Polymer chain dynamics and glass transition in athermal polymer/nanoparticle mixtures

Optimizing the Grafting Density of Tethered Chains to Alter the Local Glass Transition Temperature of Polystyrene near Silica Substrates: The Advantage of Mushrooms over Brushes

We measured the local glass transition temperature T_g(z) of polystyrene (PS) as a function of distance z from a silica substrate with end-grafted chains using fluorescence, where competing effects from the free surface have been avoided to focus only on the influence of the tethered interface. The local T_g(z) increase next to the chain-grafted substrate is found to exhibit a maximum increase of 49 ± 2 K relative to bulk at an optimum grafting density that corresponds to the mushroom-to-brush transition regime. This perturbation to the local T_g(z) dynamics of the matrix is observed to persist out to a distance z ≈ 100-125 nm for this optimum grafting density before bulk T_g is recovered, a distance comparable to that previously observed by Baglay and Roth [J. Chem. Phys. 2017, 146, 203307] for PS next to the higher-T_g polymer polysulfone.

Interactions between brush-grafted nanoparticles within chemically identical homopolymers: the effect of brush polydispersity

We systematically examined the polymer-mediated interparticle interactions between polymer-grafted nanoparticles (NPs) within chemically identical homopolymer matrices through experimental and computational efforts. In experiments, we prepared thermally stable gold NPs grafted with polystyrene (PS) or poly(methyl methacrylate) (PMMA), and they were mixed with corresponding homopolymers. The nanocomposites are well dispersed when the molecular weight ratio of free to grafted polymers, α, is small. For α above 10, NPs are partially aggregated or clumped within the polymer matrix. Such aggregation of NPs at large α has been understood as an autophobic dewetting behavior of free homopolymers on brushes. In order to theoretically investigate this phenomenon, we calculated two particle interaction using self-consistent field theory (SCFT) with our newly developed numerical scheme, adopting two-dimensional finite volume method (FVM) and multi-coordinate-system (MCS) scheme which makes use of the reflection symmetry between the two NPs. By calculating the polymer density profile and interparticle potential, we identified the effects of several parameters such as brush thickness, particle radius, α, brush chain polydispersity, and chain end mobility. It was found that increasing α is the most efficient method for promoting autophobic dewetting phenomenon, and the attraction keeps increasing up to α = 20. At small α values, high polydispersity in brush may completely nullify the autophobic dewetting, while at intermediate α values, its effect is still significant in that the interparticle attractions are heavily reduced. Our calculation also revealed that the grafting type is not a significant factor affecting the NP aggregation behavior. The simulation result qualitatively agrees with the dispersion/aggregation transition of NPs found in our experiments.

Nanoconfinement effects of chemically reduced graphene oxide nanoribbons on poly(vinyl chloride)

Polymeric nanocomposites with graphene-based nanocarbons (GNCs) have been extensively studied with emphasis on the percolation of nanofillers toward electrical, rheological, and mechanical reinforcement. In this study, we report an unusual indirect reinforcing phenomenon of highly defective GNCs dispersed in the poly(vinyl chloride) (PVC) matrix via densification of the polymer packing originating from nanoscale confinement. Herein, chemically reduced graphene oxide nanoribbons (C-rGONRs) are employed as a nanofiller. The inclusion of defective and oxygen-functionalized C-rGONRs resulted in a dramatic densification of the PVC host with extremely low C-rGONR loading, largely exceeding the theoretical calculation from a rule of mixture. Along with the densification, the glass transition temperature of PVC also increased by 28.6 °C at 0.1 wt% filler loading. Remarkably, the oxygen barrier property and mechanical toughness under tension for the PVC/C-rGONR nanocomposite were the maximum when the greatest densification occurred. The structure-property relationship of the nanocomposites has been discussed with an emphasis on the nanoscale confinement phenomenon.

Thermomechanical Properties and Glass Dynamics of Polymer-Tethered Colloidal Particles and Films

Polymer-tethered colloidal particles (aka "particle brush materials") have attracted interest as a platform for innovative material technologies and as a model system to elucidate glass formation in complex structured media. In this contribution, Brillouin light scattering is used to sequentially evaluate the role of brush architecture on the dynamical properties of brush particles in both the individual and assembled (film) state. In the former state, the analysis reveals that brush-brush interactions as well as global chain relaxation sensitively depend on grafting density; i.e., more polymer-like behavior is observed in sparse brush systems. This is interpreted to be a consequence of more extensive chain entanglement. In contrast, the local relaxation of films does not depend on grafting density. The results highlight that relaxation processes in particle brush-based materials span a wider range of time and length scales as compared to linear chain polymers. Differentiation between relaxation on local and global scale is necessary to reveal the influence of molecular structure and connectivity on the aging behavior of these complex systems.

Spatially Distributed Rheological Properties in Confined Polymers by Noncontact Shear

When geometrically confined to the nanometer length scale, a condition in which a large portion of the material is in the nanoscale vicinity of interfaces, polymers can show astonishing changes in physical properties. In this investigation, we employ a unique noncontact capillary nanoshearing method to directly probe nanoresolved gradients in the rheological response of ultrathin polymer films as a function of temperature and stress. Results show that ultrathin polymer films, in response to an applied shear stress, exhibit a gradient in molecular mobility and viscosity that originates at the interfaces. We demonstrate, via molecular dynamics simulations, that these gradients in molecular mobility reflect gradients in the average segmental relaxation time and the glass-transition temperature.

Glass transition of polymers in bulk, confined geometries, and near interfaces

When cooled or pressurized, polymer melts exhibit a tremendous reduction in molecular mobility. If the process is performed at a constant rate, the structural relaxation time of the liquid eventually exceeds the time allowed for equilibration. This brings the system out of equilibrium, and the liquid is operationally defined as a glass-a solid lacking long-range order. Despite almost 100 years of research on the (liquid/)glass transition, it is not yet clear which molecular mechanisms are responsible for the unique slow-down in molecular dynamics. In this review, we first introduce the reader to experimental methodologies, theories, and simulations of glassy polymer dynamics and vitrification. We then analyse the impact of connectivity, structure, and chain environment on molecular motion at the length scale of a few monomers, as well as how macromolecular architecture affects the glass transition of non-linear polymers. We then discuss a revised picture of nanoconfinement, going beyond a simple picture based on interfacial interactions and surface/volume ratio. Analysis of a large body of experimental evidence, results from molecular simulations, and predictions from theory supports, instead, a more complex framework where other parameters are relevant. We focus discussion specifically on local order, free volume, irreversible chain adsorption, the Debye-Waller factor of confined and confining media, chain rigidity, and the absolute value of the vitrification temperature. We end by highlighting the molecular origin of distributions in relaxation times and glass transition temperatures which exceed, by far, the size of a chain. Fast relaxation modes, almost universally present at the free surface between polymer and air, are also remarked upon. These modes relax at rates far larger than those characteristic of glassy dynamics in bulk. We speculate on how these may be a signature of unique relaxation processes occurring in confined or heterogeneous polymeric systems.

Synthesis of stable cationic waterborne polyurethane with a high solid content: insight from simulation to experiment

We combined micro-simulation and macro-experiments to explore the structure–morphological–property relations of cationic waterborne polyurethanes with a high solid content.

Unexpected segmental dynamics in polystyrene-grafted silica nanocomposites

Establishing the relationship between interfacial layer chain packing and dynamics remains a continuing challenge in polymer nanocomposites (PNCs). This issue is expected to be significant in our understanding of the mechanism of the dynamic response of such materials and the manner in which these parameters affect the macroscopic properties of PNCs. In this study, we report the dynamics of free polystyrene (PS) and poly(methyl methacrylate) (PMMA) matrix chains, as well as those of polymer chains surrounding the spherical silica nanoparticles (NPs) where silica NPs are either bare or PS grafted, to discriminate the role of grafted chains and interfacial interactions between grafted NPs and the matrix. The α-relaxation dynamics of the PS matrix is unaffected by silica NP loadings, it slows down in PMMA nanocomposites because of polymer-NP interfacial interactions and steric hindrance. More interestingly, we probe the enhanced mobility of the interfacial layer (α'-relaxation) in PNCs filled with grafted NPs, and this phenomenon is further corroborated by the accelerated Maxwell-Wagner-Sillars polarization process in the presence of grafted silica NPs. Moreover, the α'-relaxation time in the vicinity of glass transition temperature of the polymer matrix unexpectedly increases with increasing temperature. Such an anomalous temperature-dependent behavior can be attributed to the influence exerted by slow α-relaxation dynamics. Considering these phenomena and the mechanical properties, we propose a three-layer model to explain the observed behavior of grafted silica NP-filled nanocomposites. These findings provide new insight into the mechanisms responsible for mechanical reinforcement and therefore provide guidance in designing PNCs with tunable macroscopic properties.

Selenium-Containing Amphiphiles Reduced and Stabilized Gold Nanoparticles: Kill Cancer Cells via Reactive Oxygen Species

Selenium has attracted increasing interest in recent decades because of the function of regulating the redox balance in the human body. However, biomedical studies of selenium are still limited. Gold nanoparticles (AuNPs), typically prepared by a first reduction step followed by a second stabilization step, are widely applied in biomedical studies. However, their own anticancer activity is less studied. Here, we report 2 nm AuNPs with significant anticancer activity (IC50 = 20 μM) that is stabilized by a selenium-containing amphiphile EGSe-tMe. The AuNPs are prepared by simply mixing chloroauric acid (HAuCl4) with EGSe-tMe, which acts as both a reducing agent and a stabilizer. In contrast to AuNPs prepared by EGSe-tMe, EGSe-tMe alone and typically prepared AuNPs show little anticancer activity even at concentrations up to 250 μM. Mechanistic studies suggest that selenium in cooperation with AuNPs can induce high concentrations of reactive oxygen species (ROS) in cancer cells, leading to cellular apoptosis.

Interactions, Structure, and Dynamics of Polymer-Tethered Nanoparticle Blends

We report on the structure, jamming, and dynamics of blends of self-suspended hairy silica nanoparticles grafted with poly(ethylene glycol) (PEG) and poly(methyl methacrylate) (PMMA). We find that favorable enthalpic attraction between tethered PEG and PMMA chains augment previously reported entropic attractions between tethered polymer chains in self-suspended suspensions to enhance particle-particle correlations, increase jamming, and slow down chain dynamics. As with their single-component counterparts, the hairy SiO2-PEG/SiO2-PMMA nanoparticle blends exhibit soft glassy rheological behavior and both the energy dissipated at yielding and the plateau elastic modulus display strong maxima in the symmetric case. A comparison of the small angle X-ray scattering (SAXS) measurements with theoretical analysis from density functional theory (DFT) reveals that the addition of SiO2-PMMA to a self-suspended SiO2-PEG suspension initially leads to a higher degree of stretching of the corona chains, which produces stronger interdigitation of the tethered chains, enhanced jamming, and slower polymer relaxation than observed in the single-component materials. By means of an analysis of the heat of mixing released upon blending tethered and untethered PEG and PMMA chains, we find that the strong enthalpic attraction between the grafted polymer chains enhances entropic attractive forces produced by the space-filling constraint on tethered ligands in self-suspended suspensions to produce entangled-polymer-like physical properties in polymers with molecular weights below the thresholds normally associated with the transition to an entangled state.

Dispersion of PMMA-grafted, mesoscopic iron-oxide rods in polymer films

This study investigates the parameters that affect the dispersion of polymer grafted mesoscopic iron-oxide rods (FeMRs) in polymer matrices. FeMRs (212 nm long by 36 nm in diameter) are grafted with poly(methyl methacrylate) (PMMA) at three different brush molecular weights: 3.7 kg mol(-1), 32 kg mol(-1), and 160 kg mol(-1). Each FeMR sample was cast in a polymer thin film consisting of either PMMA or poly(ethylene oxide) (PEO) each at a molecular weight much higher or much lower than the brush molecular weight. We find that the FeMRs with 160 kg mol(-1) brush disperse in all matrices while the FeMRs with 32 kg mol(-1) and 3.7 kg mol(-1) brushes aggregate in all matrices. We perform simple free energy calculations, taking into account steric repulsion from the brush and van der Waals attraction between FeMRs. We find that there is a barrier for aggregation for the FeMRs with the largest brush, while there is no barrier for the other FeMRs. Therefore, for these mesoscopic particles, the brush size is the main factor that determines the dispersion state of FeMRs in polymer matrices with athermal or weakly attractive brush-matrix interactions. These studies provide new insight into the mechanisms that affect dispersion in polymer matrices of mesoscopic particles and therefore guide the design of composite films with well-dispersed mesoscopic particles.

Manipulating the glass transition behavior of sulfonated polystyrene by functionalized nanoparticle inclusion

Nanoscale interfaces can modify the phase transition behaviors of polymeric materials. Here, we report the double glass transition temperature (Tg) behavior of sulfonated polystyrene (sPS) by the inclusion of 14 nm amine-functionalized silica (NH2-SiO2) nanoparticles, which is different from the single Tg behaviors of neat sPS and silica (SiO2)-filled sPS. The inclusion of 20 wt% NH2-SiO2 nanoparticles results in an increase of Tg by 9.3 °C as well as revealing a second Tg reduced by 44.7 °C compared to the Tg of neat sPS. By contrast, when SiO2 nanoparticles with an identical concentration and size to NH2-SiO2 are dispersed, sPS composites possess a single Tg of 7.3 °C higher than that of the neat sPS. While a nanoscale dispersion is observed for SiO2 nanoparticles, as confirmed by microscopic and X-ray scattering analyses, NH2-SiO2 nanoparticles show the coexistence of micron-scale clustering along with a nanoscale dispersion of the individual nanoparticles. The micro-phase separation contributes to the free volume induced Tg reduction by the plasticization effect, whereas the Tg increase originates from the polymer segment mobility constrained by nanoconfinement and the rigid amorphous fractions deriving from strong polymer-particle interactions.

Molecular dynamics simulations of the structural, mechanical and visco-elastic properties of polymer nanocomposites filled with grafted nanoparticles

Through coarse-grained molecular dynamics simulations, we have studied the effects of grafting density (Σ) and grafted chain length (Lg) on the structural, mechanical and visco-elastic properties of end-grafted nanoparticles (NPs) filled polymer nanocomposites (PNCs). It is found that increasing the grafting density and grafted chain length both enhance the brush/matrix interface thickness and improve the dispersion of NPs, but there seems to exist an optimum grafting density, above which the end-grafted NPs tend to aggregate. The uniaxial stress-strain behavior of PNCs is also examined, showing that the tensile stress is more enhanced by increasing Lg compared to increasing Σ. The tensile modulus as a function of the strain is fitted following our previous work (Soft Matter, 2014, 10, 5099), exhibiting a gradually reduced non-linearity with the increase of Σ and Lg. Meanwhile, by imposing a sinusoidal external shear strain, for the first time we probe the effects of Σ and Lg on the visco-elastic properties such as the storage modulus G', loss modulus G'' and loss factor tan δ of end-grafted NPs filled PNCs. It is shown that the non-linear relation of G' and G'' as a function of shear strain amplitude decreases with the increase of Σ and Lg, which is consistent with experimental observations. We infer that the increased mechanical and reduced non-linear visco-elastic properties are correlated with the enhanced brush/matrix interface and therefore better dispersion of NPs and stronger physical cross-linking. This work may provide some rational means to tune the mechanical and visco-elastic properties of end-grafted NPs filled polymer nanocomposites.

Preformed nanoporous carbon nanotube scaffold-based multifunctional polymer composites

Multifunctional polymer nanocomposites that simultaneously possess high modulus and strength, high thermal stability, novel optical responses, and high electrical and thermal conductivity have been actively researched. Carbon nanotubes are considered an ideal additive for composites because of their superlative physical, electronic and optical properties. While nanotubes have successfully added electrical conductivity, thermal stability, and novel optical responses to polymers, mechanical reinforcements, although substantial, have been well below any theoretical estimations. Here, we integrated preformed hydrogels and aerogels of individually dispersed nanotubes with polymer to increase elastic modulus of composites according to Halpin-Tsai model up to at least 25 vol % of nanotubes. Our solution-based fabrication method allowed us to create bulk composites with tunable form-factors, and with polymers that were incompatible with nanotubes. Further, in this approach, nanotubes were not covalently linked among themselves and to the polymer, so intrinsic optical, electrical, and thermal properties of nanotubes could be exploited. The optically active nanotubes, for example, added a strain-dependent, spatially resolved fluorescence to these composites. Finally, the nanoporous nanotube networks suppressed the polymer glass transition and extended the mechanical integrity of polymer well above its polymer melting point, and both the nanotubes and polymer remained thermally stable above their decomposition temperatures.

3D proton transfer augments bio-photocurrent generation

An enhancement of the photocurrent is achieved in a biohybrid nanocomposite consisting of nanovesicle reconstituted proteorhodopsin and potassium phosphotungstate nanoparticles. With the observation of an accelerated protein photocycle and elevated proton conductivity, this improvement of the photo-electric performance is attributed to the construction of a 3D proton-transfer framework.

Environmental effects on fibre reinforced polymeric composites: evolving reasons and remarks on interfacial strength and stability

The interface between fibre and matrix of fibrous polymeric composites is most critical and decisive in maintaining sustainability, durability and also reliability of this potential material, but unfortunately a comprehensive conclusion is yet to meet the label of confidence for the engineering viability. Fiber reinforced polymer (FRP) composites are being accepted and also utilized as better and reliable alternative materials for repairing and/or replacing conventional materials, starting from tiny objects to mega structure in various engineering applications. The promise and potential of these materials are sometimes threatened in speedy replacement of conventional materials because of their inhomogeneities and inherent susceptibility to degradation due to moist and thermal environments. Environmental conditioning is traditionally believed to be a physical phenomenon but present literature has revealed that the interdiffusion between fiber and polymer matrix resin comprises of physical, chemical, mechanical, physico-chemical and mechano-chemical phenomena. The failure and fracture behavior at ambient conditions itself is a complex phenomenon till at present. The service conditions which are mostly hygrothermal in nature, along with a variation of applied loads make the mechanical behavior nearly unpredictable, far off from conclusions in evaluating the short term as well as long term durability and reliability of FRPs. It is essential to accurately simulate the initial and subsequent evolution process of this kind of damage phenomena, in order to explore the full potential of the mechanical properties of composite laminates. The present review has emphasized the need of complying scattered as well as limited literature on this front, and has focused on creating the urgency to highlight the importance of judicious uses of these materials with minimum safety factors with an aim to achieving lighter weight in enhancing specific properties.

From monomers to self-assembled monolayers: the evolution of molecular mobility with structural confinements

The effect of structural constriction on molecular mobility is investigated by broadband dielectric spectroscopy (BDS) within three types of molecular arrangements: monomers, oligomers and self-assembled monolayers (SAMs). While disordered monomers exhibit a variety of cooperative and local relaxation processes, the constrained nanodomains of oligomers and highly ordered structure of monolayers exhibit much hindered local molecular fluctuations. Particularly, in SAMs, motions of the silane headgroups are totally prevented whereas the polar endgroups forming the monolayer canopy show only one cooperative relaxation process. This latter molecular fluctuation is, for the first time, observed independently from other overlapping dielectric signals. Numerous electrostatic interactions among those dipolar endgroups are responsible for the strong cooperativity and heterogeneity of the canopy relaxation process. Our data analyses also revealed that the bulkiness of dipolar endgroups can disrupt the organization of the monolayer canopy thus increasing their ability to fluctuate as temperature is increased.