Support nanostructure boosts oxygen transfer to catalytically active platinum nanoparticles

Metal-Support Interaction and Charge Distribution in Ceria-Supported Au Particles Exposed to CO

Understanding how reaction conditions affect metal-support interactions in catalytic materials is one of the most challenging tasks in heterogeneous catalysis research. Metal nanoparticles and their supports often undergo changes in structure and oxidation state when exposed to reactants, hindering a straightforward understanding of the structure-activity relations using only ex situ or ultrahigh vacuum techniques. Overcoming these limitations, we explored the metal-support interaction between gold nanoparticles and ceria supports in ultrahigh vacuum and after exposure to CO. A combination of in situ methods (on powder and model Au/CeO₂ samples) and theoretical calculations was applied to investigate the gold/ceria interface and its reactivity toward CO exposure. X-ray photoelectron spectroscopy measurements rationalized by first-principles calculations reveal a distinctly inhomogeneous charge distribution, with Au⁺ atoms in contact with the ceria substrate and neutral Au⁰ atoms at the surface of the Au nanoparticles. Exposure to CO partially reduces the ceria substrate, leading to electron transfer to the supported Au nanoparticles. Transferred electrons can delocalize among the neutral Au atoms of the particle or contribute to forming inert Au^δ- atoms near oxygen vacancies at the ceria surface. This charge redistribution is consistent with the evolution of the vibrational frequencies of CO adsorbed on Au particles obtained using diffuse reflectance infrared Fourier transform spectroscopy.

The Emergence of the Ubiquity of Cerium in Heterogeneous Oxidation Catalysis Science and Technology

Research into the incorporation of cerium into a diverse range of catalyst systems for a wide spectrum of process chemistries has expanded rapidly. This has been evidenced since about 1980 in the increasing number of both scientific research journals and patent publications that address the application of cerium as a component of a multi-metal oxide system and as a support material for metal catalysts. This review chronicles both the applied and fundamental research into cerium-containing oxide catalysts where cerium’s redox activity confers enhanced and new catalytic functionality. Application areas of cerium-containing catalysts include selective oxidation, combustion, NOx remediation, and the production of sustainable chemicals and materials via bio-based feedstocks, among others. The newfound interest in cerium-containing catalysts stems from the benefits achieved by cerium’s inclusion, which include selectivity, activity, and stability. These benefits arise because of cerium’s unique combination of chemical and thermal stability, its redox active properties, its ability to stabilize defect structures in multicomponent oxides, and its propensity to stabilize catalytically optimal oxidation states of other multivalent elements. This review surveys the origins and some of the current directions in the research and application of cerium oxide-based catalysts.

Stability of oxidized states of free-standing and ceria-supported PtOx particles

Nanostructured materials based on CeO2 and Pt play a fundamental role in catalyst design. However, their characterization is often challenging due to their structural complexity and the tendency of the materials to change under reaction conditions. In this work, we combine calculations based on the density functional theory, a machine-learning assisted global optimization method (GOFEE), and ab initio thermodynamics to characterize stable oxidation states of ceria-supported PtyOx particles in different environments. The collection of global minima structures for different stoichiometries resulting from the global optimisation effort is used to assess the effect of temperature, oxygen pressure, and support interactions on the phase diagrams, oxidation states, and geometries of the PtyOx particles. We thus identify favoured structural motifs and O:Pt ratios, revealing that oxidized states of free-standing and ceria-supported platinum particles are more stable than reduced ones under a wide range of conditions. These results indicate that studies rationalizing activity of ceria-supported Pt clusters must consider oxidized states, and that previous understanding of such materials obtained only with fully reduced Pt clusters may be incomplete.

Semi-quantitative design of synergetic surficial/interfacial sites for the semi-continuous oxidation of glycerol

Qualitatively identifying the dominant catalytic site for each step of a semi-continuous reaction and semi-quantitatively correlating such different sites to the catalytic performance is of great significance toward the integration of multiple well-optimized sites on a heterogeneous catalyst. Herein, a series of structurally defined TiOx-based catalysts were synthesized to provide a feasible approach to investigate the aforementioned issues using the semi-continuous oxidation of glycerol as a model reaction. Detailed investigations have verified the simultaneous presence of two kinds of Pt active sites: 1) Negatively charged Pt bound to the oxygen vacancies of modified TiOx in the form of Ptδ--Ov-Ti3+ sites and 2) metallic Pt (Pt0 site) located away from the interface. Meanwhile, the proportion of surficial and interfacial sites varies over this series of catalysts. Combined in situ FTIR experiments revealed that the reaction network was well-tuned via a site cooperation mechanism: The surficial Pt0 sites dissociatively adsorb the OH group of glycerol with a monodentate bonding geometry and the Ptδ--Ov-Ti3+ sites dissociate the C=O bond of the aldehyde group in a bidentate form. Furthermore, CO-FTIR spectroscopy confirmed a correlation between the reaction rate/product selectivity and the fraction of surficial/interfacial sites. A rational proportion of surficial and interfacial sites is key to enabling a high yield of glyceric acid. The most active catalyst with 32% surface sites and 68% interfacial sites exhibited 90.0% glycerol conversion and 68.5% GLYA selectivity. These findings provide a deeper understanding of the structure-activity relationships using qualitative identification and semi-quantitative analysis.

Modeling surface spin polarization on ceria-supported Pt nanoparticles

In this work, we employ density functional theory simulations to investigate possible spin polarization of CeO₂-(111) surface and its impact on the interactions between a ceria support and Pt nanoparticles. With a Gaussian type orbital basis, our simulations suggest that the CeO₂-(111) surface exhibits a robust surface spin polarization due to the internal charge transfer between atomic Ce and O layers. In turn, it can lower the surface oxygen vacancy formation energy and enhance the oxide reducibility. We show that the inclusion of spin polarization can significantly reduce the major activation barrier in the proposed reaction pathway of CO oxidation on ceria-supported Pt nanoparticles. For metal-support interactions, surface spin polarization enhances the bonding between Pt nanoparticles and ceria surface oxygen, while CO adsorption on Pt nanoparticles weakens the interfacial interaction regardless of spin polarization. However, the stable surface spin polarization can only be found in the simulations based on the Gaussian type orbital basis. Given the potential importance in the design of future high-performance catalysts, our present study suggests a pressing need to examine the surface ferromagnetism of transition metal oxides in both experiment and theory.

Probing active sites for carbon oxides hydrogenation on Cu/TiO2 using infrared spectroscopy

The valorization of carbon oxides on metal/metal oxide catalysts has been extensively investigated because of its ecological and economical relevance. However, the ambiguity surrounding the active sites in such catalysts hampers their rational development. Here, in situ infrared spectroscopy in combination with isotope labeling revealed that CO molecules adsorbed on Ti3+ and Cu+ interfacial sites in Cu/TiO2 gave two disparate carbonyl peaks. Monitoring each of these peaks under various conditions enabled tracking the adsorption of CO, CO2, H2, and H2O molecules on the surface. At room temperature, CO was initially adsorbed on the oxygen vacancies to produce a high frequency CO peak, Ti3+-CO. Competitive adsorption of water molecules on the oxygen vacancies eventually promoted CO migration to copper sites to produce a low-frequency CO peak. In comparison, the presence of gaseous CO2 inhibits such migration by competitive adsorption on the copper sites. At temperatures necessary to drive CO2 and CO hydrogenation reactions, oxygen vacancies can still bind CO molecules, and H2 spilled-over from copper also competed for adsorption on such sites. Our spectroscopic observations demonstrate the existence of bifunctional active sites in which the metal sites catalyze CO2 dissociation whereas oxygen vacancies bind and activate CO molecules.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Redox-mediated C-C bond scission in alcohols adsorbed on CeO2-xthin films

The decomposition mechanisms of ethanol and ethylene glycol on well-ordered stoichiometric CeO₂(111) and partially reduced CeO_2-x(111) films were investigated by means of synchrotron radiation photoelectron spectroscopy, resonant photoemission spectroscopy, and temperature programmed desorption. Both alcohols partially deprotonate upon adsorption at 150 K and subsequent annealing yielding stable ethoxy and ethylenedioxy species. The C-C bond scission in both ethoxy and ethylenedioxy species on stoichiometric CeO₂(111) involves formation of acetaldehyde-like intermediates and yields CO and CO₂accompanied by desorption of acetaldehyde, H₂O, and H₂. This decomposition pathway leads to the formation of oxygen vacancies. In the presence of oxygen vacancies, C-O bond scission in ethoxy species yields C₂H₄. In contrast, C-C bond scission in ethylenedioxy species on the partially reduced CeO_2-x(111) is favored with respect to C-O bond scission and yields methanol, formaldehyde, and CO accompanied by the desorption of H₂O and H₂. Still, scission of C-O bonds on both sides of the ethylenedioxy species yields minor amounts of accompanying C₂H₄and C₂H₂. C-O bond scission is coupled with a partial recovery of the lattice oxygen in competition with its removal in the form of water.

Effect of Pd/Ce Loading and Catalyst Components on the Catalytic Abatement of Toluene

Monolithic catalysts are widely used in industrial catalysis. However, in the preparation of a monolithic catalyst, the traditional methods have some drawbacks such as low washcoat uploading ratio and poor uniformity. In the present work, the effects of Pd/Ce loading and catalyst components on the catalytic abatement of toluene were investigated. The acid treatment of the substrate, the particle size of the slurry and the dispersant on the uniformity of the washcoat and the catalytic performance were also explored. Characterisation was achieved via BET, SEM, zeta potential and laser grain-size analyses. The results showed that the catalytic activity of the catalyst increased with the increasing of the Ce content. It was found that the 0.2Pd-0.3Ce/γ-Al2O3 catalysts had the best toluene catalytic activity. The pretreatment of the cordierite with 20% HCl could improve the properties of the cordierite. It was also found that reducing the particle size of the washcoat and adding dispersant PAA could effectively improve the stability of the suspension and the uniformity of the washcoat. When 20% HCl pretreatment was used, the toluene catalytic activity of the monolith catalyst prepared by cordierite increased, in which T10 and T90 decreased by about 5 °C. Decreasing the particle size and dispersant also promoted the efficiency of catalytic degradation.

On the effect of metal loading on the reducibility and redox chemistry of ceria supported Pd catalysts

The effect of Pd loading on the redox characteristics of a ceria support was examined using in situ Pd K-edge XAS, Ce L₃-edge XAS and in situ X-ray diffraction techniques. Analysis of the data obtained from these techniques indicates that the onset temperature for the partial reduction of Ce(IV) to Ce(III), by exposure to H₂, varies inversely with the loading of Pd. Whilst the onset and completion temperatures of the reduction of Ce(IV) to Ce(III) are different, both samples yield the same maximal fraction of Ce(III) formation independent of Pd loading. Furthermore, the partial reduction of Ce is found to be concurrent with the reduction of PdO and demonstrated that the presence of metallic Pd is necessary for the reduction of the CeO₂ support. Upon passivation by room temperature oxidation, a full oxidation of the reduced ceria support was observed. However, only a mild surface oxidation of Pd was identified. The mild passivation of the Pd is found to lead to a highly reactive sample upon a second reduction by H₂. The onset of the reduction of Pd and Ce has been demonstrated to be independent of the Pd loading after a mild passivation with both samples exhibiting near room temperature reduction in the presence of H₂.

Modulating the Chemical Microenvironment of Pt Nanoparticles within Ultrathin Nanosheets of Isoreticular MOFs for Enhanced Catalytic Activity

The catalytic activity of metal nanoparticles (MNPs) embedded in metal-organic frameworks (MOFs) is affected by the electronic interactions between MNPs and MOFs. In this report, we fabricate a series of ultrathin nanosheets of isoreticular MOFs (NMOFs) with different metal nodes as supports and successfully encapsulate Pt NPs within these NMOFs, affording Pt@NMOF-Co, Pt@NMOF-Ni₁Co₁, Pt@NMOF-Ni₃Co₁, and Pt@NMOF-Ni nanocomposites. The microchemical environment on the surface of Pt NPs can be modulated by varying the metal nodes of NMOFs. The catalytic activity of the nanocomposites toward liquid-phase hydrogenation of 1-hexene shows obvious difference, in which Pt@NMOF-Ni possesses the highest activity followed by Pt@NMOF-Ni₃Co₁, Pt@NMOF-Ni₁Co₁, and Pt@NMOF-Co in a decreasing order of activity. Obviously, increasing gradually the amount of Ni²⁺ nodes in the carriers can improve the catalytic activity. The difference of catalytic activity of the nanocomposites might originate from the distinct electron interactions between Pt NPs and NMOFs, as ascertained by X-ray photoelectron spectroscopy spectrum and density functional theory calculations. This work provides a rare example that the catalytic activity of MNPs could be controlled by accurately regulating the microchemical environment using ultrathin NMOFs as supports.

Highly Dispersed Pt Clusters on F-Doped Tin(IV) Oxide Aerogel Matrix: An Ultra-Robust Hybrid Catalyst for Enhanced Hydrogen Evolution

Dispersing the minuscule mass loading without hampering the high catalytic activity and long-term stability of a noble metal catalyst results in its ultimate efficacy for the electrochemical hydrogen evolution reaction (HER). Despite being the most efficient HER catalyst, the use of Pt is curtailed due to its scarcity and tendency to leach out in the harsh electrochemical reaction environment. In this study, we combined F-doped tin(IV) oxide (F-SnO₂) aerogel with Pt catalyst to prevent metallic corrosion and to achieve abundant Pt active sites (approximately 5 nm clusters) with large specific surface area (321 cm²·g^-1). With nanoscopic Pt loading inside the SnO₂ aerogel matrix, the as-synthesized hybrid F-SnO₂@Pt possesses a large specific surface area and high porosity and, thus, exhibits efficient experimental and intrinsic HER activity (a low overpotential of 42 mV at 10 mA·cm^-2 in 0.5 M sulfuric acid), a 22-times larger turnover frequency (11.2 H₂·s^-1) than that of Pt/C at 50 mV, and excellent robustness over 10,000 cyclic voltammetry cycles. The existing metal support interaction and strong intermolecular forces between Pt and F-SnO₂ account for the catalytic superiority and persistence against corrosion of F-SnO₂@Pt compared to commercially used Pt/C. Density functional theory analysis suggests that hybridization between the Pt and F-SnO₂ orbitals enhances intermediate hydrogen atom (H*) adsorption at their interface, which improves the reaction kinetics.

Atomic and Electronic Structure of Pt/TiO2 Catalysts and Their Relationship to Catalytic Activity

Understanding the nature of the interaction between a metal and support, which is known as the metal-support interaction, in supported metal catalysts is crucial to design catalysts with desired properties. Here, we have developed model Pt/TiO₂ catalysts based on the deposition of colloidal Pt nanoparticles and studied their atomic and electronic structures before and after a postdeposition treatment that induces catalytic activity using aberration-corrected scanning transmission electron microscopy, electron energy loss spectroscopy, and first-principles calculations. Direct contact between Pt nanoparticles and TiO₂ is realized after the postdeposition treatment, which is accompanied by the formation of a Ti³⁺ state on the TiO₂ surface close to the Pt nanoparticles and a Pt^δ+ state on the Pt nanoparticles. The origin of these two states and their effect on the catalytic properties are discussed. These findings pave the way for a comprehensive understanding of metal-support interactions in supported metal catalysts.

Metal-nanocluster Science and Technology: My Personal History and Outlook

Metal nanoclusters (NCs) are among the leading targets in research of nanoscale materials, and elucidation of their properties (science) and development of control techniques (technology) have been continuously studied for...

Modification strategies of heterogeneous catalysts for water-gas shift reactions

Featured by high energy density, hydrogen has been deemed as a clean and renewable energy source compared with conventional fossil fuels. Water-gas shift reaction (WGSR) exhibits great potential in the...

Specific reactivity of 4d and 5d transition metals supported over CeO2 for ammonia oxidation

Pt/CeO2 catalysts were most active in selective catalytic oxidation of ammonia, where Pt triggered the activation of surface lattice oxygen, and the dehydrogenation of ammonia assisted by surface lattice oxygen was the rate-determining step.

Oxygen Vacancy-Induced Nonradical Degradation of Organics: Critical Trigger of Oxygen (O2) in the Fe-Co LDH/Peroxymonosulfate System

Ubiquitous oxygen vacancies (Vo) existing in metallic compounds can activate peroxymonosulfate (PMS) for water treatment. However, under environmental conditions, especially oxygenated surroundings, the interactions between Vo and PMS as well as the organics degradation mechanism are still ambiguous. In this study, we provide a novel insight into the PMS activation mechanism over Vo-containing Fe-Co layered double hydroxide (LDH). Experimental results show that Vo/PMS is capable of selective degradation of organics via a single-electron-transfer nonradical pathway. Moreover, O₂ is firstly demonstrated as the most critical trigger in this system. Mechanistic studies reveal that, with abundant electrons confined in the vacant electron orbitals of Vo, O₂ is thermodynamically enabled to capture electrons from Vo to form O₂^•- under the imprinting effect and start the activation process. Simultaneously, Vo becomes electron-deficient and withdraws the electrons from organics to sustain the electrostatic balance and achieve organics degradation (32% for Bisphenol A without PMS). Different from conventional PMS activation, under the collaboration of kinetics and thermodynamics, PMS is endowed with the ability to donate electrons to Vo as a reductant other than an oxidant to form ¹O₂. In this case, ¹O₂ and O₂^•- act as the indispensable intermediate species to accelerate the circulation of O₂ (as high as 14.3 mg/L) in the micro area around Vo, and promote this nano-confinement electron-recycling process with 67% improvement of Bisphenol A degradation. This study provides a brand-new perspective for the nonradical mechanism of PMS activation over Vo-containing metallic compounds in natural environments.

Ambient Air Purification by Nanotechnologies: From Theory to Application

Air pollution has been a recurring problem in northern Chinese cities, and high concentrations of PM2.5 in winter have been a particular cause for concern. Secondary aerosols converted from precursor gases (i.e., nitrogen oxides and volatile organic compounds) evidently account for a large fraction of the PM2.5. Conventional control methods, such as dust removal, desulfurization, and denitrification, help reduce emissions from stationary combustion sources, but these measures have not led to decreases in haze events. Recent advances in nanomaterials and nanotechnology provide new opportunities for removing fine particles and gaseous pollutants from ambient air and reducing the impacts on human health. This review begins with overviews of air pollution and traditional abatement technologies, and then advances in ambient air purification by nanotechnologies, including filtration, adsorption, photocatalysis, and ambient-temperature catalysis are presented—from fundamental principles to applications. Current state-of-the-art developments in the use of nanomaterials for particle removal, gas adsorption, and catalysis are summarized, and practical applications of catalysis-based techniques for air purification by nanomaterials in indoor, semi-enclosed, and open spaces are highlighted. Finally, we propose future directions for the development of novel disinfectant nanomaterials and the construction of advanced air purification devices.

Reduced Carbon Monoxide Saturation Coverage on Vicinal Palladium Surfaces: the Importance of the Adsorption Site

Steps at metal surfaces may influence energetics and kinetics of catalytic reactions in unexpected ways. Here, we report a significant reduction of the CO saturation coverage in Pd vicinal surfaces, which in turn is relevant for the light-off of the CO oxidation reaction. The study is based on a systematic investigation of CO adsorption on vicinal Pd(111) surfaces making use of a curved Pd crystal. A combined X-ray Photoelectron Spectroscopy and DFT analysis allows us to demonstrate that an entire row of atomic sites under Pd steps remains free of CO upon saturation at 300 K, leading to a step-density-dependent reduction of CO coverage that correlates with the observed decrease of the light-off temperature during CO oxidation in vicinal Pd surfaces.

In-situ atmosphere thermal pyrolysis of spindle-like Ce(OH)CO3 to fabricate Pt/CeO2 catalysts: Enhancing Pt-O-Ce bond intensity and boosting toluene degradation

In this work, a series of spindle-like CeO₂ supports with different contents of surface oxygen vacancies were fabricated by an in-situ atmosphere thermal pyrolysis method. Due to the unique surface physicochemical properties of the modified CeO₂ supports, the interaction between Pt and CeO₂ can be regulated during the synthesis of the Pt/CeO₂ catalyst. The abundant oxygen vacancies on the CeO₂ support could preferentially trap Pt²⁺ ions in solution during the Pt impregnation process and enhance the Pt-CeO₂ interaction in the subsequent reduction process, which results in the strongest Pt-O-Ce bonds formed on the PCH catalysts successfully (0.6% Pt loading on the CH support, which generated by thermal pyrolysis of Ce(OH)CO₃ under H₂ atmosphere). The strong Pt-O-Ce bond would trigger abundant surface oxygen species generated and enhanced the lattice oxygen species transfer from CeO₂ supports to Pt nanoparticles. It was crucial to boosting the toluene catalytic activity. Therefore, the PCH catalyst exhibits the highest activity for toluene oxidation (T₁₀ = 120 °C, T₅₀ = 138 °C, and T₉₀ = 150 °C with WHSV = 60,000 mL g^-1 h^-1) and remarkable durability and water resistance among all catalysts. We also conclude that the Pt-O-Ce bond may be the active site for toluene oxidation by calculating the turnover frequencies (TOF_Pt-O-Ce) value for all Pt/CeO₂ catalysts. Moreover, the DFT calculation indicates that the Pt/CeO₂ catalyst with a strong Pt-O-Ce bond possesses the lowest oxygen absorption energy and higher CO tolerance ability, which leads to excellent catalytic performance for toluene and CO catalytic oxidation.

Local Structure and Redox Properties of Amorphous CeO2-TiO2 Prepared Using the H2O2-Modified Sol-Gel Method

Amorphous CeO₂-TiO₂ nanoparticles synthesized by the H₂O₂-modified sol-gel method were investigated in terms of the Ce-O-Ce and Ti-O-Ti linkage, local structure, and redox properties. The decrease in the crystallinity of CeO₂-TiO₂ by H₂O₂ addition was confirmed. The metal–oxygen linkage analysis showed the difference in size of the metal–oxygen network between crystalline CeO₂-TiO₂ and amorphous CeO₂-TiO₂ due to the O₂²⁻ formed by H₂O₂. The local structure of CeO₂-TiO₂ was analyzed with an extended X-ray absorption fine structure (EXAFS), and the oscillation changes in the k space revealed the disordering of CeO₂-TiO₂. The decrease in Ce-O bond length and the Ce-O peak broadening was attributed to O₂²⁻ interfering with the formation of the extended metal–oxygen network. The temperature-programmed reduction of the H₂ profile of amorphous CeO₂-TiO₂ exhibited the disappearance of the bulk oxygen reduction peak and a low-temperature shift of the surface oxygen reduction peak. The H₂ consumption increased compared to crystalline CeO₂-TiO₂, which indicated the improvement of redox properties by amorphization.

Mn-doped nickeltitanate (Ni1-x Mn x TiO3) as a promising support material for PdSn electrocatalysts for methanol oxidation in alkaline media

Nickeltitanate (Ilmenite) has been prepared with stoichiometric variation by substituting Mn in the 'A' site, using the sol-gel method in a highly active form. The PdSn electrocatalyst was then impregnated with nickeltitanate by a microwave-assisted polyol method. The physiochemical characterisation of the synthesized electrocatalyst PdSn-Ni_1-x Mn _x TiO₃ was done by X-ray diffractometry, UV-visible spectrophotometry, Raman spectroscopy and transmission electron microscopy. The elemental composition was obtained using energy dispersive spectra which confirmed the presence of Ni, Mn, Ti, O, Pd and Sn. Electrochemical characterization using cyclic voltammetry and polarization experiments showed that the synthesized PdSn-Ni_1-x Mn _x TiO₃ exhibited an enhanced catalytic activity and better stability in the alkaline medium, compared to conventional PdSn/C catalysts. It was observed that the charge transfers from the support material (Ni_1-x Mn _x TiO₃) to the PdSn electrocatalyst boosted the oxidation reaction. By varying the methanol concentration from 0.5 M to 2.0 M, the resulting current density also varied from 129 to 151 mA cm^-2. This result demonstrated that the prepared material PdSn-Ni_1-x Mn _x TiO₃/C electrocatalyst is an excellent candidate for the methanol oxidation reaction.

The dynamic interplay between water and oxygen vacancy at the near-surface of ceria

Water, even at trace concentrations, strongly increases the CO oxidation activities of the reducible metal oxide supported noble-metal catalysts, where the transfer of proton plays a key role. In this paper, we performed a thorough investigation of the interplay between water molecules and the reduced CeO₂(111) surface. It was found that water molecules can induce the migration of oxygen vacancies which in turn results in the formation of surface protons. The proton then entangles with the near-surface polaron to form polaron-proton pair due to their mutual attractive interactions. The hopping of the polaron can easily trigger the long-range or short-range diffusion of protons mediated by water molecules at the CeO₂(111) surface. These findings provide new insights into the key roles of oxygen vacancies and polarons in reducible oxide based heterogeneous catalysis, which is beneficial for the understanding of the increased activity of reducible oxide supported metal nanoparticles in the presence of water.

Oxidative Strong Metal–Support Interactions

The discoveries and development of the oxidative strong metal–support interaction (OMSI) phenomena in recent years not only promote new and deeper understanding of strong metal–support interaction (SMSI) but also open an alternative way to develop supported heterogeneous catalysts with better performance. In this review, the brief history as well as the definition of OMSI and its difference from classical SMSI are described. The identification of OMSI and the corresponding characterization methods are expounded. Furthermore, the application of OMSI in enhancing catalyst performance, and the influence of OMSI in inspiring discoveries of new types of SMSI are discussed. Finally, a brief summary is presented and some prospects are proposed.

Promoted activity of annealed Rh nanoclusters on thin films of Al2O3/NiAl(100) in the dehydrogenation of Methanol-d4

Annealed Rh nanoclusters on an ordered thin film of Al2O3/NiAl(100) were shown to exhibit a promoted reactivity toward the decomposition of methanol-d4, under both ultrahigh vacuum and near-ambient-pressure conditions. The Rh clusters were grown with vapor deposition onto the Al2O3/NiAl(100) surface at 300 K and annealed to 700 K. The decomposition of methanol-d4 proceeded only through dehydrogenation, with CO and deuterium as products, on Rh clusters both as prepared and annealed. Nevertheless, the catalytic reactivity of the annealed clusters, measured with the production of either CO or deuterium per surface Rh site from the reaction, became at least 2-3 times that of the as-prepared ones. The promoted reactivity results from an altered support effect associated with an annealing-induced mass transport at the surface. Our results demonstrate a possibility to practically prepare reactive Rh clusters, regardless of the cluster size, that can tolerate an elevated reaction temperature, with no decreased reactivity.

Reaction Pathway for Coke-Free Methane Steam Reforming on a Ni/CeO2 Catalyst: Active Sites and the Role of Metal-Support Interactions

Methane steam reforming (MSR) plays a key role in the production of syngas and hydrogen from natural gas. The increasing interest in the use of hydrogen for fuel cell applications demands development of catalysts with high activity at reduced operating temperatures. Ni-based catalysts are promising systems because of their high activity and low cost, but coke formation generally poses a severe problem. Studies of ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) indicate that CH₄/H₂O gas mixtures react with Ni/CeO₂(111) surfaces to form OH, CH_x, and CH_xO at 300 K. All of these species are easy to form and desorb at temperatures below 700 K when the rate of the MSR process is accelerated. Density functional theory (DFT) modeling of the reaction over ceria-supported small Ni nanoparticles predicts relatively low activation barriers between 0.3 and 0.7 eV for complete dehydrogenation of methane to carbon and the barrierless activation of water at interfacial Ni sites. Hydroxyls resulting from water activation allow for CO formation via a COH intermediate with a barrier of about 0.9 eV, which is much lower than that through a pathway involving lattice oxygen from ceria. Neither methane nor water activation is a rate-determining step, and the OH-assisted CO formation through the COH intermediate constitutes a low-barrier pathway that prevents carbon accumulation. The interactions between Ni and the ceria support and the low metal loading are crucial for the reaction to proceed in a coke-free and efficient way. These results pave the way for further advances in the design of stable and highly active Ni-based catalysts for hydrogen production.

Gallium Plasmonic Nanoantennas Unveiling Multiple Kinetics of Hydrogen Sensing, Storage, and Spillover

Hydrogen is the key element to accomplish a carbon-free based economy. Here, the first evidence of plasmonic gallium (Ga) nanoantennas is provided as nanoreactors supported on sapphire (α-Al2 O3 ) acting as direct plasmon-enhanced photocatalyst for hydrogen sensing, storage, and spillover. The role of plasmon-catalyzed electron transfer between hydrogen and plasmonic Ga nanoparticle in the activation of those processes is highlighted, as opposed to conventional refractive index-change-based sensing. This study reveals that, while temperature selectively operates those various processes, longitudinal (LO-LSPR) and transverse (TO-LSPR) localized surface plasmon resonances of supported Ga nanoparticles open selectivity of localized reaction pathways at specific sites corresponding to the electromagnetic hot-spots. Specifically, the TO-LSPR couples light into the surface dissociative adsorption of hydrogen and formation of hydrides, whereas the LO-LSPR activates heterogeneous reactions at the interface with the support, that is, hydrogen spillover into α-Al2 O3 and reverse-oxygen spillover from α-Al2 O3. This Ga-based plasmon-catalytic platform expands the application of supported plasmon-catalysis to hydrogen technologies, including reversible fast hydrogen sensing in a timescale of a few seconds with a limit of detection as low as 5 ppm and in a broad temperature range from room-temperature up to 600 °C while remaining stable and reusable over an extended period of time.

CO Oxidation at Near-Ambient Temperatures over TiO2-Supported Pd-Cu Catalysts: Promoting Effect of Pd-Cu Nanointerface and TiO2 Morphology

Significant improvement of the catalytic activity of palladium-based catalysts toward carbon monoxide (CO) oxidation reaction has been achieved through alloying and using different support materials. This work demonstrates the promoting effects of the nanointerface and the morphological features of the support on the CO oxidation reaction using a Pd-Cu/TiO2 catalyst. Pd-Cu catalysts supported on TiO2 were synthesized with wet chemical approaches and their catalytic activities for CO oxidation reaction were evaluated. The physicochemical properties of the prepared catalysts were studied using standard characterization tools including SEM, EDX, XRD, XPS, and Raman. The effects of the nanointerface between Pd and Cu and the morphology of the TiO2 support were investigated using three different-shaped TiO2 nanoparticles, namely spheres, nanotubes, and nanowires. The Pd catalysts that are modified through nanointerfacing with Cu and supported on TiO2 nanowires demonstrated the highest CO oxidation rates, reaching 100% CO conversion at temperature regime down to near-ambient temperatures of ~45 °C, compared to 70 °C and 150 °C in the case of pure Pd and pure Cu counterpart catalysts on the same support, respectively. The optimized Pd-Cu/TiO2 nanowires nanostructured system could serve as efficient and durable catalyst for CO oxidation at near-ambient temperature.

Single Atomic Pt on SrTiO3 Catalyst in Reverse Water Gas Shift Reactions

Copper catalysts were widely developed for CO2 conversion, but suffered severe sintering at temperatures higher than 300 °C. Platinum was the most active and stable metal for RWGS reactions. However, the high price and scarcity of platinum restrained its application. Downsizing the metal particles can significantly improve the atom efficiency of the precious metal but the size effect of Pt on RWGS reactions was still unclear. In the present work, the single atomic Pt on SrTiO3 was prepared using an impregnation leaching method, and the catalyst showed significant activity for an RWGS reaction, achieving a CO2 conversion rate of 45%, a CO selectivity of 100% and a TOF of 0.643 s−1 at 500 °C. The structures of the catalysts were characterized using XRD, STEM and EXAFS. Especially, the size effect of Pt in RWGS was researched using in situ FTIR and DFT calculations. The results reveal that single Pt atoms are the most active species in RWGS via a “–COOH route” while larger Pt cluster and nanoparticles facilitate the further hydrogenation of CO. The reaction between formate and H* is the rate determination step of an RWGS reaction on a catalyst, in which the reaction barrier can be lowered from 1.54 eV on Pt clusters to 1.29 eV on a single atomic Pt.