenyl ammonium bromide (TMPAB)) and (iii) the ratio between 2-MeIM and QAS. The results show that the optimal synthesis condition was using TMPAB as the hydrogen bond acceptor with the ratio between 2-MeIM and TMPAB of 8:2 and in the order of first mixing both hydrogen bond donor and acceptor before adding Zn(NO3)2⋅6H2O solution. TMPAB can provide uniform size distribution with the smallest particle sizes of ZIF-8. This can be explained by the higher hydrogen bond strength between hydrogen bond donor (2-MeIM) and hydrogen bond acceptor (TMPAB) when compared with that of the rest of two QAS. The synthesized ZIF-8 was modified by solvent-assisted ligand exchange methods. The organic linker of ZIF-8 (2-MeIM) was exchanged by 2-aminobenzimidazole (2-NH2bZIM) and 2-phenylimidazole (2-PhIM). The CO2 uptake of modified ZIF-8 was enhanced upon exchanging with 2-NH2bZIM. The increase in CO2 uptake was due to an additional interaction between CO2 and exchanged imidazole linker and an increase in surface properties (higher surface area, pore size and pore volume).

The Progress and Prospect of Zeolitic Imidazolate Frameworks in Cancer Therapy, Antibacterial Activity, and Biomineralization

The progressive development of zeolitic imidazolate frameworks (ZIFs), as a subfamily of metal-organic frameworks (MOFs), and their unique features, including tunable pore size, large surface area, high thermal stability, and biodegradability/biocompatibility, have made them attractive in the field of biomedicine, especially for drug delivery and biomineralization applications. The high porosity of ZIFs gives them the opportunity for encapsulating a high amount of therapeutic drugs, proteins, imaging cargos, or a combination of them to construct advanced multifunctional drug delivery systems (DDSs) with combined therapeutic and imaging capabilities. This review summarizes recent strategies on the design and fabrication of ZIF-based nansystems and their exploration in the biomedical field. First, recent developments for the adjustment of particle size, functionality, and morphology of ZIFs are discussed, which are important for achieving optimized therapeutic/theranostic nanosystems. Second, recent trends on the application of ZIF nanocarriers for the loading of diverse cargos, including anticancer medicines, antibiotic drugs, enzymes, proteins, photosensitizers, as well as imaging and photothermal agents, are investigated in order to understand how multifunctional DDSs can be designed based on the ZIF nanoparticles to treat different diseases, such as cancer and infection. Finally, prospects on the future research direction and applications of ZIF-based nanomedicines are discussed.

Continuous-Flow Synthesis of ZIF-8 Biocomposites with Tunable Particle Size

Zeolitic imidazolate framework (ZIF) biocomposites show the capacity to protect and deliver biotherapeutics. To date, the progress in this research area is based on laboratory batch methods. Now, the first continuous flow synthetic method is presented for the encapsulation of a model protein (bovine serum albumin, BSA) and a clinical therapeutic (α1-antitrypsin, AAT) in ZIF-8. The in situ kinetics of nucleation, growth, and crystallization of BSA@ZIF-8 were studied by small-angle X-ray scattering. By controlling the injection time of ethanol, the particle growth could be quenched by ethanol-induced crystallization from amorphous particles to ZIF-8 crystals. The particle size of the biocomposite was tuned in the 40-100 nm range by varying residence time prior to introduction of ethanol. As a proof-of-concept, this procedure was used for the encapsulation of AAT in ZIF-8. Upon release of the biotherapeutic from the composite, the trypsin inhibitor function of AAT was preserved.

Vapor-phase linker exchange of metal-organic frameworks

Metal-organic frameworks (MOFs) have been attracting intensive attention because of their commendable potential in many applications. Postsynthetic modification for redesigning chemical characteristics and pore structures can greatly improve performance and expand functionality of MOF materials. Here, we develop a versatile vapor-phase linker exchange (VPLE) methodology for MOF modification. Through solvent-free and environment-friendly VPLE processing, various linker analogs with functional groups but not for straightforward MOF crystallization are inserted into frameworks as daughter building blocks. Besides single exchange for preparing MOFs with dual linkers, VPLE can further be performed by multistage operations to obtain MOF materials with multiple linkers and functional groups. The halogen-incorporated ZIFs exhibit good porosity, tunable molecular affinity, and impressive CO₂/N₂ and CH₄/N₂ adsorption selectivities up to 31.1 and 10.8, respectively, which are two to six times higher than those of conventional adsorbents. Moreover, VPLE can substantially enhance the compatibility of MOFs and polymers.

Phase dependent encapsulation and release profile of ZIF-based biocomposites

Biocomposites composed of Zeolitic Imidazolate Frameworks (ZIFs) are generating significant interest due to their facile synthesis, and capacity to protect proteins from harsh environments. Here we systematically varied the composition (i.e. relative amounts of ligand (2-methylimidazole), metal precursor (Zn(OAc)2·2H2O), and protein) and post synthetic treatments (i.e. washes with water or water/ethanol) to prepare a series of protein@ZIF biocomposites. These data were used to construct two ternary phase diagrams that showed the synthesis conditions employed gave rise to five different phases including, for the first time, biocomposites based on ZIF-CO3-1. We examined the influence of the different phases on two properties relevant to drug delivery applications: encapsulation efficiency and release profile. The encapsulation efficiencies of bovine serum albumin and insulin were phase dependent and ranged from 75% to 100%. In addition, release profiles showed that 100% protein release varied between 40 and 300 minutes depending on the phase. This study provides a detailed compositional map for the targeted preparation of ZIF-based biocomposites of specific phases and a tool for the straightforward analysis of the crystalline phases of ZIF based materials (web application named "ZIF phase analysis"). These data will facilitate the progress of ZIF bio-composites in the fields of biomedicine and biotechnology.

Site-specific growth of MOF-on-MOF heterostructures with controllable nano-architectures: beyond the combination of MOF analogues

The integration of different metal-organic frameworks (MOFs) into one system has led to the recent combinatorial innovation of various MOF-on-MOF hybrids; however control over their site-specific growth beyond MOF analogues remains challenging. In this work, a site-specific epitaxial-growth strategy is developed to synthesize MOF-on-MOF heterostructures comprised of two MOFs with totally different compositions. A guest MOF (ZIF-8) is epitaxially grown on the specific {110} facets of a host MOF (MIL-125). Moreover, the position of ZIF-8 growth on MIL-125 is also selectable by using MIL-125 hosts with {110} facets exposed on either the corner or side surface. Consequently, two MIL-125@ZIF-8 heterostructures with elaborately designed different architectures are synthesized. Benefiting from the high adsorption capacity of ZIF-8 and the photocatalytic activity of MIL-125, the MIL-125@ZIF-8 heterostructures demonstrate synergistically enhanced photocatalytic performance compared to single MOF subunits. Moreover, the corner growth leads to higher activity than the side growth of the MIL-125@ZIF-8 heterostructures. Our contribution paves the way for the rational design of composite MOFs with tunable compositions and nanostructures using the crystal engineering approach.

Thermodynamic Evidence of Structural Transformations in CO2-Loaded Metal-Organic Framework Zn(MeIm)2 from Heat Capacity Measurements

Metal-organic frameworks are a class of porous compounds with potential applications in molecular sieving, gas sequestration, and catalysis. One family of MOFs, zeolitic imidizolate frameworks (ZIFs), is of particular interest for carbon dioxide sequestration. We have previously reported the heat capacity of the sodalite topology of the zinc 2-methylimidazolate framework (ZIF-8), and in this Article we present the first low-temperature heat capacity measurements of ZIF-8 with various amounts of sorbed CO₂. Molar heat capacities from 1.8 to 300 K are presented for samples containing up to 0.99 mol of CO₂ per mol of ZIF-8. Samples with at least 0.56 mol of CO₂ per mol of ZIF-8 display a large, broad anomaly from 70 to 220 K with a shoulder on the low-temperature side, suggesting sorption-induced structural transitions. We attribute the broad anomaly partially to a gate-opening transition, with the remainder resulting from CO₂ rearrangement and/or lattice expansion. The measurements also reveal a subtle anomaly from 0 to 70 K in all samples that does not exist in the sorbate-free material, which likely reflects new vibrational modes resulting from sorbate/ZIF-8 interactions. These results provide the first thermodynamic evidence of structural transitions induced by CO₂ sorption in the ZIF-8 framework.

Sized-Controlled ZIF-8 Nanoparticle Synthesis from Recycled Mother Liquors: Environmental Impact Assessment

The effect of different deprotonators as well as washing steps and drying procedure on the synthesis of ZIF-8 from the mother liquor was investigated. The morphology, thermal stability, crystallinity, and surface area of the synthesized MOF were investigated. In addition, life-cycle assessment (LCA) or, in other words, eco-balance, was implemented as well. LCA compares the full range of environmental effects associated with the product by evaluating all inputs and outputs of material flows and predicting how such flow will affect the environment. ZIF-8 nanocrystals were synthesized from the recycled mother liquors using NaOH or NH₄OH thus preserving the main characteristics of the ZIF-8 nanoparticles derived from the initial synthesis. The rest of the characterization methods confirmed the suitability of the synthesis methodology considering the phase purity of the obtained ZIF-8 and nanometer size particles. This procedure enabled us not only to obtain phase pure ZIF-8 but also to substantially decrease the amount of solvent used for washing making it a sustainable process.

Simulation of the Adsorption and Release of Large Drugs by ZIF-8

The adsorption and release of two drugs 5FU (5-fluorouracil) and CAF (caffeine) into and from the ZIF-8 framework were simulated by the Gibbs-ensemble Monte Carlo approach employing two models for representing the sorbent: one without surface (ZIF-8P) and another with surface (ZIF-8S). The inner pores of ZIF-8S were inaccessible to the drugs, but accessible to the solvents (methanol or water). The ZIF-8P model is not recommended to describe the actual sorption processes because it lacks surface and solvent effects, which are reflected in the poor quantitative agreement with experimental results. The ZIF-8S model yielded results for the sorption of CAF in very close agreement with the experimental loading from methanol solution and release of the drug into water. For 5FU, the computer simulations provided qualitative agreements, which suggests that the sorbent-5FU interaction potentials should be improved. The excellent performance of the ZIF-8S model is due to its adequate description of the surface and by exposing adsorption sites such as undercoordinated zinc ions to interactions with large molecules. This was achieved by applying periodic conditions to a ZIF-8 nanocrystal, instead of an elementary cell, which is easy to generalize and used to describe several surface defects. Furthermore, the combination of this ZIF-8S model with the Monte Carlo method provides a very simple and efficient approach to simulate the inaccessibility of the ZIF-8 inner porosity to large molecules. Namely, any trial moves that inserted the drug within the pore were disregarded. This is a quite simple and general approach that can be promptly applied to a large number of MOF sorbents and of drugs that cannot access the inner pores.

Computational characterization of halogen vapor attachment, diffusion and desorption processes in zeolitic imidazolate framework-8

Computational simulation methods are used for characterizing the detailed attachment, diffusion and desorption of halogen vapor molecules in zeolitic imidazolate framework-8 (ZIF-8). The attachment energies of Cl2, Br2 and I2 are -55.2, -48.5 and -43.0 kJ mol-1, respectively. The framework of ZIF-8 is disrupted by Cl2, which bonds with Zn either on the surface or by freely diffusing into the cage. A framework deformation on the surface of ZIF-8 can be caused by the attachment of Br2, but only reorientation of the 2-methylimidazolate linkers (mIms) for I2. In diffusion, the halogen molecules have a tendency to vertically permeate the apertures of cages followed with swing effect implemented by the mIms. Larger rotation angles of mIms are caused by Br2 because of its stronger interaction with mIms than I2. A maximum of 7 Br2 or 5 I2 molecules can be accommodated in one cage. Br2 are clinging to the mIms and I2 are arranged as crystal layout in the cages, therefore in desorption processes molecules attached to the surface and free inside are desorbed while some remained. These results are beneficial for better understanding the adsorption and desorption processes of halogen vapors in the porous materials.

Exploring the Scope of Macrocyclic "Shoe-last" Templates in the Mechanochemical Synthesis of RHO Topology Zeolitic Imidazolate Frameworks (ZIFs)

The macrocyclic cavitand MeMeCH2 is used as a template for the mechanochemical synthesis of 0.2MeMeCH2@RHO-Zn16(Cl2Im)32 (0.2MeMeCH2@ZIF-71) and RHO-ZnBIm2 (ZIF-11) zeolitic imidazolate frameworks (ZIFs). It is shown that MeMeCH2 significantly accelerates the mechanochemical synthesis, providing high porosity products (BET surface areas of 1140 m2/g and 869 m2/g, respectively). Templation of RHO-topology ZIF frameworks constructed of linkers larger than benzimidazole (HBIm) was unsuccessful. It is also shown that cavitands other than MeMeCH2-namely MeHCH2, MeiBuCH2, HPhCH2, MePhCH2, BrPhCH2, BrC5CH2-can serve as effective templates for the synthesis of x(cavitand)@RHO-ZnIm2 products. The limitations on cavitand size and shape are explored in terms of their effectiveness as templates.

Relating structural disorder and melting in complex mixed ligand zeolitic imidazolate framework glasses

We report the formation of zeolitic imidazolate framework glasses incorporating three organic linkers, from their corresponding novel crystalline structures [Zn(Im2-x-ybImxmbImy)]. Structure-property relationships between chemical compositions and thermal properties are analysed, in addition to the effect on the nanoscale porosity of the glasses formed. A probabilistic model is used to explain melting and the glass transition temperatures of the obtained glasses and link to the nanoscale structural disorder of their crystalline starting structures.

Comparison of Catalytic Activity of ZIF-8 and Zr/ZIF-8 for Greener Synthesis of Chloromethyl Ethylene Carbonate by CO2 Utilization

The catalytic activity of both ZIF-8 and Zr/ZIF-8 has been investigated for the synthesis of chloromethyl ethylene carbonate (CMEC) using carbon dioxide (CO2) and epichlorohydrin (ECH) under solvent-free conditions. Published results from literature have highlighted the weak thermal, chemical, and mechanical stability of ZIF-8 catalyst, which has limited its large-scale industrial applications. The synthesis of novel Zr/ZIF-8 catalyst for cycloaddition reaction of ECH and CO2 to produce CMEC has provided a remarkable reinforcement to this weak functionality, which is a significant contribution to knowledge in the field of green and sustainable engineering. The enhancement in the catalytic activity of Zr in Zr/ZIF-8 can be attributed to the acidity/basicity characteristics of the catalyst. The comparison of the catalytic performance of the two catalysts has been drawn based on the effect of different reaction conditions such as temperature, CO2 pressure, catalyst loading, reaction time, stirring speed, and catalyst reusability studies. Zr/ZIF-8 has been assessed as a suitable heterogeneous catalyst outperforming the catalytic activities of ZIF-8 catalyst with respect to conversion of ECH, selectivity and yield of CMEC. At optimum conditions, the experimental results for direct synthesis of CMEC agree well with similar literature on Zr/MOF catalytic performance, where the conversion of ECH, selectivity and the yield of CMEC are 93%, 86%, and 76%, respectively.

Solvent-assisted linker exchange enabled preparation of cerium-based metal–organic frameworks constructed from redox active linkers

Preparation of Ce(iv)-based MOFs with redox active linkers, unattainable de novo, using SALE for the detoxification of chemical warfare agents.