Linear versus Dendritic Molecular Binders for Hydrogel Network Formation with Clay Nanosheets: Studies with ABA Triblock Copolyethers Carrying Guanidinium Ion Pendants

Preparation of a Strong Gelatin-Short Linear Glucan Nanocomposite Hydrogel by an in Situ Self-Assembly Process

Gelatin hydrogels exhibit excellent biocompatibility, nonimmunogenicity, and biodegradability, but they have limited applications in the food and medical industries because of their poor mechanical properties. Herein, we first developed an in situ self-assembly process for the preparation of gelatin-short linear glucan (SLG) nanocomposite hydrogels with enhanced mechanical strength. The microstructure, dynamic viscoelasticity, compression behavior, and thermal characteristics of the gelatin-SLG nanocomposite hydrogels were determined using scanning electron microscopy (SEM), dynamic rheological experiments, compression tests, and texture profile analysis tests. The SEM images revealed that nanoparticles were formed by the in situ self-assembly of SLG in the gelatin matrix and that the size of these nanoparticles ranged between 200 and 600 nm. The pores of the nanocomposite hydrogels were smaller than those of the pure gelatin hydrogels. Transmission electron microscopy images and X-ray diffraction further confirmed the presence of SLG nanoparticles with spherical shapes and B-type structures. Compared with pure gelatin hydrogels, the nanocomposite hydrogels exhibited improved mechanical behavior. Notably, the hardness and maximum values of the compressive stress of gelatin-SLG nanocomposites containing 5% SLG increased by about 2-fold and 3-fold, respectively, compared to the corresponding values of pure gelatin hydrogels.

A crown-ether-based moldable supramolecular gel with unusual mechanical properties and controllable electrical conductivity prepared by cation-mediated cross-linking

Supramolecular gels that possess high mechanical properties and unusual electrical conductivity were prepared by incorporating Cs⁺.

Deformation Drives Alignment of Nanofibers in Framework for Inducing Anisotropic Cellulose Hydrogels with High Toughness

Deformation-driven alignment of macromolecules or nanofibers leading to anisotropy is a challenge in functional soft materials. Here, tough cellulose hydrogels that exhibited deformation-induced anisotropy are fabricated by reacting cellulose with a small amount of epichlorohydrin (EPI) in LiOH/urea solution and subsequent treating with dilute acid. The loosely cross-linked network that was obtained via chemical cross-linking of cellulose with EPI as a large framework maintained the elasticity of hydrogels, whereas nanofibers produced by the acid treatment formed physical cross-linked networks through hydrogen bonds which could efficiently dissipated mechanical energy. Meanwhile, the nanofibers could further aggregate to form submicrobundles and participate in the formation of frameworks during the acid treatment. Under deformation, the nanofibers and submicrobundles in the physical networks synchronize easily to align with the large framework, generating the rapidly responsive birefringence behaviors with highly stable colors. Thus, the cellulose hydrogels possessing sensitively mechano-responsive behavior could be utilized as a dynamic light switch and a soft sensor to accurately detect small external force, respectively. This work opens a novel pathway to construct tough and mechanoresponsive hydrogels via a green conversion of natural polysaccharide.

Inorganic/Organic Double-Network Gels Containing Ionic Liquids

Highly robust ion gels, termed double-network (DN) ion gels, composed of inorganic/organic interpenetrating networks and a large amount of ionic liquids (ILs), are fabricated. The DN ion gels with an 80 wt% IL content show extraordinarily high mechanical strength: more than 28 MPa of compressive fracture stress. In the DN ion gel preparation, a brittle inorganic network of physically bonded silica nanoparticles and a ductile organic network of polydimethylacrylamide (PDMAAm) are formed in the IL. Because of the different reaction mechanisms of the inorganic/organic networks, the DN ion gels can be formed by an easy and free-shapeable one-pot synthesis. They can be prepared in a controllable manner by manipulating the formation order of the inorganic and organic networks via not only multistep but also single-step processes. When silica particles form a network prior to the PDMAAm network formation, DN ion gels can be prepared. The brittle silica particle network in the DN ion gel, serving as sacrificial bonds, easily ruptures under loading to dissipate energy, while the ductile PDMAAm network maintains the shape of the material by the rubber elasticity. Given the reversible physical bonding between the silica particles, the DN ion gels exhibit a significant degree of self-recovery by annealing.

Mussel-Inspired Thermoresponsive Polypeptide-Pluronic Copolymers for Versatile Surgical Adhesives and Hemostasis

Inspired by marine mussel adhesive proteins, polymers with catechol side groups have been extensively explored in industrial and academic research. Here, Pluronic L-31 alcoholate ions were used as the initiator to prepare a series of polypeptide-Pluronic-polypeptide triblock copolymers via ring-opening polymerization of l-DOPA-N-carboxyanhydride (DOPA-NCA), l-arginine-NCA (Arg-NCA), l-cysteine-NCA (Cys-NCA), and ε-N-acryloyl lysine-NCA (Ac-Lys-NCA). These copolymers demonstrated good biodegradability, biocompatibility, and thermoresponsive properties. Adhesion tests using porcine skin and bone as adherends demonstrated lap-shear adhesion strengths up to 106 kPa and tensile adhesion strengths up to 675 kPa. The antibleeding activity and tissue adhesive ability were evaluated using a rat model. These polypeptide-Pluronic copolymer glues showed superior hemostatic properties and superior effects in wound healing and osteotomy gaps. Complete healing of skin incisions and remodeling of osteotomy gaps were observed in all rats after 14 and 60 days, respectively. These copolymers have potential uses as tissue adhesives, antibleeding, and tissue engineering materials.

Hydrogel Nanocomposites with Independently Tunable Rheology and Mechanics

Hydrogels are an attractive class of biomaterials for minimally invasive local drug delivery given their injectability, tunability, high water content, and biocompatibility. Broad applicability though is challenged: relatively modest mechanical properties restrict use to soft tissues, while flow properties necessary for injectability limit implantation to dried, enclosed tissues to minimize material migration during gelation. To address these dual concerns, we designed an injectable nanocomposite hydrogel based on dextran aldehyde and a poly(amido amine) dendrimer doped with phyllosilicate nanoplatelet fillers. Balance of components allows for exfoliation of nanoplatelets, significantly changing macromer solution flow, facilitating injection and manipulation in a wide variety of implantation contexts while enhancing compressive modulus of hydrogels at low loading. Importantly, rheological and mechanical effects were dependent on aspect ratio, with high aspect ratio nanoplatelets having much stronger effects on mechanics and low aspect ratio nanoplatelets having stronger effects on rheology, enabling nearly independent control of rheological and mechanical properties. Nanoplatelets enhanced hydrogel properties at a filler loading substantially lower than that of comparably sized nanoparticles. We present a model to explain the role that aspect ratio plays in control of rheology and mechanics in nanoplatelet-containing hydrogels, with lessons for further nanocomposite hydrogel development. This low-cost biocompatible material may be useful as a drug delivery platform in challenging implantation environments.

One-Step Fabrication of Biocompatible Multifaceted Nanocomposite Gels and Nanolayers

Nanocomposite gels are a fascinating class of polymeric materials with an integrative assembly of organic molecules and organic/inorganic nanoparticles, offering a unique hybrid network with synergistic properties. The mechanical properties of such networks are similar to those of natural tissues, which make them ideal biomaterial candidates for tissue engineering applications. Existing nanocomposite gel systems, however, lack many desirable gel properties, and their suitability for surface coatings is often limited. To address this issue, this article aims at generating multifunctional nanocomposite gels that are injectable with an appropriate time window, functional with bicyclononynes (BCN), biocompatible and slowly degradable, and possess high mechanical strength. Further, the in situ network-forming property of the proposed system allows the fabrication of ultrathin nanocomposite coatings in the submicrometer range with tunable wettability and roughness. Multifunctional nanocomposite gels were fabricated under cytocompatible conditions (pH 7.4 and T = 37 °C) using laponite clays, isocyanate (NCO)-terminated sP(EO-stat-PO) macromers, and clickable BCN. Several characterization techniques were employed to elucidate the structure-property relationships of the gels. Even though the NCO-sP(EO-stat-PO) macromers could form a hydrogel network in situ on contact with water, the incorporation of laponite led to significant improvement of the mechanical properties. BCN motifs with carbamate links were used for a metal-free click ligation with azide-functional molecules, and the subsequent gradual release of the tethered molecules through the hydrolysis of carbamate bonds was shown. The biocompatibility of the hydrogels was examined through murine macrophages, showing that the material composition strongly affects cell behavior.

Guanidinium-based “molecular glues” for modulation of biomolecular functions

This tutorial review highlights “molecular glues” designed for manipulation of biomolecular assemblies, drug delivery systems, and modulation of biomolecular functions.

Retracted Article: Spatially resolved mechanical properties of photo-responsive azobenzene-based supramolecular gels

The mechanical properties of azobenzene-based gelators were finely controlled by UV irradiation.

Scalable manufacturing of biomimetic moldable hydrogels for industrial applications

Hydrogels are a class of soft material that is exploited in many, often completely disparate, industrial applications, on account of their unique and tunable properties. Advances in soft material design are yielding next-generation moldable hydrogels that address engineering criteria in several industrial settings such as complex viscosity modifiers, hydraulic or injection fluids, and sprayable carriers. Industrial implementation of these viscoelastic materials requires extreme volumes of material, upwards of several hundred million gallons per year. Here, we demonstrate a paradigm for the scalable fabrication of self-assembled moldable hydrogels using rationally engineered, biomimetic polymer-nanoparticle interactions. Cellulose derivatives are linked together by selective adsorption to silica nanoparticles via dynamic and multivalent interactions. We show that the self-assembly process for gel formation is easily scaled in a linear fashion from 0.5 mL to over 15 L without alteration of the mechanical properties of the resultant materials. The facile and scalable preparation of these materials leveraging self-assembly of inexpensive, renewable, and environmentally benign starting materials, coupled with the tunability of their properties, make them amenable to a range of industrial applications. In particular, we demonstrate their utility as injectable materials for pipeline maintenance and product recovery in industrial food manufacturing as well as their use as sprayable carriers for robust application of fire retardants in preventing wildland fires.

Control of the mechanical strength of a bipyridine-based polymeric gel from linear nanofibre to helix with a chiral dopant

A mixture of building blocks 1 and 2 having hydrazine moieties and aldehyde moieties, respectively, formed a gel by a hydrazone reaction in the absence and presence of cyclohexane diamines as chiral dopants and Fe(2+). In particular, the mechanical strength of the helical gel prepared from 1 and 2 in the presence of a chiral dopant and Fe(2+) was ca. 10-fold stronger as compared to that of the gel prepared from the building blocks 1 and 2 without a chiral dopant and Fe(2+). The improved mechanical strength was attributed to the formation of a helix. The results indicate that the mechanical strength of gels obtained by hydrazone reaction could be controlled by a chiral dopant and Fe(2+).

Boronic Acid-Appended Molecular Glues for ATP-Responsive Activity Modulation of Enzymes

Water-soluble linear polymers GumBAn (m/n = 18/6, 12/12, and 6/18) with multiple guanidinium ion (Gu(+)) and boronic acid (BA) pendants in their side chains were synthesized as ATP-responsive modulators for enzyme activity. GumBAn polymers strongly bind to the phosphate ion (PO4(-)) and 1,2-diol units of ATP via the Gu(+) and BA pendants, respectively. As only the Gu(+) pendants can be used for proteins, GumBAn is able to modulate the activity of enzymes in response to ATP. As a proof-of-concept study, we demonstrated that trypsin (Trp) can be deactivated by hybridization with GumBAn. However, upon addition of ATP, Trp was liberated to retrieve its hydrolytic activity due to a higher preference of GumBAn toward ATP than Trp. This event occurred in a much lower range of [ATP] than reported examples. Under cellular conditions, the hydrolytic activity of Trp was likewise modulated.

Dendrimers and Dendrons as Versatile Building Blocks for the Fabrication of Functional Hydrogels

Hydrogels have emerged as a versatile class of polymeric materials with a wide range of applications in biomedical sciences. The judicious choice of hydrogel precursors allows one to introduce the necessary attributes to these materials that dictate their performance towards intended applications. Traditionally, hydrogels were fabricated using either polymerization of monomers or through crosslinking of polymers. In recent years, dendrimers and dendrons have been employed as well-defined building blocks in these materials. The multivalent and multifunctional nature of dendritic constructs offers advantages in either formulation or the physical and chemical properties of the obtained hydrogels. This review highlights various approaches utilized for the fabrication of hydrogels using well-defined dendrimers, dendrons and their polymeric conjugates. Examples from recent literature are chosen to illustrate the wide variety of hydrogels that have been designed using dendrimer- and dendron-based building blocks for applications, such as sensing, drug delivery and tissue engineering.

“Smart” drug loaded nanoparticle delivery from a self-healing hydrogel enabled by dynamic magnesium–biopolymer chemistry

A new self-healing hydrogel is developed using dynamic coordinate bonds between drug loaded MgSiO₃ nanoparticles and bisphosphonate functionalized hyaluronic acid. The nanocomposite network is stable at neutral pH, but is disassembled in an acidic environment, providing “smart” drug release.

Nanocomposite hydrogels of LAPONITE® mixed with polymers bearing dopamine and cholic acid pendants

A nanocomposite hydrogel system was formulated by mixing LAPONITE® with polymers bearing dopamine and cholic acid pendants.

Mechanically strong and thermosensitive hydrogels reinforced with cellulose nanofibrils

Thermosensitive hydrogels possessing excellent mechanical strength were synthesized with cellulose nanofibrils as a reinforcing agent.

Recent advances in clay mineral-containing nanocomposite hydrogels

Clay mineral-containing nanocomposite hydrogels have been proven to have exceptional composition, properties, and applications, and consequently have attracted a significant amount of research effort over the past few years. The objective of this paper is to summarize and evaluate scientific advances in clay mineral-containing nanocomposite hydrogels in terms of their specific preparation, formation mechanisms, properties, and applications, and to identify the prevailing challenges and future directions in the field. The state-of-the-art of existing technologies and insights into the exfoliation of layered clay minerals, in particular montmorillonite and LAPONITE®, are discussed first. The formation and structural characteristics of polymer/clay nanocomposite hydrogels made from in situ free radical polymerization, supramolecular assembly, and freezing-thawing cycles are then examined. Studies indicate that additional hydrogen bonding, electrostatic interactions, coordination bonds, hydrophobic interaction, and even covalent bonds could occur between the clay mineral nanoplatelets and polymer chains, thereby leading to the formation of unique three-dimensional networks. Accordingly, the hydrogels exhibit exceptional optical and mechanical properties, swelling-deswelling behavior, and stimuli-responsiveness, reflecting the remarkable effects of clay minerals. With the pivotal roles of clay minerals in clay mineral-containing nanocomposite hydrogels, the nanocomposite hydrogels possess great potential as superabsorbents, drug vehicles, tissue scaffolds, wound dressing, and biosensors. Future studies should lay emphasis on the formation mechanisms with in-depth insights into interfacial interactions, the tactical functionalization of clay minerals and polymers for desired properties, and expanding of their applications.

Three-Dimensional Nanoporous Cellulose Gels as a Flexible Reinforcement Matrix for Polymer Nanocomposites

With the world's focus on utilization of sustainable natural resources, the conversion of wood and plant fibers into cellulose nanowhiskers/nanofibers is essential for application of cellulose in polymer nanocomposites. Here, we present a novel fabrication method of polymer nanocomposites by in-situ polymerization of monomers in three-dimensionally nanoporous cellulose gels (NCG) prepared from aqueous alkali hydroxide/urea solution. The NCG have interconnected nanofibrillar cellulose network structure, resulting in high mechanical strength and size stability. Polymerization of the monomer gave P(MMA/BMA)/NCG, P(MMA/BA)/NCG nanocomposites with a volume fraction of NCG ranging from 15% to 78%. SEM, TEM, and XRD analyses show that the NCG are finely distributed and preserved well in the nanocomposites after polymerization. DMA analysis demonstrates a significant improvement in tensile storage modulus E' above the glass transition temperature; for instance, at 95 °C, E' is increased by over 4 orders of magnitude from 0.03 MPa of the P(MMA/BMA) up to 350 MPa of nanocomposites containing 15% v/v NCG. This reinforcement effect can be explained by the percolation model. The nanocomposites also show remarkable improvement in solvent resistance (swelling ratio of 1.3-2.2 in chloroform, acetone, and toluene), thermal stability (do not melt or decompose up to 300 °C), and low coefficients of thermal expansion (in-plane CTE of 15 ppm·K(-1)). These nanocomposites will have great promising applications in flexible display, packing, biomedical implants, and many others.