Uniform fluorescent nanobioprobes for pathogen detection

Ultrasensitive Virion Immunoassay Platform with Dual-Modality Based on a Multifunctional Aggregation-Induced Emission Luminogen

Sensitive and accurate detection of highly contagious virus is urgently demanded for disease diagnosis and treatment. Herein, based on a multifunctional aggregation-induced emission luminogen (AIEgen), a dual-modality readout immunoassay platform for ultrasensitive detection of viruses has been successfully demonstrated. The platform is relied on virions immuno-bridged enzymatic hydrolysis of AIEgen, accompanying with the in situ formation of highly emissive AIE aggregates and shelling of silver on gold nanoparticles. As a result, robust turn-on fluorescence and naked-eye discernible plasmonic colorimetry composed dual-signal is achieved. By further taking advantage of effective immunomagnetic enrichment, EV71 virions, as an example, can be specifically detected with a limit of detection down to 1.4 copies/μL under fluorescence modality. Additionally, semiquantitative discerning of EV71 virions is realized in a broad range from 1.3 × 10³ to 2.5 × 10⁶ copies/μL with the naked eye. Most importantly, EV71 virions in 24 real clinical samples are successfully diagnosed with 100% accuracy. Comparing to the gold standard polymerase chain reaction (PCR) assay, our immunoassay platform do not need complicated sample pretreatment and expensive instruments. This dual-modality strategy builds a good capability for both colorimetry based convenient preliminary screening and fluorescence based accurate diagnosis of suspect infections in virus-stricken areas.

Multiplexed Instrument-Free Bar-Chart SpinChip Integrated with Nanoparticle-Mediated Magnetic Aptasensors for Visual Quantitative Detection of Multiple Pathogens

A portable multiplexed bar-chart SpinChip (MB-SpinChip) integrated with nanoparticle-mediated magnetic aptasensors was developed for visual quantitative instrument-free detection of multiple pathogens. This versatile multiplexed SpinChip combines aptamer-specific recognition and nanoparticle-catalyzed pressure amplification to achieve a sample-to-answer output for sensitive point-of-care testing (POCT). This is the first report of pathogen detection using a volumetric bar-chart chip, and it is also the first bar-chart chip using a "spinning" mechanism to achieve multiplexed bar-chart detection. Additionally, the introduction of the spin unit not only enabled convenient sample introduction from one inlet to multiple separate channels in the multiplexed detection, but also elegantly solved the pressure cross-interference problem in the multiplexed volumetric bar-chart chip. This user-friendly MB-SpinChip allows visual quantitative detection of multiple pathogens simultaneously with high sensitivity but without utilizing any specialized instruments. Using this MB-SpinChip, three major foodborne pathogens including Salmonella enterica, Escherichia coli, and Listeria monocytogenes were specifically quantified in apple juice with limits of detection of about 10 CFU/mL. This MB-SpinChip with a bar-chart-based visual quantitative readout has great potential for the rapid simultaneous detection of various pathogens at the point of care and wide applications in food safety, environmental surveillance, and infectious disease diagnosis.

A Comparison of Optical, Electrochemical, Magnetic, and Colorimetric Point-of-Care Biosensors for Infectious Disease Diagnosis

Each year, infectious diseases are responsible for millions of deaths, most of which occur in the rural areas of developing countries. Many of the infectious disease diagnostic tools used today require a great deal of time, a laboratory setting, and trained personnel. Due to this, the need for effective point-of-care (POC) diagnostic tools is greatly increasing with an emphasis on affordability, portability, sensitivity, specificity, timeliness, and ease of use. In this Review, we discuss the various diagnostic modalities that have been utilized toward this end and are being further developed to create POC diagnostic technologies, and we focus on potential effectiveness in resource-limited settings. The main modalities discussed herein are optical-, electrochemical-, magnetic-, and colorimetric-based modalities utilized in diagnostic technologies for infectious diseases. Each of these modalities feature pros and cons when considering application in POC settings but, overall, reveal a promising outlook for the future of this field of technological development.

Redox-Active AIEgen-Derived Plasmonic and Fluorescent Core@Shell Nanoparticles for Multimodality Bioimaging

Multimodality imaging is highly desirable for accurate diagnosis by achieving high sensitivity, spatial-temporal resolution, and penetration depth with a single structural unit. However, it is still challenging to integrate fluorescent and plasmonic modalities into a single structure, as they are naturally incompatible because of significant fluorescence quenching by plasmonic noble-metal nanoparticles. Herein, we report a new type of silver@AIEgen (aggregation-induced emission luminogen) core-shell nanoparticle (AACSN) with both strong aggregated-state fluorescence of the AIEgen and distinctive plasmonic scattering of silver nanoparticles for multimodality imaging in living cells and small animals. The AACSNs were prepared through a redox reaction between silver ions and a redox-active AIEgen, which promoted synergistic formation of the silver core and self-assembly of the AIEgen around the core. The resulting AACSNs exhibited good biocompatibility and high resistance to environmental damage. As a result, excellent performance in fluorescence imaging, dark-field microscopy, and X-ray computed tomography-based multimodality imaging was achieved.

Fluorescent Immunoassay for the Detection of Pathogenic Bacteria at the Single-Cell Level Using Carbon Dots-Encapsulated Breakable Organosilica Nanocapsule as Labels

Herein, carbon dots (CDs)-encapsulated breakable organosilica nanocapsules (BONs) were facilely prepared and used as advanced fluorescent labels for ultrasensitive detection of Staphylococcus aureus. The CDs were entrapped in organosilica shells by cohydrolyzation of tetraethyl orthosilicate and bis[3-(triethoxysilyl)propyl]disulfide to form core-shell CDs@BONs, where hundreds of CDs were encapsulated in each nanocapsule. Immunofluorescent nanocapsules, i.e., anti-S. aureus antibody-conjugated CDs@BONs, were prepared to specifically recognize S. aureus. Before fluorescent detection, CDs were released from the BONs by simple NaBH₄ reduction. The fluorescent signals were amplified by 2 orders of magnitude because of hundreds of CDs encapsulated in each nanocapsule, compared with a conventional immunoassay using CDs as fluorescent labels. A linear range was obtained at the S. aureus concentration from 1 to 200 CFU mL^-1. CDs@BONs are also expected to expand to other systems and allow the detection of ultralow concentrations of targets.

Alternative fluorophores designed for advanced molecular imaging

Fluorescent molecular imaging has advanced drastically over the past decade. With the development of high-resolution microscopy techniques and the ability to visualize intracellular molecular events, there is a growing need for new fluorophores to accompany these fast-developing techniques. Therefore, there has been substantial development of alternative fluorophores for single-molecule detection and molecular imaging. These rationally designed fluorophores have infinite possibilities and novel fluorophores are constantly being produced for different applications. This review focuses on the recent developments in novel fluorophores designed for molecular imaging and single-molecule detection. Here, single-molecule imaging, smart fluorescent probes, two-photon microscopy, Förster resonance energy transfer (FRET) and super-resolution microscopy are discussed in detail.

Directed Biofabrication of Nanoparticles through Regulating Extracellular Electron Transfer

Biofabrication of nanomaterials is currently constrained by a low production efficiency and poor controllability on product quality compared to chemical synthetic routes. In this work, we show an attractive new biosynthesis system to break these limitations. A directed production of selenium-containing nanoparticles in Shewanella oneidensis MR-1 cells, with fine-tuned composition and subcellular synthetic location, was achieved by modifying the extracellular electron transfer chain. By taking advantage of its untapped intracellular detoxification and synthetic power, we obtained high-purity, uniform-sized cadmium selenide nanoparticles in the cytoplasm, with the production rates and fluorescent intensities far exceeding the state-of-the-art biosystems. These findings may fundamentally change our perception of nanomaterial biosynthesis process and lead to the development of fine-controllable nanoparticles biosynthesis technologies.

Pt-Ni nanoframes functionalized with carbon dots: an emerging class of bio-nanoplatforms

We designed a unique and novel bio-nanoplatform based on Pt-Ni nanoframes (PNnf) functionalized with carbon dots via the EDC/NHS coupling chemistry. The PNnf with open three-dimensional surfaces exhibited excellent water solubility after polyethylenimine modification. Due to low cytotoxicity and excellent biocompatibility, the bio-nanoplatforms were firstly used for MCF-7 cell imaging in vitro. More importantly, the design strategy can be readily generalized to facilitate other multi-functional bio-nanoplatforms for biological and biomedical applications.

Fluorescent CdSe QDs containing Bacillus licheniformis bioprobes for Copper (II) detection in water

Quantum dots (QDs) are semiconductor nanoparticles (NPs) that offer valuable functionality for cellular labeling, drug delivery, solar cells and quantum computation. In this study, we reported that CdSe QDs could be bio-synthesized in Bacillus licheniformis. After optimization, the obtained CdSe QDs exhibited a uniform particle size of 3.71±0.04nm with a maximum fluorescence emission wavelength at 550nm and the synthetical positive ratio can reach up to 87%. Spectral properties, constitution, particle sizes and crystalline phases of the CdSe QDs were systematically and integrally investigated. The CdSe QD-containing Bacillus licheniformis cells were further used as whole fluorescent bio-probes to detect copper (II) (Cu²⁺) in water, which demonstrated a low limit of detection (0.91μM). The assay also showed a good selectivity for Cu²⁺ over other ions including Al³⁺, Cd²⁺, Mg²⁺, K⁺, Na⁺, NH₄⁺, Zn²⁺, CH₃COO⁺, Pb²⁺ and I^-. Our study suggests the fluorescent CdSe QDs-containing Bacillus licheniformis bio-probes as a promising approach for detection of Cu²⁺ in complex solution environment.

ATP synthesis in the energy metabolism pathway: a new perspective for manipulating CdSe quantum dots biosynthesized in Saccharomyces cerevisiae

Due to a growing trend in their biomedical application, biosynthesized nanomaterials are of great interest to researchers nowadays with their biocompatible, low-energy consumption, economic, and tunable characteristics. It is important to understand the mechanism of biosynthesis in order to achieve more efficient applications. Since there are only rare studies on the influences of cellular energy levels on biosynthesis, the influence of energy is often overlooked. Through determination of the intracellular ATP concentrations during the biosynthesis process, significant changes were observed. In addition, ATP synthesis deficiency caused great decreases in quantum dots (QDs) biosynthesis in the Δatp1, Δatp2, Δatp14, and Δatp17 strains. With inductively coupled plasma-atomic emission spectrometry and atomic absorption spectroscopy analyses, it was found that ATP affected the accumulation of the seleno-precursor and helped with the uptake of Cd and the formation of QDs. We successfully enhanced the fluorescence intensity 1.5 or 2 times through genetic modification to increase ATP or SeAM (the seleno analog of S-adenosylmethionine, the product that would accumulate when ATP is accrued). This work explains the mechanism for the correlation of the cellular energy level and QDs biosynthesis in living cells, demonstrates control of the biosynthesis using this mechanism, and thus provides a new manipulation strategy for the biosynthesis of other nanomaterials to widen their applications.

Fluorescence dynamics of the biosynthesized CdSe quantum dots in Candida utilis

Organisms served as factories of bio-assembly of nanoparticles attracted a lot of attentions due to the safe, economic and environmental-benignity traits, especially the fabrication of the super fluorescence properties quantum dots (QDs). However, information about the developmental dynamics of QDs in living organisms is still lacking. In this work, we synthesized cadmium-selenium (CdSe) QDs in Candida utilis WSH02-08, and then tracked and quantitatively characterized the developmental dynamics (photoactivation, photostable and photobleaching processes) of bio-QDs by translating fluorescence microscopy movies into visual quantitative curve. These findings shed light on the fluorescence properties of the bio-assembled QDs and are expected to accelerate the applications of the synthesized QDs in vivo. It provided a new way to screen bio-QDs and monitor the quality of QDs in vivo.

Highly Sensitive Naked-Eye Assay for Enterovirus 71 Detection Based on Catalytic Nanoparticle Aggregation and Immunomagnetic Amplification

Development of sensitive, convenient, and cost-effective virus detection product is of great significance to meet the growing demand of clinical diagnosis at the early stage of virus infection. Herein, a naked-eye readout of immunoassay by means of virion bridged catalase-mediated in situ reduction of gold ions and growth of nanoparticles, has been successfully proposed for rapid visual detection of Enterovirus 71 (EV71). Through tailoring the morphologies of the produced gold nanoparticles (GNPs) varying between dispersion and aggregation, a distinguishing color changing was ready for observation. This colorimetric detection assay, by further orchestrating the efficient magnetic enrichment and the high catalytic activity of enzyme, is managed to realize highly sensitive detection of EV71 virions with the limit of detection (LOD) down to 0.65 ng/mL. Our proposed method showed a much lower LOD value than the commercial ELISA for EV71 virion detection. Comparing to the current clinical gold standard polymerase chain reaction (PCR) method, our strategy provided the same diagnostic outcomes after testing real clinical samples. Besides, this strategy has no need of complicated sample pretreatment or expensive instruments. Our presented naked-eye immunoassay method holds a promising prospect for the early detection of virus-infectious disease especially in resource-constrained settings.

Biosynthesis of Inorganic Nanoparticles: A Fresh Look at the Control of Shape, Size and Composition

Several methodologies have been devised for the design of nanomaterials. The "Holy Grail" for materials scientists is the cost-effective, eco-friendly synthesis of nanomaterials with controlled sizes, shapes and compositions, as these features confer to the as-produced nanocrystals unique properties making them appropriate candidates for valuable bio-applications. The present review summarizes published data regarding the production of nanomaterials with special features via sustainable methodologies based on the utilization of natural bioresources. The richness of the latter, the diversity of the routes adopted and the tuned experimental parameters have led to the fabrication of nanomaterials belonging to different chemical families with appropriate compositions and displaying interesting sizes and shapes. It is expected that these outstanding findings will encourage researchers and attract newcomers to continue and extend the exploration of possibilities offered by nature and the design of innovative and safer methodologies towards the synthesis of unique nanomaterials, possessing desired features and exhibiting valuable properties that can be exploited in a profusion of fields.

Facile Coating Strategy to Functionalize Inorganic Nanoparticles for Biosensing

The use of inorganic nanoparticles (NPs) for biosensing requires that they exhibit high colloidal stability under various physiological conditions. Here, we report on a general approach to render hydrophobic NPs into hydrophilic ones that are ready for bioconjugation. The method uses peglyated polymers conjugated with multiple dopamines, which results in multidentate coordination. As proof-of-concept, we applied the coating to stabilize ferrite and lanthanide NPs synthesized by thermal decomposition. Both polymer-coated NPs showed excellent water solubility and were stable at high salt concentrations under physiological conditions. We used these NPs as molecular-sensing agents to detect exosomes and bacterial nucleic acids.

Rapid detection of viral antibodies based on multifunctional Staphylococcus aureus nanobioprobes

Biosynthesis of nanoparticles inside S. aureus cells has enhanced the sensitivity of immunoassays based on the S. aureus nanoparticles. However, the current methods are limited to antigen detection by conjugating IgG antibodies on S. aureus nanoparticles. In this study, a simple way to conjugate antigens to the S. aureus nanobioparticles was developed by utilizing a cell wall binding domain (CBD) from a bacteriophage lysin PlyV12. Based on this novel design, simple agglutination tests of the IgG antibodies of Ebola virus (EBOV) nucleoprotein (NP) and Middle East Respiratory Virus (MERS) NP in rabbit sera were successfully developed by conjugating the S. aureus nanobioparticles with two fusion proteins EBOV NP- CBD and MERS NP-CBD, respectively. The conjugation was done easily by just mixing the fusion proteins with the S. aureus nanoparticles. The detection time was within 20 min without any special equipment or expertise. As far as we know, this is the first time to realize the detection of viral antibodies based on S. aureus nanoparticles.

Ultrafast Nanocrystals Decorated Micromotors for On-Site Dynamic Chemical Processes

CdS-polyaniline-Pt and ZnS-polyaniline-Pt micromotors have been synthesized and characterized. The nanocrystals are generated "in situ" during the template electrosynthesis of the micromotors while being simultaneously trapped in the polymeric network, generating a hybrid structure. The presence of nanocrystal "edges" in the inner polyaniline layer result in a rough Pt catalytic surface and enhanced electron transfer for highly efficient bubble propulsion at remarkable speeds of over 2500 μm/s. The incorporation of CdS and ZnS nanocrystals impart several attractive functions, including cation-exchange based chemical transformation capabilities and enhanced photocatalytic performance. The remarkable ion-exchange properties of ZnS-polyaniline (PANI)-Pt micromotors are illustrated for the cation exchange of heavy metals cations. The superior photocatalytic performance of CdS-PANI-Pt micromotors is used for the enhanced photocatalytic oxidation of bisphenol A. Such self-propelled micromotors act as highly efficient dynamic platforms that offer significantly shorter and more efficient processes as compared with common static operations. The attractive properties of these micromotors will pave the way for diverse sensing, decontamination, energy generation, or electronic applications.

Simple and sensitive microbial pathogen detection using a label-free DNA amplification assay

By the combination of quaternized magnetic nanoparticles and a label-free exonuclease III-assisted DNA amplification assay, we report a simple and facile strategy for the convenient and highly sensitive detection of microbial pathogens, with a detection limit of down to 50 cells mL(-1).

A Biological Approach for the Synthesis of Bismuth Nanoparticles: Using Thiolated M13 Phage as Scaffold

We report the synthesis of Bi nanoparticles (Bi NPs) using the M13 phage as scaffold. The p8 protein of the phage is functionalized with thiol groups of different lengths, and these thiolated regions act as nucleation centers for Bi(3+) ions. The size distribution, shape, and resilience to oxidation of the Bi NPs depend on the length of the thiol group used. The NPs are characterized by high resolution transmission electron microscopy, Raman, and IR spectroscopies, matrix assisted laser desorption/ionization, and optical absorption. These results show that the nanoparticles are crystalline and have a typical diameter of ∼3.0 nm. The method of preparation presented here is reproducible and implies "greener" conditions than those reported elsewhere. To the best of our knowledge, this is the first report of bismuth nanoparticles synthesized by a biomineralization method.

Visual and efficient immunosensor technique for advancing biomedical applications of quantum dots on Salmonella detection and isolation

It is a great challenge in nanotechnology for fluorescent nanobioprobes to be applied to visually detect and directly isolate pathogens in situ. A novel and visual immunosensor technique for efficient detection and isolation of Salmonella was established here by applying fluorescent nanobioprobes on a specially-designed cellulose-based swab (a solid-phase enrichment system). The selective and chromogenic medium used on this swab can achieve the ultrasensitive amplification of target bacteria and form chromogenic colonies in situ based on a simple biochemical reaction. More importantly, because this swab can serve as an attachment site for the targeted pathogens to immobilize and immunologically capture nanobioprobes, our mAb-conjugated QD bioprobes were successfully applied on the solid-phase enrichment system to capture the fluorescence of targeted colonies under a designed excitation light instrument based on blue light-emitting diodes combined with stereomicroscopy or laser scanning confocal microscopy. Compared with the traditional methods using 4-7 days to isolate Salmonella from the bacterial mixture, this method took only 2 days to do this, and the process of initial screening and preliminary diagnosis can be completed in only one and a half days. Furthermore, the limit of detection can reach as low as 10(1) cells per mL Salmonella on the background of 10(5) cells per mL non-Salmonella (Escherichia coli, Proteus mirabilis or Citrobacter freundii, respectively) in experimental samples, and even in human anal ones. The visual and efficient immunosensor technique may be proved to be a favorable alternative for screening and isolating Salmonella in a large number of samples related to public health surveillance.

Intracellular Biosynthesis of Fluorescent CdSe Quantum Dots in Bacillus subtilis: A Strategy to Construct Signaling Bacterial Probes for Visually Detecting Interaction Between Bacillus subtilis and Staphylococcus aureus

In this work, fluorescent Bacillus subtilis (B. subtilis) cells were developed as probes for imaging applications and to explore behaviorial interaction between B. subtilis and Staphylococcus aureus (S. aureus). A novel biological strategy of coupling intracellular biochemical reactions for controllable biosynthesis of CdSe quantum dots by living B. subtilis cells was demonstrated, through which highly luminant and photostable fluorescent B. subtilis cells were achieved with good uniformity. With the help of the obtained fluorescent B. subtilis cells probes, S. aureus cells responded to co-cultured B. subtilis and to aggregate. The degree of aggregation was calculated and nonlinearly fitted to a polynomial model. Systematic investigations of their interactions implied that B. subtilis cells inhibit the growth of neighboring S. aureus cells, and this inhibition was affected by both the growth stage and the amount of surrounding B. subtilis cells. Compared to traditional methods of studying bacterial interaction between two species, such as solid culture medium colony observation and imaging mass spectrometry detection, the procedures were more simple, vivid, and photostable due to the efficient fluorescence intralabeling with less influence on the cells' surface, which might provide a new paradigm for future visualization of microbial behavior.

Clicking Hydrazine and Aldehyde: The Way to Labeling of Viruses with Quantum Dots

Real-time tracking of fluorophore-tagged viruses in living cells can help uncover virus infection mechanisms. Certainly, the indispensable prerequisite for virus-tracking is to label viruses with some bright and photostable beacons such as quantum dots (QDs) via an appropriate labeling strategy. Herein, we devise a convenient hydrazine-aldehyde based strategy to label viruses with QDs through the conjugation of 4-formylbenzoate (4FB) modified QDs to 6-hydrazinonicotinate acetone hydrazone (HyNic) modified viruses under mild conditions. On the basis of this strategy, viruses can be successfully labeled with QDs with high selectivity, stable conjugation, good reproducibility, high labeling efficiency of 92-93% and maximum retention of both fluorescence properties of QDs and infectivity of viruses, which is very meaningful to tracking and statistical analysis of virus infection processes. By further comparing with the most widely used labeling strategy based on the Biotin-SA system, this new strategy has advantages of both high labeling efficiency and good retention of virus infectivity, thus offering a promising alternative for virus-labeling. Moreover, due to the ubiquitous presence of exposed amino groups on the surface of various viruses, this selective, efficient, reproducible and biofriendly strategy should have good universality for labeling both enveloped and nonenveloped viruses.

Bio-nanoplatforms based on carbon dots conjugating with F-substituted nano-hydroxyapatite for cellular imaging

Carbon dots (CDs) have shown great promise in a wide range of bioapplications due to their tunable optical properties and noncytotoxicity. For the first time, a rational strategy was designed to construct new bio-nanoplatforms based on carboxylic acid terminated CDs (CDs-COOH) conjugating with amino terminated F-substituted nano-hydroxyapatite (NFAp) via EDC/NHS coupling chemistry. The monodisperse NFAp nanorods were functionalized with o-phosphoethanolamine (PEA) to provide them with amino groups and render them hydrophilic with respect to the ligand exchange process. The CDs-COOH@PEA-NFAp conjugates exhibits bright blue fluorescence under UV illumination, excellent photostability and colloidal stability. Due to their low cytotoxicity and good biocompatibility as determined by methyl thiazolyl tetrazolium (MTT) assay, the CDs-COOH@PEA-NFAp conjugates were successfully applied as bio-nanoplatforms to MCF-7 breast cancer cells for cellular imaging in vitro. More importantly, the functional CDs conjugated to NFAp provide an extended and general approach to construct different water-soluble NFAp bio-nanoplatforms for other easily functionalised luminescent materials. Therefore, these green nanoplatforms may be a prospective candidate for applications in bioimaging or targeted biological therapy and drug delivery.

A highly reactive chalcogenide precursor for the synthesis of metal chalcogenide quantum dots

Metal chalcogenide semiconductor nanocrystals (NCs) are ideal inorganic materials for solar cells and biomedical labeling. In consideration of the hazard and instability of alkylphosphines, the phosphine-free synthetic route has become one of the most important trends in synthesizing selenide QDs. Here we report a novel phase transfer strategy to prepare phosphine-free chalcogenide precursors. The anions in aqueous solution were transferred to toluene via electrostatic interactions between the anions and didodecyldimethylammonium bromide (DDAB). The obtained chalcogenide precursors show high reactivity with metal ions in the organic phase and could be applied to the low-temperature synthesis of various metal chalcogenide NCs based on a simple reaction between metal ions (e.g. Ag(+), Pb(2+), Cd(2+)) and chalcogenide anions (e.g. S(2-)) in toluene. In addition to chalcogenide anions, other anions such as BH4(-) ions and AuCl4(-) ions can also be transferred to the organic phase for synthesizing noble metal NCs (such as Ag and Au NCs).

Harnessing Intracellular Biochemical Pathways for In Vitro Synthesis of Designer Tellurium Nanorods

Synthesizing nanomaterials of desired properties is a big challenge, which requires extremely harsh conditions and/or use of toxic materials. More recently developed in vivo methods have brought a different set of problems such as separation and purification of nanomaterials made in vivo. Here, a novel approach that harnesses cellular pathways for in vitro synthesis of high-quality tellurium nanorods with tunable lengths and optical properties is reported. It is first demonstrated that in vivo biochemical pathways could be used to synthesize Te nanorods via the intracellular reduction of TeO3(2-) in living Staphylococcus aureus cells. The pathways to set up a quasi-biological system for Te precursor formation are then utilized, which could further synthesize Te nanorods in vitro. This allows to successfully synthesize in vitro, under routine laboratory conditions, Te nanorods with uniform and tunable lengths, ranging from about 10 to 200 nm, and controllable optical properties with high molar extinction coefficients. The approach here should open new avenues for controllable, facile, and efficient synthesis of designer nanomaterials for diverse industrial and biomedical applications.

Simultaneous Point-of-Care Detection of Enterovirus 71 and Coxsackievirus B3

Human enterovirus 71 (EV71) is one of the pathogens that causes hand, foot, and mouth disease (HFMD), which generally leads to neurological diseases and fatal complications among children. Since the early clinical symptoms from EV71 infection are very similar to those from Coxsackievirus B3 (CVB3) infection, a robust and sensitive detection method that can be used to distinguish EV71 and CVB3 is urgently needed for prompting medical treatment of related diseases. Herein, based on immunomagnetic nanobeads and fluorescent semiconductor CdSe quantum dots (QDs), a method for simultaneous point-of-care detection of EV71 and CVB3 is proposed. The synchronous detection of EV71 and CVB3 virions was achieved within 45 min with high specificity and repeatability. The limits of detection are 858 copies/500 μL for EV71 and 809 copies/500 μL for CVB3.This proposed method was further validated with 20 human throat swab samples obtained from EV71 or CVB3 positive cases, with results 93.3% consistent with those by the real-time PCR method, demonstrating the potential of this method for clinical quantification of EV71 and CVB3. The method may also facilitate the prevention and treatment of the diseases.

Rapid and Quantitative Detection of Avian Influenza A(H7N9) Virions in Complex Matrices Based on Combined Magnetic Capture and Quantum Dot Labeling

Avian influenza A(H7N9) virus, which emerged in China in the spring of 2013, has infected hundreds of people and resulted in many deaths. Herein, a rapid and quantitative assay is proposed for the one-step detection of H7N9 virions. Immunomagnetic nanospheres (IMNs) and antibody-conjugated quantum dots (Ab-QDs) are simultaneously employed to capture and identify the target virus, leading to a high efficiency, good specificity, and strong anti-interference ability. Moreover, this reliable detection assay, which combines the efficient magnetic enrichment and the unique photophysical properties of QDs, can achieve a high sensitivity for a low detection limit. At the same time, this detection strategy shows great flexibility for employment in a variety of fluorescence detectors, including fluorescence spectrometry, microscope assays, and handheld UV lamp tests. Furthermore, our one-step detection strategy induces very little change in the integrity of the vulnerable virions, which enables additional genotyping testing following the fluorescence detection. The present study, thus, reports a rapid and quantitative approach for the detection of H7N9 virions based on simultaneous magnetic capture and QD labeling, thereby providing a higher probability for detection and therefore faster diagnosis of H7N9-infected patients.

Transmutation of Personal Glucose Meters into Portable and Highly Sensitive Microbial Pathogen Detection Platform

Herein, for the first time, we presented a simple and general approach by using personal glucose meters (PGM) for portable and ultrasensitive detection of microbial pathogens. Upon addition of pathogenic bacteria, glucoamylase-quaternized magnetic nanoparticles (GA-QMNPS) conjugates were disrupted by the competitive multivalent interactions between bacteria and QMNPS, resulting in the release of GA. After magnetic separation, the free GA could catalyze the hydrolysis of amylose into glucose for quantitative readout by PGM. In such way, PGM was transmuted into a bacterial detection device and extremely low detection limits down to 20 cells mL(-1) was achieved. More importantly, QMNPS could inhibit the growth of the bacteria and destroy its cellular structure, which enabled bacteria detection and inhibition simultaneously. The simplicity, portability, sensitivity and low cost of presented work make it attractive for clinical applications.

Inorganic nanoparticles engineered to attack bacteria

Antibiotics delivered to bacteria using engineered nanoparticles (NP), offer a powerful and efficient means to kill or control bacteria, especially those already resistant to antibiotics.

Crucial factors in biosynthesis of fluorescent CdSe quantum dots in Saccharomyces cerevisiae

Simple, controllable and repeatable procedures to biosynthesize CdSe in Saccharomyces cerevisiae are systematically demonstrated.

A living light bulb, ultrasensitive biodetection made easy

A team of scientists led by Professor DW Pang at Wuhan University have developed a new class of fluorescence probes based on bacterial cells. These microbial factories manufacture semiconductor nanocrystals inside and display protein A molecules on cell surface, transforming Staphylococcus aureus (S. aureus) cells into highly fluorescent cellular beacons that can be easily adapted for detection of diverse biological targets.