Well-Dispersed Ruthenium in Mesoporous Crystal TiO2 as an Advanced Electrocatalyst for Hydrogen Evolution Reaction

Graphene/MoS2/FeCoNi(OH)x and Graphene/MoS2/FeCoNiPx multilayer-stacked vertical nanosheets on carbon fibers for highly efficient overall water splitting

Development of excellent and cheap electrocatalysts for water electrolysis is of great significance for application of hydrogen energy. Here, we show a highly efficient and stable oxygen evolution reaction (OER) catalyst with multilayer-stacked hybrid structure, in which vertical graphene nanosheets (VGSs), MoS₂ nanosheets, and layered FeCoNi hydroxides (FeCoNi(OH)_x) are successively grown on carbon fibers (CF/VGSs/MoS₂/FeCoNi(OH)_x). The catalyst exhibits excellent OER performance with a low overpotential of 225 and 241 mV to attain 500 and 1000 mA cm^-2 and small Tafel slope of 29.2 mV dec^-1. Theoretical calculation indicates that compositing of FeCoNi(OH)_x with MoS₂ could generate favorable electronic structure and decrease the OER overpotential, promoting the electrocatalytic activity. An alkaline water electrolyzer is established using CF/VGSs/MoS₂/FeCoNi(OH)_x anode for overall water splitting, which generates a current density of 100 mA cm^-2 at 1.59 V with excellent stability over 100 h. Our highly efficient catalysts have great prospect for water electrolysis.

Ordered Macroporous Superstructure of Nitrogen-Doped Nanoporous Carbon Implanted with Ultrafine Ru Nanoclusters for Efficient pH-Universal Hydrogen Evolution Reaction

The electrochemical hydrogen evolution reaction (HER) is an attractive technology for the mass production of hydrogen. Ru-based materials are promising electrocatalysts owing to the similar bonding strength with hydrogen but much lower cost than Pt catalysts. Herein, an ordered macroporous superstructure of N-doped nanoporous carbon anchored with the ultrafine Ru nanoclusters as electrocatalytic micro/nanoreactors is developed via the thermal pyrolysis of ordered macroporous single crystals of ZIF-8 accommodating Ru(III) ions. Benefiting from the highly interconnected reticular macro-nanospaces, this superstrucure affords unparalleled performance for pH-universal HER, with order of magnitude higher mass activity compared to the benchmark Pt/C. Notably, an exceptionally low overpotential of only 13 mV@10 mA cm^-2 is required for HER in alkaline solution, with a low Tafel slope of 40.41 mV dec^-1 and an ultrahigh turnover frequency value of 1.6 H₂ s^-1 at 25 mV, greatly outperforming Pt/C. Furthermore, the hydrogen generation rates are almost twice those of Pt/C during practical overall alkaline water splitting. A solar-to-hydrogen system is also demonstrated to further promote the application. This research may open a new avenue for the development of advanced electrocatalytic micro/nanoreactors with controlled morphology and excellent performance for future energy applications.

Gd-Doped Ni-Oxychloride Nanoclusters: New Nanoscale Electrocatalysts for High-Performance Water Oxidation through Surface and Structural Modification

Oxygen evolution reaction (OER) is a bottleneck process in the water-splitting module for sustainable and clean energy production. Transition metal-based electrocatalysts can be effective as water-splitting catalytic materials because of their appropriate redox properties and natural abundance, but the slow kinetics because of strong adsorption and consequently slow desorption of intermediates on the active sites of catalysts severely hamper the dynamics of the released molecular oxygen and thus remains a formidable challenge. Herein, we report the development of structurally and surface-modified PA-Gd-Ni(OH)₂Cl (partially alkylated gadolinium-doped nickel oxychloride) nanoclusters (NCs, size ≤ 3 nm) for enhanced and stable OER catalysis at low overpotential and high turnover frequency. The ameliorated catalytic performance was achieved by controlling the surface coverage of these NCs with hydrophobic ligands and through the incorporation of electronegative atoms to facilitate easy adsorption/desorption of intermediates on the catalyst surface, thus improving the liberation of O₂. Such a surface and structural modification and uniform distribution at the nanoscale length are indeed worth considering to selectively tune the catalytic potential and further modernize the electrode materials for the challenging OER process.

Photo-driven selective CO2 reduction by H2O into ethanol over Pd/Mn–TiO2: suitable synergistic effect between Pd and Mn sites

The Mn–Pd interaction of Pd/Mn–TiO₂ is a promising catalyst to enhance C₂H₅OH selectivity since Pd with a strong ability to capture and transport electrons and Mn with multifarious activation of the reactant (CO₂ and H₂O).

Non-Thermal Plasma-Modified Ru-Sn-Ti Catalyst for Chlorinated Volatile Organic Compound Degradation

Chlorinated volatile organic compounds (CVOCs) are vital environmental concerns due to their low biodegradability and long-term persistence. Catalytic combustion technology is one of the more commonly used technologies for the treatment of CVOCs. Catalysts with high low-temperature activity, superior selectivity of non-toxic products, and resistance to chlorine poisoning are desirable. Here we adopted a plasma treatment method to synthesize a tin-doped titania loaded with ruthenium dioxide (RuO2) catalyst, possessing enhanced activity (T90%, the temperature at which 90% of dichloromethane (DCM) is decomposed, is 262 °C) compared to the catalyst prepared by the conventional calcination method. As revealed by transmission electron microscopy, X-ray diffraction, N2 adsorption, X-ray photoelectron spectroscopy, and hydrogen temperature-programmed reduction, the high surface area of the tin-doped titania catalyst and the enhanced dispersion and surface oxidation of RuO2 induced by plasma treatment were found to be the main factors determining excellent catalytic activities.

Excessive Se on RuSe2 nanocrystals to accelerate water dissociation for the enhanced electrocatalytic hydrogen evolution reaction

Selenium-enriched RuSe2 (RuxSe) nanocrystals as electrocatalysts for the HER in basic media have been synthesized via a facile hydrothermal method followed by a calcination process. The catalytic activity of the obtained RuxSe nanocrystals is greatly dependent on calcination temperatures. The nanocrystals obtained at 400 °C (RuxSe-400) demonstrate the highest HER activity with a low overpotential of 45 mV to deliver a current density of 10 mA cm-2 and a small Tafel slope of 31.4 mV dec-1. The enhanced catalytic HER performance of RuxSe-400 could be attributed to the excessive Se on the RuSe2 nanocrystal surface. Density functional theory (DFT) calculations reveal that the excessive Se would lower the energy barrier for water dissociation and lessen the dependence on the Ru sites for OH* adsorption but have a negligible effect on hydrogen adsorption energy, leading to an accelerated HER process. Furthermore, the excessive Se on the nanocrystal surface further endows the catalyst with promoted charge-transfer kinetics, ensuring a more efficient catalytic reaction. The strategy herein for the design of highly efficient HER catalysts by engineering the separation of different intermediate (H* and OH*) adsorption sites is expected to be extended to other electrocatalysts for high-efficiency energy conversion.

Constructing porous TiO2 crystals by an etching process for long-life lithium ion batteries

"Zero strain" materials, which have no volume change when charging and discharging, show ultra-long cycling stabilities when used as lithium-ion battery anodes, making them an area of extreme interest in this decade. For a typical anatase TiO₂ crystal, the volume change is 3-4% during Li insertion/extraction, which is not "zero strain". As the Ti/O packing in the TiO₂ lattice is too tight, there is insufficient void space for Li insertion, leading to volume expansion and structural collapse. Herein, pseudo-"zero-strain" TiO₂ is achieved via designing TiO₂ crystals with abundant inner mesopores, making Ti/O loose-packed via the acid-etching of K₂Ti₈O₁₇, providing sufficient space for Li intercalation. Instead of the traditional cut-off potential of 1 V used for Ti-/Nb-based anodes, we choose 0.01 V as the cut-off to make the best of the extra capacity contributed by the mesopores. As expected, plenty of mesopores could serve as "Li⁺-reservoirs" for fast lithium storage, demonstrating exceptional high-rate performance with an average capacity of 109.6 mA h g^-1 after 30 000 cycles at 60 C and 100 mA h g^-1 at 120 C. Such a strategy of combining a mesoporous structure and cut-off potential regulation may pave a solid pathway for constructing novel high-power anodes.

A rationally designed 3D interconnected porous tin dioxide cube with reserved space for volume expansion as an advanced anode of lithium-ion batteries

To work against the volume expansion (∼300%) of SnO₂ during lithiation, here a sub-micro sized, interconnected, and porous SnO₂ cube with rationally designed reserved space (∼375%) is synthesized via an artful topochemistry route (CaSn(OH)₆-CaSnO₃-SnO₂). Owing to its microstructure, this novel material harvests enhanced lithium-storage performance.

Growth of Highly Active Amorphous RuCu Nanosheets on Cu Nanotubes for the Hydrogen Evolution Reaction in Wide pH Values

Rational design of low-cost, highly efficient, and stable electrocatalysts for the hydrogen evolution reaction (HER) has attracted wide attention. Herein, 3D RuCu nanocrystals (NCs) are successfully synthesized by a facile wet chemistry method, in which amorphous RuCu nanosheets are directly grown on crystalline Cu nanotubes (NTs). Importantly, the obtained 3D RuCu NCs only need 18 and 73 mV to deliver the current density of 10 mA cm^-2 for HER in alkaline and neutral media, respectively. Density functional theory calculations and experiments reveal that the Ru sites on the surface of amorphous nanosheets are the highly active centers for HER. Moreover, this catalyst can expose more surface area for water splitting compared to pure nanosheets because the unique 3D structure can effectively prevent the aggregation of nanosheets. Meanwhile, the interface between amorphous nanosheets and crystalline NTs is essential to boost the HER performance because the amorphous phase with many unsaturated bonds can facilitate adsorption of reactants and crystalline Cu with superior conductivity can promote the transfer of electrons. This work provides a facile method to prepare an original 3D Ru-based electrocatalyst with highly active HER performance in wide pH values.

Ultrahigh electrocatalytic activity with trace amounts of platinum loadings on free-standing mesoporous titanium nitride nanotube arrays for hydrogen evolution reactions

Minimizing Pt loadings on electrocatalysts for hydrogen evolution reactions (HERs) is essential for their commercial applications. Herein, free-standing mesoporous titanium nitride nanotube arrays (TiN NTAs) were fabricated to serve as a substrate for Pt loadings in trace amounts. TiN NTAs were prepared by thermal treatment of anodic TiO2 NTAs at 750 °C for 3 h in a NH3 atmosphere. The uniform TiN NTAs showed an inner diameter of ∼80 nm and a length of ∼7 μm, with many mesoporous holes ranging from 5 to 10 nm in diameter on the nanotube walls. Pt species dissolved from the Pt counter electrode in electrochemical cycling were redeposited on the mesoporous TiN NTAs to produce Pt-TiN NTAs with an ultra-low Pt loading of 8.3 μg cm-2. Pt-TiN NTAs exhibited 15-fold higher mass activity towards HER than the benchmark 20 wt% Pt/C in acidic media, with an overpotential of 71 mV vs. RHE at a current density of 10 mA cm-2, a Tafel slope value of 46.4 mV dec-1 and excellent stability. The performance of Pt-TiN NTAs is also much better than that of Pt species deposited on non-mesoporous nanotube arrays due to the shortcuts originating from the mesoporous holes on the nanotube walls for electron and mass transfer.

Stable Rhodium (IV) Oxide for Alkaline Hydrogen Evolution Reaction

Water electrolysis in alkaline electrolyte is an attractive way toward clean hydrogen energy via the hydrogen evolution reaction (HER), whereas the sluggish water dissociation impedes the following hydrogen evolution. Noble metal oxides possess promising capability for catalyzing water dissociation and hydrogen evolution; however, they are never utilized for the HER due to the instability under the reductive potential. Here it is shown that compressive strain can stabilize RhO₂ clusters and promote their catalytic activity. To this end, a strawberry-like structure with RhO₂ clusters embedded in the surface layer of Rh nanoparticles is engineered, in which the incompatibility between the oxide cluster and the metal substrate causes intensive compressive strain. As such, RhO₂ clusters remain stable at a reduction potential up to -0.3 V versus reversible hydrogen electrode and present an alkaline HER activity superior to commercial Pt/C.

Hierarchical Porous Molybdenum Carbide Based Nanomaterials for Electrocatalytic Hydrogen Production

The electrocatalytic hydrogen evolution reaction (HER) for the preparation of hydrogen fuel is a very promising technology to solve the shortage of hydrogen storage. However, in practical applications, HER catalysts with excellent performance and moderate price are very rare. Molybdenum carbide (Mo_xC) has attracted extensive attention due to its electronic structure and natural abundance. Here, a comprehensive review of the preparation and performance control of hierarchical porous molybdenum carbide (HP-Mo_xC) based catalysts is summarized. The methods for preparing hierarchical porous materials and the regulation of their HER performance are mainly described. Briefly, the HP-Mo_xC based catalysts were prepared by template method, morphology-conserved transformations method, and secondary conversion method of an organic-inorganic hybrid material. The intrinsic HER kinetics are enhanced by the introduction of a carbon-based support, heteroatom doping, and the construction of a heterostructure. Finally, the future development of HP-Mo_xC based catalysts is prospected in this review.

Geometric Structure and Electronic Polarization Synergistically Boost Hydrogen Evolution Kinetics in Alkaline Medium

Efficient electrocatalysts for the hydrogen evolution reaction (HER) are significant for the utilization of hydrogen as a fuel, particularly under alkaline conditions. However, the sluggish kinetics of HER remains a challenge. Here we demonstrate an efficient HER catalyst comprising Ru and AgCl nanoparticles anchored on Ag nanowires (Ru/AgCl@Ag), which delivers a low overpotential of 12 mV at 10 mA cm^-2 and a Tafel slope of 38 mV decade^-1. A high mass activity of 214 mA mg^-1 at an overpotential of 25 mV and a long-term durability in 1.0 M KOH are observed. In combination with computational simulations, we find that the high electronegativity of chlorine in AgCl and d-band electrons from Ru synergistically destabilize the water molecule and modulate H adsorption/desorption on the surface of Ru/AgCl@Ag, respectively. This work opens a promising avenue for the facile design and application of highly active and stable composite electrocatalysts toward water splitting.

Surface Engineering on Nickel-Ruthenium Nanoalloys Attached Defective Carbon Sites as Superior Bifunctional Electrocatalysts for Overall Water Splitting

Herein, we report a novel catalyst of nickel-ruthenium alloy nanoparticles (NPs) homogeneously enriched in the wall of multiwalled carbon nanotubes (denoted as NiRu@MWCNTs) via a facile plasma reduction method. The NiRu@MWCNTs exhibits remarkable electrocatalytic activity and stability for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The required overpotentials to drive a current density of 10 mA cm^-2 (η₁₀) over NiRu@MWCNTs are only 14 and 240 mV, corresponding to Tafel slopes of 32 and 55 mV dec^-1 for the HER and OER in alkaline medium, respectively. Furthermore, the NiRu@MWCNTs electrolyzer shows low η₁₀ of 330, 380, and 280 mV in acidic, neutral, and alkaline media, respectively. Density functional theory (DFT) calculations and experimental results reveal that the NiRu alloy NPs attached to the defective and nondefective carbon are the key active sites for the HER and OER, respectively, thus resulting in superior isolated synergistic bifunctional active sites for overall water splitting. Our work provides a promising strategy for efficient synthesis of robust catalysts with specific bifunctional active sites for overall water splitting in a wide pH range, along with deep insight into the catalytic mechanism.

Single-atom Sn-Zn pairs in CuO catalyst promote dimethyldichlorosilane synthesis

Single-atom catalysts are of great interest because they can maximize the atom-utilization efficiency and generate unique catalytic properties; however, much attention has been paid to single-site active components, rarely to catalyst promoters. Promoters can significantly affect the activity and selectivity of a catalyst, even at their low concentrations in catalysts. In this work, we designed and synthesized CuO catalysts with atomically dispersed co-promoters of Sn and Zn. When used as the catalyst in the Rochow reaction for the synthesis of dimethyldichlorosilane, this catalyst exhibited much-enhanced activity, selectivity and stability compared with the conventional CuO catalysts with promoters in the form of nanoparticles. Density functional theory calculations demonstrate that single-atomic Sn substitution in the CuO surface can enrich surface Cu vacancies and promote dispersion of Zn to its atomic levels. Sn and Zn single sites as the co-promoters cooperatively generate electronic interaction with the CuO support, which further facilitates the adsorption of the reactant molecules on the surface, thereby leading to the superior catalytic performance.

ZnO-Templated Selenized and Phosphorized Cobalt-Nickel Oxide Microcubes as Rapid Alkaline Water Oxidation Electrocatalysts

Oxygen electrocatalysis is of remarkable significance for electrochemical energy storage and conversion technologies, together with fuel cells, metal-air batteries, and water splitting devices. Substituting noble metal-based electrocatalysts by decidedly effective and low-cost metal-based oxygen electrocatalysts is imperative for the commercial application of these technologies. Herein, a novel strategy is presented to fabricate selenized and phosphorized porous cobalt-nickel oxide microcubes by using a sacrificial ZnO spherical template and the resulting microcubes are employed as an oxygen evolution reaction (OER) electrocatalyst. The selenized samples manifest desirable and robust OER performance, with comparable overpotential at 10 mA cm^-2 (312 mV) as RuO₂ (308 mV) and better activity when the current reaches 13.7 mA cm^-2 . The phosphorized samples exhibit core-shell structure with low-crystalline oxides inside amorphous phosphides, which ensures superior activity than RuO₂ with the same overpotential (at 10 mA cm^-2 ) yet lower Tafel slope. Such a surface doping method possibly will provide inspiration for engineering electrocatalysts applied in water oxidation.

pH universal Ru@N-doped carbon catalyst for efficient and fast hydrogen evolution

An efficient and robust hydrogen evolution electrocatalyst of Ru nanoparticles embedded in N-doped carbon was obtained by using Bu₄N[Ru(N)Cl₄] and Na₄EDTA as precursors. It exhibits excellent catalytic activity in alkaline solutions and good performance in acidic media.

In[Ba3Cl3F6]: a novel infrared-transparent molecular sieve constructed by halides

A new metal halide molecular sieve In[Ba₃Cl₃F₆] has been synthesized by the hydrothermal method. It possesses a wide transparent window from 0.366 to 22 μm and can exhibit the good adsorption–desorption property.

Differences in the selective reduction mechanism of 4-nitroacetophenone catalysed by rutile- and anatase-supported ruthenium catalysts

Ru nanoparticles supported on different crystalline TiO₂(anatase and rutile) phases result in different reaction pathways for 4-nitroacetophenone.

Hierarchical Branched Mesoporous TiO2-SnO2 Nanocomposites with Well-Defined n-n Heterojunctions for Highly Efficient Ethanol Sensing

The direct assembly of functional nanoparticles into a highly crystalline mesoporous semiconductor with oriented configurations is challenging but of significance. Herein, an evaporation induced oriented co-assembly strategy is reported to incorporate SnO2 nanocrystals (NCs) into a 3D branched mesoporous TiO2 framework by using poly(ethylene oxide)-block-polystyrene (PEO-b-PS) as the template, SnO2 NCs as the direct tin source, and titanium butoxide (TBOT) as the titania precursor. Owing to the combined properties of ultrasmall particle size (3-5 nm), excellent dispersibility and presence of abundant hydroxyl groups, SnO2 NCs can easily interact with PEO block of the template through hydrogen bonding and co-assemble with hydrolyzed TBOT to form a novel hierarchical branched mesoporous structure (SHMT). After calcination, the obtained composites exhibit a unique 3D flower-like structure, which consists of numerous mesoporous rutile TiO2 branches with uniform cylindrical mesopores (≈9 nm). More importantly, the SnO2 NCs are homogeneously distributed in the mesoporous TiO2 matrix, forming numerous n-n heterojunctions. Due to the unique textual structures, the SHMT-based gas sensors show excellent gas sensing performance with fast response/recovery dynamics, high sensitivity, and selectivity toward ethanol.

Hollow Nanotube Ru/Cu2+1 O Supported on Copper Foam as a Bifunctional Catalyst for Overall Water Splitting

Hydrogen energy is considered as one of the ideal clean energies for solving the energy shortage and environmental issues, and developing highly efficient electrocatalysts for overall water splitting to produce hydrogen is still a huge challenge. Herein, for the first time, Ru-doped Cu₂₊₁ O vertically arranged nanotube arrays in situ grown on Cu foam (Ru/Cu₂₊₁ O NT/CuF) are reported and further investigated for their catalytic properties for overall water splitting. The Ru/Cu₂₊₁ O NT/CuF presents ultrahigh catalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline conditions, and it exhibits a small overpotential of 32 mV at 10 mA cm^-2 in the HER, and only needs 210 mV overpotential to achieve a current density of 10 mA cm^-2 in the OER. Importantly, the alkaline electrolyzer using Ru/Cu₂₊₁ O NT/CuF as a bifunctional electrocatalyst only needs 1.53 V voltage to deliver a current density of 10 mA cm^-2 , which is much lower than the benchmark of IrO₂ (+)/Pt(-) counterpart (1.64 V at 10 mA cm^-2 ). The excellent performance of the Ru/Cu₂₊₁ O NT/CuF catalyst is attributed to its high conductive substrate and special Ru-doped nanotube structure, which provides a high electrochemical active surface area and 3D gas diffusion channel.

Nonsiliceous Mesoporous Materials: Design and Applications in Energy Conversion and Storage

In this work, the progress in the design of nonsiliceous mesoporous materials (nonSiMPMs) over the last five years from the perspectives of the chemical composition, morphology, loading, and surface modification is summarized. Carbon, metal, and metal oxide are in focus, which are the most promising compositions. Then, representative applications of nonSiMPMs are demonstrated in energy conversion and storage, including recent technical advances in dye-sensitized solar cells, perovskite solar cells, photocatalysts, electrocatalysts, fuel cells, storage batteries, supercapacitors, and hydrogen storage systems. Finally, the requirements and challenges of the design and application of nonSiMPMs are outlined.

Low-Cost Porous Ruthenium Layer Deposited on Nickel Foam as a Highly Active Universal-pH Electrocatalyst for the Hydrogen Evolution Reaction

Low-cost and high-efficiency electrocatalysts for the hydrogen evolution reaction (HER) are a key constituent of a low-carbon industrial economy based on intermittent energy production in the near future. A facile wet-chemistry strategy has been developed for the synthesis of a porous Ru layer deposited onto Ni foam (NF) as a competitive candidate for HER over the whole pH range, especially under economical alkaline conditions. The catalyst shows outstanding HER performance, which stems from the porosity of the Ru layer, the electronic structure of the electrode, and the charge transfer between the NF and the Ru layer, which gives rise to the strong activity of the Ru layer in the HER process. Moreover, the Ru loading was as low as approximately 1.1 wt %, representing significant potential for application in cost-effective HER.

High-Performance Ru@C4N Electrocatalyst for Hydrogen Evolution Reaction in Both Acidic and Alkaline Solutions

We report a high-performance Ru@C₄N electrocatalyst for the hydrogen evolution reaction (HER) in both acidic and alkaline solutions. This catalyst is synthesized by annealing a complex of a covalent organic framework compound coordinated with ruthenium synthesized by a "one-pot" solvothermal method. This Ru@C₄N catalyst shows excellent electrocatalytic activity toward the hydrogen evolution reaction (HER) in both acidic and alkaline solutions with very low overpotentials at 10 mA/cm² (6 mV in 0.5 M H₂SO₄ solution; 7 mV in 1.0 M KOH solution), which outperforms the commercial catalyst Pt/C. The Ru@C₄N electrocatalyst also exhibits high HER turnover frequencies of 0.93 H₂ per s in 0.5 M H₂SO₄ and 0.65 H₂ per s in 1.0 M KOH solutions at 25 mV as well as superior performance stability.

Point-Defect-Rich Carbon Sheets as the High-Activity Catalyst Toward Oxygen Reduction and Hydrogen Evolution

Exploring a novel approach for the synthesis of oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) catalysts with inexpensive and high-activity is desirable. Herein, we report a bubble templating method to synthesize the graphene-like mesoporous carbon sheets with point defects as ORR/HER bifunctional electrocatalysts. The typical product shows excellent ORR performance including the positive onset potential (740 mV) and high diffusion-limiting current density (4.07 mA cm−2). Along with small Tafel slopes, the overpotential is determined to be about −453 and −378 mV at 10 mA cm−2 in both alkaline and acidic media, which suggests a good candidate for HER reaction as well. The superior catalytic activities are derived from the abundant point defects on the mesoporous carbon sheets surface, especially the existence of pyridinic and pyrrolic nitrogen species. This study may be an alternative route to prepare the novel functional materials for the applications of ORR and HER.

One Step Interface Activation of ZnS Using Cupric Ions for Mercury Recovery from Nonferrous Smelting Flue Gas

The flue gases with high concentration of mercury are often encountered in the nonferrous smelting industries and the treatment of mercury-containing wastes. To recover mercury from such flue gases, sorbents with enough large adsorption capacity are required to capture and enrich mercury. ZnS is a cheap and readily prepared material, and even can be obtained from its natural ores. In this work, a simple controllable oxidation method-soaking in cupric solution-was developed to improve the interfacial activity of ZnS and its natural ores for Hg⁰ adsorption. The gaseous Hg⁰ adsorption capacity of ZnS was enhanced from 0.3 to 3.6 mg·g^-1 after such treatment. Further analysis indicated that a new interface rich in S^1- ions was formed and provided sufficient active sites for the chemical adsorption of Hg⁰. In addition, the cyclic Hg⁰ adsorption and recovery experiments demonstrated that the adsorption performance of spent activated-ZnS was recovered after reactivating sorbents with Cu²⁺, indicating the recovery of activated interface. Meanwhile, the high concentration of adsorbed mercury at the surface can be collected using a thermal treatment method. Utilization of raw materials from a zinc production process provides a promising and cost-effective method for removing and recovering mercury from nonferrous smelting flue gas.

Ball Milling-Assisted Synthesis of Ultrasmall Ruthenium Phosphide for Efficient Hydrogen Evolution Reaction

The development of scalable hydrogen production technology to produce hydrogen economically and in an environmentally friendly way is particularly important. The hydrogen evolution reaction (HER) is a clean, renewable, and potentially cost-effective pathway to produce hydrogen, but it requires the use of a favorable electrocatalyst which can generate hydrogen with minimal overpotential for practical applications. Up to now, ruthenium phosphide Ru2P has been considered as a high-performance electrocatalyst for the HER. However, a tedious post-treatment method as well as large consumption of solvents in conventional solution-based synthesis still limits the scalable production of Ru2P electrocatalysts in practical applications. In this study, we report a facile and cost-effective strategy to controllably synthesize uniform ultrasmall Ru2P nanoparticles embedded in carbon for highly efficient HER. The key to our success lies in the use of a solid-state ball milling-assisted technique, which overcomes the drawbacks of the complicated post-treatment procedure and large solvent consumption compared with solution-based synthesis. The obtained electrocatalyst exhibits excellent Pt-like HER performance with a small overpotential of 36 mV at current density of 10 mA cm−2 in 1 M KOH, providing new opportunities for the fabrication of highly efficient HER electrocatalysts in real-world applications.