Dynamic strain-mediated coupling of a single diamond spin to a mechanical resonator

Phonon Networks with Silicon-Vacancy Centers in Diamond Waveguides

We propose and analyze a novel realization of a solid-state quantum network, where separated silicon-vacancy centers are coupled via the phonon modes of a quasi-one-dimensional diamond waveguide. In our approach, quantum states encoded in long-lived electronic spin states can be converted into propagating phonon wave packets and be reabsorbed efficiently by a distant defect center. Our analysis shows that under realistic conditions, this approach enables the implementation of high-fidelity, scalable quantum communication protocols within chip-scale spin-qubit networks. Apart from quantum information processing, this setup constitutes a novel waveguide QED platform, where strong-coupling effects between solid-state defects and individual propagating phonons can be explored at the quantum level.

Controlling the coherence of a diamond spin qubit through its strain environment

The uncontrolled interaction of a quantum system with its environment is detrimental for quantum coherence. For quantum bits in the solid state, decoherence from thermal vibrations of the surrounding lattice can typically only be suppressed by lowering the temperature of operation. Here, we use a nano-electro-mechanical system to mitigate the effect of thermal phonons on a spin qubit - the silicon-vacancy colour centre in diamond - without changing the system temperature. By controlling the strain environment of the colour centre, we tune its electronic levels to probe, control, and eventually suppress the interaction of its spin with the thermal bath. Strain control provides both large tunability of the optical transitions and significantly improved spin coherence. Finally, our findings indicate the possibility to achieve strong coupling between the silicon-vacancy spin and single phonons, which can lead to the realisation of phonon-mediated quantum gates and nonlinear quantum phononics.

Orbital State Manipulation of a Diamond Nitrogen-Vacancy Center Using a Mechanical Resonator

We study the resonant optical transitions of a single nitrogen-vacancy (NV) center that is coherently dressed by a strong mechanical drive. Using a gigahertz-frequency diamond mechanical resonator that is strain coupled to a NV center's orbital states, we demonstrate coherent Raman sidebands out to the ninth order and orbital-phonon interactions that mix the two excited-state orbital branches. These interactions are spectroscopically revealed through a multiphonon Rabi splitting of the orbital branches which scales as a function of resonator driving amplitude and is successfully reproduced in a quantum model. Finally, we discuss the application of mechanical driving to engineering NV-center orbital states.

Optical Contactless Measurement of Electric Field-Induced Tensile Stress in Diamond Nanoscale Needles

The application of a high electrostatic field at the apex of monocrystalline diamond nanoscale needles induces an energy splitting of the photoluminescence lines of color centers. In particular, the splitting of the zero-phonon line of the neutral nitrogen-vacancy complex (NV⁰) has been studied within a laser-assisted tomographic atom probe equipped with an in situ microphotoluminescence bench. The measured quadratic dependence of the energy splitting on the applied voltage corresponds to the stress generated on the metal-like apex surface by the electrostatic field. Tensile stress up to 7 GPa has thus been measured in the proximity of the needle apex. Furthermore, the stress scales along the needle shank inversely proportionally to its axial cross section. We demonstrate thus a method for contactless piezo-spectroscopy of nanoscale systems by electrostatic field regulation for the study of their mechanical properties. These results also provide an experimental confirmation to the models of dielectrics surface metallization under high electrostatic field.

Quantum memory and non-demolition measurement of single phonon state with nitrogen-vacancy centers ensemble

In a diamond, the mechanical vibration-induced strain can lead to interaction between the mechanical mode and the nitrogen-vacancy (NV) centers. In this work, we propose to utilize the strain-induced coupling for the quantum non-demolition (QND) single phonon measurement and memory in a diamond. The single phonon in a diamond mechanical resonator can be perfectly absorbed and emitted by the NV centers ensemble (NVE) with adiabatically tuning the microwave driving. An optical laser drives the NVE to the excited states, which have much larger coupling strength to the mechanical mode. By adiabatically eliminating the excited states under large detuning limit, the effective coupling between the mechanical mode and the NVE can be used for QND measurement of the single phonon state. Under realistic experimental conditions, we numerically simulate the scheme. It is found that the fidelity of the absorbing and emitting process can reach a much high value. The overlap between the input and the output phonon shapes can reach 98.57%.

Preparing entangled states between two NV centers via the damping of nanomechanical resonators

We propose an efficient scheme for preparing entangled states between two separated nitrogen-vacancy (NV) centers in a spin-mechanical system via a dissipative quantum dynamical process. The proposal actively exploits the nanomechanical resonator (NAMR) damping to drive the NV centers to the target state through a quantum reservoir engineering approach. The distinct features of the present work are that we turn the detrimental source of noise into a resource and only need high-frequency low-Q mechanical resonators, which make our scheme more simple and feasible in experimental implementation. This protocol may have interesting applications in quantum information processing with spin-mechanical systems.

Advances in diamond nanofabrication for ultrasensitive devices

This paper reviews some of the major recent advances in single-crystal diamond nanofabrication and its impact in nano- and micro-mechanical, nanophotonics and optomechanical components. These constituents of integrated devices incorporating specific dopants in the material provide the capacity to enhance the sensitivity in detecting mass and forces as well as magnetic field down to quantum mechanical limits and will lead pioneering innovations in ultrasensitive sensing and precision measurements in the realm of the medical sciences, quantum sciences and related technologies.

Magnetometry via spin-mechanical coupling in levitated optomechanics

We analyze magnetometry using an optically levitated nanodiamond. We consider a configuration where a magnetic field gradient couples the mechanical oscillation of the diamond with its spin degree of freedom provided by a nitrogen vacancy center. First, we investigate the measurement of the position spectrum of the mechanical oscillator. We find that conditions of ultrahigh vacuum and feedback cooling allow a magnetic field gradient sensitivity of 1μTm^-1/Hz. At high pressure and room temperature, this sensitivity degrades and can attain a value of the order of 100mTm^-1/Hz. Subsequently, we characterize the magnetic field gradient sensitivity obtainable by maneuvering the spin degrees of freedom using Ramsey interferometry. We find that this technique can offer photon-shot noise and spin-projection noise limited magnetic field gradient sensitivity of 100μTm^-1/Hz. We conclude that this hybrid levitated nanomechanical magnetometer provides a favorable and versatile platform for sensing applications.

Plasmon field enhancement oscillations induced by strain-mediated coupling between a quantum dot and mechanical oscillator

We utilize the surface plasmon field of a metal nanoparticle (MNP) to show strain-mediated coupling in a quantum dot-mechanical resonator hybrid system including a quantum dot (QD) embedded within a conical nanowire (NW) and a MNP in the presence of an external field. Based on the numerical solutions of the master equation, we find that a slow oscillation, originating from the strain-mediated coupling between the QD and the NW, appears in the time evolution of the plasmon field enhancement. The results show that the period (about [Formula: see text]) of the slow oscillation is equal to that of the mechanical resonator of NW, which suggests that the time-resolved measurement of the plasmon field enhancement can be easily achieved based on the current experimental conditions. Its amplitude increases with the increasing strain-mediated coupling strength, and under certain conditions there is a linear relationship between them. The slow oscillation of the plasmon field enhancement provides valuable tools for measurements of the mechanical frequency and the strain-mediated coupling strength.

Tailoring spin defects in diamond by lattice charging

Atomic-size spin defects in solids are unique quantum systems. Most applications require nanometre positioning accuracy, which is typically achieved by low-energy ion implantation. A drawback of this technique is the significant residual lattice damage, which degrades the performance of spins in quantum applications. Here we show that the charge state of implantation-induced defects drastically influences the formation of lattice defects during thermal annealing. Charging of vacancies at, for example, nitrogen implantation sites suppresses the formation of vacancy complexes, resulting in tenfold-improved spin coherence times and twofold-improved formation yield of nitrogen-vacancy centres in diamond. This is achieved by confining implantation defects into the space-charge layer of free carriers generated by a boron-doped diamond structure. By combining these results with numerical calculations, we arrive at a quantitative understanding of the formation and dynamics of the implanted spin defects. These results could improve engineering of quantum devices using solid-state systems.

Double-Quantum Spin-Relaxation Limits to Coherence of Near-Surface Nitrogen-Vacancy Centers

We probe the relaxation dynamics of the full three-level spin system of near-surface nitrogen-vacancy (NV) centers in diamond to define a T_{1} relaxation time that sets the T_{2}≤2T_{1} coherence limit of the NV's subset qubit superpositions. We find that double-quantum spin relaxation via electric field noise dominates T_{1} of near-surface NVs at low applied magnetic fields. Furthermore, we differentiate 1/f^{α} spectra of electric and magnetic field noise using a novel noise-spectroscopy technique, with broad applications in probing surface-induced decoherence at material interfaces.

Nitrogen vacancy centers in diamond as angle-squared sensors

Nitrogen-vacancy (NV) centers are defects in diamonds, which, due to their electronic structure, have been extensively studied as magnetic field sensors. Such field detection applications usually employ the NV centers to detect field components aligned with the direction of the internally-defined spin axis of the NV center. In this work we detect magnetic fields which are slightly misaligned with the NV center axis. In particular, we demonstrate that the NV center can measure the square of the angle between the magnetic field and the NV center axis with high sensitivity which diverges as the external field approaches a value pre-defined by the NV center's internal parameters, in agreement with predictions. These results show that NV centers could be used as sensitive transducers for making quantum nondemolition (QND) measurements on systems such as nanomechanical oscillators.

Nanomechanical Sensing Using Spins in Diamond

Nanomechanical sensors and quantum nanosensors are two rapidly developing technologies that have diverse interdisciplinary applications in biological and chemical analysis and microscopy. For example, nanomechanical sensors based upon nanoelectromechanical systems (NEMS) have demonstrated chip-scale mass spectrometry capable of detecting single macromolecules, such as proteins. Quantum nanosensors based upon electron spins of negatively charged nitrogen-vacancy (NV) centers in diamond have demonstrated diverse modes of nanometrology, including single molecule magnetic resonance spectroscopy. Here, we report the first step toward combining these two complementary technologies in the form of diamond nanomechanical structures containing NV centers. We establish the principles for nanomechanical sensing using such nanospin-mechanical sensors (NSMS) and assess their potential for mass spectrometry and force microscopy. We predict that NSMS are able to provide unprecedented AC force images of cellular biomechanics and to not only detect the mass of a single macromolecule but also image its distribution. When combined with the other nanometrology modes of the NV center, NSMS potentially offer unparalleled analytical power at the nanoscale.

Cooling a mechanical resonator with nitrogen-vacancy centres using a room temperature excited state spin-strain interaction

Cooling a mechanical resonator mode to a sub-thermal state has been a long-standing challenge in physics. This pursuit has recently found traction in the field of optomechanics in which a mechanical mode is coupled to an optical cavity. An alternate method is to couple the resonator to a well-controlled two-level system. Here we propose a protocol to dissipatively cool a room temperature mechanical resonator using a nitrogen-vacancy centre ensemble. The spin ensemble is coupled to the resonator through its orbitally-averaged excited state, which has a spin–strain interaction that has not been previously studied. We experimentally demonstrate that the spin–strain coupling in the excited state is 13.5±0.5 times stronger than the ground state spin–strain coupling. We then theoretically show that this interaction, combined with a high-density spin ensemble, enables the cooling of a mechanical resonator from room temperature to a fraction of its thermal phonon occupancy.

An efficient cooling mechanism for nanoscale mechanical resonators would help improve their properties for use in sensing applications. Here, the authors demonstrate a strong interaction between NV centres and a resonator and show how it could be harnessed to achieve a large cooling rate.

A universal and ultrasensitive vectorial nanomechanical sensor for imaging 2D force fields

The miniaturization of force probes into nanomechanical oscillators enables ultrasensitive investigations of forces on dimensions smaller than their characteristic length scales. It also unravels the vectorial character of the force field and how its topology impacts the measurement. Here we present an ultrasensitive method for imaging two-dimensional vectorial force fields by optomechanically following the bidimensional Brownian motion of a singly clamped nanowire. This approach relies on angular and spectral tomography of its quasi-frequency-degenerated transverse mechanical polarizations: immersing the nanoresonator in a vectorial force field not only shifts its eigenfrequencies but also rotates the orientation of the eigenmodes, as a nanocompass. This universal method is employed to map a tunable electrostatic force field whose spatial gradients can even dominate the intrinsic nanowire properties. Enabling vectorial force field imaging with demonstrated sensitivities of attonewton variations over the nanoprobe Brownian trajectory will have a strong impact on scientific exploration at the nanoscale.

Generation of macroscopic Schrödinger cat state in diamond mechanical resonator

We propose a scheme to generate macroscopic Schrödinger cat state (SCS) in diamond mechanical resonator (DMR) via the dynamical strain-mediated coupling mechanism. In our model, the direct coupling between the nitrogen-vacancy (NV) center and lattice strain field enables coherent spin–phonon interactions in the quantum regime. Based on a cyclic Δ-type transition structure of the NV center constructed by combining the quantized mechanical strain field and a pair of external microwave fields, the populations of the different energy levels can be selectively transferred by controlling microwave fields, and the SCS can be created by adjusting the controllable parameters of the system. Furthermore, we demonstrate the nonclassicality of the mechanical SCS both in non-dissipative case and dissipative case. The experimental feasibility and challenge are justified using currently available technology.

Heralded Control of Mechanical Motion by Single Spins

We propose a method to achieve a high degree of control of nanomechanical oscillators by coupling their mechanical motion to single spins. Manipulating the spin alone and measuring its quantum state heralds the cooling or squeezing of the oscillator even for weak spin-oscillator couplings. We analytically show that the asymptotic behavior of the oscillator is determined by a spin-induced thermal filter function whose overlap with the initial thermal distribution of the oscillator determines its cooling, heating, or squeezing. Counterintuitively, the rate of cooling dependence on the instantaneous thermal occupancy of the oscillator renders robust cooling or squeezing even for high initial temperatures and damping rates. We further estimate how the proposed scheme can be used to control the motion of a thin diamond cantilever by coupling it to its defect centers at low temperature.

High Quality Factor Mechanical Resonators Based on WSe2 Monolayers

Suspended monolayer transition metal dichalcogenides (TMD) are membranes that combine ultralow mass and exceptional optical properties, making them intriguing materials for opto-mechanical applications. However, the low measured quality factor of TMD resonators has been a roadblock so far. Here, we report an ultrasensitive optical readout of monolayer TMD resonators that allows us to reveal their mechanical properties at cryogenic temperatures. We find that the quality factor of monolayer WSe2 resonators greatly increases below room temperature, reaching values as high as 1.6 × 10(4) at liquid nitrogen temperature and 4.7 × 10(4) at liquid helium temperature. This surpasses the quality factor of monolayer graphene resonators with similar surface areas. Upon cooling the resonator, the resonant frequency increases significantly due to the thermal contraction of the WSe2 lattice. These measurements allow us to experimentally study the thermal expansion coefficient of WSe2 monolayers for the first time. High Q-factors are also found in resonators based on MoS2 and MoSe2 monolayers. The high quality-factor found in this work opens new possibilities for coupling mechanical vibrational states to two-dimensional excitons, valley pseudospins, and single quantum emitters and for quantum opto-mechanical experiments based on the Casimir interaction.

Scanned probe imaging of nanoscale magnetism at cryogenic temperatures with a single-spin quantum sensor

High-spatial-resolution magnetic imaging has driven important developments in fields ranging from materials science to biology. However, to uncover finer details approaching the nanoscale with greater sensitivity requires the development of a radically new sensor technology. The nitrogen-vacancy (NV) defect in diamond has emerged as a promising candidate for such a sensor on the basis of its atomic size and quantum-limited sensing capabilities. It has remained an outstanding challenge to implement the NV centre as a nanoscale scanning magnetic probe at cryogenic temperatures, however, where many solid-state systems exhibit non-trivial magnetic order. Here, we present NV magnetic imaging down to 6 K with 3 μT Hz(-1/2) field sensitivity, and use the technique to image vortices in the iron pnictide superconductor BaFe2(As0.7P0.3)2 with critical temperature Tc = 30 K. The expansion of NV-based magnetic imaging to cryogenic temperatures will enable future studies of previously inaccessible nanoscale magnetism in condensed-matter systems.

Hybrid Quantum Device with Nitrogen-Vacancy Centers in Diamond Coupled to Carbon Nanotubes

We show that nitrogen-vacancy (NV) centers in diamond interfaced with a suspended carbon nanotube carrying a dc current can facilitate a spin-nanomechanical hybrid device. We demonstrate that strong magnetomechanical interactions between a single NV spin and the vibrational mode of the suspended nanotube can be engineered and dynamically tuned by external control over the system parameters. This spin-nanomechanical setup with strong, intrinsic, and tunable magnetomechanical couplings allows for the construction of hybrid quantum devices with NV centers and carbon-based nanostructures, as well as phonon-mediated quantum information processing with spin qubits.

Deterministic Single-Phonon Source Triggered by a Single Photon

We propose a scheme that enables the deterministic generation of single phonons at gigahertz frequencies triggered by single photons in the near infrared. This process is mediated by a quantum dot embedded on chip in an optomechanical circuit, which allows for the simultaneous control of the relevant photonic and phononic frequencies. We devise new optomechanical circuit elements that constitute the necessary building blocks for the proposed scheme and are readily implementable within the current state-of-the-art of nanofabrication. This will open new avenues for implementing quantum functionalities based on phonons as an on-chip quantum bus.

Large and Uniform Optical Emission Shifts in Quantum Dots Strained along Their Growth Axis

We introduce a calibration method to quantify the impact of external mechanical stress on the emission wavelength of distinct quantum dots (QDs). Specifically, these emitters are integrated in a cross-section of a semiconductor core wire and experience a longitudinal strain that is induced by an amorphous capping shell. Detailed numerical simulations show that, thanks to the shell mechanical isotropy, the strain in the core is uniform, which enables a direct comparison of the QD responses. Moreover, the core strain is determined in situ by an optical measurement, yielding reliable values for the QD emission tuning slope. This calibration technique is applied to self-assembled InAs QDs submitted to incremental elongation along their growth axis. In contrast to recent studies conducted on similar QDs submitted to a uniaxial stress perpendicular to the growth direction, optical spectroscopy reveals up to ten times larger tuning slopes, with a moderate dispersion. These results highlight the importance of the stress direction to optimize the QD optical shift, with general implications, both in static and dynamic regimes. As such, they are in particular relevant for the development of wavelength-tunable single-photon sources or hybrid QD opto-mechanical systems.

Scalable Fabrication of Integrated Nanophotonic Circuits on Arrays of Thin Single Crystal Diamond Membrane Windows

Diamond has emerged as a promising platform for nanophotonic, optical, and quantum technologies. High-quality, single crystalline substrates of acceptable size are a prerequisite to meet the demanding requirements on low-level impurities and low absorption loss when targeting large photonic circuits. Here, we describe a scalable fabrication method for single crystal diamond membrane windows that achieves three major goals with one fabrication method: providing high quality diamond, as confirmed by Raman spectroscopy; achieving homogeneously thin membranes, enabled by ion implantation; and providing compatibility with established planar fabrication via lithography and vertical etching. On such suspended diamond membranes we demonstrate a suite of photonic components as building blocks for nanophotonic circuits. Monolithic grating couplers are used to efficiently couple light between photonic circuits and optical fibers. In waveguide coupled optical ring resonators, we find loaded quality factors up to 66 000 at a wavelength of 1560 nm, corresponding to propagation loss below 7.2 dB/cm. Our approach holds promise for the scalable implementation of future diamond quantum photonic technologies and all-diamond photonic metrology tools.

Patterned Formation of Highly Coherent Nitrogen-Vacancy Centers Using a Focused Electron Irradiation Technique

We demonstrate fully three-dimensional and patterned localization of nitrogen-vacancy (NV) centers in diamond with coherence times in excess of 1 ms. Nitrogen δ-doping during chemical vapor deposition diamond growth vertically confines nitrogen to 4 nm while electron irradiation with a transmission electron microscope laterally confines vacancies to less than 450 nm. We characterize the effects of electron energy and dose on NV formation. Importantly, our technique enables the formation of reliably high-quality NV centers inside diamond nanostructures with applications in quantum information and sensing.

Optomechanical Quantum Control of a Nitrogen-Vacancy Center in Diamond

We demonstrate optomechanical quantum control of the internal electronic states of a diamond nitrogen-vacancy (NV) center in the resolved-sideband regime by coupling the NV to both optical fields and surface acoustic waves via a phonon-assisted optical transition and by taking advantage of the strong excited-state electron-phonon coupling of a NV center. Optomechanically driven Rabi oscillations as well as quantum interferences between the optomechanical sideband and the direct dipole-optical transitions are realized. These studies open the door to using resolved-sideband optomechanical coupling for quantum control of both the atomlike internal states and the motional states of a coupled NV-nanomechanical system, leading to the development of a solid-state analog of trapped ions.

Optimized quantum sensing with a single electron spin using real-time adaptive measurements

Quantum sensors based on single solid-state spins promise a unique combination of sensitivity and spatial resolution. The key challenge in sensing is to achieve minimum estimation uncertainty within a given time and with high dynamic range. Adaptive strategies have been proposed to achieve optimal performance, but their implementation in solid-state systems has been hindered by the demanding experimental requirements. Here, we realize adaptive d.c. sensing by combining single-shot readout of an electron spin in diamond with fast feedback. By adapting the spin readout basis in real time based on previous outcomes, we demonstrate a sensitivity in Ramsey interferometry surpassing the standard measurement limit. Furthermore, we find by simulations and experiments that adaptive protocols offer a distinctive advantage over the best known non-adaptive protocols when overhead and limited estimation time are taken into account. Using an optimized adaptive protocol we achieve a magnetic field sensitivity of 6.1 ± 1.7 nT Hz(-1/2) over a wide range of 1.78 mT. These results open up a new class of experiments for solid-state sensors in which real-time knowledge of the measurement history is exploited to obtain optimal performance.

Design of defect spins in piezoelectric aluminum nitride for solid-state hybrid quantum technologies

Spin defects in wide-band gap semiconductors are promising systems for the realization of quantum bits, or qubits, in solid-state environments. To date, defect qubits have only been realized in materials with strong covalent bonds. Here, we introduce a strain-driven scheme to rationally design defect spins in functional ionic crystals, which may operate as potential qubits. In particular, using a combination of state-of-the-art ab-initio calculations based on hybrid density functional and many-body perturbation theory, we predicted that the negatively charged nitrogen vacancy center in piezoelectric aluminum nitride exhibits spin-triplet ground states under realistic uni- and bi-axial strain conditions; such states may be harnessed for the realization of qubits. The strain-driven strategy adopted here can be readily extended to a wide range of point defects in other wide-band gap semiconductors, paving the way to controlling the spin properties of defects in ionic systems for potential spintronic technologies.

Electromechanical control of nitrogen-vacancy defect emission using graphene NEMS

Despite recent progress in nano-optomechanics, active control of optical fields at the nanoscale has not been achieved with an on-chip nano-electromechanical system (NEMS) thus far. Here we present a new type of hybrid system, consisting of an on-chip graphene NEMS suspended a few tens of nanometres above nitrogen-vacancy centres (NVCs), which are stable single-photon emitters embedded in nanodiamonds. Electromechanical control of the photons emitted by the NVC is provided by electrostatic tuning of the graphene NEMS position, which is transduced to a modulation of NVC emission intensity. The optomechanical coupling between the graphene displacement and the NVC emission is based on near-field dipole–dipole interaction. This class of optomechanical coupling increases strongly for smaller distances, making it suitable for nanoscale devices. These achievements hold promise for selective control of emitter arrays on-chip, optical spectroscopy of individual nano-objects, integrated optomechanical information processing and open new avenues towards quantum optomechanics.

Active control of optical fields at the nanoscale is difficult to achieve. Here, the authors fabricate an on-chip graphene NEMS suspended a few tens of nanometres above nitrogen vacancy centres and demonstrate electromechanical control of the photons emitted by electrostatic tuning of the graphene NEMS position.

Nanofluidics of Single-Crystal Diamond Nanomechanical Resonators

Single-crystal diamond nanomechanical resonators are being developed for countless applications. A number of these applications require that the resonator be operated in a fluid, that is, a gas or a liquid. Here, we investigate the fluid dynamics of single-crystal diamond nanomechanical resonators in the form of nanocantilevers. First, we measure the pressure-dependent dissipation of diamond nanocantilevers with different linear dimensions and frequencies in three gases, He, N2, and Ar. We observe that a subtle interplay between the length scale and the frequency governs the scaling of the fluidic dissipation. Second, we obtain a comparison of the surface accommodation of different gases on the diamond surface by analyzing the dissipation in the molecular flow regime. Finally, we measure the thermal fluctuations of the nanocantilevers in water and compare the observed dissipation and frequency shifts with theoretical predictions. These findings set the stage for developing diamond nanomechanical resonators operable in fluids.

Observation of a phononic Mollow triplet in a multimode hybrid spin-nanomechanical system

Reminiscent of the bound character of a qubit's dynamics confined on the Bloch sphere, the observation of a Mollow triplet in the resonantly driven qubit fluorescence spectrum represents one of the founding signatures of quantum electrodynamics. Here we report on its observation in a hybrid spin-nanomechanical system, where a nitrogen-vacancy spin qubit is magnetically coupled to the vibrations of a silicon carbide nanowire. A resonant microwave field turns the originally parametric hybrid interaction into a resonant process, where acoustic phonons are now able to induce transitions between the dressed qubit states, leading to synchronized spin-oscillator dynamics. We further explore the vectorial character of the hybrid coupling to the bidimensional deformations of the nanowire. The demonstrated microwave assisted synchronization of the spin-oscillator dynamics opens novel perspectives for the exploration of spin-dependent forces, the key ingredient for quantum state transfer.

The Mollow triplet, originally observed in the fluorescence spectrum of an optically excited two level system, is a signature of quantum electrodynamics. Here, the authors observe its phononic equivalent by magnetically coupling a single nitrogen-vacancy qubit to the vibrations of a silicon carbide nanowire.

Proposition of a Silica Nanoparticle-Enhanced Hybrid Spin-Microcantilever Sensor Using Nonlinear Optics for Detection of DNA in Liquid

We theoretically propose a method based on the combination of a nonlinear optical mass sensor using a hybrid spin-microcantilever and the nanoparticle-enhanced technique, to detect and monitor DNA mutations. The technique theoretically allows the mass of external particles (ssDNA) landing on the surface of a hybrid spin-microcantilever to be detected directly and accurately at 300 K with a mass responsivity 0.137 Hz/ag in situ in liquid. Moreover, combined with the nanoparticle-enhanced technique, even only one base pair mutation in the target DNA sequence can be identified in real time accurately, and the DNA hybridization reactions can be monitored quantitatively. Furthermore, in situ detection in liquid and measurement of the proposed nonlinear optical spin resonance spectra will minimize the experimental errors.

Large phase-by-phase modulations in atomic interfaces

Phase-resonant closed-loop optical transitions can be engineered to achieve broadly tunable light phase shifts. Such a novel phase-by-phase control mechanism does not require a cavity and is illustrated here for an atomic interface where a classical light pulse undergoes radian level phase modulations all-optically controllable over a few micron scale. It works even at low intensities and hence may be relevant to new applications of all-optical weak-light signal processing.

Decoherence of Near-Surface Nitrogen-Vacancy Centers Due to Electric Field Noise

We show that electric field noise from surface charge fluctuations can be a significant source of spin decoherence for near-surface nitrogen-vacancy (NV) centers in diamond. This conclusion is based on the increase in spin coherence observed when the diamond surface is covered with high-dielectric-constant liquids, such as glycerol. Double-resonance experiments show that improved coherence occurs even though the coupling to nearby electron spins is unchanged when the liquid is applied. Multipulse spin-echo experiments reveal the effect of glycerol on the spectrum of NV frequency noise.

Sensitive detection of Majorana fermions based on a hybrid spin-microcantilever via enhanced spin resonance spectrum

Motivated by recent experimental progress towards the detection and manipulation of Majorana fermions in ferromagnetic atomic chains on a superconductor, we present a novel proposal based on a single-crystal diamond (SCD) microcantilever with a single nitrogen-vacancy (NV) center spin embedded in ultrapure diamond substrate to probe Majorana fermions in an all-optical domain. With this scheme, a possible distinct Majorana signature is investigated via the electron spin resonance spectrum. In the proposal, the SCD microcantilever behaves as a phonon cavity and is robust for detecting of Majorana fermions, while the NV center spin can be considered as a sensitive probe. Further, the vibration of the microcantilever will enhance the coupling effect, which makes the Majorana fermions more sensitive to detection and the well-established optical NV spin readout technology will certainly promote the detection. This proposed method may provide a potential supplement for the detection of Majorana fermions.

Phonon-induced population dynamics and intersystem crossing in nitrogen-vacancy centers

We report direct measurement of population dynamics in the excited state manifold of a nitrogen-vacancy (NV) center in diamond. We quantify the phonon-induced mixing rate and demonstrate that it can be completely suppressed at low temperatures. Further, we measure the intersystem crossing (ISC) rate for different excited states and develop a theoretical model that unifies the phonon-induced mixing and ISC mechanisms. We find that our model is in excellent agreement with experiment and that it can be used to predict unknown elements of the NV center's electronic structure. We discuss the model's implications for enhancing the NV center's performance as a room-temperature sensor.

Hybrid spin-microcantilever sensor for environmental, chemical, and biological detection

Nowadays hybrid spin-micro/nanomechanical systems are being actively explored for potential quantum sensing applications. In combination with the pump-probe technique or the spin resonance spectrum, we theoretically propose a realistic, feasible, and an exact way to measure the cantilever frequency in a hybrid spin-micromechanical cantilever system which has a strong coherent coupling of a single nitrogen vacancy center in the single-crystal diamond cantilever with the microcantilever. The probe absorption spectrum which exhibits new features such as mechanically induced three-photon resonance and ac Stark effect is obtained. Simultaneously, we further develop this hybrid spin-micromechanical system to be an ultrasensitive mass sensor, which can be operated at 300 K with a mass responsivity 0.137 Hz ag(-1), for accurate sensing of gaseous or aqueous environments, chemical vapors, and biomolecules. And the best performance on the minimum detectable mass can be [Formula: see text] in vacuum. Finally, we illustrate an in situ measurement to detect Angiopoietin-1, a marker of tumor angiogenesis, accurately with this hybrid microcantilever at room temperature.