How strain can break the scaling relations of catalysis

Role of Surface Strain at Nanocrystalline Pt{110} Facets in Oxygen Reduction Catalysis

We have developed a synthesis method of rhombic dodecahedral Pd@Pt core-shell nanocrystals bound exclusively by {110} facets with controlled numbers of Pt atomic layers to study the surface strain-catalytic activity relationship of Pt{110} facets. Through control over growth kinetics, the epitaxial and conformal overgrowth of Pt shells on the {110} facets of rhombic dodecahedral Pd nanocrystals could be achieved. Notably, the electrocatalytic activity of the Pd@Pt nanocrystals toward oxygen reduction reaction decreased as their Pt shells became thinner and thus more in-plane compressive surface strain was applied, which is in sharp contrast to previous reports on Pt-based catalysts. Density functional theory calculations revealed that the characteristic strain-activity relationship of Pt{110} facets is the result of the counteraction of out-of-plane surface strain against the applied in-plane surface strain, which can effectively impose a tensile environment on the surface atoms of the Pd@Pt nanocrystals under the compressive in-plane strain.

Progress of Heterogeneous Iridium-Based Water Oxidation Catalysts

The water oxidation reaction (or oxygen evolution reaction, OER) plays a critical role in green hydrogen production via water splitting, electrochemical CO₂ reduction, and nitrogen fixation. The four-electron and four-proton transfer OER process involves multiple reaction intermediates and elementary steps that lead to sluggish kinetics; therefore, a high overpotential is necessary to drive the reaction. Among the different water-splitting electrolyzers, the proton exchange membrane type electrolyzer has greater advantages, but its anode catalysts are limited to iridium-based materials. The iridium catalyst has been extensively studied in recent years due to its balanced activity and stability for acidic OER, and many exciting signs of progress have been made. In this review, the surface and bulk Pourbaix diagrams of iridium species in an aqueous solution are introduced. The iridium-based catalysts, including metallic or oxides, amorphous or crystalline, single crystals, atomically dispersed or nanostructured, and iridium compounds for OER, are then elaborated. The latest progress of active sites, reaction intermediates, reaction kinetics, and elementary steps is summarized. Finally, future research directions regarding iridium catalysts for acidic OER are discussed.

Direct Measurements of Surface Strain-Mediated Lateral Interactions between Adsorbates in Colloidal Heteroepitaxy

Surface strain can alter the dynamics of adsorbates, and often, the adsorbates themselves induce and interact via their surface strain fields. In epitaxy, such strain-mediated effects get further compounded when a misfit strain exists due to lattice mismatch between the growing film and substrate. Here, we carry out particle-resolved imaging of heteroepitaxial growth of multilayer colloidal films where the particles interact via a short-range attraction. Surprisingly, although the misfit strain relaxed systematically with film thickness, the adcolloid diffusivity was nonmonotonic. We show that this nonmonotonicity stems from the competition between the spatial extent of self-induced in-layer strain and the short interaction range. Importantly, we provide direct evidence for long-ranged strain-mediated interactions between adsorbates and show that it alters the growing film's morphology.

Strain Effect on Adsorption and Reactions of AHx (A = C, N, O, X £ 3) on In2O3(110), TiO2(110) and ZrO2(101) Surfaces

More and more attention has been paid to strain-based regulation of catalytic activity. To guide regulation of catalytic performance via strain engineering, adsorption and reactions of AHx (A = C, N, O, x £ 3) were investigated on uniformly strained In2O3 (110), rutile TiO2 (110) and tetragonal ZrO2 (101) from -2% to 4%. The results show that adsorption energies vary linearly with strain; expansive strain enhances adsorption of most adsorbates. Unlike the adsorbate scaling relations which are central atom dependent, the adsorbate scaling relations on strained surfaces are central atom independent. C-H/O-H bonds are elongated/shortened with expansive strain, and adsorption energies of CHx generally change more than those of OHx and NHx, which can be rationalized with effective medium theory and pertinent bond energies. Thermodynamically In2O3(110)/ZrO2(101) is most active/inactive. The estimated variation of rate constants at 300K from 0% to 2% strain based on Brønsted−Evans−Polanyi relationship demonstrates great strain regulation potential of catalytic performance on these oxide surfaces. Finally it is demonstrated that strain tends to facilitate the reactions whose sum of stoichiometric number is positive, which can be used as a rule to guide strain engineering for heterogeneous catalysis.

First-principles design of hetero CoM (M = 3d, 4d, 5d block metals) double-atom catalysts for oxygen evolution reaction under alkaline conditions

As an extension of single-atom catalysts, the development of double-atom catalysts with high electrocatalytic activity for the oxygen evolution reaction (OER) is vital to facilitate hydrogen production and industrial applications. The CoM (M = 3d, 4d, 5d block metals) homo and double-atom catalysts supported on nitrogen-doped graphene (CoM/N₄G) were prepared for electrochemical water oxidation under alkaline conditions, and the electrocatalytic activity was studied through density functional theory (DFT) calculations. The hetero CoCu/N₄G double-atom catalyst indicated the highest OER activity with an onset potential of 0.83 V, while the homo Co₂/N₄G catalyst showed a higher onset potential of 1.69 V. The decoupled strain, dopant, and configurational effects based on the notable differences between the homo Co₂/N₄G and CoCu/N₄G explained the enhanced OER activity, implying that the Cu dopant has a crucial impact on boosting the reactivity by reducing the affinity of reaction intermediates. The enhancement could also be understood from the perspective of the electron structure characteristic through d-orbital resolved density of states (ORDOS) (d _{z ²} , d _xz , d _yz , d _xy , and d _{x ²-y ²} ) analysis. From the ORDOS analysis, we found an apparent alteration of the key orbitals between Co₂/N₄G (d _{z ²} , d _xz , and d _yz ) and CoCu/N₄G (d _z2, d _xz , d _yz , and d _xy ) with a substantial change in the overlap ratio (X _d). This theoretical study offers beneficial insights into developing a strategy for efficient OER catalysts utilizing a double-atom structure.

Breaking adsorption-energy scaling limitations of electrocatalytic nitrate reduction on intermetallic CuPd nanocubes by machine-learned insights

The electrochemical nitrate reduction reaction (NO₃RR) to ammonia is an essential step toward restoring the globally disrupted nitrogen cycle. In search of highly efficient electrocatalysts, tailoring catalytic sites with ligand and strain effects in random alloys is a common approach but remains limited due to the ubiquitous energy-scaling relations. With interpretable machine learning, we unravel a mechanism of breaking adsorption-energy scaling relations through the site-specific Pauli repulsion interactions of the metal d-states with adsorbate frontier orbitals. The non-scaling behavior can be realized on (100)-type sites of ordered B2 intermetallics, in which the orbital overlap between the hollow *N and subsurface metal atoms is significant while the bridge-bidentate *NO₃ is not directly affected. Among those intermetallics predicted, we synthesize monodisperse ordered B2 CuPd nanocubes that demonstrate high performance for NO₃RR to ammonia with a Faradaic efficiency of 92.5% at -0.5 V_RHE and a yield rate of 6.25 mol h^-1 g^-1 at -0.6 V_RHE. This study provides machine-learned design rules besides the d-band center metrics, paving the path toward data-driven discovery of catalytic materials beyond linear scaling limitations.

Oxygen Evolution Reaction in Energy Conversion and Storage: Design Strategies Under and Beyond the Energy Scaling Relationship

The oxygen evolution reaction (OER) is the essential module in energy conversion and storage devices such as electrolyzer, rechargeable metal-air batteries and regenerative fuel cells. The adsorption energy scaling relations between the reaction intermediates, however, impose a large intrinsic overpotential and sluggish reaction kinetics on OER catalysts. Developing advanced electrocatalysts with high activity and stability based on non-noble metal materials is still a grand challenge. Central to the rational design of novel and high-efficiency catalysts is the development and understanding of quantitative structure-activity relationships, which correlate the catalytic activities with structural and electronic descriptors. This paper comprehensively reviews the benchmark descriptors for OER electrolysis, aiming to give an in-depth understanding on the origins of the electrocatalytic activity of the OER and further contribute to building the theory of electrocatalysis. Meanwhile, the cutting-edge research frontiers for proposing new OER paradigms and crucial strategies to circumvent the scaling relationship are also summarized. Challenges, opportunities and perspectives are discussed, intending to shed some light on the rational design concepts and advance the development of more efficient catalysts for enhancing OER performance.

Electrocatalytic Hydrogen Oxidation in Alkaline Media: From Mechanistic Insights to Catalyst Design

With the potential to circumvent the need for scarce and cost-prohibitive platinum-based catalysts in proton-exchange membrane fuel cells, anion-exchange membrane fuel cells (AEMFCs) are emerging as alternative technologies with zero carbon emission. Numerous noble metal-free catalysts have been developed with excellent catalytic performance for cathodic oxygen reduction reaction in AEMFCs. However, the anodic catalysts for hydrogen oxidation reaction (HOR) still rely on noble metal materials. Since the kinetics of HOR in alkaline media is 2-3 orders of magnitude lower than that in acidic media, it is a major challenge to either improve the performance of noble metal catalysts or to develop high-performance noble metal-free catalysts. Additionally, the mechanisms of alkaline HOR are not yet clear and still under debate, further hampering the design of electrocatalysts. Against this backdrop, this review starts with the prevailing theories for alkaline HOR on the basis of diverse activity descriptors, i.e., hydrogen binding energy theory and bifunctional theory. The design principles and recent advances of HOR catalysts employing the aforementioned theories are then summarized. Next, the strategies and recent progress in improving the antioxidation capability of HOR catalysts, a thorny issue which has not received sufficient attention, are discussed. Moreover, the significance of correlating computational models with real catalyst structure and the electrode/electrolyte interface is further emphasized. Lastly, the remaining controversies about the alkaline HOR mechanisms as well as the challenges and possible research directions in this field are presented.

Governing Interlayer Strain in Bismuth Nanocrystals for Efficient Ammonia Electrosynthesis from Nitrate Reduction

Electrochemical ammonia (NH₃) synthesis from nitrate (NO₃^-) reduction offers an intriguing approach for both sustainable ammonia synthesis and environmental denitrification, yet it remains hindered by a complicated reaction pathway with various intermediates. Here we present that the interlayer strain compression in bismuth (Bi) nanocrystals can contribute to both activity and selectivity improvement toward NH₃ electrosynthesis from NO₃^- reduction. By virtue of comprehensive spectroscopic studies and theoretical calculations, we untangle that the interlayer lattice compression shortens Bi-Bi bond to broaden the 6p bandwidth for electron delocalization, promoting the chemical affinities of nitrogen intermediates. Such a manipulation facilitates NO₃^- activation to reduce the energy barrier for activity improvement, and also alleviates *NO₂ desorption to suppress nitrite generation. As a result, a strain-compressive Bi electrocatalyst yields a maximal Faradaic efficiency of 90.6% and high generation rate of 46.5 g h^-1 g_cat^-1 with industrially scalable partial current density up to 300 mA cm^-2 for NH₃ product at the optimized conditions, respectively.

Electrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies

Hydrogen energy-based electrochemical energy conversion technologies offer the promise of enabling a transition of the global energy landscape from fossil fuels to renewable energy. Here, we present a comprehensive review of the fundamentals of electrocatalysis in alkaline media and applications in alkaline-based energy technologies, particularly alkaline fuel cells and water electrolyzers. Anion exchange (alkaline) membrane fuel cells (AEMFCs) enable the use of nonprecious electrocatalysts for the sluggish oxygen reduction reaction (ORR), relative to proton exchange membrane fuel cells (PEMFCs), which require Pt-based electrocatalysts. However, the hydrogen oxidation reaction (HOR) kinetics is significantly slower in alkaline media than in acidic media. Understanding these phenomena requires applying theoretical and experimental methods to unravel molecular-level thermodynamics and kinetics of hydrogen and oxygen electrocatalysis and, particularly, the proton-coupled electron transfer (PCET) process that takes place in a proton-deficient alkaline media. Extensive electrochemical and spectroscopic studies, on single-crystal Pt and metal oxides, have contributed to the development of activity descriptors, as well as the identification of the nature of active sites, and the rate-determining steps of the HOR and ORR. Among these, the structure and reactivity of interfacial water serve as key potential and pH-dependent kinetic factors that are helping elucidate the origins of the HOR and ORR activity differences in acids and bases. Additionally, deliberately modulating and controlling catalyst-support interactions have provided valuable insights for enhancing catalyst accessibility and durability during operation. The design and synthesis of highly conductive and durable alkaline membranes/ionomers have enabled AEMFCs to reach initial performance metrics equal to or higher than those of PEMFCs. We emphasize the importance of using membrane electrode assemblies (MEAs) to integrate the often separately pursued/optimized electrocatalyst/support and membranes/ionomer components. Operando/in situ methods, at multiscales, and ab initio simulations provide a mechanistic understanding of electron, ion, and mass transport at catalyst/ionomer/membrane interfaces and the necessary guidance to achieve fuel cell operation in air over thousands of hours. We hope that this Review will serve as a roadmap for advancing the scientific understanding of the fundamental factors governing electrochemical energy conversion in alkaline media with the ultimate goal of achieving ultralow Pt or precious-metal-free high-performance and durable alkaline fuel cells and related technologies.

Synergistic Effects of Crystal Phase and Strain for N2 Dissociation on Ru(0001) Surfaces with Multilayered Hexagonal Close-Packed Structures

The synergistic effects of strain and crystal phase on the reaction activity of nitrogen molecule dissociation have been studied using density functional theory calculations on Ru(0001) surfaces with multilayered hexagonal close-packed structures. The phase transformation from hexagonal close-packed phase (2H) to face-centered cubic (3C) phase or unconventional phases (4H, DHCP, 6H1, and 6H2) would occur under the uniaxial tensile strain loaded along the c axis. The close-packed surfaces of unconventional crystal phases show an enhanced chemical reactivity for N adsorption due to the upshifted d-band center of Ru. However, the N2 adsorption energy is almost independent of the applied strain and crystal phase. The optimized catalytic activity of Ru(0001) surfaces with the unconventional phases is found for the N2 dissociation through breaking the scaling relationships between the reaction barrier and reaction energy. Our results indicate that the strain-induced phase transformation is an effective method to improve the catalytic activity of noble metal catalysts toward the N2 dissociation reaction.

Catalytic resonance of ammonia synthesis by simulated dynamic ruthenium crystal strain

Ammonia affords dense storage for renewable energy as a fungible liquid fuel, provided it can be efficiently synthesized from hydrogen and nitrogen. In this work, the catalysis of ammonia synthesis was computationally explored beyond the Sabatier limit by dynamically straining a ruthenium crystal (±4%) at the resonant frequencies (10² to 10⁵⁺ Hz) of N₂ surface dissociation and hydrogenation. Density functional theory calculations at different strain conditions indicated that the energies of NH_x surface intermediates and transition states scale linearly, allowing the description of ammonia synthesis at a continuum of strain conditions. A microkinetic model including multiple sites and surface diffusion between step and Ru(0001) terrace sites of varying ratios for nanoparticles of differing size revealed that dynamic strain yields catalytic ammonia synthesis conversion and turnover frequency comparable to industrial reactors (400°C, 200 atm) but at lower temperature (320°C) and an order of magnitude lower pressure (20 atm).

The effect of interlayer stacking arrangements in two dimensional NiOOH on water oxidation catalysis

Electrolysis of water to produce green and renewable hydrogen fuel is of great interest in the clean energy field. Water molecules can be decomposed to hydrogen and oxygen through catalysis. Catalytic materials under electrochemical operation are subject to harsh chemical environments, and as a result mechanical changes may appear in the material. In two dimensional materials, the weak van der Waals (vdW) forces holding the layers together may cause a change in the stacking order of the material. The big challenge is to understand the effect of the interlayer arrangements of two dimensional materials on their catalytic performance. In this research we use Density Functional Theory in order to explore the catalytic performance of β-NiOOH, a two dimensional material that is one of the best known catalysts for the oxygen evolution reaction (OER), under different displacements. Our results indicate that changes in the structural stacking of NiOOH could affect the catalytic properties of the system. Particularly, we find that small shifts between the layers enhance the OER activity by reducing the overpotential down to 240 [mV] due to the formation of an unstable state and the formation of new vdW bonds between the layers. The potential ability to lower the overpotential of NiOOH could give exceptional results in increasing the efficiency of the OER.

Advancing Photoelectrochemical Energy Conversion through Atomic Design of Catalysts

Powered by inexhaustible solar energy, photoelectrochemical (PEC) hydrogen/ammonia production and reduction of carbon dioxide to high added-value chemicals in eco-friendly and mild conditions provide a highly attractive solution to carbon neutrality. Recently, substantial advances have been achieved in PEC systems by improving light absorption and charge separation/transfer in PEC devices. However, less attention is given to the atomic design of photoelectrocatalysts to facilitate the final catalytic reactions occurring at photoelectrode surface, which largely limits the overall photo-to-energy conversion of PEC system. Fundamental catalytic mechanisms and recent progress in atomic design of PEC materials are comprehensively reviewed by engineering of defect, dopant, facet, strain, and single atom to enhance the activity and selectivity. Finally, the emerging challenges and research directions in design of PEC systems for future photo-to-energy conversions are proposed.

Modulation rate on adsorption and catalysis of 2D Pt: the effects of adsorbate-induced surface stress

Recently it is reported for ultrathin 2D metals, positive surface stress of clean surface (τ1) can induce considerable compressive lattice strain towards optimized adsorption energy and catalytic properties (Science 363,...

Potential-dependent C-C coupling mechanism and activity of C2 formation in the electrocatalytic reduction of CO2 on defective Cu(100) surfaces

The potential-dependent C-C coupling mechanism for C₂ formation in the electrocatalytic reduction of CO₂ is studied on several defective Cu(100) surfaces, and a nonmonotonic trend is observed between the effective free energy barriers and the average coordination numbers. Further structural analysis reveals that Cu surface strain along the parallel and vertical directions with respect to the C-C bond would have distinct impacts on the modulation of the barriers.

Two-dimensional materials for electrochemical CO2 reduction: materials, in situ/operando characterizations, and perspective

Electrochemical CO₂ reduction (CO₂ ECR) is an efficient approach to achieving eco-friendly energy generation and environmental sustainability. This approach is capable of lowering the CO₂ greenhouse gas concentration in the atmosphere while producing various valuable fuels and products. For catalytic CO₂ ECR, two-dimensional (2D) materials stand as promising catalyst candidates due to their superior electrical conductivity, abundant dangling bonds, and tremendous amounts of surface active sites. On the other hand, the investigations on fundamental reaction mechanisms in CO₂ ECR are highly demanded but usually require advanced in situ and operando multimodal characterizations. This review summarizes recent advances in the development, engineering, and structure-activity relationships of 2D materials for CO₂ ECR. Furthermore, we overview state-of-the-art in situ and operando characterization techniques, which are used to investigate the catalytic reaction mechanisms with the spatial resolution from the micron-scale to the atomic scale, and with the temporal resolution from femtoseconds to seconds. Finally, we conclude this review by outlining challenges and opportunities for future development in this field.

Rationalization of Nonlinear Adsorption Energy-Strain Relations and Brønsted-Evans-Polanyi and Transition State Scaling Relationships under Strain

Scaling relations play a vital role in high-throughput screening of catalytic materials, and more and more attention is being paid to strain-based regulation of catalytic performance. Here we investigated the variation of several energetics, including adsorption energies in the initial state, transition state, and final state, reaction energies, and energy barriers with strain, by studying CO, BH, NH, CH, and NO adsorption and dissociation on M(111) (M = Cu, Ag, Ni, Pd, or Pt) surfaces. We show that energy barriers, reaction energies, and adsorption energies can vary either linearly or nonlinearly (quadratically) with strain. Systems with stronger adsorbate-substrate interaction and weaker atom-atom interaction in substrates are more likely to exhibit nonlinear relations. The well-known Brønsted-Evans-Polanyi relationships and transition state scaling relationships under strain were also examined, and both of them can be nonlinear under strain, in principle. The observed nonlinear relationships were satisfactorily rationalized with the equations derived from Mechanics of Solids.

Achieving flexible large-scale reactivity tuning by controlling the phase, thickness and support of two-dimensional ZnO

Tuning surface reactivity of catalysts is an effective strategy to enhance catalytic activity towards a chemical reaction. Traditional reactivity tuning usually relies on a change of the catalyst composition, especially when large-scale tuning is desired. Here, based on density functional theory calculations, we provide a strategy for flexible large-scale tuning of surface reactivity, i.e. from a few tenths of electronvolts (eV) to multiple eV, merely through manipulating the phase, thickness, and support of two-dimensional (2D) ZnO films. 2D ZnO films have three typical phases, i.e. graphene, wurtzite, and body-centered-tetragonal structures, whose intrinsic stability strongly depends on the thickness and/or the chemical nature of the support. We show that the adsorption energy of hydrogen differs by up to 3 eV on these three phases. For the same phase, varying the film thickness and/or support can lead to a few tenths of eV to 2 eV tuning of surface reactivity. We further demonstrate that flexible large-scale tuning of surface reactivity has a profound impact on the reaction kinetics, including breaking the Brønsted-Evans-Polanyi relationship.

Imparting CO2 Electroreduction Auxiliary for Integrated Morphology Tuning and Performance Boosting in a Porphyrin-based Covalent Organic Framework

Strategies that enable simultaneous morphology-tuning and electroreduction performance boosting are much desired for the exploration of covalent organic frameworks in efficient CO₂ electroreduction. Herein, a kind of functionalizing exfoliation agent has been selected to simultaneously modify and exfoliate bulk COFs into functional nanosheets and investigate their CO₂ electroreduction performance. The obtained nanosheets (Cu-Tph-COF-Dct) with large-scale (≈1.0 μm) and ultrathin (≈3.8 nm) morphology enable a superior FE_CH4 (≈80 %) (almost doubly enhanced than bare COF) with large current-density (-220.0 mA cm^-2 ) at -0.9 V. The boosted performance can be ascribed to the immobilized functionalizing exfoliation agent (Dct groups) with integrated amino and triazine groups that strengthen CO₂ absorption/activation, stabilize intermediates and enrich the CO concentration around the Cu active sites as revealed by DFT calculations. The point-to-point functionalization strategy for modularly assembling Dct-functionalized COF catalyst for CO₂ electroreduction will open up the attractive possibility of developing COFs as efficient CO₂ RR electrocatalysts.

Identifying the Critical Surface Descriptors for the Negative Slopes in the Adsorption Energy Scaling Relationships via Density Functional Theory and Compressed Sensing

Adsorption energy scaling relationships have progressed beyond their original form, which was primarily focused on optimizing catalytic sites and lowering computational costs in simulations. The recent rise in interest in adsorption energy scaling relations is to investigate surfaces other than transition metals (TMs) as well as interactions involving complex compounds. In this work, we report our extensive study on the scaling relation (SR) between oxygen (O), with elements of neighboring groups such as boron (B), aluminum (Al), carbon (C), silicon (Si), nitrogen (N), phosphorus (P), and fluorine (F) on magnetic bimetallic surfaces. We observed that only O versus N and F seems to have a positive slope; the other slopes are negative. We present new theoretical model in terms of multiple surface descriptors using density functional theory and compressed sensing, whereas the original scaling theory was based on a single adsorbate descriptor: adsorbate valency.

In Situ Precise Tuning of Bimetallic Electronic Effect for Boosting Oxygen Reduction Catalysis

Tuning intermediate adsorption energy by shifting the d-band center offers a powerful strategy to tailor the reactivity of metal catalysts. Here we report a potential sweep method to grow Pd layer-by-layer on Au with the capability to in situ measure the surface structure through an ethanol oxidation reaction. Spectroscopic characterizations reveal charge-transfer induced valence band restructuring in the Pd overlayer, which shifts the d-band center away from the Fermi level compared to bulk Pd. Precise overlayer control gives the optimal bimetallic surface of two monolayers (ML) Pd on Au, which exhibits more than 370-fold mass activity enhancement in oxygen reduction reaction (at 0.9 V vs. reversible hydrogen electrode) and 40 mV increase in half-wave potential compared to the Pt/C. Tested in a homemade Zn-air battery, the 2-ML-Pd/Au/C exhibits a maximum power density of 296 mW/cm² and specific activity of 804 mAh/g_Zn, much higher than Pt/C with the same catalyst loading amount.

Compensation Effect Exhibited by Gold Bimetallic Nanoparticles during CO Oxidation

While CO oxidation catalyzed by gold nanoparticles has been practiced academically for several decades, there are still important discoveries to be made. One area of current interest is to pair Au with another alloying metal and observe the catalytic consequences of the presence of the other metal. In this work, TiO₂-supported bimetallic Au nanoparticles are alloyed with Cu, Co, Ni, Pd, and Ru and used as catalysts for CO oxidation. Two synthetic methods for the alloys are presented: a strong electrostatic adsorption (SEA) method and a sterically demanding ligand synthesis (SDLS) method which uses triphenylphosphine (TPP) as the ligand. The catalytic performance of the materials synthesized with the SEA and SDLS methods is compared in CO oxidation. The results indicate that the materials tested present an enthalpy-entropy compensation effect. Interestingly, both the enthalpy of activation, ΔH ^‡, and the entropy of activation, ΔS ^‡, generally decrease with particle size. AuCo and AuRu materials exhibit a decrease in the overall activity as compared to Au and the other Au alloys when synthesized via SEA. Au face-centered-cubic alloys AuCu, AuNi, and AuPd prepared via SEA show an improvement in activity compared to monometallic Au in our reaction conditions. In situ diffuse reflectance infrared Fourier transform spectroscopy presents two distinct regions for Au bimetallics where AuCo and AuRu show peak positions in the region of 2070-2050 cm^-1, indicating a weaker interaction for AuCo and AuRu with CO when compared to that of the other alloys. For the SDLS method samples, the hypothesis is that TPP would enhance the CO oxidation rate by enhancing the charge transfer to the metallic surface. The results indicate that SDLS samples have lower CO oxidation rates and if any charge transfer occurs, it is masked by the lateral interactions of the CO π bonds and the phenyl groups of TPP.

Twin boundary migration in an individual platinum nanocrystal during catalytic CO oxidation

At the nanoscale, elastic strain and crystal defects largely influence the properties and functionalities of materials. The ability to predict the structural evolution of catalytic nanocrystals during the reaction is of primary importance for catalyst design. However, to date, imaging and characterising the structure of defects inside a nanocrystal in three-dimensions and in situ during reaction has remained a challenge. We report here an unusual twin boundary migration process in a single platinum nanoparticle during CO oxidation using Bragg coherent diffraction imaging as the characterisation tool. Density functional theory calculations show that twin migration can be correlated with the relative change in the interfacial energies of the free surfaces exposed to CO. The x-ray technique also reveals particle reshaping during the reaction. In situ and non-invasive structural characterisation of defects during reaction opens new avenues for understanding defect behaviour in confined crystals and paves the way for strain and defect engineering.

Progress of Nonprecious-Metal-Based Electrocatalysts for Oxygen Evolution in Acidic Media

Water oxidation, or the oxygen evolution reaction (OER), which combines two oxygen atoms from two water molecules and releases one oxygen molecule, plays the key role by providing protons and electrons needed for the hydrogen generation, electrochemical carbon dioxide reduction, and nitrogen fixation. The multielectron transfer OER process involves multiple reaction intermediates, and a high overpotential is needed to overcome the sluggish kinetics. Among the different water splitting devices, proton exchange membrane (PEM) water electrolyzer offers greater advantages. However, current anode OER electrocatalysts in PEM electrolyzers are limited to precious iridium and ruthenium oxides. Developing highly active, stable, and precious-metal-free electrocatalysts for water oxidation in acidic media is attractive for the large-scale application of PEM electrolyzers. In recent years, various types of precious-metal-free catalysts such as carbon-based materials, earth-abundant transition metal oxides, and multiple metal oxide mixtures have been investigated and some of them show promising activity and stability for acidic OER. In this review, the thermodynamics of water oxidation, Pourbaix diagram of metal elements in aqueous solution, and theoretical screening and prediction of precious-metal-free electrocatalysts for acidic OER are first elaborated. The catalytic performance, reaction kinetics, and mechanisms together with future research directions regarding acidic OER are summarized and discussed.

Electrochemically Induced Strain Evolution in Pt-Ni Alloy Nanoparticles Observed by Bragg Coherent Diffraction Imaging

Strain is known to enhance the activity of the oxygen reduction reaction in catalytic platinum alloy nanoparticles, whose inactivity is the primary impediment to efficient fuel cells and metal-air batteries. Bragg coherent diffraction imaging (BCDI) was employed to reveal the strain evolution during the voltammetric cycling in Pt-Ni alloy nanoparticles composed of Pt₂Ni₃, Pt₁Ni₁, and Pt₃Ni₂. Analysis of the 3D strain images using a core-shell model shows that the strain as large as 5% is induced on Pt-rich shells due to Ni dissolution. The composition dependency of the strain on the shells is in excellent agreement with that of the catalytic activity. The present study demonstrates that BCDI enables quantitative determination of the strain on alloy nanoparticles during electrochemical reactions, which provides a means to exploit surface strain to design a wide range of electrocatalysts.

A Comparative Study of Oxygen and Hydrogen Adsorption on Strained and Alloy-Supported Pt(111) Monolayers

A comparative study of the unreacted and reacted uniaxially strained Pt(111) and the layered (111)-Pt/Ni/Pt3Ni and (111)-Pt/Ni/PtNi3 surfaces has been performed using density functional theory (DFT). An in-depth study of the unreacted surfaces has been performed to evaluate the importance of geometric, magnetic and ligand effects in determining the reactivity of these different Pt surfaces. An analysis of the binding energies of oxygen and hydrogen over the high-symmetry binding positions of all surfaces has been performed. The study has shown that O and H tend to bind more strongly to the (111)-Pt/Ni/Pt3Ni surface and less strongly to the (111)-Pt/Ni/PtNi3 surface compared to binding on the equivalently strained Pt(111) surfaces. Changes in the surface magnetisation of the surfaces overlaying the ferromagnetic alloys during adsorption are discussed, as well as the behaviour of the d-band centre across all surfaces, to evaluate the potential mechanisms for these differences in binding. An accompanying comparison of the accessible density functionals has been included to estimate the error in the computational binding energies.

Stable, Efficient, Copper Coordination Polymer-Derived Heterostructured Catalyst for Oxygen Evolution under pH-Universal Conditions

The constructure of a heterostructured interface is an effective way to design highly durable and efficient water oxidation electrocatalysts. Herein, Cu/CuCN with heterointerfaces is the first synthesized case through a simple epitaxial-like growth method, displaying superior activity and stability under pH-universal media. Associated with high electron transport and transfer of the epitaxial interfacial area, the Cu/CuCN pre-catalyst is applied to deliver the oxygen evolution reaction (OER) with lower overpotentials of 250 mV (forward scan) and 380 mV (backward scan) at 10 mA cm^-2 and demonstrates better intrinsic activity (j_ECSA of 1.0 mA cm^-2 at 420 mV) and impressive stability (136 h) in 1.0 M KOH, which exceeds most previous catalysts. Even using a nominal voltage of 1.5 V of a AA battery can drive the overall water-splitting setup. Experiments combined with theoretical simulations further uncover the existence of CuO species at the heterointerface during basic OER, which is evidence of better OER performance with abundant active sites that accelerate the conversion kinetics.

Deciphering the Local Environment of Single-Atom Catalysts with X-ray Absorption Spectroscopy

ConspectusTo improve the reactivity of catalysts, two goals that are perhaps the most obvious but at the same time the most elusive ones are (1) to increase the number of active sites and/or (2) to enhance the intrinsic activity of each active site. Both seem realizable in single-atom catalysts (SACs), in which in principle all of the metal sites could be active sites. The enhanced reactivity of SACs and their unique reaction mechanisms originate from their unique structures and interactions with supports. The details of these structures are therefore the focus of intense investigation and debates. Among the factors hindering the progress in their investigation is the complexity of SAC systems, which is primarily related to the heterogeneity in their structures within the same sample. In this Account, we outline strategies that we have found to be useful for selected systems we have studied that can also be applied to many other SACs.As an example of the most uniformly distributed SAC system, we focus on a Pt SAC support on nanoceria. A combination of imaging and spectroscopic techniques confirmed the atomic dispersion of Pt and the uniform distribution of Pt²⁺ single-atom sites. That uniformity was a prerequisite for determining the three-dimensional structure of Pt single atoms on the support surface. Our work illuminated the dependence of the structure and dynamics of Pt single atoms on the type of support. For Pt/ceria SACs, upon breaking of the Pt-O-Ce interaction at high temperatures under reductive conditions, the SACs aggregated into Pt nanoparticles that were active for the water gas shift reaction. In contrast, when Pt single atoms were anchored on the surface of a Co₃O₄ support, the removal of O in H₂ at high temperatures resulted in the formation of Pt₁Co_m/Co₃O₄ single-atom alloys (SAAs), which showed high N₂ selectivity for NO reduction. In SAAs with increased complexity, when the interparticle distribution of compositions of catalytically active species is narrow, advanced methods of X-ray absorption near-edge structure (XANES) analysis, e.g., those employing machine learning, allow their placements within "representative" particles to be deciphered and their changes in reaction conditions to be tracked.Increasing the level of heterogeneity in the binding sites available to SACs blurs the resolution of spectroscopic methods such as X-ray absorption fine structure (XAFS) spectroscopy for detecting the details of their environments. We illustrate the effects of heterogeneity of the distribution of singly dispersed metal active sites using the PtNi/SBA-15 bimetallic catalyst as an example. In this system, the fact that Ni atoms existed in two types of species (the silicate phase and the PtNi nanoclusters) complicated the XAFS analysis, although when corrections for the silicate phase were applied, the results obtained from extended XAFS (EXAFS) data analysis helped to determine the three-dimensional structure of the PtNi nanoclusters.While not a review of the field, this Account is aimed to share with the readers our efforts to resolve challenges due to many forms of structural complexity existing in most heterogeneous single-atom systems and obtain insights into the unique atomic structures, as inferred from the correlative use of multimodal characterization tools and advances in data analysis and modeling methods that we developed.

Perpendicular and in-plane hole asymmetry in a strained NiFe2O4film

Strained materials can exhibit drastically modified physical properties in comparison to their fully relaxed analogues. We report on the x-ray absorption spectra (XAS) and magnetic circular dichroism (XMCD) of a strained NiFe₂O₄inverse spinel film grown on a symmetry matched single crystal MgGa₂O₄substrate. The Ni XAS spectra exhibit a sizable difference in the white line intensity for measurements with the x-ray electric field parallel to the film plane (normal incidence) vs when the electric field is at an angle (off-normal). A considerable difference is also observed in the FeL_2,3XMCD spectrum. Modeling of the XAS and XMCD spectra indicate that the modified energy ordering of the cation 3dstates in the strained film leads to a preferential filling of 3dstates with out-of-plane character. In addition, the results point to the utility of x-ray spectroscopy in identifying orbital populations even with elliptically polarized x-rays.

The impact of alloying on defect-free nanoparticles exhibiting softer but tougher behavior

The classic paradigm of physical metallurgy is that the addition of alloying elements to metals increases their strength. It is less known if the solution-hardening can occur in nano-scale objects, and it is totally unknown how alloying can impact the strength of defect-free faceted nanoparticles. Purely metallic defect-free nanoparticles exhibit an ultra-high strength approaching the theoretical limit. Tested in compression, they deform elastically until the nucleation of the first dislocation, after which they collapse into a pancake shape. Here, we show by experiments and atomistic simulations that the alloying of Ni nanoparticles with Co reduces their ultimate strength. This counter-intuitive solution-softening effect is explained by solute-induced local spatial variations of the resolved shear stress, causing premature dislocation nucleation. The subsequent particle deformation requires more work, making it tougher. The emerging compromise between strength and toughness makes alloy nanoparticles promising candidates for applications.

Selectivity Map for the Late Stages of CO and CO2 Reduction to C2 Species on Copper Electrodes

The electrochemical CO and CO₂ reduction reactions (CORR and CO₂ RR) using copper catalysts and renewable electricity hold promise as a carbon-neutral route to produce commodity chemicals and fuels. However, the exact mechanisms and structure sensitivity of Cu electrodes toward C₂ products are still under debate. Herein, we investigate ethylene oxide reduction (EOR) as a proxy to the late stages of CORR to ethylene, and the results are compared to those of acetaldehyde reduction to ethanol. Density functional theory (DFT) calculations show that ethylene oxide undergoes ring opening before exclusively reducing to ethylene via *OH formation. Based on generalized coordination numbers (CN), a selectivity map for the late stages of CORR and CO₂ RR shows that sites with moderate coordination (5.9 < CN < 7.5) are efficient for ethylene production, with pristine Cu(100) being more active than defective surfaces such as Cu(311). In contrast, kinks and edges are more active for ethanol production, while (111) terraces are relatively inert.

What Atomic Positions Determines Reactivity of a Surface? Long-Range, Directional Ligand Effects in Metallic Alloys

Ligand and strain effects can tune the adsorption energy of key reaction intermediates on a catalyst surface to speed up rate-limiting steps of the reaction. As novel fields like high-entropy alloys emerge, understanding these effects on the atomic structure level is paramount: What atoms near the binding site determine the reactivity of the alloy surface? By statistical analysis of 2000 density functional theory calculations and subsequent host/guest calculations, it is shown that three atomic positions in the third layer of an fcc(111) metallic structure fourth-nearest to the adsorption site display significantly increased influence on reactivity over any second or third nearest atomic positions. Subsequently observed in multiple facets and host metals, the effect cannot be explained simply through the d-band model or a valence configuration model but rather by favorable directions of interaction determined by lattice geometry and the valence difference between host and guest elements. These results advance the general understanding of how the electronic interaction of different elements affect adsorbate-surface interactions and will contribute to design principles for rational catalyst discovery of better, more stable and energy efficient catalysts to be employed in energy conversion, fuel cell technologies, and industrial processes.

High-entropy materials for catalysis: A new frontier

Entropy plays a pivotal role in catalysis, and extensive research efforts have been directed to understanding the enthalpy-entropy relationship that defines the reaction pathways of molecular species. On the other side, surface of the catalysts, entropic effects have been rarely investigated because of the difficulty in deciphering the increased complexities in multicomponent systems. Recent advances in high-entropy materials (HEMs) have triggered broad interests in exploring entropy-stabilized systems for catalysis, where the enhanced configurational entropy affords a virtually unlimited scope for tailoring the structures and properties of HEMs. In this review, we summarize recent progress in the discovery and design of HEMs for catalysis. The correlation between compositional and structural engineering and optimization of the catalytic behaviors is highlighted for high-entropy alloys, oxides, and beyond. Tuning composition and configuration of HEMs introduces untapped opportunities for accessing better catalysts and resolving issues that are considered challenging in conventional, simple systems.

Rational strain engineering of single-atom ruthenium on nanoporous MoS2 for highly efficient hydrogen evolution

Maximizing the catalytic activity of single-atom catalysts is vital for the application of single-atom catalysts in industrial water-alkali electrolyzers, yet the modulation of the catalytic properties of single-atom catalysts remains challenging. Here, we construct strain-tunable sulphur vacancies around single-atom Ru sites for accelerating the alkaline hydrogen evolution reaction of single-atom Ru sites based on a nanoporous MoS₂-based Ru single-atom catalyst. By altering the strain of this system, the synergistic effect between sulphur vacancies and Ru sites is amplified, thus changing the catalytic behavior of active sites, namely, the increased reactant density in strained sulphur vacancies and the accelerated hydrogen evolution reaction process on Ru sites. The resulting catalyst delivers an overpotential of 30 mV at a current density of 10 mA cm^-2, a Tafel slope of 31 mV dec^-1, and a long catalytic lifetime. This work provides an effective strategy to improve the activities of single-atom modified transition metal dichalcogenides catalysts by precise strain engineering.