Functional cationic nanomagnet-porphyrin hybrids for the photoinactivation of microorganisms

A Perspective on the Trends and Challenges Facing Porphyrin-Based Anti-Microbial Materials

The emergence of multidrug resistant bacterium threatens to unravel global healthcare systems, built up over centuries of medical research and development. Current antibiotics have little resistance against this onslaught as bacterium strains can quickly evolve effective defense mechanisms. Fortunately, alternative therapies exist and, at the forefront of research lays the photodynamic inhibition approach mediated by porphyrin based photosensitizers. This review will focus on the development of various porphyrins compounds and their incorporation as small molecules, into polymers, fibers and thin films as practical therapeutic agents, utilizing photodynamic therapy to inhibit a wide spectrum of bacterium. The use of photodynamic therapy of these porphyrin molecules are discussed and evaluated according to their electronic and bulk material effect on different bacterium strains. This review also provides an insight into the general direction and challenges facing porphyrins and derivatives as full-fledged therapeutic agents and what needs to be further done in order to be bestowed their rightful and equal status in modern medicine, similar to the very first antibiotic; penicillin itself. It is hoped that, with this perspective, new paradigms and strategies in the application of porphyrins and derivatives will progressively flourish and lead to advances against disease.

Protein profiles of Escherichia coli and Staphylococcus warneri are altered by photosensitization with cationic porphyrins

Oxidative stress induced by photodynamic treatment of microbial cells causes irreversible damages to vital cellular components such as proteins. Photodynamic inactivation (PDI) of bacteria, a promising therapeutic approach for the treatment of superficial and localized skin and oral infections, can be achieved by exciting a photosensitizing agent with visible light in an oxygenated environment. Although some studies have addressed the oxidative alterations of PDI in bacterial proteins, the present study is the first to compare the electrophoretic profiles of proteins of Gram-positive and Gram-negative bacteria, having two structurally different porphyrins, with different kinetics of photoinactivation. The cationic porphyrins 5,10,15-tris(1-methylpyridinium-4-yl)-20-(pentafluorophenyl)porphyrin tri-iodide (Tri-Py(+)-Me-PF) and 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin tetra-iodide (Tetra-Py(+)-Me) were used to photosensitize Escherichia coli and Staphylococcus warneri upon white light irradiation at an irradiance of 4.0 mW cm(-2). After different photosensitization periods, proteins were extracted from bacteria and analyzed using one-dimensional SDS-PAGE. Apparent molecular weights and band intensities were determined after an irradiation period corresponding to a reduction of 4 log10 in cell viability. After photodynamic treatment, there was a general loss of bacterial proteins, assigned to large-scale protein degradation. Protein loss was more pronounced after PDI with Tri-Py(+)-Me-PF in both bacteria. There was also an increase in the concentration of some proteins as well as an increase in the molecular weight of other proteins. We show that proteins of E. coli and S. warneri are important targets of PDI. Although there is an attempt of cellular response to the PDI-induced damage by overexpression of a limited number of proteins, the damage is lethal. Our results show that changes occurring in the protein pattern during photodynamic treatment are different with the two photosensitizers, which helps to explain the different inactivation kinetics of the two bacteria. SDS-PAGE is a rational approach to assign the type of cellular response to stress that is being induced in the cells.

Effect of Photodynamic Therapy on the Virulence Factors of Staphylococcus aureus

Staphylococcus aureus is a Gram-positive bacterium that is present in the human microbiota. Nevertheless, these bacteria can be pathogenic to the humans. Due to the increasing occurrence of antibiotic-resistant S. aureus strains, new approaches to control this pathogen are necessary. The antimicrobial photodynamic inactivation (PDI) process is based in the combined use of light, oxygen, and an intermediary agent (a photosensitizer). These three components interact to generate cytotoxic reactive oxygen species that irreversibly damage vital constituents of the microbial cells and ultimately lead to cell death. Although PDI is being shown to be a promising alternative to the antibiotic approach for the inactivation of pathogenic microorganisms, information on effects of photosensitization on particular virulence factors is strikingly scarce. The objective of this work was to evaluate the effect of PDI on virulence factors of S. aureus and to assess the potential development of resistance of this bacterium as well as the recovery of the expression of the virulence factors after successive PDI cycles. For this, the photosensitizer 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin tetra-iodide (Tetra-Py⁺-Me) and six strains of S. aureus [one reference strain, one strain with one enterotoxin, two strains with three enterotoxins and two methicillin resistant strains (MRSA) – one with five enterotoxins and the other without enterotoxins] were used. The effect of photosensitization on catalase activity, beta hemolysis, lipases, thermonuclease, enterotoxins, coagulase production, and resistance/susceptibility to methicillin was tested. To assess the development of resistance after successive cycles of treatment, three strains of S. aureus (ATCC 6538, 2065 MA, and SA 3 MRSA) were used. The surviving colonies of a first cycle of PDI were collected from the solid medium and subjected to further nine consecutive cycles of PDI. The results indicate that the expression of some external virulence factors is affected by PDI and enterotoxin producing strains were more susceptible to PDI than non-toxigenic strains. The surviving bacteria did not develop resistance. PDI, contrarily to traditional antibiotics, inhibited the expression of virulence factors, efficiently inactivating either highly virulent strains and low virulent S. aureus strains, inactivating also antibiotic susceptible and resistant strains, without development of photoresistance after at least 10 consecutive cycles of treatment, and so this therapy may become a strong promising alternative to antibiotics to control pathogenic microorganisms.

Cost-efficient method for unsymmetrical meso-aryl porphyrins and iron oxide-porphyrin hybrids prepared thereof

Synthesis, characterisation and photophysical properties of magnetic iron oxide-porphyrin hybrids starting from unsymmetrical porphyrins, which are prepared by a cost-efficient methodology.

Physicochemical and antimicrobial photodynamic chemotherapy of unsymmetrical indium phthalocyanines alone or in the presence of magnetic nanoparticles

An aminophenoxy substituent indium phthalocyanine was linked to magnetic nanoparticles and the conjugate showed less activity than the Pc alone towards photodynamic antimicrobial chemotherapy ofE. coli.

Isoxazolidine-fused meso-tetraarylchlorins as key tools for the synthesis of mono- and bis-annulated chlorins

An efficient synthetic approach to prepare novel annulated chlorin derivatives, a meso-tetraarylchlorin bearing an azepine ring and another bearing simultaneously an azepine and a 2H-pyran ring, is described.

Influence of external bacterial structures on the efficiency of photodynamic inactivation by a cationic porphyrin

The main targets of photodynamic inactivation (PDI) are the external bacterial structures, cytoplasmic membrane and cell wall. In this work it was evaluated how the external bacterial structures influence the PDI efficiency. To reach this objective 8 bacteria with distinct external structures were selected; 4 Gram-negative bacteria (Escherichia coli, with typical Gram-negative external structures; Aeromonas salmonicida, Aeromonas hydrophila both with an S-layer and Rhodopirellula sp., with a peptidoglycan-less proteinaceous cell wall and with cytoplasm compartmentalization) and 4 Gram-positive bacteria (Staphylococcus aureus, with typical Gram-positive external structures; Truepera radiovictrix, Deinococcus geothermalis and Deinococcus radiodurans, all with thick cell walls that give them Gram-positive stains, but including a second complex multi-layered membrane and structurally analogous to that of Gram-negative bacteria). The studies were performed in the presence of 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin tetraiodide (Tetra-Py(+)-Me) at 5.0 μM with white light (40 W m(-2)). The susceptibility of each bacteria to PDI by Tetra-Py(+)-Me was dependent on bacteria external structures. Although all Gram-positive bacteria were inactivated to the detection limit (reduction of ∼8 log) after 60-180 min of irradiation, the inactivation followed distinct patterns. Among the Gram-negative bacteria, E. coli was the only species to be inactivated to the detection limit (∼8 log after 180 min). The efficiency of inactivation of the two species of Aeromonas was similar (reduction of ∼5-6 log after 270 min). Rhodopirellula was less susceptible (reduction of ∼4 log after 270 min). As previously observed, the Gram-positive bacteria are more easily inactivated than Gram-negative strains, and this is even true for T. radiovictrix, D. geothermalis and D. radiodurans, which have a complex multi-layered cell wall. The results support the theory that the outer cell structures are major bacterial targets for PDI. Moreover, the chemical composition of the external structures has a stronger effect on PDI efficiency than complexity and the number of layers of the external coating, and lipids seem to be an important target of PDI.

Evaluation of the interplay among the charge of porphyrinic photosensitizers, lipid oxidation and photoinactivation efficiency in Escherichia coli

Photodynamic inactivation (PDI) is a simple and controllable method to destroy microorganisms based on the production of reactive oxygen species (ROS) (e.g., free radicals and singlet oxygen), which irreversibly oxidize microorganism's vital constituents resulting in lethal damage. This process requires the combined action of oxygen, light and a photosensitizer (PS), which absorbs and uses the energy from light to produce ROS. For a better understanding of the photoinactivation process, the knowledge on how some molecular targets are affected by PDI assumes great importance. The aim of this work was to study the relation between the number and position of positive charges on porphyrinic macrocycles and the changes observed on bacterial lipids. For that, five porphyrin derivatives, bearing one to four positive charges, already evaluated as PS on Escherichia coli inactivation, have been tested on lipid extracts from this bacterium, and also on a simple liposome model. The effects were evaluated by the quantification of lipid hydroperoxides and by analysis of the variation of fatty acyl profiles. E. coli suspensions and liposomes were irradiated with white light in the presence of each PS (5.0 μM). Afterwards, total E. coli lipids were extracted and quantified by phosphorus assay. Lipid oxidation on bacteria and on liposomes was quantified by ferrous oxidation in xylenol orange (FOX2 assay) and the analysis of the fatty acid profile was done by gas chromatography (GC). As previously observed for E. coli viability, an overall increase in the lipid hydroperoxides content, depending on the PS charge and on its distribution on the macrocycle, was observed. Analysis of the fatty acid profile has shown a decrease of the unsaturated fatty acids, corroborating the relation between lipid oxidation and PDI efficiency. Bacterial membrane phospholipids are important molecular targets of photoinactivation and the number of charges of the PS molecule, as well as their distribution, have a clear effect on the lipid oxidation and on the efficiency of PDI. The distinct extent of the formation of lipid hydroperoxy derivatives, depending on the PS used, is a good indicator of this process. The FOX2 assay allowed the detection of lipid peroxidation of E. coli membrane after PDI with all the five porphyrins, however, it was not the most appropriated method to quantify the relative lipid oxidation caused by PS with different efficiencies. The fatty acid analysis used to quantify the extent of lipid oxidation by the different PS provided better results. The same results were observed for the liposome model. Consequently, the model system based on liposomes is a fast and simple method that can be used for the screening of the efficiency of new PS, before proceeding with the more complex studies on bacterial models.

Photodynamic inactivation of bacterial and yeast biofilms with a cationic porphyrin

The efficiency of 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin tetra-iodide (Tetra-Py(+)-Me) in the photodynamic inactivation of single-species biofilms of Staphylococcus aureus, Pseudomonas aeruginosa and Candida albicans and mixed biofilms of S. aureus and C. albicans was evaluated. The effect on the extracellular matrix of P. aeruginosa was also assessed. Irradiation with white light up to an energy dose of 64.8 J cm(-2) in the presence of 20 μm of Tetra-Py(+)-Me caused significant inactivation in all single-species biofilms (3-6 log reductions), although the susceptibility was attenuated in relation to planktonic cells. In mixed biofilms, the inactivation of S. aureus was as efficient as in single-species biofilms but the susceptibility of C. albicans decreased. In P. aeruginosa biofilms, a reduction of 81% in the polysaccharide content of the matrix was observed after treatment with a 20 μm PS concentration and a total light dose of 64.8 J cm(-2). The results show that the Tetra-Py(+)-Me causes significant inactivation of the microorganisms, either in biofilms or in the planktonic form, and demonstrate that polysaccharides of the biofilm matrix may be a primary target of photodynamic damage.

Oligolysine-conjugated zinc(II) phthalocyanines as efficient photosensitizers for antimicrobial photodynamic therapy

A series of zinc(II) phthalocyanines conjugated with an oligolysine chain (n=2, 4, and 8) were synthesized and characterized by using various spectroscopic methods. As shown by using UV/Vis and fluorescence spectroscopic methods, these compounds were nonaggregated in N,N-dimethylformamide, and gave a weak fluorescence emission and high singlet oxygen quantum yield (Φ(Δ) =0.86-0.89) as a result of their di-α-substitution. They became slightly aggregated in water with 0.05 % Cremophor EL, but they could still generate singlet oxygen effectively. The antimicrobial photodynamic activities of these compounds were then examined against various bacterial strains, including the Gram-positive methicillin-sensitive Staphylococcus aureus ATCC 25923 and methicillin-resistant Staphylococcus aureus ATCC BAA-43, and the Gram-negative Escherichia coli ATCC 35218 and Pseudomonas aeruginosa ATCC 27853. Generally, the dyes were much more potent toward the Gram-positive bacteria. Only 15 to 90 nM of these photosensitizers was required to induce a 4 log reduction in the cell viability of the strains. For Escherichia coli, the photocytotoxicity increased with the length of the oligolysine chain. The octalysine derivative showed the highest potency with a 4 log reduction concentration of 0.8 μM. Pseudomonas aeruginosa was most resistant to the photodynamic treatment. The potency of the tetralysine derivative toward a series of clinical strains of Staphylococcus aureus was also examined and found to be comparable with that toward the nonclinical counterparts. Moreover, the efficacy of these compounds in photodynamic inactivation of viruses was also examined. They were highly photocytotoxic against the enveloped viruses influenza A virus (H1N1) and herpes simplex virus type 1 (HSV1), but exhibited no significant cytotoxicity against the nonenveloped viruses adenovirus type 3 (Ad3) or coxsackievirus (Cox B1). The octalysine derivative also showed the highest potency with an IC(50) value of 0.05 nM for the two enveloped viruses.

Photobiological characteristics of chlorophyll a derivatives as microbial PDT agents

Chlorin-e6 (chl-e6) and a hydrogenated derivative (chl-e6H) were semi-synthesized, and their photophysical properties and photodynamic activity againstEscherichia coli,Staphylococcus aureusandCandida albicansevaluated.

Photodynamic oxidation of Escherichia coli membrane phospholipids: new insights based on lipidomics

RATIONALE

The irreversible oxidation of biological molecules, such as lipids, can be achieved with a photosensitizing agent and subsequent exposure to light, in the presence of molecular oxygen. Although lipid peroxidation is an important toxicity mechanism in bacteria, the alterations caused by the photodynamic therapy on bacterial phospholipids are still unknown. In this work, we studied the photodynamic oxidation of Escherichia coli membrane phospholipids using a lipidomic approach.

METHODS

E. coli ATCC 25922 were irradiated for 90 min with white light (4 mW cm(-2), 21.6 J cm(-2)) in the presence of a tricationic porphyrin [(5,10,15-tris(1-methylpyridinium-4-yl)-20-(pentafluorophenyl)porphyrin triiodide, Tri-Py(+)-Me-PF]. Lipids were extracted and separated by thin-layer chromatography. Phospholipid classes were quantified by phosphorus assay and analyzed by electrospray ionization tandem mass spectrometry. Fatty acids were analyzed by gas chromatography. Quantification of lipid hydroperoxides was performed by FOX2 assay. Analysis of the photodynamic oxidation of a phospholipid standard was also performed.

RESULTS

Our approach allowed us to see that the photodynamic treatment induced the formation of a high amount of lipid hydroperoxides in the E. coli lipid extract. Quantification of fatty acids revealed a decrease in the unsaturated C16:1 and C18:1 species suggesting that oxidative modifications were responsible for their variation. It was also observed that photosensitization induced the oxidation of phosphatidylethanolamines with C16:1, C18:1 and C18:2 fatty acyl chains, with formation of hydroxy and hydroperoxy derivatives.

CONCLUSIONS

Membrane phospholipids of E. coli are molecular targets of the photodynamic effect induced by Tri-Py(+) -Me-PF. The overall change in the relative amount of unsaturated fatty acids and the formation of PE hydroxides and hydroperoxides evidence the damages in bacterial phospholipids caused by this lethal treatment.

Involvement of type I and type II mechanisms on the photoinactivation of non-enveloped DNA and RNA bacteriophages

Microbial photodynamic inactivation (PDI), involving the use of a photosensitizer (PS), light and molecular oxygen, with the subsequent production of reactive oxygen species (ROS), has been considered a promising and effective technology for viral inactivation. Although singlet oxygen is generally accepted as the main damaging species in PDI, ROS like free radicals may also be involved in the process, inducing damages to proteins, lipids, nucleic acids and other molecular structures. In this study, the relative importance of each mechanism (type I and type II) on the photoinactivation of non-enveloped DNA (T4-like phage) and RNA (Qβ phage) viruses was evaluated. For this purpose, two cationic porphyrins (Tri-Py(+)-Me-PF and Tetra-Py(+)-Me) and four different ROS scavengers were used. The scavenging effect of sodium azide and L-histidine (singlet oxygen quenchers) and of D-mannitol and L-cysteine (free radical scavengers) was assessed by exposure of both phages (T4-like and Qβ) to each cationic porphyrin (5.0μM for T4-like phage and 0.5μM for Qβ phage) and white light (40Wm(-2)) in the presence of different concentrations of the scavengers (5, 10, 50 and 100mM). Sodium azide and L-histidine gave the best protection, reducing the phototoxic effect of Tri-Py(+)-Me-PF on T4-like phage respectively by 80% and 72% and in the presence of Tetra-Py(+)-Me by 90% and 78%. Free radical scavengers D-mannitol and L-cysteine did not significantly reduce the rate of T4-like phage photoinactivation (around 20% protection, for both PS). The sodium azide protection on Qβ phage photoinactivation, in the presence of Tri-Py(+)-Me-PF, was lower (39%) when compared with T4-like phage. D-mannitol did not exert on Qβ phage any protective effect after 90min of irradiation. The effect of the simultaneous presence of singlet oxygen and free radicals scavengers at 100mM confirmed that singlet oxygen (type II mechanism) is clearly the main ROS involved in T4-like and Qβ phages photoinactivation by these two cationic PS. As RNA-type phages are more easily photoinactivated when compared with DNA-type ones, the protection conferred by the scavengers during the PDI process is lower and this should be taken into account when the main mechanism involved in PDI of different viruses is to be studied.

Silica nanoparticles functionalized with porphyrins and analogs for biomedical studies

This review focus on the preparation of silica nanoparticles functionalized with porphyrins and related compounds. It is aimed to highlight their features as photosensitizers in the area of photodynamic therapy. In this field, photosensitizers have been covalently and non-covalently linked to silica nanoparticles, in order to study their photophysical and biological properties. Another fascinating scenario for photosensitizer-silica nanoparticles hybrids involves the possibility of including metal cores for conditioning the uptake in the target cells, allowing most of the times the combination of therapies and in certain conditions to facilitate the removal and reutilization of the photosensitizer in environmental applications.

Vilsmeier-Haack formylation of Cu(II) and Ni(II) porphyrin complexes under microwaves irradiation

Microwave irradiation is a powerful tool in organic synthesis allowing for instance, to reduce reaction times and to obtain the desired products in better yields. Contrary to what is reported in literature, the first Vilsmeier-Haack formylation of Ni(II) and Cu(II) complexes of meso-tetraarylporphyrins by using microwave irradiation is described here. Different solvents, irradiation powers and reaction times were studied using the Ni(II) and Cu(II) complexes of 5,10,15,20-tetraphenylporphyrin and the best found conditions were extended to a series of other meso-substituted tetraarylporphyrins. The products, namely the new ones were isolated in good to excellent yields and with a significant reduction on the reaction times. Scaled-up studies have shown that the efficiency of the process is not affected by increasing the amount of porphyrin.

Photobactericidal porphyrin-cellulose nanocrystals: synthesis, characterization, and antimicrobial properties

Adherence and survival of pathogenic bacteria on surfaces leading to concomitant transmission to new hosts significantly contributes to the proliferation of pathogens, which in turn considerably increases the threat to human health, particularly by antibiotic-resistant bacteria. Consequently, more research into effective surface disinfection and alternative materials (fabrics, plastics, or coatings) with antimicrobial and other bioactive characteristics is desirable. This report describes the synthesis and characterization of cellulose nanocrystals that were surface-modified with a cationic porphyrin. The porphyrin was appended onto the cellulose surface via the Cu(I)-catalyzed Huisgen-Meldal-Sharpless 1,3-dipolar cycloaddition having occurred between azide groups on the cellulosic surface and porphyrinic alkynes. The resulting, generally insoluble, crystalline material, CNC-Por (5), was characterized by infrared and diffusion (1)H NMR spectroscopies, gel permeation chromatography, and thermogravimetric analysis. Although only suspended, and not dissolved, in an aqueous system, CNC-Por (5) showed excellent efficacy toward the photodynamic inactivation of Mycobacterium smegmatis and Staphylococcus aureus , albeit only slight activity against Escherichia coli . The synthesis, properties, and activity of CNC-Por (5) described herein serve as a benchmark toward our overall objectives of developing novel, potent, bioactive, photobactericidal materials that are effective against a range of bacteria, with potential utilization in the health care and food preparation industries.

Evaluation of resistance development and viability recovery by a non-enveloped virus after repeated cycles of aPDT

Nowadays, the emergence of drug resistant microorganisms is a public health concern. The antimicrobial photodynamic therapy (aPDT) has an efficient action against a wide range of microorganisms and can be viewed as an alternative approach for treating microbial infections. The aim of this study was to determine if a model target virus (T4-like bacteriophage), in the presence of the tricationic porphyrin 5,10,15-tris(1-methylpyridinium-4-yl)-20-(pentafluorophenyl)porphyrin tri-iodide (Tri-Py(+)-Me-PF), can develop resistance to aPDT and recover its viability after photodynamic treatments. To assess the development of aPDT resistance after repeated treatments, a suspension of T4-like bacteriophage was irradiated with white light (40 Wm(-2)) for 120 min in the presence of 5.0 μM of Tri-Py(+)-Me-PF (99.99% of inactivation) and new phage suspensions were produced from the surviving phages, after each cycle of light exposure. The procedure was repeated ten times. To evaluate the recovery of viral viability after photoinactivation, a suspension of T4-like bacteriophage was irradiated with white light for 120 min in the presence of 5.0 μM of Tri-Py(+)-Me-PF on five consecutive days. In each day, an aliquot of the irradiated suspension was plated and the number of lysis plaques was counted after 24, 48, 72, 96 and 120 h of dark incubation at 37 °C. The profile of bacteriophage photoinactivation did not change after ten consecutive cycles and no recovery of viability was detected after five accumulated cycles of photodynamic treatment. The results suggest that aPDT represents a valuable and promising alternative therapy to treat viral infections, overcoming the problem of microbial resistance.

Photodynamic antimicrobial chemotherapy in aquaculture: photoinactivation studies of Vibrio fischeri

Background

Photodynamic antimicrobial chemotherapy (PACT) combines light, a light-absorbing molecule that initiates a photochemical or photophysical reaction, and oxygen. The combined action of these three components originates reactive oxygen species that lead to microorganisms' destruction. The aim was to evaluate the efficiency of PACT on Vibrio fischeri: 1) with buffer solution, varying temperature, pH, salinity and oxygen concentration values; 2) with aquaculture water, to reproduce photoinactivation (PI) conditions in situ.

Methodology/Principal Findings

To monitor the PI kinetics, the bioluminescence of V. fischeri was measured during the experiments. A tricationic meso-substituted porphyrin (Tri-Py⁺-Me-PF) was used as photosensitizer (5 µM in the studies with buffer solution and 10–50 µM in the studies with aquaculture water); artificial white light (4 mW cm⁻²) and solar irradiation (40 mW cm⁻²) were used as light sources; and the bacterial concentration used for all experiments was ≈10⁷ CFU mL⁻¹ (corresponding to a bioluminescence level of 10⁵ relative light units - RLU). The variations in pH (6.5–8.5), temperature (10–25°C), salinity (20–40 g L⁻¹) and oxygen concentration did not significantly affect the PI of V. fischeri, once in all tested conditions the bioluminescent signal decreased to the detection limit of the method (≈7 log reduction). The assays using aquaculture water showed that the efficiency of the process is affected by the suspended matter. Total PI of V. fischeri in aquaculture water was achieved under solar light in the presence of 20 µM of Tri-Py⁺-Me-PF.

Conclusions/Significance

If PACT is to be used in environmental applications, the matrix containing target microbial communities should be previously characterized in order to establish an efficient protocol having into account the photosensitizer concentration, the light source and the total light dose delivered. The possibility of using solar light in PACT to treat aquaculture water makes this technology cost-effective and attractive.